[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] Command line: root=/dev/sda8 ro splash locale=it_IT [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bfb0000 (usable) [ 0.000000] BIOS-e820: 000000007bfb0000 - 000000007bfbe000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bfbe000 - 000000007bfe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bfe0000 - 000000007bfee000 (reserved) [ 0.000000] BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 507824) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FB770 checksum 0 [ 0.000000] ACPI: RSDP 000FB770, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7BFB0000, 003C (r1 A_M_I_ OEMRSDT 9000706 MSFT 97) [ 0.000000] ACPI: FACP 7BFB0200, 0084 (r2 A_M_I_ OEMFACP 9000706 MSFT 97) [ 0.000000] ACPI: DSDT 7BFB05D0, 65A2 (r1 A0865 A0865000 0 INTL 20051117) [ 0.000000] ACPI: FACS 7BFBE000, 0040 [ 0.000000] ACPI: APIC 7BFB0390, 0080 (r1 A_M_I_ OEMAPIC 9000706 MSFT 97) [ 0.000000] ACPI: MCFG 7BFB0410, 003C (r1 A_M_I_ OEMMCFG 9000706 MSFT 97) [ 0.000000] ACPI: OEMB 7BFBE040, 0060 (r1 A_M_I_ AMI_OEM 9000706 MSFT 97) [ 0.000000] ACPI: HPET 7BFB6B80, 0038 (r1 A_M_I_ OEMHPET0 9000706 MSFT 97) [ 0.000000] ACPI: SSDT 7BFB6BC0, 028A (r1 A_M_I_ POWERNOW 1 AMD 1) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007bfb0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 507824) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007bfb0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 507824 [ 0.000000] On node 0 totalpages: 507727 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1208 pages reserved [ 0.000000] DMA zone: 2735 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6886 pages used for memmap [ 0.000000] DMA32 zone: 496842 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7c000000:82c00000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 499577 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda8 ro splash locale=it_IT [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 31.070339] Marking TSC unstable due to TSCs unsynchronized [ 31.070341] time.c: Detected 2511.420 MHz processor. [ 31.073552] Console: colour VGA+ 80x25 [ 31.073554] console [tty0] enabled [ 31.077682] Checking aperture... [ 31.077740] CPU 0: aperture @ 4000000000 size 32 MB [ 31.077799] Aperture too small (32 MB) [ 31.083622] No AGP bridge found [ 31.103167] Memory: 1990512k/2031296k available (2466k kernel code, 40396k reserved, 1309k data, 316k init) [ 31.103268] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 31.180126] Calibrating delay using timer specific routine.. 5027.54 BogoMIPS (lpj=10055090) [ 31.180267] Security Framework initialized [ 31.180329] SELinux: Disabled at boot. [ 31.180397] AppArmor: AppArmor initialized [ 31.180457] Failure registering capabilities with primary security module. [ 31.180644] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 31.181980] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 31.182643] Mount-cache hash table entries: 256 [ 31.182817] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 31.182879] CPU: L2 Cache: 512K (64 bytes/line) [ 31.182938] CPU 0/0 -> Node 0 [ 31.182995] CPU: Physical Processor ID: 0 [ 31.183052] CPU: Processor Core ID: 0 [ 31.183127] SMP alternatives: switching to UP code [ 31.183664] Early unpacking initramfs... done [ 31.426400] ACPI: Core revision 20070126 [ 31.426504] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 31.469491] Using local APIC timer interrupts. [ 31.509298] APIC timer calibration result 12557095 [ 31.509300] Detected 12.557 MHz APIC timer. [ 31.509435] SMP alternatives: switching to SMP code [ 31.509891] Booting processor 1/2 APIC 0x1 [ 31.520149] Initializing CPU#1 [ 31.597343] Calibrating delay using timer specific routine.. 5022.88 BogoMIPS (lpj=10045778) [ 31.597349] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 31.597350] CPU: L2 Cache: 512K (64 bytes/line) [ 31.597352] CPU 1/1 -> Node 0 [ 31.597354] CPU: Physical Processor ID: 0 [ 31.597355] CPU: Processor Core ID: 1 [ 31.597439] AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 01 [ 31.597405] Brought up 2 CPUs [ 31.598033] CPU0 attaching sched-domain: [ 31.598035] domain 0: span 03 [ 31.598037] groups: 01 02 [ 31.598039] domain 1: span 03 [ 31.598040] groups: 03 [ 31.598042] CPU1 attaching sched-domain: [ 31.598043] domain 0: span 03 [ 31.598044] groups: 02 01 [ 31.598046] domain 1: span 03 [ 31.598047] groups: 03 [ 31.598248] net_namespace: 120 bytes [ 31.598669] Time: 17:06:41 Date: 04/12/08 [ 31.598757] NET: Registered protocol family 16 [ 31.598977] ACPI: bus type pci registered [ 31.599094] PCI: Using configuration type 1 [ 31.602111] ACPI: EC: Look up EC in DSDT [ 31.607407] ACPI: Interpreter enabled [ 31.607466] ACPI: (supports S0 S1 S3 S4 S5) [ 31.607747] ACPI: Using IOAPIC for interrupt routing [ 31.608076] Error attaching device data [ 31.608136] Error attaching device data [ 31.608195] Error attaching device data [ 31.608254] Error attaching device data [ 31.616580] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 