[ 0.000000] Linux version 2.6.24-15-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Apr 8 00:33:51 UTC 2008 (Ubuntu 2.6.24-15.27-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfedf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 2174MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6740 [ 0.000000] Entering add_active_range(0, 0, 786128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 786128 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 786128 [ 0.000000] On node 0 totalpages: 786128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4349 pages used for memmap [ 0.000000] HighMem zone: 552403 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F66C0 checksum 0 [ 0.000000] ACPI: RSDP 000F66C0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BFED572F, 008C (r1 MEDION MEDIONAG 6040000 LTP 0) [ 0.000000] ACPI: FACP BFEDBBD2, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT BFED6BD6, 4F88 (r2 INTEL CRESTLNE 6040000 INTL 20050624) [ 0.000000] ACPI: FACS BFEDEFC0, 0040 [ 0.000000] ACPI: APIC BFEDBCC6, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET BFEDBD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG BFEDBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA BFEDBDA2, 0032 (r1 Intel CRESTLN 6040000 5A52) [ 0.000000] ACPI: TMOR BFEDBDD4, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: APIC BFEDBDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: SLIC BFEDBE62, 0176 (r1 MEDION MEDIONAG 6040000 LTP 1) [ 0.000000] ACPI: BOOT BFEDBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT BFED68F2, 02E4 (r1 SataRe SataAhci 1000 INTL 20050624) [ 0.000000] ACPI: SSDT BFED5D47, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT BFED5CA1, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT BFED57BB, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779987 [ 0.000000] Kernel command line: root=UUID=f79dd5f0-263d-4bad-a9f3-76f59a091d14 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1662.548 MHz processor. [ 22.806124] Console: colour VGA+ 80x25 [ 22.806128] console [tty0] enabled [ 22.806425] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 22.806733] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 22.976611] Memory: 3105932k/3144512k available (2164k kernel code, 37256k reserved, 1006k data, 364k init, 2227008k highmem) [ 22.976618] virtual kernel memory layout: [ 22.976619] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 22.976620] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 22.976622] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 22.976623] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 22.976624] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 22.976625] .data : 0xc031d2ad - 0xc0418dc4 (1006 kB) [ 22.976626] .text : 0xc0100000 - 0xc031d2ad (2164 kB) [ 22.976629] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 22.976671] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 22.976820] hpet clockevent registered [ 23.056704] Calibrating delay using timer specific routine.. 3328.77 BogoMIPS (lpj=6657543) [ 23.056726] Security Framework initialized [ 23.056732] SELinux: Disabled at boot. [ 23.056746] AppArmor: AppArmor initialized [ 23.056750] Failure registering capabilities with primary security module. [ 23.056758] Mount-cache hash table entries: 512 [ 23.056882] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 23.056891] monitor/mwait feature present. [ 23.056893] using mwait in idle threads. [ 23.056897] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.056899] CPU: L2 cache: 2048K [ 23.056902] CPU: Physical Processor ID: 0 [ 23.056903] CPU: Processor Core ID: 0 [ 23.056905] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 23.056915] Compat vDSO mapped to ffffe000. [ 23.056927] Checking 'hlt' instruction... OK. [ 23.073066] SMP alternatives: switching to UP code [ 23.074699] Early unpacking initramfs... done [ 23.431975] ACPI: Core revision 20070126 [ 23.432017] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 23.441789] CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d [ 23.441805] SMP alternatives: switching to SMP code [ 23.442498] Booting processor 1/1 eip 3000 [ 23.452704] Initializing CPU#1 [ 23.531970] Calibrating delay using timer specific routine.. 3324.89 BogoMIPS (lpj=6649797) [ 23.531977] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 23.531982] monitor/mwait feature present. [ 23.531985] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.531987] CPU: L2 cache: 2048K [ 23.531989] CPU: Physical Processor ID: 0 [ 23.531990] CPU: Processor Core ID: 1 [ 23.531992] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 23.532509] CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d [ 23.532531] Total of 2 processors activated (6653.67 BogoMIPS). [ 23.532710] ENABLING IO-APIC IRQs [ 23.532904] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 23.679849] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 23.699833] Brought up 2 CPUs [ 23.699856] CPU0 attaching sched-domain: [ 23.699859] domain 0: span 03 [ 23.699860] groups: 01 02 [ 23.699864] CPU1 attaching sched-domain: [ 23.699865] domain 0: span 03 [ 23.699867] groups: 02 01 [ 23.700075] net_namespace: 64 bytes [ 23.700085] Booting paravirtualized kernel