[ 0.000000] Linux version 2.6.24-15-generic (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Apr 7 16:37:53 UTC 2008 (Ubuntu 2.6.24-15.27-generic) [ 0.000000] Command line: root=UUID=7d1ce646-e932-4cee-bf6d-baa7de149c24 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FAE70 checksum 0 [ 0.000000] ACPI: RSDP 000FAE70, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7FF90000, 0038 (r1 MSTEST TESTONLY 3000810 MSFT 97) [ 0.000000] ACPI: FACP 7FF90200, 0084 (r2 MSTEST OEMFACP 3000810 MSFT 97) [ 0.000000] ACPI: DSDT 7FF905C0, 9174 (r1 A0667 A0667000 0 INTL 20060113) [ 0.000000] ACPI: FACS 7FF9E000, 0040 [ 0.000000] ACPI: APIC 7FF90390, 006C (r1 MSTEST OEMAPIC 3000810 MSFT 97) [ 0.000000] ACPI: MCFG 7FF90400, 003C (r1 MSTEST OEMMCFG 3000810 MSFT 97) [ 0.000000] ACPI: OEMB 7FF9E040, 007B (r1 MSTEST AMI_OEM 3000810 MSFT 97) [ 0.000000] ACPI: HPET 7FF99740, 0038 (r1 MSTEST OEMHPET 3000810 MSFT 97) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ff90000 [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff90000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 158 [ 0.000000] 0: 256 -> 524176 [ 0.000000] On node 0 totalpages: 524078 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1211 pages reserved [ 0.000000] DMA zone: 2731 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7110 pages used for memmap [ 0.000000] DMA32 zone: 512970 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515701 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=7d1ce646-e932-4cee-bf6d-baa7de149c24 ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 33.674331] time.c: Detected 2400.000 MHz processor. [ 33.675275] Console: colour VGA+ 80x25 [ 33.675278] console [tty0] enabled [ 33.677531] Checking aperture... [ 33.677570] Calgary: detecting Calgary via BIOS EBDA area [ 33.677572] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 33.693372] Memory: 2054588k/2096704k available (2468k kernel code, 41724k reserved, 1308k data, 316k init) [ 33.693444] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 33.772168] Calibrating delay using timer specific routine.. 4803.27 BogoMIPS (lpj=9606546) [ 33.772262] Security Framework initialized [ 33.772301] SELinux: Disabled at boot. [ 33.772345] AppArmor: AppArmor initialized [ 33.772381] Failure registering capabilities with primary security module. [ 33.772594] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 33.773533] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 33.773982] Mount-cache hash table entries: 256 [ 33.774122] CPU: L1 I cache: 32K, L1 D cache: 32K [ 33.774183] CPU: L2 cache: 4096K [ 33.774218] CPU 0/0 -> Node 0 [ 33.774252] using mwait in idle threads. [ 33.774287] CPU: Physical Processor ID: 0 [ 33.774322] CPU: Processor Core ID: 0 [ 33.774360] CPU0: Thermal monitoring enabled (TM2) [ 33.774406] SMP alternatives: switching to UP code [ 33.775072] Early unpacking initramfs... done [ 34.073485] ACPI: Core revision 20070126 [ 34.073561] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 34.187019] Using local APIC timer interrupts. [ 34.228662] APIC timer calibration result 16666654 [ 34.228663] Detected 16.666 MHz APIC timer. [ 34.228758] SMP alternatives: switching to SMP code [ 34.229348] Booting processor 1/2 APIC 0x1 [ 34.239718] Initializing CPU#1 [ 34.316562] Calibrating delay using timer specific routine.. 4800.02 BogoMIPS (lpj=9600052) [ 34.316567] CPU: L1 I cache: 32K, L1 D cache: 32K [ 34.316568] CPU: L2 cache: 4096K [ 34.316570] CPU 1/1 -> Node 0 [ 34.316571] CPU: Physical Processor ID: 0 [ 34.316572] CPU: Processor Core ID: 1 [ 34.316577] CPU1: Thermal monitoring enabled (TM2) [ 34.316993] Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 34.317066] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 34.337429] Brought up 2 CPUs [ 34.337525] CPU0 attaching sched-domain: [ 34.337527] domain 0: span 03 [ 34.337528] groups: 01 02 [ 34.337530] domain 1: span 03 [ 34.337532] groups: 03 [ 34.337533] CPU1 attaching sched-domain: [ 34.337534] domain 0: span 03 [ 34.337535] groups: 02 01 [ 34.337537] domain 1: span 03 [ 34.337538] groups: 03 [ 34.337706] net_namespace: 120 bytes [ 34.338036] Time: 22:15:54 Date: 04/10/08 [ 34.338108] NET: Registered protocol family 16 [ 34.338288] ACPI: bus type pci registered [ 34.338379] PCI: Using configuration type 1 [ 34.341033] ACPI: EC: Look up EC in DSDT [ 34.347235] ACPI: Interpreter