Dumping 129 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list) info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list) info.capabilities = {'cpufreq_control'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.acpi.linux.version = '20080926' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.is_powersave_set = false (bool) power_management.quirk.dpms_on = true (bool) power_management.quirk.dpms_suspend = true (bool) power_management.quirk.vbe_post = true (bool) power_management.quirk.vbemode_restore = true (bool) power_management.quirk.vbestate_restore = true (bool) power_management.quirk.vga_mode_3 = true (bool) power_management.type = 'acpi' (string) system.board.product = '0K5547' (string) system.board.serial = '.9QFHH71.CN1296154F3865.' (string) system.board.vendor = 'Dell Inc.' (string) system.board.version = '' (string) system.chassis.manufacturer = 'Dell Inc.' (string) system.chassis.type = 'Portable' (string) system.firmware.release_date = '09/28/2005' (string) system.firmware.vendor = 'Dell Inc.' (string) system.firmware.version = 'A09' (string) system.formfactor = 'laptop' (string) system.hardware.primary_video.product = 21600 (0x5460) (int) system.hardware.primary_video.vendor = 4098 (0x1002) (int) system.hardware.product = 'Inspiron 6000' (string) system.hardware.serial = '9QFHH71' (string) system.hardware.uuid = '44454C4C-5100-1046-8048-B9C04F483731' (string) system.hardware.vendor = 'Dell Inc.' (string) system.hardware.version = '' (string) system.kernel.machine = 'i686' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.28-11-generic' (string) system.kernel.version.major = 2 (0x2) (int) system.kernel.version.micro = 28 (0x1c) (int) system.kernel.version.minor = 6 (0x6) (int) udi = '/org/freedesktop/Hal/devices/net_86_30_66_54_56_21' info.capabilities = {'net', 'net.bridge'} (string list) info.category = 'net.bridge' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Bridge Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_86_30_66_54_56_21' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/pan0' (string) net.address = '86:30:66:54:56:21' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.bridge.mac_address = 147542433355297 (0x863066545621) (uint64) net.interface = 'pan0' (string) net.linux.ifindex = 4 (0x4) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' access_control.file = '/dev/snd/timer' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' access_control.file = '/dev/sequencer2' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' access_control.file = '/dev/sequencer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' access_control.file = '/dev/snd/seq' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' access_control.file = '/dev/input/event3' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event3' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event7' (string) input.product = 'Video Bus' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'evdev' (string) linux.device_file = '/dev/input/event7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/device:22/input/input7/event7' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' button.has_state = true (bool) button.state.value = false (bool) button.type = 'lid' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.switch', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Lid Switch' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string) input.device = '/dev/input/event0' (string) input.product = 'Lid Switch' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Pentium(R) M processor 2.00GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/net_computer_loopback' info.capabilities = {'net', 'net.loopback'} (string list) info.category = 'net.loopback' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Loopback device Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/lo' (string) net.address = '00:00:00:00:00:00' (string) net.arp_proto_hw_id = 772 (0x304) (int) net.interface = 'lo' (string) net.linux.ifindex = 1 (0x1) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' button.has_state = false (bool) button.type = 'sleep' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sleep Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event2' (string) input.product = 'Sleep Button (CM)' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event1' (string) input.product = 'Power Button (CM)' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' battery.charge_level.current = 60162 (0xeb02) (int) battery.charge_level.design = 79920 (0x13830) (int) battery.charge_level.last_full = 60162 (0xeb02) (int) battery.charge_level.percentage = 100 (0x64) (int) battery.charge_level.rate = 11 (0xb) (int) battery.is_rechargeable = true (bool) battery.model = 'DELL D55515' (string) battery.present = true (bool) battery.rechargeable.is_charging = false (bool) battery.rechargeable.is_discharging = false (bool) battery.reporting.current = 7200 (0x1c20) (int) battery.reporting.design = 7200 (0x1c20) (int) battery.reporting.last_full = 5420 (0x152c) (int) battery.reporting.rate = 1 (0x1) (int) battery.reporting.technology = 'Li-ion' (string) battery.reporting.unit = 'mAh' (string) battery.serial = '30172' (string) battery.technology = 'lithium-ion' (string) battery.type = 'primary' (string) battery.vendor = 'SMP-PA' (string) battery.voltage.current = 12494 (0x30ce) (int) battery.voltage.design = 11100 (0x2b5c) (int) battery.voltage.unit = 'mV' (string) info.capabilities = {'battery'} (string list) info.category = 'battery' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'DELL D55515' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC' ac_adapter.present = true (bool) info.capabilities = {'ac_adapter'} (string list) info.category = 'ac_adapter' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic AC Adapter