[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe60000 (usable) [ 0.000000] BIOS-e820: 000000003fe60000 - 000000003fe75000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fe75000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x3fe60 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 37823000 - 37fefd71 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F8260, 0014 (r0 TOSCPL) [ 0.000000] ACPI: RSDT 3FE6E887, 004C (r1 TOSCPL Capell00 6040000 LTP 0) [ 0.000000] ACPI: FACP 3FE74DEE, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: DSDT 3FE6FED4, 4F1A (r1 TOSCPL CALISTGA 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 3FE75FC0, 0040 [ 0.000000] ACPI: APIC 3FE74E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 3FE74ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 3FE74F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA 3FE74F3E, 0032 (r1 Intel CALISTG 6040000 5A52) [ 0.000000] ACPI: APIC 3FE74F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3FE74FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 3FE6F885, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 3FE6F1F3, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 3FE6E8D3, 04E2 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Compal [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20] [ 0.000000] #4 [0037823000 - 0037fefd71] RAMDISK ==> [0037823000 - 0037fefd71] [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000] [ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f82f0] 000f82f0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x0003fe60 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fe60 [ 0.000000] On node 0 totalpages: 261631 [ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000 [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 32067 pages, LIFO batch:7 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259330 [ 0.000000] Kernel command line: root=UUID=d30275cb-a445-4e3b-a7d5-25e19094bbf0 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2161.207 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1023272k/1046912k available (2572k kernel code, 23012k reserved, 1160k data, 424k init, 129408k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) [ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB) [ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.41 BogoMIPS (lpj=8644828) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.018047] ACPI: Core revision 20080609 [ 0.020074] ACPI: Checking initramfs for custom DSDT [ 0.340263] ENABLING IO-APIC IRQs [ 0.340456] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.381391] CPU0: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 0.384024] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4322.56 BogoMIPS (lpj=8645128) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.468516] CPU1: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 0.468535] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.472052] Brought up 2 CPUs [ 0.472056] Total of 2 processors activated (8644.97 BogoMIPS). [ 0.472079] CPU0 attaching sched-domain: [ 0.472082] domain 0: span 0-1 level MC [ 0.472085] groups: 0 1 [ 0.472091] CPU1 attaching sched-domain: [ 0.472093] domain 0: span 0-1 level MC [ 0.472095] groups: 1 0 [ 0.472177] net_namespace: 840 bytes [ 0.472177] Booting paravirtualized kernel on bare hardware [ 0.472285] Time: 17:10:58 Date: 11/06/08 [ 0.472313] NET: Registered protocol family 16 [ 0.472332] EISA bus registered [ 0.472332] ACPI: bus type pci registered [ 0.472332] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.472332] PCI: MCFG area at e0000000 reserved in E820 [ 0.472332] PCI: Using MMCONFIG for extended config space [ 0.472332] PCI: Using configuration type 1 for base access [ 0.472980] ACPI: EC: Look up EC in DSDT [ 0.478845] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.479351] ACPI: Interpreter enabled [ 0.479354] ACPI: (supports S0 S3 S4 S5) [ 0.479369] ACPI: Using IOAPIC for interrupt routing [ 0.484452] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.484452] ACPI: EC: driver started in poll mode [ 0.484452] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.484452] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.484452] pci 0000:00:01.0: PME# disabled [ 0.484452] PCI: 0000:00:1b.0 reg 10 64bit mmio: [d2500000, d2503fff] [ 0.484452] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.484452] pci 0000:00:1b.0: PME# disabled [ 0.484452] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.484452] pci 0000:00:1c.0: PME# disabled [ 0.484452] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.484452] pci 0000:00:1c.2: PME# disabled [ 0.484457] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.484462] pci 0000:00:1c.3: PME# disabled [ 0.484510] PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f] [ 0.484571] PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f] [ 0.484630] PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f] [ 0.484690] PCI: 0000:00:1d.3 reg 20 io port: [1860, 187f] [ 0.484753] PCI: 0000:00:1d.7 reg 10 32bit mmio: [d2504000, d25043ff] [ 0.484807] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.484813] pci 0000:00:1d.7: PME# disabled [ 0.484964] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.484969] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.485010] PCI: 0000:00:1f.2 reg 10 io port: [0, 7] [ 0.485018] PCI: 0000:00:1f.2 reg 14 io port: [0, 3] [ 0.485026] PCI: 0000:00:1f.2 reg 18 io port: [0, 7] [ 0.485034] PCI: 0000:00:1f.2 reg 1c io port: [0, 3] [ 0.485041] PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf] [ 0.485071] pci 0000:00:1f.2: PME# supported from D3hot [ 0.485076] pci 0000:00:1f.2: PME# disabled [ 0.485130] PCI: 0000:00:1f.3 reg 20 io port: [18c0, 18df] [ 0.485231] PCI: 0000:01:00.0 reg 10 32bit mmio: [d1000000, d1ffffff] [ 0.485245] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, cfffffff] [ 