[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003feec000 (ACPI data) [ 0.000000] BIOS-e820: 000000003feec000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] modified: 000000003fee0000 - 000000003feec000 (ACPI data) [ 0.000000] modified: 000000003feec000 - 000000003ff00000 (ACPI NVS) [ 0.000000] modified: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] modified: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37857000 - 37fef280 [ 0.000000] Allocated new RAMDISK: 008de000 - 01076280 [ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fef27f to 008de000 - 0107627f [ 0.000000] ACPI: RSDP 000f6020 00014 (v00 ACER ) [ 0.000000] ACPI: RSDT 3fee52ed 00030 (v01 ACER TM8000 20020131 LTP 00000000) [ 0.000000] ACPI: FACP 3feebf2c 00074 (v01 ACER TM8000 20020131 PTL 00000050) [ 0.000000] ACPI: DSDT 3fee531d 06C0F (v01 ACER TM8000 20020131 MSFT 0100000E) [ 0.000000] ACPI: FACS 3fefcfc0 00040 [ 0.000000] ACPI: HPET 3feebfa0 00038 (v01 ACER TM8000 20020131 PTL 00000000) [ 0.000000] ACPI: BOOT 3feebfd8 00028 (v01 ACER TM8000 20020131 LTP 00000001) [ 0.000000] 134MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd170] BRK ==> [00008da000 - 00008dd170] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008de000 - 0001076280] NEW RAMDISK ==> [00008de000 - 0001076280] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fee0 [ 0.000000] On node 0 totalpages: 261755 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1078000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 270 pages used for memmap [ 0.000000] HighMem zone: 34260 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec10000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u4194304 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259709 [ 0.000000] Kernel command line: root=/dev/sda7 ro nohz=off quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5237120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fee0) [ 0.000000] Memory: 1016496k/1047424k available (4673k kernel code, 30048k reserved, 2121k data, 656k init, 138120k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1993.611 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3987.22 BogoMIPS (lpj=7974444) [ 0.004023] Security Framework initialized [ 0.004048] AppArmor: AppArmor initialized [ 0.004055] Mount-cache hash table entries: 512 [ 0.004179] Initializing cgroup subsys ns [ 0.004183] Initializing cgroup subsys cpuacct [ 0.004188] Initializing cgroup subsys memory [ 0.004197] Initializing cgroup subsys devices [ 0.004200] Initializing cgroup subsys freezer [ 0.004202] Initializing cgroup subsys net_cls [ 0.004226] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004229] CPU: L2 cache: 2048K [ 0.004233] mce: CPU supports 5 MCE banks [ 0.008009] Performance Events: [ 0.008012] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.008014] no hardware sampling interrupt available. [ 0.008017] p6 PMU driver. [ 0.008022] ... version: 0 [ 0.008024] ... bit width: 32 [ 0.008026] ... generic registers: 2 [ 0.008028] ... value mask: 00000000ffffffff [ 0.008030] ... max period: 000000007fffffff [ 0.008032] ... fixed-purpose events: 0 [ 0.008034] ... event mask: 0000000000000003 [ 0.008038] Checking 'hlt' instruction... OK. [ 0.024813] SMP alternatives: switching to UP code [ 0.031657] Freeing SMP alternatives: 19k freed [ 0.031666] ACPI: Core revision 20090903 [ 0.042493] ACPI: setting ELCR to 0200 (from 0440) [ 0.044008] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044013] ftrace: allocating 21771 entries in 43 pages [ 0.048075] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.048080] weird, boot CPU (#0) not listed by the BIOS. [ 0.048082] SMP motherboard not detected. [ 0.048085] Local APIC not detected. Using dummy APIC emulation. [ 0.048087] SMP disabled [ 0.048209] Brought up 1 CPUs [ 0.048212] Total of 1 processors activated (3987.22 BogoMIPS). [ 0.049547] CPU0 attaching NULL sched-domain. [ 0.049706] devtmpfs: initialized [ 0.050057] regulator: core version 0.5 [ 0.050077] Time: 20:37:32 Date: 05/24/10 [ 0.050121] NET: Registered protocol family 16 [ 0.050237] EISA bus registered [ 0.050246] ACPI: bus type pci registered [ 0.052505] PCI: PCI BIOS revision 2.10 entry at 0xfd732, last bus=2 [ 0.052508] PCI: Using configuration type 1 for base access [ 0.053420] bio: create slab at 0 [ 0.054092] ACPI: EC: Look up EC in DSDT [ 0.057917] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.168046] ACPI: Interpreter enabled [ 0.168052] ACPI: (supports S0 S3 S4 S5) [ 0.168070] ACPI: Using PIC for interrupt routing [ 0.244339] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.244395] ACPI: Power Resource [PFN0] (off) [ 0.244427] ACPI: Power Resource [PFN1] (off) [ 0.244960] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.245570] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.245608] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.245760] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.245806] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.245853] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.245906] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff] [ 0.245956] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.245961] pci 0000:00:1d.7: PME# disabled [ 0.246037] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.246041] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.246062] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.246068] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.246075] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.246081] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.246088] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] [ 0.246094] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.246139] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] [ 0.246176] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] [ 0.246182] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] [ 0.246188] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0000c00-0xd0000dff] [ 0.246195] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0000800-0xd00008ff] [ 0.246220] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.246224] pci 0000:00:1f.5: PME# disabled [ 0.246249] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.246255] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.246287] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.246291] pci 0000:00:1f.6: PME# disabled [ 0.246323] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.246329] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] [ 0.246335] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff] [ 0.246348] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.246365] pci 0000:01:00.0: supports D1 D2 [ 0.246395] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] [ 0.246398] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] [ 0.246402] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.246452] pci 0000:02:02.0: reg 10 64bit mmio: [0xd0200000-0xd020ffff] [ 0.246497] pci 0000:02:02.0: PME# supported from D3hot D3cold [ 0.246501] pci 0000:02:02.0: PME# disabled [ 0.246532] pci 0000:02:04.0: reg 10 32bit mmio: [0xd0214000-0xd0214fff] [ 0.246570] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold [ 0.246574] pci 0000:02:04.0: PME# disabled [ 0.246603] pci 0000:02:06.0: reg 10 32bit mmio: [0xd0215000-0xd0215fff] [ 0.246619] pci 0000:02:06.0: supports D1 D2 [ 0.246622] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246626] pci 0000:02:06.0: PME# disabled [ 0.246654] pci 0000:02:06.1: reg 10 32bit mmio: [0xd0216000-0xd0216fff] [ 0.246670] pci 0000:02:06.1: supports D1 D2 [ 0.246673] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246677] pci 0000:02:06.1: PME# disabled [ 0.246705] pci 0000:02:06.2: reg 10 32bit mmio: [0xd0217000-0xd0217fff] [ 0.246744] pci 0000:02:06.2: supports D1 D2 [ 0.246746] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246750] pci 0000:02:06.2: PME# disabled [ 0.246779] pci 0000:02:06.3: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.246795] pci 0000:02:06.3: supports D1 D2 [ 0.246797] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246801] pci 0000:02:06.3: PME# disabled [ 0.246833] pci 0000:02:07.0: reg 10 32bit mmio: [0xd0218000-0xd02187ff] [ 0.246840] pci 0000:02:07.0: reg 14 32bit mmio: [0xd0210000-0xd0213fff] [ 0.246874] pci 0000:02:07.0: supports D1 D2 [ 0.246876] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot [ 0.246880] pci 0000:02:07.0: PME# disabled [ 0.246909] pci 0000:00:1e.0: transparent bridge [ 0.246913] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff] [ 0.246917] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xd07fffff] [ 0.246967] pci_bus 0000:00: on NUMA node 0 [ 0.246971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.247110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.247130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.249583] ACPI: PCI Interrupt Link [LNKA] (IRQs *6) [ 0.249680] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.249774] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 0.249868] ACPI: PCI Interrupt Link [LNKD] (IRQs *6) [ 0.249961] ACPI: PCI Interrupt Link [LNKE] (IRQs *10) [ 0.250055] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. [ 0.250150] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled. [ 0.250245] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 0.250340] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.250345] vgaarb: loaded [ 0.250462] SCSI subsystem initialized [ 0.250501] libata version 3.00 loaded. [ 0.250565] usbcore: registered new interface driver usbfs [ 0.250577] usbcore: registered new interface driver hub [ 0.250605] usbcore: registered new device driver usb [ 0.250722] ACPI: WMI: Mapper loaded [ 0.250724] PCI: Using ACPI for IRQ routing [ 0.250863] NetLabel: Initializing [ 0.250865] NetLabel: domain hash size = 128 [ 0.250867] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.250880] NetLabel: unlabeled traffic allowed by default [ 0.250910] Switching to clocksource tsc [ 0.251996] AppArmor: AppArmor Filesystem Enabled [ 0.251996] pnp: PnP ACPI init [ 0.251996] ACPI: bus type pnp registered [ 0.533110] pnp: PnP ACPI: found 11 devices [ 0.533112] ACPI: ACPI bus type pnp unregistered [ 0.533116] PnPBIOS: Disabled by ACPI PNP [ 0.533128] system 00:04: ioport range 0x600-0x60f has been reserved [ 0.533131] system 00:04: ioport range 0x700-0x70f has been reserved [ 0.533135] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.533138] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.533141] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 0.533144] system 00:04: ioport range 0x1c0-0x1cf has been reserved [ 0.533147] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.533151] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.533154] system 00:04: ioport range 0x610-0x61f has been reserved [ 0.533157] system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved [ 0.533161] system 00:04: iomem range 0xff800000-0xffbfffff has been reserved [ 0.533164] system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.533167] system 00:04: iomem range 0x0-0x9ffff could not be reserved [ 0.533171] system 00:04: iomem range 0xe0000-0xfffff could not be reserved [ 0.533174] system 00:04: iomem range 0xdf800-0xdffff could not be reserved [ 0.567847] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.567851] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.567855] pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff [ 0.567859] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff [ 0.567873] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.567876] pci 0000:02:06.0: IO window: 0x004000-0x0040ff [ 0.567880] pci 0000:02:06.0: IO window: 0x004400-0x0044ff [ 0.567884] pci 0000:02:06.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.567889] pci 0000:02:06.0: MEM window: 0x50000000-0x53ffffff [ 0.567893] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:07 [ 0.567896] pci 0000:02:06.1: IO window: 0x004800-0x0048ff [ 0.567900] pci 0000:02:06.1: IO window: 0x004c00-0x004cff [ 0.567904] pci 0000:02:06.1: PREFETCH window: 0x44000000-0x47ffffff [ 0.567909] pci 0000:02:06.1: MEM window: 0x54000000-0x57ffffff [ 0.567913] pci 0000:02:06.3: CardBus bridge, secondary bus 0000:0b [ 0.567915] pci 0000:02:06.3: IO window: 0x001400-0x0014ff [ 0.567919] pci 0000:02:06.3: IO window: 0x002800-0x0028ff [ 0.567924] pci 0000:02:06.3: PREFETCH window: 0x48000000-0x4bffffff [ 0.567928] pci 0000:02:06.3: MEM window: 0x58000000-0x5bffffff [ 0.567932] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.567936] pci 0000:00:1e.0: IO window: 0x4000-0x4fff [ 0.567941] pci 0000:00:1e.0: MEM window: 0xd0200000-0xd07fffff [ 0.567946] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x4bffffff [ 0.567961] pci 0000:00:1e.0: setting latency timer to 64 [ 0.568114] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6 [ 0.568116] PCI: setting IRQ 6 