31.617223] PCI: Transparent bridge - 0000:00:04.0 [ 31.617441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 31.617616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 31.617719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 31.617802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 31.617889] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 31.624294] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 31.624838] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 31.625378] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 31.625957] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 31.626536] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 31.627114] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 31.627694] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 31.628272] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 31.628850] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 31.629424] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 31.629959] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5 [ 31.630495] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 31.631031] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 31.631610] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11 [ 31.632146] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 31.632681] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 31.633285] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 31.633821] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 31.634437] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 31.634938] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 1B, should be 0E [20070126] [ 31.635102] Linux Plug and Play Support v0.97 (c) Adam Belay [ 31.635185] pnp: PnP ACPI init [ 31.635248] ACPI: bus type pnp registered [ 31.640924] pnp: PnP ACPI: found 16 devices [ 31.640984] ACPI: ACPI bus type pnp unregistered [ 31.641264] PCI: Using ACPI for IRQ routing [ 31.641324] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 31.657105] NET: Registered protocol family 8 [ 31.657163] NET: Registered protocol family 20 [ 31.657288] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 31.657519] hpet0: 3 32-bit timers, 25000000 Hz [ 31.658616] AppArmor: AppArmor Filesystem Enabled [ 31.661088] Time: hpet clocksource has been installed. [ 31.661157] Switched to high resolution mode on CPU 0 [ 31.661349] Switched to high resolution mode on CPU 1 [ 31.669076] system 00:07: ioport range 0xa30-0xa37 has been reserved [ 31.669139] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 31.669201] system 00:07: ioport range 0x800-0x80f has been reserved [ 31.669262] system 00:07: ioport range 0x500-0x57f has been reserved [ 31.669323] system 00:07: ioport range 0x580-0x5ff has been reserved [ 31.669384] system 00:07: ioport range 0x800-0x87f could not be reserved [ 31.669446] system 00:07: ioport range 0x880-0x8ff has been reserved [ 31.669507] system 00:07: ioport range 0xd00-0xd7f has been reserved [ 31.669570] system 00:07: ioport range 0xd80-0xdff has been reserved [ 31.669631] system 00:07: ioport range 0x900-0x97f has been reserved [ 31.669692] system 00:07: ioport range 0x980-0x9ff has been reserved [ 31.669754] system 00:07: ioport range 0x2000-0x207f has been reserved [ 31.669815] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 31.669878] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 31.669940] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 31.670002] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved [ 31.670064] system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved [ 31.670136] system 00:07: iomem range 0xff300000-0xff3fffff has been reserved [ 31.670202] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 31.670274] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 31.670346] system 00:09: iomem range 0x7c000000-0x7fffffff has been reserved [ 31.670412] system 00:0c: ioport range 0x230-0x23f has been reserved [ 31.670473] system 00:0c: ioport range 0x290-0x29f has been reserved [ 31.674134] system 00:0c: ioport range 0xa00-0xa0f has been reserved [ 31.674195] system 00:0c: ioport range 0xa10-0xa1f has been reserved [ 31.674259] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved [ 31.674324] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 31.674386] system 00:0f: iomem range 0xc0000-0xcffff has been reserved [ 31.674447] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 31.674509] system 00:0f: iomem range 0x100000-0x7bffffff could not be reserved [ 31.674580] system 00:0f: iomem range 0xff700000-0xffffffff could not be reserved [ 31.674969] PCI: Bridge: 0000:00:04.0 [ 31.675027] IO window: e000-efff [ 31.675085] MEM window: dff00000-dfffffff [ 31.675143] PREFETCH window: disabled. [ 31.675201] PCI: Bridge: 0000:00:09.0 [ 31.675258] IO window: disabled. [ 31.675315] MEM window: disabled. [ 31.675371] PREFETCH window: disabled. [ 31.675429] PCI: Bridge: 0000:00:0b.0 [ 31.675485] IO window: disabled. [ 31.675542] MEM window: disabled. [ 