0.485279] PCI: 0000:01:00.0 reg 1c 64bit mmio: [d0000000, d0ffffff] [ 0.485292] PCI: 0000:01:00.0 reg 24 io port: [2000, 207f] [ 0.485305] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.485390] PCI: bridge 0000:00:01.0 io port: [2000, 2fff] [ 0.485393] PCI: bridge 0000:00:01.0 32bit mmio: [d0000000, d1ffffff] [ 0.485398] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff] [ 0.485540] PCI: 0000:02:00.0 reg 10 32bit mmio: [d2100000, d2100fff] [ 0.485744] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.485757] pci 0000:02:00.0: PME# disabled [ 0.485809] PCI: bridge 0000:00:1c.0 32bit mmio: [d2100000, d21fffff] [ 0.485888] PCI: 0000:04:00.0 reg 10 io port: [3000, 30ff] [ 0.485917] PCI: 0000:04:00.0 reg 18 64bit mmio: [d2200000, d2200fff] [ 0.485946] PCI: 0000:04:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.485973] pci 0000:04:00.0: supports D1 [ 0.485975] pci 0000:04:00.0: supports D2 [ 0.485977] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.485984] pci 0000:04:00.0: PME# disabled [ 0.486032] PCI: bridge 0000:00:1c.2 io port: [3000, 3fff] [ 0.486037] PCI: bridge 0000:00:1c.2 32bit mmio: [d2200000, d22fffff] [ 0.486100] PCI: bridge 0000:00:1c.3 io port: [0, fff] [ 0.486104] PCI: bridge 0000:00:1c.3 32bit mmio: [0, fffff] [ 0.486166] PCI: 0000:06:04.0 reg 10 32bit mmio: [d2000000, d2000fff] [ 0.486187] pci 0000:06:04.0: supports D1 [ 0.486188] pci 0000:06:04.0: supports D2 [ 0.486191] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.486196] pci 0000:06:04.0: PME# disabled [ 0.486236] PCI: 0000:06:04.1 reg 10 32bit mmio: [d2001000, d200107f] [ 0.486300] pci 0000:06:04.1: supports D1 [ 0.486301] pci 0000:06:04.1: supports D2 [ 0.486304] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot [ 0.486309] pci 0000:06:04.1: PME# disabled [ 0.486350] PCI: 0000:06:04.2 reg 10 32bit mmio: [d2001400, d20014ff] [ 0.486413] pci 0000:06:04.2: supports D1 [ 0.486414] pci 0000:06:04.2: supports D2 [ 0.486416] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot [ 0.486422] pci 0000:06:04.2: PME# disabled [ 0.486464] PCI: 0000:06:04.4 reg 10 32bit mmio: [0, ff] [ 0.486527] pci 0000:06:04.4: supports D1 [ 0.486528] pci 0000:06:04.4: supports D2 [ 0.486531] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot [ 0.486536] pci 0000:06:04.4: PME# disabled [ 0.486592] pci 0000:00:1e.0: transparent bridge [ 0.486600] PCI: bridge 0000:00:1e.0 32bit mmio: [d2000000, d20fffff] [ 0.486655] bus 00 -> node 0 [ 0.486662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.488064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.488219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.488370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.488519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.488677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.496135] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.496257] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.496376] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.496496] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.496615] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.496735] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.496855] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.496974] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.497045] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.497045] pnp: PnP ACPI init [ 0.497045] ACPI: bus type pnp registered [ 0.500058] pnp 00:07: io resource (0x2e-0x2f) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500062] pnp 00:07: io resource (0x61-0x61) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500065] pnp 00:07: io resource (0x63-0x63) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500068] pnp 00:07: io resource (0x65-0x65) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500072] pnp 00:07: io resource (0x67-0x67) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500075] pnp 00:07: io resource (0x70-0x70) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500078] pnp 00:07: io resource (0x80-0x80) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500082] pnp 00:07: io resource (0x92-0x92) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500085] pnp 00:07: io resource (0xb2-0xb3) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500089] pnp 00:07: io resource (0x800-0x80f) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 0.500172] pnp: PnP ACPI: found 11 devices [ 0.500172] ACPI: ACPI bus type pnp unregistered [ 0.500172] PnPBIOS: Disabled by ACPI PNP [ 0.500172] PCI: Using ACPI for IRQ routing [ 0.500172] pci 0000:00:1c.3: BAR 7: can't allocate resource [ 0.500172] pci 0000:00:1c.3: BAR 8: can't allocate resource [ 0.508040] NET: Registered protocol family 8 [ 0.508042] NET: Registered protocol family 20 [ 0.508058] NetLabel: Initializing [ 0.508058] NetLabel: domain hash size = 128 [ 0.508058] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.508069] NetLabel: unlabeled traffic allowed by default [ 0.508077] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.508081] hpet0: 3 64-bit timers, 14318180 Hz [ 0.509578] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.509581] actual entries 65620 [ 0.509664] AppArmor: AppArmor Filesystem Enabled [ 0.509691] ACPI: RTC can wake from S4 [ 0.512042] Switched to high resolution mode on CPU 0 [ 0.512556] Switched to high resolution mode on CPU 1 [ 0.516021] system 00:01: ioport range 0xfe00-0xfe7f has been reserved [ 0.516024] system 00:01: ioport range 0xfe80-0xfeff has been reserved [ 0.516027] system 00:01: ioport range 0xff00-0xff7f has been reserved [ 0.516030] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.516033] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.516036] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.516039] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 