[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] Command line: root=UUID=8a5ce0a2-6f04-442c-9509-435c0dd02eae ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1294336 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F68D0 checksum 0 [ 0.000000] ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT BF6BB74D, 0094 (r1 LENOVO TP-7L 2120 LTP 0) [ 0.000000] ACPI: FACP BF6BB800, 00F4 (r3 LENOVO TP-7L 2120 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT BF6BBC1D, FF03 (r1 LENOVO TP-7L 2120 MSFT 3000000) [ 0.000000] ACPI: FACS BF6E4000, 0040 [ 0.000000] ACPI: SSDT BF6BB9B4, 0269 (r1 LENOVO TP-7L 2120 MSFT 3000000) [ 0.000000] ACPI: ECDT BF6CBB20, 0052 (r1 LENOVO TP-7L 2120 LNVO 1) [ 0.000000] ACPI: TCPA BF6CBB72, 0032 (r2 LENOVO TP-7L 2120 LNVO 1) [ 0.000000] ACPI: APIC BF6CBBA4, 0068 (r1 LENOVO TP-7L 2120 LNVO 1) [ 0.000000] ACPI: MCFG BF6CBC0C, 003C (r1 LENOVO TP-7L 2120 LNVO 1) [ 0.000000] ACPI: HPET BF6CBC48, 0038 (r1 LENOVO TP-7L 2120 LNVO 1) [ 0.000000] ACPI: SLIC BF6CBDF0, 0176 (r1 LENOVO TP-7L 2120 LTP 0) [ 0.000000] ACPI: BOOT BF6CBF66, 0028 (r1 LENOVO TP-7L 2120 LTP 1) [ 0.000000] ACPI: ASF! BF6CBF8E, 0072 (r16 LENOVO TP-7L 2120 PTL 1) [ 0.000000] ACPI: SSDT BF6E271B, 025F (r1 LENOVO TP-7L 2120 INTL 20050513) [ 0.000000] ACPI: SSDT BF6E297A, 00A6 (r1 LENOVO TP-7L 2120 INTL 20050513) [ 0.000000] ACPI: SSDT BF6E2A20, 04F7 (r1 LENOVO TP-7L 2120 INTL 20050513) [ 0.000000] ACPI: SSDT BF6E2F17, 01D8 (r1 LENOVO TP-7L 2120 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013c000000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000013c000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1294336 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 784048 [ 0.000000] 0: 1048576 -> 1294336 [ 0.000000] On node 0 totalpages: 1029709 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1210 pages reserved [ 0.000000] DMA zone: 2731 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6b0000 - 00000000bf6cc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6cc000 - 00000000bf700000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf700000 - 00000000c0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:30000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1010803 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=8a5ce0a2-6f04-442c-9509-435c0dd02eae ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 12.712655] Marking TSC unstable due to TSCs unsynchronized [ 12.712660] time.c: Detected 2393.994 MHz processor. [ 12.714193] Console: colour VGA+ 80x25 [ 12.714201] console [tty0] enabled [ 12.714253] Checking aperture... [ 12.714280] Calgary: detecting Calgary via BIOS EBDA area [ 12.714284] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 12.714288] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 12.779497] Placing software IO TLB between 0x103b000 - 0x503b000 [ 12.852645] Memory: 3969480k/5177344k available (2466k kernel code, 149356k reserved, 1309k data, 316k init) [ 12.852709] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 12.930262] Calibrating delay using timer specific routine.. 4797.90 BogoMIPS (lpj=9595814) [ 12.930324] Security Framework initialized [ 12.930336] SELinux: Disabled at boot. [ 12.930360] AppArmor: AppArmor initialized [ 12.930368] Failure registering capabilities with primary security module. [ 12.931281] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 12.935820] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 12.937875] Mount-cache hash table entries: 256 [ 12.938136] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.938142] CPU: L2 cache: 3072K [ 12.938147] CPU 0/0 -> Node 0 [ 12.938150] using mwait in idle threads. [ 12.938154] CPU: Physical Processor ID: 0 [ 12.938157] CPU: Processor Core ID: 0 [ 12.938171] CPU0: Thermal monitoring enabled (TM2) [ 12.938199] SMP alternatives: switching to UP code [ 12.940054] Early unpacking initramfs... done [ 13.798279] ACPI: Core revision 20070126 [ 13.798444] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.871266] Using local APIC timer interrupts. [ 13.912974] APIC timer calibration result 12468709 [ 13.912978] Detected 12.468 MHz APIC timer. [ 13.913137] SMP alternatives: switching to SMP code [ 13.914751] Booting processor 1/2 APIC 0x1 [ 13.925975] Initializing CPU#1 [ 14.004994] Calibrating delay using timer specific routine.. 