[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-8-server (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 6 18:18:16 UTC 2008 (Ubuntu 2.6.27-8.17-server) [ 0.000000] Command line: root=UUID=e6da19f0-b60e-4302-8ae0-1e5cca27977c ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfff0000 page 4k [ 0.000000] kernel direct mapping tables up to bfff0000 @ 8000-d000 [ 0.000000] last_map_addr: bfff0000 end: bfff0000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] last_map_addr: 140000000 end: 140000000 [ 0.000000] RAMDISK: 377ba000 - 37fef2a8 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F7560, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT BFFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP BFFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT BFFF3180, 65F2 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS BFFF0000, 0040 [ 0.000000] ACPI: SSDT BFFF9880, 0146 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: MCFG BFFF9A40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC BFFF97C0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [000000000000c000 - 0000000000033fff] pages 28 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b7f9c] TEXT DATA BSS ==> [0000200000 - 00008b7f9c] [ 0.000000] #3 [00377ba000 - 0037fef2a8] RAMDISK ==> [00377ba000 - 0037fef2a8] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f54c0] 000f54c0 [ 0.000000] [ffffe20000000000-ffffe20004ffffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfff0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048463 [ 0.000000] DMA zone: 2111 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 766000 pages, LIFO batch:31 [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfff3000 [ 0.000000] PM: Registered nosave memory: 00000000bfff3000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026159 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=e6da19f0-b60e-4302-8ae0-1e5cca27977c ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 1809.236 MHz processor. [ 0.010000] spurious 8259A interrupt: IRQ7. [ 0.010000] Console: colour VGA+ 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] Checking aperture... [ 0.010000] No AGP bridge found [ 0.010000] Node 0: aperture @ 20000000 size 32 MB [ 0.010000] Aperture pointing to e820 RAM. Ignoring. [ 0.010000] Your BIOS doesn't leave a aperture memory hole [ 0.010000] Please enable the IOMMU option in the BIOS setup [ 0.010000] This costs you 64 MB of RAM [ 0.010000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.010000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.010000] Memory: 4047108k/5242880k available (3111k kernel code, 146744k reserved, 1573k data, 540k init) [ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.010000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.010009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3618.47 BogoMIPS (lpj=18092360) [ 0.010039] Security Framework initialized [ 0.010046] SELinux: Disabled at boot. [ 0.010066] AppArmor: AppArmor initialized [ 0.010507] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013611] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.015193] Mount-cache hash table entries: 256 [ 0.015406] Initializing cgroup subsys ns [ 0.015410] Initializing cgroup subsys cpuacct [ 0.015413] Initializing cgroup subsys memory [ 0.015429] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.015432] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.015434] CPU 0/0 -> Node 0 [ 0.015436] tseg: 0000000000 [ 0.015450] CPU: Physical Processor ID: 0 [ 0.015452] CPU: Processor Core ID: 0 [ 0.016933] ACPI: Core revision 20080609 [ 0.019054] ACPI: Checking initramfs for custom DSDT [ 0.410416] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.511373] CPU0: Dual Core AMD Opteron(tm) Processor 165 stepping 02 [ 0.511378] Using local APIC timer interrupts. [ 0.520001] APIC timer calibration result 12564162 [ 0.520003] Detected 12.564 MHz APIC timer. [ 0.520164] Booting processor 1/1 ip 6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 3618.52 BogoMIPS (lpj=18092619) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.010000] CPU 1/1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.680261] CPU1: Dual Core AMD Opteron(tm) Processor 165 stepping 02 [ 0.680279] Brought up 2 CPUs [ 0.680281] Total of 2 processors activated (7236.99 BogoMIPS). [ 0.680332] CPU0 attaching sched-domain: [ 0.680335] domain 0: span 0-1 level CPU [ 0.680337] groups: 0 1 [ 0.680341] domain 1: span 0-1 level NODE [ 0.680343] groups: 0-1 [ 0.680348] CPU1 attaching sched-domain: [ 0.680350] domain 0: span 0-1 level CPU [ 0.680352] groups: 1 0 [ 0.680356] domain 1: span 0-1 level NODE [ 0.680358] groups: 0-1 [ 0.680450] net_namespace: 1552 bytes [ 0.680450] Booting paravirtualized kernel on bare hardware [ 0.680450] Time: 2:53:43 Date: 11/13/08 [ 0.680450] NET: Registered protocol family 16 [ 0.680450] node 0 link 0: io port [1000, fffff] [ 0.680450] TOM: 00000000c0000000 aka 3072M [ 0.680450] node 0 link 0: mmio [e0000000, efffffff] [ 0.680450] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.680450] node 0 link 0: mmio [a0000, bffff] [ 0.680450] node 0 link 0: mmio [c0000000, fed3ffff] [ 0.680450] TOM2: 0000000140000000 aka 5120M [ 0.680450] bus: [00,ff] on node 0 link 0 [ 0.680450] bus: 00 index 0 io port: [0, ffff] [ 0.680450] bus: 00 index 1 mmio: [c0000000, ffffffff] [ 0.680450] bus: 00 index 2 mmio: [feb00000, fec0ffff] [ 0.680450] bus: 00 index 3 mmio: [a0000, bffff] [ 0.680450] bus: 00 index 4 mmio: [140000000, fcffffffff] [ 0.680450] ACPI: bus type pci registered [ 0.680450] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.680450] PCI: MCFG area at e0000000 reserved in E820 [ 0.695271] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.695273] PCI: Using configuration type 1 for base access [ 0.695294] ACPI: EC: Look up EC in DSDT [ 0.709922] ACPI: Interpreter enabled [ 0.709925] ACPI: (supports S0 S1 S4 S5) [ 0.709943] ACPI: Using IOAPIC for interrupt routing [ 0.721145] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.721145] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.721145] PCI: 0000:00:01.1 reg 10 io port: [e400, e41f] [ 0.721145] PCI: 0000:00:01.1 reg 20 io port: [4c00, 4c3f] [ 0.721145] PCI: 0000:00:01.1 reg 24 io port: [4c40, 4c7f] [ 0.721145] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.721145] pci 0000:00:01.1: PME# disabled [ 0.721145] PCI: 0000:00:02.0 reg 10 32bit mmio: [d8004000, d8004fff] [ 0.721145] pci 0000:00:02.0: supports D1 [ 0.721145] pci 0000:00:02.0: supports D2 [ 0.721145] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.721145] pci 0000:00:02.0: PME# disabled [ 0.721145] PCI: 0000:00:02.1 reg 10 32bit