[   48.149215] [drm] Initialized drm 1.1.0 20060810
[   48.156081] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   48.156088] pci 0000:00:02.0: setting latency timer to 64
[   48.156277] [drm] Initialized i915 1.6.0 20080730 on minor 0
[   48.158284] [drm:i915_setparam] *ERROR* unknown parameter 4
[   48.158309] [drm:i915_getparam] *ERROR* Unknown parameter 6
[   49.569569] [drm:i915_getparam] *ERROR* Unknown parameter 6
[   49.829606] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   49.831338] iwl3945 0000:0b:00.0: firmware: requesting iwlwifi-3945-1.ucode
[   49.941900] iwl3945: Radio disabled by HW RF Kill switch
[  110.422033] PPP BSD Compression module registered
[  110.441872] PPP Deflate Compression module registered
[  956.704098] usb 2-1: USB disconnect, address 2
[  956.706522] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  956.706555] option 2-1:1.0: device disconnected
[  956.706977] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  956.707007] option 2-1:1.1: device disconnected
[  956.707621] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  956.707652] option 2-1:1.2: device disconnected
[  964.568578] [drm:i915_getparam] *ERROR* Unknown parameter 6
[  965.277247] b44: eth0: powering down PHY
[  966.357560] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[  966.557565] PM: Syncing filesystems ... done.
[  966.571051] PM: Preparing system for mem sleep
[  966.571058] Freezing user space processes ... (elapsed 0.00 seconds) done.
[  966.572562] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[  966.572644] PM: Entering mem sleep
[  966.572659] Suspending console(s) (use no_console_suspend to debug)
[  966.573397] pci 0000:00:02.0: PCI INT A disabled
[  967.084165] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  967.084464] sd 0:0:0:0: [sda] Stopping disk
[  967.529402] ACPI handle has no context!
[  967.529409] sdhci-pci 0000:03:01.1: PCI INT B disabled
[  967.529416] ACPI handle has no context!
[  967.564118] b44 0000:03:00.0: PCI INT A disabled
[  967.564124] ACPI handle has no context!
[  967.596212] ata_piix 0000:00:1f.2: PCI INT B disabled
[  967.612205] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[  967.628099] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[  967.628136] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[  967.628174] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[  967.628211] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[  967.660081] HDA Intel 0000:00:1b.0: PCI INT A disabled
[  967.676158] PM: suspend devices took 1.108 seconds
[  967.680091] ACPI: Preparing to enter system sleep state S3
[  967.680604] Disabling non-boot CPUs ...
[  967.784016] CPU 1 is now offline
[  967.784019] SMP alternatives: switching to UP code
[  967.946493] CPU0 attaching NULL sched-domain.
[  967.946497] CPU1 attaching NULL sched-domain.
[  967.946985] CPU0 attaching NULL sched-domain.
[  967.947210] CPU1 is down
[  967.947210] Back to C!
[  967.947210] Enabling non-boot CPUs ...
[  967.947210] SMP alternatives: switching to SMP code
[  968.109247] Booting processor 1 APIC 0x1 ip 0x6000
[  967.946315] Initializing CPU#1
[  967.946315] Calibrating delay using timer specific routine.. 3725.98 BogoMIPS (lpj=7451960)
[  967.946315] CPU: L1 I cache: 32K, L1 D cache: 32K
[  967.946315] CPU: L2 cache: 1024K
[  967.946315] CPU: Physical Processor ID: 0
[  967.946315] CPU: Processor Core ID: 1
[  968.200386] CPU1: Genuine Intel(R) CPU           T2130  @ 1.86GHz stepping 0c
[  968.200463] CPU0 attaching NULL sched-domain.
