[ 0.000000] Linux version 2.6.24-15-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Apr 4 03:48:31 UTC 2008 (Ubuntu 2.6.24-15.26-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262080 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262080 [ 0.000000] On node 0 totalpages: 262080 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32449 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FB870 checksum 0 [ 0.000000] ACPI: RSDP 000FB870, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 3FFC0100, 0044 (r1 A M I OEMXSDT 3000601 MSFT 97) [ 0.000000] ACPI: FACP 3FFC0290, 00F4 (r3 A M I OEMFACP 3000601 MSFT 97) [ 0.000000] ACPI: DSDT 3FFC0440, 5683 (r1 A0368 A0368001 1 INTL 2002026) [ 0.000000] ACPI: FACS 3FFCE000, 0040 [ 0.000000] ACPI: APIC 3FFC0390, 0070 (r1 A M I OEMAPIC 3000601 MSFT 97) [ 0.000000] ACPI: MCFG 3FFC0400, 003C (r1 A M I OEMMCFG 3000601 MSFT 97) [ 0.000000] ACPI: OEMB 3FFCE040, 005B (r1 A M I AMI_OEM 3000601 MSFT 97) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e5000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e5000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260033 [ 0.000000] Kernel command line: root=UUID=d4e2d63f-f3c8-4786-ab31-d09e9f57fd19 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2009.166 MHz processor. [ 22.046867] spurious 8259A interrupt: IRQ7. [ 22.048326] Console: colour VGA+ 80x25 [ 22.048328] console [tty0] enabled [ 22.048595] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 22.048920] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 22.068882] Memory: 1027208k/1048320k available (2164k kernel code, 20396k reserved, 1006k data, 364k init, 130816k highmem) [ 22.068889] virtual kernel memory layout: [ 22.068890] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 22.068891] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 22.068892] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 22.068893] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 22.068894] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 22.068896] .data : 0xc031d2ad - 0xc0418dc4 (1006 kB) [ 22.068897] .text : 0xc0100000 - 0xc031d2ad (2164 kB) [ 22.068899] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 22.068928] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 22.148849] Calibrating delay using timer specific routine.. 4022.06 BogoMIPS (lpj=8044135) [ 22.148871] Security Framework initialized [ 22.148876] SELinux: Disabled at boot. [ 22.148888] AppArmor: AppArmor initialized [ 22.148891] Failure registering capabilities with primary security module. [ 22.148898] Mount-cache hash table entries: 512 [ 22.148994] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000 [ 22.149002] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.149004] CPU: L2 Cache: 512K (64 bytes/line) [ 22.149007] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000 [ 22.149015] Compat vDSO mapped to ffffe000. [ 22.149024] Checking 'hlt' instruction... OK. [ 22.165061] SMP alternatives: switching to UP code [ 22.166003] Freeing SMP alternatives: 11k freed [ 22.166099] Early unpacking initramfs... done [ 22.468012] ACPI: Core revision 20070126 [ 22.468066] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 22.470246] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00 [ 22.470264] Total of 1 processors activated (4022.06 BogoMIPS). [ 22.470559] ENABLING IO-APIC IRQs [ 22.470790] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 22.616310] Brought up 1 CPUs [ 22.616357] CPU0 attaching sched-domain: [ 22.616359] domain 0: span 01 [ 22.616360] groups: 01 [ 22.616485] net_namespace: 64 bytes [ 22.616491] Booting paravirtualized kernel on bare hardware [ 22.616912] Time: 11:47:01 Date: 04/06/08 [ 22.616949] NET: Registered protocol family 16 [ 22.617086] EISA bus registered [ 22.617115] ACPI: bus type pci registered [ 22.617725] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 22.617727] PCI: Using configuration type 1 [ 22.617729] Setting up standard PCI resources [ 22.622935] ACPI: EC: Look up EC in DSDT [ 22.627623] ACPI: Interpreter enabled [ 22.627626] ACPI: (supports S0 S1 S3 S4 S5) [ 22.627638] ACPI: Using IOAPIC for interrupt routing [ 22.635701] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.636732] PCI: Transparent bridge - 0000:00:10.0 [ 22.636748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.636941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT] [ 