[ 0.000000] BIOS EBDA/lowmem at: 0009f400/0009f400 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002ff40000 (usable) [ 0.000000] BIOS-e820: 000000002ff40000 - 000000002ff50000 (ACPI data) [ 0.000000] BIOS-e820: 000000002ff50000 - 0000000030000000 (ACPI NVS) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x2ff40 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002ff40000 (usable) [ 0.000000] modified: 000000002ff40000 - 000000002ff50000 (ACPI data) [ 0.000000] modified: 000000002ff50000 - 0000000030000000 (ACPI NVS) [ 0.000000] kernel direct mapping tables up to 2ff40000 @ 10000-16000 [ 0.000000] RAMDISK: 2f7fe000 - 2ff2ff1a [ 0.000000] ACPI: RSDP 000F6CC0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 2FF40000, 002C (r1 A M I OEMRSDT 9000210 MSFT 97) [ 0.000000] ACPI: FACP 2FF40200, 0081 (r2 A M I OEMFACP 9000210 MSFT 97) [ 0.000000] ACPI: DSDT 2FF40400, 39D5 (r1 DELL DIM 4500 10A MSFT 100000D) [ 0.000000] ACPI: FACS 2FF50000, 0040 [ 0.000000] ACPI: APIC 2FF40300, 0054 (r1 A M I OEMAPIC 9000210 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 767MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2ff40000 [ 0.000000] low ram: 00000000 - 2ff40000 [ 0.000000] bootmap 00012000 - 00017fe8 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002ff40000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [002f7fe000 - 002ff2ff1a] RAMDISK ==> [002f7fe000 - 002ff2ff1a] [ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #6 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000018000] BOOTMAP ==> [0000012000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002ff40 [ 0.000000] HighMem 0x0002ff40 -> 0x0002ff40 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0002ff40 [ 0.000000] On node 0 totalpages: 196293 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 1503 pages used for memmap [ 0.000000] Normal zone: 190817 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:d0000000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194758 [ 0.000000] Kernel command line: root=UUID=31f600b5-6375-48a2-ba00-5437946b5415 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 2525.181 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 3928320 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 759016k/785664k available (4126k kernel code, 25924k reserved, 2208k data, 532k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf0740000 - 0xff3fe000 ( 236 MB) [ 0.004000] lowmem : 0xc0000000 - 0xeff40000 ( 767 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 5050.36 BogoMIPS (lpj=10100724) [ 0.004037] Security Framework initialized [ 0.004047] SELinux: Disabled at boot. [ 0.004070] AppArmor: AppArmor initialized [ 0.004085] Mount-cache hash table entries: 512 [ 0.004261] Initializing cgroup subsys ns [ 0.004267] Initializing cgroup subsys cpuacct [ 0.004272] Initializing cgroup subsys memory [ 0.004278] Initializing cgroup subsys freezer [ 0.004300] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004305] CPU: L2 cache: 512K [ 0.004310] CPU: Hyper-Threading is disabled [ 0.004330] Checking 'hlt' instruction... OK. [ 0.020982] SMP alternatives: switching to UP code [ 0.136467] Freeing SMP alternatives: 18k freed [ 0.136473] ACPI: Core revision 20080926 [ 0.138648] ACPI: Checking initramfs for custom DSDT [ 0.491431] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.531122] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 04 [ 0.532002] Brought up 1 CPUs [ 0.532002] Total of 1 processors activated (5050.36 BogoMIPS). [ 0.532002] CPU0 attaching NULL sched-domain. [ 0.532002] net_namespace: 776 bytes [ 0.532002] Booting paravirtualized kernel on bare hardware [ 0.532002] Time: 18:06:59 Date: 05/19/09 [ 0.532002] regulator: core version 0.5 [ 0.532002] NET: Registered protocol family 16 [ 0.532002] EISA bus registered [ 0.532002] ACPI: bus type pci registered [ 0.532002] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.532002] PCI: Using configuration type 1 for base access [ 0.532002] ACPI: EC: Look up EC in DSDT [ 0.539614] ACPI: Interpreter enabled [ 0.539624] ACPI: (supports S0 S1 S3 S4 S5) [ 0.539651] ACPI: Using IOAPIC for interrupt routing [ 0.546472] ACPI: No dock devices found. [ 0.546486] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.546551] pci 0000:00:00.