Bonding still broken for bnx2 in Jaunty
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Expired
|
Undecided
|
Unassigned |
Bug Description
My config is as follows (eth0 is onboard/bnx2)
My /etc/network/
=======
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto bond0
iface bond0 inet static
address 10.1.13.163
netmask 255.255.255.0
gateway 10.1.13.1
post-up ifenslave bond0 eth1 eth2
pre-down ifenslave -d bond0 eth1 eth2
=======
When eth1/eth2 are pro/1000 MT nics, everything works great
When eth1/eth2 are 2 bnx2 nics, I can't pass any traffic.
System Info:
=======
lsb_release -rd
Description: Ubuntu 9.04
Release: 9.04
=======
apt-cache policy linux
linux:
Installed: (none)
Candidate: 2.6.28.11.15
Version table:
2.6.28.11.15 0
500 http://
=======
I'm having the same issue with Intrepid and Jaunty.
I was having the issue with Intrepid, so I disabled bonding and upgraded to Jaunty with a using a single NIC, and now I have the same issue when attempting to bond.