Kernel panic - 2.6.24-23-server
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Expired
|
Undecided
|
Unassigned |
Bug Description
On a Ubuntu 8.04.02 server 64-bit I get a "kernel panic - not syncing aiee".
This kernel panic is coming when connecting to a external FTP server, not when booting.
Booting with acpi=off is giving the same error.
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-server (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Jan 26 01:36:05 UTC 2009 (Ubuntu 2.6.24-
[ 0.000000] Command line: root=/dev/md3 ro quiet splash acpi=off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007faa0000 (usable)
[ 0.000000] BIOS-e820: 000000007faa0000 - 000000007fab6000 (reserved)
[ 0.000000] BIOS-e820: 000000007fab6000 - 000000007fad5c00 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fad5c00 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 522912) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.5 present.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 000000000000000
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 522912) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 000000000000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 160
[ 0.000000] 0: 256 -> 522912
[ 0.000000] On node 0 totalpages: 522816
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1324 pages reserved
[ 0.000000] DMA zone: 2620 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7093 pages used for memmap
[ 0.000000] DMA32 zone: 511723 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: DELL MPTABLE: Product ID: PE 020F MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #2
[ 0.000000] Processor #3
[ 0.000000] Processor #1
[ 0.000000] I/O APIC #4 at 0xFEC00000.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Processors: 4
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 41952 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514343
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/md3 ro quiet splash acpi=off
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PIT
[ 0.000000] time.c: Detected 2833.371 MHz processor.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Checking aperture...
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2049440k/2091648k available (2526k kernel code, 41824k reserved, 1329k data, 328k init)
[ 0.000000] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
[ 0.000000] Calibrating delay using timer specific routine.. 5669.91 BogoMIPS (lpj=28349570)
[ 0.000000] Security Framework initialized
[ 0.000000] SELinux: Disabled at boot.
[ 0.000000] AppArmor: AppArmor initialized
[ 0.000000] Failure registering capabilities with primary security module.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Mount-cache hash table entries: 256
[ 0.000000] Initializing cgroup subsys ns
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000000] CPU: L2 cache: 6144K
[ 0.000000] CPU 0/0 -> Node 0
[ 0.000000] using mwait in idle threads.
[ 0.000000] CPU: Physical Processor ID: 0
[ 0.000000] CPU: Processor Core ID: 0
[ 0.000000] CPU0: Thermal monitoring enabled (TM1)
[ 0.000000] SMP alternatives: switching to UP code
[ 0.000000] Early unpacking initramfs... done
[ 0.000000] ExtINT not setup in hardware but reported by MP table
[ 0.000000] Using local APIC timer interrupts.
[ 0.000000] APIC timer calibration result 20833606
