[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002ff70000 (usable) [ 0.000000] BIOS-e820: 000000002ff70000 - 000000002ff7e000 (ACPI data) [ 0.000000] BIOS-e820: 000000002ff7e000 - 000000002ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 767MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 196464) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 196464 [ 0.000000] HighMem 196464 -> 196464 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 196464 [ 0.000000] On node 0 totalpages: 196464 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1502 pages used for memmap [ 0.000000] Normal zone: 190866 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7010 checksum 0 [ 0.000000] ACPI: RSDP 000F7010, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 2FF731CD, 004C (r1 IBM TP-1I 2090 LTP 0) [ 0.000000] ACPI: FACP 2FF73300, 0081 (r1 IBM TP-1I 2090 IBM 1) [ 0.000000] ACPI: DSDT 2FF733E7, AAD5 (r1 IBM TP-1I 2090 MSFT 100000D) [ 0.000000] ACPI: FACS 2FF7F000, 0040 [ 0.000000] ACPI: SSDT 2FF733B4, 0033 (r1 IBM TP-1I 2090 MSFT 100000D) [ 0.000000] ACPI: ECDT 2FF7DEBC, 0052 (r1 IBM TP-1I 2090 IBM 1) [ 0.000000] ACPI: TCPA 2FF7DF0E, 0032 (r1 IBM TP-1I 2090 PTL 1) [ 0.000000] ACPI: BOOT 2FF7DFD8, 0028 (r1 IBM TP-1I 2090 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cf800000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194930 [ 0.000000] Kernel command line: root=UUID=ef6328c0-1984-43ec-986c-8e0b9c1440c4 ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0160e000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1794.259 MHz processor. [ 4.416468] Console: colour VGA+ 80x25 [ 4.416475] console [tty0] enabled [ 4.417420] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 4.418343] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 4.442741] Memory: 766500k/785856k available (2157k kernel code, 18760k reserved, 998k data, 364k init, 0k highmem) [ 4.442753] virtual kernel memory layout: [ 4.442754] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 4.442756] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 4.442758] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB) [ 4.442759] lowmem : 0xc0000000 - 0xeff70000 ( 767 MB) [ 4.442761] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 4.442762] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 4.442764] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 4.442769] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 4.442824] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 4.522751] Calibrating delay using timer specific routine.. 3592.58 BogoMIPS (lpj=7185170) [ 4.522787] Security Framework initialized [ 4.522797] SELinux: Disabled at boot. [ 4.522818] AppArmor: AppArmor initialized [ 4.522824] Failure registering capabilities with primary security module. [ 4.522837] Mount-cache hash table entries: 512 [ 4.523029] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000 00000000 [ 4.523049] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 4.523053] CPU: L2 cache: 512K [ 4.523057] CPU: Hyper-Threading is disabled [ 4.523060] CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000 [ 4.523077] Compat vDSO mapped to ffffe000. [ 4.523097] Checking 'hlt' instruction... OK. [ 4.539258] SMP alternatives: switching to UP code [ 4.541512] Freeing SMP alternatives: 11k freed [ 4.541712] Early unpacking initramfs... done [ 5.029462] ACPI: Core revision 20070126 [ 5.029584] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 5.035412] ACPI: setting ELCR to 0200 (from 0800) [ 5.047893] CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07 [ 5.047904] SMP motherboard not detected. [ 5.047908] Local APIC not detected. Using dummy APIC emulation. [ 5.047979] Brought up 1 CPUs [ 5.048004] CPU0 attaching sched-domain: [ 5.048009] domain 0: span 01 [ 5.048012] groups: 01 [ 5.048312] net_namespace: 64 bytes [ 5.048324] Booting paravirtualized kernel on bare hardware [ 5.049201] Time: 17:58:00 Date: 10/13/08 [ 5.049244] NET: Registered protocol family 16 [ 5.049587] EISA bus registered [ 5.049604] ACPI: bus type pci registered [ 5.049838] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8 [ 5.049842] PCI: Using configuration type 1 [ 5.049844] Setting up standard PCI resources [ 5.053648] ACPI: EC: EC description table is found, configuring boot EC [ 5.059325] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 5.063267] ACPI: Interpreter enabled [ 5.063272] ACPI: (supports S0 S3 S4 S5) [ 5.063296] ACPI: Using PIC for interrupt routing [ 5.072916] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 5.072921] ACPI: EC: driver started in poll mode [ 5.073131] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 5.073631] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 5.073637] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 5.074447] PCI: Transparent bridge - 0000:00:1e.0 [ 5.074619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 5.074695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 