mmio: [feb00000, feb000ff] [ 0.721145] pci 0000:00:02.1: supports D1 [ 0.721145] pci 0000:00:02.1: supports D2 [ 0.721145] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.721145] pci 0000:00:02.1: PME# disabled [ 0.721145] PCI: 0000:00:04.0 reg 10 io port: [dc00, dcff] [ 0.721145] PCI: 0000:00:04.0 reg 14 io port: [e000, e0ff] [ 0.721145] PCI: 0000:00:04.0 reg 18 32bit mmio: [d8003000, d8003fff] [ 0.721145] pci 0000:00:04.0: supports D1 [ 0.721145] pci 0000:00:04.0: supports D2 [ 0.721145] PCI: 0000:00:06.0 reg 20 io port: [f000, f00f] [ 0.721145] PCI: 0000:00:07.0 reg 10 io port: [9f0, 9f7] [ 0.721145] PCI: 0000:00:07.0 reg 14 io port: [bf0, bf3] [ 0.721145] PCI: 0000:00:07.0 reg 18 io port: [970, 977] [ 0.721145] PCI: 0000:00:07.0 reg 1c io port: [b70, b73] [ 0.721145] PCI: 0000:00:07.0 reg 20 io port: [d800, d80f] [ 0.721145] PCI: 0000:00:07.0 reg 24 32bit mmio: [d8002000, d8002fff] [ 0.721145] PCI: 0000:00:08.0 reg 10 io port: [9e0, 9e7] [ 0.721145] PCI: 0000:00:08.0 reg 14 io port: [be0, be3] [ 0.721145] PCI: 0000:00:08.0 reg 18 io port: [960, 967] [ 0.721145] PCI: 0000:00:08.0 reg 1c io port: [b60, b63] [ 0.721145] PCI: 0000:00:08.0 reg 20 io port: [c400, c40f] [ 0.721145] PCI: 0000:00:08.0 reg 24 32bit mmio: [d8001000, d8001fff] [ 0.721145] PCI: 0000:00:0a.0 reg 10 32bit mmio: [d8000000, d8000fff] [ 0.721145] PCI: 0000:00:0a.0 reg 14 io port: [b000, b007] [ 0.721145] pci 0000:00:0a.0: supports D1 [ 0.721145] pci 0000:00:0a.0: supports D2 [ 0.721145] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.721145] pci 0000:00:0a.0: PME# disabled [ 0.721145] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.721145] pci 0000:00:0b.0: PME# disabled [ 0.721145] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.721145] pci 0000:00:0c.0: PME# disabled [ 0.721145] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.721145] pci 0000:00:0d.0: PME# disabled [ 0.721145] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.721145] pci 0000:00:0e.0: PME# disabled [ 0.721145] PCI: 0000:05:06.0 reg 10 32bit mmio: [d0000000, d3ffffff] [ 0.721145] pci 0000:00:09.0: transparent bridge [ 0.721145] PCI: bridge 0000:00:09.0 32bit mmio: [d0000000, d3ffffff] [ 0.721145] PCI: 0000:01:00.0 reg 10 32bit mmio: [d6000000, d6ffffff] [ 0.721145] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, cfffffff] [ 0.721145] PCI: 0000:01:00.0 reg 1c 64bit mmio: [d4000000, d5ffffff] [ 0.721145] PCI: 0000:01:00.0 reg 24 io port: [a000, a07f] [ 0.721145] PCI: 0000:01:00.0 reg 30 32bit mmio: [d7000000, d701ffff] [ 0.721145] PCI: bridge 0000:00:0e.0 io port: [a000, afff] [ 0.721145] PCI: bridge 0000:00:0e.0 32bit mmio: [d4000000, d7ffffff] [ 0.721145] PCI: bridge 0000:00:0e.0 64bit mmio pref: [c0000000, cfffffff] [ 0.721145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.721415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.822915] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.822915] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.822915] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.822915] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.822915] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.822915] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.822915] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.822915] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.822915] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.822915] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.822915] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.822915] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.823084] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.823336] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.823588] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.823838] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.824109] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.824378] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.824642] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.824905] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.825074] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.825348] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.825621] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.825894] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.826165] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.826437] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.830037] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.830310] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.830583] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.830867] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.831151] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.831434] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.831517] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.831517] pnp: PnP ACPI init [ 0.831517] ACPI: bus type pnp registered [ 0.832688] pnp: PnP ACPI: found 13 devices [ 0.832688] ACPI: ACPI bus type pnp unregistered [ 0.832688] PCI: Using ACPI for IRQ routing [ 0.870010] NET: Registered protocol family 8 [ 0.870012] NET: Registered protocol family 20 [ 0.870029] NetLabel: Initializing [ 0.870029] NetLabel: domain hash size = 128 [ 0.870029] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.870042] NetLabel: unlabeled traffic allowed by default [ 0.870097] PCI-DMA: Disabling AGP. [ 0.870268] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.870268] PCI-DMA: using GART IOMMU. [ 0.870268] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.872290] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.872295] actual entries 65586 [ 0.872433] AppArmor: AppArmor Filesystem Enabled [ 0.872462] ACPI: RTC can wake from S4 [ 0.910048] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.910052] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.910055] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.910058] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.910060] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.910063] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.910070] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.910073] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.910076] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.910089] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.910096] system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved [ 0.910099] system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved [ 0.910102] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.910104] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.910107] system 00:0c: iomem range 0xbfff0000-0xbfffffff could not be