4788.04 BogoMIPS (lpj=9576081) [ 14.005008] CPU: L1 I cache: 32K, L1 D cache: 32K [ 14.005011] CPU: L2 cache: 3072K [ 14.005016] CPU 1/1 -> Node 0 [ 14.005019] CPU: Physical Processor ID: 0 [ 14.005021] CPU: Processor Core ID: 1 [ 14.005034] CPU1: Thermal monitoring enabled (TM2) [ 14.006229] Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 14.006109] Brought up 2 CPUs [ 14.006254] CPU0 attaching sched-domain: [ 14.006259] domain 0: span 03 [ 14.006262] groups: 01 02 [ 14.006268] domain 1: span 03 [ 14.006271] groups: 03 [ 14.006275] CPU1 attaching sched-domain: [ 14.006278] domain 0: span 03 [ 14.006281] groups: 02 01 [ 14.006286] domain 1: span 03 [ 14.006288] groups: 03 [ 14.006709] net_namespace: 120 bytes [ 14.007534] Time: 15:05:34 Date: 04/17/08 [ 14.007581] NET: Registered protocol family 16 [ 14.007988] ACPI: bus type pci registered [ 14.008145] PCI: Using configuration type 1 [ 14.011950] ACPI: EC: EC description table is found, configuring boot EC [ 14.023187] ACPI: BIOS _OSI(Linux) query honored via DMI [ 14.024780] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 14.108300] ACPI: Interpreter enabled [ 14.108305] ACPI: (supports S0 S3 S4 S5) [ 14.108337] ACPI: Using IOAPIC for interrupt routing [ 14.129114] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 14.129119] ACPI: EC: driver started in poll mode [ 14.129517] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.132680] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 14.132689] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 14.135713] PCI: Transparent bridge - 0000:00:1e.0 [ 14.135989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.136486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 14.136799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 14.137110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 14.137421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 14.137737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 14.138059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 14.146770] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 14.147279] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 14.147783] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 14.148288] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 14.148799] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 14.149303] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 14.149805] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 14.150316] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 14.150676] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 14.150837] ACPI: Power Resource [PUBS] (on) [ 14.150962] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.151021] pnp: PnP ACPI init [ 14.151035] ACPI: bus type pnp registered [ 14.154024] pnpacpi: exceeded the max number of mem resources: 12 [ 14.161989] pnp: PnP ACPI: found 11 devices [ 14.161994] ACPI: ACPI bus type pnp unregistered [ 14.162474] PCI: Using ACPI for IRQ routing [ 14.162479] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.172579] NET: Registered protocol family 8 [ 14.172583] NET: Registered protocol family 20 [ 14.172651] PCI-GART: No AMD northbridge found. [ 14.172664] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 14.172671] hpet0: 3 64-bit timers, 14318180 Hz [ 14.173737] AppArmor: AppArmor Filesystem Enabled [ 14.176534] Time: hpet clocksource has been installed. [ 14.176554] Switched to high resolution mode on CPU 0 [ 14.177968] Switched to high resolution mode on CPU 1 [ 14.184533] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 14.184539] system 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 14.184544] system 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 14.184549] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 14.184554] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 14.184559] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 14.184564] system 00:00: iomem range 0x0-0x0 could not be reserved [ 14.184569] system 00:00: iomem range 0x0-0x0 could not be reserved [ 14.184574] system 00:00: iomem range 0x0-0x0 could not be reserved [ 14.184579] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 14.184585] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 14.184590] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 14.184606] system 00:02: ioport range 0x164e-0x164f has been reserved [ 14.184611] system 00:02: ioport range 0x1000-0x107f has been reserved [ 14.184617] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 14.184622] system 00:02: ioport range 0x800-0x80f has been reserved [ 14.184627] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 14.184632] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 14.184639] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 14.184645] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 14.184651] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 14.184656] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 14.184662] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved [ 14.184668] system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved [ 14.185571] PCI: Bridge: 0000:00:1c.0 [ 14.185579] IO window: 2000-2fff [ 14.185595] MEM window: fc000000-fdffffff [ 14.185606] PREFETCH window: f8000000-f80fffff [ 14.185623] PCI: Bridge: 0000:00:1c.1 [ 14.185630] IO window: 3000-3fff [ 14.185645] MEM window: dc000000-df3fffff [ 14.185657] PREFETCH window: dfe00000-dfefffff [ 14.185673] PCI: Bridge: 0000:00:1c.2 [ 14.185680] IO window: 4000-4fff [ 14.185695] MEM window: d8000000-d9ffffff [ 14.185707] PREFETCH window: dfb00000-dfbfffff [ 14.185723] PCI: Bridge: 0000:00:1c.3 [ 14.185730] IO window: 5000-5fff [ 14.185745] MEM window: d4000000-d5ffffff [ 14.185756] PREFETCH window: df800000-df8fffff [ 14.185772] PCI: Bridge: 0000:00:1c.4 [ 14.185779] IO window: 6000-6fff [ 14.185795] MEM window: d0000000-d1ffffff [ 14.185806] PREFETCH window: df500000-df5fffff [ 14.185828] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 14.185832] IO window: 00007000-000070ff [ 14.185844] IO window: 00007400-000074ff [ 14.185856] PREFETCH window: f4000000-f7ffffff [ 14.185869] MEM window: c4000000-c7ffffff [ 14.185880] PCI: Bridge: 0000:00:1e.0 [ 14.185887] IO window: 7000-afff [ 14.185902] MEM window: f8300000-fbffffff [ 14.185913] PREFETCH window: f4000000-f7ffffff [ 14.185999] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 14.186014] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.186084] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 14.186099] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 14.186168] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 14.186183] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 14.186253] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 14.186267] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 14.186336] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20 [ 14.186350] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 14.186381] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 14.186398] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 14.186443] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.186458] PCI: Setting latency timer of device 0000:15:00.0 to 64 [ 14.186478] NET: Registered protocol family 2 [ 14.220705] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.223261] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 14.230965] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 14.231988] TCP: Hash tables configured (established 524288 bind 65536) [ 14.231993] TCP reno registered [ 14.240668] checking if image is initramfs... it is [ 15.928530] Freeing initrd memory: 7504k freed [ 15.934914] Simple Boot Flag at 0x35 set to 0x1 [ 15.936776] audit: initializing netlink socket (disabled) [ 15.936810] audit(1208444735.104:1): initialized [ 15.941392] VFS: Disk quotas dquot_6.5.1 [ 15.941554] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 15.941793] io scheduler noop registered [ 15.941797] io scheduler anticipatory registered [ 15.941800] io scheduler deadline registered [ 15.942005] io scheduler cfq registered (default) [ 15.942023] Boot video device is 0000:00:02.0 [ 15.951139] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 15.951319] assign_interrupt_mode Found MSI capability [ 15.951462] Allocate Port Service[0000:00:1c.0:pcie00] [ 15.951537] Allocate Port Service[0000:00:1c.0:pcie02] [ 15.951815] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 15.951994] assign_interrupt_mode Found MSI capability [ 15.952133] Allocate Port Service[0000:00:1c.1:pcie00] [ 15.952201] Allocate Port Service[0000:00:1c.1:pcie02] [ 15.952483] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 15.952660] assign_interrupt_mode Found MSI capability [ 15.952797] Allocate Port Service[0000:00:1c.2:pcie00] [ 15.952862] Allocate Port Service[0000:00:1c.2:pcie02] [ 15.953138] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 15.953315] assign_interrupt_mode Found MSI capability [ 15.953453] Allocate Port Service[0000:00:1c.3:pcie00] [ 15.953538] Allocate Port Service[0000:00:1c.3:pcie02] [ 15.953816] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 15.953993] assign_interrupt_mode Found MSI capability [ 15.954132] Allocate Port Service[0000:00:1c.4:pcie00] [ 15.954196] Allocate Port Service[0000:00:1c.4:pcie02] [ 16.006564] Real Time Clock Driver v1.12ac [ 16.006738] hpet_resources: 0xfed00000 is busy [ 16.006815] Linux agpgart interface v0.102 [ 16.006819] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.009009] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.009132] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 16.009315] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 16.019047] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.019055] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 16.029331] mice: PS/2 mouse device common for all mice [ 16.029409] cpuidle: using governor ladder [ 16.029413] cpuidle: using governor menu [ 16.029675] NET: Registered protocol family 1 [ 16.029768] registered taskstats version 1 [ 16.030008] Magic number: 4:368:83 [ 16.030126] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 16.030131] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 16.030135] EDD information not available. [ 16.030147] Freeing unused kernel memory: 316k freed [ 16.036117] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 17.414698] fuse init (API version 7.9) [ 17.450988] ACPI: SSDT BF6E1B32, 0306 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 17.451649] ACPI: SSDT BF6E1EBD, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 