as level-triggered [ 0.568121] pci 0000:02:06.0: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 0.568131] pci 0000:02:06.1: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 0.568140] pci 0000:02:06.3: enabling device (0080 -> 0083) [ 0.568145] pci 0000:02:06.3: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 0.568150] pci 0000:02:06.3: setting latency timer to 64 [ 0.568155] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.568158] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.568161] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] [ 0.568163] pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff] [ 0.568166] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] [ 0.568169] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] [ 0.568172] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xd07fffff] [ 0.568175] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x4bffffff] [ 0.568177] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.568180] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.568183] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff] [ 0.568186] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff] [ 0.568188] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.568191] pci_bus 0000:03: resource 3 mem: [0x50000000-0x53ffffff] [ 0.568194] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff] [ 0.568197] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff] [ 0.568199] pci_bus 0000:07: resource 2 pref mem [0x44000000-0x47ffffff] [ 0.568202] pci_bus 0000:07: resource 3 mem: [0x54000000-0x57ffffff] [ 0.568205] pci_bus 0000:0b: resource 0 io: [0x1400-0x14ff] [ 0.568208] pci_bus 0000:0b: resource 1 io: [0x2800-0x28ff] [ 0.568211] pci_bus 0000:0b: resource 2 pref mem [0x48000000-0x4bffffff] [ 0.568213] pci_bus 0000:0b: resource 3 mem: [0x58000000-0x5bffffff] [ 0.568241] NET: Registered protocol family 2 [ 0.568324] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.568625] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.569508] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.570117] TCP: Hash tables configured (established 131072 bind 65536) [ 0.570120] TCP reno registered [ 0.570253] NET: Registered protocol family 1 [ 0.570348] pci 0000:01:00.0: Boot video device [ 0.570476] Simple Boot Flag at 0x37 set to 0x1 [ 0.570566] cpufreq-nforce2: No nForce2 chipset. [ 0.570592] Scanning for low memory corruption every 60 seconds [ 0.570738] audit: initializing netlink socket (disabled) [ 0.570758] type=2000 audit(1274733452.569:1): initialized [ 0.581212] Trying to unpack rootfs image as initramfs... [ 0.593474] highmem bounce pool size: 64 pages [ 0.593482] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.601285] VFS: Disk quotas dquot_6.5.2 [ 0.601373] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.602017] fuse init (API version 7.13) [ 0.602104] msgmni has been set to 1716 [ 0.602324] alg: No test for stdrng (krng) [ 0.602380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.602383] io scheduler noop registered [ 0.602385] io scheduler anticipatory registered [ 0.602387] io scheduler deadline registered [ 0.602426] io scheduler cfq registered (default) [ 0.602561] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.602585] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.619647] ACPI: AC Adapter [ACAD] (off-line) [ 0.619765] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.633308] ACPI: Lid Switch [LID] [ 0.633406] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.633410] ACPI: Sleep Button [SLPB] [ 0.633459] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.633462] ACPI: Power Button [PWRF] [ 0.633622] fan PNP0C0B:00: registered as cooling_device0 [ 0.633628] ACPI: Fan [FAN0] (off) [ 0.633729] fan PNP0C0B:01: registered as cooling_device1 [ 0.633735] ACPI: Fan [FAN1] (off) [ 0.633880] Marking TSC unstable due to TSC halts in idle [ 0.633919] processor LNXCPU:00: registered as cooling_device2 [ 0.641123] Switching to clocksource acpi_pm [ 0.704306] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.704320] ACPI: Thermal Zone [THRM] (33 C) [ 0.705947] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.706043] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.706117] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 0.706464] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.706730] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 0.706734] PCI: setting IRQ 10 as level-triggered [ 0.706739] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.706747] serial 0000:00:1f.6: PCI INT B disabled [ 0.707743] brd: module loaded [ 0.712583] loop: module loaded [ 0.712693] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.712820] ata_piix 0000:00:1f.1: version 2.13 [ 0.712843] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 0.712850] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.712858] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 0.712905] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.713039] scsi0 : ata_piix [ 0.713135] isapnp: Scanning for PnP cards... [ 0.718643] scsi1 : ata_piix [ 0.719661] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 0.719664] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 0.720070] Fixed MDIO Bus: probed [ 0.720107] PPP generic driver version 2.4.2 [ 0.720168] tun: Universal TUN/TAP device driver, 1.6 [ 0.720170] tun: (C) 1999-2004 Max Krasnyansky [ 0.720255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.720431] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 0.720435] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 0.720454] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.720458] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.720495] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.720526] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.724422] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.732176] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000 [ 0.792308] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.792484] usb usb1: configuration #1 chosen from 1 choice [ 0.792517] hub 1-0:1.0: USB hub found [ 0.792530] hub 1-0:1.0: 6 ports detected [ 0.792605] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.792625] uhci_hcd: USB Universal Host Controller Interface driver [ 0.792906] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 [ 0.792911] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 