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff] [ 0.546668] pci 0000:00:1d.0: reg 20 io port: [0xe800-0xe81f] [ 0.546722] pci 0000:00:1d.1: reg 20 io port: [0xe880-0xe89f] [ 0.546776] pci 0000:00:1d.2: reg 20 io port: [0xec00-0xec1f] [ 0.546838] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff] [ 0.546884] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.546890] pci 0000:00:1d.7: PME# disabled [ 0.546939] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.546941] * this clock source is slow. If you are sure your timer does not have [ 0.546942] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.546983] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.546992] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 0.546996] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO [ 0.547019] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.547028] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.547035] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.547042] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.547050] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.547057] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.547108] pci 0000:00:1f.3: reg 20 io port: [0xe480-0xe49f] [ 0.547168] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.547176] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff] [ 0.547183] pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfcffffff] [ 0.547204] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe6e0000-0xfe6fffff] [ 0.547253] pci 0000:00:01.0: bridge 32bit mmio: [0xfa600000-0xfe6fffff] [ 0.547257] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd2300000-0xf23fffff] [ 0.547292] pci 0000:02:00.0: reg 10 io port: [0xd000-0xd0ff] [ 0.547300] pci 0000:02:00.0: reg 14 32bit mmio: [0xfeaff800-0xfeaff8ff] [ 0.547333] pci 0000:02:00.0: supports D1 D2 [ 0.547335] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.547340] pci 0000:02:00.0: PME# disabled [ 0.547371] pci 0000:02:01.0: reg 10 32bit mmio: [0xfeafe000-0xfeafefff] [ 0.547378] pci 0000:02:01.0: reg 14 io port: [0xdf00-0xdf0f] [ 0.547409] pci 0000:02:01.0: supports D1 D2 [ 0.547411] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.547416] pci 0000:02:01.0: PME# disabled [ 0.547448] pci 0000:02:02.0: reg 10 32bit mmio: [0xfeafd000-0xfeafdfff] [ 0.547455] pci 0000:02:02.0: reg 14 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.547487] pci 0000:02:02.0: supports D1 D2 [ 0.547532] pci 0000:02:0c.0: reg 10 io port: [0xdc00-0xdc07] [ 0.547539] pci 0000:02:0c.0: reg 14 io port: [0xd880-0xd883] [ 0.547546] pci 0000:02:0c.0: reg 18 io port: [0xd800-0xd807] [ 0.547553] pci 0000:02:0c.0: reg 1c io port: [0xd480-0xd483] [ 0.547561] pci 0000:02:0c.0: reg 20 io port: [0xd400-0xd40f] [ 0.547568] pci 0000:02:0c.0: reg 24 32bit mmio: [0xfeaffc00-0xfeaffdff] [ 0.547575] pci 0000:02:0c.0: reg 30 32bit mmio: [0xfea00000-0xfea7ffff] [ 0.547585] pci 0000:02:0c.0: supports D1 D2 [ 0.547614] pci 0000:00:1e.0: transparent bridge [ 0.547619] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.547624] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe700000-0xfeafffff] [ 0.547630] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf2400000-0xf24fffff] [ 0.547642] bus 00 -> node 0 [ 0.547650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.547838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.549443] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.549637] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.549831] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.550027] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.550220] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.550421] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.550615] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.550809] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.550947] ACPI: Power Resource [URP1] (off) [ 0.550992] ACPI: Power Resource [FDDP] (off) [ 0.551037] ACPI: Power Resource [LPTP] (off) [ 0.551134] ACPI: WMI: Mapper loaded [ 0.551426] SCSI subsystem initialized [ 0.551478] libata version 3.00 loaded. [ 0.551548] usbcore: registered new interface driver usbfs [ 0.551575] usbcore: registered new interface driver hub [ 0.551611] usbcore: registered new device driver usb [ 0.551776] PCI: Using ACPI for IRQ routing [ 0.551899] Bluetooth: Core ver 2.13 [ 0.551899] NET: Registered protocol family 31 [ 0.551899] Bluetooth: HCI device and connection manager initialized [ 0.552009] Bluetooth: HCI socket layer initialized [ 0.552013] NET: Registered protocol family 8 [ 0.552015] NET: Registered protocol family 20 [ 0.552030] NetLabel: Initializing [ 0.552033] NetLabel: domain hash size = 128 [ 0.552035] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.552053] NetLabel: unlabeled traffic allowed by default [ 0.552164] AppArmor: AppArmor Filesystem Enabled [ 0.552175] pnp: PnP ACPI init [ 0.552175] ACPI: bus type pnp registered [ 0.557073] pnp: PnP ACPI: found 13 devices [ 0.557077] ACPI: ACPI bus type pnp unregistered [ 0.557083] PnPBIOS: Disabled by ACPI PNP [ 0.557100] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.557109] system 00:0b: ioport range 0x400-0x47f has been reserved [ 0.557113] system 00:0b: ioport range 0x680-0x6ff has been reserved [ 0.557116] system 00:0b: ioport range 0x480-0x4bf has been reserved [ 0.557120] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.557123] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.557131] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.557135] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved [ 0.557138] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.557141] system 00:0c: iomem range 0x100000-0x2fffffff could not be reserved [ 0.591939] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.591942] pci 0000:00:01.0: IO window: disabled [ 0.591947] pci 0000:00:01.0: MEM window: 0xfa600000-0xfe6fffff [ 0.591951] pci 0000:00:01.0: PREFETCH window: 0x000000d2300000-0x000000f23fffff [ 0.591958] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.591962] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.591968] pci 0000:00:1e.0: MEM window: 0xfe700000-0xfeafffff [ 0.591973] pci 0000:00:1e.0: PREFETCH window: 0x000000f2400000-0x000000f24fffff [ 0.591992] pci 0000:00:1e.0: setting latency timer to 64 [ 0.592005] bus: 00 index 0 io port: [0x00-0xffff] [ 0.592008] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.592011] bus: 01 index 0 mmio: [0x0-0x0] [ 0.592013] bus: 01 index 1 mmio: [0xfa600000-0xfe6fffff] [ 0.592016] bus: 01 index 2 mmio: [0xd2300000-0xf23fffff] [ 0.592019] bus: 01 index 3 mmio: [0x0-0x0] [ 0.592021] bus: 02 index 0 io port: [0xd000-0xdfff] [ 0.592024] bus: 02 index 1 mmio: [0xfe700000-0xfeafffff] [ 0.592027] bus: 02 index 2 mmio: [0xf2400000-0xf24fffff] [ 0.592029] bus: 02 index 3 io port: [0x00-0xffff] [ 0.592031] bus: 02 index 4 mmio: [0x000000-0xffffffff] [ 0.592044] NET: Registered protocol family 2 [ 0.592209] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.592681] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.594161] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.595108] TCP: Hash tables configured (established 131072 bind 65536) [ 0.595114] TCP reno registered [ 0.595380] NET: Registered protocol family 1 [ 0.595585] checking if image is initramfs... it is [ 1.092056] Switched to high resolution mode on CPU 0 [ 1.331262] Freeing initrd memory: 7367k freed [ 1.331371] cpufreq: No nForce2 chipset. [ 1.331608] audit: initializing netlink socket (disabled) [ 1.331639] type=2000 audit(1242756419.328:1): initialized [ 1.339445] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.340976] VFS: Disk quotas dquot_6.5.1 [ 1.341056] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.341865] fuse init (API version 7.10) [ 1.341969] msgmni has been set to 1497 [ 1.342229] alg: No test for stdrng (krng) [ 1.342246] io scheduler noop registered [ 1.342249] io scheduler anticipatory registered [ 1.342251] io scheduler deadline registered [ 1.342277] io scheduler cfq registered (default) [ 1.342391] pci 0000:01:00.0: Boot video device [ 1.345616] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.345630] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.345804] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.345808] ACPI: Power Button (FF) [PWRF] [ 1.345869] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.345878] ACPI: Sleep Button (CM) [SLPB] [ 1.346075] processor ACPI_CPU:00: registered as cooling_device0 [ 1.346080] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.347994] isapnp: Scanning for PnP cards... [ 1.701788] isapnp: No Plug & Play device found [ 