[ 0.000000] BIOS EBDA/lowmem at: 0009b400/0009b400 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-12-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #43-Ubuntu SMP Fri May 1 19:27:06 UTC 2009 (Ubuntu 2.6.28-12.43-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable) [ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable) [ 0.000000] BIOS-e820: 000000007fe90000 - 000000007fe9a000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fe9a000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7fe90 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000008e400 (usable) [ 0.000000] modified: 000000000009b400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fe90000 (usable) [ 0.000000] modified: 000000007fe90000 - 000000007fe9a000 (ACPI NVS) [ 0.000000] modified: 000000007fe9a000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378b9000 - 37fef15c [ 0.000000] Allocated new RAMDISK: 0087b000 - 00fb115c [ 0.000000] Move RAMDISK from 00000000378b9000 - 0000000037fef15b to 0087b000 - 00fb115b [ 0.000000] ACPI: RSDP 000F62A0, 0024 (r2 ACRSYS) [ 0.000000] ACPI: XSDT 7FE91B8C, 0064 (r1 ACRSYS ACRPRDCT 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FE98C2A, 00F4 (r3 ACRSYS ACRPRDCT 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7FE925C0, 65F6 (r1 ACRSYS ACRPRDCT 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 7FE99FC0, 0040 [ 0.000000] ACPI: APIC 7FE98D1E, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7FE98D86, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7FE98DBE, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 7FE98DFA, 0068 (r1 ACRSYS ACRPRDCT 6040000 LTP 0) [ 0.000000] ACPI: SLIC 7FE98E62, 0176 (r1 ACRSYS ACRPRDCT 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FE98FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 7FE91BF0, 0500 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1162MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac] [ 0.000000] #4 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000] [ 0.000000] #5 [000009b400 - 0000100000] BIOS reserved ==> [000009b400 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087b000 - 0000fb115c] NEW RAMDISK ==> [000087b000 - 0000fb115c] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f6370] 000f6370 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0007fe90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x0000008e [ 0.000000] 0: 0x00000100 -> 0x0007fe90 [ 0.000000] On node 0 totalpages: 523793 [ 0.000000] free_area_init_node: node 0, pgdat c06c9500, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3937 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2326 pages used for memmap [ 0.000000] HighMem zone: 295292 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000008e000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519699 [ 0.000000] Kernel command line: root=UUID=df23e5ca-01e3-4fc4-83f5-76c21fc8fc4d ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.929 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 10478400 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 2051624k/2095680k available (4110k kernel code, 42624k reserved, 2197k data, 532k init, 1190472k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB) [ 0.004000] .data : 0xc05039df - 0xc0728e60 (2197 kB) [ 0.004000] .text : 0xc0100000 - 0xc05039df (4110 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.85 BogoMIPS (lpj=7979716) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.020007] ACPI: Core revision 20080926 [ 0.023446] ACPI: Checking initramfs for custom DSDT [ 0.616542] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.659266] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 0.660002] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3989.99 BogoMIPS (lpj=7979985) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.745107] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 0.745133] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.748049] Brought up 2 CPUs [ 0.748054] Total of 2 processors activated (7979.85 BogoMIPS). [ 0.748125] CPU0 attaching sched-domain: [ 0.748130] domain 0: span 0-1 level MC [ 0.748134] groups: 0 1 [ 0.748145] CPU1 attaching sched-domain: [ 0.748149] domain 0: span 0-1 level MC [ 0.748154] groups: 1 0 [ 0.748270] net_namespace: 776 bytes [ 0.748270] Booting paravirtualized kernel on bare hardware [ 0.748573] Time: 20:38:27 Date: 05/07/09 [ 0.748573] regulator: core version 0.5 [ 0.748573] NET: Registered protocol family 16 [ 0.748573] EISA bus registered [ 0.748573] ACPI: bus type pci registered [ 0.748573] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.748573] PCI: MCFG area at e0000000 reserved in E820 [ 0.748573] PCI: Using MMCONFIG for extended config space [ 0.748573] PCI: Using configuration type 1 for base access [ 0.753941] ACPI: EC: Look up EC in DSDT [ 0.765468] ACPI: Interpreter enabled [ 0.765475] ACPI: (supports S0 S3 S4 S5) [ 0.765510] ACPI: Using IOAPIC for interrupt routing [ 0.807843] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.807847] ACPI: EC: driver started in poll mode [ 0.808211] ACPI: No dock devices found. [ 0.808236] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.808402] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.808409] pci 0000:00:01.0: PME# disabled [ 0.808535] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2300000-0xd2303fff] [ 0.808592] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.808599] pci 0000:00:1b.0: PME# disabled [ 0.808690] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.808698] pci 0000:00:1c.0: PME# disabled [ 0.808793] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.808801] pci 0000:00:1c.1: PME# disabled [ 0.808895] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.808903] pci 0000:00:1c.2: PME# disabled [ 0.809000] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.809008] pci 0000:00:1c.3: PME# disabled [ 