v---
Waiting for suspend to complete 29 to go ...
Waiting for suspend to complete 28 to go ...
Waiting for suspend to complete 27 to go ...
> [ 5230.958416] CPU0 attaching NULL sched-domain.
> [ 5230.958435] CPU1 attaching NULL sched-domain.
> [ 5230.976171] CPU0 attaching sched-domain:
> [ 5230.976179]  domain 0: span 0-1 level CPU
> [ 5230.976185]   groups: 0 1
> [ 5230.976196] CPU1 attaching sched-domain:
> [ 5230.976201]  domain 0: span 0-1 level CPU
> [ 5230.976205]   groups: 1 0
Waiting for suspend to complete 26 to go ...
> [ 5231.564680] wlan0: disassociating by local choice (reason=3)
> [ 5231.590132] wlan0: direct probe to AP 00:22:a4:53:be:29 try 1
> [ 5231.592430] wlan0 direct probe responded
> [ 5231.592437] wlan0: authenticate with AP 00:22:a4:53:be:29
> [ 5231.594133] wlan0: authenticated
> [ 5231.594140] wlan0: associate with AP 00:22:a4:53:be:29
> [ 5231.596031] wlan0: RX AssocResp from 00:22:a4:53:be:29 (capab=0x431 status=0 aid=1)
> [ 5231.596037] wlan0: associated
> [ 5231.600489] wlan0: disassociating by local choice (reason=3)
> [ 5232.184368] [drm] Num pipes: 1
Waiting for suspend to complete 25 to go ...
Waiting for suspend to complete 24 to go ...
> [ 5233.832367] PM: Syncing filesystems ... done.
> [ 5233.842221] PM: Preparing system for mem sleep
> [ 5233.842225] Freezing user space processes ... (elapsed 0.00 seconds) done.
> [ 5233.843328] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> [ 5233.843404] PM: Entering mem sleep
> [ 5233.843426] Suspending console(s) (use no_console_suspend to debug)
> [ 5234.372661] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 5234.372738] sd 0:0:0:0: [sda] Stopping disk
> [ 5234.853044] ath5k_pci 0000:04:00.0: PCI INT A disabled
> [ 5234.868083] ACPI handle has no context!
> [ 5234.868087] ACPI handle has no context!
> [ 5234.900048] HDA Intel 0000:00:14.2: PCI INT A disabled
> [ 5234.916149] pata_atiixp 0000:00:14.1: PCI INT A disabled
> [ 5234.916226] ehci_hcd 0000:00:13.5: PCI INT D disabled
> [ 5234.932100] ehci_hcd 0000:00:13.5: power state changed by ACPI to D3
> [ 5234.932137] ohci_hcd 0000:00:13.4: PCI INT C disabled
> [ 5234.932169] ohci_hcd 0000:00:13.3: PCI INT B disabled
> [ 5234.932201] ohci_hcd 0000:00:13.2: PCI INT C disabled
> [ 5234.932233] ohci_hcd 0000:00:13.1: PCI INT B disabled
> [ 5234.932264] ohci_hcd 0000:00:13.0: PCI INT A disabled
> [ 5234.996151] ahci 0000:00:12.0: PCI INT A disabled
> [ 5234.996482] PM: suspend devices took 1.156 seconds
> [ 5235.007338] ACPI: Preparing to enter system sleep state S3
> [ 5235.012803] Disabling non-boot CPUs ...
> [ 5235.116031] CPU 1 is now offline
> [ 5235.116035] SMP alternatives: switching to UP code
> [ 5235.276341] CPU0 attaching NULL sched-domain.
> [ 5235.276345] CPU1 attaching NULL sched-domain.
> [ 5235.284466] CPU0 attaching NULL sched-domain.
> [ 5235.284748] CPU1 is down
> [ 5235.284748] Back to C!
> [ 5235.284748] ahci 0000:00:12.0: set SATA to AHCI mode
> [ 5235.284748] Enabling non-boot CPUs ...
> [ 5235.284748] SMP alternatives: switching to SMP code
> [ 5235.447230] Booting processor 1 APIC 0x1 ip 0x6000
> [ 5235.276144] Initializing CPU#1
> [ 5235.276144] Calibrating delay using timer specific routine.. 4000.09 BogoMIPS (lpj=8000193)
> [ 5235.276144] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 5235.276144] CPU: L2 Cache: 512K (64 bytes/line)
> [ 5235.276144] CPU: Physical Processor ID: 0
> [ 5235.276144] CPU: Processor Core ID: 1
> [ 5235.536178] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> [ 5235.536191] Switch to broadcast mode on CPU1
> [ 5235.536212] CPU0 attaching NULL sched-domain.
> [ 5235.540045] Switched to high resolution mode on CPU 1
> [ 5235.553265] CPU0 attaching sched-domain:
> [ 5235.553268]  domain 0: span 0-1 level CPU
> [ 5235.553270]   groups: 0 1
> [ 5235.553275] CPU1 attaching sched-domain:
> [ 5235.553277]  domain 0: span 0-1 level CPU
> [ 5235.553278]   groups: 1 0
> [ 5235.556030] CPU1 is up
> [ 5235.556032] ACPI: Waking up from system sleep state S3
> [ 5235.651523] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 5235.651720] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5235.651738] pcieport-driver 0000:00:04.0: setting latency timer to 64
> [ 5235.651753] pcieport-driver 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5235.651768] pcieport-driver 0000:00:05.0: setting latency timer to 64
> [ 5235.651781] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5235.651796] pcieport-driver 0000:00:06.0: setting latency timer to 64
> [ 5235.651827] ahci 0000:00:12.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300007)
> [ 5235.651843] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 5235.651918] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5235.672040] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5235.696039] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5235.720039] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5235.744039] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5235.774594] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
> [ 5235.788043] ehci_hcd 0000:00:13.5: enabling device (0000 -> 0002)
> [ 5235.788049] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 5235.788083] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00006, writing 0x2b00117)
> [ 5235.788155] pata_atiixp 0000:00:14.1: restoring config space at offset 0x1 (was 0x2200011, writing 0x2200015)
> [ 5235.788164] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5235.804060] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
> [ 5235.804072] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5235.804182] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5235.804216] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5235.804282] ath5k_pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
> [ 5235.820037] ath5k_pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5235.820141] sd 0:0:0:0: [sda] Starting disk
> [ 5235.968561] ata2: SATA link down (SStatus 0 SControl 300)
> [ 5235.968587] ata4: SATA link down (SStatus 0 SControl 300)
> [ 5235.969070] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> [ 5235.969072] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> [ 5235.972548] ata3: SATA link down (SStatus 0 SControl 300)
> [ 5236.016954] ata5.00: configured for UDMA/33
> [ 5236.972532] ata1: softreset failed (device not ready)
> [ 5236.972535] ata1: failed due to HW bug, retry pmp=0
> [ 5237.136543] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5237.137311] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5237.138164] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5237.138166] ata1.00: configured for UDMA/100
> [ 5237.152072] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> [ 5237.152090] sd 0:0:0:0: [sda] Write Protect is off
> [ 5237.152092] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5237.152116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5237.360036] usb 1-10: reset high speed USB device using ehci_hcd and address 2
> [ 5237.504511] PM: resume devices took 1.880 seconds
> [ 5237.504574] PM: Finishing wakeup.
