[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 17:53:40 UTC 2008 (Ubuntu 2.6.24-19.41-generic) [ 0.000000] Command line: root=UUID=c295483d-a38b-4b75-8eda-ca60577e7526 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f790000 (usable) [ 0.000000] BIOS-e820: 000000007f790000 - 000000007f79e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f79e000 - 000000007f7e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 522128) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FAFB0 checksum 0 [ 0.000000] ACPI: RSDP 000FAFB0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7F790000, 0038 (r1 A_M_I_ OEMRSDT 6000705 MSFT 97) [ 0.000000] ACPI: FACP 7F790200, 0081 (r1 A_M_I_ OEMFACP 6000705 MSFT 97) [ 0.000000] ACPI: DSDT 7F790410, 5623 (r1 A0605 A0605000 0 INTL 20060113) [ 0.000000] ACPI: FACS 7F79E000, 0040 [ 0.000000] ACPI: APIC 7F790390, 0080 (r1 A_M_I_ OEMAPIC 6000705 MSFT 97) [ 0.000000] ACPI: OEMB 7F79E040, 0066 (r1 A_M_I_ AMI_OEM 6000705 MSFT 97) [ 0.000000] ACPI: HPET 7F795A40, 0038 (r1 A_M_I_ OEMHPET 6000705 MSFT 97) [ 0.000000] ACPI: MCFG 7F795A80, 003C (r1 A_M_I_ OEMMCFG 6000705 MSFT 97) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007f790000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 522128) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007f790000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 522128 [ 0.000000] On node 0 totalpages: 522031 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1220 pages reserved [ 0.000000] DMA zone: 2723 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7082 pages used for memmap [ 0.000000] DMA32 zone: 510950 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:80380000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513673 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=c295483d-a38b-4b75-8eda-ca60577e7526 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 26.604400] time.c: Detected 1799.943 MHz processor. [ 26.605484] Console: colour VGA+ 80x25 [ 26.605488] console [tty0] enabled [ 26.605507] Checking aperture... [ 26.605516] Calgary: detecting Calgary via BIOS EBDA area [ 26.605517] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 26.629446] Memory: 2046428k/2088512k available (2489k kernel code, 41696k reserved, 1318k data, 320k init) [ 26.629486] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 26.706226] Calibrating delay using timer specific routine.. 3602.66 BogoMIPS (lpj=7205333) [ 26.706262] Security Framework initialized [ 26.706270] SELinux: Disabled at boot. [ 26.706283] AppArmor: AppArmor initialized [ 26.706287] Failure registering capabilities with primary security module. [ 26.706507] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 26.707961] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 26.708691] Mount-cache hash table entries: 256 [ 26.708850] Initializing cgroup subsys ns [ 26.708857] Initializing cgroup subsys cpuacct [ 26.708876] CPU: L1 I cache: 32K, L1 D cache: 32K [ 26.708878] CPU: L2 cache: 1024K [ 26.708880] CPU 0/0 -> Node 0 [ 26.708882] using mwait in idle threads. [ 26.708884] CPU: Physical Processor ID: 0 [ 26.708885] CPU: Processor Core ID: 0 [ 26.708892] CPU0: Thermal monitoring enabled (TM2) [ 26.708909] SMP alternatives: switching to UP code [ 26.709765] Early unpacking initramfs... done [ 27.111218] ACPI: Core revision 20070126 [ 27.111262] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 27.153979] Using local APIC timer interrupts. [ 27.209452] APIC timer calibration result 12499609 [ 27.209454] Detected 12.499 MHz APIC timer. [ 27.209534] SMP alternatives: switching to SMP code [ 27.210250] Booting processor 1/2 APIC 0x1 [ 27.220406] Initializing CPU#1 [ 27.297318] Calibrating delay using timer specific routine.. 3599.91 BogoMIPS (lpj=7199827) [ 27.297324] CPU: L1 I cache: 32K, L1 D cache: 32K [ 27.297326] CPU: L2 cache: 1024K [ 27.297328] CPU 1/1 -> Node 0 [ 27.297330] CPU: Physical Processor ID: 0 [ 27.297331] CPU: Processor Core ID: 1 [ 27.297337] CPU1: Thermal monitoring enabled (TM2) [ 27.297561] Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d [ 27.297654] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 27.317652] Brought up 2 CPUs [ 27.317726] CPU0 attaching sched-domain: [ 27.317729] domain 0: span 03 [ 27.317730] groups: 01 02 [ 27.317733] domain 1: span 03 [ 27.317735] groups: 03 [ 27.317737] CPU1 attaching sched-domain: [ 27.317738] domain 0: span 03 [ 27.317740] groups: 02 01 [ 27.317742] domain 1: span 03 [ 27.317743] groups: 03 [ 27.317976] net_namespace: 120 bytes [ 27.318346] Time: 16:27:31 Date: 10/13/08 [ 27.318374] NET: Registered protocol family 16 [ 27.318572] ACPI: bus type pci registered [ 27.318646] PCI: Using configuration type 1 [ 27.321561] ACPI: EC: Look up EC in DSDT [ 27.326374] ACPI: Interpreter enabled [ 27.326377] ACPI: (supports S0 S1 S3 S4 S5) [ 27.326394] ACPI: Using IOAPIC for interrupt routing [ 27.333557] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.334122] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 27.334126] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 27.334687] PCI: Transparent bridge - 0000:00:1e.0 [ 27.334715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.334869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 