[  968.200831] CPU0 attaching sched-domain:
[  968.200835]  domain 0: span 0-1 level MC
[  968.200837]   groups: 0 1
[  968.200842] CPU1 attaching sched-domain:
[  968.200844]  domain 0: span 0-1 level MC
[  968.200845]   groups: 1 0
[  968.201018] Switched to high resolution mode on CPU 1
[  968.204021] CPU1 is up
[  968.204024] ACPI: Waking up from system sleep state S3
[  968.270047] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  968.270061] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
[  968.284109] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[  968.284131] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xffa7c004, writing 0xefebc004)
[  968.284137] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[  968.284144] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102)
[  968.284169] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[  968.284176] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  968.284211] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x20100)
[  968.284224] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[  968.284230] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xefd0efd0)
[  968.284236] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
[  968.284241] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0b00)
[  968.284250] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[  968.284257] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[  968.284300] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[  968.284319] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x20400)
[  968.284333] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe011e001)
[  968.284339] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xefc0efa0)
[  968.284344] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0xd0d0)
[  968.284350] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x6 (was 0x0, writing 0xd0c00)
[  968.284359] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[  968.284366] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[  968.284408] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[  968.284418] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[  968.284423] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[  968.284479] usb usb2: root hub lost power or was reset
[  968.284499] uhci_hcd 0000:00:1d.1: enabling device (0000 -> 0001)
[  968.284503] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[  968.284510] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[  968.284517] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[  968.284531] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xbf61)
[  968.284570] usb usb3: root hub lost power or was reset
[  968.284589] uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
[  968.284593] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[  968.284600] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[  968.284606] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x307)
[  968.284621] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xbf41)
[  968.284660] usb usb4: root hub lost power or was reset
[  968.284679] uhci_hcd 0000:00:1d.3: enabling device (0000 -> 0001)
[  968.284683] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[  968.284689] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[  968.284696] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x405)
[  968.284710] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0xbf21)
[  968.284749] usb usb5: root hub lost power or was reset
[  968.300080] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[  968.300086] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[  968.300153] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x100f1, writing 0x1fff1)
[  968.300159] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x90, writing 0xef90ef90)
[  968.300165] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x2280e0f0, writing 0x228000f0)
[  968.300178] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[  968.300195] pci 0000:00:1e.0: setting latency timer to 64
[  968.300236] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
[  968.316085] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x204)
[  968.316122] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  968.316127] ata_piix 0000:00:1f.2: setting latency timer to 64
[  968.316151] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x204)
[  968.316187] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800101)
[  968.316456] ata2.00: _GTF evaluation failed (AE 0x1001)
[  968.332085] iwl3945 0000:0b:00.0: enabling device (0000 -> 0002)
[  968.332158] iwl3945 0000:0b:00.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[  968.332226] iwl3945 0000:0b:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xefdff000)
[  968.332239] iwl3945 0000:0b:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[  968.332258] iwl3945 0000:0b:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100506)
[  968.348079] b44 0000:03:00.0: enabling device (0000 -> 0002)
[  968.348084] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  968.348094] b44 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[  968.348115] b44 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xef9fe000)
[  968.348121] b44 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[  968.348128] b44 0000:03:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106)
[  968.384089] ohci1394 0000:03:01.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020103)
[  968.384112] ohci1394 0000:03:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xef9fd800)
[  968.384118] ohci1394 0000:03:01.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[  968.384125] ohci1394 0000:03:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[  968.436743] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[ef9fd800-ef9fdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[  968.456089] sdhci-pci 0000:03:01.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[  968.456113] sdhci-pci 0000:03:01.1: restoring config space at offset 0x4 (was 0x0, writing 0xef9fd500)
[  968.456118] sdhci-pci 0000:03:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[  968.456126] sdhci-pci 0000:03:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[  968.456141] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[  968.457165] pci 0000:03:01.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[  968.457187] pci 0000:03:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xef9fd600)
[  968.457195] pci 0000:03:01.2: restoring config space at offset 0x2 (was 0x8800001, writing 0x880000a)
[  968.457201] pci 0000:03:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100102)
[  968.457206] pci 0000:03:01.2: restoring config space at offset 0x0 (was 0x8431180, writing 0x5921180)
[  968.457227] pci 0000:03:01.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[  968.457249] pci 0000:03:01.3: restoring config space at offset 0x4 (was 0x0, writing 0xef9fd700)
[  968.457257] pci 0000:03:01.3: restoring config space at offset 0x2 (was 0x880000a, writing 0x8800005)
[  968.457263] pci 0000:03:01.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100102)
[  968.457268] pci 0000:03:01.3: restoring config space at offset 0x0 (was 0x5921180, writing 0x8521180)
[  968.457383] sd 0:0:0:0: [sda] Starting disk
[  969.028504] ata2.00: configured for UDMA/33
[  970.004070] iwl3945: Radio Frequency Kill Switch is On:
[  970.004071] Kill switch must be turned off for wireless networking to work.
[  970.108376] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[  970.129146] ata1.00: configured for UDMA/133
[  970.133314] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[  970.133335] sd 0:0:0:0: [sda] Write Protect is off
[  970.133337] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  970.133366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  970.332084] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  970.332089] pci 0000:00:02.0: setting latency timer to 64
[  970.333348] PM: resume devices took 2.124 seconds
[  970.333385] PM: Finishing wakeup.
[  970.333387] Restarting tasks ... done.
[  970.426801] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[  970.623663] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  970.645338] iwl3945: Radio disabled by HW RF Kill switch
[ 2104.292137] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 2104.452332] usb 2-1: configuration #1 chosen from 1 choice
[ 2104.524182] Initializing USB Mass Storage driver...
[ 2104.528673] usb-storage: device ignored
[ 2104.530968] usbcore: registered new interface driver usb-storage
[ 2104.530977] USB Mass Storage support registered.
