[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-7-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-3ubuntu2) ) #20-Ubuntu SMP Mon Feb 9 15:42:34 UTC 2009 (Ubuntu 2.6.28-7.20-generic) [ 0.000000] Command line: root=UUID=1d775a28-85fa-476e-941f-f81edf03d9e4 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6e3000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x3ffffffff [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf6d0000 (usable) [ 0.000000] modified: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS) [ 0.000000] modified: 00000000bf6e3000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6d0000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf6d0000 page 4k [ 0.000000] kernel direct mapping tables up to bf6d0000 @ 10000-15000 [ 0.000000] last_map_addr: bf6d0000 end: bf6d0000 [ 0.000000] RAMDISK: 37784000 - 37fefa99 [ 0.000000] ACPI: RSDP 000F6DE0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BF6D7273, 00AC (r1 SECCSD LH43STAR 6040000 LTP 0) [ 0.000000] ACPI: FACP BF6DFB37, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT BF6D923E, 6885 (r2 INTEL CRESTLNE 6040000 INTL 20050624) [ 0.000000] ACPI: FACS BF6E2FC0, 0040 [ 0.000000] ACPI: APIC BF6DFC2B, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET BF6DFC93, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG BF6DFCCB, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA BF6DFD07, 0032 (r1 Intel CRESTLN 6040000 5A52) [ 0.000000] ACPI: TMOR BF6DFD39, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: APIC BF6DFD5F, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: HPET BF6DFDC7, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: BOOT BF6DFDFF, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: ASF! BF6DFE27, 0063 (r16 CETP CETP 6040000 PTL 1) [ 0.000000] ACPI: SLIC BF6DFE8A, 0176 (r1 SECCSD LH43STAR 6040000 LTP 0) [ 0.000000] ACPI: SSDT BF6D8BEF, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT BF6D855D, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT BF6D8524, 0039 (r1 BrtRef DD01BRT 1000 INTL 20050624) [ 0.000000] ACPI: SSDT BF6D78AB, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT BF6D7805, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT BF6D731F, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00bf6d0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000b5f3b0] TEXT DATA BSS ==> [0000200000 - 0000b5f3b0] [ 0.000000] #3 [0037784000 - 0037fefa99] RAMDISK ==> [0037784000 - 0037fefa99] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000f6e10] 000f6e10 [ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf6d0 [ 0.000000] On node 0 totalpages: 783967 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2503 pages reserved [ 0.000000] DMA zone: 1424 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10664 pages used for memmap [ 0.000000] DMA32 zone: 769320 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 770744 [ 0.000000] Kernel command line: root=UUID=1d775a28-85fa-476e-941f-f81edf03d9e4 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1828.829 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] allocated 31457280 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 3036832k/3136320k available (4645k kernel code, 452k absent, 98424k reserved, 2513k data, 528k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.65 BogoMIPS (lpj=7315316) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] ACPI: Core revision 20080926 [ 0.006423] ACPI: Checking initramfs for custom DSDT [ 0.576060] Setting APIC routing to flat [ 0.576488] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.616296] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.620002] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3657.51 BogoMIPS (lpj=7315032) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.704555] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.704591] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.708052] Brought up 2 CPUs [ 0.708056] Total of 2 processors activated (7315.17 BogoMIPS). [ 0.708108] CPU0 attaching sched-domain: [ 0.708111] domain 0: span 0-1 level MC [ 0.708115] groups: 0 1 [ 0.708121] CPU1 attaching sched-domain: [ 0.708124] domain 0: span 0-1 level MC [ 0.708127] groups: 1 0 [ 0.708211] net_namespace: 1400 bytes [ 0.708211] Booting paravirtualized kernel on bare hardware [ 0.708322] Time: 11:11:20 Date: 02/13/09 [ 0.708322] regulator: core version 0.5 [ 0.708322] NET: Registered protocol family 16 [ 0.708322] ACPI: bus type pci registered [ 0.708322] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.708322] PCI: MCFG area at e0000000 reserved in E820 [ 0.725657] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.725660] PCI: Using configuration type 1 for base access [ 0.729265] ACPI: EC: Look up EC in DSDT [ 0.735418] ACPI: BIOS _OSI(Linux) query ignored [ 0.736022] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.740109] ACPI: Interpreter enabled [ 0.740113] ACPI: (supports S0 S3 S4 S5) [ 0.740139] ACPI: Using IOAPIC for interrupt routing [ 0.748965] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.748968] ACPI: EC: driver started in interrupt mode [ 0.749245] ACPI: No dock devices found. [ 0.749259] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.749414] pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf00fffff] [ 0.749424] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.749430] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.749475] pci 0000:00:02.1: reg 10 64bit mmio: [0xf0100000-0xf01fffff] [ 0.749598] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.749668] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.749744] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0704000-0xf07043ff] [ 0.749802] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.749809] pci 0000:00:1a.7: PME# disabled [ 