[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003e0d5000 (usable) [ 0.000000] BIOS-e820: 000000003e0d5000 - 000000003e2d6000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003e2d6000 - 000000003eebf000 (ACPI data) [ 0.000000] BIOS-e820: 000000003eebf000 - 000000003eeef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 96MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 254165) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 254165 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 254165 [ 0.000000] On node 0 totalpages: 254165 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 193 pages used for memmap [ 0.000000] HighMem zone: 24596 pages, LIFO batch:7 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FE020 checksum 0 [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 3EEFD120, 0074 (r1 APPLE Apple00 55 1000013) [ 0.000000] ACPI: FACP 3EEFB000, 00F4 (r3 APPLE Apple00 55 Loki 5F) [ 0.000000] ACPI: DSDT 3EEF1000, 389A (r1 APPLE Macmini 10001 INTL 20050309) [ 0.000000] ACPI: FACS 3EEC1000, 0040 [ 0.000000] ACPI: HPET 3EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 3EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: MCFG 3EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ASF! 3EEF7000, 009C (r32 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SBST 3EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ECDT 3EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 3EEBD000, 064F (r1 APPLE SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 3EEBC000, 069C (r1 APPLE SataSec 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 3EEF0000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 252180 [ 0.000000] Kernel command line: root=UUID=fc63868b-deb6-4151-8d2d-c88930df8c9c ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1833.455 MHz processor. [ 20.921429] Console: colour VGA+ 80x25 [ 20.921655] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 20.921984] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 20.949197] Memory: 995788k/1016660k available (2015k kernel code, 20152k reserved, 915k data, 364k init, 99156k highmem) [ 20.949206] virtual kernel memory layout: [ 20.949207] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 20.949208] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 20.949210] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 20.949211] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 20.949212] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 20.949213] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB) [ 20.949215] .text : 0xc0100000 - 0xc02f7e86 (2015 kB) [ 20.949218] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 20.949255] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 20.949391] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 20.949396] hpet0: 3 64-bit timers, 14318180 Hz [ 21.030334] Calibrating delay using timer specific routine.. 3670.62 BogoMIPS (lpj=7341252) [ 21.030354] Security Framework v1.0.0 initialized [ 21.030360] SELinux: Disabled at boot. [ 21.030375] Mount-cache hash table entries: 512 [ 21.030501] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 21.030509] monitor/mwait feature present. [ 21.030511] using mwait in idle threads. [ 21.030515] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.030517] CPU: L2 cache: 2048K [ 21.030519] CPU: Physical Processor ID: 0 [ 21.030521] CPU: Processor Core ID: 0 [ 21.030523] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002140 0000c1a9 00000000 00000000 [ 21.030532] Compat vDSO mapped to ffffe000. [ 21.030543] Checking 'hlt' instruction... OK. [ 21.046416] SMP alternatives: switching to UP code [ 21.046806] Early unpacking initramfs... done [ 21.384605] ACPI: Core revision 20070126 [ 21.384660] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.439342] CPU0: Intel Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08 [ 21.439360] SMP alternatives: switching to SMP code [ 21.439468] Booting processor 1/1 eip 3000 [ 21.449657] Initializing CPU#1 [ 21.529828] Calibrating delay using timer specific routine.. 