Jan  1 12:38:23 localhost kernel: Inspecting /boot/System.map-2.6.15-10-386
Jan  1 12:38:23 localhost kernel: Loaded 22833 symbols from /boot/System.map-2.6.15-10-386.
Jan  1 12:38:23 localhost kernel: Symbols match kernel version 2.6.15.
Jan  1 12:38:23 localhost kernel: No module symbols loaded - kernel modules not enabled. 
Jan  1 12:38:23 localhost kernel: PU save and restore... done.
Jan  1 12:38:23 localhost kernel: [4294669.519000] Enabling unmasked SIMD FPU exception support... done.
Jan  1 12:38:23 localhost kernel: [4294669.519000] Checking 'hlt' instruction... OK.
Jan  1 12:38:23 localhost kernel: [4294669.523000] SMP alternatives: switching to UP code
Jan  1 12:38:23 localhost kernel: [4294669.523000] checking if image is initramfs... it is
Jan  1 12:38:23 localhost kernel: [4294670.087000] Freeing initrd memory: 5943k freed
Jan  1 12:38:23 localhost kernel: [4294670.100000]  not found!
Jan  1 12:38:23 localhost kernel: [4294670.108000] ACPI: setting ELCR to 0200 (from 0e20)
Jan  1 12:38:23 localhost kernel: [4294670.117000] NET: Registered protocol family 16
Jan  1 12:38:23 localhost kernel: [4294670.117000] EISA bus registered
Jan  1 12:38:23 localhost kernel: [4294670.117000] ACPI: bus type pci registered
Jan  1 12:38:23 localhost kernel: [4294670.118000] PCI: PCI BIOS revision 2.10 entry at 0xfd88e, last bus=1
Jan  1 12:38:23 localhost kernel: [4294670.118000] PCI: Using configuration type 1
Jan  1 12:38:23 localhost kernel: [4294670.119000] ACPI: Subsystem revision 20050916
Jan  1 12:38:23 localhost kernel: [4294670.152000] ACPI: Interpreter enabled
Jan  1 12:38:23 localhost kernel: [4294670.152000] ACPI: Using PIC for interrupt routing
Jan  1 12:38:23 localhost kernel: [4294670.153000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan  1 12:38:23 localhost kernel: [4294670.153000] PCI: Probing PCI hardware (bus 00)
Jan  1 12:38:23 localhost kernel: [4294670.167000] PCI quirk: region 8000-803f claimed by ali7101 ACPI
Jan  1 12:38:23 localhost kernel: [4294670.167000] PCI quirk: region 8040-805f claimed by ali7101 SMB
Jan  1 12:38:23 localhost kernel: [4294670.167000] Boot video device is 0000:01:00.0
Jan  1 12:38:23 localhost kernel: [4294670.167000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan  1 12:38:23 localhost kernel: [4294670.169000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *9
Jan  1 12:38:23 localhost kernel: [4294670.170000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
Jan  1 12:38:23 localhost kernel: [4294670.170000] ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
Jan  1 12:38:23 localhost kernel: [4294670.170000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan  1 12:38:23 localhost kernel: [4294670.171000] ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
Jan  1 12:38:23 localhost kernel: [4294670.171000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan  1 12:38:23 localhost kernel: [4294670.171000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 7) *0, disabled.
Jan  1 12:38:23 localhost kernel: [4294670.171000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan  1 12:38:23 localhost kernel: [4294670.172000] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan  1 12:38:23 localhost kernel: [4294670.190000] ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
Jan  1 12:38:23 localhost kernel: [4294670.191000] Linux Plug and Play Support v0.97 (c) Adam Belay
Jan  1 12:38:23 localhost kernel: [4294670.191000] pnp: PnP ACPI init
Jan  1 12:38:23 localhost kernel: [4294670.218000] pnp: PnP ACPI: found 9 devices
Jan  1 12:38:23 localhost kernel: [4294670.218000] PnPBIOS: Disabled by ACPI PNP
Jan  1 12:38:23 localhost kernel: [4294670.218000] PCI: Using ACPI for IRQ routing
Jan  1 12:38:23 localhost kernel: [4294670.218000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jan  1 12:38:23 localhost kernel: [4294670.221000] PCI: Bridge: 0000:00:01.0
Jan  1 12:38:23 localhost kernel: [4294670.221000]   IO window: disabled.