reserved [ 0.910110] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.910113] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.910116] system 00:0c: iomem range 0x100000-0xbffeffff could not be reserved [ 0.910119] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.910122] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.910125] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.910128] system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved [ 0.910131] system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved [ 0.910134] system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved [ 0.914586] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 [ 0.914588] pci 0000:00:09.0: IO window: disabled [ 0.914592] pci 0000:00:09.0: MEM window: 0xd0000000-0xd3ffffff [ 0.914595] pci 0000:00:09.0: PREFETCH window: disabled [ 0.914599] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 [ 0.914601] pci 0000:00:0b.0: IO window: disabled [ 0.914604] pci 0000:00:0b.0: MEM window: disabled [ 0.914606] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.914610] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.914612] pci 0000:00:0c.0: IO window: disabled [ 0.914615] pci 0000:00:0c.0: MEM window: disabled [ 0.914617] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.914621] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 [ 0.914622] pci 0000:00:0d.0: IO window: disabled [ 0.914625] pci 0000:00:0d.0: MEM window: disabled [ 0.914628] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.914632] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 [ 0.914634] pci 0000:00:0e.0: IO window: 0xa000-0xafff [ 0.914637] pci 0000:00:0e.0: MEM window: 0xd4000000-0xd7ffffff [ 0.914641] pci 0000:00:0e.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.914650] pci 0000:00:09.0: setting latency timer to 64 [ 0.914656] pci 0000:00:0b.0: setting latency timer to 64 [ 0.914662] pci 0000:00:0c.0: setting latency timer to 64 [ 0.914667] pci 0000:00:0d.0: setting latency timer to 64 [ 0.914672] pci 0000:00:0e.0: setting latency timer to 64 [ 0.914675] bus: 00 index 0 io port: [0, ffff] [ 0.914678] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.914680] bus: 05 index 0 mmio: [0, 0] [ 0.914682] bus: 05 index 1 mmio: [d0000000, d3ffffff] [ 0.914684] bus: 05 index 2 mmio: [0, 0] [ 0.914686] bus: 05 index 3 io port: [0, ffff] [ 0.914687] bus: 05 index 4 mmio: [0, ffffffffffffffff] [ 0.914690] bus: 04 index 0 mmio: [0, 0] [ 0.914691] bus: 04 index 1 mmio: [0, 0] [ 0.914693] bus: 04 index 2 mmio: [0, 0] [ 0.914695] bus: 04 index 3 mmio: [0, 0] [ 0.914697] bus: 03 index 0 mmio: [0, 0] [ 0.914698] bus: 03 index 1 mmio: [0, 0] [ 0.914700] bus: 03 index 2 mmio: [0, 0] [ 0.914702] bus: 03 index 3 mmio: [0, 0] [ 0.914703] bus: 02 index 0 mmio: [0, 0] [ 0.914705] bus: 02 index 1 mmio: [0, 0] [ 0.914707] bus: 02 index 2 mmio: [0, 0] [ 0.914709] bus: 02 index 3 mmio: [0, 0] [ 0.914711] bus: 01 index 0 io port: [a000, afff] [ 0.914713] bus: 01 index 1 mmio: [d4000000, d7ffffff] [ 0.914716] bus: 01 index 2 mmio: [c0000000, cfffffff] [ 0.914718] bus: 01 index 3 mmio: [0, 0] [ 0.914730] NET: Registered protocol family 2 [ 0.920016] Switched to high resolution mode on CPU 0 [ 0.920214] Switched to high resolution mode on CPU 1 [ 1.000187] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.001852] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.007532] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.008302] TCP: Hash tables configured (established 524288 bind 65536) [ 1.008305] TCP reno registered [ 1.030125] NET: Registered protocol family 1 [ 1.030254] checking if image is initramfs... it is [ 1.823070] Freeing initrd memory: 8404k freed [ 1.830986] audit: initializing netlink socket (disabled) [ 1.831006] type=2000 audit(1226544823.830:1): initialized [ 1.837678] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.841487] VFS: Disk quotas dquot_6.5.1 [ 1.841605] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.841741] msgmni has been set to 7920 [ 1.841893] io scheduler noop registered [ 1.841896] io scheduler anticipatory registered [ 1.841898] io scheduler deadline registered (default) [ 1.842074] io scheduler cfq registered [ 1.842093] pci 0000:00:00.0: Enabling HT MSI Mapping [ 1.862660] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 1.862668] pci 0000:00:0b.0: Found enabled HT MSI Mapping [ 1.862672] pci 0000:00:0b.0: Linking AER extended capability [ 1.862682] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 1.862689] pci 0000:00:0c.0: Found enabled HT MSI Mapping [ 1.862692] pci 0000:00:0c.0: Linking AER extended capability [ 1.862702] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 1.862709] pci 0000:00:0d.0: Found enabled HT MSI Mapping [ 1.862711] pci 0000:00:0d.0: Linking AER extended capability [ 1.862721] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 1.862728] pci 0000:00:0e.0: Found enabled HT MSI Mapping [ 1.862731] pci 0000:00:0e.0: Linking AER extended capability [ 1.862751] pci 0000:01:00.0: Boot video device [ 1.862893] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 1.862916] pcieport-driver 0000:00:0b.0: found MSI capability [ 1.862938] pci_express 0000:00:0b.0:pcie00: allocate port service [ 1.863003] pci_express 0000:00:0b.0:pcie03: allocate port service [ 1.863094] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.863117] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.863135] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.863195] pci_express 0000:00:0c.0:pcie03: allocate port service [ 1.863285] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 1.863307] pcieport-driver 0000:00:0d.0: found MSI capability [ 1.863325] pci_express 0000:00:0d.0:pcie00: allocate port service [ 1.863387] pci_express 0000:00:0d.0:pcie03: allocate port service [ 1.863477] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 1.863499] pcieport-driver 0000:00:0e.0: found MSI capability [ 1.863516] pci_express 0000:00:0e.0:pcie00: allocate port service [ 1.863586] pci_express 0000:00:0e.0:pcie03: allocate port service [ 1.911684] Linux agpgart interface v0.103 [ 1.911690] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.911858] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.912659] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.915300] brd: module loaded [ 1.915398] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.915552] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.915555] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.916236] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.982685] mice: PS/2 mouse device common for all mice [ 1.982878] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.982900] rtc0: alarms up to one year, y3k [ 1.982961] cpuidle: using governor ladder [ 1.982963] cpuidle: using governor menu [ 1.983382] TCP cubic registered [ 1.983660] registered taskstats version 1 [ 1.983807] Magic number: 0:555:864 [ 1.983871] tty ptyw2: hash matches [ 1.983955] rtc_cmos 00:04: setting system clock to 2008-11-13 02:53:45 UTC (1226544825) [ 1.983959] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.983961] EDD information not available. [ 1.984011] Freeing unused kernel memory: 540k freed [ 1.984366] Write protecting the kernel read-only data: 4344k [ 2.000620] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.178610] fuse init (API version 7.9) [ 2.228921] fan PNP0C0B:00: registered as cooling_device0 [ 2.228936] ACPI: Fan [FAN] (on) [ 2.255630] processor ACPI0007:00: registered as cooling_device1 [ 2.255713] processor ACPI0007:01: registered as cooling_device2 [ 2.258612] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.259103] ACPI: Thermal Zone [THRM] (40 C) [ 2.707556] usbcore: registered new interface driver usbfs [ 2.707591] usbcore: registered new interface driver hub [ 2.707651] usbcore: registered new device driver usb [ 2.709705] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.710292] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 2.710302] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 2.710315] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.710318] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.710372] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.710409] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd8004000 [ 2.718268] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 2.738050] No dock devices found. [ 2.772197] usb usb1: configuration #1 chosen from 1 choice [ 2.772237] hub 1-0:1.0: USB hub found [ 2.772248] hub 1-0:1.0: 10 ports detected [ 2.772618] SCSI subsystem initialized [ 2.797613] libata version 3.00 loaded. [ 2.991077] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 2.991098] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 2.991118] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 2.991124] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.991171] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 2.991243] ehci_hcd 0000:00:02.1: debug port 1 [ 2.991255] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 2.991293] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 [ 3.170046] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 3.192699] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.192867] usb usb2: configuration #1 chosen from 1 choice [ 3.192903] hub 2-0:1.0: USB hub found [ 3.192914] hub 2-0:1.0: 10 ports detected [ 3.250050] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 3.413117] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 3.413606] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 3.413618] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21 [ 3.413623] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 3.413654] nv_probe: set workaround bit for reversed mac addr [ 3.940507] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:13:d4:82:f2:ba [ 3.940512] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 [ 3.954478] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 3.955105] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 3.955117] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 3.955134] pata_acpi 0000:00:07.0: setting latency timer to 64 [ 3.955144] pata_acpi 0000:00:07.0: PCI INT A disabled [ 3.955693] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 3.955696] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 3.955713] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 3.955721] pata_acpi 0000:00:08.0: PCI INT A disabled [ 3.962010] sata_nv 0000:00:07.0: version 3.5 [ 3.962027] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 3.962079] sata_nv 0000:00:07.0: setting latency timer to 64 [ 3.964383] scsi0 : sata_nv [ 3.965424] scsi1 : sata_nv [ 3.965669] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20 [ 3.965673] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20 [ 4.190037] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 4.345604] usb 2-4: configuration #1 chosen from 1 choice [ 4.470033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.490305] ata1.00: ATA-7: Hitachi HDS721010KLA330, GKAOAB0A, max UDMA/133 [ 4.490309] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 4.530292] ata1.00: configured for UDMA/133 [ 4.880023] ata2: SATA link down (SStatus 0 SControl 300) [ 4.880145] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72101 GKAO PQ: 0 ANSI: 5 [ 4.880277] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 4.880319] sata_nv 0000:00:08.0: setting latency timer to 64 [ 4.881800] scsi2 : sata_nv [ 4.882819] scsi3 : sata_nv [ 4.883070] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23 [ 4.883073] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23 [ 4.902524] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 5.140177] usb 1-2: configuration #1 chosen from 1 choice [ 5.392528] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.421689] ata3.00: ATA-7: WDC WD3200AAKS-00VYA0, 12.01B01, max UDMA/133 [ 5.421692] ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 5.460364] ata3.00: configured for UDMA/133 [ 5.480037] usb 1-3: new full speed USB device using ohci_hcd and address 4 [ 5.712200] usb 1-3: configuration #1 chosen from 1 choice [ 5.970032] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.993591] ata4.00: ATA-7: Maxtor 6B200S0, BANC1E00, max UDMA/133 [ 5.993594] ata4.00: 398297088 sectors, multi 0: LBA48 NCQ (not used) [ 6.031054] ata4.00: configured for UDMA/133 [ 6.031176] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 6.032927] scsi 3:0:0:0: Direct-Access ATA Maxtor 6B200S0 BANC PQ: 0 ANSI: 5 [ 6.033208] pata_amd 0000:00:06.0: version 0.3.10 [ 6.033250] pata_amd 0000:00:06.0: setting latency timer to 64 [ 6.033342] scsi4 : pata_amd [ 6.033472] scsi5 : pata_amd [ 6.034554] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 6.034557] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 6.052525] usb 1-8: new low speed USB device using ohci_hcd and address 5 [ 6.420257] ata5.00: ATAPI: ATAPI DVD A DH20A4H, QP53, max UDMA/66 [ 6.420272] ata5.01: ATAPI: TDK CDRW401240B, Z7SB, max UDMA/33 [ 6.420285] ata5: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [ 6.420289] ata5.00: limited to UDMA/33 due to 40-wire cable [ 6.420293] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [ 6.450192] ata5.00: configured for UDMA/33 [ 6.490189] ata5.01: configured for UDMA/33 [ 6.531179] usb 1-8: configuration #1 chosen from 1 choice [ 6.542212] usbcore: registered