enabled [ 34.347272] ACPI: (supports S0 S1 S3 S4 S5) [ 34.347436] ACPI: Using IOAPIC for interrupt routing [ 34.353984] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 34.354570] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 34.354609] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 34.355504] PCI: Transparent bridge - 0000:00:1e.0 [ 34.355565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 34.355699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 34.355774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 34.355884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 34.355961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 34.356037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 34.367803] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 34.368228] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 34.368677] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 34.369100] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 34.369523] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 34.370001] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 34.370423] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 34.370847] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 34.371270] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 01, should be 00 [20070126] [ 34.371368] Linux Plug and Play Support v0.97 (c) Adam Belay [ 34.371425] pnp: PnP ACPI init [ 34.371463] ACPI: bus type pnp registered [ 34.373618] pnp: PnP ACPI: found 13 devices [ 34.373654] ACPI: ACPI bus type pnp unregistered [ 34.373865] PCI: Using ACPI for IRQ routing [ 34.373901] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 34.384590] NET: Registered protocol family 8 [ 34.384628] NET: Registered protocol family 20 [ 34.384701] PCI-GART: No AMD northbridge found. [ 34.384742] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 34.384888] hpet0: 3 64-bit timers, 14318180 Hz [ 34.385945] AppArmor: AppArmor Filesystem Enabled [ 34.388561] Time: tsc clocksource has been installed. [ 34.388607] Switched to high resolution mode on CPU 0 [ 34.389474] Switched to high resolution mode on CPU 1 [ 34.396573] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 34.396621] system 00:07: ioport range 0x290-0x297 has been reserved [ 34.396664] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 34.396704] system 00:08: ioport range 0x800-0x87f has been reserved [ 34.396745] system 00:08: ioport range 0x480-0x4bf has been reserved [ 34.396795] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved [ 34.396840] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved [ 34.396885] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 34.396924] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 34.396962] system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved [ 34.397007] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved [ 34.397048] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 34.397086] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [ 34.397133] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 34.397174] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 34.397211] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 34.397249] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 34.397287] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved [ 34.397332] system 00:0c: iomem range 0x0-0x0 could not be reserved [ 34.397670] PCI: Bridge: 0000:00:01.0 [ 34.397706] IO window: 9000-9fff [ 34.397742] MEM window: f4700000-f87fffff [ 34.397777] PREFETCH window: bfe00000-dfdfffff [ 34.397814] PCI: Bridge: 0000:00:1c.0 [ 34.397848] IO window: disabled. [ 34.397884] MEM window: disabled. [ 34.397920] PREFETCH window: dfe00000-dfefffff [ 34.397958] PCI: Bridge: 0000:00:1c.4 [ 34.397993] IO window: b000-bfff [ 34.398029] MEM window: f8900000-f89fffff [ 34.398066] PREFETCH window: disabled. [ 34.398103] PCI: Bridge: 0000:00:1c.5 [ 34.398138] IO window: a000-afff [ 34.398174] MEM window: f8800000-f88fffff [ 34.398210] PREFETCH window: disabled. [ 34.398248] PCI: Bridge: 0000:00:1e.0 [ 34.398283] IO window: c000-cfff [ 34.398815] MEM window: f8a00000-feafffff [ 34.398851] PREFETCH window: disabled. [ 34.398896] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.398966] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 