Initializing interface 'wlan0' conf '/home/chris/eduroam.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/home/chris/eduroam.conf' -> '/home/chris/eduroam.conf'
Reading configuration file '/home/chris/eduroam.conf'
Priority group 0
   id=0 ssid='eduroam'
Initializing interface (2) 'wlan0'
Interface wlan0 set UP - waiting a second for the driver to complete initialization
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf flags 0x0
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: xx:xx:xx:xx:xx:xx
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan0
Ignore event for foreign ifindex 3
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b19 len=8
Received 797 bytes of scan results (3 BSSes)
CTRL-EVENT-SCAN-RESULTS 
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1a:1e:bc:43:60 ssid='eduroam' wpa_ie_len=22 rsn_ie_len=20 caps=0x11
   selected based on RSN IE
   selected WPA AP 00:1a:1e:bc:43:60 ssid='eduroam'
Try to find non-WPA AP
Trying to associate with 00:1a:1e:bc:43:60 (SSID='eduroam' freq=2412 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 8 pairwise 16 key_mgmt 1 proto 2
WPA: set AP WPA IE - hexdump(len=24): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
WPA: set AP RSN IE - hexdump(len=22): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT 802.1X
WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: DISCONNECTED -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
wpa_driver_wext_set_psk
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8c02 len=161
Association info event
req_ies - hexdump(len=47): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx 00
resp_ies - hexdump(len=16): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
WPA: set own WPA/RSN IE - hexdump(len=22): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:1a:1e:bc:43:60
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:1a:1e:bc:43:60
No keys have been configured - skip key clearing
Associated with 00:1a:1e:bc:43:60
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RX EAPOL from 00:1a:1e:bc:43:60
Setting authentication timeout: 70 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using real identity - hexdump_ascii(len=22):
     xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx   xxxxxxxx@reading
     xx xx xx xx xx xx                                 .ac.uk          
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:1a:1e:bc:43:60
EAPOL: SUPP_BE entering state RECEIVE
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
EAPOL: startWhen --> 0
EAPOL: authWhile --> 0
EAPOL: SUPP_BE entering state TIMEOUT
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using real identity - hexdump_ascii(len=22):
     xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx   xxxxxxxx@reading
     xx xx xx xx xx xx                                 .ac.uk          
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:1a:1e:bc:43:60
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=2 method=25 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: configuration does not allow: vendor 0 method 25
EAP: vendor 0 method 25 not allowed
EAP: Building EAP-Nak (requested type 25 vendor=0 method=0 not allowed)
EAP: allowed methods - hexdump(len=1): 15
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:1a:1e:bc:43:60
EAPOL: SUPP_BE entering state RECEIVE
EAPOL: startWhen --> 0
EAPOL: authWhile --> 0
EAPOL: SUPP_BE entering state TIMEOUT
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=3 method=21 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: Initialize selected EAP method: vendor 0 method 21 (TTLS)
EAP-TTLS: Phase2 type: PAP
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
EAP: EAP entering state METHOD
SSL: Received packet(len=6) - Flags 0x20
EAP-TTLS: Start (server ver=0, own ver=0)
EAP-TTLS: Start
SSL: (where=0x10 ret=0x1)
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:before/connect initialization
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write client hello A
SSL: (where=0x1002 ret=0xffffffff)
SSL: SSL_connect:error in SSLv3 read server hello A
SSL: SSL_connect - want more data
SSL: 93 bytes pending from ssl_out
SSL: 93 bytes left to be sent out (of total 93 bytes)
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:1a:1e:bc:43:60
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=4 method=21 vendor=0 vendorMethod=0
EAP: EAP entering state METHOD
SSL: Received packet(len=1024) - Flags 0xc0
SSL: TLS Message Length: 2964
SSL: Need 1950 bytes more input data
SSL: Building ACK (type=21 id=4 ver=0)
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:1a:1e:bc:43:60
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=5 method=21 vendor=0 vendorMethod=0
EAP: EAP entering state METHOD
SSL: Received packet(len=1024) - Flags 0xc0
SSL: TLS Message Length: 2964
SSL: Need 936 bytes more input data
SSL: Building ACK (type=21 id=5 ver=0)
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:1a:1e:bc:43:60
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=6 method=21 vendor=0 vendorMethod=0
EAP: EAP entering state METHOD
SSL: Received packet(len=946) - Flags 0x80
SSL: TLS Message Length: 2964
