[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Oct 30 04:18:38 UTC 2008 (Ubuntu 2.6.27-7.15-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable) [ 0.000000] BIOS-e820: 00000000bffd0000 - 00000000bffe5000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffe5000 - 00000000bffe6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe6000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000cbf80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] last_pfn = 0xbffd0 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 37831000 - 37fefe69 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F8250, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BFFDC0A6, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP BFFE4992, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT BFFDC112, 880C (r1 NVIDIA MCP67 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS BFFE5FC0, 0040 [ 0.000000] ACPI: TCPA BFFE4A86, 0032 (r1 Phoeni x 6040000 TL 0) [ 0.000000] ACPI: SRAT BFFE4AB8, 00C8 (r1 AMD HAMMER 6040000 AMD 1) [ 0.000000] ACPI: SSDT BFFE4B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG BFFE4D86, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET BFFE4DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC BFFE4DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT BFFE4E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC BFFE4E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] 2175MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20] [ 0.000000] #4 [0037831000 - 0037fefe69] RAMDISK ==> [0037831000 - 0037fefe69] [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000] [ 0.000000] #6 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f8220] 000f8220 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x000bffd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bffd0 [ 0.000000] On node 0 totalpages: 786286 [ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000 [ 0.000000] DMA zone: 3962 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 552112 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779374 [ 0.000000] Kernel command line: root=UUID=0071675b-de2f-45b1-b155-6145e2678e71 ro [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2000.126 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 3102872k/3145536k available (2572k kernel code, 41432k reserved, 1160k data, 424k init, 2228032k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) [ 0.004000] .data : 0xc03832aa - 0xc04a5680 (1160 kB) [ 0.004000] .text : 0xc0100000 - 0xc03832aa (2572 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.25 BogoMIPS (lpj=8000504) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 0(2) -> Core 0 [ 0.004000] using C1E aware idle routine [ 0.004000] Checking 'hlt' instruction... OK. [ 0.017589] ACPI: Core revision 20080609 [ 0.020393] ACPI: Checking initramfs for custom DSDT [ 0.360309] ENABLING IO-APIC IRQs [ 0.360597] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.403849] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.404025] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4000.38 BogoMIPS (lpj=8000771) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1(2) -> Core 1 [ 0.488231] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.488712] Brought up 2 CPUs [ 0.488054] System has AMD C1E enabled [ 0.488070] Switch to broadcast mode on CPU1 [ 0.488892] Total of 2 processors activated (8000.63 BogoMIPS). [ 0.488990] CPU0 attaching sched-domain: [ 0.488993] domain 0: span 0-1 level CPU [ 0.488996] groups: 0 1 [ 0.489002] CPU1 attaching sched-domain: [ 0.489004] domain 0: span 0-1 level CPU [ 0.489006] groups: 1 0 [ 0.489075] Switch to broadcast mode on CPU0 [ 0.489075] net_namespace: 840 bytes [ 0.489075] Booting paravirtualized kernel on bare hardware [ 0.489075] Time: 11:00:54 Date: 11/01/08 [ 0.489075] NET: Registered protocol family 16 [ 0.489075] EISA bus registered [ 0.489075] ACPI: bus type pci registered [ 0.489075] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4 [ 0.489075] PCI: MCFG area at e0000000 reserved in E820 [ 0.489075] PCI: Using MMCONFIG for extended config space [ 0.489075] PCI: Using configuration type 1 for base access [ 0.489075] ACPI: EC: Look up EC in DSDT [ 0.494971] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.495911] ACPI: Interpreter enabled [ 0.495972] ACPI: (supports S0 S3 S4 S5) [ 0.496234] ACPI: Using IOAPIC for interrupt routing [ 0.496357] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.520189] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.520189] ACPI: EC: driver started in interrupt mode [ 0.520289] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.520289] PCI: 0000:00:01.1 reg 10 io port: [3080, 30bf] [ 0.520289] PCI: 0000:00:01.1 reg 20 io port: [3040, 307f] [ 0.520289] PCI: 0000:00:01.1 reg 24 io