2008-04-24 20:00:16 |
Jan Frybort |
bug |
|
|
added bug |
2008-04-27 11:50:30 |
Kjell Braden |
linux: status |
New |
Confirmed |
|
2008-04-27 12:07:05 |
Kjell Braden |
bug |
|
|
added attachment 'uname-a.log' (uname-a.log) |
2008-04-27 12:07:24 |
Kjell Braden |
bug |
|
|
added attachment 'version.log' (version.log) |
2008-04-27 12:07:34 |
Kjell Braden |
bug |
|
|
added attachment 'dmesg.log' (dmesg.log) |
2008-04-27 12:07:46 |
Kjell Braden |
bug |
|
|
added attachment 'lspci-vvnn.log' (lspci-vvnn.log) |
2008-05-12 20:03:13 |
Andrea Colangelo |
linux: importance |
Undecided |
Medium |
|
2008-06-18 12:32:39 |
Kjell Braden |
linux: assignee |
|
ubuntu-kernel-team |
|
2008-06-18 21:20:50 |
Kjell Braden |
description |
Ubuntu Hardy final release. My NIC RTL8111/8168B does not receive an IP address. After starting the computer, icon of the NetworkManager is animated. When it stops the wired network is reported as connected but there are all zeros (IP address, gateway, etc.) I booted from Gutsy CD and the NIC worked correctly.
Output from lspci -vvnn from Hardy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 509
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Output from lspci -vvnn from Gutsy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
ifconfig from Hardy
eth0 Link encap:Ethernet HWaddr 00:1b:fc:9d:72:9f
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:63 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:253
ifconfig from Gutsy
eth0 Link encap:Ethernet HWaddr 00:1B:FC:9D:72:9F
inet addr:147.32.112.20 Bcast:147.32.112.255 Mask:255.255.255.0
inet6 addr: 2001:718:2:21:21b:fcff:fe9d:729f/64 Scope:Global
inet6 addr: fe80::21b:fcff:fe9d:729f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1267 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:128133 (125.1 KB) TX bytes:6628 (6.4 KB)
Interrupt:18 Base address:0x8000 |
Ubuntu Hardy final release. My NIC RTL8111/8168B does not receive an IP address. After starting the computer, icon of the NetworkManager is animated. When it stops the wired network is reported as connected but there are all zeros (IP address, gateway, etc.) I booted from Gutsy CD and the NIC worked correctly.
Output from lspci -vvnn from Hardy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 509
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Output from lspci -vvnn from Gutsy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
ifconfig from Hardy
eth0 Link encap:Ethernet HWaddr 00:1b:fc:9d:72:9f
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:63 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:253
ifconfig from Gutsy
eth0 Link encap:Ethernet HWaddr 00:1B:FC:9D:72:9F
inet addr:147.32.112.20 Bcast:147.32.112.255 Mask:255.255.255.0
inet6 addr: 2001:718:2:21:21b:fcff:fe9d:729f/64 Scope:Global
inet6 addr: fe80::21b:fcff:fe9d:729f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1267 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:128133 (125.1 KB) TX bytes:6628 (6.4 KB)
Interrupt:18 Base address:0x8000
TEST CASE:
1. find the card in lspci
2. notice that ifconfig lists the interface
3. check your connection (eg. sudo dhclient3)
4. notice that you don't receive any packets at all
LATEST VERSION TESTED:
Regression since 2.6.24-16, still does not work in 2.6.24-18 (tested by Raptor Ramjet, see comment 10) |
|
2008-06-18 21:39:36 |
Kjell Braden |
linux: importance |
Medium |
High |
|
2008-06-19 11:46:46 |
Kjell Braden |
description |
Ubuntu Hardy final release. My NIC RTL8111/8168B does not receive an IP address. After starting the computer, icon of the NetworkManager is animated. When it stops the wired network is reported as connected but there are all zeros (IP address, gateway, etc.) I booted from Gutsy CD and the NIC worked correctly.