[ 0.000000] Detected 20.833 MHz APIC timer.
[ 0.000000] SMP alternatives: switching to SMP code
[ 0.000000] Booting processor 1/4 APIC 0x2
[ 0.000000] Initializing CPU#1
[ 0.000000] Calibrating delay using timer specific routine.. 5666.79 BogoMIPS (lpj=28333990)
[ 0.000000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000000] CPU: L2 cache: 6144K
[ 0.000000] CPU 1/2 -> Node 0
[ 0.000000] CPU: Physical Processor ID: 0
[ 0.000000] CPU: Processor Core ID: 2
[ 0.000000] CPU1: Thermal monitoring enabled (TM1)
[ 0.000000] Intel(R) Xeon(R) CPU X3363 @ 2.83GHz stepping 0a
[ 0.000000] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.000000] SMP alternatives: switching to SMP code
[ 0.000000] Booting processor 2/4 APIC 0x3
[ 0.000000] Initializing CPU#2
[ 0.000000] Calibrating delay using timer specific routine.. 5666.83 BogoMIPS (lpj=28334195)
[ 0.000000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000000] CPU: L2 cache: 6144K
[ 0.000000] CPU 2/3 -> Node 0
[ 0.000000] CPU: Physical Processor ID: 0
[ 0.000000] CPU: Processor Core ID: 3
[ 0.000000] CPU2: Thermal monitoring enabled (TM1)
[ 0.000000] Intel(R) Xeon(R) CPU X3363 @ 2.83GHz stepping 0a
[ 0.000000] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.000000] SMP alternatives: switching to SMP code
[ 0.000000] Booting processor 3/4 APIC 0x1
[ 0.000000] Initializing CPU#3
[ 0.000000] Calibrating delay using timer specific routine.. 5666.78 BogoMIPS (lpj=28333908)
[ 0.000000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000000] CPU: L2 cache: 6144K
[ 0.000000] CPU 3/1 -> Node 0
[ 0.000000] CPU: Physical Processor ID: 0
[ 0.000000] CPU: Processor Core ID: 1
[ 0.000000] CPU3: Thermal monitoring enabled (TM1)
[ 0.000000] Intel(R) Xeon(R) CPU X3363 @ 2.83GHz stepping 0a
[ 0.000000] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.000000] Brought up 4 CPUs
[ 0.000000] CPU0 attaching sched-domain:
[ 0.000000] domain 0: span 00000000,00000009
[ 0.000000] groups: 00000000,00000001 00000000,00000008
[ 0.000000] domain 1: span 00000000,0000000f
[ 0.000000] groups: 00000000,00000009 00000000,00000006
[ 0.000000] domain 2: span 00000000,0000000f
[ 0.000000] groups: 00000000,0000000f
[ 0.000000] CPU1 attaching sched-domain:
[ 0.000000] domain 0: span 00000000,00000006
[ 0.000000] groups: 00000000,00000002 00000000,00000004
[ 0.000000] domain 1: span 00000000,0000000f
[ 0.000000] groups: 00000000,00000006 00000000,00000009
[ 0.000000] domain 2: span 00000000,0000000f
[ 0.000000] groups: 00000000,0000000f
[ 0.000000] CPU2 attaching sched-domain:
[ 0.000000] domain 0: span 00000000,00000006
[ 0.000000] groups: 00000000,00000004 00000000,00000002
[ 0.000000] domain 1: span 00000000,0000000f
[ 0.000000] groups: 00000000,00000006 00000000,00000009
[ 0.000000] domain 2: span 00000000,0000000f
[ 0.000000] groups: 00000000,0000000f
[ 0.000000] CPU3 attaching sched-domain:
[ 0.000000] domain 0: span 00000000,00000009
[ 0.000000] groups: 00000000,00000008 00000000,00000001
[ 0.000000] domain 1: span 00000000,0000000f
[ 0.000000] groups: 00000000,00000009 00000000,00000006
[ 0.000000] domain 2: span 00000000,0000000f
[ 0.000000] groups: 00000000,0000000f
[ 0.000000] net_namespace: 120 bytes
[ 0.000000] Time: 13:33:17 Date: 03/12/09
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] PCI: Using configuration type 1
[ 0.000000] ACPI: Interpreter disabled.