27.334971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 27.335054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 27.337478] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 27.337594] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 27.337705] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 27.337817] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 27.337927] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 27.338038] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 27.338149] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 27.338261] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 27.338391] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 44, should be 3F [20070126] [ 27.338399] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.338433] pnp: PnP ACPI init [ 27.338440] ACPI: bus type pnp registered [ 27.342579] pnp: PnP ACPI: found 18 devices [ 27.342583] ACPI: ACPI bus type pnp unregistered [ 27.342834] PCI: Using ACPI for IRQ routing [ 27.342837] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.357332] NET: Registered protocol family 8 [ 27.357335] NET: Registered protocol family 20 [ 27.357386] PCI-GART: No AMD northbridge found. [ 27.357392] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 27.357397] hpet0: 3 64-bit timers, 14318180 Hz [ 27.358440] AppArmor: AppArmor Filesystem Enabled [ 27.361296] Time: tsc clocksource has been installed. [ 27.361311] Switched to high resolution mode on CPU 0 [ 27.361663] Switched to high resolution mode on CPU 1 [ 27.369323] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 27.369338] system 00:07: ioport range 0x290-0x297 has been reserved [ 27.369346] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 27.369351] system 00:08: ioport range 0x800-0x87f has been reserved [ 27.369355] system 00:08: ioport range 0x480-0x4bf has been reserved [ 27.369359] system 00:08: ioport range 0x900-0x91f has been reserved [ 27.369364] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 27.369368] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 27.369373] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved [ 27.369377] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 27.369389] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 27.369393] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved [ 27.369405] system 00:0f: iomem range 0xffc00000-0xfff7ffff could not be reserved [ 27.369413] system 00:10: iomem range 0xf0000000-0xf3ffffff has been reserved [ 27.369428] system 00:11: iomem range 0x0-0x9ffff could not be reserved [ 27.369431] system 00:11: iomem range 0xc0000-0xdffff has been reserved [ 27.369434] system 00:11: iomem range 0xe0000-0xfffff could not be reserved [ 27.369437] system 00:11: iomem range 0x100000-0x7f7fffff could not be reserved [ 27.369440] system 00:11: iomem range 0x0-0x0 could not be reserved [ 27.369853] PCI: Bridge: 0000:00:1c.0 [ 27.369856] IO window: e000-efff [ 27.369860] MEM window: disabled. [ 27.369863] PREFETCH window: disabled. [ 27.369867] PCI: Bridge: 0000:00:1c.1 [ 27.369869] IO window: d000-dfff [ 27.369873] MEM window: cff00000-cfffffff [ 27.369877] PREFETCH window: disabled. [ 27.369881] PCI: Bridge: 0000:00:1e.0 [ 27.369884] IO window: c000-cfff [ 27.369887] MEM window: disabled. [ 27.369891] PREFETCH window: eff00000-efffffff [ 27.369916] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.369922] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 27.369938] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 27.369943] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 27.369952] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 27.369962] NET: Registered protocol family 2 [ 27.405363] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 27.406081] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 27.408896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 27.409596] TCP: Hash tables configured (established 262144 bind 65536) [ 27.409599] TCP reno registered [ 27.421410] checking if image is initramfs... it is [ 28.211577] Freeing initrd memory: 7980k freed [ 28.216526] audit: initializing netlink socket (disabled) [ 28.216545] audit(1223915251.552:1): initialized [ 28.218574] VFS: Disk quotas dquot_6.5.1 [ 28.218649] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 28.218779] io scheduler noop registered [ 28.218781] io scheduler anticipatory registered [ 28.218783] io scheduler deadline registered [ 28.218887] io scheduler cfq registered (default) [ 28.218899] Boot video device is 0000:00:02.0 [ 28.219671] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 28.219710] assign_interrupt_mode Found MSI capability [ 28.219743] Allocate Port Service[0000:00:1c.0:pcie00] [ 28.219778] Allocate Port Service[0000:00:1c.0:pcie02] [ 28.219854] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 28.219892] assign_interrupt_mode Found MSI capability [ 28.219922] Allocate Port Service[0000:00:1c.1:pcie00] [ 28.247953] Real Time Clock Driver v1.12ac [ 28.248133] hpet_resources: 0xfed00000 is busy [ 28.248167] Linux agpgart interface v0.102 [ 