new interface driver hiddev [ 6.551489] input: Microsoft Microsoft IntelliMouse® Optical as /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/input/input2 [ 6.620154] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:02.0-2 [ 6.672000] scsi 4:0:0:0: CD-ROM ATAPI DVD A DH20A4H QP53 PQ: 0 ANSI: 5 [ 6.673961] scsi 4:0:1:0: CD-ROM TDK CDRW401240B Z7SB PQ: 0 ANSI: 5 [ 6.683693] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.683738] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 6.683779] scsi 3:0:0:0: Attached scsi generic sg2 type 0 [ 6.683821] scsi 4:0:0:0: Attached scsi generic sg3 type 5 [ 6.683863] scsi 4:0:1:0: Attached scsi generic sg4 type 5 [ 6.708147] Driver 'sd' needs updating - please use bus_type methods [ 6.708285] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) [ 6.708315] sd 0:0:0:0: [sda] Write Protect is off [ 6.708318] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.708368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.708462] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) [ 6.708488] sd 0:0:0:0: [sda] Write Protect is off [ 6.708491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.708539] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.708543] sda: sda1 sda2 sda3 [ 6.720353] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.720484] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 6.720516] sd 2:0:0:0: [sdb] Write Protect is off [ 6.720519] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.720575] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.720668] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 6.720698] sd 2:0:0:0: [sdb] Write Protect is off [ 6.720700] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.720755] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.720759] sdb: sdb1 sdb2 [ 6.724674] sd 2:0:0:0: [sdb] Attached SCSI disk [ 6.724773] sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB) [ 6.724800] sd 3:0:0:0: [sdc] Write Protect is off [ 6.724803] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.724851] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.724930] sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB) [ 6.724956] sd 3:0:0:0: [sdc] Write Protect is off [ 6.724958] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.725006] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.725010] sdc:<4>Driver 'sr' needs updating - please use bus_type methods [ 6.744146] sdc1 sdc2 sdc3 sdc4 [ 6.748092] sd 3:0:0:0: [sdc] Attached SCSI disk [ 6.770131] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.770137] Uniform CD-ROM driver Revision: 3.20 [ 6.770255] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 6.793999] sr1: scsi3-mmc drive: 12x/48x writer cd/rw xa/form2 cdda tray [ 6.794125] sr 4:0:1:0: Attached scsi CD-ROM sr1 [ 7.957224] hiddev96hidraw1: USB HID v1.10 Device [Tripp Lite TRIPP LITE UPS ] on usb-0000:00:02.0-8 [ 7.957248] usbcore: registered new interface driver usbhid [ 7.957252] usbhid: v2.6:USB HID core driver [ 8.014935] PM: Starting manual resume from disk [ 8.014939] PM: Resume from partition 8:2 [ 8.014941] PM: Checking hibernation image. [ 8.015059] PM: Resume from disk failed. [ 8.024238] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 8.031207] SGI XFS Quota Management subsystem [ 8.050324] XFS mounting filesystem sda3 [ 8.172369] Ending clean XFS mount for filesystem: sda3 [ 12.885980] udevd version 124 started [ 13.290525] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 13.370049] ACPI: Power Button (FF) [PWRF] [ 13.370155] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 13.386970] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 13.387001] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 13.440050] ACPI: Power Button (CM) [PWRB] [ 13.503441] parport_pc 00:09: reported by Plug and Play ACPI [ 13.503495] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 13.901777] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 13.901783] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 13.901805] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 14.250030] intel8x0_measure_ac97_clock: measured 60672 usecs [ 14.250034] intel8x0: clocking to 46972 [ 14.299082] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0021 [ 14.432897] usbcore: registered new interface driver snd-usb-audio [ 14.433498] usbcore: registered new interface driver usblp [ 14.539205] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 14.542356] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.637268] Linux video capture interface: v2.00 [ 14.684644] cx18: Start initialization, version 1.0.0 [ 14.684694] cx18-0: Initializing card #0 [ 14.684698] cx18-0: Autodetected Hauppauge card [ 14.685055] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 14.685065] cx18 0000:05:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 14.685073] cx18-0: Unreasonably low latency timer, setting to 64 (was 32) [ 14.688492] cx18-0: cx23418 revision 01010000 (B) [ 14.859844] tveeprom 2-0050: Hauppauge model 74541, rev C6B6, serial# 3326793 [ 14.859849] tveeprom 2-0050: MAC address is 00-0D-FE-32-C3-49 [ 14.859852] tveeprom 2-0050: tuner model is Philips FM1236 MK5 (idx 116, type 43) [ 14.859856] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) [ 14.859859] tveeprom 2-0050: audio processor is CX23418 (idx 38) [ 14.859861] tveeprom 2-0050: decoder processor is CX23418 (idx 31) [ 14.859864] tveeprom 2-0050: has radio [ 14.859866] cx18-0: Autodetected Hauppauge HVR-1600 [ 14.859868] cx18-0: VBI is not yet supported [ 15.473405] nvidia: module license 'NVIDIA' taints kernel. [ 15.730413] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 15.821186] tuner 3-0043: chip found @ 0x86 (cx18 i2c driver #0-1) [ 15.842393] tda9887 3-0043: creating new instance [ 15.842397] tda9887 3-0043: tda988[5/6/7] found [ 15.843589] tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) [ 15.843693] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 15.868165] tuner-simple 3-0061: creating new instance [ 15.868171] tuner-simple 3-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) [ 15.870130] cx18-0: Disabled encoder IDX device [ 15.870286] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 15.870290] DVB: registering new adapter (cx18) [ 15.974032] MXL5005S: Attached at address 0x63 [ 15.974039] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... [ 15.974217] cx18-0: DVB Frontend registered [ 15.974264] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 15.974306] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 15.974348] cx18-0: Registered device radio0 for encoder radio [ 15.974351] cx18-0: Initialized card #0: Hauppauge HVR-1600 [ 15.974382] cx18: End