Fabián Rodríguez wrote: > sorry for being a bit fats on this one. > > Before I mark as duplicate, could you provide the output of: > > lspci 00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2) 00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2) 00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1) 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) 00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2) 00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2) 00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2) 00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2) 00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 02:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 02:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) 02:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 02:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) > dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf50000 (usable) [ 0.000000] BIOS-e820: 000000007bf50000 - 000000007bf65000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bf65000 - 000000007bf66000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bf66000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 1087MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f8220 [ 0.000000] Entering add_active_range(0, 0, 507728) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 507728 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 507728 [ 0.000000] On node 0 totalpages: 507728 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2174 pages used for memmap [ 0.000000] HighMem zone: 276178 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F8250 checksum 0 [ 0.000000] ACPI: RSDP 000F8250, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7BF5C0FB, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 7BF649BA, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 7BF5C167, 87DF (r1 NVIDIA MCP67 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 7BF65FC0, 0040 [ 0.000000] ACPI: TCPA 7BF64AAE, 0032 (r1 Phoeni x 6040000 TL 0) [ 0.000000] ACPI: SRAT 7BF64AE0, 00A0 (r1 AMD HAMMER 6040000 AMD 1) [ 0.000000] ACPI: SSDT 7BF64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG 7BF64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 7BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC 7BF64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503762 [ 0.000000] Kernel command line: root=UUID=6c1d1f33-b7c8-4c7c-9170-ad39bf061cef ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2000.181 MHz processor. [ 34.126049] spurious 8259A interrupt: IRQ7. [ 34.129337] Console: colour VGA+ 80x25 [ 34.129339] console [tty0] enabled [ 34.129603] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 34.129946] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 34.208769] Memory: 2001480k/2030912k available (2177k kernel code, 28188k reserved, 1006k data, 368k init, 1113408k highmem) [ 34.208776] virtual kernel memory layout: [ 34.208777] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 34.208778] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 34.208779] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 34.208780] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 34.208782] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 34.208783] .data : 0xc0320434 - 0xc041bdc4 (1006 kB) [ 34.208784] .text : 0xc0100000 - 0xc0320434 (2177 kB) [ 34.208787] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 34.208818] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 34.208950] hpet clockevent registered [ 34.288805] Calibrating delay using timer specific routine.. 4004.47 BogoMIPS (lpj=8008942) [ 34.288824] Security Framework initialized [ 34.288828] SELinux: Disabled at boot. [ 34.288840] AppArmor: AppArmor initialized [ 34.288844] Failure registering capabilities with primary security module. [ 34.288851] Mount-cache hash table entries: 512 [ 34.288946] Initializing cgroup subsys ns [ 34.288950] Initializing cgroup subsys cpuacct [ 34.288958] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 34.288965] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 34.288968] CPU: L2 Cache: 512K (64 bytes/line) [ 34.288970] CPU 0(2) -> Core 0 [ 34.288972] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 34.288981] Compat vDSO mapped to ffffe000. [ 34.288989] Checking 'hlt' instruction... OK. [ 34.305019] SMP alternatives: switching to UP code [ 34.306076] Early unpacking initramfs... done [ 34.609671] ACPI: Core revision 20070126 [ 34.609738] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 35.018299] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 35.018314] SMP alternatives: switching to SMP code [ 35.018705] Booting processor 1/1 eip 3000 [ 35.027817] Initializing CPU#1 [ 35.106390] Calibrating delay using timer specific routine.. 4000.55 BogoMIPS (lpj=8001109) [ 35.106396] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 35.106403] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 35.106404] CPU: L2 Cache: 512K (64 bytes/line) [ 35.106407] CPU 1(2) -> Core 1 [ 35.106408] AMD C1E detected late. Force timer broadcast. [ 35.106410] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 35.107489] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 35.107505] Total of 2 processors activated (8005.02 BogoMIPS). [ 35.107742] ENABLING IO-APIC IRQs [ 35.107972] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 35.147730] Brought up 2 CPUs [ 35.147774] CPU0 attaching sched-domain: [ 35.147776] domain 0: span 03 [ 35.147778] groups: 01 02 [ 35.147781] CPU1 attaching sched-domain: [ 35.147782] domain 0: span 03 [ 35.147784] groups: 02 01 [ 35.147960] net_namespace: 64 bytes [ 35.147967] Booting paravirtualized kernel on bare hardware [ 35.148397] Time: 22:40:30 Date: 07/02/08 [ 35.148419] NET: Registered protocol family 16 [ 35.148584] EISA bus registered [ 35.148587] ACPI: bus type pci registered [ 35.169549] PCI: PCI BIOS revision 3.00 entry at 0xfddad, last bus=5 [ 35.169551] PCI: Using configuration type 1 [ 35.169558] Setting up standard PCI resources [ 35.171178] ACPI: EC: Look up EC in DSDT [ 35.172825] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 35.173366] ACPI: Interpreter enabled [ 35.173368] ACPI: (supports S0 S3 S4 S5) [ 35.173379] ACPI: Using IOAPIC for interrupt routing [ 35.172983] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 35.180240] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 35.180243] ACPI: EC: driver started in interrupt mode [ 35.180296] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 35.181171] PCI: Transparent bridge - 0000:00:08.0 [ 35.181348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 35.181429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 35.181448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 35.181476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 35.211417] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 35.211612] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 35.211798] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 35.211983] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 35.212169] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 35.212355] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 35.212540] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 35.212726] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 35.212911] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 35.213096] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 35.213281] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 35.213467] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 35.213652] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 35.213838] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 35.214024] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 35.214209] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 35.214394] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 35.214580] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 35.214766] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 35.214893] Linux Plug and Play Support v0.97 (c) Adam Belay [ 35.214919] pnp: PnP ACPI init [ 35.214928] ACPI: bus type pnp registered [ 35.216961] pnp: PnP ACPI: found 12 devices [ 35.216964] ACPI: ACPI bus type pnp unregistered [ 35.216967] PnPBIOS: Disabled by ACPI PNP [ 35.217183] PCI: Using ACPI for IRQ routing [ 35.217186] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 35.246578] NET: Registered protocol family 8 [ 35.246580] NET: Registered protocol family 20 [ 35.246611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 35.246616] hpet0: 3 32-bit timers, 25000000 Hz [ 35.247652] AppArmor: AppArmor Filesystem Enabled [ 35.251449] Time: hpet clocksource has been installed. [ 35.251452] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 35.251455] Could not switch to high resolution mode on CPU 0 [ 35.254560] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 35.254563] Could not switch to high resolution mode on CPU 1 [ 35.262579] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 35.262584] system 00:03: ioport range 0x1000-0x107f has been reserved [ 35.262587] system 00:03: ioport range 0x1080-0x10ff has been reserved [ 35.262590] system 00:03: ioport range 0x1400-0x147f has been reserved [ 35.262592] system 00:03: ioport range 0x1480-0x14ff has been reserved [ 35.262595] system 00:03: ioport range 0x1800-0x187f has been reserved [ 35.262597] system 00:03: ioport range 0x1880-0x18ff has been reserved [ 35.262602] system 00:04: ioport range 0x360-0x361 has been reserved [ 35.262604] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 35.262612] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 35.262615] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 35.262618] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 35.262620] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 35.262623] system 00:0b: iomem range 0x0-0x0 could not be reserved [ 35.262626] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 35.292962] PCI: Bridge: 0000:00:08.0 [ 35.292964] IO window: disabled. [ 35.292967] MEM window: f6100000-f61fffff [ 35.292970] PREFETCH window: disabled. [ 35.292972] PCI: Bridge: 0000:00:0c.0 [ 35.292974] IO window: 4000-4fff [ 35.292977] MEM window: f2000000-f3ffffff [ 35.292979] PREFETCH window: f0000000-f1ffffff [ 35.292981] PCI: Bridge: 0000:00:0d.0 [ 35.292983] IO window: disabled. [ 35.292985] MEM window: f6000000-f60fffff [ 35.292987] PREFETCH window: disabled. [ 35.292997] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 35.293005] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 35.293012] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 35.293021] NET: Registered protocol family 2 [ 35.330479] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 35.330716] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 35.331355] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 35.331680] TCP: Hash tables configured (established 131072 bind 65536) [ 35.331683] TCP reno registered [ 35.346517] checking if image is initramfs... it is [ 35.934050] Freeing initrd memory: 7317k freed [ 35.934141] Simple Boot Flag at 0x36 set to 0x1 [ 35.934718] audit: initializing netlink socket (disabled) [ 35.934727] audit(1215038430.324:1): initialized [ 35.934886] highmem bounce pool size: 64 pages [ 35.936631] VFS: Disk quotas dquot_6.5.1 [ 35.936699] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 35.936806] io scheduler noop registered [ 35.936808] io scheduler anticipatory registered [ 35.936810] io scheduler deadline registered [ 35.936819] io scheduler cfq registered (default) [ 35.936847] pci 0000:00:00.0: Enabling HT MSI Mapping [ 35.936979] pci 0000:00:07.0: Enabling HT MSI Mapping [ 35.936993] pci 0000:00:08.0: Enabling HT MSI Mapping [ 35.937007] pci 0000:00:09.0: Enabling HT MSI Mapping [ 35.937022] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 35.937036] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 35.937050] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 35.937063] Boot video device is 0000:00:12.0 [ 35.937166] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 35.937189] assign_interrupt_mode Found MSI capability [ 35.937207] Allocate Port Service[0000:00:0c.0:pcie00] [ 35.937266] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 35.937299] assign_interrupt_mode Found MSI capability [ 35.937314] Allocate Port Service[0000:00:0d.0:pcie00] [ 35.937516] isapnp: Scanning for PnP cards... [ 36.289445] isapnp: No Plug & Play device found [ 36.315397] Real Time Clock Driver v1.12ac [ 36.315564] hpet_resources: 0xfed00000 is busy [ 36.315593] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 36.316642] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 36.316700] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 36.316787] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 36.342311] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 36.342316] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 36.352562] mice: PS/2 mouse device common for all mice [ 36.352670] EISA: Probing bus 0 at eisa.0 [ 36.352676] Cannot allocate resource for EISA slot 1 [ 36.352680] Cannot allocate resource for EISA slot 3 [ 36.352682] Cannot allocate resource for EISA slot 4 [ 36.352694] EISA: Detected 0 cards. [ 36.352696] cpuidle: using governor ladder [ 36.352698] cpuidle: using governor menu [ 36.352769] NET: Registered protocol family 1 [ 36.352790] Using IPI No-Shortcut mode [ 36.352818] registered taskstats version 1 [ 36.352926] Magic number: 0:622:703 [ 36.353049] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 36.353050] EDD information not available. [ 36.353250] Freeing unused kernel memory: 368k freed [ 36.389321] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 37.593309] fuse init (API version 7.9) [ 37.615058] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 37.615064] ACPI: Processor [CPU0] (supports 8 throttling states) [ 37.614305] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 37.614312] ACPI: Processor [CPU1] (supports 8 throttling states) [ 37.615486] ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126] [ 38.039067] usbcore: registered new interface driver usbfs [ 38.039087] usbcore: registered new interface driver hub [ 38.039785] usbcore: registered new device driver usb [ 38.046921] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 38.047265] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 38.047273] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 16 [ 38.047285] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 38.047288] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 38.047539] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 38.047557] ohci_hcd 0000:00:02.0: irq 16, io mem 0xf6486000 [ 38.081376] SCSI subsystem initialized [ 38.104215] usb usb1: configuration #1 chosen from 1 choice [ 38.104237] hub 1-0:1.0: USB hub found [ 38.104245] hub 1-0:1.0: 7 ports detected [ 38.106117] libata version 3.00 loaded. [ 38.206908] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 38.206913] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z018] -> GSI 18 (level, low) -> IRQ 16 [ 38.206924] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 38.206927] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 38.206949] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 38.206960] ohci_hcd 0000:00:04.0: irq 16, io mem 0xf6487000 [ 38.263868] usb usb2: configuration #1 chosen from 1 choice [ 38.263891] hub 2-0:1.0: USB hub found [ 38.263898] hub 2-0:1.0: 2 ports detected [ 38.365458] pata_amd 0000:00:06.0: version 0.3.10 [ 38.365512] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 38.366771] scsi0 : pata_amd [ 38.367463] scsi1 : pata_amd [ 38.367718] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 38.367721] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 38.669005] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 38.701220] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 38.888799] ata1.00: configured for MWDMA2 [ 38.888834] ata2: port disabled. ignoring. [ 38.890243] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5 [ 38.891729] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 38.891739] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 17 [ 38.891771] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 38.891780] ACPI: PCI interrupt for device 0000:00:09.0 disabled [ 38.893039] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 38.893048] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 18 [ 38.893059] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 38.893062] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 38.893089] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 38.893114] ehci_hcd 0000:00:02.1: debug port 1 [ 38.893118] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 38.893127] ehci_hcd 0000:00:02.1: irq 18, io mem 0xf6489000 [ 38.893202] usb 2-1: configuration #1 chosen from 1 choice [ 38.907681] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 38.907782] usb usb3: configuration #1 chosen from 1 choice [ 38.907801] hub 3-0:1.0: USB hub found [ 38.907807] hub 3-0:1.0: 7 ports detected [ 39.015844] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 39.015848] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z019] -> GSI 22 (level, low) -> IRQ 18 [ 39.015859] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 39.015862] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 39.015884] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 39.015909] ehci_hcd 0000:00:04.1: debug port 1 [ 39.015913] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 39.015918] ehci_hcd 0000:00:04.1: irq 18, io mem 0xf6489400 [ 39.031456] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 39.031546] usb usb4: configuration #1 chosen from 1 choice [ 39.031566] hub 4-0:1.0: USB hub found [ 39.031571] hub 4-0:1.0: 2 ports detected [ 39.136659] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 39.136670] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 39.188298] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 39.191317] usb 2-1: USB disconnect, address 2 [ 39.193145] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 39.193465] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 39.193474] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 19 [ 39.193479] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 39.200567] Driver 'sr' needs updating - please use bus_type methods [ 39.244553] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 39.244559] Uniform CD-ROM driver Revision: 3.20 [ 39.244609] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 39.255495] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 39.718609] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:1e:68:09:25:f6 [ 39.718614] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 39.719507] ahci 0000:00:09.0: version 3.0 [ 39.719522] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 17 [ 39.809988] usb 4-2: new high speed USB device using ehci_hcd and address 3 [ 39.968968] usb 4-2: configuration #1 chosen from 1 choice [ 40.273954] usb 2-1: new full speed USB device using ohci_hcd and address 3 [ 40.461711] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00964cac00] [ 40.514763] usb 2-1: configuration #1 chosen from 1 choice [ 40.721119] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 40.721125] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part [ 40.721129] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 40.722025] scsi2 : ahci [ 40.722268] scsi3 : ahci [ 40.722395] scsi4 : ahci [ 40.722524] scsi5 : ahci [ 40.722591] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 221 [ 40.722593] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 221 [ 40.722596] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 221 [ 40.722599] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 221 [ 41.359911] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 41.359840] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100 [ 41.359844] ata3.00: 488397168 sectors, multi 16: LBA48 [ 41.360794] ata3.00: configured for UDMA/100 [ 41.679311] ata4: SATA link down (SStatus 0 SControl 300) [ 41.998709] ata5: SATA link down (SStatus 0 SControl 300) [ 42.318109] ata6: SATA link down (SStatus 0 SControl 300) [ 42.318200] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5 [ 42.318262] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 42.326869] Driver 'sd' needs updating - please use bus_type methods [ 42.326943] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 42.326955] sd 2:0:0:0: [sda] Write Protect is off [ 42.326957] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.326972] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.327015] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 42.327023] sd 2:0:0:0: [sda] Write Protect is off [ 42.327025] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.327037] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.327040] sda: sda1 sda2 sda3 < sda5 sda6 > [ 42.681373] sd 2:0:0:0: [sda] Attached SCSI disk [ 42.985056] Attempting manual resume [ 42.985060] swsusp: Resume From Partition 8:6 [ 42.985062] PM: Checking swsusp image. [ 42.985214] PM: Resume from disk failed. [ 43.028569] kjournald starting. Commit interval 5 seconds [ 43.027720] EXT3-fs: mounted filesystem with ordered data mode. [ 56.063511] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 56.818870] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 56.999719] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 57.229379] ACPI: WMI-Acer: Mapper loaded [ 57.325084] input: Power Button (FF) as /devices/virtual/input/input3 [ 57.385742] ACPI: Power Button (FF) [PWRF] [ 57.528724] ricoh-mmc: Ricoh MMC Controller disabling driver [ 57.528728] ricoh-mmc: Copyright(c) Philip Langdale [ 57.528770] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) [ 57.528778] ricoh-mmc: Controller is now disabled. [ 57.549468] ACPI: Battery Slot [BAT0] (battery present) [ 57.550394] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 57.605348] ACPI: Sleep Button (CM) [SLPB] [ 57.605412] input: Lid Switch as /devices/virtual/input/input5 [ 57.743447] Linux agpgart interface v0.102 [ 57.805512] ACPI: Lid Switch [LID] [ 57.805620] input: Power Button (CM) as /devices/virtual/input/input6 [ 57.860855] ACPI: Power Button (CM) [PWRB] [ 57.860599] ACPI: AC Adapter [ACAD] (off-line) [ 57.862050] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 57.915940] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 58.060165] sdhci: Secure Digital Host Controller Interface driver [ 58.060170] sdhci: Copyright(c) Pierre Ossman [ 58.060213] sdhci: SDHCI controller found at 0000:02:05.1 [1180:0822] (rev 22) [ 58.060533] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 58.060544] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 58.060560] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 58.060603] mmc0: SDHCI at 0xf6100800 irq 7 DMA [ 58.099799] ath_hal: module license 'Proprietary' taints kernel. [ 58.110732] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 58.468675] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 58.468685] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 16 (level, low) -> IRQ 20 [ 58.468693] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 58.468893] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 58.570361] wlan: 0.9.4 [ 58.623245] ath_pci: 0.9.4 [ 58.623597] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 58.623606] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 21 [ 58.623615] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 58.651412] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13) [ 58.651430] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 58.714558] Bluetooth: Core ver 2.11 [ 58.715402] NET: Registered protocol family 31 [ 58.715404] Bluetooth: HCI device and connection manager initialized [ 58.715408] Bluetooth: HCI socket layer initialized [ 58.770011] Linux video capture interface: v2.00 [ 58.773387] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 58.827918] Bluetooth: HCI USB driver ver 2.9 [ 58.829634] usbcore: registered new interface driver hci_usb [ 58.852229] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 58.949414] uvcvideo: Found UVC 1.00 device HP Webcam (0408:030c) [ 58.964752] usbcore: registered new interface driver uvcvideo [ 58.964757] USB Video Class driver (v0.1.0) [ 59.267680] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 59.267690] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 22 [ 59.267712] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 59.763164] loop: module loaded [ 59.862368] lp: driver loaded but no devices found [ 60.032797] Adding 5887780k swap on /dev/sda6. Priority:-1 extents:1 across:5887780k [ 60.054980] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 60.055259] EXT3 FS on sda5, internal journal [ 61.027218] ip_tables: (C) 2000-2006 Netfilter Core Team [ 63.228231] No dock devices found. [ 64.419238] NET: Registered protocol family 10 [ 64.419444] lo: Disabled Privacy Extensions [ 64.876002] ppdev: user-space parallel port driver [ 65.318660] audit(1215038460.667:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5322 profile="/usr/sbin/cupsd" namespace="default" [ 65.455114] apm: BIOS not found. [ 68.496916] eth0: no link during initialization. [ 68.498282] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 93.568453] CPU0 attaching NULL sched-domain. [ 93.568460] CPU1 attaching NULL sched-domain. [ 93.584976] CPU0 attaching sched-domain: [ 93.584980] domain 0: span 03 [ 93.584982] groups: 01 02 [ 93.584985] domain 1: span 03 [ 93.584987] groups: 03 [ 93.584989] CPU1 attaching sched-domain: [ 93.584991] domain 0: span 03 [ 93.584993] groups: 02 01 [ 93.584995] domain 1: span 03 [ 93.584997] groups: 03 > lspci -vv 00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2) Subsystem: Hewlett-Packard Company Unknown device 30cf Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [b8] Subsystem: nVidia Corporation Unknown device cb84 Capabilities: [8c] HyperTransport: MSI Mapping 00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Hewlett-Packard Company Unknown device 30cf Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 41a9 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 2, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable- Address: 00000000fee0300c Data: 41b1 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s <512ns, L1 <4us Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 3, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Unknown device 30cf Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- > Thank you. > > ** This bug is no longer a duplicate of bug 201180 > [hardy] kernel 2.6.24-12 breaks wireless (Atheros AR242x) > > ** Changed in: ubuntu > Assignee: (unassigned) => Fabián Rodríguez (magicfab) > Status: New => Incomplete >