28.248169] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.248297] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.248976] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.249688] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.249751] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 28.249852] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 28.252550] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.252554] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 28.267901] mice: PS/2 mouse device common for all mice [ 28.267961] cpuidle: using governor ladder [ 28.267963] cpuidle: using governor menu [ 28.268107] NET: Registered protocol family 1 [ 28.268213] registered taskstats version 1 [ 28.268312] Magic number: 12:623:489 [ 28.268419] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 28.268422] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 28.268423] EDD information not available. [ 28.268434] Freeing unused kernel memory: 320k freed [ 28.295127] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 29.471448] fuse init (API version 7.9) [ 29.488665] ACPI: SSDT 7F79E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) [ 29.488896] ACPI: Processor [CPU1] (supports 8 throttling states) [ 29.489076] ACPI: SSDT 7F79E280, 013A (r1 AMI CPU2PM 1 INTL 20060113) [ 29.490800] ACPI: Processor [CPU2] (supports 8 throttling states) [ 29.490819] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 29.490833] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 29.831848] usbcore: registered new interface driver usbfs [ 29.831871] usbcore: registered new interface driver hub [ 29.834309] SCSI subsystem initialized [ 29.839374] usbcore: registered new device driver usb [ 29.840465] USB Universal Host Controller Interface driver v3.0 [ 29.840528] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 29.840540] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 29.840544] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 29.840810] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 29.840842] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000 [ 29.840978] usb usb1: configuration #1 chosen from 1 choice [ 29.841001] hub 1-0:1.0: USB hub found [ 29.841007] hub 1-0:1.0: 2 ports detected [ 29.842202] libata version 3.00 loaded. [ 29.941130] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 29.941141] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 29.941145] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 29.941178] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 29.941205] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400 [ 29.941304] usb usb2: configuration #1 chosen from 1 choice [ 29.941326] hub 2-0:1.0: USB hub found [ 29.941331] hub 2-0:1.0: 2 ports detected [ 30.044965] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 30.044980] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 30.044984] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 30.045008] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 30.045038] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800 [ 30.045149] usb usb3: configuration #1 chosen from 1 choice [ 30.045175] hub 3-0:1.0: USB hub found [ 30.045180] hub 3-0:1.0: 2 ports detected [ 30.148795] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 30.148808] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 30.148812] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 30.148835] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 30.148868] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000 [ 30.148983] usb usb4: configuration #1 chosen from 1 choice [ 30.149007] hub 4-0:1.0: USB hub found [ 30.149013] hub 4-0:1.0: 2 ports detected [ 30.252794] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 30.253066] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 30.253072] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 30.253122] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 30.257016] ehci_hcd 0000:00:1d.7: debug port 1 [ 30.257023] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 30.257032] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfeffc00 [ 30.272478] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 30.272598] usb usb5: configuration #1 chosen from 1 choice [ 30.272622] hub 5-0:1.0: USB hub found [ 30.272629] hub 5-0:1.0: 8 ports detected [ 30.385077] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 30.385117] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 30.385129] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 30.385154] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23 [ 30.385172] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 30.385180] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 30.387948] ata_piix 0000:00:1f.1: version 2.12 [ 30.387964] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 30.387993] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 30.393085] scsi0 : ata_piix [ 30.393418] scsi1 : ata_piix [ 30.394709] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 30.394712] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 30.720223] ata1.00: ATA-5: ST340016A, 3.10, max UDMA/100 [ 30.720229] ata1.00: 78165360 sectors, multi 16: LBA [ 