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server hello A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server certificate A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server key exchange A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server done A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write client key exchange A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write change cipher spec A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write finished A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 flush data
SSL: (where=0x1002 ret=0xffffffff)
SSL: SSL_connect:error in SSLv3 read finished A
SSL: SSL_connect - want more data
SSL: 326 bytes pending from ssl_out
SSL: 326 bytes left to be sent out (of total 326 bytes)
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:1a:1e:bc:43:60
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=7 method=21 vendor=0 vendorMethod=0
EAP: EAP entering state METHOD
SSL: Received packet(len=69) - Flags 0x80
SSL: TLS Message Length: 59
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read finished A
SSL: (where=0x20 ret=0x1)
SSL: (where=0x1002 ret=0x1)
SSL: 0 bytes pending from ssl_out
OpenSSL: tls_connection_handshake - Failed to read possible Application Data error:00000000:lib(0):func(0):reason(0)
SSL: No data to be sent out
EAP-TTLS: TLS done, proceed to Phase 2
EAP-TTLS: Derived key - hexdump(len=64): [REMOVED]
EAP-TTLS: received 0 bytes encrypted data for Phase 2
EAP-TTLS: empty data in beginning of Phase 2 - use fake EAP-Request Identity
EAP-TTLS: Phase 2 PAP Request
EAP-TTLS: Encrypting Phase 2 data - hexdump(len=56): [REMOVED]
SSL: 122 bytes left to be sent out (of total 122 bytes)
EAP-TTLS: Authentication completed successfully
EAP: method process -> ignore=FALSE methodState=DONE decision=COND_SUCC
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:1a:1e:bc:43:60
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Success
EAP: EAP entering state SUCCESS
CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
EAPOL: SUPP_BE entering state RECEIVE
EAPOL: SUPP_BE entering state SUCCESS
EAPOL: SUPP_BE entering state IDLE
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=117
  EAPOL-Key type=2
  key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  key_length=16 key_data_length=22
  replay_counter - hexdump(len=8): xx xx xx xx xx xx xx xx
  key_nonce - hexdump(len=32): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
  key_iv - hexdump(len=16): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
  key_rsc - hexdump(len=8): xx xx xx xx xx xx xx xx
  key_id (reserved) - hexdump(len=8): xx xx xx xx xx xx xx xx
  key_mic - hexdump(len=16): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from 00:1a:1e:bc:43:60 (ver=2)
RSN: msg 1/4 key data - hexdump(len=22): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
RSN: PMKID from Authenticator - hexdump(len=16): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
RSN: no matching PMKID found
EAPOL: Successfully fetched key (len=32)
EAPOL: Successfully fetched key (len=64)
WPA: PMK from EAPOL state machines - hexdump(len=32): [REMOVED]
RSN: added PMKSA cache entry for 00:1a:1e:bc:43:60
RSN: the new PMK matches with the PMKID
WPA: Renewed SNonce - hexdump(len=32): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
WPA: PTK derivation - A1=xx:xx:xx:xx:xx:xx A2=00:1a:1e:bc:43:60
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
WPA: Sending EAPOL-Key 2/4
RX EAPOL from 00:1a:1e:bc:43:60
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=167
  EAPOL-Key type=2
  key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
  key_length=16 key_data_length=72
  replay_counter - hexdump(len=8): xx xx xx xx xx xx xx xx
  key_nonce - hexdump(len=32): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
  key_iv - hexdump(len=16): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
  key_rsc - hexdump(len=8): xx xx xx xx xx xx xx xx
  key_id (reserved) - hexdump(len=8): xx xx xx xx xx xx xx xx
  key_mic - hexdump(len=16): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
RSN: encrypted key data - hexdump(len=72): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
WPA: decrypted EAPOL-Key key data - hexdump(len=64): [REMOVED]
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
WPA: RX message 3 of 4-Way Handshake from 00:1a:1e:bc:43:60 (ver=2)
WPA: IE KeyData - hexdump(len=64): xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
WPA: Sending EAPOL-Key 4/4
WPA: Installing PTK to the driver.
wpa_driver_wext_set_key: alg=3 key_idx=0 set_tx=1 seq_len=6 key_len=16
EAPOL: External notification - portValid=1
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL authentication completed successfully
State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RSN: received GTK in pairwise handshake - hexdump(len=34): [REMOVED]
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0 len=32).
WPA: RSC - hexdump(len=6): xx xx xx xx xx xx
wpa_driver_wext_set_key: alg=2 key_idx=1 set_tx=0 seq_len=6 key_len=32
WPA: Key negotiation completed with 00:1a:1e:bc:43:60 [PTK=CCMP GTK=TKIP]
Cancelling authentication timeout
State: GROUP_HANDSHAKE -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to 00:1a:1e:bc:43:60 completed (auth) [id=0 id_str=]
wpa_driver_wext_set_operstate: operstate 0->1 (UP)
WEXT: Operstate: linkmode=-1, operstate=6
EAPOL: External notification - portValid=1
RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
EAPOL: startWhen --> 0
EAPOL: authWhile --> 0
EAPOL: idleWhile --> 0
EAPOL: disable timer tick