2.6.27-7.14-generic problems booting
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Incomplete
|
Undecided
|
Unassigned |
Bug Description
Binary package hint: linux-image-
No way to boot with kernel 2.6.27 any version i tried had same effect , error on ATA and fall to shell :
ALERT! /dev/disk/
, short log :
[ 5.627683] ata3: hard resetting link
[ 6.100104] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.124560] ata3.00: configured for UDMA/100
[ 6.124646] ata3: EH complete
[ 6.124824] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 6.125085] ata3: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1
[ 6.125162] ata3: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0
[ 6.125164] dhfis 0x0 dmafis 0x0 sdbfis 0x0
[ 6.125307] ata3: ATA_REG 0x51 ERR_REG 0x4
[ 6.125379] ata3: tag : dhfis dmafis sdbfis sacitve
[ 6.125451] ata3: tag 0x0: 0 0 0 1
[ 6.125533] ata3.00: NCQ disabled due to excessive errors
[ 6.125607] ata3.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 6.125682] ata3.00: Ata error. fis:0x41
[ 6.125758] ata3.00: cmd 60/08:00:
[ 6.125759] res 51/04:08:
[ 6.125928] ata3.00: status: { DRDY ERR }
[ 6.125999] ata3.00: error: { ABRT }
Attached initramfs debug , dmesg and /proc/modules.
Let me know if it's a known issue or do you need some more test , boot with some parameters , etc ...
Thanks !
- Angel
Hi Angel,
I've seen slightly similar bugs of being dropped to a busybox, bug 288790 and bug 288388 . However, they both comment that if they exit the busybox shell they are able to continue booting successfully. I'm not sure this is the case for you based on the errors you posted though. The error messages you've posted indicate an actual hw issue. Are you able to successfully boot a different kernel, say a 2.6.24 kernel from Hardy?