[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff80000 (usable) [ 0.000000] BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Warning only 4GB will be used. [ 0.000000] Use a HIGHMEM64G enabled kernel. [ 0.000000] 3200MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1048576 [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 6400 pages used for memmap [ 0.000000] HighMem zone: 812800 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FAF00 checksum 0 [ 0.000000] ACPI: RSDP 000FAF00, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT BFF80100, 004C (r1 A_M_I_ OEMXSDT 1000817 MSFT 97) [ 0.000000] ACPI: FACP BFF80290, 00F4 (r3 A_M_I_ OEMFACP 1000817 MSFT 97) [ 0.000000] ACPI: DSDT BFF80590, 9554 (r1 A0543 A0543000 0 INTL 20060113) [ 0.000000] ACPI: FACS BFF8E000, 0040 [ 0.000000] ACPI: APIC BFF80390, 0080 (r1 A_M_I_ OEMAPIC 1000817 MSFT 97) [ 0.000000] ACPI: OEMB BFF8E040, 0066 (r1 A_M_I_ AMI_OEM 1000817 MSFT 97) [ 0.000000] ACPI: HPET BFF89AF0, 0038 (r1 A_M_I_ OEMHPET 1000817 MSFT 97) [ 0.000000] ACPI: MCFG BFF89B30, 003C (r1 A_M_I_ OEMMCFG 1000817 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 [ 0.000000] Kernel command line: root=UUID=3894d7e1-a6be-45e7-b671-3e9af0bf36c4 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2938.436 MHz processor. [ 33.688415] Console: colour VGA+ 80x25 [ 33.688417] console [tty0] enabled [ 33.688575] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 33.688743] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 33.809521] Memory: 3098884k/4194304k available (2157k kernel code, 45032k reserved, 998k data, 364k init, 2227712k highmem) [ 33.809525] virtual kernel memory layout: [ 33.809526] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 33.809526] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 33.809527] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 33.809528] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 33.809528] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 33.809529] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 33.809529] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 33.809531] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 33.809559] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 33.809647] hpet clockevent registered [ 33.889537] Calibrating delay using timer specific routine.. 5880.82 BogoMIPS (lpj=11761653) [ 33.889551] Security Framework initialized [ 33.889556] SELinux: Disabled at boot. [ 33.889565] AppArmor: AppArmor initialized [ 33.889567] Failure registering capabilities with primary security module. [ 33.889573] Mount-cache hash table entries: 512 [ 33.889655] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 33.889661] monitor/mwait feature present. [ 33.889662] using mwait in idle threads. [ 33.889664] CPU: L1 I cache: 32K, L1 D cache: 32K [ 33.889666] CPU: L2 cache: 2048K [ 33.889667] CPU: Physical Processor ID: 0 [ 33.889668] CPU: Processor Core ID: 0 [ 33.889669] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 33.889675] Compat vDSO mapped to ffffe000. [ 33.889683] Checking 'hlt' instruction... OK. [ 33.905795] SMP alternatives: switching to UP code [ 33.906771] Early unpacking initramfs... done [ 34.100164] ACPI: Core revision 20070126 [ 34.100198] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 34.113953] CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d [ 34.113964] SMP alternatives: switching to SMP code [ 34.114403] Booting processor 1/1 eip 3000 [ 34.124464] Initializing CPU#1 [ 34.205084] Calibrating delay using timer specific routine.. 5876.68 BogoMIPS (lpj=11753378) [ 34.205088] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 34.205091] monitor/mwait feature present. [ 34.205093] CPU: L1 I cache: 32K, L1 D cache: 32K [ 34.205094] CPU: L2 cache: 2048K [ 34.205095] CPU: Physical Processor ID: 0 [ 34.205096] CPU: Processor Core ID: 1 [ 34.205096] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 34.205455] CPU1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d [ 34.205467] Total of 2 processors activated (11757.51 BogoMIPS). [ 34.205605] ENABLING IO-APIC IRQs [ 34.205761] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 34.372913] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 34.392893] Brought up 2 CPUs [ 34.392910] CPU0 attaching sched-domain: [ 34.392912] domain 0: span 03 [ 34.392913] groups: 01 02 [ 34.392915] CPU1 attaching sched-domain: [ 34.392915] domain 0: span 03 [ 34.392916] groups: 02 01 [ 34.393040] net_namespace: 64 bytes [ 34.393046] Booting paravirtualized kernel on bare hardware [ 34.393322] Time: 8:44:42 Date: 05/01/08 [ 34.393339] NET: Registered protocol family 16 [ 34.393443] EISA bus registered [ 34.393446] ACPI: bus type pci registered [ 34.393584] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 34.393586] PCI: Using configuration type 1 [ 34.393586] Setting up