0.516043] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.516046] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.516049] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.516057] system 00:05: iomem range 0xfed00000-0xfed003ff could not be reserved [ 0.516064] system 00:07: ioport range 0x1000-0x107f has been reserved [ 0.516067] system 00:07: ioport range 0x1180-0x11bf has been reserved [ 0.551232] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff] [ 0.551235] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.551238] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.551242] pci 0000:00:01.0: MEM window: 0xd0000000-0xd1ffffff [ 0.551246] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.551251] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.551253] pci 0000:00:1c.0: IO window: disabled [ 0.551259] pci 0000:00:1c.0: MEM window: 0xd2100000-0xd21fffff [ 0.551264] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.551273] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.551276] pci 0000:00:1c.2: IO window: 0x3000-0x3fff [ 0.551283] pci 0000:00:1c.2: MEM window: 0xd2200000-0xd22fffff [ 0.551288] pci 0000:00:1c.2: PREFETCH window: 0x00000054000000-0x000000540fffff [ 0.551296] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.551298] pci 0000:00:1c.3: IO window: disabled [ 0.551304] pci 0000:00:1c.3: MEM window: disabled [ 0.551309] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.551323] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 [ 0.551325] pci 0000:06:04.0: IO window: 0x004000-0x0040ff [ 0.551331] pci 0000:06:04.0: IO window: 0x004400-0x0044ff [ 0.551336] pci 0000:06:04.0: PREFETCH window: 0x50000000-0x53ffffff [ 0.551342] pci 0000:06:04.0: MEM window: 0x58000000-0x5bffffff [ 0.551348] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.551352] pci 0000:00:1e.0: IO window: 0x4000-0x4fff [ 0.551358] pci 0000:00:1e.0: MEM window: 0xd2000000-0xd20fffff [ 0.551364] pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000053ffffff [ 0.551379] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.551383] pci 0000:00:01.0: setting latency timer to 64 [ 0.551393] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.551398] pci 0000:00:1c.0: setting latency timer to 64 [ 0.551407] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.551413] pci 0000:00:1c.2: setting latency timer to 64 [ 0.551422] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.551428] pci 0000:00:1c.3: setting latency timer to 64 [ 0.551434] pci 0000:00:1e.0: enabling device (0004 -> 0007) [ 0.551441] pci 0000:00:1e.0: setting latency timer to 64 [ 0.551451] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.551457] bus: 00 index 0 io port: [0, ffff] [ 0.551459] bus: 00 index 1 mmio: [0, ffffffff] [ 0.551462] bus: 01 index 0 io port: [2000, 2fff] [ 0.551464] bus: 01 index 1 mmio: [d0000000, d1ffffff] [ 0.551466] bus: 01 index 2 mmio: [c0000000, cfffffff] [ 0.551468] bus: 01 index 3 mmio: [0, 0] [ 0.551470] bus: 02 index 0 mmio: [0, 0] [ 0.551472] bus: 02 index 1 mmio: [d2100000, d21fffff] [ 0.551474] bus: 02 index 2 mmio: [0, 0] [ 0.551476] bus: 02 index 3 mmio: [0, 0] [ 0.551478] bus: 04 index 0 io port: [3000, 3fff] [ 0.551481] bus: 04 index 1 mmio: [d2200000, d22fffff] [ 0.551483] bus: 04 index 2 mmio: [54000000, 540fffff] [ 0.551485] bus: 04 index 3 mmio: [0, 0] [ 0.551487] bus: 05 index 0 mmio: [0, fff] [ 0.551489] bus: 05 index 1 mmio: [0, fffff] [ 0.551491] bus: 05 index 2 mmio: [0, 0] [ 0.551493] bus: 05 index 3 mmio: [0, 0] [ 0.551495] bus: 06 index 0 io port: [4000, 4fff] [ 0.551498] bus: 06 index 1 mmio: [d2000000, d20fffff] [ 0.551500] bus: 06 index 2 mmio: [50000000, 53ffffff] [ 0.551502] bus: 06 index 3 io port: [0, ffff] [ 0.551504] bus: 06 index 4 mmio: [0, ffffffff] [ 0.551506] bus: 07 index 0 io port: [4000, 40ff] [ 0.551509] bus: 07 index 1 io port: [4400, 44ff] [ 0.551511] bus: 07 index 2 mmio: [50000000, 53ffffff] [ 0.551513] bus: 07 index 3 mmio: [58000000, 5bffffff] [ 0.551522] NET: Registered protocol family 2 [ 0.564048] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.564267] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.564747] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.565020] TCP: Hash tables configured (established 131072 bind 65536) [ 0.565023] TCP reno registered [ 0.572095] NET: Registered protocol family 1 [ 0.572207] checking if image is initramfs...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.883460] it is [ 1.221382] Freeing initrd memory: 7987k freed [ 1.221603] Simple Boot Flag at 0x36 set to 0x1 [ 1.222616] audit: initializing netlink socket (disabled) [ 1.222641] type=2000 audit(1225991458.221:1): initialized [ 1.228424] highmem bounce pool size: 64 pages [ 1.228430] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.231007] VFS: Disk quotas dquot_6.5.1 [ 1.231097] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.231202] msgmni has been set to 1761 [ 1.231324] io scheduler noop registered [ 1.231327] io scheduler anticipatory registered [ 1.231329] io scheduler deadline registered [ 1.231341] io scheduler cfq registered (default) [ 1.231478] pci 0000:01:00.0: Boot video device [ 1.231598] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.231631] pcieport-driver 0000:00:01.0: found MSI capability [ 1.231661] pci_express 0000:00:01.0:pcie00: allocate port service [ 1.231710] pci_express 0000:00:01.0:pcie03: allocate port service [ 1.231798] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.231844] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.231889] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.231937] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.231982] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.232094] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.232140] pcieport-driver 0000:00:1c.2: found MSI capability [ 1.232185] pci_express 0000:00:1c.2:pcie00: allocate port service [ 