port: [3000, 303f] [ 0.520289] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.520297] pci 0000:00:01.1: PME# disabled [ 0.520403] PCI: 0000:00:01.3 reg 10 32bit mmio: [f6200000, f627ffff] [ 0.520477] PCI: 0000:00:02.0 reg 10 32bit mmio: [f6486000, f6486fff] [ 0.520499] pci 0000:00:02.0: supports D1 [ 0.520501] pci 0000:00:02.0: supports D2 [ 0.520503] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.520568] pci 0000:00:02.0: PME# disabled [ 0.520645] PCI: 0000:00:02.1 reg 10 32bit mmio: [f6489000, f64890ff] [ 0.520670] pci 0000:00:02.1: supports D1 [ 0.520671] pci 0000:00:02.1: supports D2 [ 0.520674] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.520739] pci 0000:00:02.1: PME# disabled [ 0.520818] PCI: 0000:00:04.0 reg 10 32bit mmio: [f6487000, f6487fff] [ 0.520839] pci 0000:00:04.0: supports D1 [ 0.520841] pci 0000:00:04.0: supports D2 [ 0.520843] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.520908] pci 0000:00:04.0: PME# disabled [ 0.520986] PCI: 0000:00:04.1 reg 10 32bit mmio: [f6489400, f64894ff] [ 0.521010] pci 0000:00:04.1: supports D1 [ 0.521012] pci 0000:00:04.1: supports D2 [ 0.521014] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.521079] pci 0000:00:04.1: PME# disabled [ 0.521169] PCI: 0000:00:06.0 reg 20 io port: [30c0, 30cf] [ 0.521203] PCI: 0000:00:07.0 reg 10 32bit mmio: [f6480000, f6483fff] [ 0.521228] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.521291] pci 0000:00:07.0: PME# disabled [ 0.521398] PCI: 0000:00:09.0 reg 10 io port: [30f0, 30f7] [ 0.521402] PCI: 0000:00:09.0 reg 14 io port: [30e4, 30e7] [ 0.521406] PCI: 0000:00:09.0 reg 18 io port: [30e8, 30ef] [ 0.521410] PCI: 0000:00:09.0 reg 1c io port: [30e0, 30e3] [ 0.521414] PCI: 0000:00:09.0 reg 20 io port: [30d0, 30df] [ 0.521418] PCI: 0000:00:09.0 reg 24 32bit mmio: [f6484000, f6485fff] [ 0.521455] PCI: 0000:00:0a.0 reg 10 32bit mmio: [f6488000, f6488fff] [ 0.521460] PCI: 0000:00:0a.0 reg 14 io port: [30f8, 30ff] [ 0.521464] PCI: 0000:00:0a.0 reg 18 32bit mmio: [f6489c00, f6489cff] [ 0.521468] PCI: 0000:00:0a.0 reg 1c 32bit mmio: [f6489800, f648980f] [ 0.521485] pci 0000:00:0a.0: supports D1 [ 0.521487] pci 0000:00:0a.0: supports D2 [ 0.521489] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.521555] pci 0000:00:0a.0: PME# disabled [ 0.521640] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.521704] pci 0000:00:0c.0: PME# disabled [ 0.521786] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.521851] pci 0000:00:0d.0: PME# disabled [ 0.521925] PCI: 0000:00:12.0 reg 10 32bit mmio: [f5000000, f5ffffff] [ 0.521930] PCI: 0000:00:12.0 reg 14 32bit mmio: [d0000000, dfffffff] [ 0.521937] PCI: 0000:00:12.0 reg 1c 64bit mmio: [f4000000, f4ffffff] [ 0.521942] PCI: 0000:00:12.0 reg 30 32bit mmio: [0, 1ffff] [ 0.522037] PCI: 0000:02:05.0 reg 10 32bit mmio: [0, 7ff] [ 0.522067] pci 0000:02:05.0: supports D1 [ 0.522069] pci 0000:02:05.0: supports D2 [ 0.522071] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.522136] pci 0000:02:05.0: PME# disabled [ 0.522196] PCI: 0000:02:05.1 reg 10 32bit mmio: [f6100800, f61008ff] [ 0.522196] pci 0000:02:05.1: supports D1 [ 0.522196] pci 0000:02:05.1: supports D2 [ 0.522196] pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.522196] pci 0000:02:05.1: PME# disabled [ 0.522731] PCI: 0000:02:05.2 reg 10 32bit mmio: [f6100c00, f6100cff] [ 0.522761] pci 0000:02:05.2: supports D1 [ 0.522762] pci 0000:02:05.2: supports D2 [ 0.522765] pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.522829] pci 0000:02:05.2: PME# disabled [ 0.522908] PCI: 0000:02:05.3 reg 10 32bit mmio: [f6101000, f61010ff] [ 0.522938] pci 0000:02:05.3: supports D1 [ 0.522939] pci 0000:02:05.3: supports D2 [ 0.522941] pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.523006] pci 0000:02:05.3: PME# disabled [ 0.523087] PCI: 0000:02:05.4 reg 10 32bit mmio: [f6101400, f61014ff] [ 0.523117] pci 0000:02:05.4: supports D1 [ 0.523119] pci 0000:02:05.4: supports D2 [ 0.523121] pci 0000:02:05.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.523186] pci 0000:02:05.4: PME# disabled [ 0.523272] pci 0000:00:08.0: transparent bridge [ 0.523335] PCI: bridge 0000:00:08.0 32bit mmio: [f6100000, f61fffff] [ 0.523372] PCI: bridge 0000:00:0c.0 io port: [4000, 4fff] [ 0.523375] PCI: bridge 0000:00:0c.0 32bit mmio: [f2000000, f3ffffff] [ 0.523379] PCI: bridge 0000:00:0c.0 64bit mmio pref: [f0000000, f1ffffff] [ 0.523413] PCI: 0000:03:00.0 reg 10 64bit mmio: [f6000000, f600ffff] [ 0.523481] PCI: bridge 0000:00:0d.0 32bit mmio: [f6000000, f60fffff] [ 0.523490] bus 00 -> node 0 [ 0.523497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.523605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.523631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.523671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.568299] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 