0.809096] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.809181] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.809266] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.809350] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f] [ 0.809441] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2304000-0xd23043ff] [ 0.809506] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.809515] pci 0000:00:1d.7: PME# disabled [ 0.809721] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.809729] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.809778] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.809790] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.809802] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.809814] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.809826] pci 0000:00:1f.1: reg 20 io port: [0x1880-0x188f] [ 0.809912] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf] [ 0.809924] pci 0000:00:1f.2: reg 14 io port: [0x18ac-0x18af] [ 0.809935] pci 0000:00:1f.2: reg 18 io port: [0x18c0-0x18c7] [ 0.809947] pci 0000:00:1f.2: reg 1c io port: [0x18a8-0x18ab] [ 0.809959] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf] [ 0.809972] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd2304400-0xd23047ff] [ 0.810001] pci 0000:00:1f.2: PME# supported from D3hot [ 0.810008] pci 0000:00:1f.2: PME# disabled [ 0.810093] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] [ 0.810223] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.810253] pci 0000:01:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff] [ 0.810283] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff] [ 0.810300] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] [ 0.810318] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.810440] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.810447] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff] [ 0.810456] pci 0000:00:01.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.810571] pci 0000:02:00.0: reg 10 64bit mmio: [0xcc000000-0xcc003fff] [ 0.810587] pci 0000:02:00.0: reg 18 io port: [0x3000-0x30ff] [ 0.810639] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.810662] pci 0000:02:00.0: supports D1 D2 [ 0.810666] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.810676] pci 0000:02:00.0: PME# disabled [ 0.810765] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.810774] pci 0000:00:1c.0: bridge 32bit mmio: [0xcc000000-0xcdffffff] [ 0.810786] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xc4000000-0xc5ffffff] [ 0.810870] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] [ 0.810878] pci 0000:00:1c.1: bridge 32bit mmio: [0xc8000000-0xc9ffffff] [ 0.810891] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xc0000000-0xc1ffffff] [ 0.810977] pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff] [ 0.810985] pci 0000:00:1c.2: bridge 32bit mmio: [0xca000000-0xcbffffff] [ 0.810997] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xc2000000-0xc3ffffff] [ 0.811200] pci 0000:07:00.0: reg 10 32bit mmio: [0xce000000-0xce000fff] [ 0.811381] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.811396] pci 0000:07:00.0: PME# disabled [ 0.811525] pci 0000:00:1c.3: bridge io port: [0x6000-0x6fff] [ 0.811534] pci 0000:00:1c.3: bridge 32bit mmio: [0xce000000-0xcfffffff] [ 0.811546] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xc6000000-0xc7ffffff] [ 0.811619] pci 0000:09:04.0: reg 10 32bit mmio: [0xd2005000-0xd20057ff] [ 0.811691] pci 0000:09:04.0: supports D1 D2 [ 0.811758] pci 0000:09:06.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.811777] pci 0000:09:06.0: supports D1 D2 [ 0.811781] pci 0000:09:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.811790] pci 0000:09:06.0: PME# disabled [ 0.811854] pci 0000:09:06.1: reg 10 32bit mmio: [0xd2005800-0xd2005fff] [ 0.811868] pci 0000:09:06.1: reg 14 32bit mmio: [0xd2000000-0xd2003fff] [ 0.811933] pci 0000:09:06.1: supports D1 D2 [ 0.811937] pci 0000:09:06.1: PME# supported from D0 D1 D2 D3hot [ 0.811945] pci 0000:09:06.1: PME# disabled [ 0.812016] pci 0000:09:06.2: reg 10 32bit mmio: [0xd2004000-0xd2004fff] [ 0.812089] pci 0000:09:06.2: supports D1 D2 [ 0.812093] pci 0000:09:06.2: PME# supported from D0 D1 D2 D3hot [ 0.812101] pci 0000:09:06.2: PME# disabled [ 0.812162] pci 0000:09:06.3: reg 10 32bit mmio: [0xd2006000-0xd20060ff] [ 0.812234] pci 0000:09:06.3: supports D1 D2 [ 0.812238] pci 0000:09:06.3: PME# supported from D0 D1 D2 D3hot [ 0.812246] pci 0000:09:06.3: PME# disabled [ 0.812327] pci 0000:00:1e.0: transparent bridge [ 0.812340] pci 0000:00:1e.0: bridge 32bit mmio: [0xd2000000-0xd20fffff] [ 0.812429] bus 00 -> node 0 [ 0.812441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.813001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.813272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.813538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.813801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.814063] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.814349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.820455] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.820684] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.820908] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.821131] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.821354] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.821577] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.821800] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.822021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.822254] ACPI: Power Resource [FN00] (off) [ 0.822641] ACPI: WMI: Mapper loaded [ 0.822708] SCSI subsystem initialized [ 0.822708] libata version 3.00 loaded. [ 0.822708] usbcore: registered new interface driver usbfs [ 0.822708] usbcore: registered new interface driver hub [ 0.822708] usbcore: registered new device driver usb [ 0.822708] PCI: Using ACPI for IRQ routing [ 0.828016] Bluetooth: Core ver 2.13 [ 0.828041] NET: Registered protocol family 31 [ 0.828041] Bluetooth: HCI device and connection manager initialized [ 0.828041] Bluetooth: HCI socket layer initialized [ 0.828041] NET: Registered protocol family 8 [ 0.828043] NET: Registered protocol family 20 [ 0.828065] NetLabel: Initializing [ 0.828068] NetLabel: domain hash size = 128 [ 0.828071] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.828097] NetLabel: unlabeled traffic allowed by default [ 0.828122] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.828132] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.832101] AppArmor: AppArmor Filesystem Enabled [ 0.836018] Switched to high resolution mode on CPU 0 [ 0.837185] Switched to high resolution mode on CPU 1 [ 0.840021] pnp: PnP ACPI init [ 0.840036] ACPI: bus type pnp registered [ 0.862701] pnp: PnP ACPI: found 13 devices [ 0.862706] ACPI: ACPI bus type pnp unregistered [ 0.862711] PnPBIOS: Disabled by ACPI PNP [ 0.862728] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.862734] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.862739] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.862745] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.862750] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.862756] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.862761] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.862776] system 00:06: ioport range 0x400-0x401 has been reserved [ 0.862781] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.862786] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.862791] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.862796] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.862801] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.862806] system 00:06: ioport range 0xfe10-0xfe11 has been reserved [ 0.862812] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.897720] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xc0000000-0xbfffffff] [ 0.897727] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.897732] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.897740] pci 0000:00:01.0: MEM window: 0xd0000000-0xd1ffffff [ 0.897747] pci 0000:00:01.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff [ 0.897757] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.897763] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.897773] pci 0000:00:1c.0: MEM window: 0xcc000000-0xcdffffff [ 0.897781] pci 0000:00:1c.0: PREFETCH window: 0x000000c4000000-0x000000c5ffffff [ 0.897793] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.897799] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.897809] pci 0000:00:1c.1: MEM window: 0xc8000000-0xc9ffffff [ 0.897817] pci 0000:00:1c.1: PREFETCH window: 0x000000c0000000-0x000000c1ffffff [ 0.897829] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 [ 0.897835] pci 0000:00:1c.2: IO window: 0x5000-0x5fff [ 0.897844] pci 0000:00:1c.2: MEM window: 0xca000000-0xcbffffff [ 0.897853] pci 0000:00:1c.2: PREFETCH window: 0x000000c2000000-0x000000c3ffffff [ 0.897865] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07 [ 0.897871] pci 0000:00:1c.3: IO window: 0x6000-0x6fff [ 0.897881] pci 0000:00:1c.3: MEM window: 0xce000000-0xcfffffff [ 0.897889] pci 0000:00:1c.3: PREFETCH window: 0x000000c6000000-0x000000c7ffffff [ 0.897911] pci 0000:09:06.0: CardBus bridge, secondary bus 0000:0a [ 0.897915] pci 0000:09:06.0: IO window: 0x007000-0x0070ff [ 0.897923] pci 0000:09:06.0: IO window: 0x007400-0x0074ff [ 0.897932] pci 0000:09:06.0: PREFETCH window: 0x88000000-0x8bffffff [ 0.897940] pci 0000:09:06.0: MEM window: 0x8c000000-0x8fffffff [ 0.897948] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 0.897954] pci 0000:00:1e.0: IO window: 0x7000-0x7fff [ 0.897964] pci 0000:00:1e.0: MEM window: 0xd2000000-0xd20fffff [ 0.897972] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff [ 0.897995] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.898002] pci 0000:00:01.0: setting latency timer to 64 [ 0.898017] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.898025] pci 0000:00:1c.0: setting latency timer to 64 [ 0.898038] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.898046] pci 0000:00:1c.1: setting latency timer to 64 [ 0.898062] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.898070] pci 0000:00:1c.2: setting latency timer to 64 [ 0.898085] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.898093] pci 0000:00:1c.3: setting latency timer to 64 [ 0.898102] pci 0000:00:1e.0: enabling device (0004 -> 0007) [ 0.898112] pci 0000:00:1e.0: setting latency timer to 64 [ 0.898125] pci 0000:09:06.0: enabling device (0000 -> 0003) [ 0.898134] pci 0000:09:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.898146] bus: 00 index 0 io port: [0x00-0xffff] [ 0.898151] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.898155] bus: 01 index 0 io port: [0x2000-0x2fff] [ 0.898160] bus: 01 index 1 mmio: [0xd0000000-0xd1ffffff] [ 0.898164] bus: 01 index 2 mmio: [0xb0000000-0xbfffffff] [ 0.898168] bus: 01 index 3 mmio: [0x0-0x0] [ 0.898172] bus: 02 index 0 io port: [0x3000-0x3fff] [ 0.898176] bus: 02 index 1 mmio: [0xcc000000-0xcdffffff] [ 0.898181] bus: 02 index 2 mmio: [0xc4000000-0xc5ffffff] [ 0.898184] bus: 02 index 3 mmio: [0x0-0x0] [ 0.898189] bus: 03 index 0 io port: [0x4000-0x4fff] [ 0.898193] bus: 03 index 1 mmio: [0xc8000000-0xc9ffffff] [ 0.898197] bus: 03 index 2 mmio: [0xc0000000-0xc1ffffff] [ 0.898201] bus: 03 index 3 mmio: [0x0-0x0] [ 0.898205] bus: 05 index 0 io port: [0x5000-0x5fff] [ 0.898209] bus: 05 index 1 mmio: [0xca000000-0xcbffffff] [ 0.898213] bus: 05 index 2 mmio: [0xc2000000-0xc3ffffff] [ 0.898217] bus: 05 index 3 mmio: [0x0-0x0] [ 0.898221] bus: 07 index 0 io port: [0x6000-0x6fff] [ 0.898225] bus: 07 index 1 mmio: [0xce000000-0xcfffffff] [ 0.898229] bus: 07 index 2 mmio: [0xc6000000-0xc7ffffff] [ 0.898233] bus: 