[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008 (Ubuntu 2.6.24-21.43-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe91400 (usable) [ 0.000000] BIOS-e820: 000000003fe91400 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261777) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261777 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261777 [ 0.000000] On node 0 totalpages: 261777 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32148 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC370 checksum 0 [ 0.000000] ACPI: RSDP 000FC370, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 3FE91A11, 0038 (r1 DELL M07 27D6040B ASL 61) [ 0.000000] ACPI: FACP 3FE92800, 0074 (r1 DELL M07 27D6040B ASL 61) [ 0.000000] ACPI: DSDT 3FE93400, 418B (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 3FEA1C00, 0040 [ 0.000000] ACPI: APIC 3FE93000, 0068 (r1 DELL M07 27D6040B ASL 47) [ 0.000000] ACPI: ASF! 3FE92C00, 005B (r16 DELL M07 27D6040B ASL 61) [ 0.000000] ACPI: MCFG 3FE92FC0, 003E (r16 DELL M07 27D6040B ASL 61) [ 0.000000] ACPI: SSDT 3FE91A8C, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259732 [ 0.000000] Kernel command line: root=UUID=4d20e033-fc55-472c-86c9-2dd4e442a3be ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.070 MHz processor. [ 10.121733] Console: colour VGA+ 80x25 [ 10.121736] console [tty0] enabled [ 10.121985] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.122309] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.146516] Memory: 1025960k/1047108k available (2177k kernel code, 20472k reserved, 1005k data, 368k init, 129604k highmem) [ 10.146523] virtual kernel memory layout: [ 10.146524] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 10.146526] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.146527] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.146528] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.146529] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 10.146530] .data : 0xc03205e4 - 0xc041bdc4 (1005 kB) [ 10.146531] .text : 0xc0100000 - 0xc03205e4 (2177 kB) [ 10.146534] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.146565] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 10.226546] Calibrating delay using timer specific routine.. 3993.62 BogoMIPS (lpj=7987252) [ 10.226567] Security Framework initialized [ 10.226574] SELinux: Disabled at boot. [ 10.226586] AppArmor: AppArmor initialized [ 10.226590] Failure registering capabilities with primary security module. [ 10.226597] Mount-cache hash table entries: 512 [ 10.226699] Initializing cgroup subsys ns [ 10.226704] Initializing cgroup subsys cpuacct [ 10.226713] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 10.226720] monitor/mwait feature present. [ 10.226721] using mwait in idle threads. [ 10.226725] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.226727] CPU: L2 cache: 2048K [ 10.226729] CPU: Physical Processor ID: 0 [ 10.226731] CPU: Processor Core ID: 0 [ 10.226733] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00042940 0000c1a9 00000000 00000000 00000000 [ 10.226741] Compat vDSO mapped to ffffe000. [ 10.226751] Checking 'hlt' instruction... OK. [ 10.242890] SMP alternatives: switching to UP code [ 10.244468] Early unpacking initramfs... done [ 10.549706] ACPI: Core revision 20070126 [ 10.549757] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 10.552254] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 10.552271] SMP alternatives: switching to SMP code [ 10.552889] Booting processor 1/1 eip 3000 [ 12.625589] Initializing CPU#1 [ 12.703760] Calibrating delay using timer specific routine.. 3990.32 BogoMIPS (lpj=7980643) [ 12.703767] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 12.703772] monitor/mwait feature present. [ 12.703775] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.703777] CPU: L2 cache: 2048K [ 12.703779] CPU: Physical Processor ID: 0 [ 12.703780] CPU: Processor Core ID: 1 [ 12.703781] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00042940 0000c1a9 00000000 00000000 00000000 [ 10.642863] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 10.642884] Total of 2 processors activated (7983.94 BogoMIPS). [ 10.643039] ENABLING IO-APIC IRQs [ 10.643212] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.790383] checking TSC synchronization [CPU#0 -> CPU#1]: [ 10.810379] Measured 4114805868 cycles TSC warp between CPUs, turning off TSC clock. [ 10.810381] Marking TSC unstable due to: check_tsc_sync_source failed. [ 10.810393] Brought up 2 CPUs [ 10.810418] CPU0 attaching sched-domain: [ 10.810421] domain 0: span 03 [ 10.810422] groups: 01 02 [ 10.810425] CPU1 attaching sched-domain: [ 10.810427] domain 0: span 03 [ 10.810428] groups: 02 01 [ 12.872081] net_namespace: 64 bytes [ 12.872092] Booting paravirtualized kernel on bare hardware [ 12.872490] Time: 17:19:36 Date: 01/04/09 [ 12.872517] NET: Registered protocol family 16 [ 12.872709] EISA bus registered [ 12.872713] ACPI: bus type pci registered [ 12.897292] PCI: PCI BIOS revision 2.10 entry at 0xfaf76, last bus=12 [ 12.897294] PCI: Using configuration type 1 [ 12.897307] Setting up standard PCI resources [ 10.837901] ACPI: EC: Look up EC in DSDT [ 10.846612] ACPI: Interpreter enabled [ 10.846615] ACPI: (supports S0 S3 S4 S5) [ 10.846627] ACPI: Using IOAPIC for interrupt routing [ 10.863807] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.864416] Force enabled HPET at