[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Aug 12 13:37:22 UTC 2008 (Ubuntu 2.6.24-21.40-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f53f0 [ 0.000000] Entering add_active_range(0, 0, 524000) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524000 [ 0.000000] On node 0 totalpages: 524000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292323 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6DE0 checksum 0 [ 0.000000] ACPI: RSDP 000F6DE0, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7FEE3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 7FEE3180, 4C2E (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7FEE0000, 0040 [ 0.000000] ACPI: HPET 7FEE7F00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG 7FEE7F80, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC 7FEE7E00, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT 7FEE8000, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT 7FEE8490, 0324 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 7:7 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 7:7 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519907 [ 0.000000] Kernel command line: root=UUID=f3dfd6eb-a3d6-497a-aaf3-245505eb2814 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 3166.377 MHz processor. [ 29.969176] Console: colour VGA+ 80x25 [ 29.969178] console [tty0] enabled [ 29.974648] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 29.974888] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 30.021588] Memory: 2066072k/2096000k available (2177k kernel code, 28668k reserved, 1006k data, 368k init, 1178496k highmem) [ 30.021732] virtual kernel memory layout: [ 30.021732] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 30.021733] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 30.021733] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 30.021734] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 30.021734] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 30.021735] .data : 0xc0320504 - 0xc041bdc4 (1006 kB) [ 30.021735] .text : 0xc0100000 - 0xc0320504 (2177 kB) [ 30.022401] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 30.022580] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 30.022783] hpet clockevent registered [ 30.102686] Calibrating delay using timer specific routine.. 6336.72 BogoMIPS (lpj=12673450) [ 30.102856] Security Framework initialized [ 30.102937] SELinux: Disabled at boot. [ 30.103020] AppArmor: AppArmor initialized [ 30.103099] Failure registering capabilities with primary security module. [ 30.103192] Mount-cache hash table entries: 512 [ 30.103341] Initializing cgroup subsys ns [ 30.103420] Initializing cgroup subsys cpuacct [ 30.103505] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000000 [ 30.103509] monitor/mwait feature present. [ 30.103587] using mwait in idle threads. [ 30.103665] CPU: L1 I cache: 32K, L1 D cache: 32K [ 30.103775] CPU: L2 cache: 6144K [ 30.103850] CPU: Physical Processor ID: 0 [ 30.103927] CPU: Processor Core ID: 0 [ 30.104003] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0008e3fd 00000000 00000001 00000000 [ 30.104007] Compat vDSO mapped to ffffe000. [ 30.104092] Checking 'hlt' instruction... OK. [ 30.119010] SMP alternatives: switching to UP code [ 30.120111] Early unpacking initramfs... done [ 30.302866] ACPI: Core revision 20070126 [ 30.302968] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 31.317859] CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 06 [ 31.318020] SMP alternatives: switching to SMP code [ 31.318596] Booting processor 1/1 eip 3000 [ 31.329103] Initializing CPU#1 [ 31.409029] Calibrating delay using timer specific routine.. 6332.56 BogoMIPS (lpj=12665134) [ 31.409034] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000000 [ 31.409036] monitor/mwait feature present. [ 31.409038] CPU: L1 I cache: 32K, L1 D cache: 32K [ 31.409039] CPU: L2 cache: 6144K [ 31.409040] CPU: Physical Processor ID: 0 [ 31.409041] CPU: Processor Core ID: 1 [ 31.409042] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0008e3fd 00000000 00000001 00000000 [ 31.409817] CPU1: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 06 [ 31.410557] Total of 2 processors activated (12669.29 BogoMIPS). [ 31.410778] ENABLING IO-APIC IRQs [ 31.411006] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 31.556908] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 31.577006] Brought up 2 CPUs [ 31.577095] CPU0 attaching sched-domain: [ 31.577096] domain 0: span 03 [ 31.577097] groups: 01 02 [ 31.577099] CPU1 attaching sched-domain: [ 31.577099] domain 0: span 03 [ 31.577100] groups: 02 01 [ 31.577218] net_namespace: 64 bytes [ 31.577300] Booting paravirtualized kernel on bare hardware [ 31.577623] Time: 16:10:16 Date: 08/24/08 [ 31.577715] NET: Registered protocol family 16 [ 31.577892] EISA bus registered [ 31.577968] ACPI: bus type pci registered [ 31.583754] PCI: PCI BIOS revision 3.00 entry at 0xfb550, last bus=6 [ 31.583841] PCI: Using configuration type 1 [ 31.583933] Setting up standard PCI resources [ 31.585068] ACPI: EC: Look up EC in DSDT [ 31.588089] ACPI: Interpreter enabled [ 31.588169] ACPI: (supports S0 S3 S4 S5) [ 31.588372] ACPI: Using IOAPIC for interrupt routing [ 31.591006] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 31.591605] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 31.591694] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 31.592432] PCI: Transparent bridge - 0000:00:1e.0 [ 31.592535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 31.592614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 31.592655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 31.592697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 31.592735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 31.601420] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 31.601978] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 31.602536] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 31.603093] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 31.603649] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 31.604207] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 31.604763] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 31.605387] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 31.605955] Linux Plug and Play Support v0.97 (c) Adam Belay [ 31.606054] pnp: PnP ACPI init [ 31.606130] ACPI: bus type pnp registered [ 31.607263] pnpacpi: exceeded the max number of mem resources: 12 [ 31.607420] pnp: PnP ACPI: found 11 devices [ 31.607499] ACPI: ACPI bus type pnp unregistered [ 31.607580] PnPBIOS: Disabled by ACPI PNP [ 31.607766] PCI: Using ACPI for IRQ routing [ 31.607845] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 31.660723] NET: Registered protocol family 8 [ 31.660804] NET: Registered protocol family 20 [ 31.660901] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 31.661132] hpet0: 4 64-bit timers, 14318180 Hz [ 31.662231] AppArmor: AppArmor Filesystem Enabled [ 31.664712] Time: tsc clocksource has been installed. [ 31.664800] Switched to high resolution mode on CPU 0 [ 31.664894] Switched to high resolution mode on CPU 1 [ 31.680723] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 31.680820] system 00:01: ioport range 0x290-0x29f has been reserved [ 31.680909] system 00:01: ioport range 0x800-0x87f has been reserved [ 31.680997] system 00:01: ioport range 0x290-0x294 has been reserved [ 31.681084] system 00:01: ioport range 0x880-0x88f has been reserved [ 31.681177] system 00:07: ioport range 0x400-0x4bf could not be reserved [ 31.681268] system 00:08: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 31.681394] system 00:09: iomem range 0xcc600-0xcffff has been reserved [ 31.681483] system 00:09: iomem range 0xf0000-0xf7fff could not be reserved [ 31.681573] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 31.681664] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 31.681755] system 00:09: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 31.681878] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 31.681967] system 00:09: iomem range 0x100000-0x7fedffff could not be reserved [ 31.682091] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 31.683787] system 00:09: iomem range 0xfed10000-0xfed1dfff could not be reserved [ 31.683911] system 00:09: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 31.684035] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 31.684158] system 00:09: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 31.714480] PCI: Bridge: 0000:00:01.0 [ 31.714556] IO window: 9000-9fff [ 31.714632] MEM window: f4000000-f7ffffff [ 31.714711] PREFETCH window: e0000000-efffffff [ 31.714792] PCI: Bridge: 0000:00:06.0 [ 31.714867] IO window: 7000-7fff [ 31.714943] MEM window: disabled. [ 31.715018] PREFETCH window: disabled. [ 31.715096] PCI: Bridge: 0000:00:1c.0 [ 31.715173] IO window: 8000-8fff [ 31.715250] MEM window: disabled. [ 31.715326] PREFETCH window: disabled. [ 31.715405] PCI: Bridge: 0000:00:1c.3 [ 31.715482] IO window: a000-afff [ 31.715559] MEM window: fc000000-fc0fffff [ 31.715638] PREFETCH window: disabled. [ 31.715717] PCI: Bridge: 0000:00:1c.5 [ 31.715793] IO window: b000-bfff [ 31.715870] MEM window: f8000000-f9ffffff [ 31.715949] PREFETCH window: 80000000-800fffff [ 31.716031] PCI: Bridge: 0000:00:1e.0 [ 31.716108] IO window: c000-cfff [ 31.716185] MEM window: fa000000-fbffffff [ 31.716264] PREFETCH window: disabled. [ 31.716350] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 31.716504] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 31.716509] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 31.716663] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 31.716677] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 31.716831] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 31.716843] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 31.716997] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 31.717009] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 18 [ 31.717163] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 31.717169] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 31.717177] NET: Registered protocol family 2 [ 31.756613] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 31.756821] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 31.757164] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 31.757352] TCP: Hash tables configured (established 131072 bind 65536) [ 31.757441] TCP reno registered [ 31.768640] checking if image is initramfs... it is [ 32.128298] Freeing initrd memory: 7286k freed [ 32.128781] audit: initializing netlink socket (disabled) [ 32.128873] audit(1219594214.972:1): initialized [ 32.129071] highmem bounce pool size: 64 pages [ 32.130133] VFS: Disk quotas dquot_6.5.1 [ 32.130249] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 32.130406] io scheduler noop registered [ 32.130483] io scheduler anticipatory registered [ 32.130563] io scheduler deadline registered [ 32.130646] io scheduler cfq registered (default) [ 32.130828] Boot video device is 0000:01:00.0 [ 32.130883] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 32.130901] assign_interrupt_mode Found MSI capability [ 32.130998] Allocate Port Service[0000:00:01.0:pcie00] [ 32.131038] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 32.131056] assign_interrupt_mode Found MSI capability [ 32.131151] Allocate Port Service[0000:00:06.0:pcie00] [ 32.131189] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 32.131216] assign_interrupt_mode Found MSI capability [ 32.131319] Allocate Port Service[0000:00:1c.0:pcie00] [ 32.131335] Allocate Port Service[0000:00:1c.0:pcie02] [ 32.131384] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 32.131411] assign_interrupt_mode Found MSI capability [ 32.131514] Allocate Port Service[0000:00:1c.3:pcie00] [ 32.131529] Allocate Port Service[0000:00:1c.3:pcie02] [ 32.131578] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 32.131605] assign_interrupt_mode Found MSI capability [ 32.131708] Allocate Port Service[0000:00:1c.5:pcie00] [ 32.131724] Allocate Port Service[0000:00:1c.5:pcie02] [ 32.131853] isapnp: Scanning for PnP cards... [ 32.484451] isapnp: No Plug & Play device found [ 32.497053] Real Time Clock Driver v1.12ac [ 32.497227] hpet_resources: 0xfed00000 is busy [ 32.497248] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 32.497949] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 32.498106] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 32.498297] PNP: No PS/2 controller found. Probing ports directly. [ 32.498660] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 32.498746] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 32.511672] mice: PS/2 mouse device common for all mice [ 32.511813] EISA: Probing bus 0 at eisa.0 [ 32.511906] Cannot allocate resource for EISA slot 7 [ 32.511988] Cannot allocate resource for EISA slot 8 [ 32.512069] EISA: Detected 0 cards. [ 32.512145] cpuidle: using governor ladder [ 32.512223] cpuidle: using governor menu [ 32.512337] NET: Registered protocol family 1 [ 32.512431] Using IPI No-Shortcut mode [ 32.512520] registered taskstats version 1 [ 32.512662] Magic number: 4:130:187 [ 32.512753] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 32.512838] EDD information not available. [ 32.513014] Freeing unused kernel memory: 368k freed [ 32.626056] fuse init (API version 7.9) [ 32.638256] ACPI: Processor [CPU0] (supports 8 throttling states) [ 32.638471] ACPI: SSDT 7FEE8400, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 32.638732] ACPI: Processor [CPU1] (supports 8 throttling states) [ 32.638883] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126] [ 32.639079] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126] [ 32.784911] usbcore: registered new interface driver usbfs [ 32.785007] usbcore: registered new interface driver hub [ 32.785295] usbcore: registered new device driver usb [ 32.791305] USB Universal Host Controller Interface driver v3.0 [ 32.791421] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 32.791579] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 32.791581] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 32.791773] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 32.791916] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d000 [ 32.792062] usb usb1: configuration #1 chosen from 1 choice [ 32.792157] hub 1-0:1.0: USB hub found [ 32.792235] hub 1-0:1.0: 2 ports detected [ 32.829044] SCSI subsystem initialized [ 32.840067] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 32.840398] libata version 3.00 loaded. [ 32.895182] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19 [ 32.895342] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 32.895344] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 32.895438] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 32.895581] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000d100 [ 32.895723] usb usb2: configuration #1 chosen from 1 choice [ 32.895818] hub 2-0:1.0: USB hub found [ 32.895895] hub 2-0:1.0: 2 ports detected [ 32.999037] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 32.999195] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 32.999198] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 32.999290] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 32.999431] uhci_hcd 0000:00:1a.2: irq 20, io base 0x0000d500 [ 32.999573] usb usb3: configuration #1 chosen from 1 choice [ 32.999668] hub 3-0:1.0: USB hub found [ 32.999746] hub 3-0:1.0: 2 ports detected [ 33.102916] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 33.103080] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 33.103083] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 33.103175] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 33.103315] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000d200 [ 33.103454] usb usb4: configuration #1 chosen from 1 choice [ 33.103549] hub 4-0:1.0: USB hub found [ 33.103627] hub 4-0:1.0: 2 ports detected [ 33.206777] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 33.206935] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 33.206937] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 33.207029] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 33.207170] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d300 [ 33.207310] usb usb5: configuration #1 chosen from 1 choice [ 33.207404] hub 5-0:1.0: USB hub found [ 33.207482] hub 5-0:1.0: 2 ports detected [ 33.310663] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 33.310826] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 33.310828] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 33.310920] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 33.311059] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d400 [ 33.311197] usb usb6: configuration #1 chosen from 1 choice [ 33.311294] hub 6-0:1.0: USB hub found [ 33.311372] hub 6-0:1.0: 2 ports detected [ 33.366520] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 33.414628] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20 [ 33.414788] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 33.414790] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 33.414884] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 33.418886] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 33.418889] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc101000 [ 33.494356] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.494533] usb usb7: configuration #1 chosen from 1 choice [ 33.496200] hub 7-0:1.0: USB hub found [ 33.496278] hub 7-0:1.0: 6 ports detected [ 33.598276] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 [ 33.598438] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 33.598440] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 33.598533] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 33.602530] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 33.602532] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc100000 [ 33.618195] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.618370] usb usb8: configuration #1 chosen from 1 choice [ 33.618466] hub 8-0:1.0: USB hub found [ 33.618544] hub 8-0:1.0: 6 ports detected [ 33.726187] 8139cp 0000:06:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 33.726316] 8139cp 0000:06:00.0: Try the "8139too" driver instead. [ 33.726413] ahci 0000:04:00.0: version 3.0 [ 33.726429] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 33.727719] 8139too Fast Ethernet driver 0.9.28 [ 33.889848] usb 2-2: device not accepting address 2, error -71 [ 34.426158] usb 7-4: new high speed USB device using ehci_hcd and address 3 [ 34.562136] usb 7-4: configuration #1 chosen from 1 choice [ 34.562454] hub 7-4:1.0: USB hub found [ 34.563069] hub 7-4:1.0: 4 ports detected [ 34.724792] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 34.724926] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 34.725020] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 34.725108] scsi0 : ahci [ 34.725247] scsi1 : ahci [ 34.725348] ata1: SATA max UDMA/133 abar m8192@0xfc000000 port 0xfc000100 irq 17 [ 34.725473] ata2: SATA max UDMA/133 abar m8192@0xfc000000 port 0xfc000180 irq 17 [ 34.904540] usb 2-1: new full speed USB device using uhci_hcd and address 4 [ 35.089994] usb 2-1: configuration #1 chosen from 1 choice [ 35.292284] usb 7-4.3: new low speed USB device using ehci_hcd and address 4 [ 35.363955] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 35.365233] ata1.00: HPA unlocked: 488395055 -> 488397168, native 488397168 [ 35.365327] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133 [ 35.365413] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 35.366203] ata1.00: configured for UDMA/133 [ 35.389097] usb 7-4.3: configuration #1 chosen from 1 choice [ 35.587913] usb 7-4.4: new full speed USB device using ehci_hcd and address 5 [ 35.685185] ata2: SATA link down (SStatus 0 SControl 300) [ 35.685347] scsi 0:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 [ 35.685471] usb 7-4.4: configuration #1 chosen from 1 choice [ 35.686438] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 20 (level, low) -> IRQ 22 [ 35.686503] usbcore: registered new interface driver hiddev [ 35.687205] eth0: RealTek RTL8139 at 0xc000, 00:0b:2b:0a:32:a3, IRQ 22 [ 35.687294] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 35.688024] r8169 Gigabit Ethernet driver 2.2LK loaded [ 35.688120] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 35.688285] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 35.688466] eth1: RTL8168b/8111b at 0xf887e000, 00:1a:4d:57:dc:c3, XID 38000000 IRQ 218 [ 35.689684] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 [ 35.689854] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 35.689860] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 35.689956] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 17 [ 35.690119] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 35.690124] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 35.690230] PCI: Enabling device 0000:04:00.1 (0000 -> 0001) [ 35.690318] ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 35.690488] PCI: Setting latency timer of device 0000:04:00.1 to 64 [ 35.690496] ACPI: PCI interrupt for device 0000:04:00.1 disabled [ 35.694204] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input1 [ 35.697286] ata_piix 0000:00:1f.2: version 2.12 [ 35.697289] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 35.697532] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 [ 35.697702] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 35.702648] scsi2 : ata_piix [ 35.703981] scsi3 : ata_piix [ 35.704321] ata3: SATA max UDMA/133 cmd 0xd600 ctl 0xd700 bmdma 0xda00 irq 17 [ 35.704414] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd900 bmdma 0xda08 irq 17 [ 35.706336] Driver 'sd' needs updating - please use bus_type methods [ 35.706454] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 35.706551] sd 0:0:0:0: [sda] Write Protect is off [ 35.706633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.706641] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.706795] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 35.706892] sd 0:0:0:0: [sda] Write Protect is off [ 35.706973] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.706982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.707114] sda:<6>input,hidraw0: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.1-1 [ 35.715296] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.1/input/input2 [ 35.723033] sda1 sda2 sda3 sda4 <<6>input,hidraw1: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.1-1 [ 35.735500] input: HID 0566:3108 as /devices/pci0000:00/0000:00:1a.7/usb7/7-4/7-4.3/7-4.3:1.0/input/input3 [ 35.737668] sda5<6>input,hidraw2: USB HID v1.10 Keyboard [HID 0566:3108] on usb-0000:00:1a.7-4.3 [ 35.747689] sda6<6>input: HID 0566:3108 as /devices/pci0000:00/0000:00:1a.7/usb7/7-4/7-4.3/7-4.3:1.1/input/input4 [ 35.760462] input,hidraw3: USB HID v1.10 Device [HID 0566:3108] on usb-0000:00:1a.7-4.3 [ 35.762110] input: Elan USB Audio as /devices/pci0000:00/0000:00:1a.7/usb7/7-4/7-4.4/7-4.4:1.3/input/input5 [ 35.765645] sda7 > [ 35.765856] sd 0:0:0:0: [sda] Attached SCSI disk [ 35.768341] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 35.787442] input,hidraw4: USB HID v1.00 Device [Elan USB Audio] on usb-0000:00:1a.7-4.4 [ 35.787702] usbcore: registered new interface driver usbhid [ 35.787787] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 36.059217] ata4.00: HPA unlocked: 62502847 -> 62504960, native 62504960 [ 36.059309] ata4.00: ATA-7: MTRON MSP-SATA7535, 0.18R1H3, max UDMA/133 [ 36.059398] ata4.00: 62504960 sectors, multi 1: LBA [ 36.059481] ata4.00: applying bridge limits [ 36.079001] ata4.00: configured for UDMA/100 [ 36.079146] scsi 3:0:0:0: Direct-Access ATA MTRON MSP-SATA75 0.18 PQ: 0 ANSI: 5 [ 36.079313] sd 3:0:0:0: [sdb] 62504960 512-byte hardware sectors (32003 MB) [ 36.079409] sd 3:0:0:0: [sdb] Write Protect is off [ 36.079491] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 