34.398979] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.399049] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 34.399062] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.399132] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 34.399145] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 34.399216] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 34.399223] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 34.399230] NET: Registered protocol family 2 [ 34.432589] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 34.433170] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 34.434384] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 34.434837] TCP: Hash tables configured (established 262144 bind 65536) [ 34.434875] TCP reno registered [ 34.444629] checking if image is initramfs... it is [ 35.033154] Freeing initrd memory: 7936k freed [ 35.036321] audit: initializing netlink socket (disabled) [ 35.036374] audit(1207865754.248:1): initialized [ 35.038048] VFS: Disk quotas dquot_6.5.1 [ 35.038133] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 35.038257] io scheduler noop registered [ 35.038292] io scheduler anticipatory registered [ 35.038328] io scheduler deadline registered [ 35.038439] io scheduler cfq registered (default) [ 35.133624] Boot video device is 0000:01:00.0 [ 35.133750] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 35.133774] assign_interrupt_mode Found MSI capability [ 35.133831] Allocate Port Service[0000:00:01.0:pcie00] [ 35.133888] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 35.133919] assign_interrupt_mode Found MSI capability [ 35.133978] Allocate Port Service[0000:00:1c.0:pcie00] [ 35.134003] Allocate Port Service[0000:00:1c.0:pcie02] [ 35.134067] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 35.134097] assign_interrupt_mode Found MSI capability [ 35.134157] Allocate Port Service[0000:00:1c.4:pcie00] [ 35.134182] Allocate Port Service[0000:00:1c.4:pcie02] [ 35.134243] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 35.134274] assign_interrupt_mode Found MSI capability [ 35.134333] Allocate Port Service[0000:00:1c.5:pcie00] [ 35.134359] Allocate Port Service[0000:00:1c.5:pcie02] [ 35.152963] Real Time Clock Driver v1.12ac [ 35.153136] hpet_resources: 0xfed00000 is busy [ 35.153166] Linux agpgart interface v0.102 [ 35.153202] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 35.153348] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.153777] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.154345] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 35.154437] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 35.154582] PNP: No PS/2 controller found. Probing ports directly. [ 35.157293] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 35.157331] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 35.167487] mice: PS/2 mouse device common for all mice [ 35.167570] cpuidle: using governor ladder [ 35.167606] cpuidle: using governor menu [ 35.167740] NET: Registered protocol family 1 [ 35.167811] registered taskstats version 1 [ 35.167941] Magic number: 4:791:299 [ 35.168023] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 35.168069] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 35.168106] EDD information not available. [ 35.168144] Freeing unused kernel memory: 316k freed [ 35.290393] fuse init (API version 7.9) [ 35.301637] ACPI: SSDT 7FF9E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) [ 35.302041] ACPI: SSDT 7FF9E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) [ 35.302331] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 35.302432] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 35.373009] usbcore: registered new interface driver usbfs [ 35.373064] usbcore: registered new interface driver hub [ 35.373391] usbcore: registered new device driver usb [ 35.373979] USB Universal Host Controller Interface driver v3.0 [ 35.374048] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 35.374124] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 35.374126] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 35.374318] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 35.374385] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 [ 35.374504] usb usb1: configuration #1 chosen from 1 choice [ 35.374555] hub 1-0:1.0: USB hub found [ 35.374592] hub 1-0:1.0: 2 ports detected [ 35.474881] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 