[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] Command line: root=UUID=cc170d8b-7833-4650-b9d0-448cda23dbf9 ro splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ee50000 (usable) [ 0.000000] BIOS-e820: 000000007ee50000 - 000000007eeba000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007eeba000 - 000000007fd63000 (usable) [ 0.000000] BIOS-e820: 000000007fd63000 - 000000007fd6b000 (reserved) [ 0.000000] BIOS-e820: 000000007fd6b000 - 000000007fe0c000 (usable) [ 0.000000] BIOS-e820: 000000007fe0c000 - 000000007fe11000 (reserved) [ 0.000000] BIOS-e820: 000000007fe11000 - 000000007fe92000 (usable) [ 0.000000] BIOS-e820: 000000007fe92000 - 000000007fe93000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fe93000 - 000000007fe95000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fe95000 - 000000007fedd000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fedd000 - 000000007feee000 (usable) [ 0.000000] BIOS-e820: 000000007feee000 - 000000007fef0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007fef4000 (usable) [ 0.000000] BIOS-e820: 000000007fef4000 - 000000007feff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007feff000 - 000000007ff00000 (usable) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 519760) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 519866, 523619) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 523627, 523788) 3 entries of 3200 used [ 0.000000] Entering add_active_range(0, 523793, 523922) 4 entries of 3200 used [ 0.000000] Entering add_active_range(0, 523997, 524014) 5 entries of 3200 used [ 0.000000] Entering add_active_range(0, 524019, 524020) 6 entries of 3200 used [ 0.000000] Entering add_active_range(0, 524031, 524032) 7 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FE020 checksum 0 [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) [ 0.000000] ACPI: RSDT 7FEFD038, 0050 (r1 INTEL D975XBX2 AFD 1000013) [ 0.000000] ACPI: FACP 7FEFC000, 0074 (r1 INTEL D975XBX2 AFD MSFT 1000013) [ 0.000000] ACPI: DSDT 7FEF8000, 3F11 (r1 INTEL D975XBX2 AFD MSFT 1000013) [ 0.000000] ACPI: FACS 7FE95000, 0040 [ 0.000000] ACPI: APIC 7FEF7000, 0078 (r1 INTEL D975XBX2 AFD MSFT 1000013) [ 0.000000] ACPI: WDDT 7FEF6000, 0040 (r1 INTEL D975XBX2 AFD MSFT 1000013) [ 0.000000] ACPI: MCFG 7FEF5000, 003C (r1 INTEL D975XBX2 AFD MSFT 1000013) [ 0.000000] ACPI: ASF! 7FEF4000, 00A6 (r32 INTEL D975XBX2 AFD MSFT 1000013) [ 0.000000] ACPI: SSDT 7FEF2000, 01BC (r1 INTEL CpuPm AFD MSFT 1000013) [ 0.000000] ACPI: SSDT 7FEF1000, 0175 (r1 INTEL Cpu0Ist AFD MSFT 1000013) [ 0.000000] ACPI: SSDT 7FEF0000, 0175 (r1 INTEL Cpu1Ist AFD MSFT 1000013) [ 0.000000] ACPI: SSDT 7FE94000, 0175 (r1 INTEL Cpu2Ist AFD MSFT 1000013) [ 0.000000] ACPI: SSDT 7FE93000, 0175 (r1 INTEL Cpu3Ist AFD MSFT 1000013) [ 0.000000] ACPI: TCPA 7FE92000, 09E4 (r1 INTEL TIANO 2 MSFT 1000013) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ff00000 [ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 519760) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 519866, 523619) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 523627, 523788) 3 entries of 3200 used [ 0.000000] Entering add_active_range(0, 523793, 523922) 4 entries of 3200 used [ 0.000000] Entering add_active_range(0, 523997, 524014) 5 entries of 3200 used [ 0.000000] Entering add_active_range(0, 524019, 524020) 6 entries of 3200 used [ 0.000000] Entering add_active_range(0, 524031, 524032) 7 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0 -> 143 [ 0.000000] 0: 256 -> 519760 [ 0.000000] 0: 519866 -> 523619 [ 0.000000] 0: 523627 -> 523788 [ 0.000000] 0: 523793 -> 523922 [ 0.000000] 0: 523997 -> 524014 [ 0.000000] 0: 524019 -> 524020 [ 0.000000] 0: 524031 -> 524032 [ 0.000000] On node 0 totalpages: 523709 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1211 pages reserved [ 0.000000] DMA zone: 2716 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512618 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000008f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 