Device' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/AC' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_2' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.linux.driver = 'rtc_cmos' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' info.linux.driver = 'i8042 aux' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PS/2 Port for PS/2-style Mice' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'PS/2 Port for PS/2-style Mice' (string) pnp.id = 'PNP0f13' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_1' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PCI Bus' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'PCI Bus' (string) pnp.id = 'PNP0a03' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.linux.driver = 'pcspkr' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' info.capabilities = {'input'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) info.product = 'PC Speaker' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string) input.device = '/dev/input/event8' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) input.product = 'PC Speaker' (string) linux.device_file = '/dev/input/event8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input8/event8' (string) udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' info.linux.driver = 'iTCO_wdt' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (iTCO_wdt)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' (string) platform.id = 'iTCO_wdt' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.linux.driver = 'atkbd' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'hal-setup-keymap', 'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.keymap', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event4' (string) input.keymap.data = {'e001:playpause', 'e002:stopcd', 'e003:previoussong', 'e004:nextsong', 'e005:brightnessdown', 'e006:brightnessup', 'e007:battery', 'e008:wlan', 'e009:ejectclosecd', 'e00a:suspend', 'e00b:switchvideomode', 'e00f:switchvideomode', 'e010:previoussong', 'e011:prog1', 'e012:media', 'e013:f23', 'e015:camera', 'e00c:f23', 'e019:nextsong', 'e01b:switchvideomode', 'e022:playpause', 'e024:stopcd', 'e06d:media'} (string list) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'evdev' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input4/event4' (string) udi = '/org/freedesktop/Hal/devices/platform_eisa_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (eisa.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/eisa.0' (string) platform.id = 'eisa.0' (string) udi = '/org/freedesktop/Hal/devices/platform_dcdbas' info.linux.driver = 'dcdbas' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (dcdbas)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/dcdbas' (string) platform.id = 'dcdbas' (string) udi = '/org/freedesktop/Hal/devices/dell_lcd_panel' info.addons = {'hald-addon-dell-backlight'} (string list) info.capabilities = {'laptop_panel'} (string list) info.category = 'laptop_panel' (string) info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list) info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) info.product = 'Dell Laptop Panel' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/dell_lcd_panel' (string) laptop_panel.access_method = 'custom' (string) laptop_panel.brightness_in_hardware = true (bool) laptop_panel.num_levels = 8 (0x8) (int) udi = '/org/freedesktop/Hal/devices/dell_wwan_switch' info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) info.product = 'Dell WWAN Switch' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/dell_wwan_switch' (string) killswitch.access_method = 'dell' (string) killswitch.type = 'wwan' (string) org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list) org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list) udi = '/org/freedesktop/Hal/devices/dell_wlan_switch' info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) info.product = 'Dell WLAN Switch' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/dell_wlan_switch' (string) killswitch.access_method = 'dell' (string) killswitch.type = 'wlan' (string) org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list) org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list) udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch' info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) info.product = 'Dell Bluetooth Switch' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch' (string) killswitch.access_method = 'dell' (string) killswitch.type = 'bluetooth' (string) org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list) org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list) udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (Fixed MDIO bus.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0' (string) platform.id = 'Fixed MDIO bus.0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2653' info.linux.driver = 'ata_piix' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FBM (ICH6M) SATA Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2653' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 128 (0x80) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.product = '82801FBM (ICH6M) SATA Controller' (string) pci.product_id = 9811 (0x2653) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/scsi_host/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 1 (0x1) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'DVD+-RW ND-6500A' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = '_NEC' (string) udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A' access_control.file = '/dev/sr0' (string) access_control.type = 'cdrom' (string) block.device = '/dev/sr0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0_scsi_device_lun0' (string) info.product = 'DVD+-RW ND-6500A' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A' (string) info.vendor = '_NEC' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'pci' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdram = false (bool) storage.cdrom.dvdrdl = false (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 4234 (0x108a) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 4234 (0x108a) (int) storage.cdrom.write_speeds = {'4234', '2822', '1764', '1411', '706'} (string list) storage.drive_type = 'cdrom' (string) storage.firmware_version = '203D' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'DVD+-RW ND-6500A' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = '_NEC' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0_scsi_device_lun0_scsi_generic' access_control.file = '/dev/sg1' (string) access_control.type = 'cdrom' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'scsi_generic', 'access_control'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_0_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/scsi_host/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'ST980815A' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST980815A_5LYCTRPE' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST980815A_5LYCTRPE' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_scsi_device_lun0' (string) info.product = 'ST980815A' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST980815A_5LYCTRPE' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda' (string) storage.automount_enabled_hint = false (bool) storage.bus = 'pci' (string) storage.drive_type = 'disk' (string) storage.firmware_version = 'n_a' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'ST980815A' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 80026361856 (0x12a1f16000) (uint64) storage.requires_eject = false (bool) storage.serial = 'SATA_ST980815A_5LYCTRPE' (string) storage.size = 80026361856 (0x12a1f16000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' block.device = '/dev/sda2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST980815A_5LYCTRPE' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST980815A_5LYCTRPE' (string) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string) volume.block_size = 512 (0x200) (int) volume.fstype = '' (string) volume.fsusage = 'partitiontable' (string) volume.fsversion = '' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2 (0x2) (uint64) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 76717186560 (0x11dcb35e00) (uint64) volume.partition.type = '0x05' (string) volume.partition.uuid = '' (string) volume.size = 1024 (0x400) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_68d66498_7073_48d3_b341_4fde71ead1a7' block.device = '/dev/sda5' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 5 (0x5) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST980815A_5LYCTRPE' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST980815A_5LYCTRPE' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_68d66498_7073_48d3_b341_4fde71ead1a7' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 6458067 (0x628ad3) (uint64) volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64) volume.partition.number = 5 (0x5) (int) volume.partition.start = 76717218816 (0x11dcb3dc00) (uint64) volume.size = 3306530304 (0xc515a600) (uint64) volume.uuid = '68d66498-7073-48d3-b341-4fde71ead1a7' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_4cac3912_fe27_412b_a0f8_fa1404c42c8d' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST980815A_5LYCTRPE' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST980815A_5LYCTRPE' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4cac3912_fe27_412b_a0f8_fa1404c42c8d' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/' (string) volume.num_blocks = 149838192 (0x8ee5970) (uint64) volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.start = 32256 (0x7e00) (uint64) volume.size = 76717154304 (0x11dcb2e000) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '4cac3912-fe27-412b-a0f8-fa1404c42c8d' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2653_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2641' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FBM (ICH6M) LPC Interface Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2641' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.product = '82801FBM (ICH6M) LPC Interface Bridge' (string) pci.product_id = 9793 (0x2641) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_266d' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266d' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.3' (string) pci.device_class = 7 (0x7) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.3' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller' (string) pci.product_id = 9837 (0x266d) (int) pci.subsys_product_id = 21539 (0x5423) (int) pci.subsys_vendor = 'Conexant Systems, Inc.' (string) pci.subsys_vendor_id = 5361 (0x14f1) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_266e' info.linux.driver = 'Intel ICH' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller' (string) pci.product_id = 9838 (0x266e) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e' (string) info.product = 'Intel ICH6 with STAC9752,53 Sound Card' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'Intel ICH6 with STAC9752,53' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_playback_4' access_control.file = '/dev/snd/pcmC0D4p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'Intel ICH6 with STAC9752,53' (string) alsa.device = 4 (0x4) (int) alsa.device_file = '/dev/snd/pcmC0D4p' (string) alsa.device_id = 'Intel ICH6 - IEC958' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 - IEC958 ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_playback_4' (string) linux.device_file = '/dev/snd/pcmC0D4p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D4p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_3' access_control.file = '/dev/snd/pcmC0D3c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'Intel ICH6 with STAC9752,53' (string) alsa.device = 3 (0x3) (int) alsa.device_file = '/dev/snd/pcmC0D3c' (string) alsa.device_id = 'Intel ICH6 - ADC2' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 - ADC2 ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_3' (string) linux.device_file = '/dev/snd/pcmC0D3c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D3c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_2' access_control.file = '/dev/snd/pcmC0D2c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'Intel ICH6 with STAC9752,53' (string) alsa.device = 2 (0x2) (int) alsa.device_file = '/dev/snd/pcmC0D2c' (string) alsa.device_id = 'Intel ICH6 - MIC2 ADC' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 - MIC2 ADC ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_2' (string) linux.device_file = '/dev/snd/pcmC0D2c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D2c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_1' access_control.file = '/dev/snd/pcmC0D1c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'Intel ICH6 with STAC9752,53' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/pcmC0D1c' (string) alsa.device_id = 'Intel ICH6 - MIC ADC' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 - MIC ADC ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_1' (string) linux.device_file = '/dev/snd/pcmC0D1c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D1c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC0D0p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'Intel ICH6 with STAC9752,53' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'Intel ICH6' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC0D0c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'Intel ICH6 with STAC9752,53' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'Intel ICH6' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 OSS Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'Intel ICH6 with STAC9752,53' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'Intel ICH6' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'Intel ICH6 with STAC9752,53' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'Intel ICH6' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'Intel ICH6 with STAC9752,53' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 with STAC9752,53 ALSA Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'Intel ICH6 with STAC9752,53' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'Intel ICH6' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_1' access_control.file = '/dev/adsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) info.product = 'Intel ICH6 OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_1' (string) linux.device_file = '/dev/adsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/adsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'Intel ICH6 with STAC9752,53' (string) oss.device = 1 (0x1) (int) oss.device_file = '/dev/adsp' (string) oss.device_id = 'Intel ICH6' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2448' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801 Mobile PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.product = '82801 Mobile PCI Bridge' (string) pci.product_id = 9288 (0x2448) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_4223' info.linux.driver = 'ipw2200' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'PRO/Wireless 2915ABG [Calexico2] Network Connection' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_4223' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:03.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:03.0' (string) pci.product = 'PRO/Wireless 2915ABG [Calexico2] Network Connection' (string) pci.product_id = 16931 (0x4223) (int) pci.subsys_product_id = 4128 (0x1020) (int) pci.subsys_vendor = 'Intel Corporation' (string) pci.subsys_vendor_id = 32902 (0x8086) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/net_00_12_f0_4a_be_e9' info.capabilities = {'net', 'net.80211'} (string list) info.category = 'net.80211' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4223' (string) info.product = 'WLAN Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_12_f0_4a_be_e9' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:03.0/net/eth1' (string) net.80211.mac_address = 81340841705 (0x12f04abee9) (uint64) net.address = '00:12:f0:4a:be:e9' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth1' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4223' (string) udi = '/org/freedesktop/Hal/devices/pci_1180_822' info.linux.driver = 'sdhci-pci' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1180_822' (string) info.vendor = 'Ricoh Co Ltd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.2' (string) pci.device_class = 8 (0x8) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.2' (string) pci.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' (string) pci.product_id = 2082 (0x822) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Ricoh Co Ltd' (string) pci.vendor_id = 4480 (0x1180) (int) udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host' info.capabilities = {'mmc_host'} (string list) info.category = 'mmc_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1180_822' (string) info.product = 'MMC/SD Host Adapter' (string) info.subsystem = 'mmc_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'mmc_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.2/mmc_host/mmc0' (string) mmc_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_1180_552' info.linux.driver = 'ohci1394' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'R5C552 IEEE 1394 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1180_552' (string) info.vendor = 'Ricoh Co Ltd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.1' (string) pci.product = 'R5C552 IEEE 1394 Controller' (string) pci.product_id = 1362 (0x552) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Ricoh Co Ltd' (string) pci.vendor_id = 