Output from lspci -vvnn from Hardy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 509
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Output from lspci -vvnn from Gutsy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
ifconfig from Hardy
eth0 Link encap:Ethernet HWaddr 00:1b:fc:9d:72:9f
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:63 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:253
ifconfig from Gutsy
eth0 Link encap:Ethernet HWaddr 00:1B:FC:9D:72:9F
inet addr:147.32.112.20 Bcast:147.32.112.255 Mask:255.255.255.0
inet6 addr: 2001:718:2:21:21b:fcff:fe9d:729f/64 Scope:Global
inet6 addr: fe80::21b:fcff:fe9d:729f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1267 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:128133 (125.1 KB) TX bytes:6628 (6.4 KB)
Interrupt:18 Base address:0x8000
TEST CASE:
1. find the card in lspci
2. notice that ifconfig lists the interface
3. check your connection (eg. sudo dhclient3)
4. notice that you don't receive any packets at all
LATEST VERSION TESTED:
Regression since 2.6.24-16, still does not work in 2.6.24-18 (tested by Raptor Ramjet, see comment 10) |
Ubuntu Hardy final release. My NIC RTL8111/8168B does not receive an IP address. After starting the computer, icon of the NetworkManager is animated. When it stops the wired network is reported as connected but there are all zeros (IP address, gateway, etc.) I booted from Gutsy CD and the NIC worked correctly.
Output from lspci -vvnn from Hardy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 509
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Output from lspci -vvnn from Gutsy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
ifconfig from Hardy
eth0 Link encap:Ethernet HWaddr 00:1b:fc:9d:72:9f
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:63 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:253
ifconfig from Gutsy
eth0 Link encap:Ethernet HWaddr 00:1B:FC:9D:72:9F
inet addr:147.32.112.20 Bcast:147.32.112.255 Mask:255.255.255.0
inet6 addr: 2001:718:2:21:21b:fcff:fe9d:729f/64 Scope:Global
inet6 addr: fe80::21b:fcff:fe9d:729f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1267 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:128133 (125.1 KB) TX bytes:6628 (6.4 KB)
Interrupt:18 Base address:0x8000
TEST CASE:
1. find the card in lspci
2. notice that ifconfig lists the interface
3. check your connection (eg. sudo dhclient3)
4. notice that you don't receive any packets at all
LATEST VERSION TESTED:
Regression since 2.6.24-16, still does not work in 2.6.24-19.33. |
|
2008-06-23 12:43:06 |
Kjell Braden |
linux: status |
Confirmed |
Fix Released |
|
2008-06-23 13:04:57 |
Kjell Braden |
description |
Ubuntu Hardy final release. My NIC RTL8111/8168B does not receive an IP address. After starting the computer, icon of the NetworkManager is animated. When it stops the wired network is reported as connected but there are all zeros (IP address, gateway, etc.) I booted from Gutsy CD and the NIC worked correctly.
Output from lspci -vvnn from Hardy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 509
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Output from lspci -vvnn from Gutsy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
ifconfig from Hardy
eth0 Link encap:Ethernet HWaddr 00:1b:fc:9d:72:9f
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:63 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:253
ifconfig from Gutsy
eth0 Link encap:Ethernet HWaddr 00:1B:FC:9D:72:9F
inet addr:147.32.112.20 Bcast:147.32.112.255 Mask:255.255.255.0
inet6 addr: 2001:718:2:21:21b:fcff:fe9d:729f/64 Scope:Global
inet6 addr: fe80::21b:fcff:fe9d:729f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1267 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:128133 (125.1 KB) TX bytes:6628 (6.4 KB)
Interrupt:18 Base address:0x8000
TEST CASE:
1. find the card in lspci
2. notice that ifconfig lists the interface
3. check your connection (eg. sudo dhclient3)
4. notice that you don't receive any packets at all
LATEST VERSION TESTED:
Regression since 2.6.24-16, still does not work in 2.6.24-19.33. |
Ubuntu Hardy final release. My NIC RTL8111/8168B does not receive an IP address. After starting the computer, icon of the NetworkManager is animated. When it stops the wired network is reported as connected but there are all zeros (IP address, gateway, etc.) I booted from Gutsy CD and the NIC worked correctly.