35.474959] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 35.474962] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 35.475013] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 35.475079] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 [ 35.475191] usb usb2: configuration #1 chosen from 1 choice [ 35.475241] hub 2-0:1.0: USB hub found [ 35.475279] hub 2-0:1.0: 2 ports detected [ 35.494522] SCSI subsystem initialized [ 35.505588] libata version 3.00 loaded. [ 35.578737] ahci 0000:00:1f.2: version 3.0 [ 35.578765] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 36.581046] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 36.581100] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part [ 36.581150] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 36.581434] scsi0 : ahci [ 36.581506] scsi1 : ahci [ 36.581569] scsi2 : ahci [ 36.581630] scsi3 : ahci [ 36.581696] scsi4 : ahci [ 36.581755] scsi5 : ahci [ 36.581863] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 507 [ 36.581910] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 507 [ 36.581955] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 507 [ 36.582001] ata4: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa80 irq 507 [ 36.582047] ata5: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb00 irq 507 [ 36.582092] ata6: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb80 irq 507 [ 37.056266] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 37.092222] ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 37.092263] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 37.150444] ata1.00: configured for UDMA/133 [ 37.459621] ata2: SATA link down (SStatus 0 SControl 300) [ 37.934834] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 37.976801] ata3.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 [ 37.976842] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 38.035023] ata3.00: configured for UDMA/133 [ 38.346162] ata4: SATA link down (SStatus 0 SControl 300) [ 38.657657] ata5: SATA link down (SStatus 0 SControl 300) [ 38.973145] ata6: SATA link down (SStatus 0 SControl 300) [ 38.973280] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 38.973435] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 38.973542] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.974387] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 38.975163] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 38.975168] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 38.975244] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 38.979199] ehci_hcd 0000:00:1a.7: debug port 1 [ 38.979238] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 38.979245] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 [ 38.993609] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 38.993750] usb usb3: configuration #1 chosen from 1 choice [ 38.993812] hub 3-0:1.0: USB hub found [ 38.993853] hub 3-0:1.0: 4 ports detected [ 39.975544] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 39.975595] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 39.975639] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 39.975733] scsi6 : ahci [ 39.975944] scsi7 : ahci [ 39.976022] ata7: SATA max UDMA/133 abar m8192@0xf89fe000 port 0xf89fe100 irq 16 [ 39.976068] ata8: SATA max UDMA/133 abar m8192@0xf89fe000 port 0xf89fe180 irq 16 [ 40.295011] ata7: SATA link down (SStatus 0 SControl 300) [ 40.614494] ata8: SATA link down (SStatus 0 SControl 300) [ 40.614588] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 40.615528] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 40.615533] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 40.615611] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 40.619568] ehci_hcd 0000:00:1d.7: debug port 1 [ 40.619607] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 40.619615] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 [ 40.623556] Driver 'sd' needs updating - please use bus_type methods [ 40.623652] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 40.623699] sd 0:0:0:0: [sda] Write Protect is off [ 40.623735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 40.623748] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.623827] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 40.623872] sd 0:0:0:0: [sda] Write Protect is off [ 