5.074728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 5.079620] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 5.079874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 5.080124] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 5.080369] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 5.080616] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 5.080842] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 5.081068] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 5.081295] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 5.081515] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 5.081618] ACPI: Power Resource [PUBS] (on) [ 5.081712] Linux Plug and Play Support v0.97 (c) Adam Belay [ 5.081767] pnp: PnP ACPI init [ 5.081782] ACPI: bus type pnp registered [ 5.083177] pnpacpi: exceeded the max number of mem resources: 12 [ 5.086797] pnp: PnP ACPI: found 13 devices [ 5.086801] ACPI: ACPI bus type pnp unregistered [ 5.086807] PnPBIOS: Disabled by ACPI PNP [ 5.087202] PCI: Using ACPI for IRQ routing [ 5.087209] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 5.110042] NET: Registered protocol family 8 [ 5.110046] NET: Registered protocol family 20 [ 5.110159] AppArmor: AppArmor Filesystem Enabled [ 5.114021] Time: tsc clocksource has been installed. [ 5.122081] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 5.122087] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 5.122091] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 5.122095] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 5.122099] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 5.122103] system 00:00: iomem range 0x0-0x0 could not be reserved [ 5.122106] system 00:00: iomem range 0x0-0x0 could not be reserved [ 5.122110] system 00:00: iomem range 0x0-0x0 could not be reserved [ 5.122114] system 00:00: iomem range 0xdc000-0xdffff has been reserved [ 5.122118] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 5.122122] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 5.122126] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 5.122138] system 00:02: ioport range 0x1000-0x107f has been reserved [ 5.122142] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 5.122146] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 5.122150] system 00:02: ioport range 0x1600-0x167f has been reserved [ 5.152822] PCI: Bridge: 0000:00:01.0 [ 5.152828] IO window: 3000-3fff [ 5.152834] MEM window: d0100000-d01fffff [ 5.152840] PREFETCH window: e8000000-efffffff [ 5.152852] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 5.152856] IO window: 00004000-000040ff [ 5.152862] IO window: 00004400-000044ff [ 5.152868] PREFETCH window: f0000000-f3ffffff [ 5.152874] MEM window: d4000000-d7ffffff [ 5.152880] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 5.152883] IO window: 00004800-000048ff [ 5.152889] IO window: 00004c00-00004cff [ 5.152895] PREFETCH window: f4000000-f7ffffff [ 5.152902] MEM window: d8000000-dbffffff [ 5.152907] PCI: Bridge: 0000:00:1e.0 [ 5.152912] IO window: 4000-8fff [ 5.152919] MEM window: d0200000-dfffffff [ 5.152925] PREFETCH window: f0000000-f80fffff [ 5.152948] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 5.153443] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 5.153448] PCI: setting IRQ 11 as level-triggered [ 5.153453] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 5.153880] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 5.153884] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 5.153908] NET: Registered protocol family 2 [ 5.190063] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 5.190601] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 5.192048] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 5.192970] TCP: Hash tables configured (established 131072 bind 65536) [ 5.192976] TCP reno registered [ 5.202217] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 5.654970] it is [ 6.160969] Freeing initrd memory: 7705k freed [ 6.161242] Simple Boot Flag at 0x35 set to 0x1 [ 6.161759] audit: initializing netlink socket (disabled) [ 6.161784] audit(1223920680.716:1): initialized [ 6.165088] VFS: Disk quotas dquot_6.5.1 [ 6.165211] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 6.165447] io scheduler noop registered [ 6.165450] io scheduler anticipatory registered [ 6.165453] io scheduler deadline registered [ 6.165473] io scheduler cfq registered (default) [ 6.165547] Boot video device is 0000:01:00.0 [ 6.165562] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 6.166006] isapnp: Scanning for PnP cards... [ 6.519280] isapnp: No Plug & Play device found [ 6.568201] Real Time Clock Driver v1.12ac [ 6.568366] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 6.568515] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 6.568701] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 6.569771] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 6.570057] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 