Jan  1 12:38:23 localhost kernel: [4294670.221000]   MEM window: e9000000-e9ffffff
Jan  1 12:38:23 localhost kernel: [4294670.221000]   PREFETCH window: ea000000-efffffff
Jan  1 12:38:23 localhost kernel: [4294670.221000] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
Jan  1 12:38:23 localhost kernel: [4294670.221000]   IO window: 00002000-000020ff
Jan  1 12:38:23 localhost kernel: [4294670.221000]   IO window: 00002400-000024ff
Jan  1 12:38:23 localhost kernel: [4294670.221000]   PREFETCH window: 50000000-51ffffff
Jan  1 12:38:23 localhost kernel: [4294670.221000]   MEM window: 52000000-53ffffff
Jan  1 12:38:23 localhost kernel: [4294670.221000] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan  1 12:38:23 localhost kernel: [4294670.221000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
Jan  1 12:38:23 localhost kernel: [4294670.221000] PCI: setting IRQ 10 as level-triggered
Jan  1 12:38:23 localhost kernel: [4294670.221000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
Jan  1 12:38:23 localhost kernel: [4294670.221000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
Jan  1 12:38:23 localhost kernel: [4294670.222000] audit: initializing netlink socket (disabled)
Jan  1 12:38:23 localhost kernel: [4294670.222000] audit(1136140661.221:1): initialized
Jan  1 12:38:23 localhost kernel: [4294670.222000] highmem bounce pool size: 64 pages
Jan  1 12:38:23 localhost kernel: [4294670.222000] VFS: Disk quotas dquot_6.5.1
Jan  1 12:38:23 localhost kernel: [4294670.222000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan  1 12:38:23 localhost kernel: [4294670.222000] Initializing Cryptographic API
Jan  1 12:38:23 localhost kernel: [4294670.222000] io scheduler noop registered
Jan  1 12:38:23 localhost kernel: [4294670.222000] io scheduler anticipatory registered
Jan  1 12:38:23 localhost kernel: [4294670.222000] io scheduler deadline registered
Jan  1 12:38:23 localhost kernel: [4294670.222000] io scheduler cfq registered
Jan  1 12:38:23 localhost kernel: [4294670.222000] Activating ISA DMA hang workarounds.
Jan  1 12:38:23 localhost kernel: [4294670.222000] isapnp: Scanning for PnP cards...
Jan  1 12:38:23 localhost kernel: [4294670.579000] isapnp: No Plug & Play device found
Jan  1 12:38:23 localhost kernel: [4294670.597000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Jan  1 12:38:23 localhost kernel: [4294670.599000] serio: i8042 AUX port at 0x60,0x64 irq 12
Jan  1 12:38:23 localhost kernel: [4294670.599000] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan  1 12:38:23 localhost kernel: [4294670.599000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jan  1 12:38:23 localhost kernel: [4294670.600000] PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
Jan  1 12:38:23 localhost kernel: [4294670.600000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
Jan  1 12:38:23 localhost kernel: [4294670.600000] PCI: setting IRQ 3 as level-triggered
Jan  1 12:38:23 localhost kernel: [4294670.600000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3
Jan  1 12:38:23 localhost kernel: [4294670.601000] 0000:00:08.0: ttyS0 at I/O 0x1428 (irq = 3) is a 8250
Jan  1 12:38:23 localhost kernel: [4294670.601000] 0000:00:08.0: ttyS1 at I/O 0x1440 (irq = 3) is a 8250
Jan  1 12:38:23 localhost kernel: [4294670.601000] 0000:00:08.0: ttyS2 at I/O 0x1450 (irq = 3) is a 8250
Jan  1 12:38:23 localhost kernel: [4294670.602000] 0000:00:08.0: ttyS3 at I/O 0x1460 (irq = 3) is a 8250
Jan  1 12:38:23 localhost kernel: [4294670.602000] Couldn't register serial port 0000:00:08.0: -28