0.749871] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff] [ 0.749917] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.749922] pci 0000:00:1b.0: PME# disabled [ 0.750000] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.750005] pci 0000:00:1c.0: PME# disabled [ 0.750082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.750088] pci 0000:00:1c.1: PME# disabled [ 0.750163] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.750235] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.750309] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.750386] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0704400-0xf07047ff] [ 0.750438] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.750444] pci 0000:00:1d.7: PME# disabled [ 0.750617] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.750622] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.750678] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.750687] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.750696] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.750706] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.750715] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ef] [ 0.750724] pci 0000:00:1f.2: reg 24 io port: [0x18d0-0x18df] [ 0.750746] pci 0000:00:1f.2: PME# supported from D3hot [ 0.750752] pci 0000:00:1f.2: PME# disabled [ 0.750782] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.750811] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.751024] pci 0000:02:00.0: reg 10 32bit mmio: [0xf0300000-0xf0300fff] [ 0.751189] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.751202] pci 0000:02:00.0: PME# disabled [ 0.752006] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0300000-0xf03fffff] [ 0.752102] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0200000-0xf0203fff] [ 0.752114] pci 0000:03:00.0: reg 18 io port: [0x2000-0x20ff] [ 0.752169] pci 0000:03:00.0: supports D1 D2 [ 0.752171] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.752178] pci 0000:03:00.0: PME# disabled [ 0.752247] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff] [ 0.752253] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0200000-0xf02fffff] [ 0.752327] pci 0000:04:09.0: reg 10 32bit mmio: [0xf0400000-0xf0400fff] [ 0.752340] pci 0000:04:09.0: supports D1 D2 [ 0.752343] pci 0000:04:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.752348] pci 0000:04:09.0: PME# disabled [ 0.752395] pci 0000:04:09.1: reg 10 32bit mmio: [0xf0401000-0xf04017ff] [ 0.752449] pci 0000:04:09.1: PME# supported from D0 D3hot D3cold [ 0.752455] pci 0000:04:09.1: PME# disabled [ 0.752500] pci 0000:04:09.2: reg 10 32bit mmio: [0xf0401800-0xf04018ff] [ 0.752553] pci 0000:04:09.2: supports D1 D2 [ 0.752555] pci 0000:04:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.752561] pci 0000:04:09.2: PME# disabled [ 0.752606] pci 0000:04:09.3: reg 10 32bit mmio: [0xf0401c00-0xf0401cff] [ 0.752658] pci 0000:04:09.3: supports D1 D2 [ 0.752661] pci 0000:04:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.752667] pci 0000:04:09.3: PME# disabled [ 0.752716] pci 0000:04:09.4: reg 10 32bit mmio: [0xf0402000-0xf04020ff] [ 0.752770] pci 0000:04:09.4: supports D1 D2 [ 0.752772] pci 0000:04:09.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.752778] pci 0000:04:09.4: PME# disabled [ 0.752825] pci 0000:04:09.5: reg 10 32bit mmio: [0xf0402400-0xf04024ff] [ 0.752877] pci 0000:04:09.5: supports D1 D2 [ 0.752879] pci 0000:04:09.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.752885] pci 0000:04:09.5: PME# disabled [ 0.752944] pci 0000:00:1e.0: transparent bridge [ 0.752953] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0400000-0xf04fffff] [ 0.753005] bus 00 -> node 0 [ 0.753015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.753643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.753853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.754096] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.772140] ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10 [ 0.772312] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.772479] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 0.772645] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.772810] ACPI: PCI Interrupt Link [LNKE] (IRQs *11) [ 0.772976] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 0.773141] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) [ 0.773306] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) [ 0.773403] ACPI: Power Resource [FN00] (off) [ 0.773403] ACPI: WMI: Mapper loaded [ 0.773403] SCSI subsystem initialized [ 0.773403] libata version 3.00 loaded. [ 0.773403] usbcore: registered new interface driver usbfs [ 0.773403] usbcore: registered new interface driver hub [ 0.773403] usbcore: registered new device driver usb [ 0.776165] PCI: Using ACPI for IRQ routing [ 0.792024] Bluetooth: Core ver 2.13 [ 0.792030] NET: Registered protocol family 31 [ 0.792030] Bluetooth: HCI device and connection manager initialized [ 0.792030] Bluetooth: HCI socket layer initialized [ 0.792030] NET: Registered protocol family 8 [ 0.792030] NET: Registered protocol family 20 [ 0.792051] NetLabel: Initializing [ 0.792051] NetLabel: domain hash size = 128 [ 0.792051] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.792051] NetLabel: unlabeled traffic allowed by default [ 0.792055] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.792055] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.796087] AppArmor: AppArmor Filesystem Enabled [ 0.800011] Switched to high resolution mode on CPU 0 [ 0.800633] Switched to high resolution mode on CPU 1 [ 0.809012] pnp: PnP ACPI init [ 0.809025] ACPI: bus type pnp registered [ 0.812683] pnp: PnP ACPI: found 10 devices [ 0.812686] ACPI: ACPI bus type pnp unregistered [ 