[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-3-generic (root@eddie) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu4) ) #1 SMP Mon Sep 8 22:51:51 UTC 2008 (Ubuntu 2.6.27-3.3smb5-generic) [ 0.000000] Command line: BOOT_IMAGE=(hd0,1)/vmlinuz-2.6.27-3-generic root=/dev/mapper/split-Ubuntu_root ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037f00000 (usable) [ 0.000000] BIOS-e820: 0000000037f00000 - 0000000037f17000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037f17000 - 0000000037f80000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037f80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x37f00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 0037e00000 page 2M [ 0.000000] 0037e00000 - 0037f00000 page 4k [ 0.000000] kernel direct mapping tables up to 37f00000 @ 8000-b000 [ 0.000000] last_map_addr: 37f00000 end: 37f00000 [ 0.000000] RAMDISK: 29641000 - 29f7f88f [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F87B0, 0024 (r3 HPQOEM) [ 0.000000] ACPI: XSDT 37F10032, 005C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 37F16AA6, 00F4 (r3 HPQOEM SLIC-MPC 6040000 PTL F4240) [ 0.000000] ACPI: DSDT 37F1008E, 6A18 (r1 HPQOEM SLIC-MPC 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 37F17FC0, 0040 [ 0.000000] ACPI: SLIC 37F16C0E, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1) [ 0.000000] ACPI: MCFG 37F16D84, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: HPET 37F16DC0, 0038 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: APIC 37F16DF8, 005E (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 37F16E56, 0028 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: SSDT 37F16E7E, 0182 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037f00000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037f00000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [0000000000009000 - 000000000000ffdf] pages 7 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037f00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008dc09c] TEXT DATA BSS ==> [0000200000 - 00008dc09c] [ 0.000000] #3 [0029641000 - 0029f7f88f] RAMDISK ==> [0029641000 - 0029f7f88f] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] found SMP MP-table at [ffff8800000f8780] 000f8780 [ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00037f00 [ 0.000000] On node 0 totalpages: 229021 [ 0.000000] DMA zone: 2073 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 221508 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 223581 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz-2.6.27-3-generic root=/dev/mapper/split-Ubuntu_root ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 1607.308 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ c110000000 size 32 MB [ 0.004000] Aperture beyond 4GB. Ignoring. [ 0.004000] Memory: 884980k/916480k available (3211k kernel code, 31104k reserved, 1605k data, 540k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.61 BogoMIPS (lpj=6429232) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 0/0 -> Node 0 [ 0.004000] tseg: 0037f80000 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using C1E aware idle routine [ 0.004000] ACPI: Core revision 20080609 [ 0.005927] ACPI: Checking initramfs for custom DSDT [ 0.516694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.557678] CPU0: AMD Turion(tm) 64 X2 stepping 02 [ 0.557684] Using local APIC timer interrupts. [ 0.560034] APIC timer calibration result 12557110 [ 0.560038] Detected 12.557 MHz APIC timer. [ 0.560239] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3214.71 BogoMIPS (lpj=6429421) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] System has C1E enabled [ 0.004000] Switch to broadcast mode on CPU1 [ 0.648271] CPU1: AMD Turion(tm) 64 X2 stepping 02 [ 0.648292] Brought up 2 CPUs [ 0.648295] Total of 2 processors activated (6429.32 BogoMIPS). [ 0.648395] CPU0 attaching sched-domain: [ 0.648400] domain 0: span 0-1 level CPU [ 0.648404] groups: 0 1 [ 0.648410] domain 1: span 0-1 level NODE [ 0.648414] groups: 0-1 [ 0.648422] CPU1 attaching sched-domain: [ 0.648425] domain 0: span 0-1 level CPU [ 0.648429] groups: 1 0 [ 0.648435] domain 1: span 0-1 level NODE [ 0.648439] groups: 0-1 [ 0.648560] Switch to broadcast mode on CPU0 [ 0.648560] net_namespace: 1552 bytes [ 0.648560] Booting paravirtualized kernel on bare hardware [ 0.648560] Time: 