[ 2134.209078] usb 2-1: USB disconnect, address 3
[ 2140.133072] usb 2-1: new full speed USB device using uhci_hcd and address 4
[ 2140.297642] usb 2-1: configuration #1 chosen from 1 choice
[ 2140.299604] option 2-1:1.0: GSM modem (1-port) converter detected
[ 2140.299695] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 2140.303652] option 2-1:1.1: GSM modem (1-port) converter detected
[ 2140.303722] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 2140.305701] option 2-1:1.2: GSM modem (1-port) converter detected
[ 2140.305772] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 2914.615764] Registered led device: iwl-phy0:radio
[ 2914.616767] Registered led device: iwl-phy0:assoc
[ 2914.618480] Registered led device: iwl-phy0:RX
[ 2914.618550] Registered led device: iwl-phy0:TX
[ 2914.636097] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2942.497945] ------------[ cut here ]------------
[ 2942.497954] WARNING: at /build/buildd/linux-2.6.28/drivers/usb/serial/usb-serial.c:313 serial_write+0x9f/0xb0()
[ 2942.497961] Modules linked in: usb_storage ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt i915 drm binfmt_misc bridge stp bnep input_polldev i8k sbp2 lp parport arc4 ecb joydev snd_hda_intel snd_pcm_oss snd_mixer_oss iwl3945 snd_pcm mac80211 led_class snd_timer snd soundcore intel_agp agpgart iTCO_wdt iTCO_vendor_support option cfg80211 snd_page_alloc video sdhci_pci sdhci psmouse dcdbas output pcspkr serio_raw sha256_generic aes_i586 aes_generic cbc ohci1394 ieee1394 b44 ssb mii dm_crypt fbcon tileblit font bitblit softcursor
[ 2942.498079] Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.28-11-generic #38-Ubuntu
[ 2942.498085] Call Trace:
[ 2942.498095]  [<c0500e56>] ? printk+0x18/0x1a
[ 2942.498105]  [<c0139b24>] warn_on_slowpath+0x54/0x80
[ 2942.498114]  [<c0128206>] ? wakeup_preempt_entity+0x76/0xb0
[ 2942.498123]  [<c0133b74>] ? try_to_wake_up+0x104/0x290
[ 2942.498131]  [<c0127c8d>] ? update_curr+0x8d/0x1e0
[ 2942.498138]  [<c03d688f>] serial_write+0x9f/0xb0
[ 2942.498150]  [<f83f3c6b>] ppp_async_push+0xeb/0x130 [ppp_async]
[ 2942.498160]  [<f83f42fd>] ppp_async_process+0x6d/0x80 [ppp_async]
[ 2942.498170]  [<c013ed18>] tasklet_action+0x78/0x100
[ 2942.498178]  [<c013f197>] __do_softirq+0x97/0x170
[ 2942.498187]  [<c013f2cd>] do_softirq+0x5d/0x60
[ 2942.498195]  [<c013f35a>] ksoftirqd+0x8a/0x120
[ 2942.498203]  [<c013f2d0>] ? ksoftirqd+0x0/0x120
[ 2942.498212]  [<c014e90c>] kthread+0x3c/0x70
[ 2942.498219]  [<c014e8d0>] ? kthread+0x0/0x70
[ 2942.498228]  [<c0105477>] kernel_thread_helper+0x7/0x10
[ 2942.498234] ---[ end trace f82dbcd00cb2fb8e ]---
[ 2942.499902] ------------[ cut here ]------------
[ 2942.499908] WARNING: at /build/buildd/linux-2.6.28/drivers/usb/serial/usb-serial.c:313 serial_write+0x9f/0xb0()
[ 2942.499914] Modules linked in: usb_storage ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt i915 drm binfmt_misc bridge stp bnep input_polldev i8k sbp2 lp parport arc4 ecb joydev snd_hda_intel snd_pcm_oss snd_mixer_oss iwl3945 snd_pcm mac80211 led_class snd_timer snd soundcore intel_agp agpgart iTCO_wdt iTCO_vendor_support option cfg80211 snd_page_alloc video sdhci_pci sdhci psmouse dcdbas output pcspkr serio_raw sha256_generic aes_i586 aes_generic cbc ohci1394 ieee1394 b44 ssb mii dm_crypt fbcon tileblit font bitblit softcursor
