[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-2-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-0ubuntu1) ) #1 SMP Thu Aug 28 17:18:43 UTC 2008 (Ubuntu 2.6.27-2.3-generic) [ 0.000000] Command line: BOOT_IMAGE=(hd0,1)/vmlinuz-2.6.27-2-generic root=/dev/mapper/split-Ubuntu_root ro nohz=off highres=off debug apci=debug [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037f00000 (usable) [ 0.000000] BIOS-e820: 0000000037f00000 - 0000000037f17000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037f17000 - 0000000037f80000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037f80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x37f00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 0037e00000 page 2M [ 0.000000] 0037e00000 - 0037f00000 page 4k [ 0.000000] kernel direct mapping tables up to 37f00000 @ 8000-b000 [ 0.000000] last_map_addr: 37f00000 end: 37f00000 [ 0.000000] RAMDISK: 29641000 - 29f7f31d [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F87B0, 0024 (r3 HPQOEM) [ 0.000000] ACPI: XSDT 37F10032, 005C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 37F16AA6, 00F4 (r3 HPQOEM SLIC-MPC 6040000 PTL F4240) [ 0.000000] ACPI: DSDT 37F1008E, 6A18 (r1 HPQOEM SLIC-MPC 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 37F17FC0, 0040 [ 0.000000] ACPI: SLIC 37F16C0E, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1) [ 0.000000] ACPI: MCFG 37F16D84, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: HPET 37F16DC0, 0038 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: APIC 37F16DF8, 005E (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 37F16E56, 0028 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: SSDT 37F16E7E, 0182 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037f00000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037f00000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [0000000000009000 - 000000000000ffdf] pages 7 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037f00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008da09c] TEXT DATA BSS ==> [0000200000 - 00008da09c] [ 0.000000] #3 [0029641000 - 0029f7f31d] RAMDISK ==> [0029641000 - 0029f7f31d] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] found SMP MP-table at [ffff8800000f8780] 000f8780 [ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00037f00 [ 0.000000] On node 0 totalpages: 229021 [ 0.000000] DMA zone: 2075 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 221508 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 223583 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz-2.6.27-2-generic root=/dev/mapper/split-Ubuntu_root ro nohz=off highres=off debug apci=debug [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 1607.315 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ c110000000 size 32 MB [ 0.004000] Aperture beyond 4GB. Ignoring. [ 0.004000] Memory: 884988k/916480k available (3211k kernel code, 31096k reserved, 1597k data, 540k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.63 BogoMIPS (lpj=6429260) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 0/0 -> Node 0 [ 0.004000] tseg: 0037f80000 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using C1E aware idle routine [ 0.004768] ACPI: Core revision 20080609 [ 0.006986] ACPI: Checking initramfs for custom DSDT [ 0.516698] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.559275] CPU0: AMD Turion(tm) 64 X2 stepping 02 [ 0.559404] Using local APIC timer interrupts. [ 0.560033] APIC timer calibration result 12557150 [ 0.560086] Detected 12.557 MHz APIC timer. [ 0.560341] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3214.71 BogoMIPS (lpj=6429421) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.648196] CPU1: <6>System has C1E enabled [ 0.004000] Switch to broadcast mode on CPU1 [ 0.648696] AMD Turion(tm) 64 X2 stepping 02 [ 0.648802] Brought up 2 CPUs [ 0.648854] Total of 2 processors activated (6429.34 BogoMIPS). [ 0.649004] CPU0 attaching sched-domain: [ 0.649057] domain 0: span 0-1 level CPU [ 0.649149] groups: 0 1 [ 0.649313] domain 1: span 0-1 level NODE [ 0.649402] groups: 0-1 [ 0.649529] CPU1 attaching sched-domain: [ 0.649581] domain 0: span 0-1 level CPU [ 0.649670] groups: 1 0 [ 0.649835] domain 1: span 0-1 level NODE [ 0.649925] groups: 0-1 [ 0.650167] Switch to broadcast mode on CPU0 [ 0.650795] net_namespace: 1552 bytes [ 0.650851] Booting paravirtualized kernel on bare hardware [ 0.651510] Time: 3:23:22 Date: 09/09/08 [ 0.651680] NET: Registered protocol family 16 [ 0.652451] node 0 link 0: io port [2000, fffff] [ 0.652525] TOM: 0000000040000000 aka 1024M [ 0.652600] node 0 link 0: mmio [e0000000, efffffff] [ 0.652716] node 0 link 0: mmio [a0000, bffff] [ 0.652830] node 0 link 0: mmio [40000000, fe0bffff] [ 0.652946] bus: [00,ff] on node 0 link 0 [ 0.653015] bus: 00 index 0 io port: [0, ffff] [ 0.653087] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 0.653164] bus: 00 index 2 mmio: [a0000, bffff] [ 0.653256] ACPI: bus type pci registered [ 0.653601] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4 [ 0.653685] PCI: MCFG area at e0000000 reserved in E820 [ 0.654535] PCI: Using MMCONFIG at e0000000 - e04fffff [ 0.654611] PCI: Using configuration type 1 for base access [ 0.662657] ACPI: EC: Look up EC in DSDT [ 0.686076] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.692655] ACPI: Interpreter enabled [ 0.692725] ACPI: (supports S0 S3 S4 S5) [ 0.693009] ACPI: Using IOAPIC for interrupt routing [ 0.692031] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.692792] ACPI: EC: GPE storm detected, disabling EC GPE [ 1.332607] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62 [ 1.332691] ACPI: EC: driver started in poll mode [ 1.333038] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.333811] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.333893] pci 0000:00:02.0: PME# disabled [ 1.334025] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.334107] pci 0000:00:03.0: PME# disabled [ 1.334583] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 1.334665] pci 0000:00:0a.1: PME# disabled [ 1.334948] pci 0000:00:0b.0: supports D1 [ 1.335016] pci 0000:00:0b.0: supports D2 [ 1.335085] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.335169] pci 0000:00:0b.0: PME# disabled [ 1.335334] pci 0000:00:0b.1: supports D1 [ 1.335402] pci 0000:00:0b.1: supports D2 [ 1.335471] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.335554] pci 0000:00:0b.1: PME# disabled [ 1.335982] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 1.336039] pci 0000:00:10.1: PME# disabled [ 1.336200] pci 0000:00:14.0: supports D1 [ 1.336268] pci 0000:00:14.0: supports D2 [ 1.336337] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.336419] pci 0000:00:14.0: PME# disabled [ 1.336816] pci 0000:01:00.0: supports D1 [ 1.336885] pci 0000:01:00.0: supports D2 [ 1.337020] PCI: bridge 0000:00:02.0 32bit mmio: [b3000000, b30fffff] [ 1.337177] PCI: bridge 0000:00:03.0 io port: [4000, 4fff] [ 1.337253] PCI: bridge 0000:00:03.0 32bit mmio: [b4000000, b7ffffff] [ 1.337338] PCI: bridge 0000:00:03.0 64bit mmio pref: [d0000000, d01fffff] [ 1.337534] pci 0000:05:09.0: supports D1 [ 1.337602] pci 0000:05:09.0: supports D2 [ 1.337670] pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.337753] pci 0000:05:09.0: PME# disabled [ 1.337914] pci 0000:05:09.1: supports D1 [ 1.337982] pci 0000:05:09.1: supports D2 [ 1.338050] pci 0000:05:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.338133] pci 0000:05:09.1: PME# disabled [ 1.338292] pci 0000:05:09.2: supports D1 [ 1.338360] pci 0000:05:09.2: supports D2 [ 1.338429] pci 0000:05:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.338511] pci 0000:05:09.2: PME# disabled [ 1.338671] pci 0000:05:09.3: supports D1 [ 1.338739] pci 0000:05:09.3: supports D2 [ 1.338807] pci 0000:05:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.338890] pci 0000:05:09.3: PME# disabled [ 1.339049] pci 0000:05:09.4: supports D1 [ 1.339117] pci 0000:05:09.4: supports D2 [ 1.339186] pci 0000:05:09.4: PME# supported from D0 D1 D2 D3hot D3cold [ 1.339270] pci 0000:05:09.4: PME# disabled [ 1.339388] pci 0000:00:10.0: transparent bridge [ 1.339464] PCI: bridge 0000:00:10.0 32bit mmio: [b8000000, b80fffff] [ 1.339574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.340196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 