[ 0.000000] Linux version 2.6.24-12-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff30000 (usable) [ 0.000000] BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 524080) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524080 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524080 [ 0.000000] On node 0 totalpages: 524080 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292402 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FA850 checksum 0 [ 0.000000] ACPI: RSDP 000FA850, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7FF30000, 002C (r1 A M I OEMRSDT 6000517 MSFT 97) [ 0.000000] ACPI: FACP 7FF30200, 0081 (r1 A M I OEMFACP 6000517 MSFT 97) [ 0.000000] ACPI: DSDT 7FF303E0, 3755 (r1 A0058 A0058002 2 MSFT 100000D) [ 0.000000] ACPI: FACS 7FF40000, 0040 [ 0.000000] ACPI: OEMB 7FF40040, 003F (r1 A M I OEMBIOS 6000517 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ff80000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519986 [ 0.000000] Kernel command line: root=UUID=9c60e178-a4eb-48d0-936e-2b962c7f48e3 ro quiet splash [ 0.000000] Found and enabled local APIC! [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2002.596 MHz processor. [ 136.920191] Console: colour VGA+ 80x25 [ 136.920194] console [tty0] enabled [ 136.920562] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 136.920960] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 137.002012] Memory: 2066080k/2096320k available (2164k kernel code, 29028k reserved, 1007k data, 364k init, 1178816k highmem) [ 137.002020] virtual kernel memory layout: [ 137.002021] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 137.002022] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 137.002023] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 137.002024] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 137.002026] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 137.002027] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB) [ 137.002028] .text : 0xc0100000 - 0xc031d1bd (2164 kB) [ 137.002030] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 137.002066] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 137.082043] Calibrating delay using timer specific routine.. 4010.04 BogoMIPS (lpj=8020095) [ 137.082070] Security Framework initialized [ 137.082077] SELinux: Disabled at boot. [ 137.082091] AppArmor: AppArmor initialized [ 137.082095] Failure registering capabilities with primary security module. [ 137.082103] Mount-cache hash table entries: 512 [ 137.082218] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 137.082226] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 137.082228] CPU: L2 Cache: 512K (64 bytes/line) [ 137.082231] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000 00000000 [ 137.082240] Compat vDSO mapped to ffffe000. [ 137.082251] Checking 'hlt' instruction... OK. [ 137.098325] SMP alternatives: switching to UP code [ 137.099473] Freeing SMP alternatives: 11k freed [ 137.099580] Early unpacking initramfs... done [ 137.419852] ACPI: Core revision 20070126 [ 137.419903] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 137.421158] ACPI: setting ELCR to 0200 (from 0c20) [ 137.421449] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00 [ 137.421453] SMP motherboard not detected. [ 137.525825] Brought up 1 CPUs [ 137.525842] CPU0 attaching sched-domain: [ 137.525844] domain 0: span 01 [ 137.525846] groups: 01 [ 137.525988] net_namespace: 64 bytes [ 137.525995] Booting paravirtualized kernel on bare hardware [ 137.526428] Time: 17:54:32 Date: 04/07/08 [ 137.526467] NET: Registered protocol family 16 [ 137.526609] EISA bus registered [ 137.526644] ACPI: bus type pci registered [ 137.527315] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 137.527317] PCI: Using configuration type 1 [ 137.527319] Setting up standard PCI resources [ 137.532907] ACPI: EC: Look up EC in DSDT [ 137.535575] ACPI: Interpreter enabled [ 137.535577] ACPI: (supports S0 S1 S3 S4 S5) [ 137.535589] ACPI: Using PIC for interrupt routing [ 137.540570] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 137.541066] PCI: enabled onboard AC97/MC97 devices [ 137.541304] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 137.545908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 137.545987] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) [ 137.546064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 137.546140] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 137.546215] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 137.546291] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 137.546367] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 137.546442] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 137.546525] Linux Plug and Play Support v0.97 (c) Adam Belay [ 137.546548] pnp: PnP ACPI init [ 137.546553] ACPI: bus type pnp registered [ 137.549016] pnp: PnP ACPI: found 13 devices [ 137.549018] ACPI: ACPI bus type pnp unregistered [ 137.549021] PnPBIOS: Disabled by ACPI PNP [ 137.549183] PCI: Using ACPI for IRQ routing [ 137.549185] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 137.561788] NET: Registered protocol family 