base address 0xfed00000 [ 10.864421] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 10.864424] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 10.865348] PCI: Transparent bridge - 0000:00:1e.0 [ 10.865421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.865811] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 10.865899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 10.866033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 10.866138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 10.866269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 10.875979] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11) [ 10.876078] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3 [ 10.876174] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 10.876260] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 10.876357] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 10.876456] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 10.876554] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 10.876653] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 10.876783] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.876813] pnp: PnP ACPI init [ 10.876819] ACPI: bus type pnp registered [ 10.891837] pnpacpi: exceeded the max number of mem resources: 12 [ 10.917526] pnp: PnP ACPI: found 13 devices [ 10.917528] ACPI: ACPI bus type pnp unregistered [ 10.917531] PnPBIOS: Disabled by ACPI PNP [ 12.979169] PCI: Using ACPI for IRQ routing [ 12.979171] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.035729] NET: Registered protocol family 8 [ 13.035731] NET: Registered protocol family 20 [ 13.035867] hpet clockevent registered [ 13.035872] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 13.035876] hpet0: 3 64-bit timers, 14318180 Hz [ 13.036907] AppArmor: AppArmor Filesystem Enabled [ 10.978184] Time: hpet clocksource has been installed. [ 10.978194] Switched to high resolution mode on CPU 0 [ 13.039726] Switched to high resolution mode on CPU 1 [ 10.991176] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 10.991179] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 10.991182] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 10.991185] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 10.991187] system 00:00: iomem range 0x100000-0x3fe913ff could not be reserved [ 10.991190] system 00:00: iomem range 0x3fe91400-0x3fefffff could not be reserved [ 10.991193] system 00:00: iomem range 0x3ff00000-0x3fffffff could not be reserved [ 10.991196] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved [ 10.991198] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 10.991201] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 10.991204] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved [ 10.991207] system 00:00: iomem range 0xf0000000-0xf0003fff could not be reserved [ 10.991213] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 10.991216] system 00:02: ioport range 0x1000-0x1005 has been reserved [ 10.991218] system 00:02: ioport range 0x1008-0x100f has been reserved [ 10.991223] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 10.991226] system 00:03: ioport range 0x1006-0x1007 has been reserved [ 10.991229] system 00:03: ioport range 0x100a-0x1059 could not be reserved [ 10.991231] system 00:03: ioport range 0x1060-0x107f has been reserved [ 10.991234] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 10.991236] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 10.991239] system 00:03: ioport range 0x1010-0x102f has been reserved [ 10.991241] system 00:03: ioport range 0x809-0x809 has been reserved [ 10.991248] system 00:08: ioport range 0xc80-0xcff could not be reserved [ 10.991251] system 00:08: ioport range 0x910-0x91f has been reserved [ 10.991253] system 00:08: ioport range 0x920-0x92f has been reserved [ 10.991256] system 00:08: ioport range 0xcbc-0xcbf has been reserved [ 10.991258] system 00:08: ioport range 0x940-0x97f has been reserved [ 10.991265] system 00:0c: ioport range 0xcb0-0xcbb has been reserved [ 11.021661] PCI: Bridge: 0000:00:01.0 [ 11.021662] IO window: disabled. [ 11.021666] MEM window: dd000000-dfefffff [ 11.021669] PREFETCH window: c0000000-cfffffff [ 11.021672] PCI: Bridge: 0000:00:1c.0 [ 11.021673] IO window: disabled. [ 11.021677] MEM window: disabled. [ 11.021680] PREFETCH window: disabled. [ 11.021685] PCI: Bridge: 0000:00:1c.1 [ 11.021686] IO window: disabled. [ 11.021690] MEM window: dcf00000-dcffffff [ 11.021694] PREFETCH window: disabled. [ 11.021698] PCI: Bridge: 0000:00:1c.2 [ 11.021699] IO window: disabled. [ 11.021704] MEM window: dce00000-dcefffff [ 11.021707] PREFETCH window: disabled. [ 11.021717] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 11.021719] IO window: 00001400-000014ff [ 11.021723] IO window: 00001800-000018ff [ 11.021727] PREFETCH window: 50000000-53ffffff [ 11.021731] MEM window: 54000000-57ffffff [ 11.021735] PCI: Bridge: 0000:00:1e.0 [ 11.021736] IO window: disabled. [ 11.021740] MEM window: disabled. [ 11.021743] PREFETCH window: disabled. [ 11.021759] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.021764] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.021780] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.021784] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.021801] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 11.021806] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 