standard PCI resources [ 34.399857] ACPI: EC: Look up EC in DSDT [ 34.404985] ACPI: Interpreter enabled [ 34.404987] ACPI: (supports S0 S1 S3 S4 S5) [ 34.404996] ACPI: Using IOAPIC for interrupt routing [ 34.409057] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 34.409504] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 34.409507] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 34.410045] PCI: Transparent bridge - 0000:00:1e.0 [ 34.410070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 34.410159] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 34.410213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 34.410284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 34.410338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 34.410385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 34.411843] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 34.411919] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 34.411993] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 34.412068] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 34.412142] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 34.412216] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 34.412291] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 34.412366] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 34.412440] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 7C, should be 73 [20070126] [ 34.412445] Linux Plug and Play Support v0.97 (c) Adam Belay [ 34.412462] pnp: PnP ACPI init [ 34.412466] ACPI: bus type pnp registered [ 34.414395] pnp: PnP ACPI: found 16 devices [ 34.414397] ACPI: ACPI bus type pnp unregistered [ 34.414399] PnPBIOS: Disabled by ACPI PNP [ 34.414522] PCI: Using ACPI for IRQ routing [ 34.414524] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 34.444797] NET: Registered protocol family 8 [ 34.444799] NET: Registered protocol family 20 [ 34.444830] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 34.444835] hpet0: 3 64-bit timers, 14318180 Hz [ 34.445854] AppArmor: AppArmor Filesystem Enabled [ 34.448792] Time: tsc clocksource has been installed. [ 34.456870] Switched to high resolution mode on CPU 1 [ 34.460808] Switched to high resolution mode on CPU 0 [ 34.464793] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 34.464803] system 00:07: ioport range 0x290-0x297 has been reserved [ 34.464809] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 34.464812] system 00:08: ioport range 0x800-0x87f has been reserved [ 34.464815] system 00:08: ioport range 0x400-0x41f has been reserved [ 34.464817] system 00:08: ioport range 0x480-0x4bf has been reserved [ 34.464820] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 34.464823] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 34.464826] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 34.464829] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved [ 34.464832] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 34.464840] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 34.464843] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 34.464849] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved [ 34.464856] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 34.464858] system 00:0f: iomem range 0xc0000-0xdffff could not be reserved [ 34.464861] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 34.464864] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved [ 34.464867] system 00:0f: iomem range 0x0-0x0 could not be reserved [ 34.495065] PCI: Bridge: 0000:00:01.0 [ 34.495067] IO window: c000-cfff [ 34.495069] MEM window: f8a00000-feafffff [ 34.495071] PREFETCH window: cff00000-efefffff [ 34.495073] PCI: Bridge: 0000:00:1c.0 [ 34.495074] IO window: disabled. [ 34.495077] MEM window: disabled. [ 34.495079] PREFETCH window: cfe00000-cfefffff [ 34.495083] PCI: Bridge: 0000:00:1c.3 [ 34.495084] IO window: b000-bfff [ 34.495087] MEM window: f8900000-f89fffff [ 34.495090] PREFETCH window: disabled. [ 34.495093] PCI: Bridge: 0000:00:1c.4 [ 34.495094] IO window: a000-afff [ 34.495098] MEM window: f8800000-f88fffff [ 34.495100] PREFETCH window: disabled. [ 34.495103] PCI: Bridge: 0000:00:1e.0 [ 34.495104] IO window: disabled. [ 34.495107] MEM window: disabled. [ 34.495109] PREFETCH window: disabled. [ 34.495119] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.495122] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 34.495134] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.495138] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 34.495150] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 34.495153] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 34.495166] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.495169] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 34.495176] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 34.495183] NET: Registered protocol family 2 [ 34.532716] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 34.532870] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 34.533158] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 34.533319] TCP: Hash tables configured (established 131072 bind 65536) [ 34.533321] TCP reno registered [ 34.544769] checking if image is initramfs... it is [ 34.924990] Freeing initrd memory: 7268k freed [ 34.925446] audit: initializing netlink socket (disabled) [ 34.925455] audit(1209631481.969:1): initialized [ 34.925615] highmem bounce pool size: 64 pages [ 34.926701] VFS: Disk quotas dquot_6.5.1 [ 34.926743] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 34.926822] io scheduler noop registered [ 34.926823] io scheduler anticipatory registered [ 34.926825] io scheduler deadline registered [ 34.926831] io scheduler cfq registered (default) [ 34.926901] Boot video device is 0000:05:00.0 [ 34.926960] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 34.926983] assign_interrupt_mode Found MSI capability [ 34.927003] Allocate Port Service[0000:00:01.0:pcie00] [ 34.927048] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 34.927079] assign_interrupt_mode Found MSI capability [ 34.927104] Allocate Port Service[0000:00:1c.0:pcie00] [ 34.927122] Allocate Port Service[0000:00:1c.0:pcie02] [ 34.927176] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 34.927206] assign_interrupt_mode Found MSI capability [ 34.927231] Allocate Port Service[0000:00:1c.3:pcie00] [ 34.927285] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 34.927314] assign_interrupt_mode Found MSI capability [ 34.927339] Allocate Port Service[0000:00:1c.4:pcie00] [ 34.927478] isapnp: Scanning for PnP cards... [ 35.280043] isapnp: No Plug & Play device found [ 35.293708] Real Time Clock Driver v1.12ac [ 35.293826] hpet_resources: 0xfed00000 is busy [ 35.293848] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 35.293943] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.294366] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.294778] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 35.294816] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 35.294871] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 35.297452] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 35.297455] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 35.313008] mice: PS/2 mouse device common for all mice [ 35.313068] EISA: Probing bus 0 at eisa.0 [ 35.313089] EISA: Detected 0 cards. [ 35.313091] cpuidle: using governor ladder [ 35.313092] cpuidle: using governor menu [ 35.313142] NET: Registered protocol family 1 [ 35.313159] Using IPI No-Shortcut mode [ 35.313184] registered taskstats version 1 [ 35.313244] Magic number: 8:597:724 [ 35.313281] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 35.313282] EDD information not available. [ 35.313393] Freeing unused kernel memory: 364k freed [ 35.337686] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 36.435027] fuse init (API version 7.9) [ 36.446467] ACPI: Processor [CPU1] (supports 8 throttling states) [ 36.446777] ACPI: Processor [CPU2] (supports 8 throttling states) [ 36.446786] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 36.446793] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 36.655122] usbcore: registered new interface driver usbfs [ 36.655136] usbcore: registered new interface driver hub [ 36.655154] usbcore: registered new device driver usb [ 36.655812] USB Universal Host Controller Interface driver v3.0 [ 36.655845] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18 [ 36.655852] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 36.655855] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 36.656018] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 36.656041] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e480 [ 36.656125] usb usb1: configuration #1 chosen from 1 choice [ 36.656138] hub 1-0:1.0: USB hub found [ 36.656141] hub 1-0:1.0: 2 ports detected [ 36.719944] SCSI subsystem initialized [ 36.733007] Floppy drive(s): fd0 is 1.44M [ 36.733164] libata version 3.00 loaded. [ 36.751162] FDC 0 is a post-1991 82077 [ 36.758508] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19 [ 36.758517] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 36.758519] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 36.758533] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 36.758555] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 36.758621] usb usb2: configuration #1 chosen from 1 choice [ 36.758635] hub 2-0:1.0: USB hub found [ 36.758637] hub 2-0:1.0: 2 ports detected [ 36.862361] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 36.862369] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 36.862372] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 