40.623909] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 40.623921] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.623969] sda:<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 40.635095] usb usb4: configuration #1 chosen from 1 choice [ 40.635655] hub 4-0:1.0: USB hub found [ 40.635694] hub 4-0:1.0: 6 ports detected [ 40.641654] sda1 sda2 sda3 sda4 [ 40.662165] sd 0:0:0:0: [sda] Attached SCSI disk [ 40.662245] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 40.662294] sd 2:0:0:0: [sdb] Write Protect is off [ 40.662342] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 40.662354] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.662427] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 40.662472] sd 2:0:0:0: [sdb] Write Protect is off [ 40.662508] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 40.662521] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.662569] sdb: sdb1 sdb2 sdb3 sdb4 [ 40.678081] sd 2:0:0:0: [sdb] Attached SCSI disk [ 40.680715] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 40.680765] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 40.739011] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 40.739049] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 40.739071] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 40.739074] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 40.739091] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 40.739118] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 [ 40.739195] usb usb5: configuration #1 chosen from 1 choice [ 40.739211] hub 5-0:1.0: USB hub found [ 40.739215] hub 5-0:1.0: 2 ports detected [ 40.789398] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 40.842189] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 40.842273] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 40.842276] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 40.842338] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 40.842416] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 [ 40.842556] usb usb6: configuration #1 chosen from 1 choice [ 40.842608] hub 6-0:1.0: USB hub found [ 40.842646] hub 6-0:1.0: 2 ports detected [ 40.946072] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 40.946166] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 40.946170] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 40.946238] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 40.946301] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 [ 40.946412] usb usb7: configuration #1 chosen from 1 choice [ 40.946463] hub 7-0:1.0: USB hub found [ 40.946500] hub 7-0:1.0: 2 ports detected [ 40.977928] usb 4-1: new high speed USB device using ehci_hcd and address 2 [ 40.980454] Attempting manual resume [ 40.980490] swsusp: Resume From Partition 8:4 [ 40.980491] PM: Checking swsusp image. [ 40.980628] PM: Resume from disk failed. [ 41.017224] kjournald starting. Commit interval 5 seconds [ 41.017271] EXT3-fs: mounted filesystem with ordered data mode. [ 41.049893] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 41.049994] PCI: Setting latency timer of device 0000:03:00.1 to 64 [ 41.050374] scsi8 : pata_jmicron [ 41.050446] scsi9 : pata_jmicron [ 41.050996] ata9: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 17 [ 41.051035] ata10: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 17 [ 41.110123] usb 4-1: configuration #1 chosen from 1 choice [ 41.110313] hub 4-1:1.0: USB hub found [ 41.110417] hub 4-1:1.0: 4 ports detected [ 41.369782] ata9.00: ATAPI: SONY DVD RW DRU-700A, VY08, max UDMA/33 [ 41.453143] usb 4-4: new high speed USB device using ehci_hcd and address 3 [ 41.541483] ata9.00: configured for UDMA/33 [ 41.586250] usb 4-4: configuration #1 chosen from 1 choice [ 41.586571] hub 4-4:1.0: USB hub found [ 41.586925] hub 4-4:1.0: 4 ports detected [ 41.709054] scsi 8:0:0:0: CD-ROM SONY DVD RW DRU-700A VY08 PQ: 0 ANSI: 5 [ 41.709169] scsi 8:0:0:0: Attached scsi generic sg2 type 5 [ 42.064239] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000fb8d07] [ 42.160028] usb 4-1.4: new low speed USB device using ehci_hcd and address 4 [ 42.273301] usb 4-1.4: configuration #1 chosen from 1 choice [ 42.471667] usb 4-4.1: new low speed USB device using ehci_hcd and address 5 [ 42.582808] usb 4-4.1: configuration #1 chosen from 1 choice [ 42.783178] usb 4-4.4: new high speed USB device using ehci_hcd and