22.637024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT] [ 22.637111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 22.637208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 22.646569] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 22.646761] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 22.646951] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 22.647140] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *5 [ 22.647330] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11 [ 22.647519] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 22.647707] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 22.647896] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 22.648084] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 22.648276] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *5 [ 22.648465] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5 [ 22.648653] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5 [ 22.648842] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 22.649030] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 22.649223] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5 [ 22.649417] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 22.649605] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 22.649798] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 [ 22.650027] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 22.650122] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 4C, should be 3F [20070126] [ 22.650128] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.650150] pnp: PnP ACPI init [ 22.650155] ACPI: bus type pnp registered [ 22.655096] pnp: PnP ACPI: found 14 devices [ 22.655098] ACPI: ACPI bus type pnp unregistered [ 22.655101] PnPBIOS: Disabled by ACPI PNP [ 22.655260] PCI: Using ACPI for IRQ routing [ 22.655263] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.672229] NET: Registered protocol family 8 [ 22.672231] NET: Registered protocol family 20 [ 22.672281] AppArmor: AppArmor Filesystem Enabled [ 22.676203] Time: tsc clocksource has been installed. [ 22.684221] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 22.684224] system 00:07: ioport range 0x800-0x80f has been reserved [ 22.684226] system 00:07: ioport range 0x500-0x57f has been reserved [ 22.684228] system 00:07: ioport range 0x580-0x5ff has been reserved [ 22.684231] system 00:07: ioport range 0x800-0x87f could not be reserved [ 22.684234] system 00:07: ioport range 0x880-0x8ff has been reserved [ 22.684236] system 00:07: ioport range 0x900-0x97f has been reserved [ 22.684238] system 00:07: ioport range 0x980-0x9ff has been reserved [ 22.684241] system 00:07: ioport range 0x2000-0x207f has been reserved [ 22.684243] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 22.684246] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 22.684249] system 00:07: iomem range 0xfeb80000-0xfebbffff has been reserved [ 22.684252] system 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved [ 22.684256] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 22.684259] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved [ 22.684264] system 00:0b: ioport range 0x290-0x297 has been reserved [ 22.684269] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 22.684274] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 22.684276] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 22.684279] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 22.684282] system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved [ 22.684284] system 00:0d: iomem range 0xff780000-0xffffffff could not be reserved [ 22.714551] PCI: Bridge: 0000:00:02.0 [ 22.714553] IO window: disabled. [ 22.714555] MEM window: disabled. [ 22.714557] PREFETCH window: disabled. [ 22.714559] PCI: Bridge: 0000:00:03.0 [ 22.714561] IO window: disabled. [ 22.714563] MEM window: disabled. [ 22.714564] PREFETCH window: disabled. [ 22.714567] PCI: Bridge: 0000:00:04.0 [ 22.714568] IO window: b000-bfff [ 22.714571] MEM window: f8900000-fe9fffff [ 22.714573] PREFETCH window: bff00000-dfefffff [ 22.714576] PCI: Bridge: 0000:00:10.0 [ 22.714577] IO window: c000-cfff [ 22.714580] MEM window: fea00000-feafffff [ 22.714583] PREFETCH window: disabled. [ 22.714594] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.714601] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 22.714607] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 