31.675599] PREFETCH window: disabled. [ 31.675657] PCI: Bridge: 0000:00:0c.0 [ 31.675713] IO window: disabled. [ 31.675770] MEM window: disabled. [ 31.675827] PREFETCH window: disabled. [ 31.675891] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 31.675899] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 31.675904] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 31.675909] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 31.675918] NET: Registered protocol family 2 [ 31.717052] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 31.717789] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 31.720332] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 31.721017] TCP: Hash tables configured (established 262144 bind 65536) [ 31.721081] TCP reno registered [ 31.733074] checking if image is initramfs... it is [ 32.208790] Freeing initrd memory: 7514k freed [ 32.214244] audit: initializing netlink socket (disabled) [ 32.214316] audit(1208020002.116:1): initialized [ 32.216013] VFS: Disk quotas dquot_6.5.1 [ 32.216145] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 32.216327] io scheduler noop registered [ 32.216386] io scheduler anticipatory registered [ 32.216444] io scheduler deadline registered [ 32.216584] io scheduler cfq registered (default) [ 32.217252] Boot video device is 0000:00:0d.0 [ 32.217398] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 32.217416] assign_interrupt_mode Found MSI capability [ 32.217493] Allocate Port Service[0000:00:09.0:pcie00] [ 32.217543] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 32.217560] assign_interrupt_mode Found MSI capability [ 32.217630] Allocate Port Service[0000:00:0b.0:pcie00] [ 32.217678] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 32.217695] assign_interrupt_mode Found MSI capability [ 32.217764] Allocate Port Service[0000:00:0c.0:pcie00] [ 32.240597] Real Time Clock Driver v1.12ac [ 32.240830] hpet_resources: 0xfed00000 is busy [ 32.240861] Linux agpgart interface v0.102 [ 32.240919] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 32.241104] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.241669] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.242307] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 32.242431] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 32.242583] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 32.243165] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 32.243234] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 32.260688] mice: PS/2 mouse device common for all mice [ 32.260786] cpuidle: using governor ladder [ 32.260850] cpuidle: using governor menu [ 32.261029] NET: Registered protocol family 1 [ 32.261141] registered taskstats version 1 [ 32.261296] Magic number: 4:755:137 [ 32.261462] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 32.261535] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 32.261596] EDD information not available. [ 32.261663] Freeing unused kernel memory: 316k freed [ 32.287153] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 33.452259] fuse init (API version 7.9) [ 33.467468] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 33.467480] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 33.593950] usbcore: registered new interface driver usbfs [ 33.593971] usbcore: registered new interface driver hub [ 33.617931] usbcore: registered new device driver usb [ 33.618836] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 33.619178] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 33.619188] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 33.619343] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 33.619349] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 33.619555] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 33.619577] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdfeff000 [ 33.675468] usb usb1: configuration #1 chosen from 1 choice [ 33.675491] hub 1-0:1.0: USB hub found [ 33.675499] hub 1-0:1.0: 8 ports detected [ 33.777702] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 33.777715] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 33.777866] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 33.777873] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 33.777926] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 33.777954] ehci_hcd 0000:00:02.1: debug port 1 [ 33.777957] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 33.777968] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfefec00 [ 33.789157] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.789258] usb usb2: configuration #1 chosen from 1 choice [ 33.789279] hub 2-0:1.0: USB hub found [ 33.789285] hub 2-0:1.0: 8 ports detected [ 33.853354] SCSI subsystem initialized [ 33.859045] libata version 3.00 loaded. [ 33.886692] Floppy drive(s): fd0 is 1.44M [ 33.893155] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 33.893486] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 33.893497] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 