0.812700] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.812703] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.812707] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.812711] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.812714] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.812717] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.812721] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.812724] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.812733] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.812742] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.812746] system 00:06: ioport range 0x6b0-0x6ff has been reserved [ 0.812749] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.812752] system 00:06: ioport range 0x900-0x90f has been reserved [ 0.812755] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.812759] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.812762] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.812765] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.817991] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.817994] pci 0000:00:1c.0: IO window: disabled [ 0.818002] pci 0000:00:1c.0: MEM window: 0xf0300000-0xf03fffff [ 0.818008] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.818017] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.818021] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 0.818028] pci 0000:00:1c.1: MEM window: 0xf0200000-0xf02fffff [ 0.818034] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.818046] pci 0000:04:09.0: CardBus bridge, secondary bus 0000:05 [ 0.818048] pci 0000:04:09.0: IO window: 0x003000-0x0030ff [ 0.818054] pci 0000:04:09.0: IO window: 0x003400-0x0034ff [ 0.818059] pci 0000:04:09.0: PREFETCH window: 0xc4000000-0xc7ffffff [ 0.818065] pci 0000:04:09.0: MEM window: 0xc8000000-0xcbffffff [ 0.818071] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.818075] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 0.818083] pci 0000:00:1e.0: MEM window: 0xf0400000-0xf04fffff [ 0.818089] pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000c7ffffff [ 0.818109] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.818116] pci 0000:00:1c.0: setting latency timer to 64 [ 0.818128] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.818134] pci 0000:00:1c.1: setting latency timer to 64 [ 0.818144] pci 0000:00:1e.0: setting latency timer to 64 [ 0.818221] pci 0000:04:09.0: power state changed by ACPI to D0 [ 0.818231] pci 0000:04:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.818238] bus: 00 index 0 io port: [0x00-0xffff] [ 0.818241] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.818244] bus: 02 index 0 mmio: [0x0-0x0] [ 0.818246] bus: 02 index 1 mmio: [0xf0300000-0xf03fffff] [ 0.818249] bus: 02 index 2 mmio: [0x0-0x0] [ 0.818251] bus: 02 index 3 mmio: [0x0-0x0] [ 0.818253] bus: 03 index 0 io port: [0x2000-0x2fff] [ 0.818255] bus: 03 index 1 mmio: [0xf0200000-0xf02fffff] [ 0.818258] bus: 03 index 2 mmio: [0x0-0x0] [ 0.818260] bus: 03 index 3 mmio: [0x0-0x0] [ 0.818262] bus: 04 index 0 io port: [0x3000-0x3fff] [ 0.818265] bus: 04 index 1 mmio: [0xf0400000-0xf04fffff] [ 0.818267] bus: 04 index 2 mmio: [0xc4000000-0xc7ffffff] [ 0.818270] bus: 04 index 3 io port: [0x00-0xffff] [ 0.818272] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.818275] bus: 05 index 0 io port: [0x3000-0x30ff] [ 0.818277] bus: 05 index 1 io port: [0x3400-0x34ff] [ 0.818280] bus: 05 index 2 mmio: [0xc4000000-0xc7ffffff] [ 0.818282] bus: 05 index 3 mmio: [0xc8000000-0xcbffffff] [ 0.818294] NET: Registered protocol family 2 [ 0.861074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.861842] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.864981] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.865881] TCP: Hash tables configured (established 262144 bind 65536) [ 0.865885] TCP reno registered [ 0.877146] NET: Registered protocol family 1 [ 0.877317] checking if image is initramfs... it is [ 2.023142] Freeing initrd memory: 8622k freed [ 2.028538] Simple Boot Flag at 0x36 set to 0x1 [ 2.029604] audit: initializing netlink socket (disabled) [ 2.029622] type=2000 audit(1234523481.028:1): initialized [ 2.041744] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.044896] VFS: Disk quotas dquot_6.5.1 [ 2.044999] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.046266] msgmni has been set to 5949 [ 2.046506] alg: No test for stdrng (krng) [ 2.046519] io scheduler noop registered [ 2.046521] io scheduler anticipatory registered [ 2.046524] io scheduler deadline registered [ 2.046612] io scheduler cfq registered (default) [ 2.046627] pci 0000:00:02.0: Boot video device [ 2.050063] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.050122] pcieport-driver 0000:00:1c.0: found MSI capability [ 2.050164] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X [ 2.050183] pci_express 0000:00:1c.0:pcie00: allocate port service [ 2.050238] pci_express 0000:00:1c.0:pcie02: allocate port service [ 2.050287] pci_express 0000:00:1c.0:pcie03: allocate port service [ 2.050414] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 2.050471] pcieport-driver 0000:00:1c.1: found MSI capability [ 2.050510] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X [ 2.050530] pci_express 0000:00:1c.1:pcie00: allocate port service [ 2.050579] pci_express 0000:00:1c.1:pcie02: allocate port service [ 2.050627] pci_express 0000:00:1c.1:pcie03: allocate port service [ 2.050824] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.051136] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.051618] ACPI: AC Adapter [ADP1] (off-line) [ 2.057462] ACPI: Battery Slot [BAT1] (battery present) [ 2.057779] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.057783] ACPI: Power Button (FF) [PWRF] [ 2.058004] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.058442] ACPI: Lid Switch [LID0] [ 2.058642] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 