23:47:12 Date: 09/09/08 [ 0.648560] NET: Registered protocol family 16 [ 0.648560] node 0 link 0: io port [2000, fffff] [ 0.648560] TOM: 0000000040000000 aka 1024M [ 0.648560] node 0 link 0: mmio [e0000000, efffffff] [ 0.648560] node 0 link 0: mmio [a0000, bffff] [ 0.648560] node 0 link 0: mmio [40000000, fe0bffff] [ 0.648560] bus: [00,ff] on node 0 link 0 [ 0.648560] bus: 00 index 0 io port: [0, ffff] [ 0.648560] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 0.648560] bus: 00 index 2 mmio: [a0000, bffff] [ 0.648560] ACPI: bus type pci registered [ 0.648560] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4 [ 0.648560] PCI: MCFG area at e0000000 reserved in E820 [ 0.652101] PCI: Using MMCONFIG at e0000000 - e04fffff [ 0.652112] PCI: Using configuration type 1 for base access [ 0.659458] ACPI: EC: Look up EC in DSDT [ 0.680904] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.683779] ACPI: Interpreter enabled [ 0.683789] ACPI: (supports S0 S3 S4 S5) [ 0.683863] ACPI: Using IOAPIC for interrupt routing [ 0.684178] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.684178] ACPI: EC: GPE storm detected, disabling EC GPE [ 1.312781] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62 [ 1.312781] ACPI: EC: driver started in poll mode [ 1.316100] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.316657] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.316673] pci 0000:00:02.0: PME# disabled [ 1.316751] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.316766] pci 0000:00:03.0: PME# disabled [ 1.317204] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 1.317221] pci 0000:00:0a.1: PME# disabled [ 1.317453] pci 0000:00:0b.0: supports D1 [ 1.317462] pci 0000:00:0b.0: supports D2 [ 1.317471] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.317488] pci 0000:00:0b.0: PME# disabled [ 1.317599] pci 0000:00:0b.1: supports D1 [ 1.317608] pci 0000:00:0b.1: supports D2 [ 1.317617] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.317633] pci 0000:00:0b.1: PME# disabled [ 1.318027] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 1.318042] pci 0000:00:10.1: PME# disabled [ 1.318149] pci 0000:00:14.0: supports D1 [ 1.318158] pci 0000:00:14.0: supports D2 [ 1.318167] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.318183] pci 0000:00:14.0: PME# disabled [ 1.318542] pci 0000:01:00.0: supports D1 [ 1.318551] pci 0000:01:00.0: supports D2 [ 1.318625] PCI: bridge 0000:00:02.0 32bit mmio: [b3000000, b30fffff] [ 1.318715] PCI: bridge 0000:00:03.0 io port: [4000, 4fff] [ 1.318729] PCI: bridge 0000:00:03.0 32bit mmio: [b4000000, b7ffffff] [ 1.318746] PCI: bridge 0000:00:03.0 64bit mmio pref: [d0000000, d01fffff] [ 1.318880] pci 0000:05:09.0: supports D1 [ 1.318889] pci 0000:05:09.0: supports D2 [ 1.318899] pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.318915] pci 0000:05:09.0: PME# disabled [ 1.319019] pci 0000:05:09.1: supports D1 [ 1.319028] pci 0000:05:09.1: supports D2 [ 1.319038] pci 0000:05:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.319054] pci 0000:05:09.1: PME# disabled [ 1.319158] pci 0000:05:09.2: supports D1 [ 1.319167] pci 0000:05:09.2: supports D2 [ 1.319177] pci 0000:05:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.319193] pci 0000:05:09.2: PME# disabled [ 1.319299] pci 0000:05:09.3: supports D1 [ 1.319308] pci 0000:05:09.3: supports D2 [ 1.319318] pci 0000:05:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.319334] pci 0000:05:09.3: PME# disabled [ 1.319392] pci 0000:00:10.0: transparent bridge [ 1.319407] PCI: bridge 0000:00:10.0 32bit mmio: [b8000000, b80fffff] [ 1.319454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.320272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 1.320516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 1.320713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 3.017558] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 22 23) *0, disabled. [ 3.017558] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 22 23) *10 [ 3.017558] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 *10 11 14 15) [ 3.017558] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 3.017558] ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled. [ 3.017789] ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *11 [ 3.020255] ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10 [ 