8 [ 137.561789] NET: Registered protocol family 20 [ 137.561845] AppArmor: AppArmor Filesystem Enabled [ 137.565760] Time: tsc clocksource has been installed. [ 137.573784] system 00:08: ioport range 0x295-0x296 has been reserved [ 137.573787] system 00:08: ioport range 0x3e1-0x3e7 has been reserved [ 137.573789] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 137.573792] system 00:08: ioport range 0x800-0x87f has been reserved [ 137.573794] system 00:08: ioport range 0x400-0x41f has been reserved [ 137.573799] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 137.573802] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 137.573805] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 137.573810] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 137.573813] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved [ 137.573815] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 137.573818] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved [ 137.573821] system 00:0c: iomem range 0x0-0x0 could not be reserved [ 137.604111] PCI: Bridge: 0000:00:01.0 [ 137.604113] IO window: b000-bfff [ 137.604117] MEM window: fd300000-fd8fffff [ 137.604120] PREFETCH window: d5200000-f51fffff [ 137.604135] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 137.604145] NET: Registered protocol family 2 [ 137.641783] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 137.642057] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 137.642859] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 137.643258] TCP: Hash tables configured (established 131072 bind 65536) [ 137.643261] TCP reno registered [ 137.653828] checking if image is initramfs... it is [ 138.105430] Switched to high resolution mode on CPU 0 [ 138.269801] Freeing initrd memory: 7698k freed [ 138.270260] audit: initializing netlink socket (disabled) [ 138.270271] audit(1207590873.164:1): initialized [ 138.270420] highmem bounce pool size: 64 pages [ 138.271794] VFS: Disk quotas dquot_6.5.1 [ 138.271852] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 138.271956] io scheduler noop registered [ 138.271958] io scheduler anticipatory registered [ 138.271960] io scheduler deadline registered [ 138.271968] io scheduler cfq registered (default) [ 138.271976] PCI: VIA PCI bridge detected. Disabling DAC. [ 138.272040] Boot video device is 0000:01:00.0 [ 138.272241] isapnp: Scanning for PnP cards... [ 138.625863] isapnp: No Plug & Play device found [ 138.648295] Real Time Clock Driver v1.12ac [ 138.648366] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 138.648463] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 138.648567] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 138.649040] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 138.649583] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 138.650110] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 138.650163] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 138.650236] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 138.650572] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 138.650576] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 138.661049] mice: PS/2 mouse device common for all mice [ 138.661135] EISA: Probing bus 0 at eisa.0 [ 138.661142] Cannot allocate resource for EISA slot 1 [ 138.661168] EISA: Detected 0 cards. [ 138.661171] cpuidle: using governor ladder [ 138.661173] cpuidle: using governor menu [ 138.661248] NET: Registered protocol family 1 [ 138.661268] Using IPI No-Shortcut mode [ 138.661295] registered taskstats version 1 [ 138.661387] Magic number: 4:207:946 [ 138.661402] hash matches device ttya1 [ 138.661486] hash matches device tty3 [ 138.661505] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 138.661506] EDD information not available. [ 138.661763] Freeing unused kernel memory: 364k freed [ 138.688977] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 139.898540] fuse init (API version 7.9) [ 140.439952] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 140.439957] PCI: setting IRQ 10 as level-triggered [ 140.439962] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 140.439994] skge 1.13 addr 0xfdc00000 irq 10 chip Yukon-Lite rev 7 [ 140.440223] skge eth0: addr 00:11:d8:04:a8:b7 [ 140.489654] SCSI subsystem initialized [ 140.532448] libata version 3.00 loaded. [ 140.545158] usbcore: registered new interface driver usbfs [ 140.545177] usbcore: registered new interface driver hub [ 140.553952] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 140.553958] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 140.562676] usbcore: registered new device driver usb [ 140.575679] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:0f.1 [ 140.575847] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 140.575850] PCI: setting IRQ 11 as level-triggered [ 140.575855] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 140.575861] PCI: VIA VLink IRQ fixup for 0000:00:0f.1, from 255 to 11 [ 140.575884] VP_IDE: not 100% native mode: will probe irqs later [ 140.575892] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 140.575899] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [ 140.575910] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [ 140.575917] Probing IDE interface ide0... [ 140.611636] USB Universal Host Controller Interface driver v3.0 [ 141.327179] hda: WDC WD1600JB-98GVA0, ATA DISK drive [ 141.327253] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 141.328486] hda: UDMA/100 mode selected [ 141.329785] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 141.360811] Probing IDE interface ide1... [ 142.278498] hdd: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive [ 143.061938] hdc: CD-ROM 36X/AKU, ATAPI CD/DVD-ROM drive [ 143.061946] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 143.062012] hdc: UDMA/33 mode selected [ 143.062122] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 143.062279] hdd: UDMA/33 mode selected [ 143.062448] ide1 at 0x170-0x177,0x376 on irq 15 [ 143.066450] sata_via 0000:00:0f.0: version 2.3 [ 143.066468] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 143.066507] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 143.068197] scsi0 : sata_via [ 143.068790] scsi1 : sata_via [ 143.068819] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 10 [ 143.068822] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 10 [ 143.269696] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 143.469185] ata1.00: ATA-7: ST3500630AS, 3.AAD, max UDMA/133 [ 143.469188] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 143.535783] ata1.00: configured for UDMA/133 [ 143.737355] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 143.748021] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 143.748439] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 143.748450] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 143.748655] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 143.748679] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000dc00 [ 143.748795] usb usb1: configuration #1 chosen from 1 choice [ 143.748816] hub 1-0:1.0: USB hub found [ 143.748820] hub 1-0:1.0: 2 ports detected [ 143.757296] Driver 'sd' needs updating - please use bus_type methods [ 143.757392] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 143.757404] sd 0:0:0:0: [sda] Write Protect is off [ 143.757406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 143.757420] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 143.757458] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 143.757466] sd 0:0:0:0: [sda] Write Protect is off [ 143.757468] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 143.757479] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 143.757482] sda: sda1 < sda5 sda6 sda7 sda8 sda9 > [ 143.832594] sd 0:0:0:0: [sda] Attached SCSI disk [ 143.839068] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 143.849392] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 143.849405] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 143.849425] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 143.849447] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000ec00 [ 143.849545] usb usb2: configuration #1 chosen from 1 choice [ 143.849564] hub 2-0:1.0: USB hub found [ 143.849569] hub 2-0:1.0: 2 ports detected [ 143.953289] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 143.953302] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 143.953321] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 143.953342] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000c000 [ 143.953430] usb usb3: configuration #1 chosen from 1 choice [ 143.953449] hub 3-0:1.0: USB hub found [ 143.953453] hub 3-0:1.0: 2 ports detected [ 144.057216] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 144.057228] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 144.057247] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 144.057268] uhci_hcd 0000:00:10.3: irq 10, io base 0x0000c400 [ 144.057362] usb usb4: configuration #1 chosen from 1 choice [ 144.057381] hub 4-0:1.0: USB hub found [ 144.057385] hub 4-0:1.0: 2 ports detected [ 144.161514] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 144.161518] PCI: setting IRQ 5 as level-triggered [ 144.161523] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 144.161535] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 144.161561] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 144.161597] ehci_hcd 0000:00:10.4: irq 5, io mem 0xfda00000 [ 144.173074] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 144.173192] usb usb5: configuration #1 chosen from 1 choice [ 144.173213] hub 5-0:1.0: USB hub found [ 144.173219] hub 5-0:1.0: 8 ports detected [ 144.295510] hda: max request size: 512KiB [ 144.296934] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63 [ 144.304951] hda: cache flushes supported [ 144.304989] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > [ 144.444935] hdc: ATAPI 32X CD-ROM drive, 128kB Cache [ 144.444942] Uniform CD-ROM driver Revision: 3.20 [ 144.446818] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 145.177615] Attempting manual resume [ 145.177619] swsusp: Resume From Partition 3:6 [ 145.177621] PM: Checking swsusp image. [ 145.184172] PM: Resume from disk failed. [ 145.232338] kjournald starting. Commit