[4294667.296000] Linux version 2.6.15-18-k7 (buildd@rothera) (gcc version 4.0.3 20060304 (prerelease) (Ubuntu 4.0.2-10ubuntu1)) #1 SMP PREEMPT Thu Mar 9 16:18:01 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000d0000 - 00000000000d6000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
[4294667.296000]  BIOS-e820: 000000001dff0000 - 000000001dff8000 (ACPI data)
[4294667.296000]  BIOS-e820: 000000001dff8000 - 000000001e000000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 479MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 122864
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 118768 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 AMI                                   ) @ 0x000fa2d0
[4294667.296000] ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x1dff0000
[4294667.296000] ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x1dff0030
[4294667.296000] ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 INTL 0x02002024) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e1f80000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda2 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (0147b000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1659.092 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294669.718000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.719000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.740000] Memory: 475912k/491456k available (2081k kernel code, 14940k reserved, 593k data, 328k init, 0k highmem)
[4294669.740000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294669.800000] Calibrating delay using timer specific routine.. 3319.98 BogoMIPS (lpj=1659992)
[4294669.800000] Security Framework v1.0.0 initialized
[4294669.800000] SELinux:  Disabled at boot.
[4294669.800000] Mount-cache hash table entries: 512
[4294669.800000] CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[4294669.800000] CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[4294669.800000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294669.800000] CPU: L2 Cache: 512K (64 bytes/line)
[4294669.800000] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
[4294669.800000] mtrr: v2.0 (20020519)
[4294669.800000] Enabling fast FPU save and restore... done.
[4294669.800000] Enabling unmasked SIMD FPU exception support... done.
[4294669.800000] Checking 'hlt' instruction... OK.
[4294669.804000] SMP alternatives: switching to UP code
[4294669.804000] checking if image is initramfs... it is
[4294670.432000] Freeing initrd memory: 6478k freed
[4294670.448000] ACPI: Looking for DSDT ... not found!
[4294670.451000] ACPI: setting ELCR to 0200 (from 0c00)
[4294670.463000] CPU0: AMD mobile AMD Athlon(tm) XP-M (LV) 2200+ stepping 00
[4294670.463000] SMP motherboard not detected.
[4294670.463000] Local APIC not detected. Using dummy APIC emulation.
[4294670.463000] Brought up 1 CPUs
[4294670.463000] NET: Registered protocol family 16
[4294670.463000] EISA bus registered
[4294670.463000] ACPI: bus type pci registered
[4294670.464000] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
[4294670.464000] PCI: Using configuration type 1
[4294670.464000] ACPI: Subsystem revision 20051216
[4294670.470000] ACPI: Interpreter enabled
[4294670.470000] ACPI: Using PIC for interrupt routing
[4294670.470000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.470000] PCI: Probing PCI hardware (bus 00)
[4294670.472000] PCI quirk: region 0800-087f claimed by vt8235 PM
[4294670.472000] PCI quirk: region 0400-040f claimed by vt8235 SMB
[4294670.472000] Boot video device is 0000:01:00.0
[4294670.472000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.477000] ACPI: Embedded Controller [ECD] (gpe 4) interrupt mode.
[4294670.478000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[4294670.480000] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *11 14 15)
[4294670.480000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 9 14 15) *0, disabled.
[4294670.480000] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
[4294670.481000] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7) *0, disabled.
[4294670.481000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.481000] pnp: PnP ACPI init
[4294670.481000] pnp: PnPACPI: unknown resource type 7
[4294670.481000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294670.481000] pnp: PnPACPI: unknown resource type 7
[4294670.481000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294670.481000] pnp: PnPACPI: unknown resource type 7
[4294670.481000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294670.481000] pnp: PnPACPI: unknown resource type 7
[4294670.481000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294670.481000] pnp: PnPACPI: unknown resource type 7
[4294670.481000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294670.481000] pnp: PnPACPI: unknown resource type 7
[4294670.481000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0f13
[4294670.481000] pnp: PnPACPI: unknown resource type 7
[4294670.481000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294670.482000] pnp: PnPACPI: unknown resource type 7
[4294670.482000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294670.482000] pnp: PnP ACPI: found 0 devices
[4294670.482000] PnPBIOS: Disabled by ACPI PNP
[4294670.482000] PCI: Using ACPI for IRQ routing
[4294670.482000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294670.485000] PCI: Bridge: 0000:00:01.0
[4294670.485000]   IO window: disabled.
[4294670.485000]   MEM window: dde00000-dfefffff
[4294670.485000]   PREFETCH window: d5d00000-ddcfffff
[4294670.485000] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[4294670.485000]   IO window: 00001000-000010ff
[4294670.486000]   IO window: 00001400-000014ff
[4294670.486000]   PREFETCH window: 20000000-21ffffff
[4294670.486000]   MEM window: 22000000-23ffffff
[4294670.486000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294670.486000] **** SET: Misaligned resource pointer: dde61da2 Type 07 Len 0
[4294670.486000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[4294670.486000] PCI: setting IRQ 10 as level-triggered
[4294670.486000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294670.486000] audit: initializing netlink socket (disabled)
[4294670.486000] audit(1142320511.484:1): initialized
[4294670.486000] VFS: Disk quotas dquot_6.5.1
[4294670.487000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.487000] Initializing Cryptographic API
[4294670.487000] io scheduler noop registered
[4294670.487000] io scheduler anticipatory registered
[4294670.487000] io scheduler deadline registered
[4294670.487000] io scheduler cfq registered
[4294670.487000] isapnp: Scanning for PnP cards...
[4294670.844000] isapnp: No Plug & Play device found
[4294670.860000] PNP: No PS/2 controller found. Probing ports directly.
[4294670.862000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294670.863000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294670.864000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294670.864000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294670.864000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294670.864000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.864000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[4294670.865000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294670.865000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.865000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.865000] ACPI: bus type ide registered
[4294670.865000] mice: PS/2 mouse device common for all mice
[4294670.866000] EISA: Probing bus 0 at eisa.0
[4294670.866000] Cannot allocate resource for EISA slot 1
[4294670.866000] EISA: Detected 0 cards.
[4294670.866000] NET: Registered protocol family 2
[4294670.875000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294670.875000] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[4294670.875000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[4294670.876000] TCP: Hash tables configured (established 16384 bind 16384)
[4294670.876000] TCP reno registered
[4294670.876000] TCP bic registered
[4294670.876000] NET: Registered protocol family 1
[4294670.876000] NET: Registered protocol family 8
[4294670.876000] NET: Registered protocol family 20
[4294670.876000] Using IPI No-Shortcut mode
[4294670.876000] ACPI wakeup devices: 
[4294670.876000] SLPB PCI0 USB1 USB2 USB3 EHCI  MC9 ILAN 
[4294670.876000] ACPI: (supports S0 S3 S4 S5)
[4294670.876000] Freeing unused kernel memory: 328k freed
[4294670.961000] vga16fb: initializing
[4294670.961000] vga16fb: mapped to 0xc00a0000
[4294671.024000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.101000] Console: switching to colour frame buffer device 80x25
[4294671.101000] fb0: VGA16 VGA frame buffer device
[4294672.240000] Capability LSM initialized
[4294672.282000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294672.408000] ACPI: Thermal Zone [THRM] (0 C)
[4294672.803000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294672.803000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[4294672.803000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[4294672.803000] VP_IDE: chipset revision 6
[4294672.803000] VP_IDE: not 100% native mode: will probe irqs later
[4294672.803000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[4294672.803000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[4294672.803000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[4294672.803000] Probing IDE interface ide0...
[4294673.189000] hda: IC25N080ATMR04-0, ATA DISK drive
[4294673.495000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.495000] Probing IDE interface ide1...
