2008-11-30 11:55:27 |
Robert Watkins |
bug |
|
|
added bug |
2008-11-30 11:59:25 |
Robert Watkins |
description |
Binary package hint: linux-image-2.6.27-7-generic
My Nova T 500 card works well in Hardy with kernel 2.6.24-22-386 and earlier.
It fails utterly in Intrepid Ibex Ubuntu 8.10 with kernel 2.6.27-7-generic
The first problem is that the firmware always fails to load first time.
[ 23.538141] dib0700: loaded with support for 8 different device-types
[ 23.539042] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in
cold state, will try to load a firmware
[ 23.539051] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 24.890408] lirc_dev: IR Remote Control driver registered, major 61
[ 25.090680] Linux video capture interface: v2.00
[ 25.214298] dvb-usb: downloading firmware from file
'dvb-usb-dib0700-1.20.fw'
[ 26.368174] dib0700: firmware download failed at 20146 with -110
[ 26.368380] usbcore: registered new interface driver dvb_usb_dib0700
The number the firmware download fails at changes, but the "with -110" is always the same.
I've installed the same recent drivers and firmware from http://linuxtv.org/hg/v4l-dvb
over both the 2.6.24 and 2.6.27 kernels. This problem remains the same.
This make me think the unwanted feature is closer to usb-core that it is to the dvb-usb-dib0700.
The problem also still exists in linux-image-2.6.27-9-generic.
[ 27.612619] dib0700: loaded with support for 8 different device-types
[ 27.612833] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 27.612841] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 27.698890] Linux video capture interface: v2.00
[ 27.768667] lirc_dev: IR Remote Control driver registered, major 61
[ 29.481341] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 30.564132] dib0700: firmware download failed at 9562 with -110
[ 30.564345] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
[ 30.567037] lirc_streamzap[-1]: Streamzap, Inc. Streamzap Remote Control on usb3:9 attached
[ 30.567042] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 30.568907] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 30.573985] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:13.2/usb3/3-8/3-8.4/3-8.4.1/3-8.4.1.4/3-8.4.1.4:1.0/input/input6
[ 30.576353] usbcore: registered new interface driver dvb_usb_dib0700
If I remove the modules and then modprobe dvb-usb-dib0700 the firmware always loads.
[ 94.386237] usbcore: deregistering interface driver uvcvideo
[ 94.403883] usbcore: deregistering interface driver dvb_usb_dib0700
[ 94.528808] dib0700: loaded with support for 8 different device-types
[ 94.530948] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 94.530961] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 94.542518] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 94.758194] dib0700: firmware started successfully.
[ 95.262390] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 95.262488] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 95.263210] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 95.385822] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)...
[ 95.486947] MT2060: successfully identified (IF1 = 1229)
[ 95.975143] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 95.975384] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 95.982037] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)...
[ 95.993671] MT2060: successfully identified (IF1 = 1217)
[ 96.561364] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[ 96.561689] usbcore: registered new interface driver dvb_usb_dib0700
(Although the system fails a within a couple of hours, with a what seems to be Bug204857 re-surfacing.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/204857 )
[ 230.456120] dvb-usb: error while enabling fifo.
[ 1958.525133] dvb-usb: error while stopping stream.
[ 1976.092180] mt2060 I2C write failed
[ 2281.908116] mt2060 I2C write failed
[ 2676.912186] mt2060 I2C write failed
[ 2806.924148] mt2060 I2C write failed (len=2)
[ 2811.924179] mt2060 I2C write failed (len=6)
[ 2816.924849] mt2060 I2C read failed |
Binary package hint: linux-image-2.6.27-7-generic
My Nova T 500 card works well in Hardy with kernel 2.6.24-22-386 and earlier.
It fails utterly in Intrepid Ibex Ubuntu 8.10 with kernel 2.6.27-7-generic
The problem is that the firmware always fails to load first time.
[ 23.538141] dib0700: loaded with support for 8 different device-types
[ 23.539042] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in
cold state, will try to load a firmware
[ 23.539051] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 24.890408] lirc_dev: IR Remote Control driver registered, major 61
[ 25.090680] Linux video capture interface: v2.00
[ 25.214298] dvb-usb: downloading firmware from file
'dvb-usb-dib0700-1.20.fw'
[ 26.368174] dib0700: firmware download failed at 20146 with -110
[ 26.368380] usbcore: registered new interface driver dvb_usb_dib0700
The number the firmware download fails at changes, but the "with -110" is always the same.
I've installed the same recent drivers and firmware from http://linuxtv.org/hg/v4l-dvb
over both the 2.6.24 and 2.6.27 kernels.
The problem remains the same on 2.6.27 and still does not appear with 2.6.24.
This make me think the unwanted feature is closer to usb-core that it is to the dvb-usb-dib0700.
The problem also still exists in linux-image-2.6.27-9-generic.