on bare hardware [ 23.700568] Time: 10:57:34 Date: 04/11/08 [ 23.700619] NET: Registered protocol family 16 [ 23.700798] EISA bus registered [ 23.700803] ACPI: bus type pci registered [ 23.701221] PCI: PCI BIOS revision 3.00 entry at 0xfddb1, last bus=8 [ 23.701223] PCI: Using configuration type 1 [ 23.701225] Setting up standard PCI resources [ 23.703528] ACPI: EC: Look up EC in DSDT [ 23.705427] ACPI: BIOS _OSI(Linux) query ignored [ 23.705429] ACPI: DMI System Vendor: Notebook [ 23.705431] ACPI: DMI Product Name: MIM2300 [ 23.705433] ACPI: DMI Product Version: Not Applicable [ 23.705434] ACPI: DMI Board Name: MIM2300 [ 23.705436] ACPI: DMI BIOS Vendor: Phoenix Technologies LTD [ 23.705437] ACPI: DMI BIOS Date: 12/12/2007 [ 23.705439] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org [ 23.705441] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 23.706214] ACPI: Interpreter enabled [ 23.706217] ACPI: (supports S0 S3 S4 S5) [ 23.706232] ACPI: Using IOAPIC for interrupt routing [ 23.947916] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 23.947919] ACPI: EC: driver started in poll mode [ 23.947960] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 23.948959] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 23.948964] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 23.950235] PCI: Transparent bridge - 0000:00:1e.0 [ 23.950286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 23.950651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 23.950778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 23.950903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 23.951025] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 23.951166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 23.956372] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 23.956469] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 23.956564] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 23.956658] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 23.956751] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 23.956845] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 23.956938] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 23.957031] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 23.957177] Linux Plug and Play Support v0.97 (c) Adam Belay [ 23.957207] pnp: PnP ACPI init [ 23.957214] ACPI: bus type pnp registered [ 24.075333] pnp: PnP ACPI: found 10 devices [ 24.075336] ACPI: ACPI bus type pnp unregistered [ 24.075340] PnPBIOS: Disabled by ACPI PNP [ 24.075564] PCI: Using ACPI for IRQ routing [ 24.075566] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 24.075596] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 24.167007] NET: Registered protocol family 8 [ 24.167009] NET: Registered protocol family 20 [ 24.167041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 24.167045] hpet0: 3 64-bit timers, 14318180 Hz [ 24.168078] AppArmor: AppArmor Filesystem Enabled [ 24.170995] Time: tsc clocksource has been installed. [ 24.171007] Switched to high resolution mode on CPU 0 [ 24.171104] Switched to high resolution mode on CPU 1 [ 24.186944] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 24.186947] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 24.186950] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 24.186953] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 24.186956] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 24.186959] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 24.186961] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 24.186964] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 24.186972] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 24.186979] system 00:06: ioport range 0x680-0x69f has been reserved [ 24.186981] system 00:06: ioport range 0x800-0x80f has been reserved [ 24.186984] system 00:06: ioport range 0x1000-0x107f has been reserved [ 24.186987] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 24.186989] system 00:06: ioport range 0x1640-0x164f has been reserved [ 24.186992] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 24.217364] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 [ 24.217367] PCI: Bridge: 0000:00:01.0 [ 24.217369] IO window: 2000-2fff [ 24.217373] MEM window: cc000000-ceffffff [ 24.217376] PREFETCH window: d0000000-dfffffff [ 24.217380] PCI: Bridge: 0000:00:1c.0 [ 24.217383] IO window: 3000-3fff [ 24.217390] MEM window: f6000000-f7ffffff [ 24.217395] PREFETCH window: f0000000-f1ffffff [ 24.217402] PCI: Bridge: 0000:00:1c.2 [ 24.217405] IO window: 4000-4fff [ 24.217411] MEM window: f8000000-f9ffffff [ 24.217416] PREFETCH window: f2000000-f3ffffff [ 24.217422] PCI: Bridge: 0000:00:1c.3 [ 24.217426] IO window: 5000-5fff [ 24.217432] MEM window: fa000000-fbffffff [ 24.217437] PREFETCH window: f4000000-f5ffffff [ 24.217443] PCI: Bridge: 0000:00:1e.0 [ 24.217445] IO window: disabled. [ 24.217451] MEM window: disabled. [ 24.217455] PREFETCH window: disabled. [ 24.217473] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 24.217478] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 24.217505] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 24.217511] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 