[4294674.289000] hdc: QSI DVDRW SDW-042, ATAPI CD/DVD-ROM drive
[4294674.901000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.908000] hda: max request size: 1024KiB
[4294674.929000] hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
[4294674.929000] hda: cache flushes supported
[4294674.930000]  hda: hda1 hda2 hda3 < hda5 >
[4294674.985000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294674.985000] Uniform CD-ROM driver Revision: 3.20
[4294675.426000] usbcore: registered new driver usbfs
[4294675.427000] usbcore: registered new driver hub
[4294675.429000] USB Universal Host Controller Interface driver v2.3
[4294675.429000] **** SET: Misaligned resource pointer: ddd0fc62 Type 07 Len 0
[4294675.429000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
[4294675.429000] PCI: setting IRQ 7 as level-triggered
[4294675.429000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294675.429000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 7
[4294675.429000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294675.430000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294675.430000] uhci_hcd 0000:00:10.0: irq 7, io base 0x0000e400
[4294675.430000] hub 1-0:1.0: USB hub found
[4294675.430000] hub 1-0:1.0: 2 ports detected
[4294675.531000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294675.531000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 7
[4294675.531000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294675.531000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294675.531000] uhci_hcd 0000:00:10.1: irq 7, io base 0x0000e800
[4294675.531000] hub 2-0:1.0: USB hub found
[4294675.531000] hub 2-0:1.0: 2 ports detected
[4294675.632000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294675.632000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 7
[4294675.632000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294675.632000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294675.632000] uhci_hcd 0000:00:10.2: irq 7, io base 0x0000ec00
[4294675.632000] hub 3-0:1.0: USB hub found
[4294675.632000] hub 3-0:1.0: 2 ports detected
[4294675.735000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294675.735000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 7
[4294675.735000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[4294675.735000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294675.735000] ehci_hcd 0000:00:10.3: irq 7, io mem 0xdfffdf00
[4294675.735000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294675.736000] hub 4-0:1.0: USB hub found
[4294675.736000] hub 4-0:1.0: 6 ports detected
[4294676.085000] Attempting manual resume
[4294676.153000] EXT3-fs: INFO: recovery required on readonly filesystem.
[4294676.153000] EXT3-fs: write access will be enabled during recovery.
[4294676.465000] usb 4-2: new high speed USB device using ehci_hcd and address 2
[4294676.611000] SCSI subsystem initialized
[4294676.613000] Initializing USB Mass Storage driver...
[4294676.614000] scsi0 : SCSI emulation for USB Mass Storage devices
[4294676.614000] usb-storage: device found at 2
[4294676.614000] usb-storage: waiting for device to settle before scanning
[4294676.614000] usbcore: registered new driver usb-storage
[4294676.614000] USB Mass Storage support registered.
[4294680.017000] EXT3-fs: recovery complete.
[4294680.017000] kjournald starting.  Commit interval 5 seconds
[4294680.018000] EXT3-fs: mounted filesystem with ordered data mode.
[4294681.615000]   Vendor: Generic   Model: STORAGE DEVICE    Rev: 0125
[4294681.615000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[4294681.615000] usb-storage: device scan complete
[4294686.113000] SCSI device sda: 29120 512-byte hdwr sectors (15 MB)
[4294686.115000] sda: Write Protect is off
[4294686.115000] sda: Mode Sense: 02 00 00 00
[4294686.115000] sda: assuming drive cache: write through
[4294686.118000] SCSI device sda: 29120 512-byte hdwr sectors (15 MB)
[4294686.119000] sda: Write Protect is off
[4294686.119000] sda: Mode Sense: 02 00 00 00
[4294686.119000] sda: assuming drive cache: write through
[4294686.119000]  sda: sda1
[4294686.123000] sd 0:0:0:0: Attached scsi removable disk sda
[4294686.157000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294688.076000] irda_init()
[4294688.076000] NET: Registered protocol family 23
[4294688.372000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294688.372000] Yenta: CardBus bridge found at 0000:00:0a.0 [14ff:c602]
[4294688.372000] Yenta O2: res at 0x94/0xD4: 00/ea
[4294688.372000] Yenta O2: enabling read prefetch/write burst
[4294688.393000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294688.494000] Yenta: ISA IRQ mask 0x0038, PCI irq 10
[4294688.494000] Socket status: 30000007
[4294688.495000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294688.506000] **** SET: Misaligned resource pointer: da3eba82 Type 07 Len 0
[4294688.506000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294688.506000] PCI: setting IRQ 11 as level-triggered
[4294688.506000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294688.506000] rt2500 1.1.0 BETA3 2005/07/31 http://rt2x00.serialmonkey.com
[4294688.759000] Linux agpgart interface v0.101 (c) Dave Jones
[4294688.811000] agpgart: Detected VIA KM400/KM400A chipset
[4294688.816000] agpgart: AGP aperture is 64M @ 0xe0000000
[4294688.922000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294688.922000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294688.926000] eth0: VIA Rhine II at 0x1d800, 00:40:45:24:e1:6d, IRQ 11.
[4294688.927000] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
[4294689.140000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294689.141000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294689.508000] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0
[4294689.548000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[4294689.730000] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294689.731000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[4294689.757000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294689.936000] ts: Compaq touchscreen protocol output
[4294690.225000] cs: IO port probe 0x100-0x3af: clean.
[4294690.227000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[4294690.228000] cs: IO port probe 0x820-0x8ff: clean.
[4294690.229000] cs: IO port probe 0xc00-0xcf7: clean.