> [ 5237.504575] Restarting tasks ... 
^---
v---
Waiting for suspend to complete 29 to go ...
> [ 5262.576949] CPU0 attaching NULL sched-domain.
> [ 5262.576967] CPU1 attaching NULL sched-domain.
> [ 5262.592673] CPU0 attaching sched-domain:
> [ 5262.592682]  domain 0: span 0-1 level CPU
> [ 5262.592688]   groups: 0 1
> [ 5262.592700] CPU1 attaching sched-domain:
> [ 5262.592704]  domain 0: span 0-1 level CPU
> [ 5262.592708]   groups: 1 0
> [ 5262.972650] wlan0: disassociating by local choice (reason=3)
> [ 5263.340885] [drm] Num pipes: 1
> [ 5264.222535] PM: Syncing filesystems ... done.
> [ 5264.354264] PM: Preparing system for mem sleep
> [ 5264.354268] Freezing user space processes ... (elapsed 0.00 seconds) done.
> [ 5264.355281] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> [ 5264.355362] PM: Entering mem sleep
> [ 5264.355384] Suspending console(s) (use no_console_suspend to debug)
> [ 5264.892554] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 5264.892631] sd 0:0:0:0: [sda] Stopping disk
> [ 5265.377063] ath5k_pci 0000:04:00.0: PCI INT A disabled
> [ 5265.392083] ACPI handle has no context!
> [ 5265.392088] ACPI handle has no context!
> [ 5265.408044] HDA Intel 0000:00:14.2: PCI INT A disabled
> [ 5265.424110] pata_atiixp 0000:00:14.1: PCI INT A disabled
> [ 5265.424193] ehci_hcd 0000:00:13.5: PCI INT D disabled
> [ 5265.440088] ehci_hcd 0000:00:13.5: power state changed by ACPI to D3
> [ 5265.440128] ohci_hcd 0000:00:13.4: PCI INT C disabled
> [ 5265.440162] ohci_hcd 0000:00:13.3: PCI INT B disabled
> [ 5265.440197] ohci_hcd 0000:00:13.2: PCI INT C disabled
> [ 5265.440230] ohci_hcd 0000:00:13.1: PCI INT B disabled
> [ 5265.440264] ohci_hcd 0000:00:13.0: PCI INT A disabled
> [ 5265.504143] ahci 0000:00:12.0: PCI INT A disabled
> [ 5265.504355] PM: suspend devices took 1.152 seconds
> [ 5265.514669] ACPI: Preparing to enter system sleep state S3
> [ 5265.520270] Disabling non-boot CPUs ...
> [ 5265.624021] CPU 1 is now offline
> [ 5265.624023] SMP alternatives: switching to UP code
> [ 5265.784048] CPU0 attaching NULL sched-domain.
> [ 5265.784052] CPU1 attaching NULL sched-domain.
> [ 5265.796027] CPU0 attaching NULL sched-domain.
> [ 5265.796257] CPU1 is down
> [ 5265.796257] Back to C!
> [ 5265.796257] ahci 0000:00:12.0: set SATA to AHCI mode
> [ 5265.796257] Enabling non-boot CPUs ...
> [ 5265.796257] SMP alternatives: switching to SMP code
> [ 5265.957603] Booting processor 1 APIC 0x1 ip 0x6000
> [ 5265.783858] Initializing CPU#1
> [ 5265.783858] Calibrating delay using timer specific routine.. 4002.43 BogoMIPS (lpj=8004860)
> [ 5265.783858] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 5265.783858] CPU: L2 Cache: 512K (64 bytes/line)
> [ 5265.783858] CPU: Physical Processor ID: 0
> [ 5265.783858] CPU: Processor Core ID: 1
> [ 5266.048186] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> [ 5266.048234] CPU0 attaching NULL sched-domain.
> [ 5266.048243] Switch to broadcast mode on CPU1
> [ 5266.048535] Switched to high resolution mode on CPU 1
> [ 5266.057323] CPU0 attaching sched-domain:
> [ 5266.057327]  domain 0: span 0-1 level CPU
> [ 5266.057329]   groups: 0 1
> [ 5266.057334] CPU1 attaching sched-domain:
> [ 5266.057335]  domain 0: span 0-1 level CPU
> [ 5266.057337]   groups: 1 0
> [ 5266.060024] CPU1 is up
> [ 5266.060027] ACPI: Waking up from system sleep state S3
> [ 5266.155910] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5266.155928] pcieport-driver 0000:00:04.0: setting latency timer to 64
> [ 5266.155943] pcieport-driver 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5266.155958] pcieport-driver 0000:00:05.0: setting latency timer to 64
> [ 5266.155971] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5266.155986] pcieport-driver 0000:00:06.0: setting latency timer to 64
> [ 5266.156022] ahci 0000:00:12.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300007)
> [ 5266.156038] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 5266.156121] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5266.166475] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 5266.180034] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5266.204029] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5266.228028] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5266.252028] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5266.276091] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
> [ 5266.292029] ehci_hcd 0000:00:13.5: enabling device (0000 -> 0002)
> [ 5266.292033] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 5266.292065] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00006, writing 0x2b00117)
> [ 5266.292132] pata_atiixp 0000:00:14.1: restoring config space at offset 0x1 (was 0x2200011, writing 0x2200015)
> [ 5266.292142] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5266.308054] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
> [ 5266.308067] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5266.308176] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5266.308209] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5266.308274] ath5k_pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
> [ 5266.324030] ath5k_pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5266.324133] sd 0:0:0:0: [sda] Starting disk
> [ 5266.473012] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> [ 5266.473014] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> [ 5266.476556] ata3: SATA link down (SStatus 0 SControl 300)
> [ 5266.476582] ata2: SATA link down (SStatus 0 SControl 300)
> [ 5266.476606] ata4: SATA link down (SStatus 0 SControl 300)
> [ 5266.520961] ata5.00: configured for UDMA/33
> [ 5267.480532] ata1: softreset failed (device not ready)
> [ 5267.480535] ata1: failed due to HW bug, retry pmp=0
> [ 5267.644543] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5267.645291] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5267.646146] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5267.646148] ata1.00: configured for UDMA/100
> [ 5267.660068] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> [ 5267.660087] sd 0:0:0:0: [sda] Write Protect is off
> [ 5267.660089] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5267.660114] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5267.868032] usb 1-10: reset high speed USB device using ehci_hcd and address 2
> [ 5268.012521] PM: resume devices took 1.884 seconds
> [ 5268.012582] PM: Finishing wakeup.
> [ 5268.012584] Restarting tasks ... done.