4480 (0x1180) (int) udi = '/org/freedesktop/Hal/devices/pci_1180_476' info.linux.driver = 'yenta_cardbus' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'RL5c476 II' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1180_476' (string) info.vendor = 'Ricoh Co Ltd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 7 (0x7) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.0' (string) pci.product = 'RL5c476 II' (string) pci.product_id = 1142 (0x476) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Ricoh Co Ltd' (string) pci.vendor_id = 4480 (0x1180) (int) udi = '/org/freedesktop/Hal/devices/pci_14e4_170c' info.linux.driver = 'b44' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'BCM4401-B0 100Base-TX' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14e4_170c' (string) info.vendor = 'Broadcom Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0' (string) pci.product = 'BCM4401-B0 100Base-TX' (string) pci.product_id = 5900 (0x170c) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Broadcom Corporation' (string) pci.vendor_id = 5348 (0x14e4) (int) udi = '/org/freedesktop/Hal/devices/ssb__null_' info.bus = 'ssb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14e4_170c' (string) info.subsystem = 'ssb' (string) info.udi = '/org/freedesktop/Hal/devices/ssb__null_' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'ssb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:1' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:1' (string) ssb.bus_id = 'ssb0:1' (string) udi = '/org/freedesktop/Hal/devices/net_00_11_43_78_8f_e2' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_11_43_78_8f_e2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0' (string) net.80203.mac_address = 74146418658 (0x1143788fe2) (uint64) net.address = '00:11:43:78:8f:e2' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/ssb__null_' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/ssb__null_' info.bus = 'ssb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14e4_170c' (string) info.subsystem = 'ssb' (string) info.udi = '/org/freedesktop/Hal/devices/ssb__null_' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'ssb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:1' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:1' (string) ssb.bus_id = 'ssb0:1' (string) udi = '/org/freedesktop/Hal/devices/net_00_11_43_78_8f_e2' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_11_43_78_8f_e2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0' (string) net.80203.mac_address = 74146418658 (0x1143788fe2) (uint64) net.address = '00:11:43:78:8f:e2' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/ssb__null_' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_8086_265c' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_265c' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller' (string) pci.product_id = 9820 (0x265c) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_265c' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 8 (0x8) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:1d.7' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'USB-2.0 4-Port HUB' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) info.vendor = 'Genesys Logic, Inc.' (string) linux.device_file = '/dev/bus/usb/001/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 1794 (0x702) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 4 (0x4) (int) usb_device.product = 'USB-2.0 4-Port HUB' (string) usb_device.product_id = 1544 (0x608) (int) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Genesys Logic, Inc.' (string) usb_device.vendor_id = 1507 (0x5e3) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 1794 (0x702) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 4 (0x4) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1544 (0x608) (int) usb.speed = 480.0 (480) (double) usb.vendor = 'Genesys Logic, Inc.' (string) usb.vendor_id = 1507 (0x5e3) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) info.product = 'USB-2.0 4-Port HUB' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_0' (string) info.vendor = 'Genesys Logic, Inc.' (string) linux.device_file = '/dev/bus/usb/001/006' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.4' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 1794 (0x702) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 6 (0x6) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.4' (string) usb_device.max_power = 500 (0x1f4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 4 (0x4) (int) usb_device.product = 'USB-2.0 4-Port HUB' (string) usb_device.product_id = 1544 (0x608) (int) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Genesys Logic, Inc.' (string) usb_device.vendor_id = 1507 (0x5e3) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.4/1-6.4:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 1794 (0x702) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 6 (0x6) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.4/1-6.4:1.0' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 4 (0x4) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1544 (0x608) (int) usb.speed = 480.0 (480) (double) usb.vendor = 'Genesys Logic, Inc.' (string) usb.vendor_id = 1507 (0x5e3) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_5008_53FSL61' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_0' (string) info.product = 'Dell Photo Printer 720' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_5008_53FSL61' (string) info.vendor = 'Dell Computer Corp.' (string) linux.device_file = '/dev/bus/usb/001/007' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.4/1-6.4.4' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 7 (0x7) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.4/1-6.4.4' (string) usb_device.max_power = 4 (0x4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Dell Photo Printer 720' (string) usb_device.product_id = 