1.703615] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.703715] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.704094] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.704293] serial 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.705301] brd: module loaded [ 1.705755] loop: module loaded [ 1.705875] Fixed MDIO Bus: probed [ 1.705884] PPP generic driver version 2.4.2 [ 1.705968] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.706014] Driver 'sd' needs updating - please use bus_type methods [ 1.706027] Driver 'sr' needs updating - please use bus_type methods [ 1.706122] ata_piix 0000:00:1f.1: version 2.12 [ 1.706137] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.706150] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.706225] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.706390] scsi0 : ata_piix [ 1.706523] scsi1 : ata_piix [ 1.708909] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.708913] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.888968] ata1.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133 [ 1.888972] ata1.00: 976773168 sectors, multi 16: LBA48 [ 1.889991] ata1.01: ATA-6: WDC WD800BB-00DKA0, 77.07W77, max UDMA/100 [ 1.889994] ata1.01: 156301488 sectors, multi 16: LBA48 [ 1.905148] ata1.00: configured for UDMA/100 [ 1.921228] ata1.01: configured for UDMA/100 [ 2.148299] ata2.00: ATAPI: PIONEER DVR-113NP, 1.00, max UDMA/66 [ 2.148572] ata2.01: ATA-6: ST3200822A, 3.01, max UDMA/100 [ 2.148575] ata2.01: 390721968 sectors, multi 16: LBA48 [ 2.164254] ata2.00: configured for UDMA/66 [ 2.180449] ata2.01: configured for UDMA/100 [ 2.180810] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 05.0 PQ: 0 ANSI: 5 [ 2.180952] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 2.180974] sd 0:0:0:0: [sda] Write Protect is off [ 2.180977] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.181009] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.181100] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 2.181118] sd 0:0:0:0: [sda] Write Protect is off [ 2.181121] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.181152] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.181157] sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > [ 2.222478] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.222557] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.222666] scsi 0:0:1:0: Direct-Access ATA WDC WD800BB-00DK 77.0 PQ: 0 ANSI: 5 [ 2.222777] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 2.222797] sd 0:0:1:0: [sdb] Write Protect is off [ 2.222800] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.222831] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.222907] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 2.222926] sd 0:0:1:0: [sdb] Write Protect is off [ 2.222929] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.222960] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.222965] sdb: sdb1 sdb2 [ 2.240584] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.240640] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 2.241167] scsi 1:0:0:0: CD-ROM PIONEER DVR-113NP 1.00 PQ: 0 ANSI: 5 [ 2.244420] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.244425] Uniform CD-ROM driver Revision: 3.20 [ 2.244563] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.244622] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 2.244721] scsi 1:0:1:0: Direct-Access ATA ST3200822A 3.01 PQ: 0 ANSI: 5 [ 2.244830] sd 1:0:1:0: [sdc] 390721968 512-byte hardware sectors: (200 GB/186 GiB) [ 2.244850] sd 1:0:1:0: [sdc] Write Protect is off [ 2.244853] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.244885] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.244960] sd 1:0:1:0: [sdc] 390721968 512-byte hardware sectors: (200 GB/186 GiB) [ 2.244978] sd 1:0:1:0: [sdc] Write Protect is off [ 2.244981] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.245012] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.245017] sdc: sdc1 sdc2 sdc3 sdc4 [ 2.271166] sd 1:0:1:0: [sdc] Attached SCSI disk [ 2.271226] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 2.271310] sata_sil 0000:02:0c.0: version 2.3 [ 2.271371] sata_sil 0000:02:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.271521] scsi2 : sata_sil [ 2.271604] scsi3 : sata_sil [ 2.271655] ata3: SATA max UDMA/100 