0.568806] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.569307] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 0.569854] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.570400] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.570946] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.571493] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.571778] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 0.571778] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.571778] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 0.571778] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.571778] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 0.571778] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 0.571778] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 0.571778] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 0.572352] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 0.572854] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 0.573360] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 0.573866] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 0.576155] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.576238] pnp: PnP ACPI init [ 0.576238] ACPI: bus type pnp registered [ 0.581272] pnp: PnP ACPI: found 12 devices [ 0.581272] ACPI: ACPI bus type pnp unregistered [ 0.581272] PnPBIOS: Disabled by ACPI PNP [ 0.581272] PCI: Using ACPI for IRQ routing [ 0.584044] NET: Registered protocol family 8 [ 0.584105] NET: Registered protocol family 20 [ 0.588040] NetLabel: Initializing [ 0.588096] NetLabel: domain hash size = 128 [ 0.588156] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.588229] NetLabel: unlabeled traffic allowed by default [ 0.588297] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.588537] hpet0: 3 32-bit timers, 25000000 Hz [ 0.590163] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.590226] actual entries 65620 [ 0.590410] AppArmor: AppArmor Filesystem Enabled [ 0.590497] ACPI: RTC can wake from S4 [ 0.592050] Switched to high resolution mode on CPU 0 [ 0.592062] Switched to high resolution mode on CPU 1 [ 0.592091] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.592169] system 00:03: ioport range 0x1000-0x107f has been reserved [ 0.592234] system 00:03: ioport range 0x1080-0x10ff has been reserved [ 0.592298] system 00:03: ioport range 0x1400-0x147f has been reserved [ 0.592362] system 00:03: ioport range 0x1480-0x14ff has been reserved [ 0.592426] system 00:03: ioport range 0x1800-0x187f has been reserved [ 0.592490] system 00:03: ioport range 0x1880-0x18ff has been reserved [ 0.592557] system 00:04: ioport range 0x360-0x361 has been reserved [ 0.592622] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.592693] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.592767] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.592842] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.592917] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.592982] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 0.628347] pci 0000:00:08.0: PCI bridge, secondary bus 0000:02 [ 0.628410] pci 0000:00:08.0: IO window: disabled [ 0.628474] pci 0000:00:08.0: MEM window: 0xf6100000-0xf61fffff [ 0.628537] pci 0000:00:08.0: PREFETCH window: disabled [ 0.628601] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.628664] pci 0000:00:0c.0: IO window: 0x4000-0x4fff [ 0.628727] pci 0000:00:0c.0: MEM window: 0xf2000000-0xf3ffffff [ 0.628791] pci 0000:00:0c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.628867] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 [ 0.628929] pci 0000:00:0d.0: IO window: disabled [ 0.628991] pci 0000:00:0d.0: MEM window: 0xf6000000-0xf60fffff [ 0.629068] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.629137] pci 0000:00:08.0: setting latency timer to 64 [ 0.629143] pci 0000:00:0c.0: setting latency timer to 64 [ 0.629148] pci 0000:00:0d.0: setting latency timer to 64 [ 0.629151] bus: 00 index 0 io port: [0, ffff] [ 0.629212] bus: 00 index 1 mmio: [0, ffffffff] [ 0.629272] bus: 02 index 0 mmio: [0, 0] [ 0.629332] bus: 02 index 1 mmio: [f6100000, f61fffff] [ 0.629394] bus: 02 index 2 mmio: [0, 0] [ 0.629454] bus: 02 index 3 io port: [0, ffff] [ 0.629514] bus: 02 index 4 mmio: [0, ffffffff] [ 0.629575] bus: 04 index 0 io port: [4000, 4fff] [ 0.629636] bus: 04 index 1 mmio: [f2000000, f3ffffff] [ 0.629697] bus: 04 index 2 mmio: [f0000000, f1ffffff] [ 0.629758] bus: 04 index 3 mmio: [0, 0] [ 0.629818] bus: 03 index 0 mmio: [0, 0] [ 0.629878] bus: 03 index 1 mmio: [f6000000, f60fffff] [ 0.629939] bus: 03 index 2 mmio: [0, 0] [ 0.629998] bus: 03 index 3 mmio: [0, 0] [ 0.630068] NET: Registered protocol family 2 [ 