17.458068] Monitor-Mwait will be used to enter C-1 state [ 17.458074] Monitor-Mwait will be used to enter C-2 state [ 17.458078] Monitor-Mwait will be used to enter C-3 state [ 17.458325] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 17.458335] ACPI: Processor [CPU0] (supports 8 throttling states) [ 17.458901] ACPI: SSDT BF6E1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 17.459543] ACPI: SSDT BF6E1E38, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 17.463814] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 17.463825] ACPI: Processor [CPU1] (supports 8 throttling states) [ 17.467952] ACPI: Thermal Zone [THM0] (52 C) [ 17.471267] ACPI: Thermal Zone [THM1] (47 C) [ 17.907384] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 17.907391] Copyright (c) 1999-2006 Intel Corporation. [ 17.907504] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 17.907533] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 17.943111] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1e:37:8e:54:fc [ 18.052450] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 18.070128] usbcore: registered new interface driver usbfs [ 18.070167] usbcore: registered new interface driver hub [ 18.070222] usbcore: registered new device driver usb [ 18.071861] USB Universal Host Controller Interface driver v3.0 [ 18.071944] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 18.071967] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 18.071975] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 18.072388] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 18.072449] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 18.072699] usb usb1: configuration #1 chosen from 1 choice [ 18.072743] hub 1-0:1.0: USB hub found [ 18.072754] hub 1-0:1.0: 2 ports detected [ 18.173603] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 18.173630] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 18.173639] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 18.173682] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 18.173744] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 18.173966] usb usb2: configuration #1 chosen from 1 choice [ 18.174009] hub 2-0:1.0: USB hub found [ 18.174021] hub 2-0:1.0: 2 ports detected [ 18.278641] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.278666] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 18.278675] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 18.278720] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 18.278784] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 18.278991] usb usb3: configuration #1 chosen from 1 choice [ 18.279034] hub 3-0:1.0: USB hub found [ 18.279046] hub 3-0:1.0: 2 ports detected [ 18.290167] SCSI subsystem initialized [ 18.327942] libata version 3.00 loaded. [ 18.381199] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 18.381226] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 18.381235] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 18.381280] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 18.381344] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 18.381547] usb usb4: configuration #1 chosen from 1 choice [ 18.381590] hub 4-0:1.0: USB hub found [ 18.381602] hub 4-0:1.0: 2 ports detected [ 18.485072] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 18.485097] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 18.485106] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 18.485151] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 18.485208] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 18.485424] usb usb5: configuration #1 chosen from 1 choice [ 18.485468] hub 5-0:1.0: USB hub found [ 18.485480] hub 5-0:1.0: 2 ports detected [ 18.590290] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 18.592423] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 18.592436] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 18.592516] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 18.596474] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 18.596496] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 18.612611] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.612797] usb usb6: configuration #1 chosen from 1 choice [ 18.612843] hub 6-0:1.0: USB hub found [ 18.612855] hub 6-0:1.0: 4 ports detected [ 18.718227] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 18.720356] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 18.720368] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 18.720486] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 18.724456] ehci_hcd 0000:00:1d.7: debug port 1 [ 18.724474] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 18.724493] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 18.740422] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.740614] usb usb7: configuration #1 chosen from 1 choice [ 18.740662] hub 7-0:1.0: USB hub found [ 18.740674] hub 7-0:1.0: 6 ports detected [ 18.844558] ahci 0000:00:1f.2: version 3.0 [ 18.844627] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 18.846829] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports [ 18.846837] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7 [ 19.389354] Clocksource tsc unstable (delta = -414358376 ns) [ 19.393437] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 impl SATA mode [ 19.393447] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 19.393461] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 19.394331] scsi0 : ahci [ 19.394948] scsi1 : ahci [ 19.395044] scsi2 : ahci [ 19.395157] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 506 [ 19.395166] ata2: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226180 irq 506 [ 19.395174] ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 506 [ 19.484895] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.485542] ata1.00: ATA-8: HITACHI HTS722010K9SA00, DC2ZC75A, max UDMA/133 [ 19.485551] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 19.486454] ata1.00: configured for UDMA/133 [ 19.564493] ata2: SATA link down (SStatus 0 SControl 0) [ 19.617049] ata3: SATA link down (SStatus 0 SControl 0) [ 19.617280] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72201 DC2Z PQ: 0 ANSI: 5 [ 19.617381] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 19.617402] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 19.669692] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 19.675464] Driver 'sd' needs updating - please use bus_type methods [ 19.675602] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 19.675625] sd 0:0:0:0: [sda] Write Protect is off [ 19.675630] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.675663] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.675742] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 19.675761] sd 0:0:0:0: [sda] Write Protect is off [ 19.675766] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.675799] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.675806] sda:<7>ata_piix 0000:00:1f.1: version 2.12 [ 19.676448] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 19.676537] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 19.676906] scsi3 : ata_piix [ 19.677012] scsi4 : ata_piix [ 19.678742] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 [ 19.678748] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 [ 19.687672] sda1 sda2 sda3 < sda5 sda6 > [ 19.693315] sd 0:0:0:0: [sda] Attached SCSI disk [ 19.701425] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 19.839520] ata4.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-M10N, 1.02, max UDMA/33 [ 19.905647] Attempting manual resume [ 19.905653] swsusp: Resume From Partition 8:6 [ 19.905656] PM: Checking swsusp image. [ 19.905908] PM: Resume from disk failed. [ 19.935240] ata4.00: configured for UDMA/33 [ 19.935429] ata5: port disabled. ignoring. [ 19.936096] kjournald starting. Commit interval 5 seconds [ 19.936115] EXT3-fs: mounted filesystem with ordered data mode. [ 19.938587] scsi 3:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-M10N 1.02 PQ: 0 ANSI: 5 [ 19.938734] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 19.960564] Driver 'sr' needs updating - please use bus_type methods [ 19.978260] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 19.978267] Uniform CD-ROM driver Revision: 3.20 [ 19.978355] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 20.252828] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a2034c9] [ 24.823934] agpgart: Detected an Intel 965GM Chipset. [ 24.828103] agpgart: Detected 7676K stolen memory. [ 24.849213] agpgart: AGP aperture is 256M @ 0xe0000000 [ 24.913947] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 24.951027] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 25.039485] iTCO_vendor_support: vendor-support=0 [ 25.072081] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 25.072293] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) [ 25.072387] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 25.612647] input: Power Button (FF) as /devices/virtual/input/input2 [ 25.639949] ACPI: Power Button (FF) [PWRF] [ 25.640165] input: Lid Switch as /devices/virtual/input/input3 [ 25.640921] ACPI: Lid Switch [LID] [ 25.641075] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 25.668932] ACPI: Sleep Button (CM) [SLPB] [ 26.022739] ACPI: WMI-Acer: Mapper loaded [ 26.391756] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] [ 26.517585] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 26.520532] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 [ 26.520540] Socket status: 30000006 [ 26.520546] pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff [ 26.520551] pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff [ 26.520555] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 26.543354] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 26.546902] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6 [ 26.587294] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 