6.570075] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 6.571131] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 6.571242] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 6.571428] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 6.578070] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.578078] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.588220] mice: PS/2 mouse device common for all mice [ 6.588416] EISA: Probing bus 0 at eisa.0 [ 6.588426] Cannot allocate resource for EISA slot 1 [ 6.588430] Cannot allocate resource for EISA slot 2 [ 6.588433] Cannot allocate resource for EISA slot 3 [ 6.588436] Cannot allocate resource for EISA slot 4 [ 6.588439] Cannot allocate resource for EISA slot 5 [ 6.588442] Cannot allocate resource for EISA slot 6 [ 6.588445] Cannot allocate resource for EISA slot 7 [ 6.588448] Cannot allocate resource for EISA slot 8 [ 6.588450] EISA: Detected 0 cards. [ 6.588455] cpuidle: using governor ladder [ 6.588458] cpuidle: using governor menu [ 6.588603] NET: Registered protocol family 1 [ 6.588663] Using IPI No-Shortcut mode [ 6.588719] registered taskstats version 1 [ 6.588861] Magic number: 12:247:997 [ 6.588884] hash matches device ttyad [ 6.589018] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.589021] EDD information not available. [ 6.589592] Freeing unused kernel memory: 364k freed [ 6.592822] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 8.022333] fuse init (API version 7.9) [ 8.257990] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 8.258004] ACPI: Processor [CPU] (supports 8 throttling states) [ 8.267131] ACPI: Thermal Zone [THM0] (52 C) [ 9.672215] usbcore: registered new interface driver usbfs [ 9.672255] usbcore: registered new interface driver hub [ 9.684207] usbcore: registered new device driver usb [ 9.711254] USB Universal Host Controller Interface driver v3.0 [ 9.711350] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 9.711368] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 9.711375] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 9.711817] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 9.711854] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 9.712115] usb usb1: configuration #1 chosen from 1 choice [ 9.712153] hub 1-0:1.0: USB hub found [ 9.712163] hub 1-0:1.0: 2 ports detected [ 9.816585] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 9.816593] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 9.816610] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 9.816616] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 9.816654] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 9.816685] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 9.816866] usb usb2: configuration #1 chosen from 1 choice [ 9.816912] hub 2-0:1.0: USB hub found [ 9.816920] hub 2-0:1.0: 2 ports detected [ 9.848257] SCSI subsystem initialized [ 9.920453] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 9.920460] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 9.920479] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 9.920485] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 9.920526] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 9.920558] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 9.920735] usb usb3: configuration #1 chosen from 1 choice [ 9.920773] hub 3-0:1.0: USB hub found [ 9.920782] hub 3-0:1.0: 2 ports detected [ 9.954089] libata version 3.00 loaded. [ 9.975745] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 9.975751] e100: Copyright(c) 1999-2006 Intel Corporation [ 10.024529] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 10.024537] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 10.050745] e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:09:6b:30:8a:e1 [ 10.056482] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 10.056500] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 10.056568] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 10.056591] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 10.067463] ata_piix 0000:00:1f.1: version 2.12 [ 10.067498] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 10.067567] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 10.083607] scsi0 : ata_piix [ 10.091576] scsi1 : ata_piix [ 10.092827] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 10.092831] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 10.235519] Floppy drive(s): fd0 is 1.44M [ 10.254416] FDC 0 is a National Semiconductor PC87306 [ 10.255831] ata1.00: ATA-5: TOSHIBA MK4019GAX, FA003B, max UDMA/100 [ 10.255836] ata1.00: 78140160 sectors, multi 16: LBA [ 10.263754] ata1.00: configured for UDMA/100 [ 10.583307] ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.N0, max UDMA/33 [ 10.755039] ata2.00: configured for UDMA/33 [ 10.755231] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4019GA FA00 PQ: 0 ANSI: 5 [ 10.756490] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 