=================================== dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-23-server (buildd@crested) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 22:14:30 UTC 2009 (Ubuntu 2.6.24-23.52-server) [ 0.000000] Command line: root=UUID=62ddfcd9-cbdc-4af6-94f1-d91072823009 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffb0000 (usable) [ 0.000000] BIOS-e820: 000000006ffb0000 - 000000006ffbe000 (ACPI data) [ 0.000000] BIOS-e820: 000000006ffbe000 - 000000006fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fff0000 - 000000006fffe000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458672) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F9CF0 checksum 0 [ 0.000000] ACPI: RSDP 000F9CF0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 6FFB0000, 0044 (r1 PacBel PBDT000E 20070828 MSFT 97) [ 0.000000] ACPI: FACP 6FFB0200, 0084 (r2 082807 FACP1051 20070828 MSFT 97) [ 0.000000] ACPI: DSDT 6FFB05C0, 5ADE (r1 1AAAA 1AAAA000 0 INTL 20051117) [ 0.000000] ACPI: FACS 6FFBE000, 0040 [ 0.000000] ACPI: APIC 6FFB0390, 0070 (r1 082807 APIC1051 20070828 MSFT 97) [ 0.000000] ACPI: MCFG 6FFB0400, 003C (r1 082807 OEMMCFG 20070828 MSFT 97) [ 0.000000] ACPI: SLIC 6FFB0440, 0176 (r1 PacBel PBDT000E 20070828 MSFT 97) [ 0.000000] ACPI: OEMB 6FFBE040, 0071 (r1 082807 OEMB1051 20070828 MSFT 97) [ 0.000000] ACPI: HPET 6FFB60A0, 0038 (r1 082807 OEMHPET0 20070828 MSFT 97) [ 0.000000] ACPI: NVHD 6FFBE0C0, 0554 (r1 082807 NVHDCP 20070828 MSFT 97) [ 0.000000] ACPI: SSDT 6FFB60E0, 01C4 (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000006ffb0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458672) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000006ffb0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 458672 [ 0.000000] On node 0 totalpages: 458575 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1323 pages reserved [ 0.000000] DMA zone: 2620 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6214 pages used for memmap [ 0.000000] DMA32 zone: 448362 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 6fffe000:8ec02000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 41952 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 450982 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=62ddfcd9-cbdc-4af6-94f1-d91072823009 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 115.039536] Marking TSC unstable due to TSCs unsynchronized [ 115.039538] time.c: Detected 1895.358 MHz processor. [ 115.042707] Console: colour VGA+ 80x25 [ 115.042710] console [tty0] enabled [ 115.042727] Checking aperture... [ 115.042729] CPU 0: aperture @ e014000000 size 32 MB [ 115.042731] Aperture too small (32 MB) [ 115.048846] No AGP bridge found [ 115.064542] Memory: 1795848k/1834688k available (2526k kernel code, 38452k reserved, 1329k data, 328k init) [ 115.064580] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 115.209437] Calibrating delay using timer specific routine.. 3793.73 BogoMIPS (lpj=18968657) [ 115.209468] Security Framework initialized [ 115.209474] SELinux: Disabled at boot. [ 115.209488] AppArmor: AppArmor initialized [ 115.209492] Failure registering capabilities with primary security module. [ 115.209655] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 115.210830] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 115.211390] Mount-cache hash table entries: 256 [ 115.211519] Initializing cgroup subsys ns [ 115.211523] Initializing cgroup subsys cpuacct [ 115.211536] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 115.211538] CPU: L2 Cache: 512K (64 bytes/line) [ 115.211541] CPU 0/0 -> Node 0 [ 115.211543] CPU: Physical Processor ID: 0 [ 115.211544] CPU: Processor Core ID: 0 [ 115.211566] SMP alternatives: switching to UP code [ 115.212157] Early unpacking initramfs... done [ 115.549243] ACPI: Core revision 20070126 [ 115.549312] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 115.652979] Using local APIC timer interrupts. [ 115.705718] APIC timer calibration result 12469464 [ 115.705720] Detected 12.469 MHz APIC timer. [ 115.705822] SMP alternatives: switching to SMP code [ 115.706326] Booting processor 1/2 APIC 0x1 [ 115.721037] Initializing CPU#1 [ 115.870268] Calibrating delay using timer specific routine.. 3790.74 BogoMIPS (lpj=18953732) [ 115.870274] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 115.870276] CPU: L2 Cache: 512K (64 bytes/line) [ 115.870279] CPU 1/1 -> Node 0 [ 115.870280] CPU: Physical Processor ID: 0 [ 115.870282] CPU: Processor Core ID: 1 [ 115.870384] AMD Athlon(tm) X2 Dual Core Processor BE-2300 stepping 02 [ 115.865797] Brought up 2 CPUs [ 115.865907] CPU0 attaching sched-domain: [ 115.865909] domain 0: span 00000000,00000003 [ 115.865911] groups: 00000000,00000001 00000000,00000002 [ 115.865916] domain 1: span 00000000,00000003 [ 115.865917] groups: 00000000,00000003 [ 115.865920] CPU1 attaching sched-domain: [ 115.865922] domain 0: span 00000000,00000003 [ 115.865924] groups: 00000000,00000002 00000000,00000001 [ 115.865927] domain 1: span 00000000,00000003 [ 115.865929] groups: 00000000,00000003 [ 115.866234] net_namespace: 120 bytes [ 115.866688] Time: 2:36:54 Date: 04/27/09 [ 