0.792922] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.792926] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.792979] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.793007] uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800 [ 0.793107] usb usb2: configuration #1 chosen from 1 choice [ 0.793134] hub 2-0:1.0: USB hub found [ 0.793141] hub 2-0:1.0: 2 ports detected [ 0.793331] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6 [ 0.793334] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 0.793340] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.793344] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.793375] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.793395] uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820 [ 0.793483] usb usb3: configuration #1 chosen from 1 choice [ 0.793509] hub 3-0:1.0: USB hub found [ 0.793515] hub 3-0:1.0: 2 ports detected [ 0.793554] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 0.793561] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.793564] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.793600] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.793620] uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840 [ 0.793716] usb usb4: configuration #1 chosen from 1 choice [ 0.793740] hub 4-0:1.0: USB hub found [ 0.793747] hub 4-0:1.0: 2 ports detected [ 0.793840] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 [ 0.795680] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.800219] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.800229] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.800272] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.800294] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.800315] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.800458] mice: PS/2 mouse device common for all mice [ 0.800648] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.800666] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.800807] device-mapper: uevent: version 1.0.3 [ 0.800933] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.803827] device-mapper: multipath: version 1.1.0 loaded [ 0.803830] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.803993] EISA: Probing bus 0 at eisa.0 [ 0.804042] Cannot allocate resource for EISA slot 1 [ 0.804045] Cannot allocate resource for EISA slot 2 [ 0.804048] Cannot allocate resource for EISA slot 3 [ 0.804050] Cannot allocate resource for EISA slot 4 [ 0.804066] EISA: Detected 0 cards. [ 0.808151] cpuidle: using governor ladder [ 0.808212] cpuidle: using governor menu [ 0.808680] TCP cubic registered [ 0.808849] NET: Registered protocol family 10 [ 0.809311] lo: Disabled Privacy Extensions [ 0.809610] NET: Registered protocol family 17 [ 0.809869] Using IPI No-Shortcut mode [ 0.809973] PM: Resume from disk failed. [ 0.809988] registered taskstats version 1 [ 0.810258] Magic number: 10:500:650 [ 0.810369] rtc_cmos 00:01: setting system clock to 2010-05-24 20:37:32 UTC (1274733452) [ 0.810373] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.810375] EDD information not available. [ 0.878899] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.892610] ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100 [ 0.892615] ata1.00: 488397168 sectors, multi 16: LBA48 [ 0.908354] ata1.00: configured for UDMA/100 [ 0.974936] Freeing initrd memory: 7776k freed [ 1.205029] isapnp: No Plug & Play device found [ 1.205056] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 1.205278] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVE-0 01.0 PQ: 0 ANSI: 5 [ 1.205491] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.205610] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.205659] sd 0:0:0:0: [sda] Write Protect is off [ 1.205662] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.205686] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.205835] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4 [ 1.308451] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.336435] usb 1-6: configuration #1 chosen from 1 choice [ 1.336512] hub 1-6:1.0: USB hub found [ 1.336611] hub 1-6:1.0: 4 ports detected [ 1.860062] ACPI: Battery Slot [BAT2] (battery absent) [ 1.884407] ata2.00: ATAPI: MATSHITADVD-RAM UJ-831S, 1.50, max UDMA/33 [ 1.900318] ata2.00: configured for UDMA/33 [ 1.911595] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-831S 1.50 PQ: 0 ANSI: 5 [ 1.922151] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.922155] Uniform CD-ROM driver Revision: 3.20 [ 1.922248] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.922299] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.922343] Freeing unused kernel memory: 656k freed [ 1.922801] Write protecting the kernel text: 4676k [ 1.922837] Write protecting the kernel read-only data: 1840k [ 1.938340] udev: starting version 151 [ 2.056245] ACPI: Battery Slot [BAT1] (battery present) [ 2.151071] tg3.c:v3.102 (September 1, 2009) [ 2.151095] tg3 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 2.231752] eth0: Tigon3 [partno(BCM95705A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:c0:9f:47:a0:23 [ 2.231757] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0]) [ 2.231760] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.231762] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 2.231790] ohci1394 0000:02:07.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 2.284073] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0218000-d02187ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.771596] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 3.556149] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00001e3f93] [ 22.747614] Adding 1534168k swap on /dev/sda8. Priority:-1 extents:1 across:1534168k [ 22.788854] udev: starting version 151 [ 22.857490] lp: driver loaded but no devices found [ 22.957629] parport_pc 00:08: reported by Plug and Play ACPI [ 22.957724] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 22.961620] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input5 [ 22.961744] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 22.963885] irda_init() [ 22.963901] NET: Registered protocol family 23 [ 22.986955] ppdev: user-space parallel port driver [ 23.048275] lp0: using parport0 (interrupt-driven). [ 23.048584] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 23.048619] nsc-ircc, chip->init [ 23.048628] nsc-ircc, Found chip at base=0x04e [ 23.048651] nsc-ircc, driver loaded (Dag Brattli) [ 23.048656] nsc_ircc_open(), can't get iobase