33.893502] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 33.907618] FDC 0 is a post-1991 82077 [ 34.412377] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1d:60:c7:ac:59 [ 34.412382] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 34.412752] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 34.413070] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 [ 34.413080] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20 [ 34.413094] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 34.413099] ACPI: PCI interrupt for device 0000:00:08.0 disabled [ 34.414776] sata_nv 0000:00:08.0: version 3.5 [ 34.414785] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20 [ 34.414959] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 34.416311] scsi0 : sata_nv [ 34.416964] scsi1 : sata_nv [ 34.417130] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20 [ 34.417132] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20 [ 34.883092] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 34.931837] ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 [ 34.931842] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 35.006663] ata1.00: configured for UDMA/133 [ 35.314280] ata2: SATA link down (SStatus 0 SControl 300) [ 35.324635] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 35.327024] pata_amd 0000:00:06.0: version 0.3.10 [ 35.327065] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 35.328163] scsi2 : pata_amd [ 35.328436] scsi3 : pata_amd [ 35.329018] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 35.329021] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 35.646006] ata3.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33 [ 35.817590] ata3.00: configured for UDMA/33 [ 35.817625] ata4: port disabled. ignoring. [ 35.819472] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5 [ 35.826920] Driver 'sd' needs updating - please use bus_type methods [ 35.827708] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 35.827721] sd 0:0:0:0: [sda] Write Protect is off [ 35.827723] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.827736] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.827792] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 35.827799] sd 0:0:0:0: [sda] Write Protect is off [ 35.827801] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.827812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.827815] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 35.844515] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 35.925578] sd 0:0:0:0: [sda] Attached SCSI disk [ 35.927415] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 35.927419] Uniform CD-ROM driver Revision: 3.20 [ 35.927451] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 35.930116] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 35.930136] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 36.324270] Attempting manual resume [ 36.324274] swsusp: Resume From Partition 8:3 [ 36.324276] PM: Checking swsusp image. [ 36.324465] PM: Resume from disk failed. [ 36.354877] kjournald starting. Commit interval 5 seconds [ 36.355029] EXT3-fs: mounted filesystem with ordered data mode. [ 45.908213] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 45.953695] parport_pc 00:06: reported by Plug and Play ACPI [ 45.953723] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 46.202271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 46.242047] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 46.375127] input: Power Button (FF) as /devices/virtual/input/input3 [ 46.429627] ACPI: Power Button (FF) [PWRF] [ 46.429693] input: Power Button (CM) as /devices/virtual/input/input4 [ 46.445670] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 [ 46.445684] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 [ 46.493489] ACPI: Power Button (CM) [PWRB] [ 46.501694] nvidia: module license 'NVIDIA' taints kernel. [ 47.095359] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 23 [ 47.095366] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LMC9] -> GSI 23 (level, low) -> IRQ 23 [ 47.095373] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 47.095593] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 47.142850] Linux video capture interface: v2.00 [ 47.616397] NET: Registered protocol family 10 [ 47.616599] lo: Disabled Privacy Extensions [ 47.714644] saa7130/34: v4l2 driver version 0.2.14 loaded [ 47.715014] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 47.715025] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 47.715032] saa7130[0]: found at 0000:01:06.0, rev: 1, irq: 19, latency: 64, mmio: 0xdffffc00 [ 47.715038] saa7130[0]: subsystem: 1131:0000, board: Empire PCI TV-Radio LE [card=44,insmod option] [ 47.715049] saa7130[0]: board init: gpio is 407f [ 47.816178] saa7130[0]: Huh, no eeprom present (err=-5)? [ 47.969060] All bytes are equal. It is not a TEA5767 [ 47.969066] tuner 2-0060: chip found @ 0xc0 (saa7130[0]) [ 47.969087] tuner-simple 2-0060: type set to 23 (Philips PAL_DK (FI1256 and compatibles)) [ 47.969089] tuner 