24.217537] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 24.217543] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 24.217570] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 24.217576] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 24.217591] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 24.217603] NET: Registered protocol family 2 [ 24.254866] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 24.255093] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 24.255516] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 24.255727] TCP: Hash tables configured (established 131072 bind 65536) [ 24.255730] TCP reno registered [ 24.266922] checking if image is initramfs... it is [ 24.969092] Freeing initrd memory: 7674k freed [ 24.969241] Simple Boot Flag at 0x36 set to 0x1 [ 24.969846] audit: initializing netlink socket (disabled) [ 24.969859] audit(1207911454.865:1): initialized [ 24.970110] highmem bounce pool size: 64 pages [ 24.972013] VFS: Disk quotas dquot_6.5.1 [ 24.972084] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 24.972214] io scheduler noop registered [ 24.972216] io scheduler anticipatory registered [ 24.972218] io scheduler deadline registered [ 24.972228] io scheduler cfq registered (default) [ 24.972368] Boot video device is 0000:01:00.0 [ 24.972469] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 24.972510] assign_interrupt_mode Found MSI capability [ 24.972544] Allocate Port Service[0000:00:01.0:pcie00] [ 24.972575] Allocate Port Service[0000:00:01.0:pcie02] [ 24.972658] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 24.972721] assign_interrupt_mode Found MSI capability [ 24.972772] Allocate Port Service[0000:00:1c.0:pcie00] [ 24.972802] Allocate Port Service[0000:00:1c.0:pcie02] [ 24.972909] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 24.972973] assign_interrupt_mode Found MSI capability [ 24.973024] Allocate Port Service[0000:00:1c.2:pcie00] [ 24.973054] Allocate Port Service[0000:00:1c.2:pcie02] [ 24.973160] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 24.973225] assign_interrupt_mode Found MSI capability [ 24.973275] Allocate Port Service[0000:00:1c.3:pcie00] [ 24.973309] Allocate Port Service[0000:00:1c.3:pcie02] [ 24.973565] isapnp: Scanning for PnP cards... [ 25.328521] isapnp: No Plug & Play device found [ 25.352748] Real Time Clock Driver v1.12ac [ 25.352962] hpet_resources: 0xfed00000 is busy [ 25.352993] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 25.354137] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 25.354200] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 25.354292] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 25.356595] i8042.c: Detected active multiplexing controller, rev 1.1. [ 25.358160] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.358165] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 25.358167] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 25.358169] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 25.358172] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 25.382142] mice: PS/2 mouse device common for all mice [ 25.382250] EISA: Probing bus 0 at eisa.0 [ 25.382257] Cannot allocate resource for EISA slot 1 [ 25.382260] Cannot allocate resource for EISA slot 2 [ 25.382262] Cannot allocate resource for EISA slot 3 [ 25.382264] Cannot allocate resource for EISA slot 4 [ 25.382266] Cannot allocate resource for EISA slot 5 [ 25.382281] EISA: Detected 0 cards. [ 25.382284] cpuidle: using governor ladder [ 25.382286] cpuidle: using governor menu [ 25.382364] NET: Registered protocol family 1 [ 25.382391] Using IPI No-Shortcut mode [ 25.382417] registered taskstats version 1 [ 25.382529] Magic number: 4:315:982 [ 25.382535] hash matches device ttyc9 [ 25.382600] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 25.382602] EDD information not available. [ 25.382795] Freeing unused kernel memory: 364k freed [ 25.414451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 26.601473] fuse init (API version 7.9) [ 26.623845] ACPI: SSDT BFED6634, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 26.624057] ACPI: SSDT BFED5FA6, 0609 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 26.625995] Monitor-Mwait will be used to enter C-1 state [ 26.625998] Monitor-Mwait will be used to enter C-2 state [ 26.626001] Monitor-Mwait will be used to enter C-3 state [ 26.626123] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 26.626128] ACPI: Processor [CPU0] (supports 8 throttling states) [ 26.626370] ACPI: SSDT BFED682A, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 26.626566] ACPI: SSDT BFED65AF, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 26.627527] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 26.627532] ACPI: Processor [CPU1] (supports 8 throttling states) [ 26.629071] ACPI: Thermal Zone [TZ00] (61 C) [ 26.629394] ACPI: Thermal Zone [TZ01] (64 C) [ 26.798376] usbcore: registered new interface driver usbfs [ 26.798400] usbcore: registered new interface driver hub [ 26.798698] usbcore: registered new device driver usb [ 26.809433] USB Universal Host Controller Interface driver v3.0 [ 26.809490] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.809502] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 