26.725341] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.725354] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 26.727551] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 26.833020] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0 [ 26.833027] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 26.908084] ACPI: AC Adapter [AC] (off-line) [ 27.144731] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 27.144776] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 27.146925] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 27.448407] ACPI: Battery Slot [BAT0] (battery present) [ 27.761330] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 28.160385] Non-volatile memory driver v1.2 [ 28.630018] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 28.630029] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 28.673800] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 28.763143] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 28.763149] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 28.763153] thinkpad_acpi: ThinkPad BIOS 7LETB2WW (2.12 ), EC 7KHT24WW-1.08 [ 28.763157] thinkpad_acpi: Lenovo ThinkPad T61 [ 28.764658] thinkpad_acpi: radio switch found; radios are enabled [ 28.774769] thinkpad_acpi: standard ACPI backlight interface available, not loading native one... [ 28.775285] input: ThinkPad Extra Buttons as /devices/virtual/input/input9 [ 30.370690] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 30.389205] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 31.674811] lp: driver loaded but no devices found [ 31.932700] Adding 1179320k swap on /dev/sda6. Priority:-1 extents:1 across:1179320k [ 31.982641] EXT3 FS on sda5, internal journal [ 32.688096] ip_tables: (C) 2000-2006 Netfilter Core Team [ 33.845927] ACPI: ACPI Dock Station Driver [ 33.854078] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 33.854092] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 33.854478] ACPI: Error installing bay notify handler [ 33.854486] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 34.295215] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 34.474905] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10 [ 34.952929] ppdev: user-space parallel port driver [ 35.008721] audit(1208462762.266:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5105 profile="/usr/sbin/cupsd" namespace="default" [ 37.731795] [drm] Initialized drm 1.1.0 20060810 [ 37.734725] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.734735] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 37.734799] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 37.755599] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 41.620855] NET: Registered protocol family 10 [ 41.621283] lo: Disabled Privacy Extensions [ 41.623309] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 41.624792] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 50.413609] CPU0 attaching NULL sched-domain. [ 50.413619] CPU1 attaching NULL sched-domain. [ 50.437501] CPU0 attaching sched-domain: [ 50.437513] domain 0: span 03 [ 50.437516] groups: 01 02 [ 50.437522] domain 1: span 03 [ 50.437525] groups: 03 [ 50.437529] domain 2: span 03 [ 50.437532] groups: 03 [ 50.437536] CPU1 attaching sched-domain: [ 50.437539] domain 0: span 03 [ 50.437542] groups: 02 01 [ 50.437547] domain 1: span 03 [ 50.437550] groups: 03 [ 50.437554] domain 2: span 03 [ 50.437557] groups: 03 [ 56.103963] NET: Registered protocol family 17 [ 57.674403] wlan0: Initial auth_alg=0 [ 57.674415] wlan0: authenticate with AP 00:0f:8f:98:51:81 [ 57.677330] wlan0: Initial auth_alg=0 [ 57.677340] wlan0: authenticate with AP 00:0f:8f:98:51:81 [ 57.677370] wlan0: RX authentication from 00:0f:8f:98:51:81 (alg=0 transaction=2 status=0) [ 57.677375] wlan0: authenticated [ 57.677380] wlan0: associate with AP 00:0f:8f:98:51:81 [ 57.677398] wlan0: authentication frame received from 00:0f:8f:98:51:81, but not in authenticate state - ignored [ 57.678718] wlan0: authentication frame received from 00:0f:8f:98:51:81, but not in authenticate state - ignored [ 57.680853] wlan0: RX AssocResp from 00:0f:8f:98:51:81 (capab=0x421 status=0 aid=2) [ 57.680861] wlan0: associated [ 57.680868] wlan0: CTS protection enabled (BSSID=00:0f:8f:98:51:81) [ 57.692557] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 60.968683] wlan0: no IPv6 routers present [ 60.975725] wlan0: CTS protection disabled (BSSID=00:0f:8f:98:51:81) [ 65.256906] wlan0: deauthenticate(reason=3) [ 65.434901] ACPI: PCI interrupt for device 0000:00:19.0 disabled [ 67.610915] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 69.872091] Syncing filesystems ... done. [ 69.872242] PM: Preparing system for mem sleep [ 69.872455] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 69.872952] Freezing remaining freezable tasks ... (elapsed 0.10 seconds) done. [ 69.974064] PM: Entering mem sleep [ 69.974065] Suspending console(s) [ 69.974067] drm_sysfs_suspend [ 69.974427] ACPI: PCI interrupt for device 0000:00:02.0 disabled [ 69.991472] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 69.991605] sd 0:0:0:0: [sda] Stopping disk [ 70.001597] ACPI handle has no context! [ 70.019165] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 70.019349] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 70.020673] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 70.020726] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 70.020778] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 70.035913] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 70.036187] ACPI: PCI interrupt for device 0000:00:1a.7 disabled [ 70.037444] ACPI: PCI interrupt for device 0000:00:1a.1 disabled [ 70.037499] ACPI: PCI interrupt for device 0000:00:1a.0 disabled [ 70.042705] Disabling non-boot CPUs ... [ 70.042726] CPU0 attaching NULL sched-domain. [ 70.042727] CPU1 attaching NULL sched-domain. [ 70.155848] CPU 1 is now offline [ 70.155851] SMP alternatives: switching to UP code [ 70.157023] CPU0 attaching sched-domain: [ 70.157025] domain 0: span 01 [ 70.157026] groups: 01 [ 70.157166] CPU1 is down [ 70.157314] Extended CMOS year: 2000 [ 0.580017] Back to C! [ 0.580368] Extended CMOS year: 2000 [ 0.580535] Enabling non-boot CPUs ... [ 0.580629] CPU0 attaching NULL sched-domain. [ 0.590942] SMP alternatives: switching to SMP code [ 0.591835] Booting processor 1/2 APIC 0x1 [ 0.602784] Initializing CPU#1 [ 0.683895] Calibrating delay using timer specific routine.. 4859.89 BogoMIPS (lpj=9719799) [ 0.683901] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.683902] CPU: L2 cache: 3072K [ 0.683904] CPU 1/1 -> Node 0 [ 0.683905] CPU: Physical Processor ID: 0 [ 0.683906] CPU: Processor Core ID: 1 [ 0.684337] Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.683854] CPU0 attaching sched-domain: [ 0.683856] domain 0: span 03 [ 0.683857] groups: 01 02 [ 0.683859] domain 1: span 03 [ 0.683860] groups: 03 [ 0.683861] domain 2: span 03 [ 0.683862] groups: 03 [ 0.683863] CPU1 attaching sched-domain: [ 0.683864] domain 0: span 03 [ 0.683865] groups: 02 01 [ 0.683866] domain 1: span 03 [ 0.683867] groups: 03 [ 0.683868] domain 2: span 03 [ 0.683869] groups: 03 [ 0.684831] CPU1 is up [ 0.688355] Switched to high resolution mode on CPU 1 [ 1.182445] ACPI: EC: missing write data confirmation, don't expect it any longer. [ 1.201179] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) [ 1.213443] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) [ 1.213482] PM: Writing back config space on device 0000:00:19.0 at offset 1 (was 100107, writing 100103) [ 1.213510] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 1.213519] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 1.213577] usb usb1: root hub lost power or was reset [ 1.213600] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 1.213607] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 1.213660] usb usb2: root hub lost power or was reset [ 1.226498] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 1.226506] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 1.242343] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [ 1.242370] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 1.242378] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 1.242422] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20002020, writing 2020) [ 1.242435] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) [ 1.242474] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.242509] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) [ 1.242551] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.242577] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20004040, writing 4040) [ 1.242590] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) [ 1.242629] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.242656] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20005050, writing 5050) [ 1.242668] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) [ 1.242710] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 1.242734] PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20006060, writing 6060) [ 1.242746] PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) [ 1.242785] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 1.242797] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.242804] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1.242864] usb usb3: root hub lost power or was reset [ 1.242887] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 1.242893] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1.242947] usb usb4: root hub lost power or was reset [ 1.242969] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.242978] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1.243031] usb usb5: root hub lost power or was reset [ 1.258405] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 1.258412] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.258512] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) [ 