mmio m512@0xfeaffc00 tf 0xfeaffc80 irq 17 [ 2.271659] ata4: SATA max UDMA/100 mmio m512@0xfeaffc00 tf 0xfeaffcc0 irq 17 [ 2.588036] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.732322] ata3.00: ATA-6: WD My Book, 01.01A01, max UDMA/133 [ 2.732326] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/1) [ 2.916339] ata3.00: configured for UDMA/100 [ 3.236019] ata4: SATA link down (SStatus 0 SControl 310) [ 3.236149] scsi 2:0:0:0: Direct-Access ATA WD My Book 01.0 PQ: 0 ANSI: 5 [ 3.236278] sd 2:0:0:0: [sdd] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 3.236299] sd 2:0:0:0: [sdd] Write Protect is off [ 3.236302] sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.236334] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.236429] sd 2:0:0:0: [sdd] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 3.236447] sd 2:0:0:0: [sdd] Write Protect is off [ 3.236450] sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.236480] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.236485] sdd:<3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 33.816031] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 33.816033] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 33.816175] ata3.00: status: { DRDY } [ 33.816240] ata3: hard resetting link [ 34.864026] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 35.184339] ata3.00: configured for UDMA/100 [ 35.184350] ata3: EH complete [ 36.373691] sdd1 sdd2 sdd3 < sdd5 > [ 36.374695] sd 2:0:0:0: [sdd] Attached SCSI disk [ 36.374774] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 36.375545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 36.375584] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 36.375610] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 36.375615] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 36.375694] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 36.379620] ehci_hcd 0000:00:1d.7: debug port 1 [ 36.379628] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 36.379646] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00 [ 36.392011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 36.392108] usb usb1: configuration #1 chosen from 1 choice [ 36.392150] hub 1-0:1.0: USB hub found [ 36.392163] hub 1-0:1.0: 6 ports detected [ 36.392309] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 36.392334] uhci_hcd: USB Universal Host Controller Interface driver [ 36.392394] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 36.392405] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 36.392408] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 36.392473] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 36.392504] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800 [ 36.392607] usb usb2: configuration #1 chosen from 1 choice [ 36.392640] hub 2-0:1.0: USB hub found [ 36.392650] hub 2-0:1.0: 2 ports detected [ 36.392753] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 36.392760] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 36.392764] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 36.392816] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 36.392846] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880 [ 36.392941] usb usb3: configuration #1 chosen from 1 choice [ 36.392973] hub 3-0:1.0: USB hub found [ 36.392998] hub 3-0:1.0: 2 ports detected [ 36.393107] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 36.393115] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 36.393119] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 36.393183] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 36.393213] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 36.393314] usb usb4: configuration #1 chosen from 1 choice [ 36.393346] hub 4-0:1.0: USB hub found [ 36.393359] hub 4-0:1.0: 2 ports detected [ 36.393510] usbcore: registered new interface driver libusual [ 36.393561] usbcore: registered new interface driver usbserial [ 36.393576] USB Serial support registered for generic [ 36.393596] usbcore: registered new interface driver usbserial_generic [ 36.393599] usbserial: USB Serial Driver core [ 36.393661] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 36.393664] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 36.394183] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 36.394337] mice: PS/2 