22.714614] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 22.714624] NET: Registered protocol family 2 [ 22.752166] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 22.752409] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 22.753010] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 22.753306] TCP: Hash tables configured (established 131072 bind 65536) [ 22.753308] TCP reno registered [ 22.764199] checking if image is initramfs... it is [ 23.215529] Switched to high resolution mode on CPU 0 [ 23.344186] Freeing initrd memory: 7279k freed [ 23.344626] audit: initializing netlink socket (disabled) [ 23.344635] audit(1207482422.176:1): initialized [ 23.344750] highmem bounce pool size: 64 pages [ 23.346094] VFS: Disk quotas dquot_6.5.1 [ 23.346149] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 23.346242] io scheduler noop registered [ 23.346244] io scheduler anticipatory registered [ 23.346246] io scheduler deadline registered [ 23.346254] io scheduler cfq registered (default) [ 31.348391] 0000:00:0b.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 [ 31.348505] Boot video device is 0000:03:00.0 [ 31.348585] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 31.348606] assign_interrupt_mode Found MSI capability [ 31.348623] Allocate Port Service[0000:00:02.0:pcie00] [ 31.348675] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 31.348695] assign_interrupt_mode Found MSI capability [ 31.348709] Allocate Port Service[0000:00:03.0:pcie00] [ 31.348755] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 31.348775] assign_interrupt_mode Found MSI capability [ 31.348789] Allocate Port Service[0000:00:04.0:pcie00] [ 31.348944] isapnp: Scanning for PnP cards... [ 31.702191] isapnp: No Plug & Play device found [ 31.723615] Real Time Clock Driver v1.12ac [ 31.723688] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 31.723802] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 31.724306] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 31.724836] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 31.724886] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 31.724950] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 31.724952] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 31.725346] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 31.728092] mice: PS/2 mouse device common for all mice [ 31.728175] EISA: Probing bus 0 at eisa.0 [ 31.728183] Cannot allocate resource for EISA slot 2 [ 31.728200] EISA: Detected 0 cards. [ 31.728202] cpuidle: using governor ladder [ 31.728204] cpuidle: using governor menu [ 31.728271] NET: Registered protocol family 1 [ 31.728290] Using IPI No-Shortcut mode [ 31.728315] registered taskstats version 1 [ 31.728417] Magic number: 4:837:781 [ 31.728504] hash matches device ptyq3 [ 31.728542] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 31.728544] EDD information not available. [ 31.728724] Freeing unused kernel memory: 364k freed [ 31.759841] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 32.964871] fuse init (API version 7.9) [ 32.984828] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 33.773136] usbcore: registered new interface driver usbfs [ 33.773156] usbcore: registered new interface driver hub [ 33.781142] usbcore: registered new device driver usb [ 33.799348] SCSI subsystem initialized [ 33.825063] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 33.825393] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 33.825402] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 16 [ 33.825412] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 33.825415] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 33.825615] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 33.825631] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xfebde000 [ 33.854226] libata version 3.00 loaded. [ 33.883074] usb usb1: configuration #1 chosen from 1 choice [ 33.883094] hub 1-0:1.0: USB hub found [ 33.883102] hub 1-0:1.0: 8 ports detected [ 33.985276] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 33.985286] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 17 [ 33.985296] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 33.985298] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 33.985320] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 33.985344] ehci_hcd 0000:00:0b.1: debug port 1 [ 33.985348] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 