[ 0.000000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.000000] pnp: PnP ACPI: disabled
[ 0.000000] PCI: Probing PCI hardware
[ 0.000000] PCI: Probing PCI hardware (bus 00)
[ 0.000000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.000000] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.000000] PCI: Transparent bridge - 0000:00:1e.0
[ 0.000000] PCI: Using IRQ router default [8086/2916] at 0000:00:1f.0
[ 0.000000] PCI->APIC IRQ transform: 0000:00:00.0[A] -> IRQ 16
[ 0.000000] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
[ 0.000000] PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 16
[ 0.000000] PCI->APIC IRQ transform: 0000:00:06.0[A] -> IRQ 16
[ 0.000000] PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 16
[ 0.000000] PCI->APIC IRQ transform: 0000:00:1c.4[A] -> IRQ 16
[ 0.000000] PCI->APIC IRQ transform: 0000:00:1c.5[b] -> IRQ 17
[ 0.000000] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 21
[ 0.000000] PCI->APIC IRQ transform: 0000:00:1d.1[b] -> IRQ 20
[ 0.000000] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 21
[ 0.000000] PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 21
[ 0.000000] PCI->APIC IRQ transform: 0000:00:1f.2[C] -> IRQ 23
[ 0.000000] PCI->APIC IRQ transform: 0000:00:1f.5[D] -> IRQ 22
[ 0.000000] PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 16
[ 0.000000] PCI->APIC IRQ transform: 0000:07:00.0[A] -> IRQ 16
[ 0.000000] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[ 0.000000] PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 17
[ 0.000000] PCI->APIC IRQ transform: 0000:0a:07.0[A] -> IRQ 19
[ 0.000000] NET: Registered protocol family 8
[ 0.000000] NET: Registered protocol family 20
[ 0.000000] NetLabel: Initializing
[ 0.000000] NetLabel: domain hash size = 128
[ 0.000000] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.000000] NetLabel: unlabeled traffic allowed by default
[ 0.000000] PCI-GART: No AMD northbridge found.
[ 0.000000] AppArmor: AppArmor Filesystem Enabled
[ 0.000000] PCI: Bridge: 0000:00:02.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: disabled.
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:03.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: disabled.
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:04.0
[ 0.000000] IO window: e000-efff
[ 0.000000] MEM window: dfa00000-dfbfffff
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:05.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: disabled.
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:06.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: dfc00000-dfcfffff
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:07.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: disabled.
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:1c.0
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: disabled.
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:1c.4
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: dfd00000-dfdfffff
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:1c.5
[ 0.000000] IO window: disabled.
[ 0.000000] MEM window: dfe00000-dfefffff
[ 0.000000] PREFETCH window: disabled.
[ 0.000000] PCI: Bridge: 0000:00:1e.0
[ 0.000000] IO window: d000-dfff
[ 0.000000] MEM window: dff00000-dfffffff
[ 0.000000] PREFETCH window: d0000000-d7ffffff
[ 0.000000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.000000] NET: Registered protocol family 2
[ 0.000000] Time: tsc clocksource has been installed.
[ 0.000000] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.000000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.000000] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.000000] TCP reno registered
[ 0.000000] checking if image is initramfs... it is
[ 0.000000] Freeing initrd memory: 7613k freed
[ 0.000000] audit: initializing netlink socket (disabled)
[ 0.000000] audit(123686479
[ 0.000000] Total HugeTLB memory allocated, 0
[ 0.000000] VFS: Disk quotas dquot_6.5.1
[ 0.000000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.000000] io scheduler noop registered
[ 0.000000] io scheduler anticipatory registered
[ 0.000000] io scheduler deadline registered (default)
[ 0.000000] io scheduler cfq registered
[ 0.000000] Boot video device is 0000:0a:07.0
[ 0.000000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.000000] assign_
[ 0.000000] Allocate Port Service[
[ 0.000000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.000000] assign_
[ 0.000000] Allocate Port Service[
[ 0.000000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.000000] assign_
[ 0.000000] Allocate Port Service[
[ 0.000000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.000000] assign_
[ 0.000000] Allocate Port Service[
[ 0.000000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.000000] assign_
[ 0.000000] Allocate Port Service[
[ 0.000000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.000000] assign_
[ 0.000000] Allocate Port Service[
[ 0.000000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.000000] assign_
[ 0.000000] Allocate Port Service[
[ 0.000000] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.000000] assign_
[ 0.000000] Allocate Port Service[
[ 0.000000] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.000000] assign_
[ 0.000000] Allocate Port Service[
[ 0.000000] Real Time Clock Driver v1.12ac
[ 0.000000] Linux agpgart interface v0.102
[ 0.000000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.000000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.000000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.000000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 0.000000] input: Macintosh mouse button emulation as /devices/
[ 0.000000] PNP: No PS/2 controller found. Probing ports directly.