3666.65 BogoMIPS (lpj=7333300) [ 21.529834] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 21.529839] monitor/mwait feature present. [ 21.529843] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.529845] CPU: L2 cache: 2048K [ 21.529847] CPU: Physical Processor ID: 0 [ 21.529849] CPU: Processor Core ID: 1 [ 21.529850] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002140 0000c1a9 00000000 00000000 [ 21.530357] CPU1: Intel Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08 [ 21.530381] Total of 2 processors activated (7337.27 BogoMIPS). [ 21.530577] ENABLING IO-APIC IRQs [ 21.530783] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 21.677773] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 21.697773] Brought up 2 CPUs [ 21.734615] migration_cost=49 [ 21.734749] Booting paravirtualized kernel on bare hardware [ 21.734839] Time: 7:22:32 Date: 03/21/108 [ 21.734865] NET: Registered protocol family 16 [ 21.734949] EISA bus registered [ 21.734954] ACPI: bus type pci registered [ 21.735123] PCI: Using configuration type 1 [ 21.735125] Setting up standard PCI resources [ 21.736562] ACPI: EC: Found ECDT [ 21.737452] ACPI: System BIOS is requesting _OSI(Linux) [ 21.737455] ACPI: Please test with "acpi_osi=!Linux" [ 21.737456] Please send dmidecode to linux-acpi@vger.kernel.org [ 21.740610] ACPI: Interpreter enabled [ 21.740612] ACPI: (supports S0 S3 S4 S5) [ 21.740628] ACPI: Using IOAPIC for interrupt routing [ 21.745117] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 21.745169] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.745183] PCI: Probing PCI hardware (bus 00) [ 21.745854] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 21.745859] PCI quirk: region 0500-053f claimed by ICH6 GPIO [ 21.746555] PCI: Transparent bridge - 0000:00:1e.0 [ 21.746613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.746902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 21.747010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 21.747127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 21.752804] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 21.752885] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 21.752971] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 21.753050] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 21.753129] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 21.753208] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 21.753287] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 21.753366] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 21.753465] Linux Plug and Play Support v0.97 (c) Adam Belay [ 21.753473] pnp: PnP ACPI init [ 21.753480] ACPI: bus type pnp registered [ 21.754795] pnp: PnP ACPI: found 10 devices [ 21.754797] ACPI: ACPI bus type pnp unregistered [ 21.754801] PnPBIOS: Disabled by ACPI PNP [ 21.754842] PCI: Using ACPI for IRQ routing [ 21.754844] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 21.754932] NET: Registered protocol family 8 [ 21.754934] NET: Registered protocol family 20 [ 21.754983] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 21.754987] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 21.754990] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 21.754993] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 21.755000] pnp: 00:06: iomem range 0xfed00000-0xfed003ff has been reserved [ 21.757607] Time: tsc clocksource has been installed. [ 21.757624] Switched to high resolution mode on CPU 0 [ 21.757707] Switched to high resolution mode on CPU 1 [ 21.785274] PCI: Bridge: 0000:00:1c.0 [ 21.785278] IO window: 1000-1fff [ 21.785284] MEM window: 90200000-902fffff [ 21.785289] PREFETCH window: 50000000-500fffff [ 21.785295] PCI: Bridge: 0000:00:1c.1 [ 21.785296] IO window: disabled. [ 21.785302] MEM window: 90100000-901fffff [ 21.785306] PREFETCH window: disabled. [ 21.785312] PCI: Bridge: 0000:00:1e.0 [ 21.785314] IO window: disabled. [ 21.785319] MEM window: 90000000-900fffff [ 21.785324] PREFETCH window: disabled. [ 21.785352] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 21.785359] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 21.785382] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 21.785388] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 21.785402] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 21.785412] NET: Registered protocol family 2 [ 21.833528] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 21.833587] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 21.835198] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 21.835842] TCP: Hash tables configured (established 131072 bind 65536) [ 21.835844] TCP reno registered [ 21.849635] checking if image is initramfs... it is [ 22.511533] Freeing initrd memory: 7465k freed [ 22.512144] audit: initializing netlink socket (disabled) [ 22.512158] audit(1208762552.136:1): initialized [ 22.512253] highmem bounce pool size: 64 pages [ 22.514275] VFS: Disk quotas dquot_6.5.1 [ 22.514325] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 22.514424] io scheduler noop registered [ 22.514426] io scheduler anticipatory registered [ 22.514428] io scheduler deadline registered [ 22.514442] io