36.079504] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.079657] sd 3:0:0:0: [sdb] 62504960 512-byte hardware sectors (32003 MB) [ 36.079754] sd 3:0:0:0: [sdb] Write Protect is off [ 36.079835] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 36.079846] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.079977] sdb: sdb1 sdb2 [ 36.080322] sd 3:0:0:0: [sdb] Attached SCSI disk [ 36.080424] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 36.080518] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 36.080759] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 17 [ 36.080929] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 36.080946] scsi4 : ata_piix [ 36.081082] scsi5 : ata_piix [ 36.081405] ata5: SATA max UDMA/133 cmd 0xdd00 ctl 0xde00 bmdma 0xe100 irq 17 [ 36.081497] ata6: SATA max UDMA/133 cmd 0xdf00 ctl 0xe000 bmdma 0xe108 irq 17 [ 36.250970] ata5.00: HPA unlocked: 625140335 -> 625142448, native 625142448 [ 36.251062] ata5.00: ATA-7: SAMSUNG HD322HJ, 1AC01110, max UDMA7 [ 36.251149] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 36.259075] ata5.00: configured for UDMA/133 [ 36.425117] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5 [ 36.425276] sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) [ 36.425372] sd 4:0:0:0: [sdc] Write Protect is off [ 36.425453] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 36.425462] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.425610] sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) [ 36.425705] sd 4:0:0:0: [sdc] Write Protect is off [ 36.425786] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 36.425794] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.425925] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 > [ 36.471798] sd 4:0:0:0: [sdc] Attached SCSI disk [ 36.471893] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 36.472256] ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 36.472429] PCI: Setting latency timer of device 0000:04:00.1 to 64 [ 36.472621] scsi6 : pata_jmicron [ 36.473111] scsi7 : pata_jmicron [ 36.473437] ata7: PATA max UDMA/100 cmd 0xa000 ctl 0xa100 bmdma 0xa400 irq 16 [ 36.473529] ata8: PATA max UDMA/100 cmd 0xa200 ctl 0xa300 bmdma 0xa408 irq 16 [ 36.856321] Attempting manual resume [ 36.856397] swsusp: Resume From Partition 8:37 [ 36.856398] PM: Checking swsusp image. [ 36.856526] PM: Resume from disk failed. [ 38.125404] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 38.152599] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 38.253279] input: Power Button (FF) as /devices/virtual/input/input6 [ 38.277191] ACPI: Power Button (FF) [PWRF] [ 38.278869] input: Power Button (CM) as /devices/virtual/input/input7 [ 38.309150] ACPI: Power Button (CM) [PWRB] [ 38.532334] Linux agpgart interface v0.102 [ 38.655252] nvidia: module license 'NVIDIA' taints kernel. [ 38.972514] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.972679] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 38.972867] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 39.249864] udev: renamed network interface eth0 to eth1 [ 39.273954] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 39.288701] udev: renamed network interface eth1_rename to eth0 [ 39.291095] r8169: eth0: link up [ 39.291173] r8169: eth0: link up [ 39.300199] iTCO_vendor_support: vendor-support=0 [ 39.311867] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 39.312007] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 39.312134] iTCO_wdt: No card detected [ 39.410393] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 39.582177] usbcore: registered new interface driver snd-usb-audio [ 40.155006] loop: module loaded [ 40.176350] lp: driver loaded but no devices found [ 40.217835] it87: Found IT8718F chip at 0x290, revision 4 [ 40.217925] it87: in3 is VCC (+5V) [ 40.281783] Adding 1951856k swap on /dev/sdc5. Priority:-1 extents:1 across:1951856k [ 40.407874] NET: Registered protocol family 17 [ 40.524565] ip_tables: (C) 2000-2006 Netfilter Core Team [ 40.765305] No dock devices found. [ 41.221855] NET: Registered protocol family 10 [ 41.221972] lo: Disabled Privacy Extensions [ 41.245152] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 41.245154] apm: disabled - APM is not SMP safe. [ 50.245901] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/usb/usbaudio.c:1345: 5:1:1: usb_set_interface failed [ 50.249019] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/usb/usbaudio.c:1345: 5:1:1: usb_set_interface failed [ 50.260883] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/usb/usbaudio.c:1345: 5:2:1: usb_set_interface failed [ 50.264129] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/usb/usbaudio.c:1345: 5:2:1: usb_set_interface failed [ 51.627773] eth0: no IPv6 routers present [ 52.190231] eth1: no IPv6 routers present