[4294690.230000] cs: IO port probe 0xa00-0xaff: clean.
[4294690.851000] NET: Registered protocol family 17
[4294690.853000] lp: driver loaded but no devices found
[4294691.015000] Adding 1413680k swap on /dev/hda5.  Priority:-1 extents:1 across:1413680k
[4294692.178000] EXT3 FS on hda2, internal journal
[4294692.339000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294692.339000] md: bitmap version 4.39
[4294693.068000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294693.846000] cdrom: open failed.
[4294694.974000] NET: Registered protocol family 10
[4294694.974000] lo: Disabled Privacy Extensions
[4294694.974000] IPv6 over IPv4 tunneling driver
[4294696.859000] ACPI: AC Adapter [AC] (on-line)
[4294696.904000] ACPI: Battery Slot [BAT0] (battery present)
[4294696.992000] ACPI: Power Button (FF) [PWRF]
[4294696.992000] ACPI: Power Button (CM) [PWRB]
[4294696.992000] ACPI: Sleep Button (CM) [SLPB]
[4294696.992000] ACPI: Lid Switch [LIDD]
[4294697.106000] ibm_acpi: ec object not found
[4294697.242000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[4294697.719000] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
[4294697.723000] powernow: SGTC: 13333
[4294697.723000] powernow: Minimum speed 398 MHz. Maximum speed 1659 MHz.
[4294702.525000] [drm] Initialized drm 1.0.0 20040925
[4294702.537000] **** SET: Misaligned resource pointer: dcbb3de2 Type 07 Len 0
[4294702.538000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[4294702.538000] PCI: setting IRQ 9 as level-triggered
[4294702.538000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[4294702.538000] PCI: Via IRQ fixup for 0000:01:00.0, from 11 to 9
[4294702.539000] [drm] Initialized via 2.6.3 20050523 on minor 0: 
[4294702.540000] mtrr: 0xd8000000,0x2000000 overlaps existing 0xd8000000,0x200000
[4294702.646000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294702.646000] agpgart: Device is in legacy mode, falling back to 2.x
[4294702.646000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4294702.646000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4294703.809000] irq 11: nobody cared (try booting with the "irqpoll" option)
[4294703.809000]  [<c014b70a>] __report_bad_irq+0x2a/0x90
[4294703.809000]  [<c014aedd>] handle_IRQ_event+0x3d/0x70
[4294703.809000]  [<c014b817>] note_interrupt+0x87/0xe0
[4294703.809000]  [<c014b00c>] __do_IRQ+0xfc/0x110
[4294703.809000]  [<c0105c09>] do_IRQ+0x19/0x30
[4294703.809000]  [<c0103eb6>] common_interrupt+0x1a/0x20
[4294703.809000]  [<c012a163>] __do_softirq+0x63/0xe0
[4294703.809000]  [<c012a215>] do_softirq+0x35/0x40
[4294703.809000]  [<c012a2f5>] irq_exit+0x45/0x50
[4294703.809000]  [<c0105c0e>] do_IRQ+0x1e/0x30
[4294703.809000]  [<c0103eb6>] common_interrupt+0x1a/0x20
[4294703.809000] handlers:
[4294703.809000] [<dea9d940>] (rhine_interrupt+0x0/0x270 [via_rhine])
[4294703.809000] Disabling IRQ #11
[4294705.809000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294705.810000] apm: overridden by ACPI.
[4294705.966000] eth0: no IPv6 routers present
[4294706.299000] ra0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
[4294708.829000] hdc: drive_cmd: status=0x41 { DriveReady Error }
[4294708.829000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294708.829000] ide: failed opcode was: 0xec
[4294709.008000] hdc: drive_cmd: status=0x41 { DriveReady Error }
[4294709.008000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294709.008000] ide: failed opcode was: 0xec
[4294709.614000] Bluetooth: Core ver 2.8
[4294709.614000] NET: Registered protocol family 31
[4294709.614000] Bluetooth: HCI device and connection manager initialized
[4294709.614000] Bluetooth: HCI socket layer initialized
[4294709.679000] Bluetooth: L2CAP ver 2.8
[4294709.679000] Bluetooth: L2CAP socket layer initialized
[4294709.683000] Bluetooth: RFCOMM socket layer initialized
[4294709.683000] Bluetooth: RFCOMM TTY layer initialized
[4294709.683000] Bluetooth: RFCOMM ver 1.7
[4294737.465000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!