scheduler cfq registered (default) [ 22.514457] Boot video device is 0000:00:02.0 [ 22.514719] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.514775] assign_interrupt_mode Found MSI capability [ 22.514778] Allocate Port Service[0000:00:1c.0:pcie00] [ 22.514817] Allocate Port Service[0000:00:1c.0:pcie02] [ 22.514911] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 22.514967] assign_interrupt_mode Found MSI capability [ 22.514970] Allocate Port Service[0000:00:1c.1:pcie00] [ 22.515000] Allocate Port Service[0000:00:1c.1:pcie02] [ 22.515159] isapnp: Scanning for PnP cards... [ 22.868613] isapnp: No Plug & Play device found [ 22.891193] Real Time Clock Driver v1.12ac [ 22.891410] hpet_resources: 0xfed00000 is busy [ 22.891434] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.892520] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.892644] input: Macintosh mouse button emulation as /class/input/input0 [ 22.892766] PNP: No PS/2 controller found. Probing ports directly. [ 22.893626] i8042.c: No controller found. [ 22.893757] mice: PS/2 mouse device common for all mice [ 22.893849] EISA: Probing bus 0 at eisa.0 [ 22.893857] Cannot allocate resource for EISA slot 1 [ 22.893860] Cannot allocate resource for EISA slot 2 [ 22.893887] EISA: Detected 0 cards. [ 22.893977] TCP cubic registered [ 22.893992] NET: Registered protocol family 1 [ 22.894014] Using IPI No-Shortcut mode [ 22.894168] Magic number: 4:129:370 [ 22.894472] Freeing unused kernel memory: 364k freed [ 24.085632] AppArmor: AppArmor initialized<5>audit(1208762553.636:2): type=1505 info="AppArmor initialized" pid=1227 [ 24.092642] fuse init (API version 7.8) [ 24.099235] Failure registering capabilities with primary security module. [ 24.136251] ACPI: SSDT 3EEBAC90, 022A (r1 APPLE Cpu0Ist 3000 INTL 20050309) [ 24.136429] ACPI: SSDT 3EEB9E10, 01BA (r1 APPLE Cpu0Cst 3001 INTL 20050309) [ 24.136644] Monitor-Mwait will be used to enter C-1 state [ 24.136648] Monitor-Mwait will be used to enter C-2 state [ 24.136652] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 24.136656] ACPI: Processor [CPU0] (supports 8 throttling states) [ 24.136883] ACPI: SSDT 3EEBAF10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) [ 24.137048] ACPI: SSDT 3EEB8F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) [ 24.137286] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 24.137290] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.024000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.028000] Time: hpet clocksource has been installed. [ 3.488000] usbcore: registered new interface driver usbfs [ 3.488000] usbcore: registered new interface driver hub [ 3.488000] usbcore: registered new device driver usb [ 3.492000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18 [ 3.492000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.492000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.492000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.492000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.492000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.492000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0x90445400 [ 3.496000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.496000] usb usb1: configuration #1 chosen from 1 choice [ 3.496000] hub 1-0:1.0: USB hub found [ 3.496000] hub 1-0:1.0: 8 ports detected [ 3.500000] SCSI subsystem initialized [ 3.504000] libata version 2.21 loaded. [ 3.512000] USB Universal Host Controller Interface driver v3.0 [ 3.600000] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 3.652000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 3.660000] ata_piix 0000:00:1f.1: version 2.11 [ 3.660000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20 [ 3.660000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 3.660000] scsi0 : ata_piix [ 3.660000] scsi1 : ata_piix [ 3.660000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000120c0 irq 14 [ 3.660000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000120c8 irq 15 [ 3.848000] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 3.980000] ata1.00: ATAPI: MATSHITADVD-R UJ-85J, FEW7, max UDMA/66 [ 3.980000] usb 1-1: configuration #1 chosen from 1 choice [ 3.980000] hub 1-1:1.0: USB hub found [ 3.980000] hub 1-1:1.0: 7 ports detected [ 4.152000] ata1.00: configured for UDMA/66 [ 4.320000] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-85J FEW7 PQ: 0 ANSI: 5 [ 4.320000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] [ 4.320000] ata_piix 0000:00:1f.2: invalid MAP value 0 [ 4.476000] PCI: Enabling device 0000:00:1f.2 (0005 -> 0007) [ 4.476000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 4.476000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.476000] scsi2 : ata_piix [ 4.476000] scsi3 : ata_piix [ 4.476000] ata3: SATA max UDMA/133 cmd 0x000120d8 ctl 0x000120fe bmdma 0x00012020 irq 19 [ 4.476000] ata4: SATA max UDMA/133 cmd 0x000120d0 ctl 0x000120fa bmdma 0x00012028 irq 19 [ 4.664000] ata3.01: ATA-7: ST98823AS, 7.01, max UDMA/133 [ 4.664000] ata3.