33.985358] ehci_hcd 0000:00:0b.1: irq 17, io mem 0xfebdfc00 [ 33.996799] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.996899] usb usb2: configuration #1 chosen from 1 choice [ 33.996920] hub 2-0:1.0: USB hub found [ 33.996925] hub 2-0:1.0: 8 ports detected [ 34.028649] FDC 0 is a post-1991 82077 [ 34.100803] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 34.101102] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 34.101111] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 18 [ 34.101117] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 34.512112] usb 2-4: new high speed USB device using ehci_hcd and address 2 [ 34.620335] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:b1:48:bb [ 34.620339] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 [ 34.622600] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 [ 34.622610] ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 19 [ 34.672320] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 34.674761] pata_amd 0000:00:0d.0: version 0.3.10 [ 34.674806] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 34.678179] scsi0 : pata_amd [ 34.680350] scsi1 : pata_amd [ 34.693929] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 34.693931] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 34.694883] usb 2-4: configuration #1 chosen from 1 choice [ 34.694964] hub 2-4:1.0: USB hub found [ 34.695064] hub 2-4:1.0: 4 ports detected [ 35.011696] ata1.00: ATAPI: LITE-ON DVDRW SOHW-1673S, JS01, max UDMA/66 [ 35.039366] usb 2-7: new high speed USB device using ehci_hcd and address 3 [ 35.183402] ata1.00: configured for UDMA/66 [ 35.183614] usb 2-7: configuration #1 chosen from 1 choice [ 35.351570] scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1673S JS01 PQ: 0 ANSI: 5 [ 35.353763] sata_nv 0000:00:0e.0: version 3.5 [ 35.354065] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 [ 35.354074] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20 [ 35.354106] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 35.355247] scsi2 : sata_nv [ 35.355438] scsi3 : sata_nv [ 35.355562] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 20 [ 35.355565] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 20 [ 35.383030] usb 2-4.1: new high speed USB device using ehci_hcd and address 4 [ 35.500064] usb 2-4.1: configuration #1 chosen from 1 choice [ 35.500264] hub 2-4.1:1.0: USB hub found [ 35.500400] hub 2-4.1:1.0: 3 ports detected [ 35.803090] usb 2-4.2: new low speed USB device using ehci_hcd and address 5 [ 35.822311] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 35.830542] ata3.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7 [ 35.830545] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 35.838528] ata3.00: configured for UDMA/133 [ 35.917503] usb 2-4.2: configuration #1 chosen from 1 choice [ 35.966174] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800006755de] [ 36.118668] usb 2-4.1.2: new low speed USB device using ehci_hcd and address 6 [ 36.216979] usb 2-4.1.2: configuration #1 chosen from 1 choice [ 36.218562] usbcore: registered new interface driver libusual [ 36.218636] usbcore: registered new interface driver hiddev [ 36.225148] Initializing USB Mass Storage driver... [ 36.227923] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:0b.1/usb2/2-4/2-4.2/2-4.2:1.0/input/input2 [ 36.233800] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:0b.1-4.2 [ 36.233824] scsi4 : SCSI emulation for USB Mass Storage devices [ 36.237819] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:0b.1/usb2/2-4/2-4.1/2-4.1.2/2-4.1.2:1.0/input/input3 [ 36.237836] usb-storage: device found at 3 [ 36.237837] usb-storage: waiting for device to settle before scanning [ 36.249764] input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:0b.1-4.1.2 [ 36.252413] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:0b.1/usb2/2-4/2-4.1/2-4.1.2/2-4.1.2:1.1/input/input4 [ 36.265726] input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:0b.1-4.1.2 [ 36.265740] usbcore: registered new interface driver usbhid [ 36.265743] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 36.265817] usbcore: registered new interface driver usb-storage [ 36.265820] USB Mass Storage support registered. [ 36.305656] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 36.355952] ata4.