mouse device common for all mice [ 36.394504] rtc_cmos 00:02: RTC can wake from S4 [ 36.394557] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 36.394581] rtc0: alarms up to one month, 114 bytes nvram [ 36.394682] device-mapper: uevent: version 1.0.3 [ 36.394852] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 36.394912] device-mapper: multipath: version 1.0.5 loaded [ 36.394916] device-mapper: multipath round-robin: version 1.0.0 loaded [ 36.395028] EISA: Probing bus 0 at eisa.0 [ 36.395067] EISA: Detected 0 cards. [ 36.395108] cpuidle: using governor ladder [ 36.395111] cpuidle: using governor menu [ 36.395734] TCP cubic registered [ 36.395832] NET: Registered protocol family 10 [ 36.396356] lo: Disabled Privacy Extensions [ 36.396733] NET: Registered protocol family 17 [ 36.396758] Bluetooth: L2CAP ver 2.11 [ 36.396760] Bluetooth: L2CAP socket layer initialized [ 36.396764] Bluetooth: SCO (Voice Link) ver 0.6 [ 36.396766] Bluetooth: SCO socket layer initialized [ 36.396814] Bluetooth: RFCOMM socket layer initialized [ 36.396825] Bluetooth: RFCOMM TTY layer initialized [ 36.396827] Bluetooth: RFCOMM ver 1.10 [ 36.396893] Using IPI No-Shortcut mode [ 36.397022] registered taskstats version 1 [ 36.397177] Magic number: 9:395:140 [ 36.397216] block ram5: hash matches [ 36.397249] acpi device:11: hash matches [ 36.397290] rtc_cmos 00:02: setting system clock to 2009-05-19 18:07:35 UTC (1242756455) [ 36.397293] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 36.397296] EDD information not available. [ 36.398186] Freeing unused kernel memory: 532k freed [ 36.398313] Write protecting the kernel text: 4128k [ 36.398357] Write protecting the kernel read-only data: 1532k [ 36.438076] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 36.958119] Floppy drive(s): fd0 is 1.44M [ 36.977673] FDC 0 is a post-1991 82077 [ 37.101610] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 37.101655] 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 37.105245] 8139too Fast Ethernet driver 0.9.28 [ 37.105318] 8139too 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 37.106440] eth0: RealTek RTL8139 at 0xd000, 00:c0:a8:84:c5:65, IRQ 21 [ 37.106443] eth0: Identified 8139 chip type 'RTL-8139C' [ 37.106601] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 37.337691] usb 2-2: configuration #1 chosen from 1 choice [ 37.580092] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 37.754802] usb 3-1: configuration #1 chosen from 1 choice [ 37.767902] usbcore: registered new interface driver hiddev [ 37.787263] input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4 [ 37.787756] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1/input0 [ 37.787784] usbcore: registered new interface driver usbhid [ 37.787789] usbhid: v2.6:USB HID core driver [ 38.175226] PM: Starting manual resume from disk [ 38.175231] PM: Resume from partition 8:34 [ 38.175233] PM: Checking hibernation image. [ 38.175464] PM: Resume from disk failed. [ 38.178964] EXT4-fs: INFO: recovery required on readonly filesystem. [ 38.178969] EXT4-fs: write access will be enabled during recovery. [ 38.191437] EXT4-fs: barriers enabled [ 38.461277] kjournald2 starting. Commit interval 5 seconds [ 38.461301] EXT4-fs: delayed allocation enabled [ 38.461304] EXT4-fs: file extents enabled [ 38.461712] EXT4-fs: mballoc enabled [ 38.461716] EXT4-fs: recovery complete. [ 38.462231] EXT4-fs: mounted filesystem with ordered data mode. [ 39.684048] udev: starting version 141 [ 39.837125] parport_pc 00:07: reported by Plug and Play ACPI [ 39.837153] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 39.868646] Linux agpgart interface v0.103 [ 39.910012] agpgart-intel 0000:00:00.0: Intel 845G Chipset [ 39.913447] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000 [ 39.917144] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 39.926778] Linux video capture interface: v2.00 [ 39.949733] pwc: Philips webcam module version 10.0.13 loaded. [ 39.949738] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [ 39.949741] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [ 39.949745] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [ 39.949778] pwc: Logitech QuickCam 4000 Pro USB webcam detected. [ 39.949907] pwc: Registered as /dev/video0. [ 39.953075] usbcore: registered new interface driver