address 6 [ 42.878844] usb 4-4.4: configuration #1 chosen from 1 choice [ 48.403652] ip_tables: (C) 2000-2006 Netfilter Core Team [ 48.434587] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 49.020930] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 49.045346] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 49.065055] input: Power Button (FF) as /devices/virtual/input/input1 [ 49.088725] ACPI: Power Button (FF) [PWRF] [ 49.088830] input: Power Button (CM) as /devices/virtual/input/input2 [ 49.120666] ACPI: Power Button (CM) [PWRB] [ 49.659678] iTCO_vendor_support: vendor-support=0 [ 49.692290] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 49.692386] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) [ 49.692461] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 49.719760] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 49.719840] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 49.720587] sky2 0000:02:00.0: v1.20 addr 0xf88fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 [ 49.721014] sky2 eth0: addr 00:18:f3:ca:65:89 [ 49.810632] nvidia: module license 'NVIDIA' taints kernel. [ 50.091564] usbcore: registered new interface driver libusual [ 50.182083] Linux video capture interface: v2.00 [ 50.259263] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.259350] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 50.259411] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 50.298842] Initializing USB Mass Storage driver... [ 50.318822] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 50.326705] scsi10 : SCSI emulation for USB Mass Storage devices [ 50.327705] usbcore: registered new interface driver usb-storage [ 50.327745] USB Mass Storage support registered. [ 50.327782] usb-storage: device found at 6 [ 50.327783] usb-storage: waiting for device to settle before scanning [ 50.374749] Driver 'sr' needs updating - please use bus_type methods [ 50.379908] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 50.380002] Uniform CD-ROM driver Revision: 3.20 [ 50.380120] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 50.492554] usbcore: registered new interface driver hiddev [ 50.495921] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb4/4-1/4-1.4/4-1.4:1.0/input/input4 [ 50.598830] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 50.598912] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 50.599003] cx88[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31,autodetected] [ 50.599050] cx88[0]: TV tuner type 64, Radio tuner type -1 [ 50.622322] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 50.638852] cx2388x alsa driver version 0.0.6 loaded [ 50.650246] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.4 [ 50.665168] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4.1/4-4.1:1.0/input/input5 [ 50.710137] input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.7-4.1 [ 50.757230] cx88[0]/0: found at 0000:05:02.0, rev: 5, irq: 23, latency: 64, mmio: 0xfb000000 [ 50.759371] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4.1/4-4.1:1.1/input/input6 [ 50.812720] tuner 0-0043: chip found @ 0x86 (cx88[0]) [ 50.812774] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 50.812812] tuner 0-0043: type set to tda9887 [ 50.815262] tuner 0-0061: chip found @ 0xc2 (cx88[0]) [ 50.815307] tuner-simple 0-0061: type set to 64 (LG TDVS-H06xF) [ 50.815345] tuner 0-0061: type set to LG TDVS-H06xF [ 50.815381] tuner-simple 0-0061: type set to 64 (LG TDVS-H06xF) [ 50.815419] tuner 0-0061: type set to LG TDVS-H06xF [ 50.833940] input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.7-4.1 [ 50.834099] usbcore: registered new interface driver usbhid [ 50.834137] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 50.856846] cx88[0]/0: registered device video0 [v4l2] [ 50.856925] cx88[0]/0: registered device vbi0 [ 50.858576] cx88[0]/2: cx2388x 8802 Driver Manager [ 50.858628] ACPI: PCI Interrupt 0000:05:02.2[A] -> GSI 23 (level, low) -> IRQ 23 [ 50.859219] cx88[0]/2: found at 0000:05:02.2, rev: 5, irq: 23, latency: 64, mmio: 0xfd000000 [ 50.859371] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 50.860154] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 50.935688] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 50.935729] cx88/2: registering cx8802 driver, type: dvb access: shared [ 50.935768] cx88[0]/2: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31] [ 