2.058653] ACPI: Power Button (CM) [PWRB] [ 2.058744] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 2.058747] ACPI: Sleep Button (CM) [SLPB] [ 2.058990] fan PNP0C0B:00: registered as cooling_device0 [ 2.058999] ACPI: Fan [FAN0] (off) [ 2.060314] ACPI: SSDT BF6D81B8, 02A4 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 2.060963] ACPI: SSDT BF6D7B0A, 0629 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 2.064389] Monitor-Mwait will be used to enter C-1 state [ 2.064393] Monitor-Mwait will be used to enter C-2 state [ 2.064396] Monitor-Mwait will be used to enter C-3 state [ 2.064448] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.064504] processor ACPI_CPU:00: registered as cooling_device1 [ 2.064509] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.065012] ACPI: SSDT BF6D845C, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 2.065501] ACPI: SSDT BF6D8133, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 2.066873] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 2.066932] processor ACPI_CPU:01: registered as cooling_device2 [ 2.066938] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.071190] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.071811] ACPI: Thermal Zone [TZ00] (31 C) [ 2.072281] thermal LNXTHERM:02: registered as thermal_zone1 [ 2.072905] ACPI: Thermal Zone [TZ01] (31 C) [ 2.116474] Linux agpgart interface v0.103 [ 2.116480] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.119041] brd: module loaded [ 2.119982] loop: module loaded [ 2.120256] Fixed MDIO Bus: probed [ 2.120264] PPP generic driver version 2.4.2 [ 2.120442] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 2.120514] Driver 'sd' needs updating - please use bus_type methods [ 2.120557] Driver 'sr' needs updating - please use bus_type methods [ 2.120792] ata_piix 0000:00:1f.2: version 2.12 [ 2.120815] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.120821] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 2.272022] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.272120] scsi0 : ata_piix [ 2.272306] scsi1 : ata_piix [ 2.273917] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 [ 2.273921] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 [ 2.509822] ata1.00: ATA-8: ST9320421ASG, SD13, max UDMA/133 [ 2.509826] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.568752] ata1.00: configured for UDMA/133 [ 2.748441] ata2.00: ATAPI: TEAC-DV-W28E-R, S.0A, max UDMA/33 [ 2.780362] ata2.00: configured for UDMA/33 [ 2.798586] isa bounce pool size: 16 pages [ 2.798691] scsi 0:0:0:0: Direct-Access ATA ST9320421ASG SD13 PQ: 0 ANSI: 5 [ 2.798922] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.798946] sd 0:0:0:0: [sda] Write Protect is off [ 2.798949] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.798986] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.799065] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.799086] sd 0:0:0:0: [sda] Write Protect is off [ 2.799089] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.799125] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.799130] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 2.916603] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.916725] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.954837] scsi 1:0:0:0: CD-ROM TEAC DV-W28E-R S.0A PQ: 0 ANSI: 5 [ 3.078726] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.078730] Uniform CD-ROM driver Revision: 3.20 [ 3.078911] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.079021] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.081369] usbcore: registered new interface driver libusual [ 3.081471] usbcore: registered new interface driver usbserial [ 3.081515] USB Serial support registered for generic [ 3.081564] usbcore: registered new interface driver usbserial_generic [ 3.081567] usbserial: USB Serial Driver core [ 3.081690] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.084628] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.086228] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.086235] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.086238] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.086241] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.086244] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.101110] mice: PS/2 mouse device common for all mice [ 3.161211] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 3.161247] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.161381] device-mapper: uevent: version 1.0.3 [ 3.161544] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.161629] device-mapper: multipath: version 1.0.5 loaded [ 3.161632] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.162054] cpuidle: using governor ladder [ 3.162662] cpuidle: using governor menu [ 3.162738] Marking TSC unstable due to TSC halts in idle [ 3.163278] TCP cubic registered [ 3.163412] NET: Registered protocol family 10 [ 3.163930] lo: Disabled Privacy Extensions [ 3.164313] NET: Registered protocol family 17 [ 3.164392] Bluetooth: L2CAP ver 2.11 [ 3.164395] Bluetooth: L2CAP socket layer initialized [ 3.164399] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.164400] Bluetooth: SCO socket layer initialized [ 3.164465] Bluetooth: RFCOMM socket layer initialized [ 3.164475] Bluetooth: RFCOMM TTY layer initialized [ 3.164477] Bluetooth: RFCOMM ver 1.10 [ 3.164745] registered taskstats version 1 [ 3.164916] Magic number: 13:731:175 [ 3.164920] misc network_throughput: hash matches [ 3.164956] pci_express 0000:00:1c.0:pcie03: hash matches [ 3.164982] acpi device:0b: hash matches [ 3.165062] rtc_cmos 00:07: setting system clock to 2009-02-13 11:11:23 UTC (1234523483) [ 3.165066] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.165069] EDD information not available. [ 3.165128] Freeing unused kernel memory: 528k freed [ 3.165400] Write