0.641074] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.641415] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.642086] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.642464] TCP: Hash tables configured (established 131072 bind 65536) [ 0.642529] TCP reno registered [ 0.645110] NET: Registered protocol family 1 [ 0.645288] checking if image is initramfs... it is [ 1.337044] Freeing initrd memory: 7931k freed [ 1.337256] Simple Boot Flag at 0x36 set to 0x1 [ 1.338530] audit: initializing netlink socket (disabled) [ 1.338604] type=2000 audit(1225537254.336:1): initialized [ 1.344741] highmem bounce pool size: 64 pages [ 1.344807] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.347789] VFS: Disk quotas dquot_6.5.1 [ 1.347951] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.348138] msgmni has been set to 1725 [ 1.348327] io scheduler noop registered [ 1.348388] io scheduler anticipatory registered [ 1.348449] io scheduler deadline registered [ 1.348519] io scheduler cfq registered (default) [ 1.348610] pci 0000:00:00.0: Enabling HT MSI Mapping [ 1.348828] pci 0000:00:07.0: Enabling HT MSI Mapping [ 1.348903] pci 0000:00:08.0: Enabling HT MSI Mapping [ 1.348978] pci 0000:00:09.0: Enabling HT MSI Mapping [ 1.349067] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 1.349142] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 1.349217] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 1.349291] pci 0000:00:12.0: Boot video device [ 1.349428] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.349456] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.349538] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.349597] pci_express 0000:00:0c.0:pcie03: allocate port service [ 1.349685] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 1.349710] pcieport-driver 0000:00:0d.0: found MSI capability [ 1.349790] pci_express 0000:00:0d.0:pcie00: allocate port service [ 1.349845] pci_express 0000:00:0d.0:pcie03: allocate port service [ 1.350250] isapnp: Scanning for PnP cards... [ 1.702903] isapnp: No Plug & Play device found [ 1.745845] hpet_resources: 0xfed00000 is busy [ 1.745938] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.748492] brd: module loaded [ 1.748637] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.748860] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.776572] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.776646] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.777175] mice: PS/2 mouse device common for all mice [ 1.777401] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.777498] rtc0: alarms up to one year, y3k, hpet irqs [ 1.777695] EISA: Probing bus 0 at eisa.0 [ 1.777761] Cannot allocate resource for EISA slot 1 [ 1.777825] Cannot allocate resource for EISA slot 3 [ 1.777889] Cannot allocate resource for EISA slot 4 [ 1.777963] EISA: Detected 0 cards. [ 1.778025] cpuidle: using governor ladder [ 1.778085] cpuidle: using governor menu [ 1.778645] TCP cubic registered [ 1.778727] Using IPI No-Shortcut mode [ 1.779018] registered taskstats version 1 [ 1.779210] Magic number: 0:232:23 [ 1.779430] rtc_cmos 00:07: setting system clock to 2008-11-01 11:00:56 UTC (1225537256) [ 1.779505] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.779568] EDD information not available. [ 1.779900] Freeing unused kernel memory: 424k freed [ 1.780030] Write protecting the kernel text: 2576k [ 1.780130] Write protecting the kernel read-only data: 936k [ 1.804464] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.886179] fuse init (API version 7.9) [ 1.909257] ACPI: processor limited to max C-state 1 [ 1.909489] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.909797] processor ACPI0007:00: registered as cooling_device0 [ 1.909868] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.910217] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.910532] processor ACPI0007:01: registered as cooling_device1 [ 1.910601] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.913446] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20080609] [ 2.331157] usbcore: registered new interface driver usbfs [ 2.331243] usbcore: registered new interface driver hub [ 2.331362] usbcore: registered new device driver usb [ 2.331602] No dock devices found. [ 2.364390] SCSI subsystem initialized [ 2.412477] libata version 3.00 loaded. [ 2.412698] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 2.415671] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 2.415744] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 2.415821] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 2.418523] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 77.794989] Clocksource tsc unstable (delta = 4398046398936 ns) [ 77.809081] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:92:20:70 [ 