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.680000] ata3.01: configured for UDMA/133 [ 4.844000] scsi 2:0:1:0: Direct-Access ATA ST98823AS 7.01 PQ: 0 ANSI: 5 [ 4.844000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18 [ 4.844000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4.844000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.844000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.844000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x000020a0 [ 4.844000] usb usb2: configuration #1 chosen from 1 choice [ 4.848000] hub 2-0:1.0: USB hub found [ 4.848000] hub 2-0:1.0: 2 ports detected [ 4.940000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2e08de] [ 4.952000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 4.952000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4.952000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.952000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 4.952000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002080 [ 4.952000] usb usb3: configuration #1 chosen from 1 choice [ 4.952000] hub 3-0:1.0: USB hub found [ 4.952000] hub 3-0:1.0: 2 ports detected [ 5.056000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 5.056000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 5.056000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.056000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.056000] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00002060 [ 5.056000] usb usb4: configuration #1 chosen from 1 choice [ 5.056000] hub 4-0:1.0: USB hub found [ 5.056000] hub 4-0:1.0: 2 ports detected [ 5.160000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 5.160000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 5.160000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.160000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.160000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00002040 [ 5.160000] usb usb5: configuration #1 chosen from 1 choice [ 5.160000] hub 5-0:1.0: USB hub found [ 5.160000] hub 5-0:1.0: 2 ports detected [ 5.300000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.300000] Uniform CD-ROM driver Revision: 3.20 [ 5.300000] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 5.300000] sd 2:0:1:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.300000] sd 2:0:1:0: [sda] Write Protect is off [ 5.300000] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 5.300000] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.300000] sd 2:0:1:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.300000] sd 2:0:1:0: [sda] Write Protect is off [ 5.300000] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 5.300000] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.300000] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 5.304000] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 5.336000] usb 1-1.7: new full speed USB device using ehci_hcd and address 7 [ 5.372000] sda1 sda2 sda3 [ 5.392000] sd 2:0:1:0: [sda] Attached SCSI disk [ 5.428000] usb 1-1.7: configuration #1 chosen from 1 choice [ 5.576000] Attempting manual resume [ 5.576000] swsusp: Resume From Partition 8:2 [ 5.576000] PM: Checking swsusp image. [ 5.576000] PM: Resume from disk failed. [ 5.628000] kjournald starting. Commit interval 5 seconds [ 5.628000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.800000] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 5.960000] usb 4-1: configuration #1 chosen from 1 choice [ 6.204000] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 6.360000] usb 4-2: configuration #1 chosen from 1 choice [ 6.360000] hub 4-2:1.0: USB hub found [ 6.364000] hub 4-2:1.0: 3 ports detected [ 6.716000] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 6.900000] usb 5-1: configuration #1 chosen from 1 choice [ 7.144000] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 7.328000] usb 5-2: configuration #1 chosen from 1 choice [ 7.552000] usb 4-2.1: new full speed USB device using uhci_hcd and address 4 [ 7.708000] usb 4-2.1: configuration #1 chosen from 1 choice [ 7.716000] hub 4-2.1:1.0: USB hub found [ 7.716000] hub 4-2.1:1.0: 3 ports detected [ 8.044000] usb 4-2.2: new low speed USB device using uhci_hcd and address 5 [ 