[ 27.612619] dib0700: loaded with support for 8 different device-types
[ 27.612833] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 27.612841] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 27.698890] Linux video capture interface: v2.00
[ 27.768667] lirc_dev: IR Remote Control driver registered, major 61
[ 29.481341] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 30.564132] dib0700: firmware download failed at 9562 with -110
[ 30.564345] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
[ 30.567037] lirc_streamzap[-1]: Streamzap, Inc. Streamzap Remote Control on usb3:9 attached
[ 30.567042] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 30.568907] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 30.573985] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:13.2/usb3/3-8/3-8.4/3-8.4.1/3-8.4.1.4/3-8.4.1.4:1.0/input/input6
[ 30.576353] usbcore: registered new interface driver dvb_usb_dib0700
If I remove the modules and then modprobe dvb-usb-dib0700 the firmware always loads.
[ 94.386237] usbcore: deregistering interface driver uvcvideo
[ 94.403883] usbcore: deregistering interface driver dvb_usb_dib0700
[ 94.528808] dib0700: loaded with support for 8 different device-types
[ 94.530948] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 94.530961] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 94.542518] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 94.758194] dib0700: firmware started successfully.
[ 95.262390] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 95.262488] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 95.263210] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 95.385822] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)...
[ 95.486947] MT2060: successfully identified (IF1 = 1229)
[ 95.975143] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 95.975384] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 95.982037] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)...
[ 95.993671] MT2060: successfully identified (IF1 = 1217)
[ 96.561364] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[ 96.561689] usbcore: registered new interface driver dvb_usb_dib0700
(Although the system fails a within a couple of hours, with a what seems to be Bug204857 re-surfacing.)
[ 230.456120] dvb-usb: error while enabling fifo.
[ 1958.525133] dvb-usb: error while stopping stream.
[ 1976.092180] mt2060 I2C write failed
[ 2281.908116] mt2060 I2C write failed
[ 2676.912186] mt2060 I2C write failed
[ 2806.924148] mt2060 I2C write failed (len=2)
[ 2811.924179] mt2060 I2C write failed (len=6)
[ 2816.924849] mt2060 I2C read failed |
|
2008-12-01 09:48:26 |
Robert Watkins |
bug |
|
|
added attachment 'dmesg.log' (dmesg) |
2008-12-01 09:49:13 |
Robert Watkins |
bug |
|
|
added attachment 'version.log' (version) |
2008-12-01 09:52:02 |
Robert Watkins |
bug |
|
|
added attachment 'lspci-vvnn.log' (lspci) |
2008-12-01 09:53:20 |
Robert Watkins |
bug |
|
|
added attachment 'uname-a.log' (uname) |
2008-12-01 09:57:14 |
Robert Watkins |
description |
Binary package hint: linux-image-2.6.27-7-generic
My Nova T 500 card works well in Hardy with kernel 2.6.24-22-386 and earlier.
It fails utterly in Intrepid Ibex Ubuntu 8.10 with kernel 2.6.27-7-generic
The problem is that the firmware always fails to load first time.
[ 23.538141] dib0700: loaded with support for 8 different device-types
[ 23.539042] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in
cold state, will try to load a firmware
[ 23.539051] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 24.890408] lirc_dev: IR Remote Control driver registered, major 61
[ 25.090680] Linux video capture interface: v2.00
[ 25.214298] dvb-usb: downloading firmware from file
'dvb-usb-dib0700-1.20.fw'
[ 26.368174] dib0700: firmware download failed at 20146 with -110
[ 26.368380] usbcore: registered new interface driver dvb_usb_dib0700
The number the firmware download fails at changes, but the "with -110" is always the same.
I've installed the same recent drivers and firmware from http://linuxtv.org/hg/v4l-dvb
over both the 2.6.24 and 2.6.27 kernels.
The problem remains the same on 2.6.27 and still does not appear with 2.6.24.
This make me think the unwanted feature is closer to usb-core that it is to the dvb-usb-dib0700.
The problem also still exists in linux-image-2.6.27-9-generic.
[ 27.612619] dib0700: loaded with support for 8 different device-types
[ 27.612833] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 27.612841] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 27.698890] Linux video capture interface: v2.00
[ 27.768667] lirc_dev: IR Remote Control driver registered, major 61
[ 29.481341] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 30.564132] dib0700: firmware download failed at 9562 with -110
[ 30.564345] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
[ 30.567037] lirc_streamzap[-1]: Streamzap, Inc. Streamzap Remote Control on usb3:9 attached
[ 30.567042] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 30.568907] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 30.573985] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:13.2/usb3/3-8/3-8.4/3-8.4.1/3-8.4.1.4/3-8.4.1.4:1.0/input/input6
[ 30.576353] usbcore: registered new interface driver dvb_usb_dib0700
If I remove the modules and then modprobe dvb-usb-dib0700 the firmware always loads.
[ 94.386237] usbcore: deregistering interface driver uvcvideo
[ 94.403883] usbcore: deregistering interface driver dvb_usb_dib0700
[ 94.528808] dib0700: loaded with support for 8 different device-types
[ 94.530948] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 94.530961] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 94.542518] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 94.758194] dib0700: firmware started successfully.
[ 95.262390] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 95.262488] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 95.263210] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 95.385822] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)...
[ 95.486947] MT2060: successfully identified (IF1 = 1229)
[ 95.975143] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 95.975384] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 95.982037] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)...