3.020538] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 22 23) *0, disabled. [ 3.020823] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 22 23) *10 [ 3.021108] ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 22 23) *11 [ 3.021393] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 22 23) *11 [ 3.021678] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 22 23) *7 [ 3.021963] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 22 23) *11 [ 3.022248] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 22 23) *0, disabled. [ 3.022548] ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 22 23) *0, disabled. [ 3.022834] ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 22 23) *0, disabled. [ 3.023120] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 22 23) *0, disabled. [ 3.023416] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 22 23) *5 [ 3.023701] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 22 23) *0 [ 3.023772] Linux Plug and Play Support v0.97 (c) Adam Belay [ 3.024040] pnp: PnP ACPI init [ 3.024050] ACPI: bus type pnp registered [ 3.057332] pnp: PnP ACPI: found 11 devices [ 3.057336] ACPI: ACPI bus type pnp unregistered [ 3.057364] PCI: Using ACPI for IRQ routing [ 3.068068] NET: Registered protocol family 8 [ 3.068071] NET: Registered protocol family 20 [ 3.068092] NetLabel: Initializing [ 3.068092] NetLabel: domain hash size = 128 [ 3.068092] NetLabel: protocols = UNLABELED CIPSOv4 [ 3.068092] NetLabel: unlabeled traffic allowed by default [ 3.068235] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 3.068235] hpet0: 3 32-bit timers, 25000000 Hz [ 3.070620] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 3.070623] actual entries 65586 [ 3.070756] AppArmor: AppArmor Filesystem Enabled [ 3.070792] ACPI: RTC can wake from S4 [ 3.072064] Switched to high resolution mode on CPU 0 [ 3.072075] Switched to high resolution mode on CPU 1 [ 3.080080] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 3.080090] system 00:02: ioport range 0x1000-0x107f has been reserved [ 3.080094] system 00:02: ioport range 0x1080-0x10ff has been reserved [ 3.080097] system 00:02: ioport range 0x1400-0x147f has been reserved [ 3.080101] system 00:02: ioport range 0x1480-0x14ff has been reserved [ 3.080104] system 00:02: ioport range 0x1800-0x187f has been reserved [ 3.080108] system 00:02: ioport range 0x1880-0x18ff has been reserved [ 3.080111] system 00:02: ioport range 0x2000-0x203f has been reserved [ 3.080121] system 00:03: ioport range 0x360-0x361 has been reserved [ 3.080125] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 3.081447] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 3.081450] pci 0000:00:02.0: IO window: disabled [ 3.081455] pci 0000:00:02.0: MEM window: 0xb3000000-0xb30fffff [ 3.081458] pci 0000:00:02.0: PREFETCH window: disabled [ 3.081463] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 3.081466] pci 0000:00:03.0: IO window: 0x4000-0x4fff [ 3.081470] pci 0000:00:03.0: MEM window: 0xb4000000-0xb7ffffff [ 3.081474] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 3.081479] pci 0000:00:10.0: PCI bridge, secondary bus 0000:05 [ 3.081482] pci 0000:00:10.0: IO window: disabled [ 3.081486] pci 0000:00:10.0: MEM window: 0xb8000000-0xb80fffff [ 3.081490] pci 0000:00:10.0: PREFETCH window: disabled [ 3.081505] pci 0000:00:02.0: setting latency timer to 64 [ 3.081513] pci 0000:00:03.0: setting latency timer to 64 [ 3.081520] pci 0000:00:10.0: setting latency timer to 64 [ 3.081524] bus: 00 index 0 io port: [0, ffff] [ 3.081526] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 3.081529] bus: 01 index 0 mmio: [0, 0] [ 3.081531] bus: 01 index 1 mmio: [b3000000, b30fffff] [ 3.081534] bus: 01 index 2 mmio: [0, 0] [ 3.081536] bus: 01 index 3 mmio: [0, 0] [ 3.081539] bus: 03 index 0 io port: [4000, 4fff] [ 3.081541] bus: 03 index 1 mmio: [b4000000, b7ffffff] [ 3.081544] bus: 03 index 2 mmio: [d0000000, d01fffff] [ 3.081546] bus: 03 index 3 mmio: [0, 0] [ 3.081548] bus: 05 index 0 mmio: [0, 0] [ 3.081551] bus: 05 index 1 mmio: [b8000000, b80fffff] [ 3.081554] bus: 05 index 2 mmio: [0, 0] [ 3.081556] bus: 05 index 3 io port: [0, ffff] [ 3.081558] bus: 05 index 4 mmio: [0, ffffffffffffffff] [ 3.081574] NET: Registered protocol family 2 [ 3.116168] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 3.116866] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 3.118540] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.119285] TCP: Hash tables configured (established 131072 bind 65536) [ 3.119290] TCP reno registered [ 3.128169] NET: Registered protocol family 1 [ 3.128347] checking if image is initramfs... it is [ 4.332989] Freeing initrd memory: 9466k freed [ 4.339614] Simple Boot Flag at 0x36 set to 0x1 [ 4.341160] audit: initializing netlink socket (disabled) [ 4.341178] type=2000 audit(1221004035.340:1): initialized [ 4.348533] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.352361] VFS: Disk quotas dquot_6.5.1 [ 4.352488] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.352639] msgmni has been set to 1746 [ 4.352826] io scheduler noop registered [ 4.352829] io scheduler anticipatory registered [ 4.352831] io scheduler deadline registered [ 4.353019] io scheduler cfq registered (default) [ 4.353038] pci 0000:00:00.0: Enabling HT MSI Mapping [ 4.353090] pci 0000:00:02.0: Enabling HT MSI Mapping [ 4.353102] pci 0000:00:03.0: Enabling HT MSI Mapping [ 4.353113] pci 0000:00:05.0: Boot video device [ 4.353137] pci 0000:00:09.0: Enabling HT MSI Mapping [ 4.568098] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 4.568111] pci 0000:00:10.0: Enabling HT MSI Mapping [ 4.568126] pci 0000:00:10.1: Enabling HT MSI Mapping [ 4.568327] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 4.568355] pcieport-driver 0000:00:02.0: found MSI capability [ 4.568385] pci_express 0000:00:02.0:pcie00: allocate port service [ 4.568458] pci_express 0000:00:02.0:pcie03: allocate port service [ 4.568568] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 4.568594] pcieport-driver 0000:00:03.0: found MSI capability [ 4.568615] pci_express 0000:00:03.0:pcie00: allocate port service [ 4.568682] pci_express 0000:00:03.0:pcie03: allocate port service [ 4.615027] hpet_resources: 0xfed00000 is busy [ 4.615166] Linux agpgart interface v0.103 [ 4.615170] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 4.618667] brd: module loaded [ 4.618781] input: Macintosh mouse button emulation as /class/input/input0 [ 4.618960] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.619392] i8042.c: Detected active multiplexing controller, rev 1.1. [ 4.619486] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.619495] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.619498] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.619501] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.619504] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.633491] mice: PS/2 mouse device common for all mice [ 4.633716] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 4.633757] rtc0: alarms up to one year, y3k, hpet irqs [ 4.633829] cpuidle: using governor ladder [ 4.633832] cpuidle: using governor menu [ 4.634497] aufs 20080609 [ 4.635321] registered taskstats version 1 [ 4.635539] Magic number: 8:371:807 [ 4.635628] tty ptys1: hash matches [ 4.635649] misc snapshot: hash matches [ 4.635719] rtc_cmos 00:06: setting system clock to 2008-09-09 23:47:15 UTC (1221004035) [ 4.635724] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.635726] EDD information not available. [ 4.635785] Freeing unused kernel memory: 540k freed [ 4.636054] Write protecting the kernel read-only data: 1276k [ 4.638025] input: AT Translated Set 2 keyboard as /class/input/input1 [ 4.745698] compcache: Compressed swap size set to: 223748 KB [ 4.746481] TLSF: pool: ffffc200001f1000, init_size=16384, max_size=0, grow_size=16384 [ 4.876147] fuse init (API version 7.9) [ 4.966619] uvesafb: failed to execute /sbin/v86d [ 4.966623] uvesafb: make sure that the v86d helper is installed and executable [ 4.966626] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 4.966630] uvesafb: vbe_init() failed with -22 [ 4.966640] uvesafb: probe of uvesafb.0 failed with error -22 [ 5.123150] processor ACPI0007:00: registered as cooling_device0 [ 5.123158] ACPI: Processor [CPU0] (supports 8 throttling states) [ 5.123322] processor ACPI0007:01: registered as cooling_device1 [ 5.123329] ACPI: Processor [CPU1] (supports 8 throttling states) [ 5.376394] thermal LNXTHERM:01: registered as thermal_zone0 [ 5.568188] ACPI: Thermal Zone [TZS0] (57 C) [ 5.672294] thermal LNXTHERM:02: registered as thermal_zone1 [ 5.736158] ACPI: Thermal Zone [TZS1] (60 C) [ 5.757161] device-mapper: uevent: version 1.0.3 [ 5.757463] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.843745] Adding 223744k swap on /dev/ramzswap0. Priority:100 extents:1 across:223744k [ 6.906885] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19 [ 6.906900] b43-pci-bridge 0000:01:00.0: PCI INT A -> Link[LK2E] -> GSI 19 (level, high) -> IRQ 19 [ 6.906912] b43-pci-bridge 0000:01:00.0: setting latency timer to 64 [ 6.947510] No dock devices found. [ 6.967594] usbcore: registered new interface driver usbfs [ 6.967633] usbcore: registered new interface driver hub [ 6.967692] usbcore: registered new device driver usb [ 6.969097] ssb: Sonics Silicon Backplane found on PCI device 0000:01:00.0 [ 6.982769] SCSI subsystem initialized [ 7.024134] libata version 3.00 loaded. [ 7.031054] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 7.031100] pata_acpi 0000:00:0e.0: enabling device (0005 -> 0007) [ 7.031614] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 7.031627] pata_acpi 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 7.031667] pata_acpi 0000:00:0e.0: setting latency timer to 64 [ 7.031815] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 7.051748] pata_amd 0000:00:0d.0: version 0.3.10 [ 7.051809] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 7.054280] scsi0 : pata_amd [ 7.063165] scsi1 : pata_amd [ 7.064220] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 7.064224] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 7.064501] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.404370] ata2.00: ATAPI: SONY DVD RW DW-G520A, GPSD, max MWDMA2 [ 7.404393] ata2: nv_mode_filter: 0x39f&0x7001->0x1, BIOS=0x0 (0x0) ACPI=0x7001 (60:600:0x11) [ 7.436357] ata2.00: configured for PIO0 [ 7.436428] isa bounce pool size: 16 pages [ 7.437534] scsi 1:0:0:0: CD-ROM SONY DVD RW DW-G520A GPSD PQ: 0 ANSI: 5 [ 7.438860] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 7.438873] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 [ 7.438888] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 7.438893] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 7.438958] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 7.438996] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 [ 7.452522] Driver 'sr' needs updating - please use bus_type methods [ 7.455517] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.455524] Uniform CD-ROM driver Revision: 3.20 [ 7.455632] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.463156] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 7.495276] usb usb1: configuration #1 chosen from 1 choice [ 7.495332] hub 1-0:1.0: USB hub found [ 7.495351] hub 1-0:1.0: 8 ports detected [ 7.702517] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 18 [ 7.702532] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 18 (level, high) -> IRQ 18 [ 7.702546] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 7.702550] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 7.702587] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 7.702636] ehci_hcd 0000:00:0b.1: debug port 1 [ 7.702642] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 7.702665] ehci_hcd 0000:00:0b.1: irq 18, io mem 0xb0005000 [ 7.880054] usb 1-8: new full speed USB device using ohci_hcd and address 2 [ 7.889047] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.890014] usb usb2: configuration #1 chosen from 1 choice [ 7.890702] hub 2-0:1.0: USB hub found [ 7.890718] hub 2-0:1.0: 8 ports detected [ 7.944072] hub 1-0:1.0: unable to enumerate USB device on port 8 [ 8.064936] end_request: I/O error, dev sr0, sector 416128 [ 8.064943] Buffer I/O error on device sr0, logical block 104032 [ 8.097696] sata_nv 0000:00:0e.0: version 3.5 [ 8.097710] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 8.097714] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 8.097760] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 8.097938] scsi2 : sata_nv [ 8.098677] scsi3 : sata_nv [ 8.098914] ata3: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 23 [ 8.098918] ata4: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 23 [ 8.208046] usb 2-8: new high speed USB device using ehci_hcd and address 2 [ 8.265824] end_request: I/O error, dev sr0, sector 416132 [ 8.265831] Buffer I/O error on device sr0, logical block 104033 [ 8.352123] usb 2-8: configuration #1 chosen from 1 choice [ 8.447700] end_request: I/O error, dev sr0, sector 416128 [ 8.447707] Buffer I/O error on device sr0, logical block 104032 [ 8.447712] Buffer I/O error on device sr0, logical block 104033 [ 8.655547] end_request: I/O error, dev sr0, sector 416240 [ 8.655551] Buffer I/O error on device sr0, logical block 104060 [ 8.684073] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.692246] ata3.