11.021823] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 11.021828] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 11.021838] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 11.021850] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 11.021854] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 11.021867] NET: Registered protocol family 2 [ 11.066145] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 11.066342] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 11.066976] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 11.067287] TCP: Hash tables configured (established 131072 bind 65536) [ 11.067290] TCP reno registered [ 11.078232] checking if image is initramfs... it is [ 11.680337] Freeing initrd memory: 7303k freed [ 13.742543] audit: initializing netlink socket (disabled) [ 13.742556] audit(1231089577.412:1): initialized [ 11.681318] highmem bounce pool size: 64 pages [ 13.744619] VFS: Disk quotas dquot_6.5.1 [ 11.683273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.683396] io scheduler noop registered [ 11.683398] io scheduler anticipatory registered [ 11.683400] io scheduler deadline registered [ 11.683410] io scheduler cfq registered (default) [ 11.683517] Boot video device is 0000:01:00.0 [ 11.683617] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.683649] assign_interrupt_mode Found MSI capability [ 11.683676] Allocate Port Service[0000:00:01.0:pcie00] [ 11.683746] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.683783] assign_interrupt_mode Found MSI capability [ 11.683812] Allocate Port Service[0000:00:1c.0:pcie00] [ 11.683843] Allocate Port Service[0000:00:1c.0:pcie02] [ 11.683917] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 11.683954] assign_interrupt_mode Found MSI capability [ 11.683984] Allocate Port Service[0000:00:1c.1:pcie00] [ 11.684019] Allocate Port Service[0000:00:1c.1:pcie02] [ 11.684094] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 11.684131] assign_interrupt_mode Found MSI capability [ 11.684161] Allocate Port Service[0000:00:1c.2:pcie00] [ 11.684191] Allocate Port Service[0000:00:1c.2:pcie02] [ 11.684416] isapnp: Scanning for PnP cards... [ 12.038161] isapnp: No Plug & Play device found [ 12.063071] Real Time Clock Driver v1.12ac [ 12.063189] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.063306] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.063926] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.064615] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.064678] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 12.064770] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 12.067887] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.067892] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.158992] mice: PS/2 mouse device common for all mice [ 14.159101] EISA: Probing bus 0 at eisa.0 [ 14.159108] Cannot allocate resource for EISA slot 1 [ 14.159130] EISA: Detected 0 cards. [ 14.159133] cpuidle: using governor ladder [ 14.159135] cpuidle: using governor menu [ 14.159214] NET: Registered protocol family 1 [ 14.159238] Using IPI No-Shortcut mode [ 14.159266] registered taskstats version 1 [ 14.159356] Magic number: 9:342:339 [ 14.159363] hash matches device ttyze [ 14.159422] hash matches device ACPI0007:01 [ 14.159425] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 14.159427] EDD information not available. [ 14.159599] Freeing unused kernel memory: 368k freed [ 14.159624] Write protecting the kernel read-only data: 801k [ 14.162605] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 13.291925] fuse init (API version 7.9) [ 13.309380] ACPI: SSDT 3FE921B3, 01F1 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 13.309549] ACPI: SSDT 3FE91F68, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 13.310045] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.310049] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.310244] ACPI: SSDT 3FE923A4, 0090 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 13.310397] ACPI: SSDT 3FE9212E, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 15.372378] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 15.372383] ACPI: Processor [CPU1] (supports 8 throttling states) [ 15.375882] ACPI: Thermal Zone [THM] (47 C) [ 13.636675] tg3.c:v3.86 (November 9, 2007) [ 13.636741] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 13.636752] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 13.657234] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:14:22:fb:48:b3 [ 13.657241] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 13.657244] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 13.677348] usbcore: registered new interface driver usbfs [ 13.677374] usbcore: registered new interface driver hub [ 13.677544] usbcore: registered new device driver usb [ 13.678617] USB Universal Host Controller Interface driver v3.0 [ 13.678668] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 13.678679] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 13.678683] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 13.678957] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 13.678986] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80 [ 13.679105] usb usb1: configuration #1 chosen from 1 choice [ 13.679127] hub 1-0:1.0: USB hub found [ 13.679132] hub 1-0:1.0: 2 ports detected [ 13.696301] SCSI subsystem initialized [ 13.769197] libata version 3.00 