1.232232] pci_express 0000:00:1c.2:pcie02: allocate port service [ 1.232276] pci_express 0000:00:1c.2:pcie03: allocate port service [ 1.232387] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.232432] pcieport-driver 0000:00:1c.3: found MSI capability [ 1.232477] pci_express 0000:00:1c.3:pcie00: allocate port service [ 1.232522] pci_express 0000:00:1c.3:pcie02: allocate port service [ 1.232566] pci_express 0000:00:1c.3:pcie03: allocate port service [ 1.232935] isapnp: Scanning for PnP cards... [ 1.587367] isapnp: No Plug & Play device found [ 1.623216] hpet_resources: 0xfed00000 is busy [ 1.623286] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.625597] brd: module loaded [ 1.625669] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.625784] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.649764] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.668737] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.668743] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.668746] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.668748] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.668751] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.668986] mice: PS/2 mouse device common for all mice [ 1.671350] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.671381] rtc0: alarms up to one month, y3k, hpet irqs [ 1.671521] EISA: Probing bus 0 at eisa.0 [ 1.671528] Cannot allocate resource for EISA slot 1 [ 1.671531] Cannot allocate resource for EISA slot 2 [ 1.671533] Cannot allocate resource for EISA slot 3 [ 1.671536] Cannot allocate resource for EISA slot 4 [ 1.671553] EISA: Detected 0 cards. [ 1.671557] cpuidle: using governor ladder [ 1.671559] cpuidle: using governor menu [ 1.672063] TCP cubic registered [ 1.672090] Using IPI No-Shortcut mode [ 1.672268] registered taskstats version 1 [ 1.672379] Magic number: 0:899:187 [ 1.672496] rtc_cmos 00:08: setting system clock to 2008-11-06 17:10:59 UTC (1225991459) [ 1.672500] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.672502] EDD information not available. [ 1.672740] Freeing unused kernel memory: 424k freed [ 1.672784] Write protecting the kernel text: 2576k [ 1.672812] Write protecting the kernel read-only data: 936k [ 1.694508] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.833830] fuse init (API version 7.9) [ 1.872514] ACPI: SSDT 3FE6EF98, 01DE (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 1.872895] ACPI: SSDT 3FE6EDB5, 015E (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 1.873714] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.873774] processor ACPI0007:00: registered as cooling_device0 [ 1.874139] ACPI: SSDT 3FE6F176, 007D (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 1.874491] ACPI: SSDT 3FE6EF13, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 1.875100] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.875147] processor ACPI0007:01: registered as cooling_device1 [ 1.888004] Marking TSC unstable due to TSC halts in idle [ 2.165928] usbcore: registered new interface driver usbfs [ 2.165956] usbcore: registered new interface driver hub [ 2.166018] usbcore: registered new device driver usb [ 2.170421] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.170444] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.170464] r8169 0000:04:00.0: setting latency timer to 64 [ 2.170837] eth0: RTL8168b/8111b at 0xf8856000, 00:16:d4:0f:ce:aa, XID 38000000 IRQ 219 [ 2.172137] USB Universal Host Controller Interface driver v3.0 [ 2.172405] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.172412] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.172416] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.172455] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.172492] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 [ 2.172663] usb usb1: configuration #1 chosen from 1 choice [ 2.172690] hub 1-0:1.0: USB hub found [ 2.172697] hub 1-0:1.0: 2 ports detected [ 2.268299] No dock devices found. [ 2.299274] SCSI subsystem initialized [ 2.326051] libata version 3.00 loaded. [ 2.385323] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.385334] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.385338] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.385364] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 2.385403] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 2.385504] usb usb2: configuration #1 chosen from 1 choice [ 2.385532] hub 2-0:1.0: USB hub found [ 2.385538] hub 2-0:1.0: 2 ports detected [ 2.497029] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 2.592549] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.592560] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.592564] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.592589] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 2.592628] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 2.592722] usb usb3: configuration #1 chosen from 1 choice [ 2.592749] hub 3-0:1.0: USB hub found [ 2.592755] hub 3-0:1.0: 2 ports detected [ 2.657690] usb 1-2: configuration #1 chosen from 1 choice [ 2.772122] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 2.800429] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2.800443] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.800450] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.800505] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 2.800538] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 2.800621] usb usb4: configuration #1 chosen from 1 choice [ 2.800646] hub 4-0:1.0: USB hub found [ 2.800652] hub 4-0:1.0: 2 ports detected [ 2.904679] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.904692] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.904696] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.904720] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 