07 index 3 mmio: [0x0-0x0] [ 0.898237] bus: 09 index 0 io port: [0x7000-0x7fff] [ 0.898241] bus: 09 index 1 mmio: [0xd2000000-0xd20fffff] [ 0.898246] bus: 09 index 2 mmio: [0x88000000-0x8bffffff] [ 0.898250] bus: 09 index 3 io port: [0x00-0xffff] [ 0.898254] bus: 09 index 4 mmio: [0x000000-0xffffffff] [ 0.898258] bus: 0a index 0 io port: [0x7000-0x70ff] [ 0.898262] bus: 0a index 1 io port: [0x7400-0x74ff] [ 0.898266] bus: 0a index 2 mmio: [0x88000000-0x8bffffff] [ 0.898270] bus: 0a index 3 mmio: [0x8c000000-0x8fffffff] [ 0.898284] NET: Registered protocol family 2 [ 0.912096] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.912516] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.912987] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.913231] TCP: Hash tables configured (established 131072 bind 65536) [ 0.913235] TCP reno registered [ 0.920107] NET: Registered protocol family 1 [ 0.920309] checking if image is initramfs... it is [ 2.117066] Freeing initrd memory: 7384k freed [ 2.117121] Simple Boot Flag at 0x36 set to 0x1 [ 2.117423] cpufreq: No nForce2 chipset. [ 2.117657] audit: initializing netlink socket (disabled) [ 2.117691] type=2000 audit(1241728708.116:1): initialized [ 2.131616] highmem bounce pool size: 64 pages [ 2.131625] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.134177] VFS: Disk quotas dquot_6.5.1 [ 2.134286] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.135437] fuse init (API version 7.10) [ 2.135592] msgmni has been set to 1698 [ 2.135912] alg: No test for stdrng (krng) [ 2.135934] io scheduler noop registered [ 2.135938] io scheduler anticipatory registered [ 2.135942] io scheduler deadline registered [ 2.135966] io scheduler cfq registered (default) [ 10.136014] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 10.136080] pci 0000:01:00.0: Boot video device [ 10.172222] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 10.172288] pcieport-driver 0000:00:01.0: found MSI capability [ 10.172330] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X [ 10.172348] pci_express 0000:00:01.0:pcie00: allocate port service [ 10.172375] pci_express 0000:00:01.0:pcie03: allocate port service [ 10.172463] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 10.172529] pcieport-driver 0000:00:1c.0: found MSI capability [ 10.172576] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X [ 10.172598] pci_express 0000:00:1c.0:pcie00: allocate port service [ 10.172622] pci_express 0000:00:1c.0:pcie02: allocate port service [ 10.172645] pci_express 0000:00:1c.0:pcie03: allocate port service [ 10.172751] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 10.172818] pcieport-driver 0000:00:1c.1: found MSI capability [ 10.172864] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X [ 10.172886] pci_express 0000:00:1c.1:pcie00: allocate port service [ 10.172910] pci_express 0000:00:1c.1:pcie02: allocate port service [ 10.172937] pci_express 0000:00:1c.1:pcie03: allocate port service [ 10.173056] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 10.173122] pcieport-driver 0000:00:1c.2: found MSI capability [ 10.173168] pcieport-driver 0000:00:1c.2: irq 2300 for MSI/MSI-X [ 10.173190] pci_express 0000:00:1c.2:pcie00: allocate port service [ 10.173215] pci_express 0000:00:1c.2:pcie02: allocate port service [ 10.173238] pci_express 0000:00:1c.2:pcie03: allocate port service [ 10.173345] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 10.173411] pcieport-driver 0000:00:1c.3: found MSI capability [ 10.173457] pcieport-driver 0000:00:1c.3: irq 2299 for MSI/MSI-X [ 10.173479] pci_express 0000:00:1c.3:pcie00: allocate port service [ 10.173503] pci_express 0000:00:1c.3:pcie02: allocate port service [ 10.173527] pci_express 0000:00:1c.3:pcie03: allocate port service [ 10.173657] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.173867] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 10.189238] ACPI: AC Adapter [ADP0] (on-line) [ 10.397377] ACPI: Battery Slot [BAT0] (battery present) [ 10.397524] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 10.397530] ACPI: Power Button (FF) [PWRF] [ 10.397614] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 10.397704] ACPI: Lid Switch [LID] [ 10.397784] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 10.397789] ACPI: Power Button (CM) [PWRB] [ 10.397865] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 10.397870] ACPI: Sleep Button (CM) [SLPB] [ 10.398151] fan PNP0C0B:00: registered as cooling_device0 [ 10.398166] ACPI: Fan [FAN0] (off) [ 10.399145] ACPI: SSDT 7FE9234D, 01EA (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 10.400186] ACPI: SSDT 7FE920F0, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 10.401389] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 10.401428] processor ACPI_CPU:00: registered as cooling_device1 [ 10.401435] ACPI: Processor [CPU0] (supports 8 throttling states) [ 10.402032] ACPI: SSDT 7FE92537, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 10.402739] ACPI: SSDT 7FE922C8, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 10.403877] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 10.403914] processor ACPI_CPU:01: registered as cooling_device2 [ 10.403922] ACPI: Processor [CPU1] (supports 8 throttling states) [ 10.437964] thermal LNXTHERM:01: registered as thermal_zone0 [ 10.438348] ACPI: Thermal Zone [TZ00] (50 C) [ 10.438573] thermal LNXTHERM:02: registered as thermal_zone1 [ 10.438795] ACPI: Thermal Zone [TZ01] (47 C) [ 10.438905] isapnp: Scanning for PnP cards... [ 10.793587] isapnp: No Plug & Play device found [ 10.805543] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 10.805691] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.806452] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.807867] brd: module loaded [ 10.808444] loop: module loaded [ 10.808579] Fixed MDIO Bus: probed [ 10.808589] PPP generic driver version 2.4.2 [ 