of 0x2f8 [ 23.048684] nsc-ircc, Found chip at base=0x04e [ 23.048706] nsc-ircc, driver loaded (Dag Brattli) [ 23.048709] nsc_ircc_open(), can't get iobase of 0x2f8 [ 23.048943] nsc-ircc 00:0a: disabled [ 23.259634] acer-wmi: Acer Laptop ACPI-WMI Extras [ 23.259649] acer-wmi: No or unsupported WMI interface, unable to load [ 23.259916] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.263921] Linux agpgart interface v0.103 [ 23.271434] intel_rng: FWH not detected [ 23.316530] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 23.388939] lib80211: common routines for IEEE802.11 drivers [ 23.388944] lib80211_crypt: registered algorithm 'NULL' [ 23.421192] type=1505 audit(1274726275.110:2): operation="profile_load" pid=546 name="/sbin/dhclient3" [ 23.421800] type=1505 audit(1274726275.110:3): operation="profile_load" pid=546 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 23.422129] type=1505 audit(1274726275.110:4): operation="profile_load" pid=546 name="/usr/lib/connman/scripts/dhclient-script" [ 23.426598] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 23.457817] [drm] Initialized drm 1.1.0 20060810 [ 23.486375] yenta_cardbus 0000:02:06.0: CardBus bridge found [1025:0051] [ 23.486394] yenta_cardbus 0000:02:06.0: O2: res at 0x94/0xD4: ea/00 [ 23.486397] yenta_cardbus 0000:02:06.0: O2: enabling read prefetch/write burst [ 23.494129] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 23.494133] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 23.535698] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 23.535702] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 23.603800] [drm] radeon defaulting to kernel modesetting. [ 23.603804] [drm] radeon kernel modesetting enabled. [ 23.603875] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 23.603887] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 23.612614] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0838, PCI irq 6 [ 23.612619] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 23.612624] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 23.612635] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 23.612640] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean. [ 23.612872] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff [ 23.612876] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x4bffffff [ 23.614617] [drm] radeon: Initializing kernel modesetting. [ 23.618276] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 23.618283] ipw2200 0000:02:04.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 23.619362] [drm] register mmio base: 0xD0100000 [ 23.619365] [drm] register mmio size: 65536 [ 23.620719] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 23.620738] [drm] Generation 2 PCI interface, using max accessible memory [ 23.620748] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 23.620764] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 23.620797] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 23.620834] [drm] radeon: VRAM 128M [ 23.620837] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 23.620838] [drm] radeon: GTT 256M [ 23.620841] [drm] radeon: GTT from 0xE0000000 to 0xEFFFFFFF [ 23.620862] [drm] radeon: irq initialized. [ 23.621630] [drm] Detected VRAM RAM=128M, BAR=128M [ 23.621634] [drm] RAM width 128bits DDR [ 23.622725] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 23.622772] ipw2200 0000:02:04.0: firmware: requesting ipw2200-bss.fw [ 23.623006] [TTM] Zone kernel: Available graphics memory: 443652 kiB. [ 23.623009] [TTM] Zone highmem: Available graphics memory: 512712 kiB. [ 23.623027] [drm] radeon: 128M of VRAM memory ready [ 23.623029] [drm] radeon: 256M of GTT memory ready. [ 23.623265] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 23.623274] [drm] radeon: cp idle (0x10000C03) [ 23.623331] [drm] Loading R300 Microcode [ 23.623549] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 23.657823] [drm] radeon: ring at 0x00000000E0000000 [ 23.657847] [drm] ring test succeeded in 1 usecs [ 23.668369] [drm] radeon: ib pool ready. [ 23.668456] [drm] ib test succeeded in 0 usecs [ 23.669399] [drm] DFP table revision: 4 [ 23.669981] [drm] Panel ID String: IDT [ 23.669984] [drm] Panel Size 1400x1050 [ 23.670129] [drm] Default TV standard: NTSC [ 23.670131] [drm] 27.000000000 MHz TV ref clk [ 23.670134] [drm] Default TV standard: NTSC [ 23.670135] [drm] 27.000000000 MHz TV ref clk [ 23.670254] [drm] Radeon Display Connectors [ 23.670256] [drm] Connector 0: [ 23.670258] [drm] VGA [ 23.670261] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 23.670263] [drm] Encoders: [ 23.670265] [drm] CRT1: INTERNAL_DAC1 [ 23.670266] [drm] Connector 1: [ 23.670268] [drm] DVI-D [ 23.670269] [drm] HPD1 [ 23.670272] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 23.670273] [drm] Encoders: [ 23.670275] [drm] DFP1: INTERNAL_TMDS1 [ 23.670277] [drm] Connector 2: [ 23.670278] [drm] LVDS [ 23.670280] [drm] Encoders: [ 23.670281] [drm] LCD1: INTERNAL_LVDS [ 23.670283] [drm] Connector 3: [ 23.670284] [drm] S-video [ 23.670286] [drm] Encoders: [ 23.670287] [drm] TV1: INTERNAL_DAC2 [ 23.815398] [drm] fb mappable at 0xD8040000 [ 23.815402] [drm] vram apper at 0xD8000000 [ 23.815404] [drm] size 5913600 [ 23.815405] [drm] fb depth is 24 [ 23.815407] [drm] pitch is 5632 [ 23.898176] ipw2200: Radio Frequency Kill Switch is On: [ 23.898179] Kill switch must be turned off for wireless networking to work. [ 23.913503] fb0: radeondrmfb frame buffer device [ 23.913507] registered panic notifier [ 23.913515] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 23.920323] vga16fb: initializing [ 23.920327] vga16fb: mapped to 0xc00a0000 [ 23.920332] vga16fb: not registering due to another framebuffer present [ 23.926718] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 23.926759] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 24.006654] Console: switching to colour frame buffer device 175x65 [ 24.039125] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 24.039185] yenta_cardbus 0000:02:06.1: CardBus bridge found [1025:0051] [ 24.164603] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0838, PCI irq 6 [ 24.164607] yenta_cardbus 0000:02:06.1: Socket status: 30000006 [ 24.164612] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 24.164624] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 24.164628] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x4fff: clean. [ 24.164860] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff [ 24.164863] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x4bffffff [ 24.166616] yenta_cardbus 0000:02:06.3: CardBus bridge found [1025:0051] [ 24.215373] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 [ 24.267423] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 24.292619] yenta_cardbus 0000:02:06.3: ISA IRQ mask 0x0838, PCI irq 6 [ 24.292624] yenta_cardbus 0000:02:06.3: Socket status: 30000410 [ 24.292628] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #0a to #0e [ 24.292639] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 24.292643] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x4000-0x4fff: clean. [ 24.292875] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff [ 24.292878] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x4bffffff [ 24.457544] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 24.760032] intel8x0_measure_ac97_clock: measured 55422 usecs (2671 samples) [ 24.760036] intel8x0: clocking to 48000 [ 24.928031] pcmcia_socket pcmcia_socket2: pccard: PCMCIA card inserted into slot 2 [ 25.076029] pcmcia_socket pcmcia_socket2: cs: memory probe 0xd0200000-0xd07fffff: excluding 0xd0200000-0xd025ffff [ 25.091870] pcmcia 2.0: pcmcia: registering new device pcmcia2.0 [ 25.511057] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 25.512620] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 25.513288] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 25.513849] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 25.514564] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 25.515982] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: clean. [ 25.517522] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: clean. [ 25.518177] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean. [ 25.518738] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean. [ 25.519450] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean. [ 25.520428] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 25.521941] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 25.522596] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 25.523159] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 25.523871] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 28.508231] type=1505 audit(1274726280.197:5): operation="profile_load" pid=800 name="/usr/share/gdm/guest-session/Xsession" [ 28.512578] type=1505 audit(1274726280.201:6): operation="profile_replace" pid=803 name="/sbin/dhclient3" [ 28.513196] type=1505 audit(1274726280.201:7): operation="profile_replace" pid=803 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 28.513532] type=1505 audit(1274726280.201:8): operation="profile_replace" pid=803 name="/usr/lib/connman/scripts/dhclient-script" [ 28.558036] type=1505 audit(1274726280.245:9): operation="profile_load" pid=806 name="/usr/bin/evince" [ 28.610675] type=1505 audit(1274726280.297:10): operation="profile_load" pid=806 name="/usr/bin/evince-previewer" [ 28.633374] tg3 0000:02:02.0: firmware: requesting tigon/tg3_tso5.bin [ 28.638053] type=1505 audit(1274726280.325:11): operation="profile_load" pid=806 name="/usr/bin/evince-thumbnailer" [ 28.968779] type=1505 audit(1274726280.657:12): operation="profile_load" pid=889 name="/usr/lib/cups/backend/cups-pdf" [ 28.969513] type=1505 audit(1274726280.657:13): operation="profile_load" pid=889 name="/usr/sbin/cupsd" [ 28.974281] type=1505 audit(1274726280.661:14): operation="profile_load" pid=890 name="/usr/sbin/mysqld-akonadi" [ 28.994045] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.173544] apm: BIOS not found. [ 31.498979] ttyS1: LSR safety check engaged! [ 52.950108] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 52.950112] tg3: eth0: Flow control is on for TX and on for RX. [ 52.950302] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 63.532021] eth0: no IPv6 routers present [ 796.176421] tg3 0000:02:02.0: PME# enabled [ 796.176457] tg3 0000:02:02.0: wake-up capability enabled by ACPI [ 796.976224] PM: Syncing filesystems ... done. [ 797.008440] PM: Preparing system for mem sleep [ 797.008445] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 797.010631] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 797.010694] PM: Entering mem sleep [ 797.010709] Suspending console(s) (use no_console_suspend to debug) [ 797.011065] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 797.075828] sd 0:0:0:0: [sda] Stopping disk [ 797.480675] PM: suspend of drv:sd dev:0:0:0:0 complete after 469.607 msecs [ 797.905993] PM: suspend of drv:psmouse dev:serio4 complete after 425.271 msecs [ 798.120023] PM: suspend of drv:atkbd dev:serio0 complete after 214.020 msecs [ 798.121271] serial 00:09: disabled [ 798.121489] parport_pc 00:08: disabled [ 798.136035] eth1: Going into suspend... [ 798.136067] ipw2200 0000:02:04.0: PCI INT A disabled [ 798.675259] radeon 0000:01:00.0: PCI INT A disabled [ 798.688023] __ratelimit: 3 callbacks suppressed [ 798.688025] radeon 0000:01:00.0: Refused to change power state, currently in D0 [ 798.688090] radeon 0000:01:00.0: power state changed by ACPI to D3 [ 798.688102] PM: suspend of drv:radeon dev:0000:01:00.0 complete after 536.038 msecs [ 798.688303] Intel ICH 0000:00:1f.5: PCI INT B disabled [ 798.688486] ata_piix 0000:00:1f.1: PCI INT A disabled [ 798.688530] ata_piix 0000:00:1f.1: power state changed by ACPI to D3 [ 798.688545] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 798.688553] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 798.688561] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 798.688568] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 798.984257] PM: suspend of drv:fan dev:PNP0C0B:01 complete after 295.664 msecs [ 799.140257] PM: suspend of drv:fan dev:PNP0C0B:00 complete after 155.993 msecs [ 799.140366] PM: suspend of devices complete after 2129.458 msecs [ 799.140369] PM: suspend devices took 2.132 seconds [ 799.156335] PM: late suspend of devices complete after 15.962 msecs [ 799.157107] ACPI: Preparing to enter system sleep state S3 [ 799.940141] Disabling non-boot CPUs ... [ 799.940161] Back to C! [ 799.940161] ACPI: Waking up from system sleep state S3 [ 800.034098] ipw2200: Unable to load ucode: -22 [ 800.034115] ipw2200: Unable to load firmware: -22 [ 800.034117] ipw2200: Failed to up device [ 800.112204] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 800.112228] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 800.112251] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 