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133 [ 36.355955] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (not used) [ 36.370402] ata4.00: configured for UDMA/133 [ 36.370483] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 36.370571] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 36.370906] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23 [ 36.370909] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 16 [ 36.370943] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 36.371370] scsi5 : sata_nv [ 36.371490] scsi6 : sata_nv [ 36.371600] ata5: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16 [ 36.371602] ata6: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16 [ 36.681132] ata5: SATA link down (SStatus 0 SControl 300) [ 37.000695] ata6: SATA link down (SStatus 0 SControl 300) [ 37.022988] Driver 'sr' needs updating - please use bus_type methods [ 37.028099] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 37.028104] Uniform CD-ROM driver Revision: 3.20 [ 37.028146] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 37.036506] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 37.036522] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 37.036536] scsi 3:0:0:0: Attached scsi generic sg2 type 0 [ 37.044697] Driver 'sd' needs updating - please use bus_type methods [ 37.044763] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 37.044772] sd 2:0:0:0: [sda] Write Protect is off [ 37.044774] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 37.044786] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.044820] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 37.044827] sd 2:0:0:0: [sda] Write Protect is off [ 37.044829] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 37.044840] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.044843] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 [ 37.081192] sd 2:0:0:0: [sda] Attached SCSI disk [ 37.081882] sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 37.081892] sd 3:0:0:0: [sdb] Write Protect is off [ 37.081894] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 37.081907] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.081939] sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 37.081946] sd 3:0:0:0: [sdb] Write Protect is off [ 37.081948] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 37.081959] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.081962] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 37.141420] sd 3:0:0:0: [sdb] Attached SCSI disk [ 37.548803] Attempting manual resume [ 37.548806] swsusp: Resume From Partition 8:22 [ 37.548808] PM: Checking swsusp image. [ 37.549008] PM: Resume from disk failed. [ 37.574424] kjournald starting. Commit interval 5 seconds [ 37.574435] EXT3-fs: mounted filesystem with ordered data mode. [ 41.231375] usb-storage: device scan complete [ 41.235236] scsi 4:0:0:0: Direct-Access USB2.0 CF CardReader 9144 PQ: 0 ANSI: 0 [ 41.239225] scsi 4:0:0:1: Direct-Access USB2.0 CBO CardReader 9144 PQ: 0 ANSI: 0 [ 41.242991] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 41.243014] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 41.246979] sd 4:0:0:1: [sdd] Attached SCSI removable disk [ 41.246999] sd 4:0:0:1: Attached scsi generic sg4 type 0 [ 43.772888] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 43.867781] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 44.169928] input: Power Button (FF) as /devices/virtual/input/input5 [ 44.178921] ACPI: Power Button (FF) [PWRF] [ 44.179007] input: Power Button (CM) as /devices/virtual/input/input6 [ 44.190903] ACPI: Power Button (CM) [PWRB] [ 45.916659] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 [ 45.916683] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 [ 46.303885] Linux agpgart interface v0.102 [ 46.725989] nvidia: module license 'NVIDIA' taints kernel. [ 47.174855] Linux video capture interface: v2.00 [ 47.391706] saa7130/34: v4l2 driver version 0.2.14 loaded [ 47.392124] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 47.392133] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 21 [ 47.392141] saa7133[0]: found at 0000:04:09.0, rev: 208, irq: 21, latency: 64, mmio: 0xfeaff000 [ 47.392146] saa7133[0]: subsystem: 1043:4862, board: ASUSTeK P7131 Dual [card=78,autodetected] [ 47.392155] saa7133[0]: board init: gpio is 0 [ 47.392233] input: saa7134 IR (ASUSTeK P7131 Dual) as /devices/pci0000:00/0000:00:10.0/0000:04:09.0/input/input7 [ 47.538347] saa7133[0]: i2c eeprom 00: 43 10 62 