> [ 5268.077237] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
> [ 5270.230704] r8169: eth0: link down
> [ 5270.231593] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 5270.378452] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 5270.481220] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5270.481244] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5270.680042] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 2
> [ 5270.880043] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 3
> [ 5271.022521] [drm] Loading RS690/RS740 Microcode
> [ 5271.022541] [drm] Num pipes: 1
> [ 5271.087136] wlan0: direct probe to AP 00:1c:df:3a:14:f5 timed out
> [ 5271.452800] CPU0 attaching NULL sched-domain.
> [ 5271.452822] CPU1 attaching NULL sched-domain.
> [ 5271.472722] CPU0 attaching sched-domain:
> [ 5271.472736]  domain 0: span 0-1 level MC
> [ 5271.472742]   groups: 0 1
> [ 5271.472752]   domain 1: span 0-1 level CPU
> [ 5271.472757]    groups: 0-1
> [ 5271.472769] CPU1 attaching sched-domain:
> [ 5271.472773]  domain 0: span 0-1 level MC
> [ 5271.472777]   groups: 1 0
> [ 5271.472784]   domain 1: span 0-1 level CPU
> [ 5271.472788]    groups: 0-1
^---
v---
Waiting for suspend to complete 29 to go ...
> [ 5292.148063] CPU0 attaching NULL sched-domain.
> [ 5292.148080] CPU1 attaching NULL sched-domain.
> [ 5292.160676] CPU0 attaching sched-domain:
> [ 5292.160685]  domain 0: span 0-1 level CPU
> [ 5292.160690]   groups: 0 1
> [ 5292.160702] CPU1 attaching sched-domain:
> [ 5292.160706]  domain 0: span 0-1 level CPU
> [ 5292.160710]   groups: 1 0
> [ 5292.564666] wlan0: disassociating by local choice (reason=3)
> [ 5292.940891] [drm] Num pipes: 1
> [ 5293.684269] PM: Syncing filesystems ... done.
> [ 5293.695553] PM: Preparing system for mem sleep
> [ 5293.695556] Freezing user space processes ... (elapsed 0.00 seconds) done.
> [ 5293.696500] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> [ 5293.696581] PM: Entering mem sleep
> [ 5293.696604] Suspending console(s) (use no_console_suspend to debug)
> [ 5294.224544] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 5294.224661] sd 0:0:0:0: [sda] Stopping disk
> [ 5294.706407] ath5k_pci 0000:04:00.0: PCI INT A disabled
> [ 5294.720100] ACPI handle has no context!
> [ 5294.720105] ACPI handle has no context!
> [ 5294.736057] HDA Intel 0000:00:14.2: PCI INT A disabled
> [ 5294.752124] pata_atiixp 0000:00:14.1: PCI INT A disabled
> [ 5294.752208] ehci_hcd 0000:00:13.5: PCI INT D disabled
> [ 5294.768100] ehci_hcd 0000:00:13.5: power state changed by ACPI to D3
> [ 5294.768139] ohci_hcd 0000:00:13.4: PCI INT C disabled
> [ 5294.768173] ohci_hcd 0000:00:13.3: PCI INT B disabled
> [ 5294.768207] ohci_hcd 0000:00:13.2: PCI INT C disabled
> [ 5294.768241] ohci_hcd 0000:00:13.1: PCI INT B disabled
> [ 5294.768276] ohci_hcd 0000:00:13.0: PCI INT A disabled
> [ 5294.832159] ahci 0000:00:12.0: PCI INT A disabled
> [ 5294.832371] PM: suspend devices took 1.136 seconds
> [ 5294.843346] ACPI: Preparing to enter system sleep state S3
> [ 5294.849255] Disabling non-boot CPUs ...
> [ 5294.952024] CPU 1 is now offline
> [ 5294.952027] SMP alternatives: switching to UP code
> [ 5295.110928] CPU0 attaching NULL sched-domain.
> [ 5295.110932] CPU1 attaching NULL sched-domain.
> [ 5295.116471] CPU0 attaching NULL sched-domain.
> [ 5295.116700] CPU1 is down
> [ 5295.116700] Back to C!
> [ 5295.116700] ahci 0000:00:12.0: set SATA to AHCI mode
> [ 5295.116700] Enabling non-boot CPUs ...
> [ 5295.116700] SMP alternatives: switching to SMP code
> [ 5295.278050] Booting processor 1 APIC 0x1 ip 0x6000
> [ 5295.110746] Initializing CPU#1
> [ 5295.110746] Calibrating delay using timer specific routine.. 3998.00 BogoMIPS (lpj=7996015)
> [ 5295.110746] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 5295.110746] CPU: L2 Cache: 512K (64 bytes/line)
> [ 5295.110746] CPU: Physical Processor ID: 0
> [ 5295.110746] CPU: Processor Core ID: 1
> [ 5295.368212] Switch to broadcast mode on CPU1
> [ 5295.368225] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> [ 5295.368258] CPU0 attaching NULL sched-domain.
> [ 5295.368535] Switched to high resolution mode on CPU 1
> [ 5295.385315] CPU0 attaching sched-domain:
> [ 5295.385319]  domain 0: span 0-1 level CPU
> [ 5295.385321]   groups: 0 1
> [ 5295.385326] CPU1 attaching sched-domain:
> [ 5295.385327]  domain 0: span 0-1 level CPU
> [ 5295.385328]   groups: 1 0
> [ 5295.388027] CPU1 is up
> [ 5295.388029] ACPI: Waking up from system sleep state S3
> [ 5295.481110] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5295.481128] pcieport-driver 0000:00:04.0: setting latency timer to 64
> [ 5295.481143] pcieport-driver 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5295.481158] pcieport-driver 0000:00:05.0: setting latency timer to 64
> [ 5295.481172] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5295.481186] pcieport-driver 0000:00:06.0: setting latency timer to 64
> [ 5295.481217] ahci 0000:00:12.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300007)
> [ 5295.481232] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 5295.481309] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5295.481919] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 5295.504049] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5295.528051] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5295.552051] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5295.576050] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5295.600114] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
> [ 5295.616045] ehci_hcd 0000:00:13.5: enabling device (0000 -> 0002)
> [ 5295.616048] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 5295.616080] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00006, writing 0x2b00117)
> [ 5295.616147] pata_atiixp 0000:00:14.1: restoring config space at offset 0x1 (was 0x2200011, writing 0x2200015)
> [ 5295.616156] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5295.632066] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
> [ 5295.632078] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5295.632187] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5295.632222] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5295.632287] ath5k_pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
> [ 5295.648045] ath5k_pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5295.648148] sd 0:0:0:0: [sda] Starting disk
> [ 5295.797007] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> [ 5295.797009] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> [ 5295.800556] ata3: SATA link down (SStatus 0 SControl 300)
> [ 5295.800581] ata2: SATA link down (SStatus 0 SControl 300)
> [ 5295.800605] ata4: SATA link down (SStatus 0 SControl 300)
> [ 5295.844955] ata5.00: configured for UDMA/33
> [ 5296.804534] ata1: softreset failed (device not ready)
> [ 5296.804537] ata1: failed due to HW bug, retry pmp=0
> [ 5296.968543] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5296.969312] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5296.970165] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5296.970167] ata1.00: configured for UDMA/100
> [ 5296.984073] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> [ 5296.984091] sd 0:0:0:0: [sda] Write Protect is off
> [ 5296.984093] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5296.984117] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5297.204064] usb 1-10: reset high speed USB device using ehci_hcd and address 2
> [ 5297.348688] PM: resume devices took 1.892 seconds
> [ 5297.348751] PM: Finishing wakeup.