1.340475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 1.340711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 3.042620] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 22 23) *0, disabled. [ 3.043301] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 22 23) *10 [ 3.043928] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 *10 11 14 15) [ 3.044544] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 3.045259] ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled. [ 3.045775] ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *11 [ 3.046255] ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10 [ 3.046735] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 22 23) *0, disabled. [ 3.047406] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 22 23) *10 [ 3.048053] ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 22 23) *11 [ 3.048680] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 22 23) *11 [ 3.049306] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 22 23) *7 [ 3.049934] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 22 23) *11 [ 3.050560] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 22 23) *0, disabled. [ 3.051233] ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 22 23) *0, disabled. [ 3.051905] ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 22 23) *0, disabled. [ 3.052553] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 22 23) *0, disabled. [ 3.053236] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 22 23) *5 [ 3.053862] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 22 23) *0 [ 3.054485] Linux Plug and Play Support v0.97 (c) Adam Belay [ 3.054583] pnp: PnP ACPI init [ 3.054641] ACPI: bus type pnp registered [ 3.089415] pnp: PnP ACPI: found 11 devices [ 3.089467] ACPI: ACPI bus type pnp unregistered [ 3.090055] PCI: Using ACPI for IRQ routing [ 3.100067] NET: Registered protocol family 8 [ 3.100119] NET: Registered protocol family 20 [ 3.100221] NetLabel: Initializing [ 3.100273] NetLabel: domain hash size = 128 [ 3.100322] NetLabel: protocols = UNLABELED CIPSOv4 [ 3.100404] NetLabel: unlabeled traffic allowed by default [ 3.100803] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 3.101000] hpet0: 3 32-bit timers, 25000000 Hz [ 3.103422] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 3.103475] actual entries 65586 [ 3.103661] AppArmor: AppArmor Filesystem Enabled [ 3.103745] ACPI: RTC can wake from S4 [ 3.112072] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 3.112142] system 00:02: ioport range 0x1000-0x107f has been reserved [ 3.112196] system 00:02: ioport range 0x1080-0x10ff has been reserved [ 3.112250] system 00:02: ioport range 0x1400-0x147f has been reserved [ 3.112304] system 00:02: ioport range 0x1480-0x14ff has been reserved [ 3.112359] system 00:02: ioport range 0x1800-0x187f has been reserved [ 3.112413] system 00:02: ioport range 0x1880-0x18ff has been reserved [ 3.112469] system 00:02: ioport range 0x2000-0x203f has been reserved [ 3.112529] system 00:03: ioport range 0x360-0x361 has been reserved [ 3.112584] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 3.113563] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 3.113616] pci 0000:00:02.0: IO window: disabled [ 3.113670] pci 0000:00:02.0: MEM window: 0xb3000000-0xb30fffff [ 3.113723] pci 0000:00:02.0: PREFETCH window: disabled [ 3.113776] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 3.113829] pci 0000:00:03.0: IO window: 0x4000-0x4fff [ 3.113882] pci 0000:00:03.0: MEM window: 0xb4000000-0xb7ffffff [ 3.113935] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 3.114000] pci 0000:00:10.0: PCI bridge, secondary bus 0000:05 [ 3.114052] pci 0000:00:10.0: IO window: disabled [ 3.114105] pci 0000:00:10.0: MEM window: 0xb8000000-0xb80fffff [ 3.114159] pci 0000:00:10.0: PREFETCH window: disabled [ 3.114224] pci 0000:00:02.0: setting latency timer to 64 [ 3.114280] pci 0000:00:03.0: setting latency timer to 64 [ 3.114336] pci 0000:00:10.0: setting latency timer to 64 [ 3.114389] bus: 00 index 0 io port: [0, ffff] [ 3.114439] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 3.114491] bus: 01 index 0 mmio: [0, 0] [ 3.114541] bus: 01 index 1 mmio: [b3000000, b30fffff] [ 3.114592] bus: 01 index 2 mmio: [0, 0] [ 3.114642] bus: 01 index 3 mmio: [0, 0] [ 3.114692] bus: 03 index 0 io port: [4000, 4fff] [ 3.114743] bus: 03 index 1 mmio: [b4000000, b7ffffff] [ 3.114794] bus: 03 index 2 mmio: [d0000000, d01fffff] [ 3.114846] bus: 03 index 3 mmio: [0, 0] [ 3.114895] bus: 05 index 0 mmio: [0, 0] [ 3.114946] bus: 05 index 1 mmio: [b8000000, b80fffff] [ 3.114998] bus: 05 index 2 mmio: [0, 0] [ 3.115048] bus: 05 index 3 io port: [0, ffff] [ 3.115098] bus: 05 index 4 mmio: [0, ffffffffffffffff] [ 3.115163] NET: Registered protocol family 2 [ 3.148155] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 3.148890] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 3.150608] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.151410] TCP: Hash tables configured (established 131072 bind 65536) [ 3.151466] TCP reno registered [ 3.160155] NET: Registered protocol family 1 [ 3.160375] checking if image is initramfs... it is [ 4.200344] Freeing initrd memory: 9464k freed [ 4.206988] Simple Boot Flag at 0x36 set to 0x1 [ 4.208399] audit: initializing netlink socket (disabled) [ 4.208466] type=2000 audit(1220930605.208:1): initialized [ 4.215810] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.219277] VFS: Disk quotas dquot_6.5.1 [ 4.219439] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.219635] msgmni has been set to 1746 [ 4.219854] io scheduler noop registered [ 4.219906] io scheduler anticipatory registered [ 4.219958] io scheduler deadline registered [ 4.220185] io scheduler cfq registered (default) [ 4.220254] pci 0000:00:00.0: Enabling HT MSI Mapping [ 4.220354] pci 0000:00:02.0: Enabling HT MSI Mapping [ 4.220415] pci 0000:00:03.0: Enabling HT MSI Mapping [ 4.220475] pci 0000:00:05.0: Boot video device [ 4.220547] pci 0000:00:09.0: Enabling HT MSI Mapping [ 4.432075] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 4.432139] pci 0000:00:10.0: Enabling HT MSI Mapping [ 4.432202] pci 0000:00:10.1: Enabling HT MSI Mapping [ 4.432439] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 4.432517] pcieport-driver 0000:00:02.0: found MSI capability [ 4.432595] pci_express 0000:00:02.0:pcie00: allocate port service [ 4.432711] pci_express 0000:00:02.0:pcie03: allocate port service [ 4.435420] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 4.435495] pcieport-driver 0000:00:03.0: found MSI capability [ 4.435565] pci_express 0000:00:03.0:pcie00: allocate port service [ 4.435671] pci_express 0000:00:03.0:pcie03: allocate port service [ 4.477127] hpet_resources: 0xfed00000 is busy [ 4.477291] Linux agpgart interface v0.103 [ 4.477343] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 4.480781] brd: module loaded [ 4.480930] input: Macintosh mouse button emulation as /class/input/input0 [ 4.481145] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.481625] i8042.c: Detected active multiplexing controller, rev 1.1. [ 4.481764] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.481820] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.481874] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.481927] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.481980] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.496182] mice: PS/2 mouse device common for all mice [ 4.496423] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 4.496513] rtc0: alarms up to one year, y3k, hpet irqs [ 4.496622] cpuidle: using governor ladder [ 4.496673] cpuidle: using governor menu [ 4.497257] aufs 20080609 [ 4.498037] registered taskstats version 1 [ 4.498298] Magic number: 8:830:360 [ 4.498518] rtc_cmos 00:06: setting system clock to 2008-09-09 03:23:26 UTC (1220930606) [ 4.498583] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.498636] EDD information not available. [ 4.498746] Freeing unused kernel memory: 540k freed [ 4.499292] input: AT Translated Set 2 keyboard as /class/input/input1 [ 4.669697] compcache: Compressed swap size set to: 223752 KB [ 4.670495] TLSF: pool: ffffc200001f1000, init_size=16384, max_size=0, grow_size=16384 [ 4.759150] fuse init (API version 7.9) [ 4.800534] uvesafb: failed to execute /sbin/v86d [ 4.800590] uvesafb: make sure that the v86d helper is installed and executable [ 4.800652] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 4.800707] uvesafb: vbe_init() failed with -22 [ 4.800765] uvesafb: probe of uvesafb.0 failed with error -22 [ 4.888006] processor ACPI0007:00: registered as cooling_device0 [ 4.888095] ACPI: Processor [CPU0] (supports 8 throttling states) [ 4.888375] processor ACPI0007:01: registered as cooling_device1 [ 4.888435] ACPI: Processor [CPU1] (supports 8 throttling states) [ 5.268384] thermal LNXTHERM:01: registered as thermal_zone0 [ 5.556162] ACPI: Thermal Zone [TZS0] (65 C) [ 5.712252] thermal LNXTHERM:02: registered as thermal_zone1 [ 5.808139] ACPI: Thermal Zone [TZS1] (68 C) [ 5.830156] device-mapper: uevent: version 1.0.3 [ 5.830477] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.930443] Adding 223748k swap on /dev/ramzswap0. Priority:100 extents:1 across:223748k [ 7.101307] usbcore: registered new interface driver usbfs [ 7.101396] usbcore: registered new interface driver hub [ 7.101529] usbcore: registered new device driver usb [ 7.102282] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19 [ 7.102347] b43-pci-bridge 0000:01:00.0: PCI INT A -> Link[LK2E] -> GSI 19 (level, high) -> IRQ 19 [ 7.102420] b43-pci-bridge 0000:01:00.0: setting latency timer to 64 [ 7.135512] No dock devices found. [ 7.173490] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.191546] ssb: Sonics Silicon Backplane found on PCI device 0000:01:00.0 [ 7.192442] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 [ 7.192510] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, high) -> IRQ 23 [ 7.192586] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 7.192640] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 7.192771] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 7.192882] ehci_hcd 0000:00:0b.1: debug port 1 [ 7.192935] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 7.193009] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xb0005000 [ 7.203578] SCSI subsystem initialized [ 7.204024] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.204348] usb usb1: configuration #1 chosen from 1 choice [ 7.204446] hub 1-0:1.0: USB hub found [ 7.204509] hub 1-0:1.0: 8 ports detected [ 7.248039] libata version 3.00 loaded. [ 7.415097] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 7.415165] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 [ 7.415241] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 7.415295] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 7.415398] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 7.415496] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 [ 7.474152] usb usb2: configuration #1 chosen from 1 choice [ 7.474246] hub 2-0:1.0: USB hub found [ 7.474309] hub 2-0:1.0: 8 ports detected [ 7.531995] usb 1-8: new high speed USB device using ehci_hcd and address 2 [ 7.582157] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 18 [ 7.582224] ohci1394 0000:05:09.0: PCI INT A -> Link[LNK1] -> GSI 18 (level, high) -> IRQ 18 [ 7.602278] sata_nv 0000:00:0e.0: version 3.5 [ 7.602347] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) [ 7.602928] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 17 [ 7.602991] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 17 (level, high) -> IRQ 17 [ 7.603055] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 7.603167] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 7.603391] scsi0 : sata_nv [ 7.604229] scsi1 : sata_nv [ 7.604509] ata1: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 17 [ 7.604566] ata2: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 17 [ 7.634056] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[b8000000-b80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 7.733353] usb 1-8: configuration #1 chosen from 1 choice [ 8.080036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.088213] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7BP, max UDMA/100 [ 8.088268] ata1.00: 312581808 sectors, multi 16: LBA48 [ 8.104202] ata1.00: configured for UDMA/100 [ 8.434626] ata2: SATA link down (SStatus 0 SControl 300) [ 8.434749] isa bounce pool size: 16 pages [ 8.434957] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 8.435154] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 8.435778] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 16 [ 8.435841] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 16 (level, high) -> IRQ 16 [ 8.435907] forcedeth 0000:00:14.0: setting latency timer to 64 [ 8.918345] ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a005b2d5003] [ 8.956536] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:d3:1d:41:61 [ 8.956603] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 [ 8.960657] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 8.967371] pata_amd 0000:00:0d.0: version 0.3.10 [ 8.967472] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 8.970017] scsi2 : pata_amd [ 8.970159] scsi3 : pata_amd [ 8.971276] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 8.971334] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 8.981041] Driver 'sd' needs updating - please use bus_type methods [ 8.981257] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 8.981344] sd 0:0:0:0: [sda] Write Protect is off [ 8.981397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.981506] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.981700] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 8.981783] sd 0:0:0:0: [sda] Write Protect is off [ 8.981835] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.981938] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.982008] sda:<6>ata4.00: ATAPI: SONY DVD RW DW-G520A, GPSD, max MWDMA2 [ 9.324356] ata4: nv_mode_filter: 0x39f&0x7001->0x1, BIOS=0x0 (0x0) ACPI=0x7001 (60:600:0x11) [ 9.368282] ata4.00: configured for PIO0 [ 9.370233] scsi 3:0:0:0: CD-ROM SONY DVD RW DW-G520A GPSD PQ: 0 ANSI: 5 [ 9.381879] Driver 'sr' needs updating - please use bus_type methods [ 9.402433] sda1 sda2 [ 9.402724] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.410234] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.410333] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 9.412549] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.412621] Uniform CD-ROM driver Revision: 3.20 [ 9.412787] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 13.171718] end_request: I/O error, dev sr0, sector 416128 [ 13.171778] Buffer I/O error on device sr0, logical block 104032 [ 13.380645] end_request: I/O error, dev sr0, sector 416132 [ 13.380699] Buffer I/O error on device sr0, logical block 104033 [ 13.606191] end_request: I/O error, dev sr0, sector 416128 [ 13.606246] Buffer I/O error on device sr0, logical block 104032 [ 13.606300] Buffer I/O error on device sr0, logical block 104033 [ 13.820354] end_request: I/O error, dev sr0, sector 416240 [ 13.820408] Buffer I/O error on device sr0, logical block 104060 [ 14.004337] end_request: I/O error, dev sr0, sector 416244 [ 14.004390] Buffer I/O error on device sr0, logical block 104061 [ 14.202045] end_request: I/O error, dev sr0, sector 416240 [ 14.202100] Buffer I/O error on device sr0, logical block 104060 [ 14.202154] Buffer I/O error on device sr0, logical block 104061 [ 14.654358] end_request: I/O error, dev sr0, sector 416256 [ 14.654412] Buffer I/O error on device sr0, logical block 104064 [ 14.832671] end_request: I/O error, dev sr0, sector 416256 [ 14.832725] Buffer I/O error on device sr0, logical block 104064 [ 15.006049] end_request: I/O error, dev sr0, sector 416256 [ 15.152266] end_request: I/O error, dev sr0, sector 416256 [ 15.315352] end_request: I/O error, dev sr0, sector 416256 [ 15.473624] end_request: I/O error, dev sr0, sector 416256 [ 15.627226] end_request: I/O error, dev sr0, sector 416256 [ 15.854363] end_request: I/O error, dev sr0, sector 416192 [ 16.107616] end_request: I/O error, dev sr0, sector 416248 [ 16.243546] end_request: I/O error, dev sr0, sector 416252 [ 16.403755] end_request: I/O error, dev sr0, sector 416256 [ 16.526488] end_request: I/O error, dev sr0, sector 416256 [ 16.770165] PM: Starting manual resume from disk [ 16.770222] PM: Resume from partition 253:1 [ 16.770271] PM: Checking hibernation image. [ 16.770532] PM: Resume from disk failed. [ 