[ 2942.500059] Pid: 4, comm: ksoftirqd/0 Tainted: G        W  2.6.28-11-generic #38-Ubuntu
[ 2942.500065] Call Trace:
[ 2942.500071]  [<c0500e56>] ? printk+0x18/0x1a
[ 2942.500079]  [<c0139b24>] warn_on_slowpath+0x54/0x80
[ 2942.500089]  [<c03d4a10>] ? uhci_urb_enqueue+0x50/0x300
[ 2942.500098]  [<c03b8624>] ? usb_hcd_submit_urb+0x74/0x180
[ 2942.500106]  [<c03b8b1f>] ? usb_submit_urb+0xff/0x260
[ 2942.500113]  [<c0127c8d>] ? update_curr+0x8d/0x1e0
[ 2942.500121]  [<c03d688f>] serial_write+0x9f/0xb0
[ 2942.500131]  [<f83f3c6b>] ppp_async_push+0xeb/0x130 [ppp_async]
[ 2942.500141]  [<f83f42fd>] ppp_async_process+0x6d/0x80 [ppp_async]
[ 2942.500150]  [<c013ed18>] tasklet_action+0x78/0x100
[ 2942.500159]  [<c013f197>] __do_softirq+0x97/0x170
[ 2942.500167]  [<c013f2cd>] do_softirq+0x5d/0x60
[ 2942.500175]  [<c013f35a>] ksoftirqd+0x8a/0x120
[ 2942.500183]  [<c013f2d0>] ? ksoftirqd+0x0/0x120
[ 2942.500191]  [<c014e90c>] kthread+0x3c/0x70
[ 2942.500198]  [<c014e8d0>] ? kthread+0x0/0x70
[ 2942.500206]  [<c0105477>] kernel_thread_helper+0x7/0x10
[ 2942.500211] ---[ end trace f82dbcd00cb2fb8e ]---
[ 2942.500225] ------------[ cut here ]------------
[ 2942.500231] WARNING: at /build/buildd/linux-2.6.28/drivers/usb/serial/usb-serial.c:313 serial_write+0x9f/0xb0()
[ 2942.500237] Modules linked in: usb_storage ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt i915 drm binfmt_misc bridge stp bnep input_polldev i8k sbp2 lp parport arc4 ecb joydev snd_hda_intel snd_pcm_oss snd_mixer_oss iwl3945 snd_pcm mac80211 led_class snd_timer snd soundcore intel_agp agpgart iTCO_wdt iTCO_vendor_support option cfg80211 snd_page_alloc video sdhci_pci sdhci psmouse dcdbas output pcspkr serio_raw sha256_generic aes_i586 aes_generic cbc ohci1394 ieee1394 b44 ssb mii dm_crypt fbcon tileblit font bitblit softcursor
[ 2942.500347] Pid: 4, comm: ksoftirqd/0 Tainted: G        W  2.6.28-11-generic #38-Ubuntu
[ 2942.500353] Call Trace:
[ 2942.500359]  [<c0500e56>] ? printk+0x18/0x1a
[ 2942.500366]  [<c0139b24>] warn_on_slowpath+0x54/0x80
[ 2942.500376]  [<c03d4a10>] ? uhci_urb_enqueue+0x50/0x300
[ 2942.500384]  [<c03b8624>] ? usb_hcd_submit_urb+0x74/0x180
[ 2942.500392]  [<c042bc78>] ? skb_release_data+0x68/0xa0
[ 2942.500400]  [<c042bb51>] ? __kfree_skb+0x31/0x80
[ 2942.500407]  [<c042bb51>] ? __kfree_skb+0x31/0x80
[ 2942.500414]  [<c042bb51>] ? __kfree_skb+0x31/0x80
[ 2942.500421]  [<c03d688f>] serial_write+0x9f/0xb0
[ 2942.500431]  [<f83f3c6b>] ppp_async_push+0xeb/0x130 [ppp_async]
[ 2942.500441]  [<f83f42fd>] ppp_async_process+0x6d/0x80 [ppp_async]
[ 2942.500450]  [<c013ed18>] tasklet_action+0x78/0x100
[ 2942.500458]  [<c013f197>] __do_softirq+0x97/0x170
[ 2942.500466]  [<c013f2cd>] do_softirq+0x5d/0x60
[ 2942.500474]  [<c013f35a>] ksoftirqd+0x8a/0x120
[ 2942.500482]  [<c013f2d0>] ? ksoftirqd+0x0/0x120
[ 2942.500490]  [<c014e90c>] kthread+0x3c/0x70
[ 2942.500498]  [<c014e8d0>] ? kthread+0x0/0x70
[ 2942.500505]  [<c0105477>] kernel_thread_helper+0x7/0x10
[ 2942.500510] ---[ end trace f82dbcd00cb2fb8e ]---
[ 2942.500518] ------------[ cut here ]------------
[ 2942.500524] WARNING: at /build/buildd/linux-2.6.28/drivers/usb/serial/usb-serial.c:313 serial_write+0x9f/0xb0()
