[ 38.938717] sky2 eth0: enabling interface [ 38.939780] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.940649] iwlagn 0000:04:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 39.176255] Registered led device: iwl-phy0:radio [ 39.176299] Registered led device: iwl-phy0:assoc [ 39.176340] Registered led device: iwl-phy0:RX [ 39.176379] Registered led device: iwl-phy0:TX [ 39.219074] ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 40.169046] wlan2: authenticate with AP 00:1c:10:aa:bb:14 [ 40.170938] wlan2: authenticated [ 40.170942] wlan2: associate with AP 00:1c:10:aa:bb:14 [ 40.173133] wlan2: RX AssocResp from 00:1c:10:aa:bb:14 (capab=0x401 status=0 aid=3) [ 40.173137] wlan2: associated [ 40.194197] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 40.194271] wlan2: disassociating by local choice (reason=3) [ 50.913021] wlan2: no IPv6 routers present [ 161.105070] usb 4-2: USB disconnect, address 3 [ 162.592088] usb 4-1: USB disconnect, address 2 [ 162.604518] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 162.604554] option 4-1:1.0: device disconnected [ 162.605471] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 162.605506] option 4-1:1.1: device disconnected [ 171.080055] usb 4-1: new low speed USB device using uhci_hcd and address 4 [ 171.772509] usb 4-1: configuration #1 chosen from 1 choice [ 172.004544] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input10 [ 172.032189] generic-usb 0003:062A:0001.0002: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1a.1-1/input0 [ 174.744079] usb 4-1: USB disconnect, address 4 [ 182.848053] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 183.003543] usb 5-1: configuration #1 chosen from 1 choice [ 183.019573] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input11 [ 183.046794] generic-usb 0003:062A:0001.0003: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.0-1/input0 [ 205.836044] usb 4-1: new full speed USB device using uhci_hcd and address 5 [ 206.808558] usb 4-1: configuration #1 chosen from 1 choice [ 206.984115] usb-storage: probe of 4-1:1.0 failed with error -1 [ 206.984431] usb 4-1: USB disconnect, address 5 [ 207.720040] usb 4-1: new full speed USB device using uhci_hcd and address 6 [ 208.608251] usb 4-1: configuration #1 chosen from 1 choice [ 208.708640] usb-storage: probe of 4-1:1.0 failed with error -5 [ 208.708657] option 4-1:1.0: GSM modem (1-port) converter detected [ 208.709073] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 208.810713] usb-storage: probe of 4-1:1.1 failed with error -5 [ 208.810729] option 4-1:1.1: GSM modem (1-port) converter detected [ 208.810838] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 209.008107] usb-storage: probe of 4-1:1.2 failed with error -1 [ 231.632213] wlan2: direct probe to AP 00:1c:10:aa:bb:14 try 1 [ 231.720997] iwlagn: MAC is in deep sleep! [ 259.808097] usb 4-1: USB disconnect, address 6 [ 259.822099] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 259.822135] option 4-1:1.0: device disconnected [ 259.822440] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 259.822474] option 4-1:1.1: device disconnected [ 278.972044] usb 4-2: new full speed USB device using uhci_hcd and address 7 [ 279.896236] usb 4-2: configuration #1 chosen from 1 choice [ 280.016166] usb-storage: probe of 4-2:1.0 failed with error -1 [ 280.264078] usb 4-2: USB disconnect, address 7 [ 280.505029] usb 4-2: new full speed USB device using uhci_hcd and address 8 [ 281.384182] usb 4-2: configuration #1 chosen from 1 choice [ 281.416536] usb-storage: probe of 4-2:1.0 failed with error -5 [ 281.416552] option 4-2:1.0: GSM modem (1-port) converter detected [ 281.416699] usb 4-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 281.618436] usb-storage: probe of 4-2:1.1 failed with error -5 [ 281.618451] option 4-2:1.1: GSM modem (1-port) converter detected [ 281.618565] usb 4-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 281.816161] usb-storage: probe of 4-2:1.2 failed with error -1 [ 311.144084] usb 5-1: USB disconnect, address 2 [ 311.888073] usb 4-2: USB disconnect, address 8 [ 311.920666] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 311.920702] option 4-2:1.0: device disconnected [ 311.921038] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 311.921091] option 4-2:1.1: device disconnected [ 330.036063] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 330.198249] usb 5-1: configuration #1 chosen from 1 choice [ 330.215116] usb-storage: probe of 5-1:1.0 failed with error -1 [ 330.244050] usb 5-1: USB disconnect, address 3 [ 331.032046] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 331.195246] usb 5-1: configuration #1 chosen from 1 choice [ 331.207560] usb-storage: probe of 5-1:1.0 failed with error -5 [ 331.207581] option 5-1:1.0: GSM modem (1-port) converter detected [ 331.207740] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 331.214988] usb-storage: probe of 5-1:1.1 failed with error -5 [ 331.215014] option 5-1:1.1: GSM modem (1-port) converter detected [ 331.215110] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 331.219091] usb-storage: probe of 5-1:1.2 failed with error -1 [ 339.360037] usb 4-2: new low speed USB device using uhci_hcd and address 9 [ 339.929064] usb 4-2: configuration #1 chosen from 1 choice [ 340.160510] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input12 [ 340.188871] generic-usb 0003:062A:0001.0004: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1a.1-2/input0 [ 378.432780] PPP BSD Compression module registered [ 378.453810] PPP Deflate Compression module registered