36.862386] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 36.862407] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e880 [ 36.862472] usb usb3: configuration #1 chosen from 1 choice [ 36.862485] hub 3-0:1.0: USB hub found [ 36.862488] hub 3-0:1.0: 2 ports detected [ 36.966209] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 36.966217] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 36.966220] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 36.966234] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 36.966255] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000ec00 [ 36.966321] usb usb4: configuration #1 chosen from 1 choice [ 36.966335] hub 4-0:1.0: USB hub found [ 36.966337] hub 4-0:1.0: 2 ports detected [ 37.069122] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18 [ 37.069131] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 37.069134] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 37.069148] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 37.073048] ehci_hcd 0000:00:1d.7: debug port 1 [ 37.073052] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 37.073056] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfebfbc00 [ 37.088973] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 37.089052] usb usb5: configuration #1 chosen from 1 choice [ 37.089066] hub 5-0:1.0: USB hub found [ 37.089070] hub 5-0:1.0: 8 ports detected [ 37.189079] ahci 0000:00:1f.2: version 3.0 [ 37.189097] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 21 [ 37.189141] ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround [ 37.468427] usb 5-7: new high speed USB device using ehci_hcd and address 2 [ 37.601569] usb 5-7: configuration #1 chosen from 1 choice [ 37.601866] hub 5-7:1.0: USB hub found [ 37.602102] hub 5-7:1.0: 4 ports detected [ 38.191412] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 38.191417] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part [ 38.191422] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 38.191587] scsi0 : ahci [ 38.191685] scsi1 : ahci [ 38.191751] scsi2 : ahci [ 38.191817] scsi3 : ahci [ 38.191837] ata1: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb900 irq 219 [ 38.191839] ata2: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb980 irq 219 [ 38.191841] ata3: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba00 irq 219 [ 38.191843] ata4: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba80 irq 219 [ 38.722616] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 38.725492] ata1.00: ATA-6: ST3120026AS, 3.05, max UDMA/133 [ 38.725495] ata1.00: 234441648 sectors, multi 16: LBA48 [ 38.728601] ata1.00: configured for UDMA/133 [ 41.215011] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 41.216086] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100, ATAPI AN [ 41.371663] ata2.00: configured for UDMA/100 [ 41.682321] ata3: SATA link down (SStatus 0 SControl 300) [ 41.993869] ata4: SATA link down (SStatus 0 SControl 300) [ 41.993989] scsi 0:0:0:0: Direct-Access ATA ST3120026AS 3.05 PQ: 0 ANSI: 5 [ 41.994641] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5 [ 41.994832] ata_piix 0000:00:1f.1: version 2.12 [ 41.994846] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 41.994872] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 41.994908] scsi4 : ata_piix [ 41.994988] scsi5 : ata_piix [ 41.995695] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 41.995697] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 42.000238] Driver 'sd' needs updating - please use bus_type methods [ 42.000286] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 42.000293] sd 0:0:0:0: [sda] Write Protect is off [ 42.000294] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.000304] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.000337] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 42.000343] sd 0:0:0:0: [sda] Write Protect is off [ 42.000344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.000353] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.000355] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 42.012786] sda1 sda2 sda3 [ 42.027580] sd 0:0:0:0: [sda] Attached SCSI disk [ 42.030829] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 42.030841] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 42.032393] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 42.032396] Uniform CD-ROM driver Revision: 3.20 [ 42.032423] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 42.357639] ata5.00: HPA unlocked: 312579695 -> 312581808, native 312581808 [ 42.357643] ata5.00: ATA-6: ST3160023A, 3.01, max UDMA/100 [ 42.357644] ata5.00: 312581808 sectors, multi 16: LBA48 [ 42.357827] ata5.01: ATA-7: HDT722516DLAT80, V43OA70A, max UDMA/133 [ 42.357831] ata5.01: 321672960 sectors, multi 16: LBA48 [ 42.374754] ata5.00: configured for UDMA/100 [ 42.389707] ata5.01: configured for UDMA/100 [ 