[ 2942.500530] Modules linked in: usb_storage ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt i915 drm binfmt_misc bridge stp bnep input_polldev i8k sbp2 lp parport arc4 ecb joydev snd_hda_intel snd_pcm_oss snd_mixer_oss iwl3945 snd_pcm mac80211 led_class snd_timer snd soundcore intel_agp agpgart iTCO_wdt iTCO_vendor_support option cfg80211 snd_page_alloc video sdhci_pci sdhci psmouse dcdbas output pcspkr serio_raw sha256_generic aes_i586 aes_generic cbc ohci1394 ieee1394 b44 ssb mii dm_crypt fbcon tileblit font bitblit softcursor
[ 2942.500639] Pid: 4, comm: ksoftirqd/0 Tainted: G        W  2.6.28-11-generic #38-Ubuntu
[ 2942.500644] Call Trace:
[ 2942.500650]  [<c0500e56>] ? printk+0x18/0x1a
[ 2942.500658]  [<c0139b24>] warn_on_slowpath+0x54/0x80
[ 2942.500666]  [<c0139b2d>] ? warn_on_slowpath+0x5d/0x80
[ 2942.500675]  [<c03d4a10>] ? uhci_urb_enqueue+0x50/0x300
[ 2942.500683]  [<c03b8624>] ? usb_hcd_submit_urb+0x74/0x180
[ 2942.500691]  [<c042bc78>] ? skb_release_data+0x68/0xa0
[ 2942.500698]  [<c03d688f>] serial_write+0x9f/0xb0
[ 2942.500708]  [<f83f3c6b>] ppp_async_push+0xeb/0x130 [ppp_async]
[ 2942.500718]  [<f83f3cc8>] ppp_async_send+0x18/0x50 [ppp_async]
[ 2942.500726]  [<c0360d18>] ppp_channel_push+0x38/0xa0
[ 2942.500734]  [<c0360d8f>] ppp_output_wakeup+0xf/0x20
[ 2942.500743]  [<f83f4308>] ppp_async_process+0x78/0x80 [ppp_async]
[ 2942.500752]  [<c013ed18>] tasklet_action+0x78/0x100
[ 2942.500760]  [<c013f197>] __do_softirq+0x97/0x170
[ 2942.500769]  [<c013f2cd>] do_softirq+0x5d/0x60
[ 2942.500777]  [<c013f35a>] ksoftirqd+0x8a/0x120
[ 2942.500785]  [<c013f2d0>] ? ksoftirqd+0x0/0x120
[ 2942.500792]  [<c014e90c>] kthread+0x3c/0x70
[ 2942.500800]  [<c014e8d0>] ? kthread+0x0/0x70
[ 2942.500860]  [<c0105477>] kernel_thread_helper+0x7/0x10
[ 2942.500865] ---[ end trace f82dbcd00cb2fb8e ]---
[ 2942.500876] ------------[ cut here ]------------
[ 2942.500881] WARNING: at /build/buildd/linux-2.6.28/drivers/usb/serial/usb-serial.c:313 serial_write+0x9f/0xb0()
[ 2942.500887] Modules linked in: usb_storage ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt i915 drm binfmt_misc bridge stp bnep input_polldev i8k sbp2 lp parport arc4 ecb joydev snd_hda_intel snd_pcm_oss snd_mixer_oss iwl3945 snd_pcm mac80211 led_class snd_timer snd soundcore intel_agp agpgart iTCO_wdt iTCO_vendor_support option cfg80211 snd_page_alloc video sdhci_pci sdhci psmouse dcdbas output pcspkr serio_raw sha256_generic aes_i586 aes_generic cbc ohci1394 ieee1394 b44 ssb mii dm_crypt fbcon tileblit font bitblit softcursor
[ 2942.500998] Pid: 4, comm: ksoftirqd/0 Tainted: G        W  2.6.28-11-generic #38-Ubuntu
[ 2942.501008] Call Trace:
[ 2942.501014]  [<c0500e56>] ? printk+0x18/0x1a
[ 2942.501022]  [<c0139b24>] warn_on_slowpath+0x54/0x80
[ 2942.501030]  [<c01442cf>] ? del_timer+0x4f/0x60
[ 2942.501039]  [<c03d4a10>] ? uhci_urb_enqueue+0x50/0x300
[ 2942.501048]  [<c03b8624>] ? usb_hcd_submit_urb+0x74/0x180
[ 2942.501056]  [<c042bc78>] ? skb_release_data+0x68/0xa0
[ 2942.501063]  [<c042bb51>] ? __kfree_skb+0x31/0x80
[ 2942.501074]  [<c042bb51>] ? __kfree_skb+0x31/0x80
[ 2942.501081]  [<c042bb51>] ? __kfree_skb+0x31/0x80
[ 2942.501089]  [<c03d688f>] serial_write+0x9f/0xb0
[ 2942.501099]  [<f83f3c6b>] ppp_async_push+0xeb/0x130 [ppp_async]