50.935814] cx88[0]/2: cx2388x based DVB/ATSC card [ 51.263387] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 51.286124] sky2 eth0: enabling interface [ 51.314766] DVB: registering new adapter (cx88[0]) [ 51.314806] DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... [ 51.326788] ACPI: PCI Interrupt 0000:05:02.1[A] -> GSI 23 (level, low) -> IRQ 23 [ 51.326884] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 51.326974] Unable to handle kernel NULL pointer dereference at 0000000000000008 RIP: [ 51.327007] [] :snd:snd_device_new+0x59/0xb0 [ 51.327121] PGD 7d4ee067 PUD 7b6f9067 PMD 0 [ 51.327236] Oops: 0002 [1] SMP [ 51.327323] CPU 0 [ 51.327381] Modules linked in: dvb_pll lgdt330x cx88_dvb cx88_vp3054_i2c videobuf_dvb dvb_core rtc_isl1208 ir_kbd_i2c tuner tea5767 tda8290 tuner_simple mt20xx tea5761 snd_ice1712 snd_ice17xx_ak4xxx snd_ak4xxx_adda snd_cs8427 snd_ac97_codec snd_hda_intel snd_pcm_oss snd_mixer_oss snd_hwdep cx88_alsa snd_pcm psmouse cx8802 snd_seq_dummy cx8800 cx88xx snd_page_alloc ac97_bus serio_raw usbhid ir_common snd_seq_oss compat_ioctl32 evdev snd_i2c hid i2c_algo_bit sr_mod cdrom pcspkr usb_storage snd_mpu401_uart tveeprom videodev v4l2_common v4l1_compat pata_acpi libusual nvidia(P) snd_seq_midi videobuf_dma_sg videobuf_core btcx_risc sky2 iTCO_wdt iTCO_vendor_support snd_rawmidi snd_seq_midi_event i2c_core snd_seq snd_timer snd_seq_device snd soundcore button shpchp pci_hotplug intel_agp iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle iptable_filter ip_tables x_tables ext3 jbd mbcache sg sd_mod pata_jmicron ohci1394 ieee1394 ata_generic ahci libata scsi_mod ehci_hcd uhci_hcd usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 51.330212] Pid: 3311, comm: modprobe Tainted: P 2.6.24-15-generic #1 [ 51.330251] RIP: 0010:[] [] :snd:snd_device_new+0x59/0xb0 [ 51.330329] RSP: 0000:ffff81007d4e1b38 EFLAGS: 00010286 [ 51.330365] RAX: 0000000000000000 RBX: ffffffff88b5a350 RCX: 0000000000000000 [ 51.330404] RDX: ffff81007cb80700 RSI: 0000000000000000 RDI: ffff81007cb80740 [ 51.330442] RBP: 0000000000001003 R08: 0000000000000000 R09: ffff81007cb80700 [ 51.330480] R10: 0000000000000000 R11: ffffffff803b6d90 R12: ffff81007d692400 [ 51.330518] R13: ffffffff881e7620 R14: ffff81007d4e1bb0 R15: ffffffff88b8ae48 [ 51.330556] FS: 00007f2db5f3b6e0(0000) GS:ffffffff805b1000(0000) knlGS:0000000000000000 [ 51.330602] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 51.330638] CR2: 0000000000000008 CR3: 000000007d54a000 CR4: 00000000000006e0 [ 51.330677] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 51.330715] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 51.330753] Process modprobe (pid: 3311, threadinfo ffff81007d4e0000, task ffff81007cd22f80) [ 51.330799] Stack: ffff81007d692400 ffff81007d692400 ffff81007d4e1b98 ffffffff88b5a350 [ 51.330965] ffffffff88b8b648 ffffffff881e2128 ffff81007300f258 ffff81007bbb1e00 [ 51.331106] 0000000000000018 ffff81007bbb1e58 0000000000000001 ffffffff88b89c12 [ 51.331217] Call Trace: [ 51.331290] [] :snd_timer:snd_timer_new+0x128/0x180 [ 51.331338] [] :snd_pcm:snd_pcm_timer_init+0x52/0x1a0 [ 51.331383] [] :snd_pcm:snd_pcm_dev_register+0xfd/0x220 [ 51.331432] [] :snd:snd_device_register_all+0x2f/0x60 [ 51.331476] [] :snd:snd_card_register+0x3b/0x390 [ 51.331521] [] :cx88_alsa:cx88_audio_initdev+0x2ed/0x3d0 [ 51.331569] [] pci_device_probe+0xf8/0x170 [ 51.331612] [] driver_probe_device+0x9c/0x1b0 [ 51.331653] [] __driver_attach+0xc9/0xd0 [ 51.331692] [] __driver_attach+0x0/0xd0 [ 51.331730] [] bus_for_each_dev+0x4d/0x80 [ 51.331773] [] bus_add_driver+0xac/0x220 [ 51.331815] [] __pci_register_driver+0x69/0xb0 [ 51.331856] [] sys_init_module+0x18e/0x1a90 [ 51.331912] [] :videobuf_dma_sg:videobuf_to_dma+0x0/0x40 [ 51.331959] [] system_call+0x7e/0x83 [ 51.332003] [ 51.332036] [ 51.332037] Code: 48 89 50 08 48 89 02 48 8d 83 50 01 00 00 48 89 93 50 01 00 [ 51.332620] RIP [] :snd:snd_device_new+0x59/0xb0 [ 51.332686] RSP [ 51.332721] CR2: 0000000000000008 [ 51.332777] ---[ end trace cc839c0e5ed0dfaf ]--- [ 52.538213] NET: Registered protocol family 17 [ 52.970927] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 55.319082] usb-storage: device scan complete [ 55.319831] scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE 9321 PQ: 0 ANSI: 0 [ 55.320575] scsi 10:0:0:1: Direct-Access Generic STORAGE DEVICE 