1.258535] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1.258639] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 1.258645] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 1.258733] ata5: port disabled. ignoring. [ 1.259360] ata4.01: _GTF evaluation failed (AE 0x1001) [ 1.274281] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) [ 1.274334] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.577543] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 1.577545] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 1.577971] ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [ 1.578326] ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [ 1.912809] ata4.00: configured for UDMA/33 [ 2.276644] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 40100102) [ 2.292474] PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) [ 2.292481] PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) [ 2.292490] PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) [ 2.346256] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.587335] ata3: SATA link down (SStatus 0 SControl 0) [ 2.587353] ata2: SATA link down (SStatus 0 SControl 0) [ 2.751032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.763406] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 2.763408] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.763684] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 2.763951] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded [ 2.766677] ata1.00: configured for UDMA/133 [ 2.766943] ata1: failed to recover some devices, retrying in 5 secs [ 3.192415] thinkpad_acpi: unknown LID-related HKEY event: 0x5010 [ 3.328289] sd 0:0:0:0: [sda] Starting disk [ 5.169433] ata1: soft resetting link [ 5.169444] ata1: SATA link down (SStatus 611 SControl 300) [ 5.169454] ata1: failed to recover some devices, retrying in 5 secs [ 6.618408] ata1: hard resetting link [ 8.215560] ata1: port is slow to respond, please be patient (Status 0x80) [ 9.530006] ata1: COMRESET failed (errno=-16) [ 9.530012] ata1: hard resetting link [ 9.667778] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.668922] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 9.668926] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 9.669132] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 9.669238] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded [ 9.670947] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 9.670951] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 9.671170] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 9.671392] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded [ 9.671793] ata1.00: configured for UDMA/133 [ 9.673308] ata1.00: configured for UDMA/133 [ 9.673309] ata1: EH complete [ 9.673336] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 9.673344] sd 0:0:0:0: [sda] Write Protect is off [ 9.673345] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.673356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.673366] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 9.673372] sd 0:0:0:0: [sda] Write Protect is off [ 9.673373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.673383] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.926910] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 9.928322] PM: Finishing wakeup. [ 9.928323] Restarting tasks ... done. [ 10.170511] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0 [ 10.170516] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 10.170649] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 10.170684] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 10.171734] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 10.243833] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 10.243839] Copyright (c) 1999-2006 Intel Corporation. [ 10.244543] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 10.244560] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 10.272630] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1e:37:8e:54:fc [ 10.365888] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 10.377906] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.423212] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 10.529737] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 10.546153] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.593659] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.435211] wlan0: Initial auth_alg=0 [ 14.435224] wlan0: authenticate with AP 00:0f:8f:98:51:81 [ 14.437696] wlan0: Initial auth_alg=0 [ 14.437706] wlan0: authenticate with AP 00:0f:8f:98:51:81 [ 14.439181] wlan0: RX authentication from 00:0f:8f:98:51:81 (alg=0 transaction=2 status=0) [ 14.439188] wlan0: authenticated [ 14.439192] wlan0: associate with AP 00:0f:8f:98:51:81 [ 14.441337] wlan0: RX AssocResp from 00:0f:8f:98:51:81 (capab=0x421 status=0 aid=2) [ 14.441343] wlan0: associated [ 14.452977] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 17.756694] wlan0: no IPv6 routers present