e1000 driver in Kernel 2.6.27-4 not working

Bug #275611 reported by William Marques on 2008-09-28
2
Affects Status Importance Assigned to Milestone
Launchpad itself
Undecided
Unassigned
linux (Ubuntu)
Undecided
Unassigned

Bug Description

When upgrading from kernel 2.6.27-3 to kernel 2.6.27-4 my ethernet NIC stop working.
No changes made, in any configuration.

Follows My Hardware:
Notebook toshiba Tecra A8
CPU Genuine Intel(R) CPU T2300 @ 1.66GHz
2.5 GB RAM
60 GB HD

Ethernet Card:

lspci -vv

01:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
 Subsystem: Toshiba America Info Systems Device 0001
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 221
 Region 0: Memory at ffce0000 (32-bit, non-prefetchable) [size=128K]
 Region 2: I/O ports at bfe0 [size=32]
 Capabilities: [c8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0300c Data: 414a
 Capabilities: [e0] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
   ClockPM+ Suprise- LLActRep- BwNot-
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Advanced Error Reporting <?>
 Capabilities: [140] Device Serial Number 5a-ce-c7-ff-ff-b7-15-00
 Kernel driver in use: e1000e
 Kernel modules: e1000e

If I remove the line of the card in /etc/udev/rules.d/70-persistent-net.rules and boot with kernel 2.6.27-4, nothing happens, it's like the card does not exist.
If I modprobe e1000, and try to bring up manually eth0:

eth0: error fetching interface information: Device not found
If I boot back in kernel 2.6.27-3, everything works fine, /etc/udev/rules.d/70-persistent-net.rules is correctly configured, and so on.

Martin Albisetti (beuno) wrote :

I'm sorry, but this has nothing to do with Launchpad as a software.
Please file a bug against the kernel package in the Ubuntu project.

Changed in launchpad-foundations:
status: New → Invalid
To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.

Other bug subscribers