protecting the kernel read-only data: 6568k [ 3.208072] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 3.317149] fuse init (API version 7.10) [ 3.428837] uhci_hcd: USB Universal Host Controller Interface driver [ 3.428907] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.428918] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.428923] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.429034] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.429081] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 3.429193] usb usb1: configuration #1 chosen from 1 choice [ 3.429229] hub 1-0:1.0: USB hub found [ 3.429238] hub 1-0:1.0: 2 ports detected [ 3.429388] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.429397] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.429401] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.429464] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.429506] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 3.429603] usb usb2: configuration #1 chosen from 1 choice [ 3.429635] hub 2-0:1.0: USB hub found [ 3.429644] hub 2-0:1.0: 2 ports detected [ 3.429767] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.429775] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.429780] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.429835] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 3.429874] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 3.429975] usb usb3: configuration #1 chosen from 1 choice [ 3.430008] hub 3-0:1.0: USB hub found [ 3.430016] hub 3-0:1.0: 2 ports detected [ 3.430126] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.430134] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.430139] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.430198] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 3.430238] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 3.430334] usb usb4: configuration #1 chosen from 1 choice [ 3.430370] hub 4-0:1.0: USB hub found [ 3.430378] hub 4-0:1.0: 2 ports detected [ 3.430495] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.430503] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.430507] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.430571] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 3.430625] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 3.430734] usb usb5: configuration #1 chosen from 1 choice [ 3.430767] hub 5-0:1.0: USB hub found [ 3.430780] hub 5-0:1.0: 2 ports detected [ 3.441835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.441839] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 3.441886] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.441926] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.441931] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.442024] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 3.445929] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.445937] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 3.445946] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0704000 [ 3.464058] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.464190] usb usb6: configuration #1 chosen from 1 choice [ 3.464228] hub 6-0:1.0: USB hub found [ 3.464238] hub 6-0:1.0: 4 ports detected [ 3.464381] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.464411] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.464415] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.464480] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 3.468393] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.468401] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.468410] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0704400 [ 3.472642] sky2 driver version 1.22 [ 3.472691] sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.472705] sky2 0000:03:00.0: setting latency timer to 64 [ 3.472743] sky2 0000:03:00.0: Yukon-2 FE chip revision 3 [ 3.484026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.484144] usb usb7: configuration #1 chosen from 1 choice [ 3.484181] hub 7-0:1.0: USB hub found [ 3.484191] hub 7-0:1.0: 6 ports detected [ 3.519234] ohci1394 0000:04:09.1: power state changed by ACPI to D0 [ 3.519247] ohci1394 0000:04:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.536523] sky2 0000:03:00.0: Marvell Yukon 88E8039 Fast Ethernet Controller [ 3.536527] Part Number: Yukon 88E8039 [ 3.536529] Engineering Level: Rev. 1.5 [ 3.536531] Manufacturer: Marvell [ 3.536614] sky2 0000:03:00.0: irq 2301 for MSI/MSI-X [ 3.571992] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[f0401000-f04017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.593817] sky2 eth0: addr 00:13:77:90:2d:77 [ 3.800188] usb 6-2: new high speed USB device using ehci_hcd and address 2 [ 4.021761] usb 6-2: configuration #1 chosen from 1 choice [ 4.373200] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 4.500178] Clocksource tsc unstable (delta = -196977008 ns) [ 4.543078] usb 5-1: configuration #1 chosen from 1 choice [ 4.852990] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000f0410109fbf9] [ 9.485206] kjournald starting. Commit interval 5 seconds [ 9.485248] EXT3-fs: mounted filesystem with ordered data mode. [ 14.110607] udev: starting version 137 [ 14.381089] cfg80211: Using static regulatory domain info [ 14.381094] cfg80211: Regulatory domain: US [ 14.381096] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.381099] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 14.381102] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.381105] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.381108] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.381111] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.381114] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 14.381117] cfg80211: Calling CRDA for country: US [ 14.395416] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 