000000007ee50000 - 000000007eeba000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fd63000 - 000000007fd6b000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fe0c000 - 000000007fe11000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fe92000 - 000000007fe93000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fe93000 - 000000007fe95000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fe95000 - 000000007fedd000 [ 0.000000] swsusp: Registered nosave memory region: 000000007feee000 - 000000007fef0000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fef0000 - 000000007fef3000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fef4000 - 000000007feff000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ff00000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515334 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=cc170d8b-7833-4650-b9d0-448cda23dbf9 ro splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 137.296250] time.c: Detected 2666.361 MHz processor. [ 137.296952] Console: colour VGA+ 80x25 [ 137.296956] console [tty0] enabled [ 137.299831] Checking aperture... [ 137.299866] Calgary: detecting Calgary via BIOS EBDA area [ 137.299870] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 137.321315] Memory: 2053592k/2096128k available (2466k kernel code, 41244k reserved, 1309k data, 316k init) [ 137.321384] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 137.398235] Calibrating delay using timer specific routine.. 5336.64 BogoMIPS (lpj=10673293) [ 137.398321] Security Framework initialized [ 137.398356] SELinux: Disabled at boot. [ 137.398394] AppArmor: AppArmor initialized [ 137.398425] Failure registering capabilities with primary security module. [ 137.398607] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 137.399814] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 137.400505] Mount-cache hash table entries: 256 [ 137.400655] CPU: L1 I cache: 32K, L1 D cache: 32K [ 137.400710] CPU: L2 cache: 4096K [ 137.400740] CPU 0/0 -> Node 0 [ 137.400768] using mwait in idle threads. [ 137.400797] CPU: Physical Processor ID: 0 [ 137.400826] CPU: Processor Core ID: 0 [ 137.400859] CPU0: Thermal monitoring enabled (TM2) [ 137.400899] SMP alternatives: switching to UP code [ 137.401543] Early unpacking initramfs... done [ 137.657582] ACPI: Core revision 20070126 [ 137.657639] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 137.700257] Using local APIC timer interrupts. [ 137.737788] APIC timer calibration result 20830933 [ 137.737789] Detected 20.830 MHz APIC timer. [ 137.737878] SMP alternatives: switching to SMP code [ 137.738425] Booting processor 1/2 APIC 0x1 [ 137.748822] Initializing CPU#1 [ 137.825815] Calibrating delay using timer specific routine.. 5332.71 BogoMIPS (lpj=10665437) [ 137.825820] CPU: L1 I cache: 32K, L1 D cache: 32K [ 137.825821] CPU: L2 cache: 4096K [ 137.825823] CPU 1/1 -> Node 0 [ 137.825824] CPU: Physical Processor ID: 0 [ 137.825825] CPU: Processor Core ID: 1 [ 137.825829] CPU1: Thermal monitoring enabled (TM2) [ 137.826217] Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b [ 137.826251] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 137.846579] Brought up 2 CPUs [ 137.846667] CPU0 attaching sched-domain: [ 137.846669] domain 0: span 03 [ 137.846670] groups: 01 02 [ 137.846672] domain 1: span 03 [ 137.846673] groups: 03 [ 137.846675] CPU1 attaching sched-domain: [ 137.846675] domain 0: span 03 [ 137.846677] groups: 02 01 [ 137.846678] domain 1: span 03 [ 137.846679] groups: 03 [ 137.846847] net_namespace: 120 bytes [ 137.847146] Time: 22:28:01 Date: 05/09/08 [ 137.847193] NET: Registered protocol family 16 [ 137.847347] ACPI: bus type pci registered [ 137.847428] PCI: Using configuration type 1 [ 137.848357] ACPI: EC: Look up EC in DSDT [ 137.849551] ACPI: Interpreter enabled [ 137.849582] ACPI: (supports S0 S1 S3 S4 S5) [ 137.849735] ACPI: Using IOAPIC for interrupt routing [ 137.852233] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 137.853324] Force enabled HPET