10.808691] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 10.808744] Driver 'sd' needs updating - please use bus_type methods [ 10.808762] Driver 'sr' needs updating - please use bus_type methods [ 10.808837] ahci 0000:00:1f.2: version 3.0 [ 10.808856] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 10.808917] ahci 0000:00:1f.2: irq 2298 for MSI/MSI-X [ 10.809028] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl RAID mode [ 10.809034] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 10.809043] ahci 0000:00:1f.2: setting latency timer to 64 [ 10.809284] scsi0 : ahci [ 10.809442] scsi1 : ahci [ 10.809547] scsi2 : ahci [ 10.809645] scsi3 : ahci [ 10.809720] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2298 [ 10.809724] ata2: DUMMY [ 10.809729] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2298 [ 10.809733] ata4: DUMMY [ 11.532030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 11.537840] ata1.00: ATA-7: SAMSUNG HM120JI, YF100-10, max UDMA7 [ 11.537846] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 11.543824] ata1.00: configured for UDMA/133 [ 12.280027] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 12.285825] ata3.00: ATA-7: SAMSUNG HM120JI, YF100-10, max UDMA7 [ 12.285830] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 12.291806] ata3.00: configured for UDMA/133 [ 12.304190] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM120JI YF10 PQ: 0 ANSI: 5 [ 12.304362] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 12.304392] sd 0:0:0:0: [sda] Write Protect is off [ 12.304397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.304446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.304545] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 12.304574] sd 0:0:0:0: [sda] Write Protect is off [ 12.304578] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.304626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.304633] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 12.390838] sd 0:0:0:0: [sda] Attached SCSI disk [ 12.390918] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.391055] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM120JI YF10 PQ: 0 ANSI: 5 [ 12.391207] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 12.391235] sd 2:0:0:0: [sdb] Write Protect is off [ 12.391240] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 12.391288] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.391382] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 12.391410] sd 2:0:0:0: [sdb] Write Protect is off [ 12.391414] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 12.391462] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.391469] sdb: sdb1 [ 12.417872] sd 2:0:0:0: [sdb] Attached SCSI disk [ 12.417939] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 12.418027] ata_piix 0000:00:1f.1: version 2.12 [ 12.418040] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 12.418092] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 12.418207] scsi4 : ata_piix [ 12.418321] scsi5 : ata_piix [ 12.419333] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 12.419338] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 12.597423] ata5.00: ATAPI: TOSHIBA DVDW/HD TS-L802A, AC06, max UDMA/33 [ 12.629325] ata5.00: configured for UDMA/33 [ 12.634055] ata6: port disabled. ignoring. [ 12.644077] scsi 4:0:0:0: CD-ROM TOSHIBA DVDW/HD TS-L802A AC06 PQ: 0 ANSI: 5 [ 12.687203] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 12.687209] Uniform CD-ROM driver Revision: 3.20 [ 12.687367] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 12.687433] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 12.688745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.688781] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 12.688802] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 12.688808] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 12.688915] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 12.692829] ehci_hcd 0000:00:1d.7: debug port 1 [ 12.692839] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 12.692861] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2304000 [ 12.708017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 12.708156] usb usb1: configuration #1 chosen from 1 choice [ 12.708206] hub 1-0:1.0: USB hub found [ 12.708219] hub 1-0:1.0: 8 ports detected [ 12.708432] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.708463] uhci_hcd: USB Universal Host Controller Interface driver [ 12.708498] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 12.708509] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 12.708515] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 12.708591] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 12.708626] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 [ 12.708757] usb usb2: configuration #1 chosen from 1 choice [ 12.708803] hub 2-0:1.0: USB hub found [ 12.708815] hub 2-0:1.0: 2 ports detected [ 12.708959] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.708970] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 12.708976] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 12.709060] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 12.709105] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 12.709230] usb usb3: configuration #1 chosen from 1 choice [ 12.709277] hub 3-0:1.0: USB hub found [ 12.709289] hub 3-0:1.0: 2 ports detected [ 12.709445] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 12.709455] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 12.709461] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 12.709536] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 12.709581] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 12.709708] usb usb4: configuration #1 chosen from 1 choice [ 12.709758] hub 4-0:1.0: USB hub found [ 12.709769] hub 4-0:1.0: 2 ports detected [ 12.709914] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 