800.112283] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900102) [ 800.112306] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x4bf04000) [ 800.112311] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22804040, writing 0x2804040) [ 800.112321] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x80800105, writing 0x80800107) [ 800.112572] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 800.112577] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 800.112587] ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x4c000000) [ 800.112627] Intel ICH 0000:00:1f.5: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 800.112637] Intel ICH 0000:00:1f.5: restoring config space at offset 0x7 (was 0x0, writing 0xd0000800) [ 800.112641] Intel ICH 0000:00:1f.5: restoring config space at offset 0x6 (was 0x0, writing 0xd0000c00) [ 800.112646] Intel ICH 0000:00:1f.5: restoring config space at offset 0x5 (was 0x1301, writing 0x18c1) [ 800.112651] Intel ICH 0000:00:1f.5: restoring config space at offset 0x4 (was 0x1201, writing 0x1c01) [ 800.112657] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900003) [ 800.112672] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 800.112687] pci 0000:00:1f.6: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 800.112733] tg3 0000:02:02.0: restoring config space at offset 0xc (was 0x0, writing 0xfe6f0000) [ 800.112745] tg3 0000:02:02.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) [ 800.112751] tg3 0000:02:02.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00106) [ 800.112771] ipw2200 0000:02:04.0: restoring config space at offset 0xf (was 0x18030100, writing 0x1803010a) [ 800.112785] ipw2200 0000:02:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0214000) [ 800.112790] ipw2200 0000:02:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) [ 800.112795] ipw2200 0000:02:04.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900116) [ 800.112812] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x800100, writing 0x5800106) [ 800.112817] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x1, writing 0x44fd) [ 800.112821] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x1, writing 0x4401) [ 800.112826] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x1, writing 0x40fd) [ 800.112831] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x1, writing 0x4001) [ 800.112836] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x53fff000) [ 800.112840] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x50000000) [ 800.112845] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000) [ 800.112850] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000) [ 800.112855] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [ 800.112860] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0215000) [ 800.112865] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800) [ 800.112871] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x4100083, writing 0x4100087) [ 800.112888] yenta_cardbus 0000:02:06.0: O2: res at 0x94/0xD4: ea/00 [ 800.112891] yenta_cardbus 0000:02:06.0: O2: enabling read prefetch/write burst [ 800.113242] yenta_cardbus 0000:02:06.1: restoring config space at offset 0xf (was 0x800100, writing 0x58001ff) [ 800.113247] yenta_cardbus 0000:02:06.1: restoring config space at offset 0xe (was 0x1, writing 0x4cfd) [ 800.113252] yenta_cardbus 0000:02:06.1: restoring config space at offset 0xd (was 0x1, writing 0x4c01) [ 800.113257] yenta_cardbus 0000:02:06.1: restoring config space at offset 0xc (was 0x1, writing 0x48fd) [ 800.113261] yenta_cardbus 0000:02:06.1: restoring config space at offset 0xb (was 0x1, writing 0x4801) [ 800.113266] yenta_cardbus 0000:02:06.1: restoring config space at offset 0xa (was 0x0, writing 0x57fff000) [ 800.113271] yenta_cardbus 0000:02:06.1: restoring config space at offset 0x9 (was 0x0, writing 0x54000000) [ 800.113276] yenta_cardbus 0000:02:06.1: restoring config space at offset 0x8 (was 0x0, writing 0x47fff000) [ 800.113280] yenta_cardbus 0000:02:06.1: restoring config space at offset 0x7 (was 0x0, writing 0x44000000) [ 800.113285] yenta_cardbus 0000:02:06.1: restoring config space at offset 0x6 (was 0x0, writing 0xb00a0702) [ 800.113291] yenta_cardbus 0000:02:06.1: restoring config space at offset 0x4 (was 0x0, writing 0xd0216000) [ 800.113296] yenta_cardbus 0000:02:06.1: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800) [ 800.113301] yenta_cardbus 0000:02:06.1: restoring config space at offset 0x1 (was 0x4100083, writing 0x4100087) [ 800.113680] yenta_cardbus 0000:02:06.3: restoring config space at offset 0xf (was 0x100, writing 0x5800100) [ 800.113685] yenta_cardbus 0000:02:06.3: restoring config space at offset 0xe (was 0x1, writing 0x28fd) [ 800.113690] yenta_cardbus 0000:02:06.3: restoring config space at offset 0xd (was 0x1, writing 0x2801) [ 800.113694] yenta_cardbus 0000:02:06.3: restoring config space at offset 0xc (was 0x1, writing 0x14fd) [ 800.113699] yenta_cardbus 0000:02:06.3: restoring config space at offset 0xb (was 0x1, writing 0x1401) [ 800.113704] yenta_cardbus 0000:02:06.3: restoring config space at offset 0xa (was 0x0, writing 0x5bfff000) [ 800.113709] yenta_cardbus 0000:02:06.3: restoring config space at offset 0x9 (was 0x0, writing 0x58000000) [ 800.113713] yenta_cardbus 0000:02:06.3: restoring config space at offset 0x8 (was 0x0, writing 0x4bfff000) [ 800.113718] yenta_cardbus 0000:02:06.3: restoring config space at offset 0x7 (was 0x0, writing 0x48000000) [ 800.113723] yenta_cardbus 0000:02:06.3: restoring config space at offset 0x6 (was 0x0, writing 0xb00e0b02) [ 800.113729] yenta_cardbus 0000:02:06.3: restoring config space at offset 0x4 (was 0x0, writing 0xd0219000) [ 800.113733] yenta_cardbus 0000:02:06.3: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800) [ 800.113739] yenta_cardbus 0000:02:06.3: restoring config space at offset 0x1 (was 0x4100080, writing 0x4100087) [ 800.114391] PM: early resume of devices complete after 2.317 msecs [ 801.012088] PM: resume of drv:battery dev:PNP0C0A:00 complete after 868.010 msecs [ 801.044203] pm_op(): pci_pm_resume+0x0/0xa0 returns -16 [ 801.044206] PM: Device 0000:00:00.0 failed to resume: error -16 [ 801.044223] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 801.044229] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 801.044246] usb usb2: root hub lost power or was reset [ 801.044262] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 