9321 PQ: 0 ANSI: 0 [ 55.321324] scsi 10:0:0:2: Direct-Access Generic STORAGE DEVICE 9321 PQ: 0 ANSI: 0 [ 55.322072] scsi 10:0:0:3: Direct-Access Generic STORAGE DEVICE 9321 PQ: 0 ANSI: 0 [ 55.327335] sd 10:0:0:0: [sdc] Attached SCSI removable disk [ 55.327399] sd 10:0:0:0: Attached scsi generic sg3 type 0 [ 55.328446] sd 10:0:0:1: [sdd] Attached SCSI removable disk [ 55.328504] sd 10:0:0:1: Attached scsi generic sg4 type 0 [ 55.329570] sd 10:0:0:2: [sde] Attached SCSI removable disk [ 55.329635] sd 10:0:0:2: Attached scsi generic sg5 type 0 [ 55.330693] sd 10:0:0:3: [sdf] Attached SCSI removable disk [ 55.330753] sd 10:0:0:3: Attached scsi generic sg6 type 0 [ 92.704518] No dock devices found. [ 94.924782] Unable to handle kernel NULL pointer dereference at 0000000000000010 RIP: [ 94.924823] [] :snd_pcm:snd_pcm_info+0x98/0x110 [ 94.924932] PGD 7d508067 PUD 37c08067 PMD 0 [ 94.925039] Oops: 0000 [2] SMP [ 94.925121] CPU 1 [ 94.925178] Modules linked in: acpi_cpufreq cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_stats freq_table cpufreq_conservative ac container sbs sbshc dock video output battery af_packet dvb_pll lgdt330x cx88_dvb cx88_vp3054_i2c videobuf_dvb dvb_core rtc_isl1208 ir_kbd_i2c tuner tea5767 tda8290 tuner_simple mt20xx tea5761 snd_ice1712 snd_ice17xx_ak4xxx snd_ak4xxx_adda snd_cs8427 snd_ac97_codec snd_hda_intel snd_pcm_oss snd_mixer_oss snd_hwdep cx88_alsa snd_pcm psmouse cx8802 snd_seq_dummy cx8800 cx88xx snd_page_alloc ac97_bus serio_raw usbhid ir_common snd_seq_oss compat_ioctl32 evdev snd_i2c hid i2c_algo_bit sr_mod cdrom pcspkr usb_storage snd_mpu401_uart tveeprom videodev v4l2_common v4l1_compat pata_acpi libusual nvidia(P) snd_seq_midi videobuf_dma_sg videobuf_core btcx_risc sky2 iTCO_wdt iTCO_vendor_support snd_rawmidi snd_seq_midi_event i2c_core snd_seq snd_timer snd_seq_device snd soundcore button shpchp pci_hotplug intel_agp iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle iptable_filter ip_tables x_tables ext3 jbd mbcache sg sd_mod pata_jmicron ohci1394 ieee1394 ata_generic ahci libata scsi_mod ehci_hcd uhci_hcd usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 94.928813] Pid: 5473, comm: hald Tainted: P D 2.6.24-15-generic #1 [ 94.928851] RIP: 0010:[] [] :snd_pcm:snd_pcm_info+0x98/0x110 [ 94.928926] RSP: 0018:ffff81007c7abda8 EFLAGS: 00010296 [ 94.928963] RAX: 0000000000000000 RBX: ffff81007b6e1000 RCX: 0000000000000000 [ 94.929001] RDX: 0000000000000020 RSI: ffff81007300f274 RDI: ffff81007ccbd4a0 [ 94.929039] RBP: ffff81007ccbd400 R08: 0000000000000000 R09: ffff81007ccbd400 [ 94.929077] R10: 0000000000000000 R11: ffffffff803112b0 R12: 0000000000000000 [ 94.929115] R13: ffff81007300f258 R14: ffff81007d04b540 R15: ffffffff805c28a8 [ 94.929154] FS: 00007f0a202fa780(0000) GS:ffff81007dc01700(0000) knlGS:0000000000000000 [ 94.929200] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 94.929237] CR2: 0000000000000010 CR3: 0000000037eb2000 CR4: 00000000000006e0 [ 94.929275] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 94.929314] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 94.929351] Process hald (pid: 5473, threadinfo ffff81007c7aa000, task ffff81007b43c7c0) [ 94.929397] Stack: ffff810073e18bd8 ffff81007ccbd400 ffff81007c4bb420 ffff81007300f258 [ 94.929562] ffff81007c4bb400 ffffffff88b803eb ffff810037f2f5a0 ffff810037f2f540 [ 94.929703] 0000000000000000 ffffffff881cc8c7 ffffffff01000000 ffff810037f2f600 [ 94.929813] Call Trace: [ 94.929886] [] :snd_pcm:snd_pcm_proc_info_read+0x3b/0x170 [ 94.929933] [] :snd:snd_info_entry_open+0x147/0x2e0 [ 94.929978] [] proc_reg_open+0x0/0xa0 [ 94.930014] [] proc_reg_open+0x5e/0xa0 [ 94.930056] [] __dentry_open+0xdb/0x200 [ 94.930098] [] do_filp_open+0x3a/0x50 [ 94.930146] [] get_unused_fd_flags+0x77/0x120 [ 94.930189] [] do_sys_open+0x5a/0xf0 [ 94.930230] [] system_call+0x7e/0x83 [ 94.930278] [ 94.930310] [ 94.930311] Code: 41 8b 44 24 10 89 85 c8 00 00 00 41 8b 44 24 10 41 2b 44 24 [ 94.930888] RIP [] :snd_pcm:snd_pcm_info+0x98/0x110 [ 94.930954] RSP [ 94.930988] CR2: 0000000000000010 [ 94.931028] ---[ end trace cc839c0e5ed0dfaf ]--- [ 95.314698] NET: Registered protocol family 10 [ 95.314930] lo: Disabled Privacy Extensions [ 105.920536] eth0: no IPv6 routers present [ 106.882616] EXT3 FS on sda2, internal journal [ 152.669906] gnome-keyring-d[6507]: segfault at 681ef0 rip 681ef0 rsp 7fffe44641c8 error 15