| 2009-04-27 18:39:53 |
yomlogs |
description |
My Nebula DigiTV PCI card does not work following an upgrade from 8.10 to 9.04. It worked fine under 8.10.
When running xine dvb://, the application freezes and the following appears in /var/log/messages:
kernel: [ 4265.603605] DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver
kernel: [ 4265.604009] DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver
Edited output of sudo lspci -v:
05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Nebula Electronics Ltd. Device 0101
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at eb100000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel driver in use: bttv
Kernel modules: bttv
05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Nebula Electronics Ltd. Device 0101
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at eb101000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel driver in use: bt878
Kernel modules: bt878
Upon bootup I get this in /var/log/messages:
kernel: [ 8.679054] Linux video capture interface: v2.00
kernel: [ 8.736826] bttv: driver version 0.9.17 loaded
kernel: [ 8.736828] bttv: using 8 buffers with 2080k (520 pages) each for capture
kernel: [ 8.736878] bttv: Bt8xx card found (0).
kernel: [ 8.736890] bttv 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
kernel: [ 8.736898] bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 18, latency: 32, mmio: 0xeb100000
kernel: [ 8.736925] bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem ID is 0071:0101
kernel: [ 8.736927] bttv0: using: Nebula Electronics DigiTV [card=104,autodetected]
kernel: [ 8.736984] bttv0: tuner absent
kernel: [ 8.737021] bttv0: registered device video0
kernel: [ 8.737049] bttv0: registered device vbi0
kernel: [ 8.737067] bttv0: PLL: 28636363 => 35468950 .. ok
kernel: [ 8.768530] bttv0: add subdevice "dvb0"
kernel: [ 8.768629] input: bttv IR (card=104) as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/input/input7
kernel: [ 8.801090] bt878: AUDIO driver version 0.0.0 loaded
kernel: [ 8.801109] bt878: Bt878 AUDIO function found (0).
kernel: [ 8.801116] bt878 0000:05:02.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
kernel: [ 8.801118] bt878_probe: card id=[0x1010071],[ Nebula Electronics DigiTV ] has DVB functions.
kernel: [ 8.801123] bt878(0): Bt878 (rev 17) at 05:02.1, irq: 18, latency: 32, memory: 0xeb101000
kernel: [ 8.838883] DVB: registering new adapter (bttv0)
[.....]
kernel: [ 9.024334] DVB: registering adapter 0 frontend 0 (NxtWave NXT6000 DVB-T)... |
My Nebula DigiTV PCI card does not work following an upgrade from 8.10 to 9.04. It worked fine under 8.10.
When running xine dvb://, the application freezes and the following appears in /var/log/messages:
kernel: [ 4265.603605] DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver
kernel: [ 4265.604009] DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver
Edited output of sudo lspci -v:
05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Nebula Electronics Ltd. Device 0101
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at eb100000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel driver in use: bttv
Kernel modules: bttv
05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Nebula Electronics Ltd. Device 0101
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at eb101000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel driver in use: bt878
Kernel modules: bt878
Output of uname -a:
Linux dobber 2.6.27-11-generic #1 SMP Wed Apr 1 20:53:41 UTC 2009 x86_64 GNU/Linux
Upon bootup I get this in /var/log/messages:
kernel: [ 8.679054] Linux video capture interface: v2.00
kernel: [ 8.736826] bttv: driver version 0.9.17 loaded
kernel: [ 8.736828] bttv: using 8 buffers with 2080k (520 pages) each for capture
kernel: [ 8.736878] bttv: Bt8xx card found (0).
kernel: [ 8.736890] bttv 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
kernel: [ 8.736898] bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 18, latency: 32, mmio: 0xeb100000
kernel: [ 8.736925] bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem ID is 0071:0101
kernel: [ 8.736927] bttv0: using: Nebula Electronics DigiTV [card=104,autodetected]
kernel: [ 8.736984] bttv0: tuner absent
kernel: [ 8.737021] bttv0: registered device video0
kernel: [ 8.737049] bttv0: registered device vbi0
kernel: [ 8.737067] bttv0: PLL: 28636363 => 35468950 .. ok
kernel: [ 8.768530] bttv0: add subdevice "dvb0"
kernel: [ 8.768629] input: bttv IR (card=104) as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/input/input7
kernel: [ 8.801090] bt878: AUDIO driver version 0.0.0 loaded
kernel: [ 8.801109] bt878: Bt878 AUDIO function found (0).
kernel: [ 8.801116] bt878 0000:05:02.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
kernel: [ 8.801118] bt878_probe: card id=[0x1010071],[ Nebula Electronics DigiTV ] has DVB functions.
kernel: [ 8.801123] bt878(0): Bt878 (rev 17) at 05:02.1, irq: 18, latency: 32, memory: 0xeb101000
kernel: [ 8.838883] DVB: registering new adapter (bttv0)
[.....]
kernel: [ 9.024334] DVB: registering adapter 0 frontend 0 (NxtWave NXT6000 DVB-T)... |
|