14.396198] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 14.399342] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 14.411057] Linux video capture interface: v2.00 [ 14.472598] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302) [ 14.473423] input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb6/6-2/6-2:1.0/input/input6 [ 14.489136] usbcore: registered new interface driver uvcvideo [ 14.489141] USB Video Class driver (v0.1.0) [ 14.565464] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 14.565469] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 14.565598] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.565613] iwl3945 0000:02:00.0: setting latency timer to 64 [ 14.565670] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 14.631966] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 14.639650] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 14.643840] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input7 [ 14.676153] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.770279] iwl3945 0000:02:00.0: PCI INT A disabled [ 14.863863] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 14.864011] usbcore: registered new interface driver btusb [ 14.922695] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 14.922781] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.961976] iTCO_vendor_support: vendor-support=0 [ 14.964352] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 [ 14.964526] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 14.964635] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 15.021742] yenta_cardbus 0000:04:09.0: CardBus bridge found [144d:c510] [ 15.023831] sdhci: Secure Digital Host Controller Interface driver [ 15.023834] sdhci: Copyright(c) Pierre Ossman [ 15.041442] ricoh-mmc: Ricoh MMC Controller disabling driver [ 15.041447] ricoh-mmc: Copyright(c) Philip Langdale [ 15.150259] yenta_cardbus 0000:04:09.0: ISA IRQ mask 0x0cb8, PCI irq 20 [ 15.150265] yenta_cardbus 0000:04:09.0: Socket status: 30000006 [ 15.150269] pci_bus 0000:04: Raising subordinate bus# of parent bus (#04) from #05 to #08 [ 15.150279] yenta_cardbus 0000:04:09.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 15.150283] yenta_cardbus 0000:04:09.0: pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff [ 15.150287] yenta_cardbus 0000:04:09.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc7ffffff [ 15.173492] sdhci-pci 0000:04:09.2: SDHCI controller found [1180:0822] (rev 18) [ 15.173605] sdhci-pci 0000:04:09.2: power state changed by ACPI to D0 [ 15.173617] sdhci-pci 0000:04:09.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 15.173671] sdhci-pci 0000:04:09.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 15.173767] mmc0: SDHCI controller on PCI [0000:04:09.2] using DMA [ 15.178706] ricoh-mmc: Ricoh MMC controller found at 0000:04:09.3 [1180:0843] (rev 0) [ 15.178734] ricoh-mmc: Controller is now disabled. [ 15.266866] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 16.236289] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04711/0x200000 [ 16.300016] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9 [ 16.933513] lp: driver loaded but no devices found [ 16.978923] ppdev: user-space parallel port driver [ 17.159638] EXT3 FS on sda2, internal journal [ 26.009291] kjournald starting. Commit interval 5 seconds [ 26.011973] EXT3 FS on dm-3, internal journal [ 26.012059] EXT3-fs: recovery complete. [ 26.014574] EXT3-fs: mounted filesystem with ordered data mode. [ 26.559702] kjournald starting. Commit interval 5 seconds [ 26.680678] EXT3 FS on dm-2, internal journal [ 26.680779] EXT3-fs: mounted filesystem with ordered data mode. [ 26.756772] Adding 2879480k swap on /dev/dm-1. Priority:-1 extents:1 across:2879480k [ 27.067158] type=1505 audit(1234523507.280:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2847 [ 27.270441] type=1505 audit(1234523507.484:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2852 [ 27.270749] type=1505 audit(1234523507.484:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2852 [ 27.329181] type=1505 audit(1234523507.544:5): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2856 [ 33.971911] [drm] Initialized drm 1.1.0 20060810 [ 33.982074] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 33.982084] pci 0000:00:02.0: setting latency timer to 64 [ 33.982279] pci 0000:00:02.0: irq 2300 for MSI/MSI-X [ 33.982415] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 34.761951] sky2 eth0: enabling interface [ 34.765164] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.766655] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 34.769066] iwl3945 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) [ 34.771287] iwl3945 0000:02:00.0: irq 2299 for MSI/MSI-X [ 34.773664] iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-1.ucode [ 34.867722] Registered led device: iwl-phy0:radio [ 34.867742] Registered led device: iwl-phy0:assoc [ 34.867795] Registered led device: iwl-phy0:RX [ 34.867812] Registered led device: iwl-phy0:TX [ 34.886961] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 48.116559] warning: `pulseaudio' uses 32-bit capabilities (legacy support in use) [ 91.669071] wlan0: authenticate with AP 00:1a:4f:8e:24:16 [ 91.670928] wlan0: authenticated [ 91.670935] wlan0: associate with AP 00:1a:4f:8e:24:16 [ 91.674669] wlan0: RX AssocResp from 00:1a:4f:8e:24:16 (capab=0x451 status=0 aid=2) [ 91.674675] wlan0: associated [ 91.680693] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 102.156246] wlan0: no IPv6 routers present [ 601.315947] CE: hpet increasing min_delta_ns to 15000 nsec [ 628.732708] CE: hpet increasing min_delta_ns to 22500 nsec [ 985.012070] sky2 eth0: disabling interface [ 985.393642] iwl3945 0000:02:00.0: PCI INT A disabled [ 985.395725] wlan0: disassociating by local