26.809507] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 26.809722] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 26.809757] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 26.809891] usb usb1: configuration #1 chosen from 1 choice [ 26.809915] hub 1-0:1.0: USB hub found [ 26.809920] hub 1-0:1.0: 2 ports detected [ 26.911831] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 26.911844] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 26.911848] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 26.911876] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 26.911910] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820 [ 26.912021] usb usb2: configuration #1 chosen from 1 choice [ 26.912044] hub 2-0:1.0: USB hub found [ 26.912048] hub 2-0:1.0: 2 ports detected [ 27.015649] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 27.015661] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 27.015665] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 27.015689] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 27.015724] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001840 [ 27.015840] usb usb3: configuration #1 chosen from 1 choice [ 27.015863] hub 3-0:1.0: USB hub found [ 27.015868] hub 3-0:1.0: 2 ports detected [ 27.046317] SCSI subsystem initialized [ 27.074449] libata version 3.00 loaded. [ 27.119485] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 27.119497] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 27.119502] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 27.119525] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 27.119561] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 27.119677] usb usb4: configuration #1 chosen from 1 choice [ 27.119701] hub 4-0:1.0: USB hub found [ 27.119705] hub 4-0:1.0: 2 ports detected [ 27.223337] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 27.223350] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 27.223354] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 27.223379] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 27.223414] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 27.223531] usb usb5: configuration #1 chosen from 1 choice [ 27.223555] hub 5-0:1.0: USB hub found [ 27.223560] hub 5-0:1.0: 2 ports detected [ 27.326221] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 27.326237] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 27.326241] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 27.326267] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 27.330162] ehci_hcd 0000:00:1a.7: debug port 1 [ 27.330169] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 27.330175] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc204800 [ 27.347051] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 27.347164] usb usb6: configuration #1 chosen from 1 choice [ 27.347188] hub 6-0:1.0: USB hub found [ 27.347193] hub 6-0:1.0: 4 ports detected [ 27.450991] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 [ 27.451006] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 27.451010] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 27.451037] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 27.454985] ehci_hcd 0000:00:1d.7: debug port 1 [ 27.454994] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 27.455000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc204c00 [ 27.470853] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 27.470957] usb usb7: configuration #1 chosen from 1 choice [ 27.470981] hub 7-0:1.0: USB hub found [ 27.470987] hub 7-0:1.0: 6 ports detected [ 27.574808] r8169 Gigabit Ethernet driver 2.2LK loaded [ 27.574846] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 27.574868] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 27.575217] eth0: RTL8101e at 0xf883e000, 00:40:d0:e5:f6:7b, XID 34200000 IRQ 219 [ 27.576123] ahci 0000:00:1f.2: version 3.0 [ 27.576149] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 27.853249] usb 6-4: new high speed USB device using ehci_hcd and address 2 [ 28.001990] usb 6-4: configuration #1 chosen from 1 choice [ 28.096879] Clocksource tsc unstable (delta = -11041314563 ns) [ 28.100868] Time: hpet clocksource has been installed. [ 28.128961] usbcore: registered new interface driver libusual [ 28.134249] Initializing USB Mass Storage driver... [ 28.166880] usb 7-5: new high speed USB device using ehci_hcd and address 2 [ 28.245766] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 28.245769] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 28.245775] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 28.246026] scsi0 : ahci [ 28.246232] scsi1 : ahci [ 28.246377] scsi2 : ahci [ 28.246464] ata1: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204100 irq 218 [ 28.246467] ata2: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204180 irq 218 [ 28.246471] ata3: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204200 irq 218 [ 28.315982] usb 7-5: configuration #1 chosen from 1 choice [ 28.465903] scsi3 : SCSI emulation for USB Mass Storage devices [ 28.465962] usb-storage: device found at 2 [ 28.465964] usb-storage: waiting for device to settle before scanning [ 28.465974] usbcore: registered new interface driver