77.809162] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 77.809831] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 77.809902] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 77.809988] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 77.809992] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 77.810094] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 77.810192] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 77.867452] usb usb1: configuration #1 chosen from 1 choice [ 77.867549] hub 1-0:1.0: USB hub found [ 77.867617] hub 1-0:1.0: 7 ports detected [ 78.074500] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 78.074574] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 78.074661] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 78.074665] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 78.074749] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 78.074848] ehci_hcd 0000:00:02.1: debug port 1 [ 78.074911] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 78.074927] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 78.084112] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 78.084309] usb usb2: configuration #1 chosen from 1 choice [ 78.084397] hub 2-0:1.0: USB hub found [ 78.084464] hub 2-0:1.0: 7 ports detected [ 78.293415] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 78.293484] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18 [ 78.293568] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 78.293572] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 78.293659] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 [ 78.293746] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 78.350633] usb usb3: configuration #1 chosen from 1 choice [ 78.350725] hub 3-0:1.0: USB hub found [ 78.350792] hub 3-0:1.0: 2 ports detected [ 78.556680] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 78.556748] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22 [ 78.556833] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 78.556837] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 78.556922] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 78.557019] ehci_hcd 0000:00:04.1: debug port 1 [ 78.557083] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 78.557090] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 [ 78.568290] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 78.568466] usb usb4: configuration #1 chosen from 1 choice [ 78.568553] hub 4-0:1.0: USB hub found [ 78.568619] hub 4-0:1.0: 2 ports detected [ 78.696589] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 78.779580] ohci1394 0000:02:05.0: enabling device (0100 -> 0102) [ 78.780083] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 78.780156] ohci1394 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 78.831951] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 78.839291] ahci 0000:00:09.0: version 3.0 [ 78.839721] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 78.839794] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 78.839952] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 78.840030] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part [ 78.840096] ahci 0000:00:09.0: setting latency timer to 64 [ 78.840521] scsi0 : ahci [ 78.840910] scsi1 : ahci [ 78.841057] scsi2 : ahci [ 78.841175] scsi3 : ahci [ 78.841331] ata1: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 221 [ 78.841406] ata2: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 221 [ 78.841480] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 221 [ 78.841555] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 221 [ 78.953900] usb 2-1: configuration #1 chosen from 1 choice [ 79.324407] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 79.324850] ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 8909, max UDMA/100 [ 79.324915] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 79.325473] ata1.00: configured for UDMA/100 [ 79.644310] ata2: SATA link down (SStatus 0 SControl 300) [ 79.725386] usb 4-2: new high speed USB device using ehci_hcd and address 3 [ 79.961243] usb 4-2: configuration #1 chosen from 1 choice [ 79.963954] usbcore: registered new interface driver libusual [ 79.969560] ata3: SATA link down (SStatus 0 SControl 300) [ 79.970825] Initializing USB Mass Storage driver... [ 80.109372] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0026d61101] [ 80.264200] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 80.288198] ata4: SATA link down (SStatus 0 SControl 300) [ 80.288370] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2320B 8909 PQ: 0 ANSI: 5 [ 80.288688] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 80.292492] pata_amd 0000:00:06.0: version 0.3.10 [ 80.292538] pata_amd 0000:00:06.0: setting latency timer to 64 [ 80.292606] scsi4 : pata_amd [ 80.292757] scsi5 : pata_amd [ 80.293228] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 80.293293] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 80.299814] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 80.317130] Driver 'sd' needs updating - please use bus_type methods [ 80.317903] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 80.317987] sd 0:0:0:0: [sda] Write Protect is off [ 80.318049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 80.318082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 80.318228] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 80.318308] sd 0:0:0:0: [sda] Write Protect is off [ 80.318370] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 80.318401] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 80.318479] sda:<6>ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 80.473489] ata5: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) [ 80.480777] usb 1-2: configuration #1 chosen from 1 choice [ 80.504445] ata5.00: configured for MWDMA2 [ 80.504560] ata6: port disabled. ignoring. [ 80.506646] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5 [ 80.506881] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 80.522442] Driver 'sr' needs updating - please use bus_type methods [ 80.647870] sda1 sda2 sda3 sda4 [ 80.705930] sd 0:0:0:0: [sda] Attached SCSI disk [ 80.719173] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 80.719253] Uniform CD-ROM driver Revision: 3.20 [ 80.719412] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 80.785141] usb 1-4: new low speed USB device using ohci_hcd and address 3 [ 80.996742] PM: Starting manual resume from disk [ 80.996806] PM: Resume from partition 8:4 [ 80.996808] PM: Checking hibernation image. [ 80.996958] PM: Resume from disk failed. [ 81.003049] usb 1-4: configuration #1 chosen from 1 choice [ 81.044709] kjournald starting. Commit interval 5 seconds [ 81.044792] EXT3-fs: mounted filesystem with ordered data mode. [ 81.313095] usb 1-7: new full speed USB device using ohci_hcd and address 4 [ 81.522496] usb 1-7: configuration #1 chosen from 1 choice [ 81.828346] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 82.058668] usb 3-1: configuration #1 chosen from 1 choice [ 82.062188] scsi6 : SCSI emulation for USB Mass Storage devices [ 82.062353] usb-storage: device found at 2 [ 82.062355] usb-storage: waiting for device to settle before scanning [ 82.062551] scsi7 : SCSI emulation for USB Mass Storage devices [ 82.062715] usb-storage: device found at 2 [ 82.062717] usb-storage: waiting for device to settle before scanning [ 82.062850] usbcore: registered new interface driver usb-storage [ 82.062875] usbcore: registered new interface driver hiddev [ 82.062978] USB Mass Storage support registered. [ 82.070647] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input2 [ 82.073221] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:02.0-4 [ 82.073497] usbcore: registered new interface driver usbhid [ 82.073561] usbhid: v2.6:USB HID core driver [ 87.061442] usb-storage: device scan complete [ 87.068384] scsi 7:0:0:0: Direct-Access CMOTECH Mass Storage 2.31 PQ: 0 ANSI: 6 [ 87.071446] usb-storage: device scan complete [ 87.073295] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 87.079379] sd 7:0:0:0: [sdb] 135169 512-byte hardware sectors (69 MB) [ 87.086370] sd 7:0:0:0: [sdb] Write Protect is off [ 87.086433] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 87.086435] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 87.105372] sd 7:0:0:0: [sdb] 135169 512-byte hardware sectors (69 MB) [ 87.112371] sd 7:0:0:0: [sdb] Write Protect is off [ 87.112433] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 87.112435] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 87.112499] sdb: [ 87.126432] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 87.126599] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 87.134406] sd 6:0:0:0: [sdc] 2002944 512-byte hardware sectors (1026 MB) [ 87.136163] sd 6:0:0:0: [sdc] Write Protect is off [ 87.136225] sd 6:0:0:0: [sdc] Mode Sense: 0b 00 00 08 [ 87.136228] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 87.143663] sd 6:0:0:0: [sdc] 2002944 512-byte hardware sectors (1026 MB) [ 87.145151] sd 6:0:0:0: [sdc] Write Protect is off [ 87.145213] sd 6:0:0:0: [sdc] Mode Sense: 0b 00 00 08 [ 87.145216] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 87.147778] sdc: sdc1 [ 87.148956] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 87.149083] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 87.796146] udevd version 124 started [ 88.293993] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 88.313033] ACPI: Power Button (FF) [PWRF] [ 88.313220] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 88.329022] ACPI: Sleep Button (CM) [SLPB] [ 