Jan  1 12:38:23 localhost kernel: [4294670.602000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jan  1 12:38:23 localhost kernel: [4294670.602000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan  1 12:38:23 localhost kernel: [4294670.602000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan  1 12:38:23 localhost kernel: [4294670.602000] ACPI: bus type ide registered
Jan  1 12:38:23 localhost kernel: [4294670.602000] mice: PS/2 mouse device common for all mice
Jan  1 12:38:23 localhost kernel: [4294670.603000] EISA: Probing bus 0 at eisa.0
Jan  1 12:38:23 localhost kernel: [4294670.603000] Cannot allocate resource for EISA slot 1
Jan  1 12:38:23 localhost kernel: [4294670.603000] Cannot allocate resource for EISA slot 2
Jan  1 12:38:23 localhost kernel: [4294670.603000] Cannot allocate resource for EISA slot 3
Jan  1 12:38:23 localhost kernel: [4294670.603000] Cannot allocate resource for EISA slot 8
Jan  1 12:38:23 localhost kernel: [4294670.603000] EISA: Detected 0 cards.
Jan  1 12:38:23 localhost kernel: [4294670.603000] NET: Registered protocol family 2
Jan  1 12:38:23 localhost kernel: [4294670.613000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 12:38:23 localhost kernel: [4294670.613000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
Jan  1 12:38:23 localhost kernel: [4294670.614000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 12:38:23 localhost kernel: [4294670.614000] TCP: Hash tables configured (established 131072 bind 65536)
Jan  1 12:38:23 localhost kernel: [4294670.614000] TCP reno registered
Jan  1 12:38:23 localhost kernel: [4294670.614000] TCP bic registered
Jan  1 12:38:23 localhost kernel: [4294670.614000] NET: Registered protocol family 1
Jan  1 12:38:23 localhost kernel: [4294670.614000] NET: Registered protocol family 8
Jan  1 12:38:23 localhost kernel: [4294670.614000] NET: Registered protocol family 20
Jan  1 12:38:23 localhost kernel: [4294670.614000] Using IPI Shortcut mode
Jan  1 12:38:23 localhost kernel: [4294670.615000] ACPI wakeup devices: 
Jan  1 12:38:23 localhost kernel: [4294670.615000] PCI0 MDEM AUDI  LAN Z001 Z002 Z003  LID 
Jan  1 12:38:23 localhost kernel: [4294670.615000] ACPI: (supports S0 S3 S4 S5)
Jan  1 12:38:23 localhost kernel: [4294670.615000] Freeing unused kernel memory: 256k freed
Jan  1 12:38:23 localhost kernel: [4294670.641000] input: AT Translated Set 2 keyboard as /class/input/input0
Jan  1 12:38:23 localhost kernel: [4294670.719000] vga16fb: initializing
Jan  1 12:38:23 localhost kernel: [4294670.719000] vga16fb: mapped to 0xc00a0000
Jan  1 12:38:23 localhost kernel: [4294670.885000] Console: switching to colour frame buffer device 80x25
Jan  1 12:38:23 localhost kernel: [4294670.885000] fb0: VGA16 VGA frame buffer device
Jan  1 12:38:23 localhost kernel: [4294671.914000] Capability LSM initialized
Jan  1 12:38:23 localhost kernel: [4294671.960000] ACPI: CPU0 (power states: C1[C1] C2[C2])
Jan  1 12:38:23 localhost kernel: [4294672.119000] ACPI: Thermal Zone [THRM] (48 C)
Jan  1 12:38:23 localhost kernel: [4294672.645000] ALI15X3: IDE controller at PCI slot 0000:00:10.0
Jan  1 12:38:23 localhost kernel: [4294672.645000] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
Jan  1 12:38:23 localhost kernel: [4294672.645000] ALI15X3: chipset revision 196
Jan  1 12:38:23 localhost kernel: [4294672.645000] ALI15X3: not 100%% native mode: will probe irqs later
Jan  1 12:38:23 localhost kernel: [4294672.645000]     ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio
Jan  1 12:38:23 localhost kernel: [4294672.645000]     ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:pio
Jan  1 12:38:23 localhost kernel: [4294672.645000] Probing IDE interface ide0...