[ 0.000000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.000000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.000000] mice: PS/2 mouse device common for all mice
[ 0.000000] cpuidle: using governor ladder
[ 0.000000] cpuidle: using governor menu
[ 0.000000] NET: Registered protocol family 1
[ 0.000000] registered taskstats version 1
[ 0.000000] Magic number: 1:290:584
[ 0.000000] hash matches device ptyc2
[ 0.000000] /build/
[ 0.000000] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 0.000000] Freeing unused kernel memory: 328k freed
[ 0.000000] Write protecting the kernel read-only data: 1044k
[ 0.000000] fuse init (API version 7.9)
[ 0.000000] thermal: Unknown symbol acpi_processor_
[ 0.000000] md: linear personality registered for level -1
[ 0.000000] md: multipath personality registered for level -4
[ 0.000000] md: raid0 personality registered for level 0
[ 0.000000] md: raid1 personality registered for level 1
[ 0.000000] xor: automatically using best checksumming function: generic_sse
[ 0.000000] generic_sse: 10834.400 MB/sec
[ 0.000000] xor: using function: generic_sse (10834.400 MB/sec)
[ 0.000000] async_tx: api initialized (async)
[ 0.000000] raid6: int64x1 2507 MB/s
[ 0.000000] raid6: int64x2 3181 MB/s
[ 0.000000] raid6: int64x4 3276 MB/s
[ 0.000000] raid6: int64x8 2617 MB/s
[ 0.000000] raid6: sse2x1 3845 MB/s
[ 0.000000] raid6: sse2x2 7944 MB/s
[ 0.000000] raid6: sse2x4 8807 MB/s
[ 0.000000] raid6: using algorithm sse2x4 (8807 MB/s)
[ 0.000000] md: raid6 personality registered for level 6
[ 0.000000] md: raid5 personality registered for level 5
[ 0.000000] md: raid4 personality registered for level 4
[ 0.000000] md: raid10 personality registered for level 10
[ 0.000000] SCSI subsystem initialized
[ 0.000000] Fusion MPT base driver 3.04.06
[ 0.000000] Copyright (c) 1999-2007 LSI Corporation
[ 0.000000] Fusion MPT SAS Host driver 3.04.06
[ 0.000000] mptbase: ioc0: Initiating bringup
[ 0.000000] usbcore: registered new interface driver usbfs
[ 0.000000] usbcore: registered new interface driver hub
[ 0.000000] usbcore: registered new device driver usb
[ 0.000000] libata version 3.00 loaded.
[ 0.000000] USB Universal Host Controller Interface driver v3.0
[ 0.000000] ioc0: LSISAS1068E B3: Capabilities=
[ 0.000000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 0.000000] scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
[ 0.000000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HE160HJ 0-24 PQ: 0 ANSI: 5
[ 0.000000] scsi 0:0:1:0: Direct-Access ATA SAMSUNG HE160HJ 0-24 PQ: 0 ANSI: 5
[ 0.000000] tg3.c:v3.86 (November 9, 2007)
[ 0.000000] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.000000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.000000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.000000] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.000000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 0.000000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf9ffc00
[ 0.000000] Driver 'sd' needs updating - please use bus_type methods
[ 0.000000] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 0.000000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 0.000000] usb usb1: configuration #1 chosen from 1 choice
[ 0.000000] hub 1-0:1.0: USB hub found
[ 0.000000] hub 1-0:1.0: 6 ports detected
[ 0.000000] eth0: Tigon3 [partno(
[ 0.000000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 0.000000] eth0: dma_rwctrl[
[ 0.000000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 0.000000] sd 0:0:0:0: [sda] Write Protect is off
[ 0.000000] sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 0.000000] eth1: Tigon3 [partno(BCM95722) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:22:19:aa:c6:3b
[ 0.000000] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
[ 0.000000] eth1: dma_rwctrl[