at base address 0xfed00000 [ 137.853951] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 137.853986] PCI quirk: region 0500-053f claimed by ICH6 GPIO [ 137.855012] PCI: Transparent bridge - 0000:00:1e.0 [ 137.855069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 137.855319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 137.855438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 137.855511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 137.855583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 137.857891] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 137.858216] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) [ 137.858535] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) [ 137.858854] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 137.859173] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 137.859543] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 137.859912] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) [ 137.860231] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) [ 137.860602] Linux Plug and Play Support v0.97 (c) Adam Belay [ 137.860652] pnp: PnP ACPI init [ 137.860685] ACPI: bus type pnp registered [ 137.862532] pnp: PnP ACPI: found 14 devices [ 137.862562] ACPI: ACPI bus type pnp unregistered [ 137.862745] PCI: Using ACPI for IRQ routing [ 137.862775] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 137.873890] NET: Registered protocol family 8 [ 137.873922] NET: Registered protocol family 20 [ 137.874427] PCI-GART: No AMD northbridge found. [ 137.874540] hpet clockevent registered [ 137.874542] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 137.874665] hpet0: 3 64-bit timers, 14318180 Hz [ 137.875722] AppArmor: AppArmor Filesystem Enabled [ 137.877866] Time: tsc clocksource has been installed. [ 137.885937] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved [ 137.885971] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 137.886004] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 137.886037] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 137.886070] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 137.886103] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 137.886141] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 137.886172] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved [ 137.886203] system 00:01: iomem range 0xc0000-0xdffff has been reserved [ 137.886234] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 137.886267] system 00:06: ioport range 0x500-0x53f has been reserved [ 137.886298] system 00:06: ioport range 0x400-0x47f has been reserved [ 137.886328] system 00:06: ioport range 0x680-0x6ff has been reserved [ 137.886361] system 00:07: iomem range 0xfed40000-0xfed44fff has been reserved [ 137.886647] PCI: Bridge: 0000:00:01.0 [ 137.886677] IO window: 3000-3fff [ 137.886707] MEM window: 90500000-905fffff [ 137.886737] PREFETCH window: 80000000-8fffffff [ 137.886768] PCI: Bridge: 0000:00:03.0 [ 137.886797] IO window: disabled. [ 137.886827] MEM window: 90000000-901fffff [ 137.886857] PREFETCH window: 90700000-907fffff [ 137.886887] PCI: Bridge: 0000:00:1c.0 [ 137.886916] IO window: disabled. [ 137.886947] MEM window: disabled. [ 137.886977] PREFETCH window: disabled. [ 137.887008] PCI: Bridge: 0000:00:1c.4 [ 137.887037] IO window: 2000-2fff [ 137.887069] MEM window: 90400000-904fffff [ 137.887099] PREFETCH window: 90800000-908fffff [ 137.887131] PCI: Bridge: 0000:00:1c.5 [ 137.887160] IO window: 1000-1fff [ 137.887192] MEM window: 90300000-903fffff [ 137.887222] PREFETCH window: disabled. [ 137.887253] PCI: Bridge: 0000:00:1e.0 [ 137.887282] IO window: disabled. [ 137.887313] MEM window: 90200000-902fffff [ 137.887343] PREFETCH window: disabled. [ 137.887381] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 137.887440] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 137.887445] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 137.887505] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 137.887518] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 137.887577] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 137.887589] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 [ 137.887648] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 137.887660] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 [ 137.887720] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 137.887727] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 137.887733] NET: Registered protocol family 2 [ 137.922165] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 137.922659] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 137.924128] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 137.924753] TCP: Hash tables configured (established 262144 bind 65536) [ 137.924784] TCP reno registered [ 137.934292] checking if image is initramfs... it is [ 138.374840] Switched to high resolution mode on CPU 1 [ 138.378077] Switched to high resolution mode on CPU 0 [ 138.440399] Freeing initrd memory: 7485k freed [ 138.443423] audit: initializing netlink socket (disabled) [ 138.443475] audit(1210372081.100:1): initialized [ 138.444890] VFS: Disk quotas dquot_6.5.1 [ 138.444963] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 138.445077] io scheduler noop registered [ 138.445106] io scheduler anticipatory registered [ 138.445136] io scheduler deadline registered [ 138.445236] io scheduler cfq registered (default) [ 138.447149] Boot video device is 0000:01:00.0 [ 138.447272] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 138.447293] assign_interrupt_mode Found MSI capability [ 138.447342] Allocate Port Service[0000:00:01.0:pcie00] [ 138.447391] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 138.447411] assign_interrupt_mode Found MSI capability [ 138.447456] Allocate Port Service[0000:00:03.0:pcie00] [ 138.447500] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 138.447529] assign_interrupt_mode Found MSI capability [ 138.447582] Allocate Port Service[0000:00:1c.0:pcie00] [ 138.447600] Allocate Port Service[0000:00:1c.0:pcie02] [ 138.447656] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 138.447685] assign_interrupt_mode Found MSI capability [ 138.447738] Allocate Port Service[0000:00:1c.4:pcie00] [ 138.447757] Allocate Port Service[0000:00:1c.4:pcie02] [ 138.447812] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 138.447841] assign_interrupt_mode Found MSI capability [ 138.447893] Allocate Port Service[0000:00:1c.5:pcie00] [ 138.447912] Allocate Port Service[0000:00:1c.5:pcie02] [ 138.463138] Real Time Clock Driver v1.12ac [ 138.463235] Linux agpgart interface v0.102 [ 138.463265] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 138.463399] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 138.463833] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 138.463961] ACPI: PCI Interrupt 0000:05:00.3[C] -> GSI 19 (level, low) -> IRQ 19 [ 138.464164] 0000:05:00.3: ttyS1 at I/O 0x1020 (irq = 19) is a 16550A [ 138.464600] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 138.464676] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 138.464773] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 138.467641] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 138.467673] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 138.481844] mice: PS/2 mouse device common for all mice [ 138.481904] cpuidle: using governor ladder [ 138.481936] cpuidle: using governor menu [ 138.482074] NET: Registered protocol family 1 [ 138.482142] registered taskstats version 1 [ 138.482262] Magic number: 8:928:501 [ 138.482353] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 138.482388] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 138.482418] EDD information not available. [ 138.482451] Freeing unused kernel memory: 316k freed [ 138.511773] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 139.608027] fuse init (API version 7.9) [ 139.619344] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 