1.N0 PQ: 0 ANSI: 5 [ 11.821858] Driver 'sd' needs updating - please use bus_type methods [ 11.822723] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 11.822747] sd 0:0:0:0: [sda] Write Protect is off [ 11.822751] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.822784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.822869] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 11.822888] sd 0:0:0:0: [sda] Write Protect is off [ 11.822892] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.822922] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.822928] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 11.893555] sda1 sda2 < sda5 > [ 11.919385] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.928822] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.928856] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 11.931586] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 11.931597] Uniform CD-ROM driver Revision: 3.20 [ 11.931690] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 12.235549] Attempting manual resume [ 12.235556] swsusp: Resume From Partition 8:5 [ 12.235560] PM: Checking swsusp image. [ 12.236150] PM: Resume from disk failed. [ 12.297173] kjournald starting. Commit interval 5 seconds [ 12.297198] EXT3-fs: mounted filesystem with ordered data mode. [ 20.629858] Clocksource tsc unstable (delta = -369820066 ns) [ 20.633840] Time: acpi_pm clocksource has been installed. [ 21.628632] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.704652] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.785250] Linux agpgart interface v0.102 [ 21.832991] agpgart: Detected an Intel 845G Chipset. [ 21.838212] agpgart: AGP aperture is 64M @ 0xe0000000 [ 21.904380] iTCO_vendor_support: vendor-support=0 [ 21.936174] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 21.936389] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060) [ 21.936461] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.275690] intel_rng: FWH not detected [ 22.497925] input: Power Button (FF) as /devices/virtual/input/input2 [ 22.507368] ACPI: Power Button (FF) [PWRF] [ 22.507549] input: Lid Switch as /devices/virtual/input/input3 [ 22.507812] ACPI: Lid Switch [LID] [ 22.507919] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 22.523349] ACPI: Sleep Button (CM) [SLPB] [ 24.061455] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512] [ 24.061482] Yenta: Using INTVAL to route CSC interrupts to PCI [ 24.061485] Yenta: Routing CardBus interrupts to PCI [ 24.061492] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 [ 24.126943] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 24.197774] ieee80211_crypt: registered algorithm 'NULL' [ 24.293560] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 24.293566] Socket status: 30000006 [ 24.293573] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 24.293578] cs: IO port probe 0x4000-0x8fff: clean. [ 24.295123] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff [ 24.295127] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf80fffff [ 24.381117] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512] [ 24.381141] Yenta: Using INTVAL to route CSC interrupts to PCI [ 24.381144] Yenta: Routing CardBus interrupts to PCI [ 24.381151] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64 [ 24.613129] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 24.613137] Socket status: 30000006 [ 24.613143] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 24.613148] cs: IO port probe 0x4000-0x8fff: clean. [ 24.614692] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff [ 24.614696] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf80fffff [ 24.668767] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 24.669222] hostap_pci: Registered netdevice wifi0 [ 24.669235] wifi0: Original COR value: 0x0 [ 24.872163] prism2_hw_init: initialized in 200 ms [ 24.884966] wifi0: NIC: id=0x8013 v1.0.0 [ 24.892155] wifi0: PRI: id=0x15 v1.1.1 [ 24.896147] wifi0: STA: id=0x1f v1.7.4 [ 24.968055] wifi0: Intersil Prism2.5 PCI: mem=0xf8000000, irq=11 [ 24.968614] wifi0: registered netdevice wlan0 [ 25.128008] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 25.128043] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 25.543279] intel8x0_measure_ac97_clock: measured 55040 usecs [ 25.543288] intel8x0: clocking to 48000 [ 25.792686] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/LNXVIDEO:00/input/input6 [ 25.802942] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 26.492668] irda_init() [ 26.492698] NET: Registered protocol family 23 [ 26.761960] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 26.775548] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7 [ 26.804524] parport_pc 00:0b: reported by Plug and Play ACPI [ 26.804576] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 26.834418] ACPI: AC Adapter [AC] (on-line) [ 26.883829] ACPI: Battery Slot [BAT0] (battery present) [ 