Jan  1 12:38:23 localhost kernel: [4294672.910000] hda: IC25N040ATMR04-0, ATA DISK drive
Jan  1 12:38:23 localhost kernel: [4294673.522000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan  1 12:38:23 localhost kernel: [4294673.522000] Probing IDE interface ide1...
Jan  1 12:38:23 localhost kernel: [4294674.194000] hdc: MATSHITACD-RW CW-8122, ATAPI CD/DVD-ROM drive
Jan  1 12:38:23 localhost kernel: [4294674.500000] ide1 at 0x170-0x177,0x376 on irq 15
Jan  1 12:38:23 localhost kernel: [4294674.512000] hda: max request size: 128KiB
Jan  1 12:38:23 localhost kernel: [4294674.534000] hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(33)
Jan  1 12:38:23 localhost kernel: [4294674.534000] hda: cache flushes supported
Jan  1 12:38:23 localhost kernel: [4294674.534000]  hda: hda1 hda2 < hda5 >
Jan  1 12:38:23 localhost kernel: [4294674.574000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jan  1 12:38:23 localhost kernel: [4294674.574000] Uniform CD-ROM driver Revision: 3.20
Jan  1 12:38:23 localhost kernel: [4294674.908000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Jan  1 12:38:23 localhost kernel: [4294674.944000] cdrom: open failed.
Jan  1 12:38:23 localhost kernel: [4294675.138000] Attempting manual resume
Jan  1 12:38:23 localhost kernel: [4294675.191000] EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 12:38:23 localhost kernel: [4294675.204000] kjournald starting.  Commit interval 5 seconds
Jan  1 12:38:23 localhost kernel: [4294677.296000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Jan  1 12:38:23 localhost kernel: [4294677.296000] md: bitmap version 4.39
Jan  1 12:38:23 localhost kernel: [4294681.242000] Adding 1544184k swap on /dev/mapper/Ubuntu-swap_1.  Priority:-1 extents:1 across:1544184k
Jan  1 12:38:23 localhost kernel: [4294681.549000] EXT3 FS on dm-0, internal journal
Jan  1 12:38:23 localhost kernel: [4294684.273000] usbcore: registered new driver usbfs
Jan  1 12:38:23 localhost kernel: [4294684.273000] usbcore: registered new driver hub
Jan  1 12:38:23 localhost kernel: [4294684.295000] USB Universal Host Controller Interface driver v2.3
Jan  1 12:38:23 localhost kernel: [4294684.296000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Jan  1 12:38:23 localhost kernel: [4294684.296000] PCI: setting IRQ 11 as level-triggered
Jan  1 12:38:23 localhost kernel: [4294684.296000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Jan  1 12:38:23 localhost kernel: [4294684.296000] uhci_hcd 0000:00:0b.0: UHCI Host Controller
Jan  1 12:38:23 localhost kernel: [4294684.296000] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
Jan  1 12:38:23 localhost kernel: [4294684.296000] uhci_hcd 0000:00:0b.0: irq 11, io base 0x00001800
Jan  1 12:38:23 localhost kernel: [4294684.296000] hub 1-0:1.0: USB hub found
Jan  1 12:38:23 localhost kernel: [4294684.296000] hub 1-0:1.0: 2 ports detected
Jan  1 12:38:23 localhost kernel: [4294684.315000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
Jan  1 12:38:23 localhost kernel: [4294684.315000] Yenta: CardBus bridge found at 0000:00:0a.0 [152d:2201]
Jan  1 12:38:23 localhost kernel: [4294684.315000] Yenta: Enabling burst memory read transactions
Jan  1 12:38:23 localhost kernel: [4294684.315000] Yenta: Using CSCINT to route CSC interrupts to PCI
Jan  1 12:38:23 localhost kernel: [4294684.315000] Yenta: Routing CardBus interrupts to PCI
Jan  1 12:38:23 localhost kernel: [4294684.315000] Yenta TI: socket 0000:00:0a.0, mfunc 0x01201212, devctl 0x64
Jan  1 12:38:23 localhost kernel: [4294684.336000] Linux agpgart interface v0.101 (c) Dave Jones
Jan  1 12:38:23 localhost kernel: [4294684.337000] agpgart: Detected ALi M1671 chipset
Jan  1 12:38:23 localhost kernel: [4294684.348000] agpgart: AGP aperture is 128M @ 0xf0000000