139.619353] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 139.826748] SCSI subsystem initialized [ 139.827638] Adaptec aacraid driver 1.1-5[2449]-ms [ 139.827674] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 139.827679] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 139.834734] usbcore: registered new interface driver usbfs [ 139.834749] usbcore: registered new interface driver hub [ 139.835180] usbcore: registered new device driver usb [ 139.837440] USB Universal Host Controller Interface driver v3.0 [ 139.837660] libata version 3.00 loaded. [ 139.839590] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 139.839592] Copyright (c) 1999-2006 Intel Corporation. [ 139.927766] Floppy drive(s): fd0 is 1.44M [ 139.945074] FDC 0 is a post-1991 82077 [ 140.090147] AAC0: kernel 5.2-0[15738] Mar 28 2008 [ 140.090151] AAC0: monitor 5.2-0[15738] [ 140.090152] AAC0: bios 5.2-0[15738] [ 140.090154] AAC0: serial 0245ED [ 140.090155] AAC0: Non-DASD support enabled. [ 140.090156] AAC0: 64bit support enabled. [ 140.090157] AAC0: 64 Bit DAC enabled [ 140.097258] scsi0 : aacraid [ 140.097344] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 140.097354] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 140.097357] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 140.097582] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 140.097607] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 [ 140.097703] usb usb1: configuration #1 chosen from 1 choice [ 140.097719] hub 1-0:1.0: USB hub found [ 140.097724] hub 1-0:1.0: 2 ports detected [ 140.097979] scsi 0:0:0:0: Direct-Access Adaptec r0vol0 V1.0 PQ: 0 ANSI: 2 [ 140.098089] scsi 0:0:1:0: Direct-Access Adaptec r0vol1 V1.0 PQ: 0 ANSI: 2 [ 140.098335] scsi 0:0:2:0: Direct-Access Adaptec r0vol2 V1.0 PQ: 0 ANSI: 2 [ 140.098406] scsi 0:0:3:0: Direct-Access Adaptec r10vol0 V1.0 PQ: 0 ANSI: 2 [ 140.098471] scsi 0:0:4:0: Direct-Access Adaptec r10vol1 V1.0 PQ: 0 ANSI: 2 [ 140.105190] scsi 0:1:0:0: Direct-Access WDC WD10EACS-00Z 1B01 PQ: 0 ANSI: 5 [ 140.105962] scsi 0:1:1:0: Direct-Access WDC WD10EACS-00Z 1B01 PQ: 0 ANSI: 5 [ 140.106735] scsi 0:1:2:0: Direct-Access WDC WD10EACS-00Z 1B01 PQ: 0 ANSI: 5 [ 140.107509] scsi 0:1:3:0: Direct-Access WDC WD10EACS-00Z 1B01 PQ: 0 ANSI: 5 [ 140.193306] Driver 'sd' needs updating - please use bus_type methods [ 140.193571] sd 0:0:0:0: [sda] 209694720 512-byte hardware sectors (107364 MB) [ 140.193582] sd 0:0:0:0: [sda] Write Protect is off [ 140.193583] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00 [ 140.193598] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.193638] sd 0:0:0:0: [sda] 209694720 512-byte hardware sectors (107364 MB) [ 140.193646] sd 0:0:0:0: [sda] Write Protect is off [ 140.193648] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00 [ 140.193662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.193665] sda: sda1 sda2 < sda5 > [ 140.199540] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 140.199610] sd 0:0:1:0: [sdb] 104837120 512-byte hardware sectors (53677 MB) [ 140.199623] sd 0:0:1:0: [sdb] Write Protect is off [ 140.199625] sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00 [ 140.199644] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.199688] sd 0:0:1:0: [sdb] 104837120 512-byte hardware sectors (53677 MB) [ 140.199697] sd 0:0:1:0: [sdb] Write Protect is off [ 140.199698] sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00 [ 140.199712] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.199714] sdb: sdb1 sdb2 <<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 140.202116] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 140.202119] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 140.202138] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 140.202163] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 [ 140.202244] usb usb2: configuration #1 chosen from 1 choice [ 140.202258] hub 2-0:1.0: USB hub found [ 140.202262] hub 2-0:1.0: 2 ports detected [ 140.206269] sdb5 > [ 140.206328] sd 0:0:1:0: [sdb] Attached SCSI