26.902051] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 26.902217] nsc-ircc, chip->init [ 26.902228] nsc-ircc, Found chip at base=0x02e [ 26.902256] nsc-ircc, driver loaded (Dag Brattli) [ 26.902266] nsc_ircc_open(), can't get iobase of 0x2f8 [ 26.902297] nsc-ircc, Found chip at base=0x02e [ 26.902324] nsc-ircc, driver loaded (Dag Brattli) [ 26.902327] nsc_ircc_open(), can't get iobase of 0x2f8 [ 26.902974] nsc-ircc 00:0c: disabled [ 29.415525] cs: IO port probe 0x100-0x3af: clean. [ 29.416799] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 29.417359] cs: IO port probe 0x820-0x8ff: clean. [ 29.417835] cs: IO port probe 0xc00-0xcf7: clean. [ 29.418585] cs: IO port probe 0xa00-0xaff: clean. [ 29.423161] cs: IO port probe 0x100-0x3af: clean. [ 29.424432] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 29.424988] cs: IO port probe 0x820-0x8ff: clean. [ 29.425462] cs: IO port probe 0xc00-0xcf7: clean. [ 29.426213] cs: IO port probe 0xa00-0xaff: clean. [ 29.920694] lp0: using parport0 (interrupt-driven). [ 30.007977] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k [ 30.586443] EXT3 FS on sda1, internal journal [ 31.765061] ip_tables: (C) 2000-2006 Netfilter Core Team [ 32.323716] ACPI: ACPI Dock Station Driver [ 32.334678] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 32.334686] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 32.334761] ACPI: Error installing bay notify handler [ 32.334768] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 33.893061] IBM machine detected. Enabling interrupts during APM calls. [ 33.893070] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 33.893075] apm: overridden by ACPI. [ 34.071739] ppdev: user-space parallel port driver [ 34.227826] audit(1223920711.101:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5037 profile="/usr/sbin/cupsd" namespace="default" [ 34.402797] Non-volatile memory driver v1.2 [ 34.435873] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 34.435881] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 34.435884] thinkpad_acpi: ThinkPad BIOS 1IET70WW (2.09 ), EC 1IHT20WW-1.07 [ 34.442883] thinkpad_acpi: another device driver is already handling bay events [ 34.442892] thinkpad_acpi: disabling subdriver bay [ 34.448451] input: ThinkPad Extra Buttons as /devices/virtual/input/input8 [ 34.710864] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input9 [ 52.886852] Marking TSC unstable due to: cpufreq changes. [ 36.128073] ttyS1: LSR safety check engaged! [ 54.785462] Bluetooth: Core ver 2.11 [ 54.787340] NET: Registered protocol family 31 [ 54.787351] Bluetooth: HCI device and connection manager initialized [ 54.787359] Bluetooth: HCI socket layer initialized [ 54.829586] Bluetooth: L2CAP ver 2.9 [ 54.829596] Bluetooth: L2CAP socket layer initialized [ 36.587747] wifi0: LinkStatus=2 (Disconnected) [ 36.587994] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 36.601781] Bluetooth: RFCOMM socket layer initialized [ 36.602800] Bluetooth: RFCOMM TTY layer initialized [ 36.602806] Bluetooth: RFCOMM ver 1.8 [ 37.147668] wifi0: LinkStatus=1 (Connected) [ 37.147974] wifi0: LinkStatus: BSSID=00:13:46:f2:53:16 [ 38.630756] [drm] Initialized drm 1.1.0 20060810 [ 38.651020] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 38.652765] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 82.651542] NET: Registered protocol family 10 [ 82.653492] lo: Disabled Privacy Extensions [ 82.655808] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 63.806925] wlan0: no IPv6 routers present [ 88.211475] wifi0: LinkStatus=2 (Disconnected) [ 88.213728] wifi0: LinkStatus: BSSID=00:13:46:f2:53:16 [ 88.364862] wifi0: LinkStatus=1 (Connected) [ 88.365375] wifi0: LinkStatus: BSSID=00:13:46:f2:53:16 [ 88.369197] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 133.435214] NET: Registered protocol family 17 [ 133.439903] wifi0: LinkStatus=2 (Disconnected) [ 133.440159] wifi0: LinkStatus: BSSID=00:13:46:f2:53:16 [ 133.634892] wifi0: LinkStatus=2 (Disconnected) [ 133.638004] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 133.643041] wifi0: LinkStatus=2 (Disconnected) [ 133.646188] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 133.648250] wlan0: Trying to join BSSID 00:02:72:4d:7d:cb [ 133.650267] wifi0: LinkStatus=1 (Connected) [ 133.651792] wifi0: LinkStatus: BSSID=00:02:72:4d:7d:cb [ 133.670265] wifi0: LinkStatus=2 (Disconnected) [ 133.671658] wifi0: LinkStatus: BSSID=00:02:72:4d:7d:cb [ 133.826310] wifi0: LinkStatus=2 (Disconnected) [ 133.827734] wifi0: LinkStatus: BSSID=00:02:72:4d:7d:cb [ 133.834280] wifi0: LinkStatus=2 (Disconnected) [ 133.837388] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 133.839482] wlan0: Trying to join BSSID 00:02:72:4d:7d:cb [ 133.841437] wifi0: LinkStatus=1 (Connected) [ 133.842905] wifi0: LinkStatus: BSSID=00:02:72:4d:7d:cb [ 133.957964] ieee80211_crypt: registered algorithm 'TKIP' [ 94.021084] wlan0: no IPv6 routers present [ 145.792964] wlan0: no IPv6 routers present