20488 (0x5008) (int) usb_device.serial = '53FSL61' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Dell Computer Corp.' (string) usb_device.vendor_id = 16700 (0x413c) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_5008_53FSL61_if0' info.addons = {'hal_lpadmin --add'} (string list) info.callouts.remove = {'hal_lpadmin --remove'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.Printer'} (string list) info.linux.driver = 'usblp' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_5008_53FSL61' (string) info.product = 'USB Printer Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_5008_53FSL61_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.4/1-6.4.4/1-6.4.4:1.0' (string) org.freedesktop.Hal.Device.Printer.method_argnames = {'make model'} (string list) org.freedesktop.Hal.Device.Printer.method_execpaths = {'hal_lpadmin --configure'} (string list) org.freedesktop.Hal.Device.Printer.method_names = {'Configure'} (string list) org.freedesktop.Hal.Device.Printer.method_signatures = {'ss'} (string list) printer.commandset = {'CPDNPA001'} (string list) printer.description = 'Dell Photo Printer 720' (string) printer.product = 'Photo Printer 720' (string) printer.serial = '53FSL61' (string) printer.vendor = 'Dell' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 7 (0x7) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.4/1-6.4.4/1-6.4.4:1.0' (string) usb.max_power = 4 (0x4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'Dell Photo Printer 720' (string) usb.product_id = 20488 (0x5008) (int) usb.serial = '53FSL61' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Dell Computer Corp.' (string) usb.vendor_id = 16700 (0x413c) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_5008_53FSL61_if0_printer_noserial' access_control.file = '/dev/usb/lp0' (string) access_control.type = 'printer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'printer', 'access_control'} (string list) info.category = 'printer' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_5008_53FSL61_if0' (string) info.product = 'Photo Printer 720' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_5008_53FSL61_if0_printer_noserial' (string) info.vendor = 'Dell ' (string) linux.device_file = '/dev/usb/lp0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.4/1-6.4.4/1-6.4.4:1.0/usb/lp0' (string) printer.commandset = {'CPDNPA001'} (string list) printer.description = 'Dell Photo Printer 720' (string) printer.device = '/dev/usb/lp0' (string) printer.originating_device = '/org/freedesktop/Hal/devices/usb_device_413c_5008_53FSL61_if0' (string) printer.product = 'Photo Printer 720' (string) printer.vendor = 'Dell ' (string) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) info.product = 'M-UV69a/HP M-UV96 Optical Wheel Mouse' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' (string) info.vendor = 'Logitech, Inc.' (string) linux.device_file = '/dev/bus/usb/001/005' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 832 (0x340) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 5 (0x5) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'M-UV69a/HP M-UV96 Optical Wheel Mouse' (string) usb_device.product_id = 49174 (0xc016) (int) usb_device.speed = 1.5 (1.5) (double) usb_device.vendor = 'Logitech, Inc.' (string) usb_device.vendor_id = 1133 (0x46d) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 832 (0x340) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 5 (0x5) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 49174 (0xc016) (int) usb.speed = 1.5 (1.5) (double) usb.vendor = 'Logitech, Inc.' (string) usb.vendor_id = 1133 (0x46d) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0_logicaldev_input' access_control.file = '/dev/input/event6' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' (string) info.product = 'Logitech Optical USB Mouse' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event6' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' (string) input.product = 'Logitech Optical USB Mouse' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.0/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) info.product = 'USB DSP v4 Audio Interface' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A' (string) info.vendor = 'Plantronics, Inc.' (string) linux.device_file = '/dev/bus/usb/001/004' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 4 (0x4) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 4 (0x4) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 4 (0x4) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'USB DSP v4 Audio Interface' (string) usb_device.product_id = 3233 (0xca1) (int) usb_device.serial = '00500-0429034410003-V060000A' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Plantronics, Inc.' (string) usb_device.vendor_id = 1151 (0x47f) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if3' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.3' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 4 (0x4) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 3 (0x3) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 4 (0x4) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.3' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 3233 (0xca1) (int) usb.serial = '00500-0429034410003-V060000A' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Plantronics, Inc.' (string) usb.vendor_id = 1151 (0x47f) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if3_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if3' (string) info.product = 'Plantronics Plantronics Headset' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if3_logicaldev_input' (string) input.device = '/dev/input/event5' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if3' (string) input.product = 'Plantronics Plantronics Headset' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'evdev' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.3/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if2' info.linux.driver = 'snd-usb-audio' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A' (string) info.product = 'USB Audio Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.2' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 4 (0x4) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 1 (0x1) (int) usb.interface.number = 2 (0x2) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 2 (0x2) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 4 (0x4) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.2' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Audio Interface' (string) usb.product_id = 3233 (0xca1) (int) usb.serial = '00500-0429034410003-V060000A' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Plantronics, Inc.' (string) usb.vendor_id = 1151 (0x47f) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if1' info.linux.driver = 'snd-usb-audio' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A' (string) info.product = 'USB Audio Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.1' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 4 (0x4) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 1 (0x1) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 2 (0x2) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 4 (0x4) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Audio Interface' (string) usb.product_id = 3233 (0xca1) (int) usb.serial = '00500-0429034410003-V060000A' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Plantronics, Inc.' (string) usb.vendor_id = 1151 (0x47f) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0' info.linux.driver = 'snd-usb-audio' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A' (string) info.product = 'USB Audio Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 4 (0x4) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 1 (0x1) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 4 (0x4) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Audio Interface' (string) usb.product_id = 3233 (0xca1) (int) usb.serial = '00500-0429034410003-V060000A' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Plantronics, Inc.' (string) usb.vendor_id = 1151 (0x47f) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0' (string) info.product = 'Plantronics Plantronics Headset Sound Card' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/sound/card1' (string) sound.card = 1 (0x1) (int) sound.card_id = 'Plantronics Plantronics Headset' (string) sound.originating_device = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC1D0p' (string) access_control.type = 'sound' (string) alsa.card = 1 (0x1) (int) alsa.card_id = 'Plantronics Plantronics Headset' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC1D0p' (string) alsa.device_id = 'USB Audio' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) info.product = 'USB Audio ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC1D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/sound/card1/pcmC1D0p' (string) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC1D0c' (string) access_control.type = 'sound' (string) alsa.card = 1 (0x1) (int) alsa.card_id = 'Plantronics Plantronics Headset' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC1D0c' (string) alsa.device_id = 'USB Audio' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) info.product = 'USB Audio ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC1D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/sound/card1/pcmC1D0c' (string) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer1' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) info.product = 'USB Audio OSS Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/sound/card1/mixer1' (string) oss.card = 1 (0x1) (int) oss.card_id = 'Plantronics Plantronics Headset' (string) oss.device_file = '/dev/mixer1' (string) oss.device_id = 'USB Audio' (string) oss.originating_device = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp1' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) info.product = 'USB Audio OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/sound/card1/dsp1' (string) oss.card = 1 (0x1) (int) oss.card_id = 'Plantronics Plantronics Headset' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp1' (string) oss.device_id = 'USB Audio' (string) oss.originating_device = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC1' (string) access_control.type = 'sound' (string) alsa.card = 1 (0x1) (int) alsa.card_id = 'Plantronics Plantronics Headset' (string) alsa.device_file = '/dev/snd/controlC1' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) info.product = 'Plantronics Plantronics Headset ALSA Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/sound/card1/controlC1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio1' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) info.product = 'USB Audio OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/sound/card1/audio1' (string) oss.card = 1 (0x1) (int) oss.card_id = 'Plantronics Plantronics Headset' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio1' (string) oss.device_id = 'USB Audio' (string) oss.originating_device = '/org/freedesktop/Hal/devices/usb_device_47f_ca1_00500_0429034410003_V060000A_if0_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 8 (0x8) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:1d.7' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_265b' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_265b' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4' (string) pci.product_id = 9819 (0x265b) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_265b' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/005/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.3' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.3' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_265a' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_265a' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3' (string) pci.product_id = 9818 (0x265a) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_265a' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/004/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.2' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.2' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2659' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2659' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2' (string) pci.product_id = 9817 (0x2659) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2659' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.product = 'Wireless 350 Bluetooth' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial' (string) info.vendor = 'Dell Computer Corp.' (string) linux.device_file = '/dev/bus/usb/003/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.device_class = 224 (0xe0) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 5719 (0x1657) (int) usb_device.device_subclass = 1 (0x1) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Wireless 350 Bluetooth' (string) usb_device.product_id = 33027 (0x8103) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Dell Computer Corp.' (string) usb_device.vendor_id = 16700 (0x413c) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if2' info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial' (string) info.product = 'USB Application Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 5719 (0x1657) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 254 (0xfe) (int) usb.interface.number = 2 (0x2) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string) usb.num_configurations = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Application Specific Interface' (string) usb.product_id = 33027 (0x8103) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Dell Computer Corp.' (string) usb.vendor_id = 16700 (0x413c) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if1' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 5719 (0x1657) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string) usb.num_configurations = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 33027 (0x8103) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Dell Computer Corp.' (string) usb.vendor_id = 16700 (0x413c) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if0' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 5719 (0x1657) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string) usb.num_configurations = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 33027 (0x8103) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Dell Computer Corp.' (string) usb.vendor_id = 16700 (0x413c) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if0_bluetooth_hci_10c67df6c7' bluetooth_hci.address = 72049620679 (0x10c67df6c7) (uint64) bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if0' (string) info.capabilities = {'bluetooth_hci'} (string list) info.category = 'bluetooth_hci' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if0' (string) info.product = 'Bluetooth Host Controller Interface' (string) info.subsystem = 'bluetooth' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8103_noserial_if0_bluetooth_hci_10c67df6c7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'bluetooth' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/bluetooth/hci0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2658' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2658' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1' (string) pci.product_id = 9816 (0x2658) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2658' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2591' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 915GM/PM Express PCI Express Root Port' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2591' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.product = 'Mobile 915GM/PM Express PCI Express Root Port' (string) pci.product_id = 9617 (0x2591) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_5460' info.parent = '/org/freedesktop/Hal/devices/pci_8086_2591' (string) info.product = 'M22 [Mobility Radeon X300]' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_5460' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string) pci.product = 'M22 [Mobility Radeon X300]' (string) pci.product_id = 21600 (0x5460) (int) pci.subsys_product_id = 8195 (0x2003) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_5460_drm_r300_card0' access_control.file = '/dev/dri/card0' (string) access_control.type = 'video' (string) drm.dri_library = 'r300' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'drm', 'access_control'} (string list) info.category = 'drm' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_5460' (string) info.product = 'Direct Rendering Manager Device' (string) info.subsystem = 'drm' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_5460_drm_r300_card0' (string) info.vendor = 'ATI Technologies Inc' (string) linux.device_file = '/dev/dri/card0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'drm' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2590' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2590' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = 'Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller' (string) pci.product_id = 9616 (0x2590) (int) pci.subsys_product_id = 392 (0x188) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/fuse' access_control.file = '/dev/fuse' (string) access_control.type = 'camera' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'access_control'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2590' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/fuse' (string) Dumped 129 device(s) from the Global Device List. ------------------------------------------------