[ 0.000000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 0.000000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.000000] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 0.000000] eth2: Tigon3 [partno(BCM95722) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:22:19:aa:c6:3c
[ 0.000000] eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
[ 0.000000] eth2: dma_rwctrl[
[ 0.000000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.000000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.000000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cc80
[ 0.000000] usb usb2: configuration #1 chosen from 1 choice
[ 0.000000] hub 2-0:1.0: USB hub found
[ 0.000000] hub 2-0:1.0: 2 ports detected
[ 0.000000] sd 0:0:0:0: [sda] Write Protect is off
[ 0.000000] sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 0.000000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.000000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 0.000000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.000000] sd 0:0:1:0: [sdb] 312500000 512-byte hardware sectors (160000 MB)
[ 0.000000] sd 0:0:1:0: [sdb] Write Protect is off
[ 0.000000] sd 0:0:1:0: [sdb] Mode Sense: 73 00 00 08
[ 0.000000] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.000000] sd 0:0:1:0: [sdb] 312500000 512-byte hardware sectors (160000 MB)
[ 0.000000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.000000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.000000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cca0
[ 0.000000] usb usb3: configuration #1 chosen from 1 choice
[ 0.000000] hub 3-0:1.0: USB hub found
[ 0.000000] hub 3-0:1.0: 2 ports detected
[ 0.000000] sd 0:0:1:0: [sdb] Write Protect is off
[ 0.000000] sd 0:0:1:0: [sdb] Mode Sense: 73 00 00 08
[ 0.000000] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.000000] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[ 0.000000] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 0.000000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.000000] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 0.000000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.000000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.000000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ccc0
[ 0.000000] usb usb4: configuration #1 chosen from 1 choice
[ 0.000000] hub 4-0:1.0: USB hub found
[ 0.000000] hub 4-0:1.0: 2 ports detected
[ 0.000000] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 0.000000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.000000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 0.000000] ata_piix 0000:00:1f.2: version 2.12
[ 0.000000] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.000000] md: md0 stopped.
[ 0.000000] usb 1-5: configuration #1 chosen from 1 choice
[ 0.000000] hub 1-5:1.0: USB hub found
[ 0.000000] hub 1-5:1.0: 2 ports detected
[ 0.000000] md: bind<sdb2>
[ 0.000000] md: md1 stopped.
[ 0.000000] md: bind<sdb3>
[ 0.000000] md: md2 stopped.
[ 0.000000] md: bind<sdb5>
[ 0.000000] md: md3 stopped.
[ 0.000000] md: md0 stopped.
[ 0.000000] md: unbind<sdb2>
[ 0.000000] md: export_rdev(sdb2)
[ 0.000000] md: bind<sdb2>
[ 0.000000] md: bind<sda2>
[ 0.000000] md0: setting max_sectors to 128, segment boundary to 32767
[ 0.000000] raid0: looking at sda2
[ 0.000000] raid0: comparing sda2(489856) with sda2(489856)
[ 0.000000] raid0: END
[ 0.000000] raid0: ==> UNIQUE
[ 0.000000] raid0: 1 zones
[ 0.000000] raid0: looking at sdb2
[ 0.000000] raid0: comparing sdb2(489856) with sda2(489856)
[ 0.000000] raid0: EQUAL
[ 0.000000] raid0: FINAL 1 zones
[ 0.000000] raid0: done.
[ 0.000000] raid0 : md_size is 979712 blocks.
[ 0.000000] raid0 : conf->hash_spacing is 979712 blocks.
[ 0.000000] raid0 : nb_zone is 1.
[ 0.000000] raid0 : Allocating 8 bytes for hash.
[ 0.000000] md: md1 stopped.