> [ 5297.348753] Restarting tasks ... done.
> [ 5297.407830] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
> [ 5299.109012] r8169: eth0: link down
> [ 5299.110063] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 5299.154639] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 5299.224514] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5299.274992] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5299.472032] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 2
> [ 5299.672026] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 3
> [ 5299.872052] wlan0: direct probe to AP 00:1c:df:3a:14:f5 timed out
> [ 5299.902515] [drm] Loading RS690/RS740 Microcode
> [ 5299.902533] [drm] Num pipes: 1
> [ 5300.411022] CPU0 attaching NULL sched-domain.
> [ 5300.411044] CPU1 attaching NULL sched-domain.
> [ 5300.424680] CPU0 attaching sched-domain:
> [ 5300.424689]  domain 0: span 0-1 level CPU
> [ 5300.424695]   groups: 0 1
> [ 5300.424706] CPU1 attaching sched-domain:
> [ 5300.424711]  domain 0: span 0-1 level CPU
> [ 5300.424715]   groups: 1 0
^---
v---
Waiting for suspend to complete 29 to go ...
> [ 5310.019902] CPU0 attaching NULL sched-domain.
> [ 5310.019919] CPU1 attaching NULL sched-domain.
> [ 5310.036733] CPU0 attaching sched-domain:
> [ 5310.036742]  domain 0: span 0-1 level CPU
> [ 5310.036748]   groups: 0 1
> [ 5310.036760] CPU1 attaching sched-domain:
> [ 5310.036764]  domain 0: span 0-1 level CPU
> [ 5310.036770]   groups: 1 0
> [ 5310.532960] [drm] Num pipes: 1
> [ 5311.296681] PM: Syncing filesystems ... done.
> [ 5311.307948] PM: Preparing system for mem sleep
> [ 5311.307952] Freezing user space processes ... (elapsed 0.00 seconds) done.
> [ 5311.312574] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> [ 5311.320650] PM: Entering mem sleep
> [ 5311.320672] Suspending console(s) (use no_console_suspend to debug)
> [ 5311.853079] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 5311.853195] sd 0:0:0:0: [sda] Stopping disk
> [ 5312.333396] ath5k_pci 0000:04:00.0: PCI INT A disabled
> [ 5312.348090] ACPI handle has no context!
> [ 5312.348095] ACPI handle has no context!
> [ 5312.364049] HDA Intel 0000:00:14.2: PCI INT A disabled
> [ 5312.380115] pata_atiixp 0000:00:14.1: PCI INT A disabled
> [ 5312.380198] ehci_hcd 0000:00:13.5: PCI INT D disabled
> [ 5312.396094] ehci_hcd 0000:00:13.5: power state changed by ACPI to D3
> [ 5312.396135] ohci_hcd 0000:00:13.4: PCI INT C disabled
> [ 5312.396169] ohci_hcd 0000:00:13.3: PCI INT B disabled
> [ 5312.396202] ohci_hcd 0000:00:13.2: PCI INT C disabled
> [ 5312.396237] ohci_hcd 0000:00:13.1: PCI INT B disabled
> [ 5312.396271] ohci_hcd 0000:00:13.0: PCI INT A disabled
> [ 5312.460148] ahci 0000:00:12.0: PCI INT A disabled
> [ 5312.460358] PM: suspend devices took 1.140 seconds
> [ 5312.471117] ACPI: Preparing to enter system sleep state S3
> [ 5312.476643] Disabling non-boot CPUs ...
> [ 5312.478967] CPU 1 is now offline
> [ 5312.478970] SMP alternatives: switching to UP code
> [ 5312.640067] CPU0 attaching NULL sched-domain.
> [ 5312.640071] CPU1 attaching NULL sched-domain.
> [ 5312.652476] CPU0 attaching NULL sched-domain.
> [ 5312.652711] CPU1 is down
> [ 5312.652711] Back to C!
> [ 5312.652711] ahci 0000:00:12.0: set SATA to AHCI mode
> [ 5312.652711] Enabling non-boot CPUs ...
> [ 5312.652711] SMP alternatives: switching to SMP code
> [ 5312.815391] Booting processor 1 APIC 0x1 ip 0x6000
> [ 5312.639874] Initializing CPU#1
> [ 5312.639874] Calibrating delay using timer specific routine.. 4000.02 BogoMIPS (lpj=8000055)
> [ 5312.639874] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 5312.639874] CPU: L2 Cache: 512K (64 bytes/line)
> [ 5312.639874] CPU: Physical Processor ID: 0
> [ 5312.639874] CPU: Processor Core ID: 1
> [ 5312.639874] Switch to broadcast mode on CPU1
> [ 5312.904234] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> [ 5312.904273] CPU0 attaching NULL sched-domain.
> [ 5312.904535] Switched to high resolution mode on CPU 1
> [ 5312.921304] CPU0 attaching sched-domain:
> [ 5312.921308]  domain 0: span 0-1 level CPU
> [ 5312.921310]   groups: 0 1
> [ 5312.921315] CPU1 attaching sched-domain:
> [ 5312.921316]  domain 0: span 0-1 level CPU
> [ 5312.921317]   groups: 1 0
> [ 5312.924030] CPU1 is up
> [ 5312.924033] ACPI: Waking up from system sleep state S3
> [ 5313.022217] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5313.022235] pcieport-driver 0000:00:04.0: setting latency timer to 64
> [ 5313.022250] pcieport-driver 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5313.022264] pcieport-driver 0000:00:05.0: setting latency timer to 64
> [ 5313.022278] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5313.022292] pcieport-driver 0000:00:06.0: setting latency timer to 64
> [ 5313.022324] ahci 0000:00:12.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300007)
> [ 5313.022339] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 5313.022417] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5313.023060] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 5313.044041] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5313.068039] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5313.092039] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5313.116039] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5313.140103] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
> [ 5313.156037] ehci_hcd 0000:00:13.5: enabling device (0000 -> 0002)
> [ 5313.156041] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 5313.156074] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00006, writing 0x2b00117)
> [ 5313.156141] pata_atiixp 0000:00:14.1: restoring config space at offset 0x1 (was 0x2200011, writing 0x2200015)
> [ 5313.156150] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5313.172061] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
> [ 5313.172073] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5313.172183] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5313.172217] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5313.172281] ath5k_pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
> [ 5313.188038] ath5k_pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5313.188141] sd 0:0:0:0: [sda] Starting disk
> [ 5313.337007] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> [ 5313.337009] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> [ 5313.340555] ata3: SATA link down (SStatus 0 SControl 300)
> [ 5313.340581] ata2: SATA link down (SStatus 0 SControl 300)
> [ 5313.340605] ata4: SATA link down (SStatus 0 SControl 300)
> [ 5313.384958] ata5.00: configured for UDMA/33
> [ 5314.288533] ata1: softreset failed (device not ready)
> [ 5314.288536] ata1: failed due to HW bug, retry pmp=0
> [ 5314.452543] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5314.453324] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5314.454177] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5314.454179] ata1.00: configured for UDMA/100
> [ 5314.468072] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> [ 5314.468090] sd 0:0:0:0: [sda] Write Protect is off
> [ 5314.468092] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5314.468117] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5314.680036] usb 1-10: reset high speed USB device using ehci_hcd and address 2
> [ 5314.825142] PM: resume devices took 1.832 seconds
> [ 5314.825205] PM: Finishing wakeup.