88.329201] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 88.329731] ACPI: Lid Switch [LID] [ 88.329925] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 [ 88.361022] ACPI: Power Button (CM) [PWRB] [ 88.404761] ACPI: AC Adapter [ACAD] (on-line) [ 88.749491] ACPI: Battery Slot [BAT0] (battery present) [ 88.749819] ACPI: WMI: Mapper loaded [ 89.107286] acpi device:25: registered as cooling_device2 [ 89.107586] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input7 [ 89.125046] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 89.363049] Linux video capture interface: v2.00 [ 89.425748] uvcvideo: Found UVC 1.00 device HP Webcam (0c45:62c0) [ 89.431327] input: HP Webcam as /devices/pci0000:00/0000:00:04.1/usb4/4-2/4-2:1.0/input/input8 [ 89.431447] usbcore: registered new interface driver uvcvideo [ 89.431510] USB Video Class driver (v0.1.0) [ 89.497381] Bluetooth: Core ver 2.13 [ 89.521636] NET: Registered protocol family 31 [ 89.521702] Bluetooth: HCI device and connection manager initialized [ 89.521766] Bluetooth: HCI socket layer initialized [ 89.573313] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 89.573463] usbcore: registered new interface driver btusb [ 89.959493] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 90.031789] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 90.061421] ricoh-mmc: Ricoh MMC Controller disabling driver [ 90.061491] ricoh-mmc: Copyright(c) Philip Langdale [ 90.069246] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) [ 90.069338] ricoh-mmc: Controller is now disabled. [ 90.085970] sdhci: Secure Digital Host Controller Interface driver [ 90.086036] sdhci: Copyright(c) Pierre Ossman [ 90.098319] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22) [ 90.098813] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 90.098885] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 90.102058] mmc0: SDHCI controller on PCI [0000:02:05.1] using PIO [ 90.111356] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 90.116944] Linux agpgart interface v0.103 [ 90.175067] ath_hal: module license 'Proprietary' taints kernel. [ 90.178490] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 90.212150] wlan: 0.9.4 [ 90.218435] ath_pci: 0.9.4 [ 90.219978] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 90.220055] ath_pci 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 90.220136] ath_pci 0000:03:00.0: setting latency timer to 64 [ 90.248017] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13) [ 90.248366] ath_pci 0000:03:00.0: PCI INT A disabled [ 90.686195] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 90.686273] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16 [ 90.686352] nvidia 0000:00:12.0: setting latency timer to 64 [ 90.686626] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 [ 90.897556] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 90.897633] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 90.897735] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 91.617728] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000 [ 91.701821] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 92.753707] lp: driver loaded but no devices found [ 92.927908] Adding 1951888k swap on /dev/sda4. Priority:-1 extents:1 across:1951888k [ 93.385206] EXT3 FS on sda3, internal journal [ 93.896733] type=1505 audit(1225553548.275:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4456 [ 94.093517] type=1505 audit(1225553548.471:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4461 [ 94.093738] type=1505 audit(1225553548.471:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4461 [ 94.139957] type=1505 audit(1225553548.515:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4465 [ 94.241979] ip_tables: (C) 2000-2006 Netfilter Core Team [ 95.210987] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 95.211608] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x11 [ 95.211612] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12 [ 95.211615] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13 [ 95.211617] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 96.017683] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 98.128302] apm: BIOS not found. [ 98.306147] ppdev: user-space parallel port driver [ 102.481098] Bluetooth: L2CAP ver 2.11 [ 102.481114] Bluetooth: L2CAP socket layer initialized [ 102.497281] Bluetooth: RFCOMM socket layer initialized [ 102.498767] Bluetooth: RFCOMM TTY layer initialized [ 102.498780] Bluetooth: RFCOMM ver 1.10 [ 102.530109] Bluetooth: SCO (Voice Link) ver 0.6 [ 102.530132] Bluetooth: SCO socket layer initialized [ 102.551710] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 102.551731] Bluetooth: BNEP filters: protocol multicast [ 102.597443] Bridge firewalling registered [ 