12.709924] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 12.709930] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 12.710004] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 12.710049] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 12.710177] usb usb5: configuration #1 chosen from 1 choice [ 12.710223] hub 5-0:1.0: USB hub found [ 12.710233] hub 5-0:1.0: 2 ports detected [ 12.710502] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 12.712689] i8042.c: Detected active multiplexing controller, rev 1.1. [ 12.714344] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.714355] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 12.714361] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 12.714365] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 12.714370] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 12.716071] mice: PS/2 mouse device common for all mice [ 12.736112] rtc_cmos 00:07: RTC can wake from S4 [ 12.736167] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 12.736206] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 12.736310] device-mapper: uevent: version 1.0.3 [ 12.736463] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 12.736601] device-mapper: multipath: version 1.0.5 loaded [ 12.736606] device-mapper: multipath round-robin: version 1.0.0 loaded [ 12.736744] EISA: Probing bus 0 at eisa.0 [ 12.736754] Cannot allocate resource for EISA slot 1 [ 12.736758] Cannot allocate resource for EISA slot 2 [ 12.736763] Cannot allocate resource for EISA slot 3 [ 12.736767] Cannot allocate resource for EISA slot 4 [ 12.736771] Cannot allocate resource for EISA slot 5 [ 12.736776] Cannot allocate resource for EISA slot 6 [ 12.736780] Cannot allocate resource for EISA slot 7 [ 12.736790] EISA: Detected 0 cards. [ 12.737010] cpuidle: using governor ladder [ 12.737241] cpuidle: using governor menu [ 12.738192] TCP cubic registered [ 12.738372] NET: Registered protocol family 10 [ 12.739184] lo: Disabled Privacy Extensions [ 12.739841] NET: Registered protocol family 17 [ 12.739871] Bluetooth: L2CAP ver 2.11 [ 12.739875] Bluetooth: L2CAP socket layer initialized [ 12.739880] Bluetooth: SCO (Voice Link) ver 0.6 [ 12.739883] Bluetooth: SCO socket layer initialized [ 12.739944] Bluetooth: RFCOMM socket layer initialized [ 12.739950] Marking TSC unstable due to TSC halts in idle [ 12.739955] Bluetooth: RFCOMM TTY layer initialized [ 12.739959] Bluetooth: RFCOMM ver 1.10 [ 12.740901] Using IPI No-Shortcut mode [ 12.740997] registered taskstats version 1 [ 12.741124] Magic number: 9:222:649 [ 12.741132] scsi_host host3: hash matches [ 12.741134] scsi host3: hash matches [ 12.741218] rtc_cmos 00:07: setting system clock to 2009-05-07 20:38:39 UTC (1241728719) [ 12.741221] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 12.741223] EDD information not available. [ 12.741496] Freeing unused kernel memory: 532k freed [ 12.741645] Write protecting the kernel text: 4112k [ 12.741703] Write protecting the kernel read-only data: 1524k [ 12.769928] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 13.064244] sky2 driver version 1.22 [ 13.064288] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.064301] sky2 0000:02:00.0: setting latency timer to 64 [ 13.064345] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2 [ 13.112623] sky2 0000:02:00.0: Marvell Yukon 88E8055 Gigabit Ethernet Controller [ 13.112626] Part Number: Yukon 88E8055 [ 13.112628] Engineering Level: Rev. 1.2 [ 13.112630] Manufacturer: Marvell [ 13.112716] sky2 0000:02:00.0: irq 2297 for MSI/MSI-X [ 13.124913] ohci1394 0000:09:06.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 13.124921] ohci1394 0000:09:06.1: setting latency timer to 64 [ 13.133167] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 13.174680] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d2005800-d2005fff] Max Packet=[2048] IR/IT contexts=[4/8] [ 13.204646] sky2 eth0: addr 00:a0:d1:a1:17:21 [ 13.281152] usb 1-6: configuration #1 chosen from 1 choice [ 13.521038] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 13.717108] usb 3-2: configuration #1 chosen from 1 choice [ 13.719190] hub 3-2:1.0: USB hub found [ 13.721164] hub 3-2:1.0: 4 ports detected [ 13.778900] PM: Starting manual resume from disk [ 13.778903] PM: Resume from partition 8:7 [ 13.778905] PM: Checking hibernation image. [ 13.779171] PM: Resume from disk failed. [ 13.798033] EXT4-fs: barriers enabled [ 13.812758] kjournald2 starting. Commit interval 5 seconds [ 13.812785] EXT4-fs: delayed allocation enabled [ 13.812788] EXT4-fs: file extents enabled [ 13.813113] EXT4-fs: mballoc enabled [ 13.813117] EXT4-fs: mounted filesystem with ordered data mode. [ 14.001178] usb 3-2.4: new low speed USB device using uhci_hcd and address 3 [ 14.134241] usb 3-2.4: configuration #1 chosen from 1 choice [ 14.488422] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00a0d1a0d1a11721] [ 19.965070] udev: starting version 141 [ 20.440642] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 20.470390] Linux agpgart interface v0.103 [ 20.661282] parport_pc 00:0a: reported by Plug and Play ACPI [ 20.661360] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 20.929760] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 21.081392] yenta_cardbus 0000:09:06.0: CardBus bridge found [1025:006c] [ 21.081416] yenta_cardbus 0000:09:06.0: Enabling burst memory read transactions [ 21.081422] yenta_cardbus 0000:09:06.0: Using CSCINT to route CSC interrupts to PCI [ 21.081424] yenta_cardbus 0000:09:06.0: Routing CardBus interrupts to PCI [ 21.081431] yenta_cardbus 0000:09:06.0: TI: mfunc 0x01a61b22, devctl 0x66 [ 21.116080] cfg80211: Calling CRDA to update world regulatory domain [ 21.313133] yenta_cardbus 0000:09:06.0: ISA IRQ mask 0x0c78, PCI irq 21 [ 21.313137] yenta_cardbus 0000:09:06.0: Socket status: 30000006 [ 21.313142] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #09 to #0d [ 21.313149] yenta_cardbus 0000:09:06.