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 47.538355] saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff [ 47.538361] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d6 ff ff ff ff [ 47.538367] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 47.538372] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff [ 47.538378] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 47.538383] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 47.538389] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 47.999340] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 48.029683] tuner 2-004b: chip found @ 0x96 (saa7133[0]) [ 48.077608] tda8290 2-004b: setting tuner address to 61 [ 48.181463] tuner 2-004b: type set to tda8290+75a [ 48.229398] tda8290 2-004b: setting tuner address to 61 [ 48.337267] tuner 2-004b: type set to tda8290+75a [ 48.405631] saa7133[0]: registered device video0 [v4l2] [ 48.405652] saa7133[0]: registered device vbi0 [ 48.405669] saa7133[0]: registered device radio0 [ 48.419312] NET: Registered protocol family 10 [ 48.419488] lo: Disabled Privacy Extensions [ 48.565290] parport_pc 00:06: reported by Plug and Play ACPI [ 48.565414] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 48.606234] saa7134 ALSA driver for DMA sound loaded [ 48.606260] saa7133[0]/alsa: saa7133[0] at 0xfeaff000 irq 21 registered as card -2 [ 48.606316] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000001 [ 48.606320] printing eip: f8b02745 *pde = 00000000 [ 48.606323] Oops: 0000 [#1] SMP [ 48.606325] Modules linked in: saa7134_alsa parport_pc parport snd_pcm snd_page_alloc snd_hwdep ipv6 evdev snd_seq_dummy pcspkr tuner tea5767 tda8290 tuner_simple mt20xx tea5761 snd_seq_oss saa7134 compat_ioctl32 videobuf_dma_sg videobuf_core ir_kbd_i2c snd_seq_midi ir_common snd_rawmidi videodev v4l2_common v4l1_compat snd_seq_midi_event nvidia(P) snd_seq k8temp snd_timer snd_seq_device snd agpgart soundcore i2c_nforce2 i2c_core button shpchp pci_hotplug ext3 jbd mbcache sd_mod sg sr_mod cdrom usb_storage usbhid hid pata_acpi libusual sata_nv pata_amd floppy ohci1394 ieee1394 ata_generic forcedeth ehci_hcd ohci_hcd libata scsi_mod usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 48.606356] [ 48.606358] Pid: 3517, comm: modprobe Tainted: P (2.6.24-15-generic #1) [ 48.606361] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 [ 48.606374] EIP is at snd_pcm_timer_init+0x25/0x170 [snd_pcm] [ 48.606376] EAX: 00000001 EBX: df8f9c00 ECX: df9e9ddc EDX: 00000000 [ 48.606378] ESI: df8f9dd4 EDI: dfb80034 EBP: 00000018 ESP: df9e9dc4 [ 48.606380] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 48.606383] Process modprobe (pid: 3517, ti=df9e8000 task=dfb890e0 task.ti=df9e8000) [ 48.606385] Stack: 00000000 00000001 f58ba000 00000000 f58ba000 00000000 00000003 00000000 [ 48.606389] df8f9c00 00000018 f8a3220c 00000000 df8f9dd4 dfb80000 f8afa67f f8b0b92c [ 48.606394] dfb80000 df9e9e18 dfb80c00 00000001 f8b035f4 436d6370 63304431 ffffff00 [ 48.606398] Call Trace: [ 48.606409] [] snd_add_device_sysfs_file+0x3c/0x70 [snd] [ 48.606423] [] snd_pcm_dev_register+0xef/0x200 [snd_pcm] [ 48.606444] [] snd_device_register_all+0x2d/0x60 [snd] [ 48.606456] [] snd_card_register+0x1e/0x320 [snd] [ 48.606475] [] alsa_device_init+0x23a/0x280 [saa7134_alsa] [ 48.606489] [] saa7134_alsa_init+0x6b/0xc0 [saa7134_alsa] [ 48.606496] [] sys_init_module+0x126/0x19c0 [ 48.606537] [] snd_pcm_format_width+0x0/0x20 [snd_pcm] [ 48.606560] [] sysenter_past_esp+0x6b/0xa9 [ 48.606578] ======================= [ 48.606579] Code: 5b c3 8d 74 26 00 56 89 c6 53 83 ec 30 8b 56 30 c7 44 24 1c 00 00 00 00 8d 4c 24 18 c7 44 24 18 03 00 00 00 8b 18 83 e2 01 8b 03 <8b> 00 89 44 24 20 8b 43 0c 89 44 24 24 8b 46 0c 01 c0 09 c2 8d [ 48.606598] EIP: [] snd_pcm_timer_init+0x25/0x170 [snd_pcm] SS:ESP 0068:df9e9dc4 [ 48.606609] ---[ end trace 5b506db0f4aa3fc9 ]--- [ 48.643279] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 17 [ 48.643290] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNEA] -> GSI 17 (level, low) -> IRQ 22 [ 48.643297] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 48.643500] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 48.708899] DVB: registering new adapter (saa7133[0]) [ 48.708904] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... [ 48.787682] tda1004x: setting up plls for 48MHz sampling clock [ 50.778024] tda1004x: found firmware revision 29 -- ok [ 58.891472] eth0: no