2.908620] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.908628] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.908636] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2504000 [ 2.924026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.924247] usb usb5: configuration #1 chosen from 1 choice [ 2.924276] hub 5-0:1.0: USB hub found [ 2.924284] hub 5-0:1.0: 8 ports detected [ 2.924453] usb 2-2: device descriptor read/all, error -71 [ 2.980166] hub 2-0:1.0: unable to enumerate USB device on port 2 [ 3.000123] Clocksource tsc unstable (delta = -293354563 ns) [ 3.128586] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.128618] pata_acpi 0000:00:1f.2: setting latency timer to 64 [ 3.128633] pata_acpi 0000:00:1f.2: PCI INT B disabled [ 3.132268] ata_piix 0000:00:1f.2: version 2.12 [ 3.132277] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.132281] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 3.288165] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3.288377] scsi0 : ata_piix [ 3.288709] scsi1 : ata_piix [ 3.289851] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 [ 3.289854] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 [ 3.352124] usb 5-4: new high speed USB device using ehci_hcd and address 3 [ 3.452713] ata1.00: ATA-7: FUJITSU MHV2080BH, 00000028, max UDMA/100 [ 3.452716] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.468648] ata1.00: configured for UDMA/100 [ 3.487007] usb 5-4: configuration #1 chosen from 1 choice [ 3.600167] usb 1-2: USB disconnect, address 2 [ 3.632709] ata2.00: ATAPI: UJDA770 DVD/CDRW, 1.00, max UDMA/33 [ 3.648642] ata2.00: configured for UDMA/33 [ 3.648783] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0000 PQ: 0 ANSI: 5 [ 3.650398] scsi 1:0:0:0: CD-ROM MATSHITA UJDA770 DVD/CDRW 1.00 PQ: 0 ANSI: 5 [ 3.663155] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.663193] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.677719] Driver 'sr' needs updating - please use bus_type methods [ 3.680940] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 3.680944] Uniform CD-ROM driver Revision: 3.20 [ 3.681030] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.682396] Driver 'sd' needs updating - please use bus_type methods [ 3.682478] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 3.682501] sd 0:0:0:0: [sda] Write Protect is off [ 3.682503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.682541] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.682614] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 3.682635] sd 0:0:0:0: [sda] Write Protect is off [ 3.682638] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.682675] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.682679] sda: sda1 sda2 < sda5 > [ 3.787988] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.840061] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 3.973012] PM: Starting manual resume from disk [ 3.973016] PM: Resume from partition 8:5 [ 3.973017] PM: Checking hibernation image. [ 3.973272] PM: Resume from disk failed. [ 3.993447] EXT3-fs: INFO: recovery required on readonly filesystem. [ 3.993455] EXT3-fs: write access will be enabled during recovery. [ 4.005705] usb 1-2: configuration #1 chosen from 1 choice [ 4.248224] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 4.396327] kjournald starting. Commit interval 5 seconds [ 4.396362] EXT3-fs: sda1: orphan cleanup on readonly fs [ 4.396373] ext3_orphan_cleanup: deleting unreferenced inode 3956785 [ 4.396434] ext3_orphan_cleanup: deleting unreferenced inode 3956758 [ 4.396448] EXT3-fs: sda1: 2 orphan inodes deleted [ 4.396453] EXT3-fs: recovery complete. [ 4.409851] usb 3-2: configuration #1 chosen from 1 choice [ 4.410373] EXT3-fs: mounted filesystem with ordered data mode. [ 11.077611] udevd version 124 started [ 11.543741] Linux agpgart interface v0.103 [ 11.679250] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.747708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.756435] iTCO_vendor_support: vendor-support=0 [ 11.812869] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 11.812964] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 11.813115] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.877356] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 11.908037] ACPI: Power Button (FF) [PWRF] [ 11.908124] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 11.908202] ACPI: Lid Switch [LID0] [ 11.908250] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 11.940036] ACPI: Power Button (CM) [PWRB] [ 12.185578] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5 [ 12.216028] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 12.216432] acpi device:0a: registered as cooling_device2 [ 12.216593] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input6 [ 12.237044] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 12.239601] ACPI: AC Adapter [ACAD] (on-line) [ 12.262269] intel_rng: FWH not detected [ 12.326509] Yenta: CardBus bridge found at 0000:06:04.0 [14c0:0020] [ 12.326537] Yenta: Using CSCINT to route CSC interrupts to PCI [ 12.326539] Yenta: Routing CardBus interrupts to PCI [ 12.326545] Yenta TI: socket 0000:06:04.0, mfunc 0x88501212, devctl 0x44 [ 12.462967] tpm_inf_pnp 00:02: Found TPM with ID IFX0102 [ 12.463020] tpm_inf_pnp 00:02: TPM found: config base 0x4e, data base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 12.556890] sdhci: Secure Digital Host Controller Interface driver [ 12.556894] sdhci: Copyright(c) Pierre Ossman [ 12.560827] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 12.560832] Socket status: 30000006 [ 12.560836] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 12.560843] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 12.560846] cs: IO port probe 0x4000-0x4fff: clean. [ 12.561062] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff [ 12.561065] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 12.668618] Bluetooth: Core ver 2.13 [ 12.673387] NET: Registered protocol family 31 [ 12.673390] Bluetooth: HCI device and connection manager initialized [ 12.673394] Bluetooth: HCI socket layer initialized [ 12.744642] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) [ 12.744658] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) [ 12.744666] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 12.744747] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO [ 12.747760] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) [ 12.747772] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) [ 12.747778] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 12.747820] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO [ 12.816239] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 12.817114] usbcore: registered new interface driver btusb [ 12.843999] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 12.914008] mmc0: new high speed SD card at address b368 [ 12.953511] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 12.953515] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 12.954135] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.954150] iwl3945 0000:02:00.0: setting latency timer to 64 [ 12.954175] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 12.978486] ACPI: Battery Slot [BAT1] (battery present) [ 13.054192] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 13.059045] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 13.318776] iwl3945 0000:02:00.0: PCI INT A disabled [ 13.490743] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.490780] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.525947] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 13.829518] mmcblk0: mmc0:b368 SD 993792KiB [ 13.829570] mmcblk0: p1 [ 13.873041] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input8 [ 14.072903] NET: Registered protocol family 10 [ 14.073407] lo: Disabled Privacy Extensions [ 14.140270] cs: IO port probe 0x100-0x3af: clean. [ 14.142328] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 14.143161] cs: IO port probe 0x820-0x8ff: clean. [ 14.143840] cs: IO port probe 0xc00-0xcf7: clean. [ 14.144730] cs: IO port probe 0xa00-0xaff: clean. [ 15.018163] loop: module loaded [ 15.069278] lp: driver loaded but no devices found [ 15.238650] Adding 3020180k swap on /dev/sda5. Priority:-1 extents:1 across:3020180k [ 15.779540] EXT3 FS on sda1, internal journal [ 16.662210] type=1505 audit(1225991474.747:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4298 [ 16.831235] type=1505 audit(1225991474.916:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4303 [ 16.831448] type=1505 audit(1225991474.916:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4303 [ 16.968337] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.510817] ACPI: WMI: Mapper loaded [ 18.380279] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 18.648265] apm: BIOS not found. [ 18.878080] ppdev: user-space parallel port driver [ 20.946920] Bluetooth: L2CAP ver 2.11 [ 20.946934] Bluetooth: L2CAP socket layer initialized [ 20.963479] Bluetooth: SCO (Voice Link) ver 0.6 [ 20.963493] Bluetooth: SCO socket layer initialized [ 20.986110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.986123] Bluetooth: BNEP filters: protocol multicast [ 20.998325] Bluetooth: RFCOMM socket layer initialized [ 20.998349] Bluetooth: RFCOMM TTY layer initialized [ 20.998354] Bluetooth: RFCOMM ver 1.10 [ 21.029605] Bridge firewalling registered [ 21.030024] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 25.177019] r8169: eth0: link up [ 25.177038] r8169: eth0: link up [ 25.181483] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.181688] iwl3945 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 25.181999] firmware: requesting iwlwifi-3945-1.ucode [ 25.288631] Registered led device: iwl-phy0:radio [ 25.288677] Registered led device: iwl-phy0:assoc [ 25.288756] Registered led device: iwl-phy0:RX [ 25.288789] Registered led device: iwl-phy0:TX [ 25.298678] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.519833] NET: Registered protocol family 17 [ 28.155784] wlan0: authenticate with AP 00:0f:3d:e9:05:27 [ 28.352135] wlan0: authenticate with AP 00:0f:3d:e9:05:27 [ 28.552100] wlan0: authenticate with AP 00:0f:3d:e9:05:27 [ 28.756022] wlan0: authentication with AP 00:0f:3d:e9:05:27 timed out [ 35.324012] eth0: no IPv6 routers present [ 48.752732] CPU0 attaching NULL sched-domain. [ 48.752749] CPU1 attaching NULL sched-domain. [ 48.756285] CPU0 attaching sched-domain: [ 48.756294] domain 0: span 0-1 level MC [ 48.756300] groups: 0 1 [ 48.756310] CPU1 attaching sched-domain: [ 48.756318] domain 0: span 0-1 level MC [ 48.756323] groups: 1 0 [ 51.553084] ACPI: EC: missing confirmations, switch off interrupt mode. [ 52.072068] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609] [ 52.072097] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node f7419b70), AE_TIME [ 52.072199] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609] [ 108.666045] iwl3945 0000:02:00.0: PCI INT A disabled [ 108.849112] r8169 0000:04:00.0: PCI INT A disabled [ 111.675633] PM: Syncing filesystems ... done. [ 111.697882] PM: Preparing system for mem sleep [ 111.697885] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 111.699150] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 111.699214] PM: Entering mem sleep [ 111.699217] Suspending console(s) (use no_console_suspend to debug) [ 111.717568] btusb_intr_complete: hci0 urb f6438d00 failed to resubmit (2) [ 111.984181] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 112.014005] sd 0:0:0:0: [sda] Stopping disk [ 113.512474] ACPI handle has no context! [ 113.512568] ACPI handle has no context! [ 113.512579] sdhci-pci 0000:06:04.4: PCI INT B disabled [ 113.512589] ACPI handle has no context! [ 113.528142] mmc0: card b368 removed [ 113.528626] MMC: killing