> [ 5314.825207] Restarting tasks ... done.
> [ 5314.915492] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
> [ 5314.994462] CPU0 attaching NULL sched-domain.
> [ 5314.994470] CPU1 attaching NULL sched-domain.
> [ 5315.012082] CPU0 attaching sched-domain:
> [ 5315.012085]  domain 0: span 0-1 level MC
> [ 5315.012088]   groups: 0 1
> [ 5315.012091]   domain 1: span 0-1 level CPU
> [ 5315.012093]    groups: 0-1
> [ 5315.012096] CPU1 attaching sched-domain:
> [ 5315.012098]  domain 0: span 0-1 level MC
> [ 5315.012100]   groups: 1 0
> [ 5315.012102]   domain 1: span 0-1 level CPU
> [ 5315.012104]    groups: 0-1
> [ 5316.076288] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
> [ 5316.922629] r8169: eth0: link down
> [ 5316.923518] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 5317.053780] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 5317.107487] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5317.304038] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 2
> [ 5317.504037] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 3
> [ 5317.704039] wlan0: direct probe to AP 00:1c:df:3a:14:f5 timed out
> [ 5317.717310] [drm] Loading RS690/RS740 Microcode
> [ 5317.717329] [drm] Num pipes: 1
> [ 5317.961555] CPU0 attaching NULL sched-domain.
> [ 5317.961573] CPU1 attaching NULL sched-domain.
> [ 5317.976181] CPU0 attaching sched-domain:
> [ 5317.976192]  domain 0: span 0-1 level MC
> [ 5317.976198]   groups: 0 1
> [ 5317.976207]   domain 1: span 0-1 level CPU
> [ 5317.976212]    groups: 0-1
> [ 5317.976221] CPU1 attaching sched-domain:
> [ 5317.976225]  domain 0: span 0-1 level MC
> [ 5317.976229]   groups: 1 0
> [ 5317.976235]   domain 1: span 0-1 level CPU
> [ 5317.976239]    groups: 0-1
^---
v---
Waiting for suspend to complete 29 to go ...
> [ 5324.884680] CPU0 attaching NULL sched-domain.
> [ 5324.884701] CPU1 attaching NULL sched-domain.
> [ 5324.912239] CPU0 attaching sched-domain:
> [ 5324.912247]  domain 0: span 0-1 level CPU
> [ 5324.912254]   groups: 0 1
> [ 5324.912267] CPU1 attaching sched-domain:
> [ 5324.912271]  domain 0: span 0-1 level CPU
> [ 5324.912275]   groups: 1 0
> [ 5325.412890] [drm] Num pipes: 1
> [ 5326.161029] PM: Syncing filesystems ... done.
> [ 5326.171986] PM: Preparing system for mem sleep
> [ 5326.171990] Freezing user space processes ... (elapsed 0.00 seconds) done.
> [ 5326.172971] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> [ 5326.173055] PM: Entering mem sleep
> [ 5326.173078] Suspending console(s) (use no_console_suspend to debug)
> [ 5326.709087] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 5326.709171] sd 0:0:0:0: [sda] Stopping disk
> [ 5327.189614] ath5k_pci 0000:04:00.0: PCI INT A disabled
> [ 5327.204094] ACPI handle has no context!
> [ 5327.204099] ACPI handle has no context!
> [ 5327.220049] HDA Intel 0000:00:14.2: PCI INT A disabled
> [ 5327.236117] pata_atiixp 0000:00:14.1: PCI INT A disabled
> [ 5327.236202] ehci_hcd 0000:00:13.5: PCI INT D disabled
> [ 5327.252093] ehci_hcd 0000:00:13.5: power state changed by ACPI to D3
> [ 5327.252133] ohci_hcd 0000:00:13.4: PCI INT C disabled
> [ 5327.252167] ohci_hcd 0000:00:13.3: PCI INT B disabled
> [ 5327.252200] ohci_hcd 0000:00:13.2: PCI INT C disabled
> [ 5327.252234] ohci_hcd 0000:00:13.1: PCI INT B disabled
> [ 5327.252268] ohci_hcd 0000:00:13.0: PCI INT A disabled
> [ 5327.316150] ahci 0000:00:12.0: PCI INT A disabled
> [ 5327.316361] PM: suspend devices took 1.144 seconds
> [ 5327.327314] ACPI: Preparing to enter system sleep state S3
> [ 5327.333849] Disabling non-boot CPUs ...
> [ 5327.336163] CPU 1 is now offline
> [ 5327.336166] SMP alternatives: switching to UP code
> [ 5327.495978] CPU0 attaching NULL sched-domain.
> [ 5327.495982] CPU1 attaching NULL sched-domain.
> [ 5327.500472] CPU0 attaching NULL sched-domain.
> [ 5327.500704] CPU1 is down
> [ 5327.500704] Back to C!
> [ 5327.500704] ahci 0000:00:12.0: set SATA to AHCI mode
> [ 5327.500704] Enabling non-boot CPUs ...
> [ 5327.500704] SMP alternatives: switching to SMP code
> [ 5327.662668] Booting processor 1 APIC 0x1 ip 0x6000
> [ 5327.495785] Initializing CPU#1
> [ 5327.495785] Calibrating delay using timer specific routine.. 3999.95 BogoMIPS (lpj=7999907)
> [ 5327.495785] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 5327.495785] CPU: L2 Cache: 512K (64 bytes/line)
> [ 5327.495785] CPU: Physical Processor ID: 0
> [ 5327.495785] CPU: Processor Core ID: 1
> [ 5327.495785] Switch to broadcast mode on CPU1
> [ 5327.752208] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> [ 5327.752239] CPU0 attaching NULL sched-domain.