[ 2942.501114]  [<f83f3ce9>] ppp_async_send+0x39/0x50 [ppp_async]
[ 2942.501127]  [<c0360d18>] ppp_channel_push+0x38/0xa0
[ 2942.501139]  [<c0360d8f>] ppp_output_wakeup+0xf/0x20
[ 2942.501153]  [<f83f4308>] ppp_async_process+0x78/0x80 [ppp_async]
[ 2942.501167]  [<c013ed18>] tasklet_action+0x78/0x100
[ 2942.501180]  [<c013f197>] __do_softirq+0x97/0x170
[ 2942.501193]  [<c013f2cd>] do_softirq+0x5d/0x60
[ 2942.501205]  [<c013f35a>] ksoftirqd+0x8a/0x120
[ 2942.501217]  [<c013f2d0>] ? ksoftirqd+0x0/0x120
[ 2942.501229]  [<c014e90c>] kthread+0x3c/0x70
[ 2942.501241]  [<c014e8d0>] ? kthread+0x0/0x70
[ 2942.501252]  [<c0105477>] kernel_thread_helper+0x7/0x10
[ 2942.501262] ---[ end trace f82dbcd00cb2fb8e ]---
[ 2942.501275] ------------[ cut here ]------------
[ 2942.501284] WARNING: at /build/buildd/linux-2.6.28/drivers/usb/serial/usb-serial.c:313 serial_write+0x9f/0xb0()
[ 2942.501298] Modules linked in: usb_storage ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt i915 drm binfmt_misc bridge stp bnep input_polldev i8k sbp2 lp parport arc4 ecb joydev snd_hda_intel snd_pcm_oss snd_mixer_oss iwl3945 snd_pcm mac80211 led_class snd_timer snd soundcore intel_agp agpgart iTCO_wdt iTCO_vendor_support option cfg80211 snd_page_alloc video sdhci_pci sdhci psmouse dcdbas output pcspkr serio_raw sha256_generic aes_i586 aes_generic cbc ohci1394 ieee1394 b44 ssb mii dm_crypt fbcon tileblit font bitblit softcursor
[ 2942.501445] Pid: 4, comm: ksoftirqd/0 Tainted: G        W  2.6.28-11-generic #38-Ubuntu
[ 2942.501458] Call Trace:
[ 2942.501465]  [<c0500e56>] ? printk+0x18/0x1a
[ 2942.501477]  [<c0139b24>] warn_on_slowpath+0x54/0x80
[ 2942.501489]  [<c0139b2d>] ? warn_on_slowpath+0x5d/0x80
[ 2942.501502]  [<c01442cf>] ? del_timer+0x4f/0x60
[ 2942.501515]  [<c03d4a10>] ? uhci_urb_enqueue+0x50/0x300
[ 2942.501527]  [<c03b8624>] ? usb_hcd_submit_urb+0x74/0x180
[ 2942.501540]  [<c042bc78>] ? skb_release_data+0x68/0xa0
[ 2942.501552]  [<c03d688f>] serial_write+0x9f/0xb0
[ 2942.501567]  [<f83f3c6b>] ppp_async_push+0xeb/0x130 [ppp_async]
[ 2942.501582]  [<f83f3cc8>] ppp_async_send+0x18/0x50 [ppp_async]
[ 2942.501594]  [<c035f7e9>] ppp_push+0x49/0xa0
[ 2942.501606]  [<c0360acf>] ppp_xmit_process+0x2f/0xa0
[ 2942.501618]  [<c0360d56>] ppp_channel_push+0x76/0xa0
[ 2942.501630]  [<c0360d8f>] ppp_output_wakeup+0xf/0x20
[ 2942.501643]  [<f83f4308>] ppp_async_process+0x78/0x80 [ppp_async]
[ 2942.501657]  [<c013ed18>] tasklet_action+0x78/0x100
[ 2942.501670]  [<c013f197>] __do_softirq+0x97/0x170
[ 2942.501683]  [<c013f2cd>] do_softirq+0x5d/0x60
[ 2942.501695]  [<c013f35a>] ksoftirqd+0x8a/0x120
[ 2942.501708]  [<c013f2d0>] ? ksoftirqd+0x0/0x120
[ 2942.501720]  [<c014e90c>] kthread+0x3c/0x70
[ 2942.501731]  [<c014e8d0>] ? kthread+0x0/0x70
[ 2942.501743]  [<c0105477>] kernel_thread_helper+0x7/0x10
[ 2942.501752] ---[ end trace f82dbcd00cb2fb8e ]---
[ 2942.501763] ------------[ cut here ]------------
[ 2942.501772] WARNING: at /build/buildd/linux-2.6.28/drivers/usb/serial/usb-serial.c:313 serial_write+0x9f/0xb0()
