This is unusual, as the e1000e_nvm -r –d eth0 -o ethtool.dmp command normally dumps out the 1Gb portion of the system flash even if it _does_ have a bad checksum, and then I've been fixing the checksum & content. Are you sure that there isn't an ethtool.dmp file created in the local directory from which you ran e1000e_nvm ? If there really is no ethtool.dmp, please send me 1) lspci -tv 2) lspci -xxx 3) dmesg (that includes the failure of the e1000e driver to load) and I'll send you an instrumented driver that will dump out the 1Gb flash content, and we may be able to fix it from there. At least I hope so. As I say, I've fixed a lot of these corruptions, but do not recall seeing this particular failure mode before. Dave -----Original Message----- From: