[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262064 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262064 [ 0.000000] On node 0 totalpages: 262064 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32433 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00FB0E0 checksum 0 [ 0.000000] ACPI: RSDP 000FB0E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3FFB0000, 0034 (r1 A M I OEMRSDT 11000715 MSFT 97) [ 0.000000] ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT 3FFB0450, 4603 (r1 ASR52 ASR52017 17 INTL 2002026) [ 0.000000] ACPI: FACS 3FFC0000, 0040 [ 0.000000] ACPI: APIC 3FFB0390, 0078 (r1 A M I OEMAPIC 11000715 MSFT 97) [ 0.000000] ACPI: MCFG 3FFB0410, 003C (r1 A M I OEMMCFG 11000715 MSFT 97) [ 0.000000] ACPI: OEMB 3FFC0040, 0056 (r1 A M I AMI_OEM 11000715 MSFT 97) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 24-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260017 [ 0.000000] Kernel command line: root=UUID=137a9878-fefb-43ba-8a55-58aebf061541 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] mapped IOAPIC to ffff9000 (fec10000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2009.000 MHz processor. [ 30.218632] spurious 8259A interrupt: IRQ7. [ 30.221045] Console: colour VGA+ 80x25 [ 30.221048] console [tty0] enabled [ 30.221432] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 30.221851] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 30.245637] Memory: 1027140k/1048256k available (2157k kernel code, 20408k reserved, 998k data, 364k init, 130752k highmem) [ 30.245644] virtual kernel memory layout: [ 30.245645] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 30.245646] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 30.245648] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 30.245649] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 30.245650] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 30.245651] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 30.245652] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 30.245655] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 30.245691] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 30.325606] Calibrating delay using timer specific routine.. 4020.92 BogoMIPS (lpj=8041849) [ 30.325634] Security Framework initialized [ 30.325640] SELinux: Disabled at boot. [ 30.325656] AppArmor: AppArmor initialized [ 30.325660] Failure registering capabilities with primary security module. [ 30.325668] Mount-cache hash table entries: 512 [ 30.325792] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 30.325801] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 30.325804] CPU: L2 Cache: 512K (64 bytes/line) [ 30.325806] CPU 0(2) -> Core 0 [ 30.325808] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 [ 30.325818] Compat vDSO mapped to ffffe000. [ 30.325829] Checking 'hlt' instruction... OK. [ 30.341879] SMP alternatives: switching to UP code [ 30.343126] Early unpacking initramfs... done [ 30.645506] ACPI: Core revision 20070126 [ 30.645560] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 30.647370] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 30.647386] SMP alternatives: switching to SMP code [ 30.647837] Booting processor 1/1 eip 3000 [ 30.657549] Initializing CPU#1 [ 30.736799] Calibrating delay using timer specific routine.. 4018.32 BogoMIPS (lpj=8036645) [ 30.736806] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 30.736813] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 30.736815] CPU: L2 Cache: 512K (64 bytes/line) [ 30.736817] CPU 1(2) -> Core 1 [ 30.736818] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 [ 30.737292] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 30.737306] Total of 2 processors activated (8039.24 BogoMIPS). [ 30.737547] ENABLING IO-APIC IRQs [ 30.737755] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 30.884982] Brought up 2 CPUs [ 30.885029] CPU0 attaching sched-domain: [ 30.885032] domain 0: span 03 [ 30.885034] groups: 01 02 [ 30.885037] CPU1 attaching sched-domain: [ 30.885038] domain 0: span 03 [ 30.885040] groups: 02 01 [ 30.885231] net_namespace: 64 bytes [ 30.885238] Booting paravirtualized kernel on bare hardware [ 30.885674] Time: 13:48:46 Date: 04/27/08 [ 30.885700] NET: Registered protocol family 16 [ 30.885866] EISA bus registered [ 30.885870] ACPI: bus type pci registered [ 30.886688] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 30.886690] PCI: Using configuration type 1 [ 30.886692] Setting up standard PCI resources [ 30.893902] ACPI: EC: Look up EC in DSDT [ 30.897655] ACPI: Interpreter enabled [ 30.897658] ACPI: (supports S0 S1 S3 S4 S5) [ 30.897670] ACPI: Using IOAPIC for interrupt routing [ 30.898066] Error attaching device data [ 30.898071] Error attaching device data [ 30.898076] Error attaching device data [ 30.898080] Error attaching device data [ 30.904941] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 30.905994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 30.906112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 30.906222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB0._PRT] [ 30.906294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] [ 30.906365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] [ 30.913649] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 30.913813] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 30.913973] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *9 [ 30.914133] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *9 [ 30.914296] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11 [ 30.914454] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9 [ 30.914612] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *11 [ 30.914772] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *3 [ 30.914930] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled. [ 30.915088] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. [ 30.915246] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. [ 30.915405] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. [ 30.915563] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10 [ 30.915725] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled. [ 30.915919] ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14 [ 30.916023] ACPI: Power Resource [ISAV] (on) [ 30.916066] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B6, should be B1 [20070126] [ 30.916072] Linux Plug and Play Support v0.97 (c) Adam Belay [ 30.916097] pnp: PnP ACPI init [ 30.916104] ACPI: bus type pnp registered [ 30.920061] pnp: PnP ACPI: found 14 devices [ 30.920063] ACPI: ACPI bus type pnp unregistered [ 30.920067] PnPBIOS: Disabled by ACPI PNP [ 30.920256] PCI: Using ACPI for IRQ routing [ 30.920259] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 30.940815] NET: Registered protocol family 8 [ 30.940817] NET: Registered protocol family 20 [ 30.940879] AppArmor: AppArmor Filesystem Enabled [ 30.952828] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 30.952831] system 00:06: ioport range 0x4000-0x407f has been reserved [ 30.952834] system 00:06: ioport range 0x4080-0x40ff has been reserved [ 30.952840] system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved [ 30.952843] system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved [ 30.952846] system 00:07: iomem range 0xff380000-0xffffffff could not be reserved [ 30.952848] system 00:07: iomem range 0xfec10000-0xfec10fff has been reserved [ 30.952855] system 00:0b: ioport range 0x290-0x29f has been reserved [ 30.952861] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 30.952866] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 30.952868] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 30.952871] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 30.952874] system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved [ 30.952876] system 00:0d: iomem range 0x0-0x0 could not be reserved [ 30.983188] PCI: Bridge: 0000:00:0b.0 [ 30.983190] IO window: disabled. [ 30.983194] MEM window: disabled. [ 30.983198] PREFETCH window: disabled. [ 30.983202] PCI: Bridge: 0000:00:0e.0 [ 30.983204] IO window: e000-efff [ 30.983207] MEM window: feb00000-febfffff [ 30.983209] PREFETCH window: disabled. [ 30.983213] PCI: Bridge: 0000:00:11.0 [ 30.983214] IO window: disabled. [ 30.983217] MEM window: fc000000-feafffff [ 30.983219] PREFETCH window: d0000000-dfffffff [ 30.983222] PCI: Bridge: 0000:00:12.0 [ 30.983224] IO window: c000-cfff [ 30.983227] MEM window: fbe00000-fbefffff [ 30.983229] PREFETCH window: disabled. [ 30.983232] PCI: Bridge: 0000:00:13.0 [ 30.983234] IO window: d000-dfff [ 30.983237] MEM window: fbf00000-fbffffff [ 30.983239] PREFETCH window: disabled. [ 30.983251] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 30.983264] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 29 (level, low) -> IRQ 16 [ 30.983268] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 30.983277] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 34 (level, low) -> IRQ 17 [ 30.983280] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 30.983288] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 39 (level, low) -> IRQ 18 [ 30.983292] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 30.983304] NET: Registered protocol family 2 [ 30.984751] Time: acpi_pm clocksource has been installed. [ 30.984769] Switched to high resolution mode on CPU 0 [ 30.984589] Switched to high resolution mode on CPU 1 [ 31.020744] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 31.021033] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 31.021983] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 31.022483] TCP: Hash tables configured (established 131072 bind 65536) [ 31.022486] TCP reno registered [ 31.032796] checking if image is initramfs... it is [ 31.617522] Freeing initrd memory: 7270k freed [ 31.618076] audit: initializing netlink socket (disabled) [ 31.618091] audit(1209304127.272:1): initialized [ 31.618243] highmem bounce pool size: 64 pages [ 31.620046] VFS: Disk quotas dquot_6.5.1 [ 31.620114] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 31.620228] io scheduler noop registered [ 31.620230] io scheduler anticipatory registered [ 31.620232] io scheduler deadline registered [ 31.620241] io scheduler cfq registered (default) [ 31.620296] Boot video device is 0000:03:00.0 [ 31.620414] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 31.620437] assign_interrupt_mode Found MSI capability [ 31.620457] Allocate Port Service[0000:00:11.0:pcie00] [ 31.620521] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 31.620543] assign_interrupt_mode Found MSI capability [ 31.620567] Allocate Port Service[0000:00:12.0:pcie00] [ 31.620628] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 31.620649] assign_interrupt_mode Found MSI capability [ 31.620664] Allocate Port Service[0000:00:13.0:pcie00] [ 31.620885] isapnp: Scanning for PnP cards... [ 31.974323] isapnp: No Plug & Play device found [ 32.001573] Real Time Clock Driver v1.12ac [ 32.001690] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 32.001809] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.002393] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.003368] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 32.003432] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 32.003522] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 32.005990] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 32.005995] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 32.020044] mice: PS/2 mouse device common for all mice [ 32.020170] EISA: Probing bus 0 at eisa.0 [ 32.020184] Cannot allocate resource for EISA slot 4 [ 32.020186] Cannot allocate resource for EISA slot 5 [ 32.020195] EISA: Detected 0 cards. [ 32.020198] cpuidle: using governor ladder [ 32.020200] cpuidle: using governor menu [ 32.020284] NET: Registered protocol family 1 [ 32.020306] Using IPI No-Shortcut mode [ 32.020340] registered taskstats version 1 [ 32.020464] Magic number: 4:183:838 [ 32.020550] hash matches device ptyu4 [ 32.020614] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 32.020616] EDD information not available. [ 32.020890] Freeing unused kernel memory: 364k freed [ 32.063250] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 33.267277] fuse init (API version 7.9) [ 33.288897] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 33.288910] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 33.673076] usbcore: registered new interface driver usbfs [ 33.673100] usbcore: registered new interface driver hub [ 33.673123] usbcore: registered new device driver usb [ 33.674021] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 33.674335] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 33.674344] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 19 [ 33.674356] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 33.674359] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 33.674677] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 33.674695] ohci_hcd 0000:00:02.0: irq 19, io mem 0xfbdfd000 [ 33.706190] SCSI subsystem initialized [ 33.713354] libata version 3.00 loaded. [ 33.730898] usb usb1: configuration #1 chosen from 1 choice [ 33.730921] hub 1-0:1.0: USB hub found [ 33.730929] hub 1-0:1.0: 4 ports detected [ 33.833009] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21 [ 33.833021] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, low) -> IRQ 20 [ 33.833033] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 33.833037] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 33.833064] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 33.833080] ohci_hcd 0000:00:02.1: irq 20, io mem 0xfbdfe000 [ 33.890649] usb usb2: configuration #1 chosen from 1 choice [ 33.890674] hub 2-0:1.0: USB hub found [ 33.890681] hub 2-0:1.0: 4 ports detected [ 33.992744] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 [ 33.992755] ACPI: PCI Interrupt 0000:05:05.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 21 [ 33.992770] ohci_hcd 0000:05:05.0: OHCI Host Controller [ 33.992795] ohci_hcd 0000:05:05.0: new USB bus registered, assigned bus number 3 [ 33.992812] ohci_hcd 0000:05:05.0: irq 21, io mem 0xfebff000 [ 33.993040] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 [ 33.993046] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 22 [ 33.993052] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 33.993055] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 33.993076] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 4 [ 33.993106] ehci_hcd 0000:00:02.2: debug port 1 [ 33.993110] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 33.993117] ehci_hcd 0000:00:02.2: irq 22, io mem 0xfbdffc00 [ 34.050385] usb usb3: configuration #1 chosen from 1 choice [ 34.050406] hub 3-0:1.0: USB hub found [ 34.050412] hub 3-0:1.0: 2 ports detected [ 34.136171] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 34.148149] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 34.152970] usb usb4: configuration #1 chosen from 1 choice [ 34.152994] hub 4-0:1.0: USB hub found [ 34.153003] hub 4-0:1.0: 8 ports detected [ 34.256266] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 34.256574] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 [ 34.256577] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 19 [ 34.256594] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 34.256601] ACPI: PCI interrupt for device 0000:00:0a.0 disabled [ 34.256626] PCI: Enabling device 0000:01:00.1 (0000 -> 0001) [ 34.256635] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 31 (level, low) -> IRQ 23 [ 34.256654] PCI: Setting latency timer of device 0000:01:00.1 to 64 [ 34.256663] ACPI: PCI interrupt for device 0000:01:00.1 disabled [ 34.256455] r8169 Gigabit Ethernet driver 2.2LK loaded [ 34.256488] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 35 (level, low) -> IRQ 24 [ 34.256504] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 34.256799] eth0: RTL8168b/8111b at 0xf8826000, 00:19:66:5a:cb:f3, XID 38000000 IRQ 220 [ 34.259081] ahci 0000:01:00.0: version 3.0 [ 34.259102] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 30 (level, low) -> IRQ 25 [ 34.571535] usb 4-1: new high speed USB device using ehci_hcd and address 2 [ 34.705582] usb 4-1: configuration #1 chosen from 1 choice [ 34.720350] usbcore: registered new interface driver libusual [ 34.726064] Initializing USB Mass Storage driver... [ 34.727271] scsi0 : SCSI emulation for USB Mass Storage devices [ 34.727335] usbcore: registered new interface driver usb-storage [ 34.727338] USB Mass Storage support registered. [ 34.727429] usb-storage: device found at 2 [ 34.727430] usb-storage: waiting for device to settle before scanning [ 35.258546] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 35.258552] ahci 0000:01:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 35.258558] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 35.258750] scsi1 : ahci [ 35.258996] scsi2 : ahci [ 35.259050] ata1: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 25 [ 35.259054] ata2: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 25 [ 35.578827] ata1: SATA link down (SStatus 0 SControl 300) [ 35.898365] ata2: SATA link down (SStatus 0 SControl 300) [ 35.899667] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 31 (level, low) -> IRQ 23 [ 35.899712] PCI: Setting latency timer of device 0000:01:00.1 to 64 [ 35.899760] scsi3 : pata_jmicron [ 35.899817] scsi4 : pata_jmicron [ 35.899840] ata3: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23 [ 35.899843] ata4: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23 [ 35.900112] pata_amd 0000:00:08.0: version 0.3.10 [ 35.900168] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 35.901369] scsi5 : pata_amd [ 35.901957] scsi6 : pata_amd [ 35.902526] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 35.902529] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 36.066534] ata5.00: ATA-5: WDC WD400EB-75CPF0, 06.04G06, max UDMA/100 [ 36.066538] ata5.00: 78165360 sectors, multi 16: LBA [ 36.066549] ata5.00: limited to UDMA/33 due to 40-wire cable [ 36.083402] ata5.00: configured for UDMA/33 [ 36.401012] ata6.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.00, max UDMA/66 [ 36.401025] ata6.00: limited to UDMA/33 due to 40-wire cable [ 36.573690] ata6.00: configured for UDMA/33 [ 36.573792] scsi 5:0:0:0: Direct-Access ATA WDC WD400EB-75CP 06.0 PQ: 0 ANSI: 5 [ 36.575208] scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.00 PQ: 0 ANSI: 5 [ 36.575526] sata_nv 0000:00:0a.0: version 3.5 [ 36.575542] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 19 [ 36.575580] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 36.575724] scsi7 : sata_nv [ 36.575861] scsi8 : sata_nv [ 36.576332] ata7: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xb000 irq 19 [ 36.576335] ata8: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xb008 irq 19 [ 36.884936] ata7: SATA link down (SStatus 0 SControl 300) [ 37.196482] ata8: SATA link down (SStatus 0 SControl 300) [ 37.208202] Driver 'sd' needs updating - please use bus_type methods [ 37.208293] sd 5:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 37.208304] sd 5:0:0:0: [sda] Write Protect is off [ 37.208307] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 37.208322] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.208364] sd 5:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 37.208372] sd 5:0:0:0: [sda] Write Protect is off [ 37.208374] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 37.208387] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.208390] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 37.224651] sda1 sda2 sda3 sda4 [ 37.256299] sd 