115.866734] NET: Registered protocol family 16 [ 115.866935] ACPI: bus type pci registered [ 115.867011] PCI: Using configuration type 1 [ 115.872064] ACPI: EC: Look up EC in DSDT [ 115.880403] ACPI: Interpreter enabled [ 115.880405] ACPI: (supports S0 S1 S3 S4 S5) [ 115.880423] ACPI: Using IOAPIC for interrupt routing [ 115.880687] Error attaching device data [ 115.880693] Error attaching device data [ 115.893640] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 115.894309] PCI: Transparent bridge - 0000:00:08.0 [ 115.894723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 115.895044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 115.895177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 115.895278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 115.895378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 115.895483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 115.895583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 115.895737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] [ 115.895838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR16._PRT] [ 115.912042] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 115.912282] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 115.912520] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 115.912757] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 115.912994] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 115.913232] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 115.913472] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 115.913710] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 115.913954] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7 [ 115.914194] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 115.914433] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 115.914674] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7 [ 115.914922] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10 [ 115.915161] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 115.915398] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 115.915678] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 115.915956] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 115.916196] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11 [ 115.916435] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *7 [ 115.916629] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 95, should be 8A [20070126] [ 115.916641] Linux Plug and Play Support v0.97 (c) Adam Belay [ 115.916671] pnp: PnP ACPI init [ 115.916680] ACPI: bus type pnp registered [ 115.924438] pnp: PnP ACPI: found 15 devices [ 115.924440] ACPI: ACPI bus type pnp unregistered [ 115.924681] PCI: Using ACPI for IRQ routing [ 115.924684] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 115.955651] NET: Registered protocol family 8 [ 115.955653] NET: Registered protocol family 20 [ 115.955682] NetLabel: Initializing [ 115.955684] NetLabel: domain hash size = 128 [ 115.955685] NetLabel: protocols = UNLABELED CIPSOv4 [ 115.955700] NetLabel: unlabeled traffic allowed by default [ 115.955759] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 115.955763] hpet0: 3 32-bit timers, 25000000 Hz [ 115.956810] AppArmor: AppArmor Filesystem Enabled [ 115.965599] Time: hpet clocksource has been installed. [ 115.965611] Switched to high resolution mode on CPU 0 [ 115.970376] Switched to high resolution mode on CPU 1 [ 115.985629] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 115.985632] system 00:07: ioport range 0x800-0x80f has been reserved [ 115.985635] system 00:07: ioport range 0x2000-0x207f has been reserved [ 115.985637] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 115.985640] system 00:07: ioport range 0x2400-0x247f has been reserved [ 115.985642] system 00:07: ioport range 0x2480-0x24ff has been reserved [ 115.985645] system 00:07: ioport range 0x2800-0x287f has been reserved [ 115.985647] system 00:07: ioport range 0x2880-0x28ff has been reserved [ 115.985650] system 00:07: ioport range 0x2c00-0x2c7f has been reserved [ 115.985652] system 00:07: ioport range 0x2c80-0x2cff has been reserved [ 115.985656] system 00:07: iomem range 0x0-0x0 could not be reserved [ 115.985659] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 115.985661] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 115.985664] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved [ 115.985671] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 115.985674] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [ 115.985680] system 00:0c: ioport range 0xa00-0xa0f has been reserved [ 115.985682] system 00:0c: ioport range 0xa10-0xa1f has been reserved [ 115.985685] system 00:0c: ioport range 0xa20-0xa2f has been reserved [ 115.985687] system 00:0c: ioport range 0xa30-0xa3f has been reserved [ 115.985695] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 115.985701] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 115.985704] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 115.985706] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 115.985709] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved [ 115.985711] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved [ 115.986112] PCI: Bridge: 0000:00:08.0 [ 115.986114] IO window: disabled. [ 115.986117] MEM window: disabled. [ 115.986119] PREFETCH window: disabled. [ 115.986121] PCI: Bridge: 0000:00:0b.0 [ 115.986122] IO window: disabled. [ 115.986125] MEM window: disabled. [ 115.986126] PREFETCH window: disabled. [ 115.986128] PCI: Bridge: 0000:00:0c.0 [ 115.986129] IO window: disabled. [ 115.986131] MEM window: disabled. [ 115.986133] PREFETCH window: disabled. [ 115.986135] PCI: Bridge: 0000:00:0d.0 [ 115.986136] IO window: disabled. [ 115.986138] MEM window: disabled. [ 115.986140] PREFETCH window: disabled. [ 115.986142] PCI: Bridge: 0000:00:0e.0 [ 115.986143] IO window: disabled. [ 115.986145] MEM window: disabled. [ 115.986146] PREFETCH window: disabled. [ 115.986149] PCI: Bridge: 0000:00:0f.0 [ 115.986150] IO window: disabled. [ 115.986151] MEM window: disabled. [ 115.986153] PREFETCH window: disabled. [ 115.986155] PCI: Bridge: 0000:00:10.0 [ 115.986156] IO window: disabled. [ 115.986158] MEM window: disabled. [ 115.986160] PREFETCH window: disabled. [ 115.986162] PCI: Bridge: 0000:00:11.0 [ 115.986163] IO window: disabled. [ 115.986165] MEM window: disabled. [ 115.986166] PREFETCH window: disabled. [ 115.986176] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 115.986185] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 115.986191] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 115.986197] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 115.986203] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 115.986209] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 115.986215] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 115.986221] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 115.986297] NET: Registered protocol family 2 [ 116.075782] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 116.076625] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 116.078764] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 116.079341] TCP: Hash tables configured (established 262144 bind 65536) [ 116.079344] TCP reno registered [ 116.105679] checking if image is initramfs... it is [ 116.758789] Freeing initrd memory: 7849k freed [ 116.764191] audit: initializing netlink socket (disabled) [ 116.764203] audit(1240799814.680:1): initialized [ 116.764416] Total HugeTLB memory allocated, 0 [ 116.766461] VFS: Disk quotas dquot_6.5.1 [ 116.766554] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 116.766746] io scheduler noop registered [ 116.766748] io scheduler anticipatory registered [ 116.766750] io scheduler deadline registered (default) [ 116.766855] io scheduler cfq registered [ 116.766884] pci 0000:00:00.0: Enabling HT MSI Mapping [ 116.815696] pci 0000:00:07.0: Enabling HT MSI Mapping [ 116.815713] pci 0000:00:08.0: Enabling HT MSI Mapping [ 116.815738] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 116.815751] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 116.815764] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 116.815778] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 116.815791] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 116.815805] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 116.815818] pci 0000:00:10.0: Enabling HT MSI Mapping [ 116.815831] pci 0000:00:11.0: Enabling HT MSI Mapping [ 116.815844] Boot video device is 0000:00:12.0 [ 116.816005] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 116.816033] assign_interrupt_mode Found MSI capability [ 116.816052] Allocate Port Service[0000:00:0b.0:pcie00] [ 116.816115] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 116.816135] assign_interrupt_mode Found MSI capability [ 116.816150] Allocate Port Service[0000:00:0c.0:pcie00] [ 116.816206] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 116.816226] assign_interrupt_mode Found MSI capability [ 116.816241] Allocate Port Service[0000:00:0d.0:pcie00] [ 116.816300] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 116.816321] assign_interrupt_mode Found MSI capability [ 116.816335] Allocate Port Service[0000:00:0e.0:pcie00] [ 116.816392] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 116.816412] assign_interrupt_mode Found MSI capability [ 116.816427] Allocate Port Service[0000:00:0f.0:pcie00] [ 116.816482] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 116.816502] assign_interrupt_mode Found MSI capability [ 116.816517] Allocate Port Service[0000:00:10.0:pcie00] [ 116.816576] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 116.816596] assign_interrupt_mode Found MSI capability [ 116.816611] Allocate Port Service[0000:00:11.0:pcie00] [ 116.845972] Real Time Clock Driver v1.12ac [ 116.846177] hpet_resources: 0xfed00000 is busy [ 116.846217] Linux agpgart interface v0.102 [ 116.846219] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 116.846357] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 116.846493] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 116.846959] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 116.847211] 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 