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [ 21.313153] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: clean. [ 21.313413] yenta_cardbus 0000:09:06.0: pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff [ 21.313416] yenta_cardbus 0000:09:06.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 21.326004] cfg80211: World regulatory domain updated: [ 21.326007] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.326009] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.326012] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.326014] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.326016] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.326018] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.342340] usbcore: registered new interface driver hiddev [ 21.357469] input: USB Optical Wheel Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.4/3-2.4:1.0/input/input7 [ 21.357786] generic-usb 0003:04FC:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Wheel Mouse] on usb-0000:00:1d.1-2.4/input0 [ 21.357805] usbcore: registered new interface driver usbhid [ 21.357827] usbhid: v2.6:USB HID core driver [ 21.410576] intel_rng: FWH not detected [ 21.470701] sdhci: Secure Digital Host Controller Interface driver [ 21.470704] sdhci: Copyright(c) Pierre Ossman [ 21.504500] sdhci-pci 0000:09:06.3: SDHCI controller found [104c:803c] (rev 0) [ 21.504515] sdhci-pci 0000:09:06.3: enabling device (0000 -> 0002) [ 21.504523] sdhci-pci 0000:09:06.3: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 21.504582] sdhci-pci 0000:09:06.3: setting latency timer to 64 [ 21.504648] mmc0: SDHCI controller on PCI [0000:09:06.3] using DMA [ 21.622242] acer-wmi: Acer Laptop ACPI-WMI Extras [ 21.632246] acer-wmi: software RFKILL enabled [ 21.654974] ppdev: user-space parallel port driver [ 21.712036] tifm_7xx1 0000:09:06.2: enabling device (0000 -> 0002) [ 21.712045] tifm_7xx1 0000:09:06.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 21.712054] tifm_7xx1 0000:09:06.2: setting latency timer to 64 [ 21.734534] Linux video capture interface: v2.00 [ 21.807753] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 21.841013] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 21.845329] iTCO_vendor_support: vendor-support=0 [ 21.869176] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 21.869356] iTCO_wdt: Found a ICH7-M DH TCO device (Version=2, TCOBASE=0x1060) [ 21.869423] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 21.957713] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 21.957716] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 21.957824] iwl3945 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 21.957838] iwl3945 0000:07:00.0: setting latency timer to 64 [ 21.957908] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 21.958213] iwl3945 0000:07:00.0: irq 2296 for MSI/MSI-X [ 22.009356] uvcvideo: Found UVC 1.00 device (046d:09b0) [ 22.012791] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 22.013327] input: UVC Camera (046d:09b0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input9 [ 22.015376] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 22.016931] usbcore: registered new interface driver uvcvideo [ 22.016956] USB Video Class driver (v0.1.0) [ 22.204380] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 22.206373] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 22.207166] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 22.207858] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 22.208763] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 22.219067] saa7130/34: v4l2 driver version 0.2.14 loaded [ 22.219116] saa7134 0000:09:04.0: enabling device (0000 -> 0002) [ 22.219124] saa7134 0000:09:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.219131] saa7133[0]: found at 0000:09:04.0, rev: 209, irq: 16, latency: 0, mmio: 0xd2005000 [ 22.219138] saa7134 0000:09:04.0: setting latency timer to 64 [ 22.219143] saa7133[0]: subsystem: 1461:a836, board: Avermedia M115 [card=138,autodetected] [ 22.219178] saa7133[0]: board init: gpio is a400000 [ 22.224093] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 22.363052] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 22.363144] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 22.403326] usb 4-1: configuration #1 chosen from 1 choice [ 22.408761] saa7133[0]: i2c eeprom 00: 61 14 36 a8 00 00 00 00 00 00 00 00 00 00 00 00 [ 22.408773] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 22.408784] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 c0 ff ff ff ff [ 22.408794] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408805] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff [ 22.408815] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408825] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408836] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408846] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408856] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408867] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408877] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408888] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408898] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408908] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.408919] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.460046] tuner' 0-0061: chip found @ 0xc2 (saa7133[0]) [ 22.496030] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 22.496140] usbcore: registered new interface driver btusb [ 22.579348] xc2028 0-0061: creating new instance [ 22.579352] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [ 22.579367] BUG: unable to handle kernel paging request at fffffff4 [ 22.579372] IP: [] saa7134_board_init2+0x140/0x710 [saa7134] [ 22.579383] *pde = 007b7067 *pte = 00000000 [ 22.579387] Oops: 