102.597845] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 105.626040] NET: Registered protocol family 10 [ 105.629014] lo: Disabled Privacy Extensions [ 106.712944] eth0: no link during initialization. [ 106.714182] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 146.233574] CPU0 attaching NULL sched-domain. [ 146.233611] CPU1 attaching NULL sched-domain. [ 146.240143] CPU0 attaching sched-domain: [ 146.240157] domain 0: span 0-1 level CPU [ 146.240165] groups: 0 1 [ 146.240179] CPU1 attaching sched-domain: [ 146.240185] domain 0: span 0-1 level CPU [ 146.240191] groups: 1 0 [ 202.298019] program itfchg is using a deprecated SCSI ioctl, please convert it to SG_IO [ 202.408040] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 202.728039] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 203.048041] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 203.377038] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 203.709074] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 204.033067] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 216.029886] type=1503 audit(1225553670.407:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6435/net/" pid=6435 profile="/usr/sbin/cupsd" [ 216.029972] type=1503 audit(1225553670.407:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=6435 profile="/usr/sbin/cupsd" [ 216.029990] type=1503 audit(1225553670.407:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=6435 profile="/usr/sbin/cupsd" [ 216.030020] type=1503 audit(1225553670.407:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=6435 profile="/usr/sbin/cupsd" [ 216.030038] type=1503 audit(1225553670.407:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=6435 profile="/usr/sbin/cupsd" [ 216.030055] type=1503 audit(1225553670.407:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=6435 profile="/usr/sbin/cupsd" [ 216.030074] type=1503 audit(1225553670.407:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=6435 profile="/usr/sbin/cupsd" [ 216.030107] type=1503 audit(1225553670.407:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=6435 profile="/usr/sbin/cupsd" [ 216.030124] type=1503 audit(1225553670.407:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=6435 profile="/usr/sbin/cupsd" [ 216.030214] type=1503 audit(1225553670.407:15): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=7 name="/proc/6435/net/dev" pid=6435 profile="/usr/sbin/cupsd" [ 232.246237] program itfchg is using a deprecated SCSI ioctl, please convert it to SG_IO [ 232.749426] usb 1-2: USB disconnect, address 2 [ 232.752724] VFS: busy inodes on changed media. [ 232.752747] scsi 7:0:0:0: rejecting I/O to dead device [ 232.752772] scsi 7:0:0:0: rejecting I/O to dead device [ 232.752787] scsi 7:0:0:0: rejecting I/O to dead device [ 232.752801] scsi 7:0:0:0: rejecting I/O to dead device [ 232.752810] scsi 7:0:0:0: [sdb] READ CAPACITY failed [ 232.752816] scsi 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK [ 232.752828] scsi 7:0:0:0: [sdb] Sense not available. [ 232.752841] scsi 7:0:0:0: rejecting I/O to dead device [ 232.752852] scsi 7:0:0:0: [sdb] Write Protect is off [ 232.752858] scsi 7:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 232.752865] scsi 7:0:0:0: [sdb] Assuming drive cache: write through [ 232.827357] scsi 7:0:0:0: rejecting I/O to dead device [ 234.296056] usb 1-2: new full speed USB device using ohci_hcd and address 5 [ 234.499380] usb 1-2: config 1 has an invalid interface number: 4 but max is 3 [ 234.499399] usb 1-2: config 1 has no interface number 3 [ 234.509584] usb 1-2: configuration #1 chosen from 1 choice [ 234.537698] scsi8 : SCSI emulation for USB Mass Storage devices [ 234.558336] usb-storage: device found at 5 [ 234.558352] usb-storage: waiting for device to settle before scanning [ 234.860689] cdc_acm 1-2:1.0: ttyACM0: USB ACM device [ 234.865801] usbcore: registered new interface driver cdc_acm [ 234.865820] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 239.557558] usb-storage: device scan complete [ 239.564448] scsi 8:0:0:0: Direct-Access CMOTECH Mass Storage 2.31 PQ: 0 ANSI: 6 [ 239.576392] sd 8:0:0:0: [sdb] 135169 512-byte hardware sectors (69 MB) [ 239.583382] sd 8:0:0:0: [sdb] Write Protect is off [ 239.583390] sd 8:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 239.583398] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 239.602422] sd 8:0:0:0: [sdb] 135169 512-byte hardware sectors (69 MB) [ 239.609975] sd 8:0:0:0: [sdb] Write Protect is off [ 239.609986] sd 8:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 239.609992] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 239.610009] sdb: [ 239.628268] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 239.629337] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 242.216554] PPP generic driver version 2.4.2