8.184000] usb 4-2.2: configuration #1 chosen from 1 choice [ 8.404000] usb 4-2.1.1: new full speed USB device using uhci_hcd and address 6 [ 8.552000] usb 4-2.1.1: configuration #1 chosen from 1 choice [ 8.764000] usb 4-2.1.3: new low speed USB device using uhci_hcd and address 7 [ 8.900000] usb 4-2.1.3: configuration #1 chosen from 1 choice [ 11.460000] usb 4-2: USB disconnect, address 3 [ 11.460000] usb 4-2.1: USB disconnect, address 4 [ 11.460000] usb 4-2.1.1: USB disconnect, address 6 [ 11.460000] usb 4-2.1.3: USB disconnect, address 7 [ 11.460000] usb 4-2.2: USB disconnect, address 5 [ 12.204000] usb 4-2: new low speed USB device using uhci_hcd and address 8 [ 12.380000] usb 4-2: configuration #1 chosen from 1 choice [ 16.116000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.120000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.248000] iTCO_vendor_support: vendor-support=0 [ 16.248000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 16.248000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) [ 16.248000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 16.408000] Linux agpgart interface v0.102 (c) Dave Jones [ 16.416000] agpgart: Detected an Intel 945GM Chipset. [ 16.416000] agpgart: Detected 16124K stolen memory. [ 16.432000] agpgart: AGP aperture is 256M @ 0x80000000 [ 16.440000] ath_hal: module license 'Proprietary' taints kernel. [ 16.440000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 16.540000] wlan: 0.8.4.2 (0.9.3.2) [ 16.564000] ath_pci: 0.9.4.5 (0.9.3.2) [ 16.564000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 16.564000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 17.120000] ath_rate_sample: 1.2 (0.9.3.2) [ 17.120000] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 17.120000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 17.120000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 17.120000] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 17.120000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 17.120000] wifi0: mac 10.3 phy 6.1 radio 10.2 [ 17.120000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 17.120000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 17.120000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 17.120000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 17.120000] wifi0: Use hw queue 8 for CAB traffic [ 17.120000] wifi0: Use hw queue 9 for beacons [ 17.136000] tpm_inf_pnp 00:03: Found TPM with ID IFX0101 [ 17.152000] intel_rng: FWH not detected [ 17.228000] wifi0: Atheros 5424/2424: mem=0x90100000, irq=16 [ 17.228000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 17.228000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 17.228000] sky2 0000:01:00.0: v1.18 addr 0x90200000 irq 17 Yukon-EC (0xb6) rev 2 [ 17.232000] sky2 eth0: addr 00:16:cb:a8:bc:43 [ 17.236000] usbcore: registered new interface driver hiddev [ 17.240000] input: C-Media USB Headphone Set as /class/input/input1 [ 17.240000] input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.2-1 [ 17.260000] input: HID 05ac:1000 as /class/input/input2 [ 17.260000] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 17.280000] input: HID 05ac:1000 as /class/input/input3 [ 17.280000] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 17.292000] input: Belkin Corporation Flip KVM as /class/input/input4 [ 17.292000] input: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1d.2-2 [ 17.304000] input: Belkin Corporation Flip KVM as /class/input/input5 [ 17.304000] input: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1d.2-2 [ 17.304000] usbcore: registered new interface driver usbhid [ 17.304000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 17.312000] Linux video capture interface: v2.00 [ 17.332000] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.07 [ 17.332000] usb 1-1.7: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x041E:0x401F) [ 17.392000] usb 1-1.7: No supported image sensor detected [ 17.392000] usbcore: registered new interface driver zc0301 [ 17.396000] usbcore: registered new interface driver xpad [ 17.396000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 17.600000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX) [ 17.768000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 17.768000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 17.932000] hda_codec: STAC922x, Apple subsys_id=106b0800 [ 18.084000] usbcore: registered new interface driver snd-usb-audio [ 18.084000] usbcore: registered new interface driver gspca [ 18.084000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered [ 18.084000] input: Apple Mac mini infrared