2-0060: type set to Philips PAL_DK (FI1 [ 47.969092] tuner-simple 2-0060: type set to 23 (Philips PAL_DK (FI1256 and compatibles)) [ 47.969094] tuner 2-0060: type set to Philips PAL_DK (FI1 [ 47.979374] saa7130[0]: registered device video0 [v4l2] [ 47.979395] saa7130[0]: registered device vbi0 [ 47.979411] saa7130[0]: registered device radio0 [ 48.016344] saa7134 ALSA driver for DMA sound loaded [ 48.016373] saa7130[0]/alsa: saa7130[0] at 0xdffffc00 irq 19 registered as card -2 [ 48.016432] Unable to handle kernel NULL pointer dereference at 0000000000000001 RIP: [ 48.016435] [] :snd_pcm:snd_pcm_timer_init+0x2f/0x1a0 [ 48.016451] PGD 7a33e067 PUD 6c278067 PMD 0 [ 48.016453] Oops: 0000 [1] SMP [ 48.016456] CPU 0 [ 48.016457] Modules linked in: saa7134_alsa snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_hwdep tuner tea5767 tda8290 tuner_simple mt20xx snd_seq_dummy tea5761 snd_seq_oss snd_seq_midi snd_rawmidi saa7134 ipv6 snd_seq_midi_event snd_seq compat_ioctl32 serio_raw snd_timer videobuf_dma_sg videobuf_core ir_kbd_i2c snd_seq_device ir_common psmouse videodev v4l2_common v4l1_compat snd nvidia(P) i2c_nforce2 k8temp button i2c_core soundcore shpchp pci_hotplug parport_pc parport evdev pcspkr ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_generic pata_amd floppy sata_nv pata_acpi libata scsi_mod forcedeth ehci_hcd ohci_hcd usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 48.016488] Pid: 3899, comm: modprobe Tainted: P 2.6.24-16-generic #1 [ 48.016490] RIP: 0010:[] [] :snd_pcm:snd_pcm_timer_init+0x2f/0x1a0 [ 48.016497] RSP: 0000:ffff8100790b9cd8 EFLAGS: 00010246 [ 48.016498] RAX: 0000000000000001 RBX: ffff8100788f2e58 RCX: ffff8100790b9cf0 [ 48.016500] RDX: 0000000000000000 RSI: ffffffff88b7a648 RDI: ffff8100788f2c00 [ 48.016502] RBP: ffff81007a340800 R08: 0000000000000000 R09: ffff810037831d88 [ 48.016503] R10: 0000000000000000 R11: ffffffff803b6e00 R12: 0000000000000018 [ 48.016505] R13: ffff81007a340858 R14: 0000000000000001 R15: ffffffff88b79e48 [ 48.016507] FS: 00007f5a82e476e0(0000) GS:ffffffff805b0000(0000) knlGS:0000000000000000 [ 48.016509] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 48.016510] CR2: 0000000000000001 CR3: 000000007897d000 CR4: 00000000000006e0 [ 48.016512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.016513] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 48.016515] Process modprobe (pid: 3899, threadinfo ffff8100790b8000, task ffff8100797407c0) [ 48.016517] Stack: 0000000000000003 0000000000000000 ffff81007a340800 0000000000000018 [ 48.016520] ffff8100788f2e58 ffffffff88b6f7dd ffff8100788f2800 0000000480347d32 [ 48.016523] 63304431436d6370 ffff8100794ce100 ffff8100788f2c44 ffff81003792c000 [ 48.016525] Call Trace: [ 48.016534] [] :snd_pcm:snd_pcm_dev_register+0xfd/0x220 [ 48.016551] [] :snd:snd_device_register_all+0x2f/0x60 [ 48.016558] [] :snd:snd_card_register+0x3b/0x390 [ 48.016564] [] :snd_pcm:snd_pcm_new+0xe3/0x140 [ 48.016570] [] :saa7134_alsa:alsa_device_init+0x287/0x2d0 [ 48.016576] [] :saa7134_alsa:saa7134_alsa_init+0x75/0xc0 [ 48.016582] [] sys_init_module+0x18e/0x1a90 [ 48.016598] [] :snd_pcm:snd_pcm_format_width+0x0/0x30 [ 48.016606] [] system_call+0x7e/0x83 [ 48.016613] [ 48.016613] [ 48.016614] Code: 8b 00 89 44 24 08 8b 47 18 89 44 24 0c 8b 43 18 01 c0 09 c2 [ 48.016620] RIP [] :snd_pcm:snd_pcm_timer_init+0x2f/0x1a0 [ 48.016626] RSP [ 48.016627] CR2: 0000000000000001 [ 48.016629] ---[ end trace e836fc649b990912 ]--- [ 48.017248] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 48.045191] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 48.045196] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 48.045385] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 48.079637] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 58.123822] eth0: no IPv6 routers present [ 225.790008] lp0: using parport0 (interrupt-driven). [ 225.838509] it87: Found IT8712F chip at 0x290, revision 8 [ 225.838522] it87: in7 is VCCH (+5V Stand-By) [ 225.933865] Adding 2008116k swap on /dev/sda3. Priority:-1 extents:1 across:2008116k [ 226.523092] EXT3 FS on sda8, internal journal [ 228.562732] kjournald starting. Commit interval 5 seconds [ 228.563119] EXT3 FS on sda2, internal journal [ 228.563125] EXT3-fs: mounted filesystem with ordered data mode. [ 228.588896] kjournald starting. Commit interval 5 seconds [ 228.589280] EXT3 FS on sda5, internal journal [ 228.589284] EXT3-fs: mounted filesystem with ordered data mode. [ 228.619126] kjournald starting. Commit interval 5 seconds [ 228.622056] EXT3 FS on sda6, internal journal [ 228.622061] EXT3-fs: mounted filesystem with ordered data mode. [ 228.658776] kjournald starting. Commit interval 5 seconds [ 228.659141] EXT3 FS on sda7, internal journal [ 228.659144] EXT3-fs: mounted filesystem with ordered data mode. [ 228.693043] kjournald starting. Commit interval 5 seconds [ 228.693394] EXT3 FS on sda9, internal journal [ 228.693397] EXT3-fs: mounted filesystem with ordered data mode. [ 229.255467] ip_tables: (C) 2000-2006 Netfilter Core Team