Output from lspci -vvnn from Hardy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 509
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Output from lspci -vvnn from Gutsy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
ifconfig from Hardy
eth0 Link encap:Ethernet HWaddr 00:1b:fc:9d:72:9f
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:63 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:253
ifconfig from Gutsy
eth0 Link encap:Ethernet HWaddr 00:1B:FC:9D:72:9F
inet addr:147.32.112.20 Bcast:147.32.112.255 Mask:255.255.255.0
inet6 addr: 2001:718:2:21:21b:fcff:fe9d:729f/64 Scope:Global
inet6 addr: fe80::21b:fcff:fe9d:729f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1267 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:128133 (125.1 KB) TX bytes:6628 (6.4 KB)
Interrupt:18 Base address:0x8000
TEST CASE:
1. find the card in lspci
2. notice that ifconfig lists the interface
3. check your connection (eg. sudo dhclient3)
4. notice that you don't receive any packets at all
LATEST VERSION TESTED:
Regression since 2.6.24-16, still does not work in 2.6.24-19.33.
Works with 2.6.26-2.6. Did not test 2.6.26-1.* |
|
2008-07-22 21:50:12 |
Francesco Pretto |
bug |
|
|
added attachment 'interrupts-8.04.01' (/proc/interrupts from livecd ubuntu 8.04.01, eth0 NOT working) |
2008-07-22 21:51:33 |
Francesco Pretto |
bug |
|
|
added attachment 'interrupts-7.10' (/proc/interrupts from livecd ubuntu 7.10, eth0 works) |
2008-07-22 22:10:15 |
Francesco Pretto |
linux: status |
Fix Released |
Confirmed |
|
2008-07-23 01:10:58 |
Kjell Braden |
linux: status |
Confirmed |
Fix Released |
|
2008-07-29 09:21:26 |
Francesco Pretto |
bug |
|
|
added attachment 'dmidecode' (sudo dmidecode) |
2008-07-29 09:21:54 |
Francesco Pretto |
bug |
|
|
added attachment 'lspci-t' (lspci -t) |
2008-07-29 09:22:26 |
Francesco Pretto |
bug |
|
|
added attachment 'lspci-vvnn' (sudo lspci -vvnn) |
2008-07-29 14:05:13 |
sfikas |
bug |
|
|
added attachment 'Text File' (Text File) |
2008-07-29 18:20:02 |
Raptor Ramjet |
bug |
|
|
added attachment 'RTL811_Diagnostics.txt' (RTL811_Diagnostics.txt) |
2008-07-30 00:41:24 |
sfikas |
bug |
|
|
added attachment 'Text File_gutsy' (Text File_gutsy) |
2008-07-30 21:36:56 |
dariosicily |
bug |
|
|
added attachment 'lspci -vvnn' (lspci -vvnn) |
2008-07-30 21:37:41 |
dariosicily |
bug |
|
|
added attachment 'sudo dmidecode' (sudo dmidecode) |
2010-08-16 01:43:40 |
aalhadsaraf |
linux (Ubuntu): status |
Fix Released |
Incomplete |
|
2010-08-16 01:44:20 |
aalhadsaraf |
linux (Ubuntu): status |
Incomplete |
Fix Released |
|
2010-08-16 08:14:08 |
UeB |
removed subscriber UeB |
|
|
|
2010-09-30 09:21:05 |
vedavata |
bug |
|
|
added subscriber vedavata |
2011-08-07 12:45:07 |
Tobias Bradtke |
bug |
|
|
added subscriber Tobias Bradtke |
2012-07-27 17:06:42 |
Kjell Braden |
removed subscriber Kjell Braden |
|
|
|