116.847953] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 116.848021] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 116.848108] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 116.848111] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 116.848218] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 116.885301] mice: PS/2 mouse device common for all mice [ 116.885341] cpuidle: using governor ladder [ 116.885343] cpuidle: using governor menu [ 116.885495] NET: Registered protocol family 1 [ 116.885595] registered taskstats version 1 [ 116.885736] Magic number: 5:805:612 [ 116.885787] hash matches device ptye2 [ 116.885837] hash matches device tty [ 116.885864] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 116.885867] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 116.886130] Freeing unused kernel memory: 328k freed [ 116.886606] Write protecting the kernel read-only data: 1044k [ 116.980163] fuse init (API version 7.9) [ 116.999121] ACPI: Thermal Zone [THRM] (30 C) [ 117.007407] md: linear personality registered for level -1 [ 117.015937] md: multipath personality registered for level -4 [ 117.019666] md: raid0 personality registered for level 0 [ 117.024286] md: raid1 personality registered for level 1 [ 117.023274] xor: automatically using best checksumming function: generic_sse [ 117.065046] generic_sse: 5842.400 MB/sec [ 117.065048] xor: using function: generic_sse (5842.400 MB/sec) [ 117.065738] async_tx: api initialized (async) [ 117.234986] raid6: int64x1 1832 MB/s [ 117.404875] raid6: int64x2 2320 MB/s [ 117.574792] raid6: int64x4 2379 MB/s [ 117.744719] raid6: int64x8 1877 MB/s [ 117.914638] raid6: sse2x1 2616 MB/s [ 118.084535] raid6: sse2x2 3522 MB/s [ 118.254451] raid6: sse2x4 3678 MB/s [ 118.254453] raid6: using algorithm sse2x4 (3678 MB/s) [ 118.254456] md: raid6 personality registered for level 6 [ 118.254458] md: raid5 personality registered for level 5 [ 118.254460] md: raid4 personality registered for level 4 [ 118.275242] md: raid10 personality registered for level 10 [ 118.563612] usbcore: registered new interface driver usbfs [ 118.563635] usbcore: registered new interface driver hub [ 118.563661] usbcore: registered new device driver usb [ 118.575564] SCSI subsystem initialized [ 118.578172] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 118.578637] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 118.578647] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 118.578829] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 118.578836] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 118.579089] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 118.579109] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfebff000 [ 118.602170] libata version 3.00 loaded. [ 118.636410] usb usb1: configuration #1 chosen from 1 choice [ 118.636436] hub 1-0:1.0: USB hub found [ 118.636448] hub 1-0:1.0: 6 ports detected [ 118.688993] Floppy drive(s): fd0 is 1.44M [ 118.712851] FDC 0 is a post-1991 82077 [ 118.744733] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22 [ 118.744744] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [UB11] -> GSI 22 (level, low) -> IRQ 22 [ 118.744930] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 118.744937] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 118.744991] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 118.745012] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfebfd000 [ 118.806605] usb usb2: configuration #1 chosen from 1 choice [ 118.806631] hub 2-0:1.0: USB hub found [ 118.806639] hub 2-0:1.0: 6 ports detected [ 118.914848] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 [ 118.914860] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 21 (level, low) -> IRQ 21 [ 118.915040] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 118.915047] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 118.915101] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 118.915130] ehci_hcd 0000:00:02.1: debug port 1 [ 118.915134] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 118.915145] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfebfec00 [ 118.934153] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 118.934271] usb usb3: configuration #1 chosen from 1 choice [ 118.934294] hub 3-0:1.0: USB hub found [ 118.934301] hub 3-0:1.0: 6 ports detected [ 119.044594] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20 [ 119.044606] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [UB12] -> GSI 20 (level, low) -> IRQ 20 [ 119.044783] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 119.044789] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 119.044851] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 119.044882] ehci_hcd 0000:00:04.1: debug port 1 [ 119.044885] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 119.044897] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfebfe800 [ 119.064070] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 119.064189] usb usb4: configuration #1 chosen from 1 choice [ 119.064213] hub 4-0:1.0: USB hub found [ 119.064219] hub 4-0:1.0: 6 ports detected [ 119.174296] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 