loaded. [ 13.780572] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 13.780585] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 13.780589] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 13.780610] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 13.780637] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60 [ 13.780740] usb usb2: configuration #1 chosen from 1 choice [ 13.780762] hub 2-0:1.0: USB hub found [ 13.780767] hub 2-0:1.0: 2 ports detected [ 13.884511] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 13.884523] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 13.884526] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 13.884548] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 13.884575] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40 [ 13.884678] usb usb3: configuration #1 chosen from 1 choice [ 13.884700] hub 3-0:1.0: USB hub found [ 13.884705] hub 3-0:1.0: 2 ports detected [ 13.988445] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 [ 13.988457] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 13.988461] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 13.988483] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 13.988510] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20 [ 13.988613] usb usb4: configuration #1 chosen from 1 choice [ 13.988634] hub 4-0:1.0: USB hub found [ 13.988639] hub 4-0:1.0: 2 ports detected [ 14.020352] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 14.092618] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 14.092637] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 14.092644] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 14.092688] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 14.096600] ehci_hcd 0000:00:1d.7: debug port 1 [ 14.096606] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 14.096613] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000 [ 14.144277] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.144385] usb usb5: configuration #1 chosen from 1 choice [ 14.144408] hub 5-0:1.0: USB hub found [ 14.144414] hub 5-0:1.0: 8 ports detected [ 14.248369] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 14.248403] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 14.248414] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 16.324173] ata_piix 0000:00:1f.2: version 2.12 [ 16.324179] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 16.324195] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 16.324224] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 16.324285] scsi0 : ata_piix [ 16.324329] scsi1 : ata_piix [ 16.325861] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 16.325864] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 14.428603] ata1.00: ATA-7: ST96023AS, 8.02, max UDMA/133 [ 14.428606] ata1.00: 117210240 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 14.445230] ata1.00: configured for UDMA/133 [ 14.540025] usb 1-2: device not accepting address 2, error -71 [ 16.825657] ata2.00: ATAPI: PHILIPS DVD-ROM SDR089, TD36, max UDMA/33 [ 16.997488] ata2.00: configured for UDMA/33 [ 14.936208] scsi 0:0:0:0: Direct-Access ATA ST96023AS 8.02 PQ: 0 ANSI: 5 [ 14.936904] scsi 1:0:0:0: CD-ROM PHILIPS DVD-ROM SDR089 TD36 PQ: 0 ANSI: 5 [ 17.005314] Driver 'sr' needs updating - please use bus_type methods [ 14.945544] Driver 'sd' needs updating - please use bus_type methods [ 14.945608] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 14.945619] sd 0:0:0:0: [sda] Write Protect is off [ 14.945621] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.945636] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.945678] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 14.945687] sd 0:0:0:0: [sda] Write Protect is off [ 14.945689] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.945703] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.945707] sda:sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 14.954592] Uniform CD-ROM driver Revision: 3.20 [ 14.954630] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 17.020703] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.020719] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 15.265305] sda1 [ 15.265372] sd 0:0:0:0: [sda] Attached SCSI disk [ 17.577852] usb 5-6: new high speed USB device using ehci_hcd and address 4 [ 15.649470] usb 5-6: configuration #1 chosen from 1 choice [ 15.887209] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 16.036809] usb 1-2: configuration #1 chosen from 1 choice [ 16.039746] hub 1-2:1.0: USB hub found [ 18.103146] hub 1-2:1.0: 4 ports detected [ 18.452322] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 16.568219] usb 2-2: configuration #1 chosen from 1 choice [ 16.788317] usb 1-2.3: new full speed USB device using uhci_hcd and address 5 [ 16.920327] usb 1-2.3: configuration #1 chosen from 1 choice [ 16.923270] hub 1-2.3:1.0: USB hub found [ 18.986660] hub 1-2.3:1.0: 3 ports detected [ 17.252061] usb 1-2.4: new full speed USB device using uhci_hcd and address 6 [ 17.416046] usb 1-2.4: configuration #1 chosen from 1 choice [ 17.627852] usb 1-2.3.2: new full speed USB device using uhci_hcd and address 7 [ 17.749879] usb 1-2.3.2: configuration #1 chosen from 1 choice [ 17.754818] usbcore: registered new interface driver hiddev [ 19.816243] usbcore: registered new interface driver libusual [ 19.826978] Initializing USB Mass Storage driver... [ 19.827446] scsi2 : SCSI