initialization [ 15.975723] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 15.975736] nvidia 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 15.975743] nvidia 0000:01:00.0: setting latency timer to 64 [ 15.975918] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008 [ 16.730813] NET: Registered protocol family 10 [ 16.731492] lo: Disabled Privacy Extensions [ 17.817755] lp0: using parport0 (interrupt-driven). [ 17.997926] Adding 3903784k swap on /dev/sda2. Priority:-1 extents:1 across:3903784k [ 18.026794] Adding 979956k swap on /dev/sdc2. Priority:-2 extents:1 across:979956k [ 24.038359] ReiserFS: sda1: found reiserfs format "3.6" with standard journal [ 24.038371] ReiserFS: sda1: using ordered data mode [ 24.038947] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 24.040291] ReiserFS: sda1: checking transaction log (sda1) [ 24.055161] ReiserFS: sda1: Using r5 hash to sort names [ 24.312280] type=1505 audit(1226544847.595:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4431 [ 24.489640] type=1505 audit(1226544847.765:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4436 [ 24.489868] type=1505 audit(1226544847.765:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4436 [ 24.560204] type=1505 audit(1226544847.845:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4440 [ 25.888862] NET: Registered protocol family 17 [ 27.351649] ACPI: WMI: Mapper loaded [ 27.367041] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 27.587085] powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 165 processors (2 cpu cores) (version 2.20.00) [ 27.587148] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x8 [ 27.587153] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 30.847414] /dev/vmmon[5348]: Module vmmon: registered with major=10 minor=165 [ 30.847434] /dev/vmmon[5348]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0 [ 30.847437] /dev/vmmon[5348]: Module vmmon: initialized [ 30.890534] /dev/vmci[5360]: VMCI: Driver initialized. [ 30.890654] /dev/vmci[5360]: Module vmci: registered with major=10 minor=60 [ 30.890657] /dev/vmci[5360]: Module vmci: initialized [ 31.405863] /dev/vmnet: open called by PID 5399 (vmnet-bridge) [ 31.405880] /dev/vmnet: hub 0 does not exist, allocating memory. [ 31.405895] /dev/vmnet: port on hub 0 successfully opened [ 31.405966] bridge-eth0: up [ 31.405970] bridge-eth0: attached [ 35.462522] eth0: no IPv6 routers present [ 39.627600] /dev/vmnet: open called by PID 6022 (vmnet-dhcpd) [ 39.627617] /dev/vmnet: hub 1 does not exist, allocating memory. [ 39.627630] /dev/vmnet: port on hub 1 successfully opened [ 39.677595] /dev/vmnet: open called by PID 6026 (vmnet-netifup) [ 39.677618] /dev/vmnet: port on hub 1 successfully opened [ 39.786357] /dev/vmnet: open called by PID 6029 (vmnet-dhcpd) [ 39.786375] /dev/vmnet: hub 8 does not exist, allocating memory. [ 39.786388] /dev/vmnet: port on hub 8 successfully opened [ 39.839879] /dev/vmnet: open called by PID 6031 (vmnet-natd) [ 39.839901] /dev/vmnet: port on hub 8 successfully opened [ 39.888226] /dev/vmnet: open called by PID 6035 (vmnet-netifup) [ 39.888252] /dev/vmnet: port on hub 8 successfully opened [ 40.510197] ppdev: user-space parallel port driver [ 49.780023] vmnet1: no IPv6 routers present [ 50.590096] vmnet8: no IPv6 routers present [ 74.912533] Clocksource tsc unstable (delta = -223207411 ns) [ 75.512582] firmware: requesting v4l-cx23418-apu.fw [ 75.646721] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) [ 76.140039] firmware: requesting v4l-cx23418-cpu.fw [ 76.194638] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes) [ 76.200798] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12) [ 76.402533] firmware: requesting v4l-cx23418-apu.fw [ 76.940039] firmware: requesting v4l-cx23418-cpu.fw [ 77.190034] firmware: requesting v4l-cx23418-dig.fw [ 77.376226] cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes) [ 185.802647] ppdev0: registered pardevice [ 185.842544] ppdev0: unregistered pardevice [ 562.515820] /dev/vmmon[8381]: PTSC: initialized at 1808448000 Hz using reference clock [ 589.817860] /dev/vmnet: open called by PID 8383 (vmware-vmx) [ 589.817917] device eth0 entered promiscuous mode [ 589.818040] bridge-eth0: enabled promiscuous mode [ 589.818045] /dev/vmnet: port on hub 0 successfully opened [ 609.712377] device eth0 left promiscuous mode [ 609.712519] bridge-eth0: disabled promiscuous mode [ 609.741375] vmmon: Had to deallocate locked 48763 pages from vm driver ffff880105495000 [ 609.744286] vmmon: Had to deallocate AWE 4662 pages from vm driver ffff880105495000 [ 2696.876788] hub 1-0:1.0: port 8 disabled by hub (EMI?), re-enabling... [ 2696.876806] usb 1-8: USB disconnect, address 5 [ 2697.210034] usb 1-8: new low speed USB device using ohci_hcd and address 6 [ 2697.695941] usb 1-8: configuration #1 chosen from 1 choice [ 2699.036911] hiddev96hidraw1: USB HID v1.10 Device [Tripp Lite TRIPP LITE UPS ] on usb-0000:00:02.0-8 [31766.254278] /dev/vmmon[11381]: PTSC: initialized at 1808448000 Hz using reference clock [31768.310542] /dev/vmnet: open called by PID 11383 (vmware-vmx) [31768.310574] device eth0 entered promiscuous mode [31768.310691] bridge-eth0: enabled promiscuous mode [31768.310694] /dev/vmnet: port on hub 0 successfully opened [35174.247668] device eth0 left promiscuous mode [35174.247802] bridge-eth0: disabled promiscuous mode [35174.310872] vmmon: Had to deallocate locked 149500 pages from vm driver ffff8801182f6400 [35174.316801] vmmon: Had to deallocate AWE 6303 pages from vm driver ffff8801182f6400 [35745.262655] ppdev0: registered pardevice [35745.302543] ppdev0: unregistered pardevice [37296.591222] compiz.real[12035] trap stack segment ip:41024e sp:7ffff5553390 error:0 [60682.635785] ppdev0: registered pardevice [60682.670046] ppdev0: unregistered pardevice [65497.250137] ppdev0: registered pardevice [65497.290039] ppdev0: unregistered pardevice [72531.790240] ppdev0: registered pardevice [72531.835606] ppdev0: unregistered pardevice [76180.896443] hub 1-0:1.0: port 8 disabled by hub (EMI?), re-enabling... [76180.896461] usb 1-8: USB disconnect, address 6 [76181.220044] usb 1-8: new low speed USB device using ohci_hcd and address 7 [76181.631627] usb 1-8: configuration #1 chosen from 1 choice [76181.645700] usb 1-8: can't set config #1, error -62 [76181.645971] hub 1-0:1.0: port 8 disabled by hub (EMI?), re-enabling... [76181.645978] usb 1-8: USB disconnect, address 7 [76181.982559] usb 1-8: new low speed USB device using ohci_hcd and address 8 [76182.464561] usb 1-8: configuration #1 chosen from 1 choice [76184.082548] hiddev96hidraw1: USB HID v1.10 Device [Tripp Lite TRIPP LITE UPS ] on usb-0000:00:02.0-8 [86639.562641] ppdev0: registered pardevice [86639.601192] ppdev0: unregistered pardevice [87625.365439] compiz.real[18838]: segfault at 10c0 ip 000000000041024e sp 00007fffd8dd0c10 error 4 in compiz.real[400000+3b000] [88379.018197] mythfrontend.re[19376]: segfault at 7f359afaff10 ip 00007f359afaff10 sp 00000000440b30d8 error 14 in libasound_module_rate_speexrate.so[7f359b1e7000+4000] [88503.970141] ppdev0: registered pardevice [88504.010036] ppdev0: unregistered pardevice [113785.551357] PPP generic driver version 2.4.2 [113787.081694] PPP MPPE Compression module registered [116135.945482] XFS mounting filesystem sdc4 [116136.095957] Ending clean XFS mount for filesystem: sdc4 [116874.564971] /dev/vmmon[26996]: PTSC: initialized at 1808448000 Hz using reference clock [116901.960598] /dev/vmnet: open called by PID 26998 (vmware-vmx) [116901.960642] device eth0 entered promiscuous mode [116901.960768] bridge-eth0: enabled promiscuous mode [116901.960773] /dev/vmnet: port on hub 0 successfully opened [117015.425084] device eth0 left promiscuous mode [117015.425289] bridge-eth0: disabled promiscuous mode [117015.493291] vmmon: Had to deallocate locked 119132 pages from vm driver ffff88003aaeb400 [117015.500966] vmmon: Had to deallocate AWE 5229 pages from vm driver ffff88003aaeb400 [118949.382671] ppdev0: registered pardevice [118949.422591] ppdev0: unregistered pardevice [121102.022665] ppdev0: registered pardevice [121102.062540] ppdev0: unregistered pardevice [124802.015739] ppdev0: registered pardevice [124802.050044] ppdev0: unregistered pardevice [124921.840868] compiz.real[30363]: segfault at 1 ip 000000000041024e sp 00007fffaffbbe00 error 4 in compiz.real[400000+3b000] [127511.260193] ppdev0: registered pardevice [127511.300038] ppdev0: unregistered pardevice [133160.013423] hub 1-0:1.0: port 8 disabled by hub (EMI?), re-enabling... [133160.013440] usb 1-8: USB disconnect, address 8 [133160.352529] usb 1-8: new low speed USB device using ohci_hcd and address 9 [133160.842590] usb 1-8: configuration #1 chosen from 1 choice [133162.191541] hiddev96hidraw1: USB HID v1.10 Device [Tripp Lite TRIPP LITE UPS ] on usb-0000:00:02.0-8 [141671.801093] hub 1-0:1.0: port 8 disabled by hub (EMI?), re-enabling... [141671.801110] usb 1-8: USB disconnect, address 9 [141672.142535] usb 1-8: new low speed USB device using ohci_hcd and address 10 [141672.628257] usb 1-8: configuration #1 chosen from 1 choice [141673.968217] hiddev96hidraw1: USB HID v1.10 Device [Tripp Lite TRIPP LITE UPS ] on usb-0000:00:02.0-8 [151439.390163] ppdev0: registered pardevice [151439.430043] ppdev0: unregistered pardevice [163549.100255] mythfrontend.re[1545]: segfault at 7fd749d99f10 ip 00007fd749d99f10 sp 00000000455a30d8 error 14 in libasound_module_rate_speexrate.so[7fd749fd1000+4000] [165387.772040] mythfrontend.re[1913]: segfault at 7f397c2d8f10 ip 00007f397c2d8f10 sp 00000000443620d8 error 14 in libasound_module_rate_speexrate.so[7f397c510000+4000] [166108.701011] mythfrontend.re[1969]: segfault at 7fe0083c1f10 ip 00007fe0083c1f10 sp 00000000443b50d8 error 14 in libasound_module_rate_speexrate.so[7fe0085f9000+4000] [190249.529564] hub 1-0:1.0: port 8 disabled by hub (EMI?), re-enabling... [190249.529581] usb 1-8: USB disconnect, address 10 [190249.872527] usb 1-8: new low speed USB device using ohci_hcd and address 11 [190250.354716] usb 1-8: configuration #1 chosen from 1 choice [190251.696681] hiddev96hidraw1: USB HID v1.10 Device [Tripp Lite TRIPP LITE UPS ] on usb-0000:00:02.0-8 [215432.815736] npviewer.bin[5391]: segfault at ff9d1e4c ip 00000000ff9d1e4c sp 00000000ffa99edc error 14 [218136.123494] mythfrontend.re[5462]: segfault at 7faef9086f10 ip 00007faef9086f10 sp 0000000043e540d8 error 14 in libasound_module_rate_speexrate.so[7faef92be000+4000] [218249.070210] ppdev0: registered pardevice [218249.110435] ppdev0: unregistered pardevice [225223.695654] compiz.real[5905] trap stack segment ip:41024e sp:7fffb33eddd0 error:0 [225360.140307] hub 1-0:1.0: port 8 disabled by hub (EMI?), re-enabling... [225360.140325] usb 1-8: USB disconnect, address 11 [225360.480035] usb 1-8: new low speed USB device using ohci_hcd and address 12 [225360.966467] usb 1-8: configuration #1 chosen from 1 choice [225362.298450] hiddev96hidraw1: USB HID v1.10 Device [Tripp Lite TRIPP LITE UPS ] on usb-0000:00:02.0-8 [229318.171915] mythfrontend.re[14571]: segfault at 7f453d863f10 ip 00007f453d863f10 sp 0000000043f340d8 error 14 in libasound_module_rate_speexrate.so[7f453da9b000+4000] [230259.967351] gksu[15495]: segfault at 1 ip 00007f3e2408b401 sp 00007fff2d33c690 error 4 in libgdk-x11-2.0.so.0.1400.4[7f3e2402c000+9b000] [232395.727506] /dev/vmmon[17527]: PTSC: initialized at 1808448000 Hz using reference clock [232426.195094] /dev/vmnet: open called by PID 17543 (vmware-vmx) [232426.195138] device eth0 entered promiscuous mode [232426.195269] bridge-eth0: enabled promiscuous mode [232426.195274] /dev/vmnet: port on hub 0 successfully opened [234072.759040] device eth0 left promiscuous mode [234072.759173] bridge-eth0: disabled promiscuous mode [234072.761717] /dev/vmnet: open called by PID 17543 (vmware-vmx) [234072.761749] device eth0 entered promiscuous mode [234072.761867] bridge-eth0: enabled promiscuous mode [234072.761871] /dev/vmnet: port on hub 0 successfully opened [234105.368530] device eth0 left promiscuous mode [234105.368661] bridge-eth0: disabled promiscuous mode [234105.368735] /dev/vmnet: open called by PID 17543 (vmware-vmx) [234105.368755] device eth0 entered promiscuous mode [234105.368872] bridge-eth0: enabled promiscuous mode [234105.368874] /dev/vmnet: port on hub 0 successfully opened [239464.899090] device eth0 left promiscuous mode [239464.899226] bridge-eth0: disabled promiscuous mode [239464.899346] /dev/vmnet: open called by PID 17543 (vmware-vmx) [239464.899375] device eth0 entered promiscuous mode [239464.899493] bridge-eth0: enabled promiscuous mode [239464.899498] /dev/vmnet: port on hub 0 successfully opened [239503.748594] device eth0 left promiscuous mode [239503.748721] bridge-eth0: disabled promiscuous mode [239503.750486] /dev/vmnet: open called by PID 17543 (vmware-vmx) [239503.750508] device eth0 entered promiscuous mode [239503.750623] bridge-eth0: enabled promiscuous mode [239503.750625] /dev/vmnet: port on hub 0 successfully opened [245267.660724] hub 1-0:1.0: port 8 disabled by hub (EMI?), re-enabling... [245267.660742] usb 1-8: USB disconnect, address 12 [245267.992988] usb 1-8: new low speed USB device using ohci_hcd and address 13 [245268.484925] usb 1-8: configuration #1 chosen from 1 choice [245269.824862] hiddev96hidraw1: USB HID v1.10 Device [Tripp Lite TRIPP LITE UPS ] on usb-0000:00:02.0-8 [250927.470156] device eth0 left promiscuous mode [250927.470285] bridge-eth0: disabled promiscuous mode [250927.706342] vmmon: Had to deallocate locked 432027 pages from vm driver ffff880057c02c00 [250927.711661] vmmon: Had to deallocate AWE 6272 pages from vm driver ffff880057c02c00 [250979.712146] /dev/vmmon[27873]: PTSC: initialized at 1808448000 Hz using reference clock [250986.926359] /dev/vmnet: open called by PID 27885 (vmware-vmx) [250986.926390] device eth0 entered promiscuous mode [250986.926507] bridge-eth0: enabled promiscuous mode [250986.926510] /dev/vmnet: port on hub 0 successfully opened [257742.762547] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [257742.762565] ata5.