requests for dead queue [ 113.528794] ACPI handle has no context! [ 113.528803] sdhci-pci 0000:06:04.2: PCI INT B disabled [ 113.528813] ACPI handle has no context! [ 113.544907] ata_piix 0000:00:1f.2: PCI INT B disabled [ 113.560281] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 113.576202] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 113.576250] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 113.576295] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 113.576340] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 113.608140] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 113.624327] PM: suspend devices took 1.928 seconds [ 113.624759] ACPI: Preparing to enter system sleep state S3 [ 113.625237] Disabling non-boot CPUs ... [ 113.728060] CPU 1 is now offline [ 113.728067] SMP alternatives: switching to UP code [ 113.740238] CPU0 attaching NULL sched-domain. [ 113.740244] CPU1 attaching NULL sched-domain. [ 113.740305] CPU0 attaching sched-domain: [ 113.740310] domain 0: span 0 level CPU [ 113.740314] groups: 0 [ 113.740677] CPU1 is down [ 113.740677] Back to C! [ 113.815475] Enabling non-boot CPUs ... [ 113.815837] SMP alternatives: switching to SMP code [ 113.828237] Booting processor 1/1 ip 6000 [ 113.629537] Initializing CPU#1 [ 113.629537] Calibrating delay using timer specific routine.. 4322.61 BogoMIPS (lpj=8645229) [ 113.629537] CPU: L1 I cache: 32K, L1 D cache: 32K [ 113.629537] CPU: L2 cache: 2048K [ 113.629537] CPU: Physical Processor ID: 0 [ 113.629537] CPU: Processor Core ID: 1 [ 113.916811] CPU1: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [ 113.916903] CPU0 attaching NULL sched-domain. [ 113.920034] Switched to high resolution mode on CPU 1 [ 113.924020] CPU0 attaching sched-domain: [ 113.924023] domain 0: span 0-1 level MC [ 113.924025] groups: 0 1 [ 113.924029] CPU1 attaching sched-domain: [ 113.924031] domain 0: span 0-1 level MC [ 113.924032] groups: 1 0 [ 113.924452] CPU1 is up [ 113.924454] ACPI: Waking up from system sleep state S3 [ 113.924822] APIC error on CPU0: 00(40) [ 114.000780] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 114.019663] pcieport-driver 0000:00:01.0: restoring config space at offset 0xf (was 0x140107, writing 0x1c0107) [ 114.019685] pcieport-driver 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 114.019720] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 114.032192] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 114.032225] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 114.032235] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 114.032384] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200) [ 114.032401] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 114.032454] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 114.032576] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x54015401) [ 114.032588] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030) [ 114.032606] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 114.032659] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 114.032785] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x6 (was 0x0, writing 0x50500) [ 114.032802] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100007, writing 0x100404) [ 114.032855] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 114.032956] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 114.032964] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 114.033046] usb usb1: root hub lost power or was reset [ 114.033173] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 114.033181] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 114.033244] usb usb2: root hub lost power or was reset [ 114.033353] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 114.033361] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 114.033423] usb usb3: root hub lost power or was reset [ 114.033550] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 114.033558] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 114.033619] usb usb4: root hub lost power or was reset [ 114.048125] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 114.048134] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 114.048334] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x53f15001) [ 114.048345] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22804040) [ 114.048354] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20070600, writing 0x200a0600) [ 114.048371] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100007) [ 114.048395] pci 0000:00:1e.0: setting latency timer to 64 [ 114.064177] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 114.064185] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 114.064510] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 114.064549] pci 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x2001) [ 114.064568] pci 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xd0000004) [ 114.064587] pci 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xc000000c) [ 114.064601] pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xd1000000) [ 114.064615] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 114.064634] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 114.064943] pci 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 114.065029] pci 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xd2100000) [ 114.065046] pci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 114.065068] pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 114.065160] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 114.065396] pci 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 114.065428] pci 0000:04:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xd2200004) [ 114.065441] pci 0000:04:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001) [ 114.065452] pci 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 114.065465] pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100003) [ 114.065790] yenta_cardbus 0000:06:04.0: restoring config space at offset 0xf (was 0x7400107, writing 0x5c00107) [ 114.065800] yenta_cardbus 0000:06:04.0: restoring config space at offset 0xe (was 0x0, writing 0x44fc) [ 114.065810] yenta_cardbus 0000:06:04.0: restoring config space at offset 0xd (was 0x0, writing 0x4400) [ 114.065819] yenta_cardbus 0000:06:04.0: restoring config space at offset 0xc (was 0x0, writing 0x40fc) [ 114.065829] yenta_cardbus 0000:06:04.0: restoring config space at offset 0xb (was 0x0, writing 0x4000) [ 114.065839] yenta_cardbus 0000:06:04.0: restoring config space at offset 0xa (was 0x0, writing 0x5bfff000) [ 114.065850] yenta_cardbus 0000:06:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x58000000) [ 114.065864] yenta_cardbus 0000:06:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x53fff000) [ 114.065877] yenta_cardbus 0000:06:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x50000000) [ 114.065889] yenta_cardbus 0000:06:04.0: restoring config space at offset 0x6 (was 0x20070706, writing 0xb00a0706) [ 114.065909] yenta_cardbus 0000:06:04.0: restoring config space at offset 0x3 (was 0x824008, writing 0x82a820) [ 114.220229] sdhci-pci 0000:06:04.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002) [ 114.220263] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 114.228694] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 114.228701] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 114.236184] sdhci-pci 0000:06:04.4: restoring config space at offset 0x4 (was 0x0, writing 0xd2001100) [ 114.236202] sdhci-pci 0000:06:04.4: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002) [ 114.236237] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 114.244974] ata2.00: configured for UDMA/33 [ 114.394649] mmc0: new high speed SD card at address b368 [ 114.394700] mmc mmc0:b368: parent mmc0 should not be sleeping [ 114.394926] mmcblk1: mmc0:b368 SD 993792KiB [ 114.395008] mmcblk1: p1 [ 115.196164] usb 5-4: reset high speed USB device using ehci_hcd and address 3 [ 115.331409] sd 0:0:0:0: [sda] Starting disk [ 115.740495] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 115.740502] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [ 115.798218] ata1.00: configured for UDMA/100 [ 115.822002] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 115.822069] sd 0:0:0:0: [sda] Write Protect is off [ 115.822074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 115.822159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 115.932117] usb 1-2: reset full speed USB device using uhci_hcd and address 3 [ 116.248160] usb 3-2: reset full speed USB device using uhci_hcd and address 2 [ 116.412170] PM: resume devices took 2.488 seconds [ 116.412480] PM: Finishing wakeup. [ 116.412484] Restarting tasks ... done. [ 116.631708] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 116.631739] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 116.631764] r8169 0000:04:00.0: setting latency timer to 64 [ 116.636131] eth0: RTL8168b/8111b at 0xf8856000, 00:16:d4:0f:ce:aa, XID 38000000 IRQ 219 [ 116.775133] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 116.775142] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 116.775206] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 116.775229] iwl3945 0000:02:00.0: setting latency timer to 64 [ 116.775252] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 116.839479] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 116.841422] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 118.160666] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9 [ 118.180741] ACPI: Power Button (FF) [PWRF] [ 118.181273] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10 [ 118.189321] ACPI: Lid Switch [LID0] [ 118.189767] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input11 [ 118.245203] ACPI: Power Button (CM) [PWRB] [ 118.478804] ACPI: AC Adapter [ACAD] (on-line) [ 118.547660] ACPI: Battery Slot [BAT1] (battery absent) [ 120.649401] r8169: eth0: link up [ 120.649422] r8169: eth0: link up [ 121.059398] type=1503 audit(1225991609.143:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6662/net/" pid=6662 profile="/usr/sbin/cupsd" [ 121.685198] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 121.685647] firmware: requesting iwlwifi-3945-1.ucode [ 121.734783] Registered led device: iwl-phy0:radio [ 121.734829] Registered led device: iwl-phy0:assoc [ 121.734907] Registered led device: iwl-phy0:RX [ 121.734940] Registered led device: iwl-phy0:TX [ 121.766502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 122.118150] type=1503 audit(1225991610.203:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6735/net/" pid=6735 profile="/usr/sbin/cupsd" [ 122.118205] type=1503 audit(1225991610.203:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=6735 profile="/usr/sbin/cupsd" [ 122.118219] type=1503 audit(1225991610.203:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=6735 profile="/usr/sbin/cupsd" [ 122.118238] type=1503 audit(1225991610.203:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=6735 profile="/usr/sbin/cupsd" [ 122.118252] type=1503 audit(1225991610.203:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=6735 profile="/usr/sbin/cupsd" [ 122.118266] type=1503 audit(1225991610.203:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=6735 profile="/usr/sbin/cupsd" [ 122.118280] type=1503 audit(1225991610.203:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=6735 profile="/usr/sbin/cupsd" [ 122.118302] type=1503 audit(1225991610.203:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=6735 profile="/usr/sbin/cupsd" [ 122.118316] type=1503 audit(1225991610.203:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=6735 profile="/usr/sbin/cupsd" [ 131.364126] eth0: no IPv6 routers present