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7BP, max UDMA/100 [ 8.692250] ata3.00: 312581808 sectors, multi 16: LBA48 [ 8.692259] ata3.00: Drive reports diagnostics failure. This may indicate a drive [ 8.692262] ata3.00: fault or invalid emulation. Contact drive vendor for information. [ 8.708238] ata3.00: configured for UDMA/100 [ 8.833714] end_request: I/O error, dev sr0, sector 416244 [ 8.833717] Buffer I/O error on device sr0, logical block 104061 [ 9.026394] end_request: I/O error, dev sr0, sector 416240 [ 9.026401] Buffer I/O error on device sr0, logical block 104060 [ 9.026405] Buffer I/O error on device sr0, logical block 104061 [ 9.038729] ata4: SATA link down (SStatus 0 SControl 300) [ 9.038852] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 9.039045] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 9.039224] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 9.039755] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17 [ 9.039767] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 17 (level, high) -> IRQ 17 [ 9.039773] forcedeth 0000:00:14.0: setting latency timer to 64 [ 9.496000] end_request: I/O error, dev sr0, sector 416256 [ 9.496007] Buffer I/O error on device sr0, logical block 104064 [ 9.556598] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:d3:1d:41:61 [ 9.556603] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 [ 9.557800] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 16 [ 9.557813] ohci1394 0000:05:09.0: PCI INT A -> Link[LNK1] -> GSI 16 (level, high) -> IRQ 16 [ 9.608594] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[b8000000-b80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 9.628168] Driver 'sd' needs updating - please use bus_type methods [ 9.628308] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 9.628337] sd 2:0:0:0: [sda] Write Protect is off [ 9.628340] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.628381] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.628476] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 9.628498] sd 2:0:0:0: [sda] Write Protect is off [ 9.628501] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.628541] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.628546] sda:<3>end_request: I/O error, dev sr0, sector 416256 [ 9.662623] Buffer I/O error on device sr0, logical block 104064 [ 9.810106] end_request: I/O error, dev sr0, sector 416256 [ 9.980964] end_request: I/O error, dev sr0, sector 416256 [ 10.041301] sda1 sda2 [ 10.041486] sd 2:0:0:0: [sda] Attached SCSI disk [ 10.113370] end_request: I/O error, dev sr0, sector 416256 [ 10.249186] end_request: I/O error, dev sr0, sector 416256 [ 10.470405] end_request: I/O error, dev sr0, sector 416256 [ 10.599298] end_request: I/O error, dev sr0, sector 416192 [ 10.830827] end_request: I/O error, dev sr0, sector 416248 [ 10.886520] ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a005b2d5003] [ 10.990853] end_request: I/O error, dev sr0, sector 416252 [ 11.131910] end_request: I/O error, dev sr0, sector 416256 [ 11.270823] end_request: I/O error, dev sr0, sector 416256 [ 11.498855] PM: Starting manual resume from disk [ 11.498858] PM: Resume from partition 253:1 [ 11.498860] PM: Checking hibernation image. [ 11.499823] PM: Resume from disk failed. [ 11.557033] kjournald starting. Commit interval 5 seconds [ 11.557057] EXT3-fs: mounted filesystem with ordered data mode. [ 21.034407] udevd version 124 started [ 21.575449] end_request: I/O error, dev sr0, sector 416128 [ 21.575455] __ratelimit: 11 callbacks suppressed [ 21.575459] Buffer I/O error on device sr0, logical block 104032 [ 21.670106] end_request: I/O error, dev sr0, sector 416132 [ 21.670114] Buffer I/O error on device sr0, logical block 104033 [ 21.768092] end_request: I/O error, dev sr0, sector 416128 [ 21.768099] Buffer I/O error on device sr0, logical block 104032 [ 21.768104] Buffer I/O error on device sr0, logical block 104033 [ 21.865372] end_request: I/O error, dev