> [ 5327.752535] Switched to high resolution mode on CPU 1
> [ 5327.769295] CPU0 attaching sched-domain:
> [ 5327.769299]  domain 0: span 0-1 level CPU
> [ 5327.769301]   groups: 0 1
> [ 5327.769306] CPU1 attaching sched-domain:
> [ 5327.769307]  domain 0: span 0-1 level CPU
> [ 5327.769308]   groups: 1 0
> [ 5327.772032] CPU1 is up
> [ 5327.772034] ACPI: Waking up from system sleep state S3
> [ 5327.866063] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 5327.866371] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5327.866389] pcieport-driver 0000:00:04.0: setting latency timer to 64
> [ 5327.866404] pcieport-driver 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5327.866419] pcieport-driver 0000:00:05.0: setting latency timer to 64
> [ 5327.866446] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5327.866460] pcieport-driver 0000:00:06.0: setting latency timer to 64
> [ 5327.866489] ahci 0000:00:12.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300007)
> [ 5327.866505] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 5327.866616] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5327.888037] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5327.912038] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5327.936038] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5327.960037] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5327.984100] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
> [ 5328.000044] ehci_hcd 0000:00:13.5: enabling device (0000 -> 0002)
> [ 5328.000048] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 5328.000080] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00006, writing 0x2b00117)
> [ 5328.000147] pata_atiixp 0000:00:14.1: restoring config space at offset 0x1 (was 0x2200011, writing 0x2200015)
> [ 5328.000155] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5328.016060] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
> [ 5328.016073] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5328.016182] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5328.016216] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5328.016279] ath5k_pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
> [ 5328.032038] ath5k_pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5328.032141] sd 0:0:0:0: [sda] Starting disk
> [ 5328.181007] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> [ 5328.181009] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> [ 5328.184560] ata2: SATA link down (SStatus 0 SControl 300)
> [ 5328.184567] ata4: SATA link down (SStatus 0 SControl 300)
> [ 5328.184593] ata3: SATA link down (SStatus 0 SControl 300)
> [ 5328.228955] ata5.00: configured for UDMA/33
> [ 5329.132533] ata1: softreset failed (device not ready)
> [ 5329.132536] ata1: failed due to HW bug, retry pmp=0
> [ 5329.296543] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5329.297292] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5329.298143] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5329.298145] ata1.00: configured for UDMA/100
> [ 5329.312072] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> [ 5329.312090] sd 0:0:0:0: [sda] Write Protect is off
> [ 5329.312092] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5329.312118] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5329.520036] usb 1-10: reset high speed USB device using ehci_hcd and address 2
> [ 5329.664973] PM: resume devices took 1.828 seconds
> [ 5329.665035] PM: Finishing wakeup.
> [ 5329.665037] Restarting tasks ... done.
> [ 5329.726299] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
> [ 5329.877188] CPU0 attaching NULL sched-domain.
> [ 5329.877195] CPU1 attaching NULL sched-domain.
> [ 5329.888567] CPU0 attaching sched-domain:
> [ 5329.888571]  domain 0: span 0-1 level CPU
> [ 5329.888573]   groups: 0 1
> [ 5329.888578] CPU1 attaching sched-domain:
> [ 5329.888579]  domain 0: span 0-1 level CPU
> [ 5329.888581]   groups: 1 0
> [ 5331.547038] r8169: eth0: link down
> [ 5331.547924] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 5331.661846] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 5331.717932] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5331.916042] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 2
> [ 5332.116552] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 3
> [ 5332.316075] wlan0: direct probe to AP 00:1c:df:3a:14:f5 timed out
> [ 5332.344166] [drm] Loading RS690/RS740 Microcode
> [ 5332.344199] [drm] Num pipes: 1
> [ 5332.782305] CPU0 attaching NULL sched-domain.
> [ 5332.782324] CPU1 attaching NULL sched-domain.
> [ 5332.800167] CPU0 attaching sched-domain:
> [ 5332.800176]  domain 0: span 0-1 level CPU
> [ 5332.800182]   groups: 0 1
> [ 5332.800194] CPU1 attaching sched-domain:
> [ 5332.800198]  domain 0: span 0-1 level CPU
> [ 5332.800202]   groups: 1 0
^---
v---
Waiting for suspend to complete 29 to go ...
> [ 5363.384962] CPU0 attaching NULL sched-domain.
> [ 5363.384980] CPU1 attaching NULL sched-domain.
> [ 5363.400676] CPU0 attaching sched-domain:
> [ 5363.400683]  domain 0: span 0-1 level CPU
> [ 5363.400689]   groups: 0 1
> [ 5363.400702] CPU1 attaching sched-domain:
> [ 5363.400706]  domain 0: span 0-1 level CPU
> [ 5363.400711]   groups: 1 0
> [ 5363.784155] wlan0: disassociating by local choice (reason=3)
> [ 5363.810375] wlan0: direct probe to AP 00:22:a4:53:be:29 try 1
> [ 5363.812981] wlan0 direct probe responded
> [ 5363.812988] wlan0: authenticate with AP 00:22:a4:53:be:29
> [ 5363.814415] wlan0: authenticated
> [ 5363.814420] wlan0: associate with AP 00:22:a4:53:be:29
> [ 5363.820593] wlan0: RX AssocResp from 00:22:a4:53:be:29 (capab=0x431 status=0 aid=1)
> [ 5363.820603] wlan0: associated
> [ 5363.825151] wlan0: disassociating by local choice (reason=3)
> [ 5364.180888] [drm] Num pipes: 1
> [ 5365.017038] PM: Syncing filesystems ... done.
> [ 5365.146526] PM: Preparing system for mem sleep
> [ 5365.146531] Freezing user space processes ... (elapsed 0.00 seconds) done.
> [ 5365.147445] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> [ 5365.147527] PM: Entering mem sleep
> [ 5365.147551] Suspending console(s) (use no_console_suspend to debug)
> [ 5365.680275] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 5365.680354] sd 0:0:0:0: [sda] Stopping disk
> [ 5366.177911] ath5k_pci 0000:04:00.0: PCI INT A disabled
> [ 5366.192092] ACPI handle has no context!
> [ 5366.192098] ACPI handle has no context!
> [ 5366.208049] HDA Intel 0000:00:14.2: PCI INT A disabled
> [ 5366.224115] pata_atiixp 0000:00:14.1: PCI INT A disabled
> [ 5366.224199] ehci_hcd 0000:00:13.5: PCI INT D disabled
> [ 5366.240094] ehci_hcd 0000:00:13.5: power state changed by ACPI to D3
> [ 5366.240134] ohci_hcd 0000:00:13.4: PCI INT C disabled
> [ 5366.240168] ohci_hcd 0000:00:13.3: PCI INT B disabled
> [ 5366.240202] ohci_hcd 0000:00:13.2: PCI INT C disabled
> [ 5366.240236] ohci_hcd 0000:00:13.1: PCI INT B disabled
> [ 5366.240269] ohci_hcd 0000:00:13.0: PCI INT A disabled
> [ 5366.304189] ahci 0000:00:12.0: PCI INT A disabled
> [ 5366.304404] PM: suspend devices took 1.160 seconds
> [ 5366.315867] ACPI: Preparing to enter system sleep state S3
> [ 5366.322456] Disabling non-boot CPUs ...
> [ 5366.324774] CPU 1 is now offline
> [ 5366.324777] SMP alternatives: switching to UP code
> [ 5366.484588] CPU0 attaching NULL sched-domain.
> [ 5366.484592] CPU1 attaching NULL sched-domain.
> [ 5366.492492] CPU0 attaching NULL sched-domain.