0000 [#1] SMP [ 22.579391] last sysfs file: /sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer/dev [ 22.579395] Dumping ftrace buffer: [ 22.579397] (ftrace buffer empty) [ 22.579399] Modules linked in: tuner_xc2028 btusb tuner snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy arc4 snd_seq_oss ecb snd_seq_midi saa7134(+) snd_rawmidi ir_common snd_seq_midi_event v4l2_common uvcvideo joydev iwl3945 snd_seq videobuf_dma_sg compat_ioctl32 iTCO_wdt iTCO_vendor_support snd_timer pcmcia mac80211 videobuf_core videodev tifm_7xx1 snd_seq_device video ppdev tveeprom v4l1_compat acer_wmi led_class sdhci_pci sdhci tifm_core usbhid snd soundcore snd_page_alloc output cfg80211 yenta_socket rsrc_nonstatic pcmcia_core psmouse serio_raw parport_pc parport intel_agp agpgart pcspkr ohci1394 ieee1394 sky2 fbcon tileblit font bitblit softcursor [ 22.579454] [ 22.579457] Pid: 1773, comm: modprobe Not tainted (2.6.28-12-generic #43-Ubuntu) Aspire 9810 [ 22.579460] EIP: 0060:[] EFLAGS: 00010292 CPU: 0 [ 22.579467] EIP is at saa7134_board_init2+0x140/0x710 [saa7134] [ 22.579470] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 22.579472] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: f60dbc54 [ 22.579474] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 22.579476] Process modprobe (pid: 1773, ti=f60da000 task=f6023240 task.ti=f60da000) [ 22.579478] Stack: [ 22.579480] 00000303 f60dbc58 f60dbc58 f633e000 f6fb9000 f633e000 f60dbcd0 c014ade7 [ 22.579487] 000000d0 f7f2d889 656e7574 00000072 000000f0 f633e4b0 00000000 f633e140 [ 22.579494] f7f37590 f633e4b0 f60dbcd0 f7f2d94d 65626f72 642d7000 006d6561 000006ed [ 22.579501] Call Trace: [ 22.579504] [] ? request_module+0x97/0xf0 [ 22.579510] [] ? saa7134_i2c_eeprom+0xe9/0x110 [saa7134] [ 22.579523] [] ? saa7134_i2c_register+0x9d/0x120 [saa7134] [ 22.579532] [] ? saa7134_initdev+0x3cc/0x8d5 [saa7134] [ 22.579545] [] ? pci_device_probe+0x5e/0x80 [ 22.579552] [] ? really_probe+0x54/0x180 [ 22.579556] [] ? pci_match_device+0xbe/0xd0 [ 22.579563] [] ? driver_probe_device+0x3e/0x50 [ 22.579567] [] ? __driver_attach+0x89/0x90 [ 22.579570] [] ? bus_for_each_dev+0x53/0x80 [ 22.579573] [] ? pci_device_remove+0x0/0x40 [ 22.579577] [] ? driver_attach+0x19/0x20 [ 22.579580] [] ? __driver_attach+0x0/0x90 [ 22.579583] [] ? bus_add_driver+0x1c7/0x240 [ 22.579588] [] ? pci_device_remove+0x0/0x40 [ 22.579592] [] ? driver_register+0x69/0x140 [ 22.579597] [] ? saa7134_init+0x0/0x60 [saa7134] [ 22.579607] [] ? __pci_register_driver+0x4a/0x90 [ 22.579611] [] ? saa7134_init+0x0/0x60 [saa7134] [ 22.579619] [] ? saa7134_init+0x52/0x60 [saa7134] [ 22.579630] [] ? _stext+0x2e/0x170 [ 22.579633] [] ? sysfs_addrm_finish+0x15/0xf0 [ 22.579638] [] ? sysfs_add_one+0x13/0x50 [ 22.579641] [] ? sysfs_addrm_start+0x3f/0xa0 [ 22.579645] [] ? __vunmap+0x9c/0xe0 [ 22.579649] [] ? __vunmap+0x9c/0xe0 [ 22.579653] [] ? update_curr+0x8d/0x1e0 [ 22.579657] [] ? enqueue_entity+0x13c/0x360 [ 22.579661] [] ? xapic_wait_icr_idle+0x17/0x20 [ 22.579665] [] ? native_smp_send_reschedule+0x39/0x50 [ 22.579668] [] ? resched_task+0x60/0x70 [ 22.579671] [] ? try_to_wake_up+0x104/0x290 [ 22.579679] [] ? sys_init_module+0x88/0x1b0 [ 22.579684] [] ? sysenter_do_call+0x12/0x2f [ 22.579687] [] ? quirk_netmos+0xe/0xbb [ 22.579692] Code: 85 17 5d c8 8b 55 90 8b 82 2c 01 00 00 89 5c 24 04 c7 04 24 b8 84 f3 f7 89 44 24 08 e8 68 17 5d c8 66 90 8b 45 90 e8 40 fd ff ff <8b> 5d f4 31 c0 8b 75 f8 8b 7d fc 89 ec 5d c3 90 8b 4d 90 8b 71 [ 22.579733] EIP: [] saa7134_board_init2+0x140/0x710 [saa7134] SS:ESP 0068:f60dbc54 [ 22.579744] ---[ end trace 27ad10fea95a9e5a ]--- [ 23.000084] Clocksource tsc unstable (delta = -412410277 ns) [ 200.262452] lp0: using parport0 (interrupt-driven). [ 200.330999] Adding 1020088k swap on /dev/sda7. Priority:-1 extents:1 across:1020088k [ 200.866269] EXT4 FS on sda6, internal journal on sda6:8 [ 201.671599] EXT4-fs: barriers enabled [ 201.686508] kjournald2 starting. Commit interval 5 seconds [ 201.686901] EXT4 FS on sda8, internal journal on sda8:8 [ 201.686903] EXT4-fs: delayed allocation enabled [ 201.686905] EXT4-fs: file extents enabled [ 201.687614] EXT4-fs: mballoc enabled [ 201.687618] EXT4-fs: mounted filesystem with ordered data mode. [ 201.900612] type=1505 audit(1241721708.655:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2252 [ 201.944672] type=1505 audit(1241721708.699:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2256 [ 201.944757] type=1505 audit(1241721708.699:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2256 [ 201.944795] type=1505 audit(1241721708.699:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2256 [ 201.944834] type=1505 audit(1241721708.699:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2256 [ 202.065946] type=1505 audit(1241721708.823:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2261 [ 202.066092] type=1505 audit(1241721708.823:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2261 [ 202.092070] type=1505 audit(1241721708.847:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2265 [ 203.782888] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 203.782890] Bluetooth: BNEP filters: protocol multicast [ 203.865291] Bridge firewalling registered [ 209.243823] sky2 eth0: enabling interface [ 209.244008] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 209.244649] iwl3945 0000:07:00.0: firmware: requesting iwlwifi-3945-1.ucode [ 209.417959] Registered led device: iwl-phy0:radio [ 209.418033] Registered led device: iwl-phy0:assoc [ 209.418063] Registered led device: iwl-phy0:RX [ 209.418092] Registered led device: iwl-phy0:TX [ 209.427213] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 211.074079] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 211.074323] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 220.487630] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 221.124010] eth0: no IPv6 routers present