choice (reason=3) [ 986.298321] PM: Syncing filesystems ... done. [ 986.320106] PM: Preparing system for mem sleep [ 986.320110] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 986.320999] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 986.321199] PM: Entering mem sleep [ 986.321214] Suspending console(s) (use no_console_suspend to debug) [ 986.973158] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 986.973767] sd 0:0:0:0: [sda] Stopping disk [ 987.973873] ACPI handle has no context! [ 987.973994] ricoh-mmc: Suspending. [ 987.974008] ricoh-mmc: Controller is now re-enabled. [ 987.974071] sdhci-pci 0000:04:09.2: PCI INT C disabled [ 987.988366] sdhci-pci 0000:04:09.2: power state changed by ACPI to D3 [ 988.008315] ohci1394 0000:04:09.1: power state changed by ACPI to D3 [ 988.040584] ata_piix 0000:00:1f.2: PCI INT B disabled [ 988.056591] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 988.072353] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 988.072458] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 988.072545] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 988.104295] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 988.120394] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 988.136360] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 988.136463] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 988.136707] PM: suspend devices took 1.816 seconds [ 988.136967] ACPI: Preparing to enter system sleep state S3 [ 988.143888] Disabling non-boot CPUs ... [ 988.146311] CPU 1 is now offline [ 988.146313] SMP alternatives: switching to UP code [ 988.282090] CPU0 attaching NULL sched-domain. [ 988.282093] CPU1 attaching NULL sched-domain. [ 988.288259] CPU0 attaching NULL sched-domain. [ 988.288428] CPU1 is down [ 988.288531] Extended CMOS year: 2000 [ 988.288531] Back to C! [ 988.288531] Extended CMOS year: 2000 [ 988.288531] Enabling non-boot CPUs ... [ 988.288531] SMP alternatives: switching to SMP code [ 988.423229] Booting processor 1 APIC 0x1 ip 0x6000 [ 988.281955] Initializing CPU#1 [ 988.281955] Calibrating delay using timer specific routine.. 3657.56 BogoMIPS (lpj=7315132) [ 988.281955] CPU: L1 I cache: 32K, L1 D cache: 32K [ 988.281955] CPU: L2 cache: 2048K [ 988.281955] CPU: Physical Processor ID: 0 [ 988.281955] CPU: Processor Core ID: 1 [ 988.512520] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 988.512549] CPU0 attaching NULL sched-domain. [ 988.513018] Switched to high resolution mode on CPU 1 [ 988.528903] CPU0 attaching sched-domain: [ 988.528905] domain 0: span 0-1 level MC [ 988.528907] groups: 0 1 [ 988.528911] CPU1 attaching sched-domain: [ 988.528912] domain 0: span 0-1 level MC [ 988.528913] groups: 1 0 [ 988.533016] CPU1 is up [ 988.533018] ACPI: Waking up from system sleep state S3 [ 988.707609] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 988.717371] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 988.717391] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403) [ 988.720304] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 988.720321] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 988.720326] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 988.720381] usb usb1: root hub lost power or was reset [ 988.720402] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 988.720407] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 988.720462] usb usb2: root hub lost power or was reset [ 988.736227] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 988.736235] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 988.752266] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 988.752276] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 988.752304] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 988.752313] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 988.841515] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x40105) [ 988.841549] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 988.841556] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 988.841615] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 988.841639] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020a) [ 988.841658] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 988.841668] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020) [ 988.841673] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 988.841683] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 988.841693] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 988.841753] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 988.841762] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 988.841767] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 988.841836] usb usb3: root hub lost power or was reset [ 988.841859] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 988.841864] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 988.841933] usb usb4: root hub lost power or was reset [ 988.841956] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 988.841962] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 988.842030] usb usb5: root hub lost power or was reset [ 988.856060] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 988.856068] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 988.856169] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0xc7f1c401) [ 988.856177] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040) [ 988.856184] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22803030) [ 988.856191] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20050400, writing 0x20080400) [ 988.856207] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) [ 988.856229] pci 0000:00:1e.0: setting latency timer to 64 [ 988.856283] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107) [ 988.872232] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x2ff) [ 