17.218689] kjournald starting. Commit interval 5 seconds [ 17.218709] EXT3-fs: mounted filesystem with ordered data mode. [ 26.862795] udevd version 124 started [ 28.628064] input: Power Button (FF) as /class/input/input2 [ 28.691920] ACPI: Power Button (FF) [PWRF] [ 28.692068] input: Lid Switch as /class/input/input3 [ 28.763883] ACPI: Lid Switch [LID0] [ 28.764103] input: Sleep Button (CM) as /class/input/input4 [ 28.795938] ACPI: Sleep Button (CM) [SLPB] [ 28.796103] input: Power Button (CM) as /class/input/input5 [ 28.859983] ACPI: Power Button (CM) [PWRB] [ 28.860429] ACPI: WMI: Mapper loaded [ 28.991945] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.061117] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.115930] acpi device:03: registered as cooling_device2 [ 30.116260] input: Video Bus as /class/input/input6 [ 30.171984] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 30.211994] ACPI: AC Adapter [ADP1] (on-line) [ 30.340888] nvidia: module license 'NVIDIA' taints kernel. [ 30.812029] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 30.812124] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 30.894239] sdhci: Secure Digital Host Controller Interface driver [ 30.894298] sdhci: Copyright(c) Pierre Ossman [ 30.927876] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 21 [ 30.927945] nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 21 (level, high) -> IRQ 21 [ 30.928013] nvidia 0000:00:05.0: setting latency timer to 64 [ 30.940248] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.70 Wed Aug 27 12:46:19 PDT 2008 [ 30.971995] sdhci-pci 0000:05:09.1: SDHCI controller found [1180:0822] (rev 19) [ 30.972639] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 23 [ 30.972695] sdhci-pci 0000:05:09.1: PCI INT B -> Link[LNK2] -> GSI 23 (level, high) -> IRQ 23 [ 30.976231] mmc0: SDHCI controller on PCI [0000:05:09.1] using PIO [ 31.046404] mmc0: new SD card at address 0002 [ 31.189843] ricoh-mmc: Ricoh MMC Controller disabling driver [ 31.189900] ricoh-mmc: Copyright(c) Philip Langdale [ 31.196101] ricoh-mmc: Ricoh MMC controller found at 0000:05:09.2 [1180:0843] (rev 1) [ 31.196186] ricoh-mmc: Controller is now disabled. [ 31.393846] Linux video capture interface: v2.00 [ 31.588110] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 31.589917] input: USB 2.0 Camera as /class/input/input7 [ 31.599904] usbcore: registered new interface driver uvcvideo [ 31.599959] USB Video Class driver (v0.1.0) [ 31.753552] mmcblk0: mmc0:0002 SDN2G 1955328KiB [ 31.753680] mmcblk0: p1 [ 31.865236] b43-phy0: Broadcom 4311 WLAN found [ 31.934171] phy0: Selected rate control algorithm 'pid' [ 32.017087] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 32.049797] input: SynPS/2 Synaptics TouchPad as /class/input/input8 [ 32.056986] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] [ 32.308166] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 32.308227] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, high) -> IRQ 22 [ 32.308311] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 32.332025] ACPI: Battery Slot [BAT0] (battery present) [ 32.735044] lp: driver loaded but no devices found [ 33.191607] Adding 1880056k swap on /dev/mapper/split-Ubuntu_swap. Priority:-1 extents:1 across:1880056k [ 33.787127] EXT3 FS on dm-0, internal journal [ 34.571245] kjournald starting. Commit interval 5 seconds [ 34.582626] EXT3 FS on sda1, internal journal [ 34.582633] EXT3-fs: mounted filesystem with ordered data mode. [ 35.106737] __ratelimit: 11 callbacks suppressed [ 35.106742] type=1505 audit(1220930636.602:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4350 [ 35.302397] type=1505 audit(1220930636.798:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4355 [ 35.302639] type=1505 audit(1220930636.798:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4355 [ 35.523823] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.730168] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [ 35.730171] atkbd.c: Use 'setkeycodes e059 ' to make it known. [ 35.730837] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [ 35.730841] atkbd.c: Use 'setkeycodes e059 ' to make it known.