sr0, sector 416240 [ 21.865380] Buffer I/O error on device sr0, logical block 104060 [ 21.965189] end_request: I/O error, dev sr0, sector 416244 [ 21.965196] Buffer I/O error on device sr0, logical block 104061 [ 22.062773] end_request: I/O error, dev sr0, sector 416240 [ 22.062781] Buffer I/O error on device sr0, logical block 104060 [ 22.062786] Buffer I/O error on device sr0, logical block 104061 [ 22.398944] end_request: I/O error, dev sr0, sector 416256 [ 22.398952] Buffer I/O error on device sr0, logical block 104064 [ 22.497341] end_request: I/O error, dev sr0, sector 416256 [ 22.497349] Buffer I/O error on device sr0, logical block 104064 [ 22.595610] end_request: I/O error, dev sr0, sector 416256 [ 22.694030] end_request: I/O error, dev sr0, sector 416256 [ 22.792431] end_request: I/O error, dev sr0, sector 416256 [ 22.792840] input: Power Button (FF) as /class/input/input2 [ 22.828175] ACPI: Power Button (FF) [PWRF] [ 22.828281] input: Lid Switch as /class/input/input3 [ 22.880143] ACPI: Lid Switch [LID0] [ 22.880289] input: Sleep Button (CM) as /class/input/input4 [ 22.890833] end_request: I/O error, dev sr0, sector 416256 [ 22.928177] ACPI: Sleep Button (CM) [SLPB] [ 22.928255] input: Power Button (CM) as /class/input/input5 [ 22.984223] ACPI: Power Button (CM) [PWRB] [ 22.993923] end_request: I/O error, dev sr0, sector 416256 [ 23.016240] ACPI: WMI: Mapper loaded [ 23.091300] end_request: I/O error, dev sr0, sector 416192 [ 23.263853] end_request: I/O error, dev sr0, sector 416248 [ 23.357143] end_request: I/O error, dev sr0, sector 416252 [ 23.456172] end_request: I/O error, dev sr0, sector 416256 [ 23.591225] end_request: I/O error, dev sr0, sector 416256 [ 24.091198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 24.133524] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.248227] ACPI: AC Adapter [ADP1] (off-line) [ 24.704645] acpi device:03: registered as cooling_device2 [ 24.704925] input: Video Bus as /class/input/input6 [ 24.760188] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 24.920608] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 24.920642] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 25.382170] sdhci: Secure Digital Host Controller Interface driver [ 25.382174] sdhci: Copyright(c) Pierre Ossman [ 25.596328] sdhci-pci 0000:05:09.1: SDHCI controller found [1180:0822] (rev 19) [ 25.596911] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 23 [ 25.596916] sdhci-pci 0000:05:09.1: PCI INT B -> Link[LNK2] -> GSI 23 (level, high) -> IRQ 23 [ 25.600012] mmc0: SDHCI controller on PCI [0000:05:09.1] using PIO [ 25.674945] mmc0: new SD card at address 0002 [ 25.834259] Linux video capture interface: v2.00 [ 25.916320] ACPI: Battery Slot [BAT0] (battery present) [ 25.982236] mmcblk0: mmc0:0002 SDN2G 1955328KiB [ 25.982311] mmcblk0: p1 [ 26.124056] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 26.159716] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 26.161430] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 26.163018] input: USB 2.0 Camera as /class/input/input8 [ 26.229269] usbcore: registered new interface driver uvcvideo [ 26.229291] USB Video Class driver (v0.1.0) [ 26.383370] b43-phy0: Broadcom 4311 WLAN found [ 26.449777] phy0: Selected rate control algorithm 'pid' [ 26.566271] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] [ 26.735060] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 26.735067] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, high) -> IRQ 22 [ 26.735092] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 28.024293] lp: driver loaded but no devices found [ 28.474697] Adding 1880056k swap on /dev/mapper/split-Ubuntu_swap. Priority:-1 extents:1 across:1880056k [ 28.568041] EXT3 FS on dm-0, internal journal [ 28.965144] kjournald starting. Commit interval 5 seconds [ 28.976482] EXT3 FS on sda1, internal journal [ 28.976488] EXT3-fs: mounted filesystem with ordered data mode. [ 29.500445] __ratelimit: 11 callbacks suppressed [ 29.500450] type=1505 audit(1221004060.834:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4318 [ 29.695796] type=1505 audit(1221004061.026:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4325 [ 29.696063] type=1505 audit(1221004061.030:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4325 [ 29.972503] ip_tables: (C) 2000-2006 Netfilter Core Team