IPv6 routers present [ 150.382612] No dock devices found. [ 150.667587] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) [ 150.667615] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 [ 150.667618] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 [ 150.667620] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 152.077875] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000001 [ 152.077991] printing eip: f8afcc7f *pde = 00000000 [ 152.078125] Oops: 0000 [#2] SMP [ 152.078257] Modules linked in: powernow_k8 cpufreq_stats cpufreq_conservative cpufreq_userspace cpufreq_powersave cpufreq_ondemand freq_table sbs sbshc video output container dock ac battery tda827x snd_pcm_oss snd_mixer_oss saa7134_dvb videobuf_dvb dvb_core tda1004x saa7134_alsa parport_pc parport snd_pcm snd_page_alloc snd_hwdep ipv6 evdev snd_seq_dummy pcspkr tuner tea5767 tda8290 tuner_simple mt20xx tea5761 snd_seq_oss saa7134 compat_ioctl32 videobuf_dma_sg videobuf_core ir_kbd_i2c snd_seq_midi ir_common snd_rawmidi videodev v4l2_common v4l1_compat snd_seq_midi_event nvidia(P) snd_seq k8temp snd_timer snd_seq_device snd agpgart soundcore i2c_nforce2 i2c_core button shpchp pci_hotplug ext3 jbd mbcache sd_mod sg sr_mod cdrom usb_storage usbhid hid pata_acpi libusual sata_nv pata_amd floppy ohci1394 ieee1394 ata_generic forcedeth ehci_hcd ohci_hcd libata scsi_mod usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 152.082393] [ 152.082444] Pid: 4818, comm: hald Tainted: P D (2.6.24-15-generic #1) [ 152.082499] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 [ 152.082563] EIP is at snd_pcm_info+0x2f/0x110 [snd_pcm] [ 152.082617] EAX: 00000001 EBX: df8f9c00 ECX: 00000040 EDX: f5824200 [ 152.082671] ESI: 00000001 EDI: f5824320 EBP: df8f9dd4 ESP: dfbcfe98 [ 152.082725] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 152.082779] Process hald (pid: 4818, ti=dfbce000 task=f6acab40 task.ti=dfbce000) [ 152.082834] Stack: f5824200 f5824200 f7fede80 df8f9dd4 dfbbe600 f8af9d34 000040d0 f605e600 [ 152.083258] f7fede80 f605e630 f605e600 00000000 f8a344a4 dfb04840 01bcff30 ffffffff [ 152.083682] f607be80 00000000 f7ba2b10 dfb04840 c01c43e6 dfb04840 f7ba2b10 00000000 [ 152.084106] Call Trace: [ 152.084212] [] snd_pcm_proc_info_read+0x34/0x180 [snd_pcm] [ 152.084326] [] snd_info_entry_open+0x114/0x280 [snd] [ 152.084440] [] proc_reg_open+0x46/0x70 [ 152.084541] [] __dentry_open+0xbf/0x1c0 [ 152.084644] [] nameidata_to_filp+0x35/0x40 [ 152.084740] [] proc_reg_open+0x0/0x70 [ 152.084835] [] do_filp_open+0x50/0x60 [ 152.084938] [] check_pgt_cache+0x1b/0x20 [ 152.085049] [] get_unused_fd_flags+0x52/0xd0 [ 152.085152] [] do_sys_open+0x4c/0xe0 [ 152.085256] [] sys_open+0x1c/0x20 [ 152.085351] [] sysenter_past_esp+0x6b/0xa9 [ 152.085473] ======================= [ 152.085524] Code: 48 00 00 00 89 7c 24 0c 89 d7 89 6c 24 10 89 c5 89 5c 24 04 89 74 24 08 89 14 24 8b 18 8b 70 04 31 c0 f3 ab 8b 03 b9 40 00 00 00 <8b> 00 89 42 0c 8b 43 0c 89 02 8b 45 30 89 42 08 8b 45 0c 89 42 [ 152.088206] EIP: [] snd_pcm_info+0x2f/0x110 [snd_pcm] SS:ESP 0068:dfbcfe98 [ 152.088396] ---[ end trace 5b506db0f4aa3fc9 ]--- [ 153.572034] lp0: using parport0 (interrupt-driven). [ 153.583351] ppdev: user-space parallel port driver [ 155.379689] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 155.379748] apm: overridden by ACPI. [ 155.630913] RPC: Registered udp transport module. [ 155.630969] RPC: Registered tcp transport module. [ 155.668300] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 155.721764] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 155.722036] NFSD: starting 90-second grace period [ 156.347502] Bluetooth: Core ver 2.11 [ 156.347716] NET: Registered protocol family 31 [ 156.347769] Bluetooth: HCI device and connection manager initialized [ 156.347824] Bluetooth: HCI socket layer initialized [ 156.373894] Bluetooth: L2CAP ver 2.9 [ 156.373950] Bluetooth: L2CAP socket layer initialized [ 156.448207] Bluetooth: RFCOMM socket layer initialized [ 156.448271] Bluetooth: RFCOMM TTY layer initialized [ 156.448324] Bluetooth: RFCOMM ver 1.8 [ 313.924597] Marking TSC unstable due to: cpufreq changes. [ 313.932365] Time: acpi_pm clocksource has been installed. [ 314.156317] Clocksource tsc unstable (delta = -115997281 ns) [ 320.593930] kjournald starting. Commit interval 5 seconds [ 320.594322] EXT3 FS on sdb5, internal journal [ 320.594417] EXT3-fs: mounted filesystem with ordered data mode.