30.720251] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A302, max UDMA/66 [ 30.729052] ata1.00: configured for UDMA/100 [ 30.899714] ata1.01: configured for UDMA/66 [ 31.066148] scsi 0:0:0:0: Direct-Access ATA ST340016A 3.10 PQ: 0 ANSI: 5 [ 31.069906] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4160B A302 PQ: 0 ANSI: 5 [ 31.069988] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 31.070013] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23 [ 31.070054] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 31.070125] scsi2 : ata_piix [ 31.070168] scsi3 : ata_piix [ 31.070196] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 23 [ 31.070198] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 23 [ 31.231183] ata3.00: ATA-7: SAMSUNG HD250HJ, FH100-05, max UDMA7 [ 31.231188] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 31.239175] ata3.00: configured for UDMA/133 [ 31.405509] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5 [ 31.412884] Driver 'sd' needs updating - please use bus_type methods [ 31.412970] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 31.412981] sd 0:0:0:0: [sda] Write Protect is off [ 31.412984] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.412998] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.413040] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 31.413048] sd 0:0:0:0: [sda] Write Protect is off [ 31.413050] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.413064] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.413068] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 31.423978] sda1 [ 31.424062] sd 0:0:0:0: [sda] Attached SCSI disk [ 31.424149] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 31.424160] sd 2:0:0:0: [sdb] Write Protect is off [ 31.424163] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 31.424179] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.424217] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 31.424226] sd 2:0:0:0: [sdb] Write Protect is off [ 31.424228] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 31.424243] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.424246] sdb: sdb1 sdb2 sdb3 [ 31.442142] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 31.442146] Uniform CD-ROM driver Revision: 3.20 [ 31.442212] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 31.450971] sd 2:0:0:0: [sdb] Attached SCSI disk [ 31.455362] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 31.455385] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 31.455405] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 31.630549] Attempting manual resume [ 31.630552] swsusp: Resume From Partition 8:19 [ 31.630554] PM: Checking swsusp image. [ 31.630717] PM: Resume from disk failed. [ 31.664016] kjournald starting. Commit interval 5 seconds [ 31.664039] EXT3-fs: mounted filesystem with ordered data mode. [ 39.209160] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 39.255504] intel_rng: FWH not detected [ 39.309244] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 39.344244] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 39.472415] agpgart: Detected an Intel 945G Chipset. [ 39.472912] agpgart: Detected 7932K stolen memory. [ 39.487116] agpgart: AGP aperture is 256M @ 0xd0000000 [ 39.565287] parport_pc 00:06: reported by Plug and Play ACPI [ 39.565400] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 39.769032] input: Power Button (FF) as /devices/virtual/input/input3 [ 39.831779] iTCO_vendor_support: vendor-support=0 [ 39.864655] ACPI: Power Button (FF) [PWRF] [ 39.864741] input: Power Button (CM) as /devices/virtual/input/input4 [ 39.870330] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 39.870420] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 39.870449] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 39.928544] ACPI: Power Button (CM) [PWRB] [ 39.986541] Linux video capture interface: v2.00 [ 40.095993] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 40.096005] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 40.096284] atl1 0000:02:00.0: version 2.0.7 [ 40.233850] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input5 [ 40.401813] bttv: driver version 0.9.17 loaded [ 40.401817] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 40.401873] bttv: Bt8xx card found (0). [ 40.401894] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 40.401911] bttv0: Bt878 (rev 17) at 0000:01:00.0, irq: 17, latency: 64, mmio: 0xefffe000 [ 40.402425] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 [ 40.402429] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] [ 40.402454] bttv0: gpio: en=00000000, out=00000000 in=00ff67ff [init] [ 40.402828] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 40.403453] bttv0: miro: id=25 tuner=1 radio=no stereo=no [ 40.403456] bttv0: tuner type=1 [ 40.403458] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 40.404118] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 40.404734] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 40.465746] All bytes are equal. It is not a TEA5767 [ 40.465750] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw]) [ 40.465772] tuner-simple 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 