Jan  1 12:38:23 localhost kernel: [4294684.397000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
Jan  1 12:38:23 localhost kernel: [4294684.397000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
Jan  1 12:38:23 localhost kernel: [4294684.397000] uhci_hcd 0000:00:0b.1: UHCI Host Controller
Jan  1 12:38:23 localhost kernel: [4294684.397000] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
Jan  1 12:38:23 localhost kernel: [4294684.397000] uhci_hcd 0000:00:0b.1: irq 10, io base 0x00001820
Jan  1 12:38:23 localhost kernel: [4294684.397000] hub 2-0:1.0: USB hub found
Jan  1 12:38:23 localhost kernel: [4294684.397000] hub 2-0:1.0: 2 ports detected
Jan  1 12:38:23 localhost kernel: [4294684.463000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan  1 12:38:23 localhost kernel: [4294684.538000] Yenta: ISA IRQ mask 0x00f8, PCI irq 10
Jan  1 12:38:23 localhost kernel: [4294684.538000] Socket status: 30000006
Jan  1 12:38:23 localhost kernel: [4294684.545000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan  1 12:38:23 localhost kernel: [4294684.558000] Real Time Clock Driver v1.12
Jan  1 12:38:23 localhost kernel: [4294684.637000] ieee1394: Initialized config rom entry `ip1394'
Jan  1 12:38:23 localhost kernel: [4294684.640000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
Jan  1 12:38:23 localhost kernel: [4294684.640000] PCI: Enabling device 0000:00:0c.0 (0010 -> 0012)
Jan  1 12:38:23 localhost kernel: [4294684.640000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Jan  1 12:38:23 localhost kernel: [4294684.696000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[e8002800-e8002fff]  Max Packet=[2048]
Jan  1 12:38:23 localhost kernel: [4294684.725000] ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
Jan  1 12:38:23 localhost kernel: [4294684.726000] ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted.
Jan  1 12:38:23 localhost kernel: [4294684.777000] input: PS/2 Mouse as /class/input/input1
Jan  1 12:38:23 localhost kernel: [4294684.797000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
Jan  1 12:38:23 localhost kernel: [4294684.811000] usb 2-1: new low speed USB device using uhci_hcd and address 2
Jan  1 12:38:23 localhost kernel: [4294684.977000] nvidia: module license 'NVIDIA' taints kernel.
Jan  1 12:38:23 localhost kernel: [4294684.982000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jan  1 12:38:23 localhost kernel: [4294684.982000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  1 12:38:23 localhost kernel: [4294684.983000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-8174  Tue Nov 22 17:48:37 PST 2005
Jan  1 12:38:23 localhost kernel: [4294685.002000] PCI: Enabling device 0000:00:0b.2 (0010 -> 0012)
Jan  1 12:38:23 localhost kernel: [4294685.002000] ACPI: PCI Interrupt 0000:00:0b.2[C] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
Jan  1 12:38:23 localhost kernel: [4294685.002000] PCI: Via IRQ fixup for 0000:00:0b.2, from 255 to 10
Jan  1 12:38:23 localhost kernel: [4294685.002000] input: PC Speaker as /class/input/input3
Jan  1 12:38:23 localhost kernel: [4294685.008000] ehci_hcd 0000:00:0b.2: EHCI Host Controller
Jan  1 12:38:23 localhost kernel: [4294685.009000] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 3
Jan  1 12:38:23 localhost kernel: [4294685.009000] ehci_hcd 0000:00:0b.2: irq 10, io mem 0xe8002000
Jan  1 12:38:23 localhost kernel: [4294685.009000] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Jan  1 12:38:23 localhost kernel: [4294685.009000] hub 3-0:1.0: USB hub found
Jan  1 12:38:23 localhost kernel: [4294685.009000] hub 3-0:1.0: 4 ports detected
Jan  1 12:38:23 localhost kernel: [4294685.078000] usb 2-1: USB disconnect, address 2
Jan  1 12:38:23 localhost kernel: [4294685.088000] parport: PnPBIOS parport detected.