801.044268] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 801.044283] usb usb3: root hub lost power or was reset [ 801.044298] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 801.044303] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 801.044319] usb usb4: root hub lost power or was reset [ 801.044369] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 801.044374] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 801.044385] pci 0000:00:1e.0: setting latency timer to 64 [ 801.044396] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 801.044400] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 801.048120] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 801.048126] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 801.997378] ata2.00: ACPI cmd 03/42:00:00:00:a0:ef (CFA REQUEST EXTENDED ERROR) rejected by device (Stat=0x51 Err=0x04) [ 801.999482] ata2.00: ACPI cmd 00/0c:00:00:00:a0:ef (NOP) rejected by device (Stat=0x51 Err=0x04) [ 802.012295] ata2.00: configured for UDMA/33 [ 802.061549] PM: resume of drv:Intel ICH dev:0000:00:1f.5 complete after 1013.434 msecs [ 802.061559] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 802.061564] [drm] AGP mode requested: 4 [ 802.061567] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 802.061580] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 802.061611] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 802.061851] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 802.161362] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 802.161366] [drm] radeon: cp idle (0x10000C03) [ 802.161407] [drm] radeon: ring at 0x00000000E0000000 [ 802.161431] [drm] ring test succeeded in 1 usecs [ 802.161469] [drm] ib test succeeded in 0 usecs [ 802.236111] PM: resume of drv:radeon dev:0000:01:00.0 complete after 174.553 msecs [ 802.236118] eth1: Coming out of suspend... [ 802.236124] ipw2200 0000:02:04.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 802.236134] ipw2200 0000:02:04.0: firmware: requesting ipw2200-bss.fw [ 802.376023] PM: resume of drv:yenta_cardbus dev:0000:02:06.0 complete after 139.845 msecs [ 802.516027] PM: resume of drv:yenta_cardbus dev:0000:02:06.1 complete after 139.999 msecs [ 802.656029] PM: resume of drv:yenta_cardbus dev:0000:02:06.3 complete after 139.996 msecs [ 802.712041] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0218000-d02187ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 802.713443] parport_pc 00:08: activated [ 802.714389] serial 00:09: activated [ 802.742431] sd 0:0:0:0: [sda] Starting disk [ 802.792754] ata1.00: ACPI cmd 03/45:00:00:00:a0:ef (CFA REQUEST EXTENDED ERROR) rejected by device (Stat=0x51 Err=0x04) [ 802.792944] ata1.00: ACPI cmd 00/0c:00:00:00:a0:ef (NOP) rejected by device (Stat=0x51 Err=0x04) [ 802.808188] ata1.00: configured for UDMA/100 [ 802.812544] PM: resume of devices complete after 2698.123 msecs [ 802.812636] PM: resume devices took 2.700 seconds [ 802.812672] PM: Finishing wakeup. [ 802.812673] Restarting tasks ... done. [ 803.129270] ipw2200: Radio Frequency Kill Switch is On: [ 803.129274] Kill switch must be turned off for wireless networking to work. [ 803.905590] tg3 0000:02:02.0: wake-up capability disabled by ACPI [ 803.905596] tg3 0000:02:02.0: PME# disabled [ 804.207117] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 805.816653] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 805.816663] tg3: eth0: Flow control is on for TX and on for RX. [ 805.817258] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 816.128056] eth0: no IPv6 routers present [ 1030.543288] BUG: unable to handle kernel paging request at f76fb800 [ 1030.547064] IP: [] ext4_iget+0x72/0x740 [ 1030.547064] *pde = 00007067 *pte = 60001400 [ 1030.547064] Oops: 0000 [#1] SMP [ 1030.547064] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0/net/eth1/statistics/collisions [ 1030.547064] Modules linked in: binfmt_misc pcmcia joydev fbcon tileblit font bitblit softcursor vga16fb vgastate snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq radeon snd_timer snd_seq_device ttm ipw2200 drm_kms_helper libipw yenta_socket snd drm i2c_algo_bit rsrc_nonstatic lib80211 pcmcia_core intel_agp soundcore led_class snd_page_alloc shpchp agpgart psmouse serio_raw ppdev parport_pc video output irda crc_ccitt lp parport ohci1394 ieee1394 tg3 [ 1030.547064] [ 1030.547064] Pid: 3334, comm: dpkg Not tainted (2.6.32-22-generic #33-Ubuntu) TravelMate 8000 [ 1030.547064] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [ 1030.547064] EIP is at ext4_iget+0x72/0x740 [ 1030.547064] EAX: f6c86880 EBX: f76fb800 ECX: 00000000 EDX: f6c86880 [ 1030.547064] ESI: ca62e7a8 EDI: 00002e39 EBP: c9529dbc ESP: c9529d64 [ 1030.547064] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1030.547064] Process dpkg (pid: 3334, ti=c9528000 task=e5e3c010 task.ti=c9528000) [ 1030.547064] Stack: [ 1030.547064] c123b040 c9529d70 c058b6ed ca608ec8 c0238805 ce182bb0 ca62e548 c9529d98 [ 1030.547064] <0> c0219bcc 00000001 ce182bb0 c9529da8 c0353189 f69d3800 00000246 f6863c00 [ 1030.547064] <0> f6c86880 00000800 00000001 ce182c38 ca608ec8 00002e39 c9529de4 c0291487 [ 1030.547064] Call Trace: [ 1030.547064] [] ? _spin_lock+0xd/0x10 [ 1030.547064] [] ? inotify_d_instantiate+0x45/0x60 [ 1030.547064] [] ? __d_instantiate+0x9c/0xd0 [ 1030.547064] [] ? copy_to_user+0x39/0x130 [ 1030.547064] [] ? ext4_lookup+0x87/0x100 [ 1030.547064] [] ? _spin_lock+0xd/0x10 [ 1030.547064] [] ? d_alloc+0x13b/0x190 [ 1030.547064] [] ? real_lookup+0xb7/0x110 [ 1030.547064] [] ? do_lookup+0x95/0xc0 [ 1030.547064] [] ? __link_path_walk+0x603/0xca0 [ 1030.547064] [] ? apparmor_file_alloc_security+0x25/0x90 [ 1030.547064] [] ? get_empty_filp+0xcf/0x1c0 [ 1030.547064] [] ? path_walk+0x54/0xc0 [ 1030.547064] [] ? do_path_lookup+0x59/0x90 [ 1030.547064] [] ? do_filp_open+0xad/0x990 [ 1030.547064] [] ? update_curr+0x169/0x2a0 [ 1030.547064] [] ? ioctl_fiemap+0x172/0x1e0 [ 1030.547064] [] ? do_sys_open+0x55/0x160 [ 1030.547064] [] ? fput+0x1d/0x30 [ 1030.547064] [] ? filp_close+0x4c/0x80 [ 1030.547064] [] ? sys_open+0x2e/0x40 [ 1030.547064] [] ? syscall_call+0x7/0xb [ 1030.547064] Code: 5d c3 8d b4 26 00 00 00 00 31 c9 c7 45 e8 00 00 00 00 8d 55 e8 e8 4f fb ff ff 85 c0 0f 88 37 02 00 00 8b 45 e8 8b 58 18 03 5d ec <0f> b7 03 66 89 46 72 0f b7 4b 02 8b 86 a4 00 00 00 89 4e 2c 0f [ 1030.547064] EIP: [] ext4_iget+0x72/0x740 SS:ESP 0068:c9529d64 [ 1030.547064] CR2: 00000000f76fb800 [ 1030.547064] ---[ end trace c265c57a4246f61a ]---