removable disk [ 140.206372] sd 0:0:2:0: [sdc] 104837120 512-byte hardware sectors (53677 MB) [ 140.206384] sd 0:0:2:0: [sdc] Write Protect is off [ 140.206386] sd 0:0:2:0: [sdc] Mode Sense: 06 00 10 00 [ 140.206405] sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.206448] sd 0:0:2:0: [sdc] 104837120 512-byte hardware sectors (53677 MB) [ 140.206459] sd 0:0:2:0: [sdc] Write Protect is off [ 140.206461] sd 0:0:2:0: [sdc] Mode Sense: 06 00 10 00 [ 140.206480] sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.206482] sdc: sdc1 [ 140.206709] sd 0:0:2:0: [sdc] Attached SCSI removable disk [ 140.206739] sd 0:0:3:0: [sdd] 1847590912 512-byte hardware sectors (945967 MB) [ 140.206747] sd 0:0:3:0: [sdd] Write Protect is off [ 140.206749] sd 0:0:3:0: [sdd] Mode Sense: 06 00 10 00 [ 140.206763] sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.206794] sd 0:0:3:0: [sdd] 1847590912 512-byte hardware sectors (945967 MB) [ 140.206802] sd 0:0:3:0: [sdd] Write Protect is off [ 140.206803] sd 0:0:3:0: [sdd] Mode Sense: 06 00 10 00 [ 140.206818] sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.206820] sdd: sdd1 [ 140.207129] sd 0:0:3:0: [sdd] Attached SCSI removable disk [ 140.207160] sd 0:0:4:0: [sde] 1847586816 512-byte hardware sectors (945964 MB) [ 140.207168] sd 0:0:4:0: [sde] Write Protect is off [ 140.207169] sd 0:0:4:0: [sde] Mode Sense: 06 00 10 00 [ 140.207184] sd 0:0:4:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.207215] sd 0:0:4:0: [sde] 1847586816 512-byte hardware sectors (945964 MB) [ 140.207223] sd 0:0:4:0: [sde] Write Protect is off [ 140.207225] sd 0:0:4:0: [sde] Mode Sense: 06 00 10 00 [ 140.207239] sd 0:0:4:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.207241] sde: sde1 [ 140.207662] sd 0:0:4:0: [sde] Attached SCSI removable disk [ 140.214987] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 140.215001] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 140.215013] sd 0:0:2:0: Attached scsi generic sg2 type 0 [ 140.215025] sd 0:0:3:0: Attached scsi generic sg3 type 0 [ 140.215037] sd 0:0:4:0: Attached scsi generic sg4 type 0 [ 140.215048] scsi 0:1:0:0: Attached scsi generic sg5 type 0 [ 140.215058] scsi 0:1:1:0: Attached scsi generic sg6 type 0 [ 140.215069] scsi 0:1:2:0: Attached scsi generic sg7 type 0 [ 140.215080] scsi 0:1:3:0: Attached scsi generic sg8 type 0 [ 140.306058] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 140.306071] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 140.306074] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 140.306093] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 140.306117] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 140.306205] usb usb3: configuration #1 chosen from 1 choice [ 140.306219] hub 3-0:1.0: USB hub found [ 140.306222] hub 3-0:1.0: 2 ports detected [ 140.410043] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 140.410054] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 140.410057] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 140.410077] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 140.410098] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 [ 140.410188] usb usb4: configuration #1 chosen from 1 choice [ 140.410202] hub 4-0:1.0: USB hub found [ 140.410205] hub 4-0:1.0: 2 ports detected [ 140.518072] ahci 0000:00:1f.2: version 3.0 [ 140.518093] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 140.552537] Attempting manual resume [ 140.552540] swsusp: Resume From Partition 8:5 [ 140.552541] PM: Checking swsusp image. [ 140.552622] PM: Resume from disk failed. [ 140.561036] kjournald starting. Commit interval 5 seconds [ 140.561042] EXT3-fs: mounted filesystem with ordered data mode. [ 141.521521] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 141.521525] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part [ 141.521529] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 141.521690] scsi1 : ahci [ 141.521741] scsi2 : ahci [ 141.521771] scsi3 : ahci [ 141.521799] scsi4 : ahci [ 141.521863] ata1: SATA max UDMA/133 abar m1024@0x90604000 port 0x90604100 irq 506 [ 141.521866] ata2: SATA max UDMA/133 abar m1024@0x90604000 port 0x90604180 irq 506 [ 141.521868] ata3: SATA max UDMA/133 abar m1024@0x90604000 port 0x90604200 irq 506 [ 141.521870] ata4: SATA max UDMA/133 abar m1024@0x90604000 port 0x90604280 irq 506 [ 141.833234] ata1: SATA link down (SStatus 0 SControl 300) [ 142.145646] ata2: SATA link down (SStatus 0 SControl 300) [ 142.457115] ata3: SATA link down (SStatus 0 SControl 300) [ 142.769549] ata4: SATA link down (SStatus 0 SControl 300) [ 142.769595] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 142.770398] ahci 0000:04:00.0: controller can't do NCQ, turning off CAP_NCQ [ 142.770402] ahci 0000:04:00.0: MV_AHCI HACK: port_map 0 -> 0 [ 142.770404] ahci 0000:04:00.0: nr_ports (5) and implemented port map (0xf) don't match, using nr_ports [ 142.770405] ahci 0000:04:00.0: forcing PORTS_IMPL to 0x1f [ 143.773207] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 5 ports 3 Gbps 0x1f impl SATA mode [ 143.773210] ahci 0000:04:00.0: flags: 64bit stag pmp slum part [ 143.773215] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 143.773413] scsi5 : ahci [ 143.773461] scsi6 : ahci [ 143.773492] scsi7 : ahci [ 143.773522] scsi8 : ahci [ 143.773554] scsi9 : ahci [ 143.773573] ata5: SATA max UDMA/133 abar m1024@0x90400000 port 0x90400100 irq 16 [ 143.773576] ata6: SATA max UDMA/133 abar m1024@0x90400000 port 0x90400180 irq 16 [ 143.773578] ata7: SATA max UDMA/133 abar m1024@0x90400000 port 0x90400200 irq 16 [ 143.773581] ata8: SATA max UDMA/133 abar m1024@0x90400000 port 0x90400280 irq 16 [ 143.773583] ata9: SATA max UDMA/133 abar m1024@0x90400000 port 0x90400300 irq 16 [ 144.093354] ata5: SATA link down (SStatus 0 SControl 300) [ 144.413279] ata6: SATA link down (SStatus 0 SControl 300) [ 144.737233] ata7: SATA link down (SStatus 0 SControl 300) [ 144.871914] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 144.966894] EDAC MC: Ver: 2.1.0 Apr 10 2008 [ 145.009296] input: Power Button (FF) as /devices/virtual/input/input2 [ 145.032887] ACPI: Power Button (FF) [PWRF] [ 145.032935] input: Sleep Button (CM) as /devices/virtual/input/input3 [ 145.057316] ata8: SATA link down (SStatus 0 SControl 300) [ 145.064647] ACPI: Sleep Button (CM) [SLPB] [ 145.377094] ata9: SATA link down (SStatus 0 SControl 0) [ 145.377198] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 145.377211] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 145.441581] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:b3:27:cf [ 145.453143] intel_rng: Firmware space is locked read-only. If you can't or [ 145.453144] intel_rng: don't want to disable this in firmware setup, and if [ 145.453145] intel_rng: you are certain that your system has a functional [ 145.453146] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 145.505648] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 145.505699] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 145.506350] EDAC i82975x: ECC disabled on both channels. [ 145.507053] ACPI: PCI Interrupt 0000:06:04.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 18 (level, low) -> IRQ 18 [ 145.507059] GSI 23 (level, low) -> IRQ 23 [ 145.507680] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 145.507685] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 145.507727] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 145.511620] ehci_hcd 0000:00:1d.7: debug port 1 [ 145.511624] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 145.511629] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90604400 [ 145.557520] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[90204000-902047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 145.561772] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 145.561851] usb usb5: configuration #1 chosen from 1 choice [ 145.561867] hub 5-0:1.0: USB hub found [ 145.561872] hub 5-0:1.0: 8 ports detected [ 145.621110] iTCO_vendor_support: vendor-support=0 [ 