[ 0.000000] md: unbind<sdb3>
[ 0.000000] md: export_rdev(sdb3)
[ 0.000000] md: bind<sdb3>
[ 0.000000] md: bind<sda3>
[ 0.000000] md1: setting max_sectors to 128, segment boundary to 32767
[ 0.000000] raid0: looking at sda3
[ 0.000000] raid0: comparing sda3(1951808) with sda3(1951808)
[ 0.000000] raid0: END
[ 0.000000] raid0: ==> UNIQUE
[ 0.000000] raid0: 1 zones
[ 0.000000] raid0: looking at sdb3
[ 0.000000] raid0: comparing sdb3(1951808) with sda3(1951808)
[ 0.000000] raid0: EQUAL
[ 0.000000] raid0: FINAL 1 zones
[ 0.000000] raid0: done.
[ 0.000000] raid0 : md_size is 3903616 blocks.
[ 0.000000] raid0 : conf->hash_spacing is 3903616 blocks.
[ 0.000000] raid0 : nb_zone is 1.
[ 0.000000] raid0 : Allocating 8 bytes for hash.
[ 0.000000] md: md2 stopped.
[ 0.000000] md: unbind<sdb5>
[ 0.000000] md: export_rdev(sdb5)
[ 0.000000] md: bind<sdb5>
[ 0.000000] md: bind<sda5>
[ 0.000000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.000000] scsi1 : ata_piix
[ 0.000000] scsi2 : ata_piix
[ 0.000000] ata1: SATA max UDMA/133 cmd 0xcc20 ctl 0xcc10 bmdma 0xcc40 irq 23
[ 0.000000] ata2: SATA max UDMA/133 cmd 0xcc28 ctl 0xcc14 bmdma 0xcc48 irq 23
[ 0.000000] md2: setting max_sectors to 128, segment boundary to 32767
[ 0.000000] raid0: looking at sda5
[ 0.000000] raid0: comparing sda5(489856) with sda5(489856)
[ 0.000000] raid0: END
[ 0.000000] raid0: ==> UNIQUE
[ 0.000000] raid0: 1 zones
[ 0.000000] raid0: looking at sdb5
[ 0.000000] raid0: comparing sdb5(489856) with sda5(489856)
[ 0.000000] raid0: EQUAL
[ 0.000000] raid0: FINAL 1 zones
[ 0.000000] raid0: done.
[ 0.000000] raid0 : md_size is 979712 blocks.
[ 0.000000] raid0 : conf->hash_spacing is 979712 blocks.
[ 0.000000] raid0 : nb_zone is 1.
[ 0.000000] raid0 : Allocating 8 bytes for hash.
[ 0.000000] md: md3 stopped.
[ 0.000000] md: bind<sdb6>
[ 0.000000] md: bind<sda6>
[ 0.000000] md3: setting max_sectors to 128, segment boundary to 32767
[ 0.000000] raid0: looking at sda6
[ 0.000000] raid0: comparing sda6(153123392) with sda6(153123392)
[ 0.000000] raid0: END
[ 0.000000] raid0: ==> UNIQUE
[ 0.000000] raid0: 1 zones
[ 0.000000] raid0: looking at sdb6
[ 0.000000] raid0: comparing sdb6(153123392) with sda6(153123392)
[ 0.000000] raid0: EQUAL
[ 0.000000] raid0: FINAL 1 zones
[ 0.000000] raid0: done.
[ 0.000000] raid0 : md_size is 306246784 blocks.
[ 0.000000] raid0 : conf->hash_spacing is 306246784 blocks.
[ 0.000000] raid0 : nb_zone is 1.
[ 0.000000] raid0 : Allocating 8 bytes for hash.