119.174736] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 119.174739] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 119.174745] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 119.704169] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:1e:90:01:8f:b1 [ 119.704174] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 119.704357] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 119.704764] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 119.704768] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 119.704791] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 119.704798] ACPI: PCI interrupt for device 0000:00:09.0 disabled [ 119.707379] ahci 0000:00:09.0: version 3.0 [ 119.707391] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 119.853635] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 120.084616] usb 2-1: configuration #1 chosen from 1 choice [ 120.090559] hub 2-1:1.0: USB hub found [ 120.093524] hub 2-1:1.0: 2 ports detected [ 120.449345] usb 2-1.1: new full speed USB device using ohci_hcd and address 3 [ 120.574370] usb 2-1.1: configuration #1 chosen from 1 choice [ 120.592740] usbcore: registered new interface driver hiddev [ 120.597470] input: BTC Multimedia USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1 [ 120.660400] input,hidraw0: USB HID v1.10 Keyboard [BTC Multimedia USB Keyboard] on usb-0000:00:04.0-1.1 [ 120.660411] usbcore: registered new interface driver usbhid [ 120.660413] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 120.713219] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 120.713224] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio [ 120.713229] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 120.714660] scsi0 : ahci [ 120.715313] scsi1 : ahci [ 120.715795] scsi2 : ahci [ 120.716292] scsi3 : ahci [ 120.716371] ata1: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6100 irq 22 [ 120.716374] ata2: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6180 irq 22 [ 120.716377] ata3: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6200 irq 22 [ 120.716379] ata4: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6280 irq 22 [ 121.402850] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 121.453011] ata1.00: ATA-7: ST3750640AS, 3.AAJ, max UDMA/133 [ 121.453015] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 121.519612] ata1.00: configured for UDMA/133 [ 122.202445] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 122.208321] ata2.00: ATA-6: ST3750330NS, SN04, max UDMA/133 [ 122.208323] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 122.209934] ata2.00: configured for UDMA/133 [ 122.892087] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 122.897966] ata3.00: ATA-6: ST3750330NS, SN04, max UDMA/133 [ 122.897969] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 122.899558] ata3.00: configured for UDMA/133 [ 123.581732] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 123.587595] ata4.00: ATA-6: ST3750330NS, SN04, max UDMA/133 [ 123.587598] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 123.589231] ata4.00: configured for UDMA/133 [ 123.584668] scsi 0:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5 [ 123.584772] scsi 1:0:0:0: Direct-Access ATA ST3750330NS SN04 PQ: 0 ANSI: 5 [ 123.584851] scsi 2:0:0:0: Direct-Access ATA ST3750330NS SN04 PQ: 0 ANSI: 5 [ 123.584930] scsi 3:0:0:0: Direct-Access ATA ST3750330NS SN04 PQ: 0 ANSI: 5 [ 123.588148] pata_amd 0000:00:06.0: version 0.3.10 [ 123.588196] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 123.594210] scsi4 : pata_amd [ 123.594869] scsi5 : pata_amd [ 123.596090] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 123.596093] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 123.957648] ata5.00: ATA-6: MDT MD2500JB-00EVA0, 15.05R15, max UDMA/100 [ 123.957651] ata5.00: 488397168 sectors, multi 16: LBA48 [ 123.957666] ata5.01: ATAPI: ASUS CD-S500/A, V3.4H, max UDMA/33 [ 123.997570] ata5.00: configured for UDMA/100 [ 124.196301] ata5.01: configured for UDMA/33 [ 124.191688] ata6: port disabled. ignoring. [ 124.191788] scsi 4:0:0:0: Direct-Access ATA MDT MD2500JB-00E 15.0 PQ: 0 ANSI: 5 [ 124.192421] scsi 4:0:1:0: CD-ROM ASUS CD-S500/A 3.4H PQ: 0 ANSI: 5 [ 124.205825] Driver 'sd' needs updating - please use bus_type methods [ 124.205920] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) [ 124.205932] sd 0:0:0:0: [sda] Write Protect is off [ 124.205935] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 124.205951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.206009] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) [ 124.206018] sd 0:0:0:0: [sda] Write Protect is off [ 124.206020] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 124.206035] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.206038] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 124.223932] unknown partition table [ 124.223978] sd 0:0:0:0: [sda] Attached SCSI disk [ 124.224032] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 124.224043] sd 1:0:0:0: [sdb] Write Protect is off [ 124.224046] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 