interval 5 seconds [ 145.232348] EXT3-fs: mounted filesystem with ordered data mode. [ 145.428149] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 145.615077] usb 2-2: configuration #1 chosen from 1 choice [ 152.755006] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 152.975499] parport_pc 00:07: reported by Plug and Play ACPI [ 152.975538] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 153.023420] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 153.078761] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 153.093789] parport0: Printer, HEWLETT-PACKARD DESKJET 720C [ 153.130673] Linux agpgart interface v0.102 [ 153.184132] agpgart: Detected AGP bridge 0 [ 153.186990] agpgart: AGP aperture is 64M @ 0xf8000000 [ 153.578924] input: Power Button (FF) as /devices/virtual/input/input3 [ 153.606390] ACPI: Power Button (FF) [PWRF] [ 153.606465] input: Power Button (CM) as /devices/virtual/input/input4 [ 153.638340] ACPI: Power Button (CM) [PWRB] [ 153.638425] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 153.666320] ACPI: Sleep Button (CM) [SLPB] [ 154.177979] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 154.181917] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 154.505330] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 [ 154.696436] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000] [ 154.703161] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000] [ 154.709925] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000] [ 154.716628] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000] [ 154.790677] PCI: Enabling device 0000:00:11.6 (0000 -> 0001) [ 154.790684] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 154.790690] PCI: VIA VLink IRQ fixup for 0000:00:11.6, from 0 to 5 [ 155.297595] usbcore: registered new interface driver hiddev [ 155.297618] usbcore: registered new interface driver usbhid [ 155.297621] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 155.540934] PCI: Setting latency timer of device 0000:00:11.6 to 64 [ 156.044767] ACPI: PCI interrupt for device 0000:00:11.6 disabled [ 156.044782] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [ 157.774752] /build/buildd/linux-2.6.24/drivers/input/tablet/aiptek.c: input: Aiptek using 400 ms programming speed [ 157.774755] [ 157.774838] input: Aiptek as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/input/input7 [ 157.807319] usbcore: registered new interface driver aiptek [ 157.807323] /build/buildd/linux-2.6.24/drivers/input/tablet/aiptek.c: v2.3 (May 2, 2007): Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen [ 157.807326] /build/buildd/linux-2.6.24/drivers/input/tablet/aiptek.c: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) [ 158.823668] lp0: using parport0 (interrupt-driven). [ 158.859475] w83627hf: Found W83697HF chip at 0x290 [ 158.988052] Adding 2000052k swap on /dev/hda6. Priority:-1 extents:1 across:2000052k [ 159.646774] EXT3 FS on hda8, internal journal [ 159.818567] device-mapper: uevent: version 1.0.3 [ 159.818591] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 160.618911] kjournald starting. Commit interval 5 seconds [ 160.619281] EXT3 FS on hda9, internal journal [ 160.619285] EXT3-fs: mounted filesystem with ordered data mode. [ 162.838196] ip_tables: (C) 2000-2006 Netfilter Core Team [ 163.465445] No dock devices found. [ 163.766107] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00) [ 163.769676] powernow-k8: BIOS error - no PSB or ACPI _PSS objects [ 166.018912] apm: BIOS not found. [ 166.266106] ppdev: user-space parallel port driver [ 166.698236] [drm] Initialized drm 1.1.0 20060810 [ 166.735964] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 166.736132] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 166.760021] audit(1207583702.048:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5183 profile="/usr/sbin/cupsd" namespace="default" [ 168.394121] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 168.394784] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 168.395421] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 168.810755] [drm] Setting GART location based on new memory map [ 168.810765] [drm] Loading R200 Microcode [ 168.810831] [drm] writeback test succeeded in 1 usecs [ 169.261970] skge eth0: enabling interface [ 169.406446] Bluetooth: Core ver 2.11 [ 169.407241] NET: Registered protocol family 31 [ 169.407245] Bluetooth: HCI device and connection manager initialized [ 169.407249] Bluetooth: HCI socket layer initialized [ 169.456084] Bluetooth: L2CAP ver 2.9 [ 169.456089] Bluetooth: L2CAP socket layer initialized [ 169.515473] Bluetooth: RFCOMM socket layer initialized [ 169.516029] Bluetooth: RFCOMM TTY layer initialized [ 169.516032] Bluetooth: RFCOMM ver 1.8 [ 171.076022] skge eth0: Link is up at 100 Mbps, full duplex, flow control none [ 173.787126] NET: Registered protocol family 17 [ 176.422128] NET: Registered protocol family 10 [ 176.422316] lo: Disabled Privacy Extensions [ 187.206275] eth0: no IPv6 routers present [ 294.558323] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0). [ 294.558329] atkbd.c: Use 'setkeycodes e001 ' to make it known.