[ 0.000000] ata1.01: ATAPI: HL-DT-STCD-
[ 0.000000] usb 1-5.2: new low speed USB device using ehci_hcd and address 3
[ 0.000000] usb 1-5.2: configuration #1 chosen from 1 choice
[ 0.000000] usbcore: registered new interface driver hiddev
[ 0.000000] input: Dell Dell USB Keyboard as /devices/
[ 0.000000] ata1.01: configured for UDMA/33
[ 0.000000] input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:
[ 0.000000] usbcore: registered new interface driver usbhid
[ 0.000000] /build/
[ 0.000000] scsi 1:0:1:0: CD-ROM HL-DT-ST CDRW/DVD GCCT20N A107 PQ: 0 ANSI: 5
[ 0.000000] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 0.000000] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.000000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 0.000000] scsi3 : ata_piix
[ 0.000000] scsi4 : ata_piix
[ 0.000000] ata3: SATA max UDMA/133 cmd 0xcc30 ctl 0xcc18 bmdma 0xcc60 irq 22
[ 0.000000] ata4: SATA max UDMA/133 cmd 0xcc38 ctl 0xcc1c bmdma 0xcc68 irq 22
[ 0.000000] Driver 'sr' needs updating - please use bus_type methods
[ 0.000000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.000000] Uniform CD-ROM driver Revision: 3.20
[ 0.000000] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 0.000000] Attempting manual resume
[ 0.000000] swsusp: Resume From Partition 9:1
[ 0.000000] PM: Checking swsusp image.
[ 0.000000] PM: Resume from disk failed.
[ 0.000000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 0.000000] EXT3-fs: write access will be enabled during recovery.
[ 0.000000] kjournald starting. Commit interval 5 seconds
[ 0.000000] EXT3-fs: recovery complete.
[ 0.000000] EXT3-fs: mounted filesystem with ordered data mode.
[ 0.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.000000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.000000] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 0.000000] iTCO_vendor_
[ 0.000000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 0.000000] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 0.000000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 0.000000] input: PC Speaker as /devices/
[ 0.000000] NET: Registered protocol family 10
[ 0.000000] lo: Disabled Privacy Extensions
[ 0.000000] ADDRCONF(
[ 0.000000] ADDRCONF(
[ 0.000000] loop: module loaded
[ 0.000000] lp: driver loaded but no devices found
[ 0.000000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 0.000000] tg3: eth0: Flow control is on for TX and on for RX.
[ 0.000000] ADDRCONF(
[ 0.000000] tg3: eth1: Link is up at 100 Mbps, full duplex.
[ 0.000000] tg3: eth1: Flow control is on for TX and on for RX.
[ 0.000000] ADDRCONF(
[ 0.000000] Adding 3903608k swap on /dev/md1. Priority:-1 extents:1 across:3903608k
[ 0.000000] EXT3 FS on md3, internal journal
[ 0.000000] kjournald starting. Commit interval 5 seconds
[ 0.000000] EXT3 FS on sda1, internal journal
[ 0.000000] EXT3-fs: mounted filesystem with ordered data mode.
[ 0.000000] kjournald starting. Commit interval 5 seconds
[ 0.000000] EXT3 FS on md0, internal journal
[ 0.000000] EXT3-fs: mounted filesystem with ordered data mode.
[ 0.000000] kjournald starting. Commit interval 5 seconds
[ 0.000000] EXT3 FS on md2, internal journal
[ 0.000000] EXT3-fs: mounted filesystem with ordered data mode.
[ 0.000000] eth1: no IPv6 routers present
[ 0.000000] eth0: no IPv6 routers present
[ 0.000000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.000000] NET: Registered protocol family 17
[ 0.000000] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.000000] nf_nat_ftp: kernel >= 2.6.10 only uses 'ports' for conntrack modules
[ 0.000000] IN=eth1 OUT= MAC=00:
[ 0.000000] IN=eth1 OUT= MAC=00:
[ 0.000000] IN=eth1 OUT= MAC=00:
[ 0.000000] IN=eth1 OUT= MAC=00:
[ 0.000000] IN=eth1 OUT= MAC=00:
description: | updated |
Hi all,
I have done a reinstallation of the system (Ubuntu server amd64 8.04.2).
But I get this problem again after a 20 min of working. I think I have found the culprit: lm-sensors.
I only installed these packages at this moment: apache2, bind9, squid3 and lm-senors.
lm-sensors is the only one from the 4 installed programs that has something "to do" with the kernel.
Is it possible that lm-sensors the problem is?
I'm running this on a Dell R300.