988.872266] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00005, writing 0x2b80005) [ 988.872288] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 988.872295] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 988.874111] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xc2000000) [ 988.904261] sky2 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 988.904291] sky2 0000:03:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) [ 988.904303] sky2 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004) [ 988.904311] sky2 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 988.904322] sky2 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 988.904506] yenta_cardbus 0000:04:09.0: power state changed by ACPI to D0 [ 988.904518] yenta_cardbus 0000:04:09.0: restoring config space at offset 0xf (was 0x7000100, writing 0x58001ff) [ 988.904523] yenta_cardbus 0000:04:09.0: restoring config space at offset 0xe (was 0x0, writing 0x34fc) [ 988.904528] yenta_cardbus 0000:04:09.0: restoring config space at offset 0xd (was 0x0, writing 0x3400) [ 988.904534] yenta_cardbus 0000:04:09.0: restoring config space at offset 0xc (was 0x0, writing 0x30fc) [ 988.904539] yenta_cardbus 0000:04:09.0: restoring config space at offset 0xb (was 0x0, writing 0x3000) [ 988.904544] yenta_cardbus 0000:04:09.0: restoring config space at offset 0xa (was 0x0, writing 0xcbfff000) [ 988.904550] yenta_cardbus 0000:04:09.0: restoring config space at offset 0x9 (was 0x0, writing 0xc8000000) [ 988.904555] yenta_cardbus 0000:04:09.0: restoring config space at offset 0x8 (was 0x0, writing 0xc7fff000) [ 988.904560] yenta_cardbus 0000:04:09.0: restoring config space at offset 0x7 (was 0x0, writing 0xc4000000) [ 988.904565] yenta_cardbus 0000:04:09.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0080504) [ 988.904572] yenta_cardbus 0000:04:09.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0400000) [ 988.904577] yenta_cardbus 0000:04:09.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800) [ 989.044310] ohci1394 0000:04:09.1: power state changed by ACPI to D0 [ 989.044327] ohci1394 0000:04:09.1: restoring config space at offset 0xf (was 0x4020200, writing 0x40202ff) [ 989.044356] ohci1394 0000:04:09.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0401000) [ 989.044368] ohci1394 0000:04:09.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 989.097006] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[f0401000-f04017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 989.106106] sdhci-pci 0000:04:09.2: power state changed by ACPI to D0 [ 989.106118] sdhci-pci 0000:04:09.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff) [ 989.106141] sdhci-pci 0000:04:09.2: restoring config space at offset 0x4 (was 0x0, writing 0xf0401800) [ 989.106146] sdhci-pci 0000:04:09.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802000) [ 989.106152] sdhci-pci 0000:04:09.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 989.106211] sdhci-pci 0000:04:09.2: power state changed by ACPI to D0 [ 989.106218] sdhci-pci 0000:04:09.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 989.106221] sdhci-pci 0000:04:09.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 989.106232] ricoh-mmc: Resuming. [ 989.106246] ricoh-mmc: Controller is now disabled. [ 989.106258] pci 0000:04:09.4: restoring config space at offset 0xf (was 0x300, writing 0x3ff) [ 989.106280] pci 0000:04:09.4: restoring config space at offset 0x4 (was 0x0, writing 0xf0402400) [ 989.106288] pci 0000:04:09.4: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100102) [ 989.106451] sd 0:0:0:0: [sda] Starting disk [ 989.380651] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 989.380653] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 989.396590] ata2.00: configured for UDMA/33 [ 991.869479] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out [ 991.869481] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [ 992.117265] ata1.00: configured for UDMA/133 [ 992.146930] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 992.146965] sd 0:0:0:0: [sda] Write Protect is off [ 992.146969] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 992.147017] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 992.924227] usb 6-2: reset high speed USB device using ehci_hcd and address 2 [ 993.224060] usb 5-1: reset full speed USB device using uhci_hcd and address 2 [ 993.392115] pci 0000:00:02.0: setting latency timer to 64 [ 993.394400] PM: resume devices took 4.688 seconds [ 993.397964] PM: Finishing wakeup. [ 993.397965] Restarting tasks ... done. [ 993.637025] sky2 eth0: enabling interface [ 993.640229] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 993.643301] iwl3945 0000:02:00.0: enabling device (0000 -> 0002) [ 993.643315] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 993.643384] iwl3945 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 993.643452] iwl3945 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0300000) [ 993.643466] iwl3945 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 993.643485] iwl3945 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) [ 993.643662] iwl3945 0000:02:00.0: irq 2299 for MSI/MSI-X [ 993.712113] Registered led device: iwl-phy0:radio [ 993.713218] Registered led device: iwl-phy0:assoc [ 993.713251] Registered led device: iwl-phy0:RX [ 993.713274] Registered led device: iwl-phy0:TX [ 993.740023] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1014.628162] wlan0: authenticate with AP 00:1a:4f:8e:24:16 [ 1014.629996] wlan0: authenticated [ 1014.630002] wlan0: associate with AP 00:1a:4f:8e:24:16 [ 1014.633824] wlan0: RX AssocResp from 00:1a:4f:8e:24:16 (capab=0x451 status=0 aid=2) [ 1014.633830] wlan0: associated [ 1014.637570] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1025.568238] wlan0: no IPv6 routers present