[ 95.993671] MT2060: successfully identified (IF1 = 1217)
[ 96.561364] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[ 96.561689] usbcore: registered new interface driver dvb_usb_dib0700
(Although the system fails a within a couple of hours, with a what seems to be Bug204857 re-surfacing.)
[ 230.456120] dvb-usb: error while enabling fifo.
[ 1958.525133] dvb-usb: error while stopping stream.
[ 1976.092180] mt2060 I2C write failed
[ 2281.908116] mt2060 I2C write failed
[ 2676.912186] mt2060 I2C write failed
[ 2806.924148] mt2060 I2C write failed (len=2)
[ 2811.924179] mt2060 I2C write failed (len=6)
[ 2816.924849] mt2060 I2C read failed |
Binary package hint: linux-image-2.6.27-7-generic
My Nova T 500 card works well in Hardy with kernel 2.6.24-22-386 and earlier.
It fails utterly in Intrepid Ibex Ubuntu 8.10 with kernel 2.6.27-7-generic
The problem is that the firmware always fails to load first time.
The number the firmware download fails at changes, but the "with -110" is always the same.
I've installed the same recent drivers and firmware from http://linuxtv.org/hg/v4l-dvb
over both the 2.6.24 and 2.6.27 kernels.
The problem remains the same on 2.6.27 and still does not appear with 2.6.24.
This make me think the unwanted feature is closer to usb-core that it is to the dvb-usb-dib0700.
The problem also still exists in linux-image-2.6.27-9-generic.
[ 27.612619] dib0700: loaded with support for 8 different device-types
[ 27.612833] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 27.612841] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 27.698890] Linux video capture interface: v2.00
[ 27.768667] lirc_dev: IR Remote Control driver registered, major 61
[ 29.481341] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 30.564132] dib0700: firmware download failed at 9562 with -110
[ 30.564345] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
[ 30.567037] lirc_streamzap[-1]: Streamzap, Inc. Streamzap Remote Control on usb3:9 attached
[ 30.567042] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 30.568907] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 30.573985] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:13.2/usb3/3-8/3-8.4/3-8.4.1/3-8.4.1.4/3-8.4.1.4:1.0/input/input6
[ 30.576353] usbcore: registered new interface driver dvb_usb_dib0700
If I remove the modules and then modprobe dvb-usb-dib0700 the firmware always loads.
[ 94.386237] usbcore: deregistering interface driver uvcvideo
[ 94.403883] usbcore: deregistering interface driver dvb_usb_dib0700
[ 94.528808] dib0700: loaded with support for 8 different device-types
[ 94.530948] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 94.530961] firmware: requesting dvb-usb-dib0700-1.20.fw
[ 94.542518] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 94.758194] dib0700: firmware started successfully.
[ 95.262390] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 95.262488] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 95.263210] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 95.385822] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)...
[ 95.486947] MT2060: successfully identified (IF1 = 1229)
[ 95.975143] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 95.975384] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 95.982037] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)...
[ 95.993671] MT2060: successfully identified (IF1 = 1217)
[ 96.561364] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[ 96.561689] usbcore: registered new interface driver dvb_usb_dib0700
(Although the system fails a within a couple of hours, with a what seems to be Bug204857 re-surfacing.)
[ 230.456120] dvb-usb: error while enabling fifo.
[ 1958.525133] dvb-usb: error while stopping stream.
[ 1976.092180] mt2060 I2C write failed
[ 2281.908116] mt2060 I2C write failed
[ 2676.912186] mt2060 I2C write failed
[ 2806.924148] mt2060 I2C write failed (len=2)
[ 2811.924179] mt2060 I2C write failed (len=6)
[ 2816.924849] mt2060 I2C read failed |
|
2008-12-01 11:09:18 |
Robert Watkins |
bug |
|
|
added attachment 'dmesg.log.2.6.25-2-386' (dmesg from kernel 2.6.25-2-386) |
2008-12-01 17:15:20 |
Leann Ogasawara |
linux: status |
New |
Triaged |
|
2008-12-01 17:15:20 |
Leann Ogasawara |
linux: assignee |
|
ubuntu-kernel-team |
|
2008-12-01 17:15:20 |
Leann Ogasawara |
linux: importance |
Undecided |
Medium |
|
2008-12-01 17:15:20 |
Leann Ogasawara |
linux: statusexplanation |
|
|
|
2009-08-27 14:59:53 |
Ralf |
summary |
Nova T 500 : dib0700: firmware download failed |
Nova T 500 : dib0700: firmware download failed with (-110) on any first load of the module |
|
2010-03-13 20:30:29 |
Jeremy Foshee |
tags |
|
kj-triage |
|
2010-03-13 20:30:30 |
Jeremy Foshee |
linux (Ubuntu): status |
Triaged |
Incomplete |
|
2010-05-25 17:43:17 |
Jeremy Foshee |
tags |
kj-triage |
kj-expired kj-triage |
|
2010-05-25 17:43:20 |
Jeremy Foshee |
linux (Ubuntu): status |
Incomplete |
Expired |
|