> [ 5366.492726] CPU1 is down
> [ 5366.492726] Back to C!
> [ 5366.492726] ahci 0000:00:12.0: set SATA to AHCI mode
> [ 5366.492726] Enabling non-boot CPUs ...
> [ 5366.492726] SMP alternatives: switching to SMP code
> [ 5366.655607] Booting processor 1 APIC 0x1 ip 0x6000
> [ 5366.484416] Initializing CPU#1
> [ 5366.484416] Calibrating delay using timer specific routine.. 4000.01 BogoMIPS (lpj=8000028)
> [ 5366.484416] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 5366.484416] CPU: L2 Cache: 512K (64 bytes/line)
> [ 5366.484416] CPU: Physical Processor ID: 0
> [ 5366.484416] CPU: Processor Core ID: 1
> [ 5366.744156] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> [ 5366.744206] CPU0 attaching NULL sched-domain.
> [ 5366.744241] Switch to broadcast mode on CPU1
> [ 5366.744533] Switched to high resolution mode on CPU 1
> [ 5366.761301] CPU0 attaching sched-domain:
> [ 5366.761305]  domain 0: span 0-1 level CPU
> [ 5366.761307]   groups: 0 1
> [ 5366.761312] CPU1 attaching sched-domain:
> [ 5366.761313]  domain 0: span 0-1 level CPU
> [ 5366.761314]   groups: 1 0
> [ 5366.764028] CPU1 is up
> [ 5366.764030] ACPI: Waking up from system sleep state S3
> [ 5366.863576] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5366.863595] pcieport-driver 0000:00:04.0: setting latency timer to 64
> [ 5366.863610] pcieport-driver 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5366.863624] pcieport-driver 0000:00:05.0: setting latency timer to 64
> [ 5366.863638] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5366.863652] pcieport-driver 0000:00:06.0: setting latency timer to 64
> [ 5366.863684] ahci 0000:00:12.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300007)
> [ 5366.863699] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 5366.863772] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5366.870741] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 5366.884047] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5366.908038] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5366.932038] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5366.956038] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5366.980101] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
> [ 5366.996036] ehci_hcd 0000:00:13.5: enabling device (0000 -> 0002)
> [ 5366.996040] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 5366.996072] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00006, writing 0x2b00117)
> [ 5366.996139] pata_atiixp 0000:00:14.1: restoring config space at offset 0x1 (was 0x2200011, writing 0x2200015)
> [ 5366.996148] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5367.012060] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
> [ 5367.012072] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5367.012181] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5367.012215] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5367.012278] ath5k_pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
> [ 5367.028038] ath5k_pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5367.028142] sd 0:0:0:0: [sda] Starting disk
> [ 5367.177007] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> [ 5367.177010] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> [ 5367.180557] ata4: SATA link down (SStatus 0 SControl 300)
> [ 5367.180582] ata3: SATA link down (SStatus 0 SControl 300)
> [ 5367.180606] ata2: SATA link down (SStatus 0 SControl 300)
> [ 5367.224955] ata5.00: configured for UDMA/33
> [ 5368.128533] ata1: softreset failed (device not ready)
> [ 5368.128536] ata1: failed due to HW bug, retry pmp=0
> [ 5368.292543] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5368.293304] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5368.294152] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5368.294153] ata1.00: configured for UDMA/100
> [ 5368.308072] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> [ 5368.308090] sd 0:0:0:0: [sda] Write Protect is off
> [ 5368.308092] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5368.308117] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5368.524036] usb 1-10: reset high speed USB device using ehci_hcd and address 2
> [ 5368.669446] PM: resume devices took 1.832 seconds
> [ 5368.669509] PM: Finishing wakeup.
> [ 5368.669510] Restarting tasks ... done.
> [ 5368.744128] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
> [ 5369.862179] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
> [ 5370.617936] r8169: eth0: link down
> [ 5370.618862] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 5370.745385] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 5370.775097] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5370.803512] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5371.000530] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 2
> [ 5371.200054] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 3
> [ 5371.400043] wlan0: direct probe to AP 00:1c:df:3a:14:f5 timed out
> [ 5371.410227] [drm] Loading RS690/RS740 Microcode
> [ 5371.410251] [drm] Num pipes: 1
> [ 5371.783435] CPU0 attaching NULL sched-domain.
> [ 5371.783455] CPU1 attaching NULL sched-domain.
> [ 5371.800163] CPU0 attaching sched-domain:
> [ 5371.800170]  domain 0: span 0-1 level MC
> [ 5371.800177]   groups: 0 1
> [ 5371.800186]   domain 1: span 0-1 level CPU
> [ 5371.800191]    groups: 0-1
> [ 5371.800199] CPU1 attaching sched-domain:
> [ 5371.800203]  domain 0: span 0-1 level MC
> [ 5371.800207]   groups: 1 0
> [ 5371.800213]   domain 1: span 0-1 level CPU
> [ 5371.800217]    groups: 0-1
^---
before: 4202 mWh
after: 4160 mWh
consumed: 42 mW
sleep seconds: 1228 sec
overall usage: 123 mW
v---
Waiting for suspend to complete 29 to go ...
> [ 5394.969501] CPU0 attaching NULL sched-domain.
> [ 5394.969520] CPU1 attaching NULL sched-domain.
> [ 5394.984175] CPU0 attaching sched-domain:
> [ 5394.984183]  domain 0: span 0-1 level CPU
> [ 5394.984189]   groups: 0 1
> [ 5394.984202] CPU1 attaching sched-domain:
> [ 5394.984206]  domain 0: span 0-1 level CPU
> [ 5394.984211]   groups: 1 0
> [ 5395.372669] wlan0: disassociating by local choice (reason=3)
> [ 5395.399323] wlan0: authenticate with AP 00:22:a4:53:be:29
> [ 5395.406692] wlan0: authenticated
> [ 5395.406706] wlan0: associate with AP 00:22:a4:53:be:29
> [ 5395.410065] wlan0: RX AssocResp from 00:22:a4:53:be:29 (capab=0x431 status=0 aid=2)
> [ 5395.410074] wlan0: associated
> [ 5395.418113] wlan0: disassociating by local choice (reason=3)
> [ 5395.760388] [drm] Num pipes: 1
> [ 5396.557122] PM: Syncing filesystems ... done.
> [ 5396.674072] PM: Preparing system for mem sleep
> [ 5396.674077] Freezing user space processes ... (elapsed 0.00 seconds) done.
> [ 5396.675120] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> [ 5396.675205] PM: Entering mem sleep
> [ 5396.675228] Suspending console(s) (use no_console_suspend to debug)
> [ 5397.204464] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 5397.204544] sd 0:0:0:0: [sda] Stopping disk
> [ 5397.684967] ath5k_pci 0000:04:00.0: PCI INT A disabled
> [ 5397.700080] ACPI handle has no context!
> [ 5397.700085] ACPI handle has no context!