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in [257742.762567] cdb 4a 01 00 00 10 00 00 00 08 00 00 00 00 00 00 00 [257742.762568] res 40/00:02:00:08:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [257742.762572] ata5.00: status: { DRDY } [257742.762593] ata5: soft resetting link [257743.140291] ata5: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [257743.140303] ata5: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [257743.180237] ata5.00: configured for UDMA/33 [257743.220220] ata5.01: configured for UDMA/33 [257743.220242] ata5: EH complete [257773.222553] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [257773.222570] ata5.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [257773.222571] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [257773.222572] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [257773.222576] ata5.01: status: { DRDY } [257773.222598] ata5: soft resetting link [257773.600293] ata5: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [257773.600304] ata5: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [257773.640213] ata5.00: configured for UDMA/33 [257773.680222] ata5.01: configured for UDMA/33 [257773.680243] ata5: EH complete [257803.682554] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [257803.682571] ata5.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [257803.682573] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [257803.682574] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [257803.682578] ata5.01: status: { DRDY } [257803.682600] ata5: soft resetting link [257804.060305] ata5: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [257804.060316] ata5: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [257804.100231] ata5.00: configured for UDMA/33 [257804.140285] ata5.01: configured for UDMA/33 [257804.140306] ata5: EH complete [257834.142595] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [257834.142610] ata5.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [257834.142612] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [257834.142613] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [257834.142617] ata5.01: status: { DRDY } [257834.142638] ata5: soft resetting link [257834.520321] ata5: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [257834.520334] ata5: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [257834.560303] ata5.00: configured for UDMA/33 [257834.600313] ata5.01: configured for UDMA/33 [257834.600333] ata5: EH complete [257864.602555] ata5.01: limiting speed to UDMA/25:PIO4 [257864.602567] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [257864.602577] ata5.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [257864.602578] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [257864.602579] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [257864.602583] ata5.01: status: { DRDY } [257864.602605] ata5: soft resetting link [257864.980289] ata5: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [257864.980300] ata5: nv_mode_filter: 0x301f&0x701f->0x301f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [257865.020227] ata5.00: configured for UDMA/33 [257865.060209] ata5.01: configured for UDMA/25 [257865.060242] ata5: EH complete [257872.092547] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [257872.092564] ata5.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in [257872.092566] cdb 4a 01 00 00 10 00 00 00 08 00 00 00 00 00 00 00 [257872.092568] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [257872.092571] ata5.01: status: { DRDY } [257872.092593] ata5: soft resetting link [257872.470280] ata5: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [257872.470291] ata5: nv_mode_filter: 0x301f&0x701f->0x301f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [257872.510207] ata5.00: configured for UDMA/33 [257872.550215] ata5.01: configured for UDMA/25 [257872.550237] ata5: EH complete [257902.554311] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [257902.554328] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [257902.554329] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [257902.554331] res 40/00:02:00:08:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [257902.554334] ata5.00: status: { DRDY } [257902.554355] ata5: soft resetting link [257902.930306] ata5: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [257902.930318] ata5: nv_mode_filter: 0x301f&0x701f->0x301f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [257902.970224] ata5.00: configured for UDMA/33 [257903.010276] ata5.01: configured for UDMA/25 [257903.010296] ata5: EH complete [257933.042544] ata5.01: limiting speed to PIO4 [257933.042554] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [257933.042564] ata5.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [257933.042565] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [257933.042567] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [257933.042570] ata5.01: status: { DRDY } [257933.042591] ata5: soft resetting link [257933.420279] ata5: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [257933.420291] ata5: nv_mode_filter: 0x1f&0x701f->0x1f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [257933.460248] ata5.00: configured for UDMA/33 [257933.500225] ata5.01: configured for PIO4 [257933.500253] ata5: EH complete [257963.512546] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [257963.512564] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [257963.512565] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [257963.512567] res 40/00:02:00:08:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [257963.512570] ata5.00: status: { DRDY } [257963.512592] ata5: soft resetting link [257963.890343] ata5: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [257963.890355] ata5: nv_mode_filter: 0x1f&0x701f->0x1f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [257963.930410] ata5.00: configured for UDMA/33 [257963.970251] ata5.01: configured for PIO4 [257963.970272] ata5: EH complete