[ 2942.501787] Modules linked in: usb_storage ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt i915 drm binfmt_misc bridge stp bnep input_polldev i8k sbp2 lp parport arc4 ecb joydev snd_hda_intel snd_pcm_oss snd_mixer_oss iwl3945 snd_pcm mac80211 led_class snd_timer snd soundcore intel_agp agpgart iTCO_wdt iTCO_vendor_support option cfg80211 snd_page_alloc video sdhci_pci sdhci psmouse dcdbas output pcspkr serio_raw sha256_generic aes_i586 aes_generic cbc ohci1394 ieee1394 b44 ssb mii dm_crypt fbcon tileblit font bitblit softcursor
[ 2942.501948] Pid: 4, comm: ksoftirqd/0 Tainted: G        W  2.6.28-11-generic #38-Ubuntu
[ 2942.501960] Call Trace:
[ 2942.501967]  [<c0500e56>] ? printk+0x18/0x1a
[ 2942.501979]  [<c0139b24>] warn_on_slowpath+0x54/0x80
[ 2942.501992]  [<c0139b2d>] ? warn_on_slowpath+0x5d/0x80
[ 2942.502005]  [<c01442cf>] ? del_timer+0x4f/0x60
[ 2942.502018]  [<c03d4a10>] ? uhci_urb_enqueue+0x50/0x300
[ 2942.502030]  [<c03b8624>] ? usb_hcd_submit_urb+0x74/0x180
[ 2942.502043]  [<c03d688f>] serial_write+0x9f/0xb0
[ 2942.502057]  [<f83f3c6b>] ppp_async_push+0xeb/0x130 [ppp_async]
[ 2942.502071]  [<f83f3ce9>] ppp_async_send+0x39/0x50 [ppp_async]
[ 2942.502084]  [<c035f7e9>] ppp_push+0x49/0xa0
[ 2942.502096]  [<c0360acf>] ppp_xmit_process+0x2f/0xa0
[ 2942.502108]  [<c0360d56>] ppp_channel_push+0x76/0xa0
[ 2942.502120]  [<c0360d8f>] ppp_output_wakeup+0xf/0x20
[ 2942.502134]  [<f83f4308>] ppp_async_process+0x78/0x80 [ppp_async]
[ 2942.502148]  [<c013ed18>] tasklet_action+0x78/0x100
[ 2942.502161]  [<c013f197>] __do_softirq+0x97/0x170
[ 2942.502174]  [<c013f2cd>] do_softirq+0x5d/0x60
[ 2942.502186]  [<c013f35a>] ksoftirqd+0x8a/0x120
[ 2942.502198]  [<c013f2d0>] ? ksoftirqd+0x0/0x120
[ 2942.502210]  [<c014e90c>] kthread+0x3c/0x70
[ 2942.502221]  [<c014e8d0>] ? kthread+0x0/0x70
[ 2942.502233]  [<c0105477>] kernel_thread_helper+0x7/0x10
[ 2942.502243] ---[ end trace f82dbcd00cb2fb8e ]---
[ 2942.502260] ------------[ cut here ]------------
[ 2942.502270] WARNING: at /build/buildd/linux-2.6.28/drivers/usb/serial/usb-serial.c:313 serial_write+0x9f/0xb0()
[ 2942.502284] Modules linked in: usb_storage ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt i915 drm binfmt_misc bridge stp bnep input_polldev i8k sbp2 lp parport arc4 ecb joydev snd_hda_intel snd_pcm_oss snd_mixer_oss iwl3945 snd_pcm mac80211 led_class snd_timer snd soundcore intel_agp agpgart iTCO_wdt iTCO_vendor_support option cfg80211 snd_page_alloc video sdhci_pci sdhci psmouse dcdbas output pcspkr serio_raw sha256_generic aes_i586 aes_generic cbc ohci1394 ieee1394 b44 ssb mii dm_crypt fbcon tileblit font bitblit softcursor
[ 2942.502430] Pid: 4, comm: ksoftirqd/0 Tainted: G        W  2.6.28-11-generic #38-Ubuntu
[ 2942.502442] Call Trace:
[ 2942.502449]  [<c0500e56>] ? printk+0x18/0x1a
[ 2942.502461]  [<c0139b24>] warn_on_slowpath+0x54/0x80
[ 2942.502474]  [<c01442cf>] ? del_timer+0x4f/0x60
[ 2942.502487]  [<c03d4a10>] ? uhci_urb_enqueue+0x50/0x300
[ 2942.502500]  [<c03b8624>] ? usb_hcd_submit_urb+0x74/0x180
[ 2942.502513]  [<c03b8b1f>] ? usb_submit_urb+0xff/0x260
[ 2942.502533]  [<f7d75624>] ? option_write+0xf4/0x220 [option]
[ 2942.502546]  [<c042c182>] ? skb_release_all+0x12/0x20
[ 2942.502558]  [<c042bb2b>] ? __kfree_skb+0xb/0x80
[ 2942.502569]  [<c03d688f>] serial_write+0x9f/0xb0
[ 2942.502583]  [<f83f3c6b>] ppp_async_push+0xeb/0x130 [ppp_async]
[ 2942.502598]  [<f83f3ce9>] ppp_async_send+0x39/0x50 [ppp_async]
[ 2942.502611]  [<c035f7e9>] ppp_push+0x49/0xa0
[ 2942.502622]  [<c0360acf>] ppp_xmit_process+0x2f/0xa0
[ 2942.502634]  [<c0360d56>] ppp_channel_push+0x76/0xa0
[ 2942.502646]  [<c0360d8f>] ppp_output_wakeup+0xf/0x20
[ 2942.502659]  [<f83f4308>] ppp_async_process+0x78/0x80 [ppp_async]
[ 2942.502674]  [<c013ed18>] tasklet_action+0x78/0x100
[ 2942.502687]  [<c013f197>] __do_softirq+0x97/0x170
[ 2942.502700]  [<c013f2cd>] do_softirq+0x5d/0x60
[ 2942.502712]  [<c013f35a>] ksoftirqd+0x8a/0x120
[ 2942.502724]  [<c013f2d0>] ? ksoftirqd+0x0/0x120
[ 2942.502736]  [<c014e90c>] kthread+0x3c/0x70
[ 2942.502747]  [<c014e8d0>] ? kthread+0x0/0x70
[ 2942.502759]  [<c0105477>] kernel_thread_helper+0x7/0x10
[ 2942.502769] ---[ end trace f82dbcd00cb2fb8e ]---
[ 2942.502977] ------------[ cut here ]------------
[ 2942.502983] WARNING: at /build/buildd/linux-2.6.28/drivers/usb/serial/usb-serial.c:313 serial_write+0x9f/0xb0()
[ 2942.502989] Modules linked in: usb_storage ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt i915 drm binfmt_misc bridge stp bnep input_polldev i8k sbp2 lp parport arc4 ecb joydev snd_hda_intel snd_pcm_oss snd_mixer_oss iwl3945 snd_pcm mac80211 led_class snd_timer snd soundcore intel_agp agpgart iTCO_wdt iTCO_vendor_support option cfg80211 snd_page_alloc video sdhci_pci sdhci psmouse dcdbas output pcspkr serio_raw sha256_generic aes_i586 aes_generic cbc ohci1394 ieee1394 b44 ssb mii dm_crypt fbcon tileblit font bitblit softcursor
[ 2942.503105] Pid: 4, comm: ksoftirqd/0 Tainted: G        W  2.6.28-11-generic #38-Ubuntu
[ 2942.503118] Call Trace:
[ 2942.503126]  [<c0500e56>] ? printk+0x18/0x1a
[ 2942.503138]  [<c0139b24>] warn_on_slowpath+0x54/0x80
[ 2942.503151]  [<c0132168>] ? enqueue_task_fair+0x68/0x70
[ 2942.503164]  [<c01287a7>] ? enqueue_task+0x57/0x70
[ 2942.503177]  [<c0133b74>] ? try_to_wake_up+0x104/0x290
[ 2942.503190]  [<c0127c8d>] ? update_curr+0x8d/0x1e0
[ 2942.503201]  [<c03d688f>] serial_write+0x9f/0xb0
[ 2942.503225]  [<f83f3c6b>] ppp_async_push+0xeb/0x130 [ppp_async]
[ 2942.503240]  [<f83f42fd>] ppp_async_process+0x6d/0x80 [ppp_async]
[ 2942.503255]  [<c013ed18>] tasklet_action+0x78/0x100
[ 2942.503268]  [<c013f197>] __do_softirq+0x97/0x170
[ 2942.503281]  [<c013f2cd>] do_softirq+0x5d/0x60
[ 2942.503293]  [<c013f35a>] ksoftirqd+0x8a/0x120
[ 2942.503306]  [<c013f2d0>] ? ksoftirqd+0x0/0x120
[ 2942.503318]  [<c014e90c>] kthread+0x3c/0x70
[ 2942.503329]  [<c014e8d0>] ? kthread+0x0/0x70
[ 2942.503341]  [<c0105477>] kernel_thread_helper+0x7/0x10
[ 2942.503351] ---[ end trace f82dbcd00cb2fb8e ]---
[ 2942.688119] usb 2-1: USB disconnect, address 4
[ 2942.692200] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 2942.692225] option 2-1:1.0: device disconnected
[ 2942.692518] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 2942.692539] option 2-1:1.1: device disconnected
[ 2942.692828] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 2942.692849] option 2-1:1.2: device disconnected
[ 2964.217693] wlan0: authenticate with AP 00:1d:7e:d4:61:91
[ 2964.219670] wlan0: authenticated
[ 2964.219677] wlan0: associate with AP 00:1d:7e:d4:61:91
[ 2964.233035] wlan0: RX AssocResp from 00:1d:7e:d4:61:91 (capab=0x411 status=0 aid=2)
[ 2964.233044] wlan0: associated
[ 2964.243903] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2974.600082] wlan0: no IPv6 routers present