emulation for USB Mass Storage devices [ 19.827498] usb-storage: device found at 4 [ 19.827500] usb-storage: waiting for device to settle before scanning [ 17.770710] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2 [ 17.798073] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2 [ 17.827534] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input3 [ 17.854066] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-2 [ 17.854086] usbcore: registered new interface driver usbhid [ 17.854089] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 19.915604] usbcore: registered new interface driver usb-storage [ 19.915607] USB Mass Storage support registered. [ 22.764301] usb-storage: device scan complete [ 24.826467] scsi 2:0:0:0: Direct-Access ST916082 1AS B PQ: 0 ANSI: 2 CCS [ 22.766878] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 22.767631] sd 2:0:0:0: [sdb] Write Protect is off [ 22.767633] sd 2:0:0:0: [sdb] Mode Sense: 00 38 00 00 [ 22.767636] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 22.768754] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 22.769506] sd 2:0:0:0: [sdb] Write Protect is off [ 22.769508] sd 2:0:0:0: [sdb] Mode Sense: 00 38 00 00 [ 22.769510] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 22.769513] sdb: sdb1 sdb2 < sdb5 > sdb3 sdb4 [ 24.988616] sd 2:0:0:0: [sdb] Attached SCSI disk [ 24.988652] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 25.255695] Attempting manual resume [ 25.255699] swsusp: Resume From Partition 8:21 [ 25.255700] PM: Checking swsusp image. [ 25.256225] PM: Resume from disk failed. [ 23.216317] kjournald starting. Commit interval 5 seconds [ 25.277753] EXT3-fs: mounted filesystem with ordered data mode. [ 34.217878] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 36.493205] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 36.513061] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.570854] Linux agpgart interface v0.102 [ 34.621513] iTCO_vendor_support: vendor-support=0 [ 34.655797] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 34.703380] ACPI: AC Adapter [AC] (on-line) [ 34.758870] ACPI: Battery Slot [BAT0] (battery present) [ 34.758916] ACPI: Battery Slot [BAT1] (battery absent) [ 36.849470] input: Lid Switch as /devices/virtual/input/input5 [ 36.866591] ACPI: Lid Switch [LID] [ 36.866649] input: Power Button (CM) as /devices/virtual/input/input6 [ 36.930085] ACPI: Power Button (CM) [PBTN] [ 36.930155] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 34.899768] input: PS/2 Mouse as /devices/virtual/input/input8 [ 36.994045] ACPI: Sleep Button (CM) [SBTN] [ 34.966180] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c2] [ 34.966201] Yenta O2: res at 0x94/0xD4: 00/ea [ 34.966203] Yenta O2: enabling read prefetch/write burst [ 35.003249] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 35.018875] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/LNXVIDEO:00/input/input10 [ 37.124998] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 35.068008] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 35.068041] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 35.092446] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 [ 35.092451] Socket status: 30000006 [ 35.092453] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 35.127296] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 35.127798] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input11 [ 35.132358] intel_rng: FWH not detected [ 35.183495] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 35.183644] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input12 [ 35.243449] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 37.604975] udev: renamed network interface eth0 to eth1 [ 35.659361] Bluetooth: Core ver 2.11 [ 35.696215] NET: Registered protocol family 31 [ 35.696219] Bluetooth: HCI device and connection manager initialized [ 35.696225] Bluetooth: HCI socket layer initialized [ 35.806166] Bluetooth: HCI USB driver ver 2.9 [ 35.808015] usbcore: registered new interface driver hci_usb [ 35.826742] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 35.826747] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 35.826888] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 35.826902] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 35.826921] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 38.207539] nvidia: module license 'NVIDIA' taints kernel. [ 38.777734] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.777744] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 38.777857] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.12 Thu Jul 17 18:11:36 PDT 2008 [ 36.801939] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 36.814481] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 38.897315] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 38.897335] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 36.903210] cs: IO port probe 0x100-0x3af: clean. [ 36.904451] cs: IO port probe 0x3e0-0x4ff: clean. [ 36.904965] cs: IO port probe 0x820-0x8ff: clean. [ 36.905403] cs: IO port probe 0xc00-0xcf7: excluding 0xc80-0xc87 0xc90-0xc97 [ 36.905971] cs: IO port probe 0xa00-0xaff: clean. [ 39.165991] lp: driver loaded but no devices found [ 39.273729] Adding 3028212k swap on /dev/sdb5. Priority:-1 extents:1 across:3028212k [ 39.828799] EXT3 FS on sdb1, internal journal [ 41.163768] ip_tables: (C) 2000-2006 Netfilter Core Team