remote control driver as /class/input/input6 [ 18.084000] usbcore: registered new interface driver appleir [ 18.084000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver [ 18.440000] lp: driver loaded but no devices found [ 18.524000] Adding 3903784k swap on /dev/sda2. Priority:-1 extents:1 across:3903784k [ 19.080000] EXT3 FS on sda1, internal journal [ 19.804000] kjournald starting. Commit interval 5 seconds [ 19.804000] EXT3 FS on sda3, internal journal [ 19.804000] EXT3-fs: mounted filesystem with ordered data mode. [ 20.260000] audit(1208762570.745:3): type=1505 operation="profile_load" info="failed to unpack profile" name="/usr/lib/cups/backend/cups-pdf" pid=4283 [ 20.380000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.772000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 20.780000] No dock devices found. [ 20.792000] input: Power Button (FF) as /class/input/input7 [ 20.792000] ACPI: Power Button (FF) [PWRF] [ 20.792000] input: Power Button (CM) as /class/input/input8 [ 20.792000] ACPI: Power Button (CM) [PWRB] [ 24.784000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28 [ 25.032000] sky2 eth0: enabling interface [ 25.400000] NET: Registered protocol family 10 [ 25.400000] lo: Disabled Privacy Extensions [ 25.400000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.532000] Failure registering capabilities with primary security module. [ 25.720000] ppdev: user-space parallel port driver [ 26.028000] apm: BIOS not found. [ 26.520000] Bridge firewalling registered [ 26.536000] vnet0: starting userspace STP failed, staring kernel STP [ 26.720000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 26.720000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 26.748000] Netfilter messages via NETLINK v0.30. [ 26.756000] nf_conntrack version 0.5.0 (7942 buckets, 63536 max) [ 31.084000] Bluetooth: Core ver 2.11 [ 31.084000] NET: Registered protocol family 31 [ 31.084000] Bluetooth: HCI device and connection manager initialized [ 31.084000] Bluetooth: HCI socket layer initialized [ 31.116000] Bluetooth: L2CAP ver 2.8 [ 31.116000] Bluetooth: L2CAP socket layer initialized [ 31.144000] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 31.172000] usb 5-1: USB disconnect, address 2 [ 31.220000] Bluetooth: RFCOMM socket layer initialized [ 31.220000] Bluetooth: RFCOMM TTY layer initialized [ 31.220000] Bluetooth: RFCOMM ver 1.8 [ 31.992000] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 32.188000] usb 5-1: configuration #1 chosen from 1 choice [ 32.292000] Bluetooth: HCI USB driver ver 2.9 [ 32.296000] usbcore: registered new interface driver hci_usb [ 33.856000] [drm] Initialized drm 1.1.0 20060810 [ 33.900000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 33.900000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 35.380000] NET: Registered protocol family 17 [ 36.376000] ath0: no IPv6 routers present [ 36.528000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28 [ 37.004000] vnet0: no IPv6 routers present [ 51.128000] eth0: no IPv6 routers present [ 172.944000] usb 4-2: USB disconnect, address 8 [ 173.184000] usb 4-2: new full speed USB device using uhci_hcd and address 9 [ 173.340000] usb 4-2: configuration #1 chosen from 1 choice [ 173.340000] hub 4-2:1.0: USB hub found [ 173.344000] hub 4-2:1.0: 3 ports detected [ 173.668000] usb 4-2.1: new full speed USB device using uhci_hcd and address 10 [ 173.824000] usb 4-2.1: configuration #1 chosen from 1 choice [ 173.828000] hub 4-2.1:1.0: USB hub found [ 173.832000] hub 4-2.1:1.0: 3 ports detected [ 174.160000] usb 4-2.2: new low speed USB device using uhci_hcd and address 11 [ 174.300000] usb 4-2.2: configuration #1 chosen from 1 choice [ 174.328000] input: Belkin Corporation Flip KVM as /class/input/input9 [ 174.332000] input: USB HID v1.10 Device [Belkin Corporation Flip KVM] on usb-0000:00:1d.2-2.2 [ 174.548000] usb 4-2.1.1: new full speed USB device using uhci_hcd and address 12 [ 174.696000] usb 4-2.1.1: configuration #1 chosen from 1 choice [ 174.704000] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /class/input/input10 [ 174.704000] input: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1d.2-2.1.1 [ 174.712000] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /class/input/input11 [ 174.712000] input: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1d.2-2.1.1 [ 174.924000] usb 4-2.1.3: new low speed USB device using uhci_hcd and address 13 [ 175.060000] usb 4-2.1.3: configuration #1 chosen from 1 choice [ 175.080000] input: Logitech USB Receiver as /class/input/input12 [ 175.080000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2.1.3