40.465774] tuner 0-0060: type set to Philips PAL_I (FI12 [ 40.465777] tuner-simple 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 40.465779] tuner 0-0060: type set to Philips PAL_I (FI12 [ 40.476663] bttv0: registered device video0 [ 40.476683] bttv0: registered device vbi0 [ 40.476716] bttv0: PLL: 28636363 => 35468950 .. ok [ 40.614360] bt878: AUDIO driver version 0.0.0 loaded [ 40.614399] bt878: Bt878 AUDIO function found (0). [ 40.614420] ACPI: PCI Interrupt 0000:01:00.1[A] -> GSI 17 (level, low) -> IRQ 17 [ 40.614427] bt878_probe: card id=[0x1211bd], Unknown card. [ 40.614428] Exiting.. [ 40.614433] ACPI: PCI interrupt for device 0000:01:00.1 disabled [ 40.614439] bt878: probe of 0000:01:00.1 failed with error -22 [ 41.314409] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 41.314703] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 42.879903] NET: Registered protocol family 10 [ 42.880136] lo: Disabled Privacy Extensions [ 42.880451] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 43.370772] lp0: using parport0 (interrupt-driven). [ 43.435490] w83627ehf: Found W83627EHG chip at 0x290 [ 43.454042] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! [ 43.454088] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! [ 43.554133] Adding 1132572k swap on /dev/sdb3. Priority:-1 extents:1 across:1132572k [ 44.106123] EXT3 FS on sdb1, internal journal [ 44.206789] device-mapper: uevent: version 1.0.3 [ 44.206827] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 45.012936] kjournald starting. Commit interval 5 seconds [ 45.013138] EXT3 FS on sdb2, internal journal [ 45.013143] EXT3-fs: mounted filesystem with ordered data mode. [ 45.030782] kjournald starting. Commit interval 5 seconds [ 45.030800] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 45.036292] EXT3 FS on sda1, internal journal [ 45.036296] EXT3-fs: mounted filesystem with ordered data mode. [ 45.442877] ip_tables: (C) 2000-2006 Netfilter Core Team [ 47.112556] No dock devices found. [ 49.734110] ppdev: user-space parallel port driver [ 50.058349] audit(1223915273.788:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5340 profile="/usr/sbin/cupsd" namespace="default" [ 50.908270] [drm] Initialized drm 1.1.0 20060810 [ 50.912932] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.912940] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 50.913006] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 56.230170] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 59.839750] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 59.839755] vboxdrv: Successfully done. [ 59.839757] vboxdrv: Found 2 processor cores. [ 59.839771] vboxdrv: fAsync=0 u64DiffCores=1368. [ 59.839863] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 59.839866] vboxdrv: Successfully loaded version 1.6.6 (interface 0x00080000). [ 61.426206] Bluetooth: Core ver 2.11 [ 61.426318] NET: Registered protocol family 31 [ 61.426321] Bluetooth: HCI device and connection manager initialized [ 61.426326] Bluetooth: HCI socket layer initialized [ 61.445050] Bluetooth: L2CAP ver 2.9 [ 61.445054] Bluetooth: L2CAP socket layer initialized [ 61.518730] Bluetooth: RFCOMM socket layer initialized [ 61.518747] Bluetooth: RFCOMM TTY layer initialized [ 61.518749] Bluetooth: RFCOMM ver 1.8 [ 64.055218] Netfilter messages via NETLINK v0.30. [ 162.697474] usb 5-2: new high speed USB device using ehci_hcd and address 2 [ 163.372353] usb 5-2: new high speed USB device using ehci_hcd and address 5 [ 163.505064] usb 5-2: configuration #1 chosen from 1 choice [ 163.572149] ieee80211_crypt: registered algorithm 'NULL' [ 163.584198] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 163.584203] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 163.707825] usb 5-2: reset high speed USB device using ehci_hcd and address 5 [ 163.841123] zd1211rw 5-2:1.0: eth1 [ 163.841148] usbcore: registered new interface driver zd1211rw [ 163.989794] zd1211rw 5-2:1.0: firmware version 4605 [ 164.029733] zd1211rw 5-2:1.0: zd1211 chip 0ace:1211 v4330 high 00-0e-2e AL2230_RF pa0 ----- [ 164.053863] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 164.143874] NET: Registered protocol family 17 [ 164.844090] SoftMAC: Open Authentication completed with 00:0d:88:e4:5a:7c [ 164.897976] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 164.942941] ieee80211_crypt: registered algorithm 'TKIP' [ 175.152859] eth1: no IPv6 routers present [ 185.182913] SoftMAC: wx_set_mlme: we should know the net here... [ 190.497720] usb 5-2: USB disconnect, address 5 [ 195.451304] usb 5-4: new high speed USB device using ehci_hcd and address 6 [ 195.584034] usb 5-4: configuration #1 chosen from 1 choice [ 195.698898] usb 5-4: reset high speed USB device using ehci_hcd and address 6 [ 195.832400] zd1211rw 5-4:1.0: eth1 [ 195.935969] zd1211rw 5-4:1.0: firmware version 4605 [ 195.975910] zd1211rw 5-4:1.0: zd1211 chip 0ace:1211 v4330 high 00-0e-2e AL2230_RF pa0 ----- [ 196.000171] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 196.744705] SoftMAC: Open Authentication completed with 00:0d:88:e4:5a:7c [ 196.811460] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 207.199858] eth1: no IPv6 routers present