Philips webcam [ 40.380681] nvidia: module license 'NVIDIA' taints kernel. [ 40.708271] intel_rng: Firmware space is locked read-only. If you can't or [ 40.708274] intel_rng: don't want to disable this in firmware setup, and if [ 40.708276] intel_rng: you are certain that your system has a functional [ 40.708277] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 40.729283] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 40.768483] iTCO_vendor_support: vendor-support=0 [ 40.915193] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 40.915350] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460) [ 40.915464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 41.062805] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 41.063674] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009 [ 41.326398] ppdev: user-space parallel port driver [ 41.354890] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 41.533517] Sound Fusion CS46xx 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 41.678415] usbcore: registered new interface driver snd-usb-audio [ 44.290182] gameport: CS46xx Gameport is pci0000:02:02.0/gameport0, speed 1242kHz [ 44.464083] lp0: using parport0 (interrupt-driven). [ 44.596349] Adding 33913204k swap on /dev/sdc2. Priority:-1 extents:1 across:33913204k [ 45.150319] EXT4 FS on sda10, internal journal on sda10:8 [ 54.616780] EXT4-fs: barriers enabled [ 54.628745] kjournald2 starting. Commit interval 5 seconds [ 54.629120] EXT4 FS on sda2, internal journal on sda2:8 [ 54.629123] EXT4-fs: delayed allocation enabled [ 54.629125] EXT4-fs: file extents enabled [ 54.638477] EXT4-fs: mballoc enabled [ 54.638484] EXT4-fs: mounted filesystem with ordered data mode. [ 54.686112] EXT4-fs: barriers enabled [ 54.693914] kjournald2 starting. Commit interval 5 seconds [ 54.694303] EXT4 FS on sda11, internal journal on sda11:8 [ 54.694306] EXT4-fs: delayed allocation enabled [ 54.694308] EXT4-fs: file extents enabled [ 54.707105] EXT4-fs: mballoc enabled [ 54.707112] EXT4-fs: mounted filesystem with ordered data mode. [ 54.731962] EXT4-fs: barriers enabled [ 54.738270] kjournald2 starting. Commit interval 5 seconds [ 54.738531] EXT4 FS on sda8, internal journal on sda8:8 [ 54.738534] EXT4-fs: delayed allocation enabled [ 54.738536] EXT4-fs: file extents enabled [ 54.739120] EXT4-fs: mballoc enabled [ 54.739126] EXT4-fs: mounted filesystem with ordered data mode. [ 54.760784] EXT4-fs: barriers enabled [ 54.767841] kjournald2 starting. Commit interval 5 seconds [ 54.768152] EXT4 FS on sda9, internal journal on sda9:8 [ 54.768155] EXT4-fs: delayed allocation enabled [ 54.768157] EXT4-fs: file extents enabled [ 54.768351] EXT4-fs: mballoc enabled [ 54.768358] EXT4-fs: mounted filesystem with ordered data mode. [ 54.799129] kjournald starting. Commit interval 5 seconds [ 54.799457] EXT3 FS on sda7, internal journal [ 54.799464] EXT3-fs: mounted filesystem with ordered data mode. [ 55.799519] type=1505 audit(1242781674.898:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2353 [ 55.862406] type=1505 audit(1242781674.962:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2357 [ 55.862716] type=1505 audit(1242781674.962:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2357 [ 55.862809] type=1505 audit(1242781674.962:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2357 [ 55.862870] type=1505 audit(1242781674.962:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2357 [ 55.917572] type=1505 audit(1242781675.018:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2362 [ 56.090175] type=1505 audit(1242781675.190:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2366 [ 56.090601] type=1505 audit(1242781675.190:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2366 [ 56.130784] type=1505 audit(1242781675.230:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2370 [ 62.908617] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 62.908623] Bluetooth: BNEP filters: protocol multicast [ 62.931123] Bridge firewalling registered [ 64.911150] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 64.911169] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 64.911201] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode [ 67.897580] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 78.284008] eth0: no IPv6 routers present