145.622526] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 145.622577] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 145.622600] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 145.626817] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 145.665134] ata_piix 0000:00:1f.1: version 2.12 [ 145.665152] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 145.665179] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 145.675867] scsi10 : ata_piix [ 145.676372] scsi11 : ata_piix [ 145.676663] ata10: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 [ 145.676665] ata11: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 [ 145.872852] logips2pp: Detected unknown logitech mouse model 11 [ 145.996783] ata10.00: ATAPI: TSSTcorp CDDVDW SH-S202G, SB00, max UDMA/66 [ 145.996793] ata10.00: limited to UDMA/33 due to 40-wire cable [ 146.168892] ata10.00: configured for UDMA/33 [ 146.168946] ata11: port disabled. ignoring. [ 146.169587] scsi 10:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202G SB00 PQ: 0 ANSI: 5 [ 146.169641] scsi 10:0:0:0: Attached scsi generic sg9 type 5 [ 146.173412] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 146.174088] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 146.380607] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input5 [ 146.428501] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 146.429161] PCI: Setting latency timer of device 0000:01:00.1 to 64 [ 146.523719] ipmi message handler version 39.1 [ 146.523848] parport_pc 00:09: reported by Plug and Play ACPI [ 146.523914] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 146.526453] IPMI System Interface driver. [ 146.526497] ACPI: PCI Interrupt 0000:05:00.4[D] -> GSI 16 (level, low) -> IRQ 16 [ 146.526500] ipmi_si: Trying PCI-specified kcs state machine at mem address 0x903a0000, slave address 0x0, irq 16 [ 146.844919] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001ec6198] [ 146.944260] Driver 'sr' needs updating - please use bus_type methods [ 146.950179] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 146.950183] Uniform CD-ROM driver Revision: 3.20 [ 146.950219] sr 10:0:0:0: Attached scsi CD-ROM sr0 [ 147.129484] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 147.129488] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO [ 147.188161] NET: Registered protocol family 10 [ 147.188316] lo: Disabled Privacy Extensions [ 157.526516] eth0: no IPv6 routers present [ 306.609460] ipmi_si: There appears to be no BMC at this location [ 306.621466] ACPI: PCI interrupt for device 0000:05:00.4 disabled [ 306.666079] ipmi_si: Unable to find any System Interface(s) [ 307.560673] lp0: using parport0 (interrupt-driven). [ 308.047263] Adding 4297348k swap on /dev/sda5. Priority:-1 extents:1 across:4297348k [ 308.712289] EXT3 FS on sda1, internal journal [ 309.742539] ip_tables: (C) 2000-2006 Netfilter Core Team [ 311.123788] No dock devices found. [ 312.671066] ppdev: user-space parallel port driver [ 312.790318] audit(1210372256.307:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5806 profile="/usr/sbin/cupsd" namespace="default" [ 312.927048] RPC: Registered udp transport module. [ 312.927051] RPC: Registered tcp transport module. [ 312.949310] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 313.058238] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 313.070857] NFSD: starting 90-second grace period [ 313.663107] Bluetooth: Core ver 2.11 [ 313.663511] NET: Registered protocol family 31 [ 313.663513] Bluetooth: HCI device and connection manager initialized [ 313.663516] Bluetooth: HCI socket layer initialized [ 313.671750] Bluetooth: L2CAP ver 2.9 [ 313.671754] Bluetooth: L2CAP socket layer initialized [ 313.705939] Bluetooth: RFCOMM socket layer initialized [ 313.705949] Bluetooth: RFCOMM TTY layer initialized [ 313.705951] Bluetooth: RFCOMM ver 1.8 [ 349.281326] gnome-keyring-d[6258]: segfault at 24 rip 42c63c rsp 7fff810c1880 error 6 [ 350.051680] gnome-keyring-d[6384]: segfault at 24 rip 42c63c rsp 40b489a0 error 6