124.224062] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.224102] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 124.224111] sd 1:0:0:0: [sdb] Write Protect is off [ 124.224113] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 124.224128] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.224132] sdb: [ 124.264659] sd 1:0:0:0: [sdb] Attached SCSI disk [ 124.264699] sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) [ 124.264709] sd 2:0:0:0: [sdc] Write Protect is off [ 124.264711] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 124.264726] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.264758] sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) [ 124.264767] sd 2:0:0:0: [sdc] Write Protect is off [ 124.264769] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 124.264784] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.264787] sdc: unknown partition table [ 124.272643] sd 2:0:0:0: [sdc] Attached SCSI disk [ 124.272682] sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB) [ 124.272692] sd 3:0:0:0: [sdd] Write Protect is off [ 124.272694] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 124.272709] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.272742] sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB) [ 124.272751] sd 3:0:0:0: [sdd] Write Protect is off [ 124.272753] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 124.272768] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.272771] sdd: unknown partition table [ 124.281287] sd 3:0:0:0: [sdd] Attached SCSI disk [ 124.281325] sd 4:0:0:0: [sde] 488397168 512-byte hardware sectors (250059 MB) [ 124.281334] sd 4:0:0:0: [sde] Write Protect is off [ 124.281336] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 124.281351] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.281382] sd 4:0:0:0: [sde] 488397168 512-byte hardware sectors (250059 MB) [ 124.281391] sd 4:0:0:0: [sde] Write Protect is off [ 124.281393] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 124.281408] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.281411] sde: sde1 sde2 < sde5 > [ 124.311559] sd 4:0:0:0: [sde] Attached SCSI disk [ 124.315255] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 124.315277] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 124.315296] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 124.315315] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 124.315333] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 124.315349] sr 4:0:1:0: Attached scsi generic sg5 type 5 [ 124.323042] sr0: scsi3-mmc drive: 50x/50x cd/rw xa/form2 cdda tray [ 124.323047] Uniform CD-ROM driver Revision: 3.20 [ 124.323099] sr 4:0:1:0: Attached scsi CD-ROM sr0 [ 124.464595] md: md0 stopped. [ 124.595692] md: bind [ 124.595778] md: bind [ 124.595856] md: bind [ 124.595959] md: bind [ 124.724973] device-mapper: uevent: version 1.0.3 [ 124.725004] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 124.977017] device-mapper: table: 253:0: raid45: unknown target type [ 124.977076] device-mapper: ioctl: error adding target to table [ 125.004580] Attempting manual resume [ 125.004584] swsusp: Resume From Partition 8:69 [ 125.004586] PM: Checking swsusp image. [ 125.004749] PM: Resume from disk failed. [ 125.019954] EXT3-fs: INFO: recovery required on readonly filesystem. [ 125.019958] EXT3-fs: write access will be enabled during recovery. [ 125.130416] kjournald starting. Commit interval 5 seconds [ 125.130430] EXT3-fs: recovery complete. [ 125.130851] EXT3-fs: mounted filesystem with ordered data mode. [ 126.918152] udevd version 124 started [ 128.033526] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 128.060627] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 128.174011] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 128.215768] input: Power Button (FF) as /devices/virtual/input/input3 [ 128.257605] device-mapper: dm-raid45: initialized v0.2427 [ 128.263509] device-mapper: table: 253:0: raid45: dm-raid45: RAID device lookup failure [ 128.263570] device-mapper: ioctl: error adding target to table [ 128.489345] ACPI: Power Button (FF) [PWRF] [ 128.489428] input: Power Button (CM) as /devices/virtual/input/input4 [ 128.591264] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 128.591269] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 128.591484] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 128.649255] ACPI: Power Button (CM) [PWRB] [ 128.669106] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 128.751250] ACPI: WMI-Acer: Mapper loaded [ 130.305695] device-mapper: table: 253:0: raid45: dm-raid45: RAID device lookup failure [ 130.305757] device-mapper: ioctl: error adding target to table [ 131.415956] loop: module loaded [ 131.460881] lp: driver loaded but no devices found [ 131.825402] Adding 5285344k swap on /dev/sde5. Priority:-1 extents:1 across:5285344k [ 132.207044] EXT3 FS on sde1, internal journal [ 133.071029] ip_tables: (C) 2000-2006 Netfilter Core Team [ 134.062573] NET: Registered protocol family 10 [ 134.062797] lo: Disabled Privacy Extensions [ 140.451065] NET: Registered protocol family 5 [ 144.515759] eth0: no IPv6 routers present