> [ 5397.716041] HDA Intel 0000:00:14.2: PCI INT A disabled
> [ 5397.732108] pata_atiixp 0000:00:14.1: PCI INT A disabled
> [ 5397.732192] ehci_hcd 0000:00:13.5: PCI INT D disabled
> [ 5397.748085] ehci_hcd 0000:00:13.5: power state changed by ACPI to D3
> [ 5397.748125] ohci_hcd 0000:00:13.4: PCI INT C disabled
> [ 5397.748160] ohci_hcd 0000:00:13.3: PCI INT B disabled
> [ 5397.748194] ohci_hcd 0000:00:13.2: PCI INT C disabled
> [ 5397.748228] ohci_hcd 0000:00:13.1: PCI INT B disabled
> [ 5397.748262] ohci_hcd 0000:00:13.0: PCI INT A disabled
> [ 5397.812144] ahci 0000:00:12.0: PCI INT A disabled
> [ 5397.812354] PM: suspend devices took 1.140 seconds
> [ 5397.822013] ACPI: Preparing to enter system sleep state S3
> [ 5397.827486] Disabling non-boot CPUs ...
> [ 5397.829840] CPU 1 is now offline
> [ 5397.829843] SMP alternatives: switching to UP code
> [ 5397.991101] CPU0 attaching NULL sched-domain.
> [ 5397.991105] CPU1 attaching NULL sched-domain.
> [ 5397.996467] CPU0 attaching NULL sched-domain.
> [ 5397.996702] CPU1 is down
> [ 5397.996702] Back to C!
> [ 5397.996702] ahci 0000:00:12.0: set SATA to AHCI mode
> [ 5397.996702] Enabling non-boot CPUs ...
> [ 5397.996702] SMP alternatives: switching to SMP code
> [ 5398.158161] Booting processor 1 APIC 0x1 ip 0x6000
> [ 5397.990928] Initializing CPU#1
> [ 5397.990928] Calibrating delay using timer specific routine.. 4002.08 BogoMIPS (lpj=8004175)
> [ 5397.990928] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 5397.990928] CPU: L2 Cache: 512K (64 bytes/line)
> [ 5397.990928] CPU: Physical Processor ID: 0
> [ 5397.990928] CPU: Processor Core ID: 1
> [ 5398.248149] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> [ 5398.248216] CPU0 attaching NULL sched-domain.
> [ 5398.248245] Switch to broadcast mode on CPU1
> [ 5398.248535] Switched to high resolution mode on CPU 1
> [ 5398.265267] CPU0 attaching sched-domain:
> [ 5398.265270]  domain 0: span 0-1 level CPU
> [ 5398.265272]   groups: 0 1
> [ 5398.265277] CPU1 attaching sched-domain:
> [ 5398.265279]  domain 0: span 0-1 level CPU
> [ 5398.265280]   groups: 1 0
> [ 5398.268024] CPU1 is up
> [ 5398.268027] ACPI: Waking up from system sleep state S3
> [ 5398.362639] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5398.362657] pcieport-driver 0000:00:04.0: setting latency timer to 64
> [ 5398.362672] pcieport-driver 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5398.362686] pcieport-driver 0000:00:05.0: setting latency timer to 64
> [ 5398.362700] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5398.362714] pcieport-driver 0000:00:06.0: setting latency timer to 64
> [ 5398.362746] ahci 0000:00:12.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300007)
> [ 5398.362761] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 5398.362838] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5398.369563] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 5398.384033] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5398.408029] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5398.432028] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5398.456028] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5398.480093] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
> [ 5398.496030] ehci_hcd 0000:00:13.5: enabling device (0000 -> 0002)
> [ 5398.496034] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 5398.496066] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00006, writing 0x2b00117)
> [ 5398.496133] pata_atiixp 0000:00:14.1: restoring config space at offset 0x1 (was 0x2200011, writing 0x2200015)
> [ 5398.496142] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5398.512054] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
> [ 5398.512066] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5398.512175] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5398.512211] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
> [ 5398.512276] ath5k_pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
> [ 5398.528029] ath5k_pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 5398.528132] sd 0:0:0:0: [sda] Starting disk
> [ 5398.677006] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> [ 5398.677009] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
> [ 5398.680556] ata2: SATA link down (SStatus 0 SControl 300)
> [ 5398.680581] ata3: SATA link down (SStatus 0 SControl 300)
> [ 5398.680605] ata4: SATA link down (SStatus 0 SControl 300)
> [ 5398.724959] ata5.00: configured for UDMA/33
> [ 5399.628532] ata1: softreset failed (device not ready)
> [ 5399.628535] ata1: failed due to HW bug, retry pmp=0
> [ 5399.792542] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5399.793293] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5399.794145] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> [ 5399.794147] ata1.00: configured for UDMA/100
> [ 5399.808070] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> [ 5399.808088] sd 0:0:0:0: [sda] Write Protect is off
> [ 5399.808090] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5399.808114] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5400.024027] usb 1-10: reset high speed USB device using ehci_hcd and address 2
> [ 5400.169075] PM: resume devices took 1.832 seconds
> [ 5400.169138] PM: Finishing wakeup.
> [ 5400.169140] Restarting tasks ... done.
> [ 5400.228620] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
> [ 5401.359816] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
> [ 5401.900867] r8169: eth0: link down
> [ 5401.901762] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 5401.950333] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 5402.006745] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5402.061163] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 1
> [ 5402.260032] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 2
> [ 5402.464058] wlan0: direct probe to AP 00:1c:df:3a:14:f5 try 3
> [ 5402.469972] wlan0 direct probe responded
> [ 5402.469980] wlan0: authenticate with AP 00:1c:df:3a:14:f5
> [ 5402.473376] wlan0: authenticated
> [ 5402.473383] wlan0: associate with AP 00:1c:df:3a:14:f5
> [ 5402.476726] wlan0: RX AssocResp from 00:1c:df:3a:14:f5 (capab=0x421 status=0 aid=1)
> [ 5402.476732] wlan0: associated
> [ 5402.479158] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 5402.479503] wlan0: disassociating by local choice (reason=3)
> [ 5402.692922] [drm] Loading RS690/RS740 Microcode
> [ 5402.692954] [drm] Num pipes: 1
> [ 5406.103290] wlan0: authenticate with AP 00:22:a4:53:be:29
> [ 5406.106670] wlan0: authenticated
> [ 5406.106684] wlan0: associate with AP 00:22:a4:53:be:29
> [ 5406.109077] wlan0: RX AssocResp from 00:22:a4:53:be:29 (capab=0x431 status=0 aid=2)
> [ 5406.109086] wlan0: associated
> [ 5406.508738] CPU0 attaching NULL sched-domain.
> [ 5406.508759] CPU1 attaching NULL sched-domain.
> [ 5406.520677] CPU0 attaching sched-domain:
> [ 5406.520686]  domain 0: span 0-1 level CPU
> [ 5406.520692]   groups: 0 1
> [ 5406.520704] CPU1 attaching sched-domain:
> [ 5406.520708]  domain 0: span 0-1 level CPU
> [ 5406.520713]   groups: 1 0
^---
wait for 60 seconds