Jan  1 12:38:23 localhost kernel: [4294685.088000] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Jan  1 12:38:23 localhost kernel: [4294685.330000] ts: Compaq touchscreen protocol output
Jan  1 12:38:23 localhost kernel: [4294685.375000] natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
Jan  1 12:38:23 localhost kernel: [4294685.375000]   originally by Donald Becker <becker@scyld.com>
Jan  1 12:38:23 localhost kernel: [4294685.375000]   http://www.scyld.com/network/natsemi.html
Jan  1 12:38:23 localhost kernel: [4294685.375000]   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
Jan  1 12:38:23 localhost kernel: [4294685.376000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Jan  1 12:38:23 localhost kernel: [4294685.376000] PCI: setting IRQ 5 as level-triggered
Jan  1 12:38:23 localhost kernel: [4294685.376000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Jan  1 12:38:23 localhost kernel: [4294685.378000] natsemi eth0: NatSemi DP8381[56] at 0xe8003000 (0000:00:12.0), 00:c0:9f:29:4d:b4, IRQ 5, port TP.
Jan  1 12:38:23 localhost kernel: [4294685.464000] PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
Jan  1 12:38:23 localhost kernel: [4294685.464000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
Jan  1 12:38:23 localhost kernel: [4294685.464000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
Jan  1 12:38:23 localhost kernel: [4294685.704000] usb 2-1: new low speed USB device using uhci_hcd and address 3
Jan  1 12:38:23 localhost kernel: [4294685.717000] cs: IO port probe 0x100-0x3af: clean.
Jan  1 12:38:23 localhost kernel: [4294685.719000] cs: IO port probe 0x3c0-0x3d2: clean.
Jan  1 12:38:23 localhost kernel: [4294685.719000] cs: IO port probe 0x3d4-0x4ff: excluding 0x404-0x40b 0x47c-0x493 0x4cc-0x4db
Jan  1 12:38:23 localhost kernel: [4294685.720000] cs: IO port probe 0xc00-0xcf7: clean.
Jan  1 12:38:23 localhost kernel: [4294685.721000] cs: IO port probe 0xa00-0xaff: clean.
Jan  1 12:38:23 localhost kernel: [4294685.955000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00000d8026]
Jan  1 12:38:23 localhost kernel: [4294686.224000] usbcore: registered new driver hiddev
Jan  1 12:38:23 localhost kernel: [4294686.246000] input: Logitech Optical USB Mouse as /class/input/input4
Jan  1 12:38:23 localhost kernel: [4294686.246000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0b.1-1
Jan  1 12:38:23 localhost kernel: [4294686.246000] usbcore: registered new driver usbhid
Jan  1 12:38:23 localhost kernel: [4294686.246000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan  1 12:38:23 localhost kernel: [4294696.853000] AC'97 1 does not respond - RESET
Jan  1 12:38:23 localhost kernel: [4294696.853000] AC'97 1 access is not valid [0xffffffff], removing mixer.
Jan  1 12:38:23 localhost kernel: [4294696.853000] ali mixer 1 creating error.
Jan  1 12:38:23 localhost kernel: [4294697.457000] lp0: using parport0 (interrupt-driven).