42.555758] scsi 4:0:0:0: Direct-Access ATA ST3160023A 3.01 PQ: 0 ANSI: 5 [ 42.555808] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 42.555816] sd 4:0:0:0: [sdb] Write Protect is off [ 42.555817] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 42.555828] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.555858] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 42.555864] sd 4:0:0:0: [sdb] Write Protect is off [ 42.555865] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 42.555875] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.555877] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > [ 42.618784] sd 4:0:0:0: [sdb] Attached SCSI disk [ 42.618804] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 42.618849] scsi 4:0:1:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0 ANSI: 5 [ 42.618885] sd 4:0:1:0: [sdc] 321672960 512-byte hardware sectors (164697 MB) [ 42.618891] sd 4:0:1:0: [sdc] Write Protect is off [ 42.618892] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 42.618902] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.619286] sd 4:0:1:0: [sdc] 321672960 512-byte hardware sectors (164697 MB) [ 42.619293] sd 4:0:1:0: [sdc] Write Protect is off [ 42.619294] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 42.619306] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.619308] sdc: sdc1 sdc2 sdc4 < sdc5 sdc6 > [ 42.663813] sd 4:0:1:0: [sdc] Attached SCSI disk [ 42.663829] sd 4:0:1:0: Attached scsi generic sg3 type 0 [ 47.337635] kjournald starting. Commit interval 5 seconds [ 47.337640] EXT3-fs: mounted filesystem with ordered data mode. [ 53.797859] ip_tables: (C) 2000-2006 Netfilter Core Team [ 53.823021] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 54.200209] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 54.236170] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 54.273081] EDAC MC: Ver: 2.1.0 Apr 10 2008 [ 54.321359] input: Power Button (FF) as /devices/virtual/input/input2 [ 54.352942] ACPI: Power Button (FF) [PWRF] [ 54.353033] input: Power Button (CM) as /devices/virtual/input/input3 [ 54.376911] ACPI: Power Button (CM) [PWRB] [ 54.400926] EDAC i82975x: ECC disabled on both channels. [ 54.824311] Linux agpgart interface v0.102 [ 54.876252] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 54.876261] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 54.876283] sky2 0000:03:00.0: v1.20 addr 0xf89fc000 irq 17 Yukon-EC (0xb6) rev 2 [ 54.876622] sky2 eth0: addr 00:1d:60:39:f1:a0 [ 54.876637] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 54.876642] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 54.876659] sky2 0000:02:00.0: v1.20 addr 0xf88fc000 irq 16 Yukon-EC (0xb6) rev 2 [ 54.876943] sky2 eth1: addr 00:1d:60:39:e9:d6 [ 54.916488] iTCO_vendor_support: vendor-support=0 [ 54.961260] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 54.961317] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 54.961338] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 55.175417] nvidia: module license 'NVIDIA' taints kernel. [ 55.442465] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 55.442472] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 55.442533] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 55.448502] intel_rng: FWH not detected [ 55.535512] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 55.686406] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 55.686418] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 55.903959] input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input5 [ 56.184190] loop: module loaded [ 56.224609] lp: driver loaded but no devices found [ 56.292344] w83627ehf: Found W83627DHG chip at 0x290 [ 56.301317] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! [ 56.301345] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! [ 56.407273] Adding 10482404k swap on /dev/sda2. Priority:-1 extents:1 across:10482404k [ 56.844205] EXT3 FS on sda1, internal journal [ 57.357805] kjournald starting. Commit interval 5 seconds [ 57.358044] EXT3 FS on sda3, internal journal [ 57.358048] EXT3-fs: mounted filesystem with ordered data mode. [ 59.229989] No dock devices found. [ 60.033476] ppdev: user-space parallel port driver [ 60.171154] audit(1209624308.023:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5747 profile="/usr/sbin/cupsd" namespace="default" [ 60.208028] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 60.208031] apm: disabled - APM is not SMP safe. [ 68.210592] sky2 eth1: enabling interface [ 68.241305] sky2 eth0: enabling interface [ 70.062007] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 72.822659] NET: Registered protocol family 17 [ 75.679638] NET: Registered protocol family 10 [ 75.679814] lo: Disabled Privacy Extensions [ 75.680257] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 86.150842] eth0: no IPv6 routers present