5:0:0:0: [sda] Attached SCSI disk [ 37.261348] sd 5:0:0:0: Attached scsi generic sg0 type 0 [ 37.261368] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 37.266081] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 37.266085] Uniform CD-ROM driver Revision: 3.20 [ 37.266125] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 37.758930] Attempting manual resume [ 37.758935] swsusp: Resume From Partition 8:4 [ 37.758937] PM: Checking swsusp image. [ 37.759170] PM: Resume from disk failed. [ 37.803021] kjournald starting. Commit interval 5 seconds [ 37.802795] EXT3-fs: mounted filesystem with ordered data mode. [ 39.716947] usb-storage: device scan complete [ 39.718174] scsi 0:0:0:0: Direct-Access Ut163 USB2FlashStorage 0.00 PQ: 0 ANSI: 2 [ 39.719402] sd 0:0:0:0: [sdb] 3948543 512-byte hardware sectors (2022 MB) [ 39.720151] sd 0:0:0:0: [sdb] Write Protect is off [ 39.720153] sd 0:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 39.720155] sd 0:0:0:0: [sdb] Assuming drive cache: write through [ 39.723021] sd 0:0:0:0: [sdb] 3948543 512-byte hardware sectors (2022 MB) [ 39.723770] sd 0:0:0:0: [sdb] Write Protect is off [ 39.723772] sd 0:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 39.723774] sd 0:0:0:0: [sdb] Assuming drive cache: write through [ 39.723776] sdb: sdb1 [ 39.825075] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 39.825102] sd 0:0:0:0: Attached scsi generic sg2 type 0 [ 49.967835] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 50.058078] parport_pc 00:05: reported by Plug and Play ACPI [ 50.058134] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 50.129918] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 50.150670] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 50.189219] Linux agpgart interface v0.102 [ 50.269156] agpgart: Detected AGP bridge 0 [ 50.269177] agpgart: Setting up Nforce3 AGP. [ 50.272161] agpgart: AGP aperture is 64M @ 0xcc000000 [ 50.336963] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 50.336982] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040 [ 50.341415] input: Power Button (FF) as /devices/virtual/input/input3 [ 50.389462] ACPI: Power Button (FF) [PWRF] [ 50.389548] input: Power Button (CM) as /devices/virtual/input/input4 [ 50.421423] ACPI: Power Button (CM) [PWRB] [ 50.692248] logips2pp: Detected unknown logitech mouse model 116 [ 51.165636] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5 [ 51.211831] nvidia: module license 'NVIDIA' taints kernel. [ 51.470333] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 25 (level, low) -> IRQ 26 [ 51.470344] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 51.470606] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 51.502037] r8169: eth0: link up [ 51.901904] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 [ 51.901914] ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [LNKC] -> GSI 18 (level, low) -> IRQ 27 [ 51.903035] azt3328: Sound driver for Aztech AZF3328-based soundcards such as PCI168. [ 51.903036] azt3328: Hardware was completely undocumented, unfortunately. [ 51.903038] azt3328: Feel free to contact andi AT lisas.de for bug reports etc.! [ 51.903039] azt3328: User-scalable sequencer timer set to 8000Hz (1024000Hz / 128). [ 52.857498] NET: Registered protocol family 17 [ 53.004003] lp0: using parport0 (interrupt-driven). [ 53.198551] Adding 1367180k swap on /dev/sda4. Priority:-1 extents:1 across:1367180k [ 53.850259] EXT3 FS on sda2, internal journal [ 54.693563] kjournald starting. Commit interval 5 seconds [ 54.693784] EXT3 FS on sda3, internal journal [ 54.693789] EXT3-fs: mounted filesystem with ordered data mode. [ 55.415199] ip_tables: (C) 2000-2006 Netfilter Core Team [ 55.906286] No dock devices found. [ 56.204597] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 56.204840] powernow-k8: MP systems not supported by PSB BIOS structure [ 56.204644] powernow-k8: MP systems not supported by PSB BIOS structure [ 57.896257] ppdev: user-space parallel port driver [ 58.062751] audit(1209296954.180:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5256 profile="/usr/sbin/cupsd" namespace="default" [ 58.096916] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) [ 58.096921] apm: disabled - APM is not SMP safe. [ 58.347934] Bluetooth: Core ver 2.11 [ 58.348421] NET: Registered protocol family 31 [ 58.348424] Bluetooth: HCI device and connection manager initialized [ 58.348428] Bluetooth: HCI socket layer initialized [ 58.377552] Bluetooth: L2CAP ver 2.9 [ 58.377558] Bluetooth: L2CAP socket layer initialized [ 58.445432] Bluetooth: RFCOMM socket layer initialized [ 58.445449] Bluetooth: RFCOMM TTY layer initialized [ 58.445450] Bluetooth: RFCOMM ver 1.8 [ 75.771909] NET: Registered protocol family 10 [ 75.772140] lo: Disabled Privacy Extensions [ 86.045777] eth0: no IPv6 routers present [ 118.034393] NETDEV WATCHDOG: eth0: transmit timed out [ 118.050507] r8169: eth0: link up