Jan  1 12:38:23 localhost kernel: [4294697.567000] SCSI subsystem initialized
Jan  1 12:38:23 localhost kernel: [4294697.587000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
Jan  1 12:38:23 localhost kernel: [4294697.587000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
Jan  1 12:38:23 localhost kernel: [4294697.587000] ieee1394: sbp2: Try serialize_io=0 for better performance
Jan  1 12:38:23 localhost kernel: [4294702.421000] cdrom: open failed.
Jan  1 12:38:23 localhost kernel: [4294703.233000] kjournald starting.  Commit interval 5 seconds
Jan  1 12:38:23 localhost kernel: [4294703.233000] EXT3 FS on hda1, internal journal
Jan  1 12:38:23 localhost kernel: [4294703.233000] EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 12:38:23 localhost kernel: [4294706.722000] eth0: DSPCFG accepted after 0 usec.
Jan  1 12:38:23 localhost kernel: [4294706.722000] eth0: link up.
Jan  1 12:38:23 localhost kernel: [4294707.306000] NET: Registered protocol family 17
Jan  1 12:38:23 localhost kernel: [4294711.243000] NET: Registered protocol family 10
Jan  1 12:38:23 localhost kernel: [4294711.243000] lo: Disabled Privacy Extensions
Jan  1 12:38:23 localhost kernel: [4294711.243000] IPv6 over IPv4 tunneling driver
Jan  1 12:38:23 localhost kernel: [4294712.839000] ACPI: AC Adapter [ACAD] (on-line)
Jan  1 12:38:23 localhost kernel: [4294712.899000] ACPI: Battery Slot [BAT1] (battery present)
Jan  1 12:38:23 localhost kernel: [4294712.922000] ACPI: Power Button (FF) [PWRF]
Jan  1 12:38:23 localhost kernel: [4294712.922000] ACPI: Power Button (CM) [PWRB]
Jan  1 12:38:23 localhost kernel: [4294712.922000] ACPI: Lid Switch [LID]
Jan  1 12:38:23 localhost kernel: [4294713.024000] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
Jan  1 12:38:23 localhost kernel: [4294713.024000] ibm_acpi: http://ibm-acpi.sf.net/
Jan  1 12:38:23 localhost kernel: [4294713.160000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Jan  1 12:38:29 localhost kernel: [4294720.183000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Jan  1 12:38:29 localhost kernel: [4294720.183000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Jan  1 12:38:29 localhost kernel: [4294720.183000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Jan  1 12:38:29 localhost kernel: [4294720.422000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Jan  1 12:38:29 localhost kernel: [4294720.423000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Jan  1 12:38:29 localhost kernel: [4294720.423000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Jan  1 12:38:30 localhost kernel: [4294721.401000] eth0: no IPv6 routers present
Jan  1 12:38:34 localhost kernel: [4294725.303000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Jan  1 12:38:34 localhost kernel: [4294725.303000] apm: overridden by ACPI.
Jan  1 12:38:34 localhost kernel: [4294725.517000] ip_tables: (C) 2000-2002 Netfilter core team
Jan  1 12:38:34 localhost kernel: [4294725.566000] Netfilter messages via NETLINK v0.30.
Jan  1 12:38:34 localhost kernel: [4294725.580000] ip_conntrack version 2.4 (8183 buckets, 65464 max) - 232 bytes per conntrack
Jan  1 12:38:35 localhost kernel: [4294726.671000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Jan  1 12:38:35 localhost kernel: [4294726.671000] hdc: drive_cmd: error=0x04 { AbortedCommand }
Jan  1 12:38:35 localhost kernel: [4294726.671000] ide: failed opcode was: 0xec
Jan  1 12:38:36 localhost kernel: [4294726.697000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Jan  1 12:38:36 localhost kernel: [4294726.697000] hdc: drive_cmd: error=0x04 { AbortedCommand }
Jan  1 12:38:36 localhost kernel: [4294726.697000] ide: failed opcode was: 0xec
Jan  1 12:38:36 localhost kernel: [4294727.329000] acpi-cpufreq: CPU0 - ACPI performance management activated.