usb-storage [ 28.465978] USB Mass Storage support registered. [ 28.482768] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 28.622519] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 28.755636] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133 [ 28.755640] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 28.756553] ata1.00: configured for UDMA/133 [ 28.759555] usb 5-2: configuration #1 chosen from 1 choice [ 28.793647] ata2: SATA link down (SStatus 0 SControl 300) [ 28.806510] ata3: SATA link down (SStatus 0 SControl 300) [ 28.806709] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5 [ 28.807037] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 28.807073] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 28.807087] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 28.815569] Driver 'sd' needs updating - please use bus_type methods [ 28.817656] ata_piix 0000:00:1f.1: version 2.12 [ 28.817672] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 28.817703] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 28.817784] scsi4 : ata_piix [ 28.817833] scsi5 : ata_piix [ 28.818374] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 28.818377] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 28.821218] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 28.821257] sd 0:0:0:0: [sda] Write Protect is off [ 28.821260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.821324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.821401] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 28.821429] sd 0:0:0:0: [sda] Write Protect is off [ 28.821432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.821474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.821477] sda: sda1 sda2 < sda5 sda6 > sda3 sda4 [ 28.893858] sd 0:0:0:0: [sda] Attached SCSI disk [ 28.898488] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 29.123112] Attempting manual resume [ 29.123115] swsusp: Resume From Partition 8:6 [ 29.123117] PM: Checking swsusp image. [ 29.123304] PM: Resume from disk failed. [ 29.149079] ata4.00: ATAPI: TSSTcorp CDDVDW SN-S082H, SB00, max UDMA/33 [ 29.162106] kjournald starting. Commit interval 5 seconds [ 29.162134] EXT3-fs: mounted filesystem with ordered data mode. [ 29.335702] ata4.00: configured for UDMA/33 [ 29.506108] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S082H SB00 PQ: 0 ANSI: 5 [ 29.506182] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 32.730971] usb-storage: device scan complete [ 32.736930] scsi 3:0:0:0: Direct-Access Generic- SD/MMC/MS/MSPro 1.00 PQ: 0 ANSI: 0 CCS [ 32.738562] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 32.738594] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 36.225211] iTCO_vendor_support: vendor-support=0 [ 36.302555] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 36.319076] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.345016] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 36.345096] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 36.345137] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 36.377608] Linux agpgart interface v0.102 [ 36.446255] input: Power Button (FF) as /devices/virtual/input/input2 [ 36.468805] ACPI: Power Button (FF) [PWRF] [ 36.468927] input: Power Button (CM) as /devices/virtual/input/input3 [ 36.476866] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 36.500748] ACPI: Power Button (CM) [PWRB] [ 36.500850] input: Lid Switch as /devices/virtual/input/input5 [ 36.517953] ACPI: Lid Switch [LID0] [ 36.518034] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 36.764345] ACPI: Sleep Button (CM) [SLPB] [ 36.888208] ACPI: AC Adapter [AC] (on-line) [ 37.241885] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000 [ 37.274387] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7 [ 37.280672] ACPI: Battery Slot [BAT0] (battery present) [ 37.283519] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8 [ 37.391360] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no) [ 37.649539] nvidia: module license 'NVIDIA' taints kernel. [ 37.934923] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 37.934952] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 37.946665] Driver 'sr' needs updating - please use bus_type methods [ 37.972284] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 37.980147] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 37.980606] hda_codec: Cannot set up configuration from BIOS. Using base mode... [ 37.981365] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1470: SPDIF already defined [ 37.986944] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 37.986948] Uniform CD-ROM driver Revision: 3.20 [ 37.987002] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 38.062334] Bluetooth: Core ver 2.11 [ 38.079909] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.079926] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 38.080045] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 38.099728] hci_usb: Unknown symbol hci_suspend_dev [ 38.099763] hci_usb: Unknown symbol hci_free_dev [ 38.100147] hci_usb: Unknown symbol hci_resume_dev [ 38.100228] hci_usb: Unknown symbol hci_alloc_dev [ 38.100378] hci_usb: Unknown symbol hci_unregister_dev [ 38.100468] hci_usb: Unknown symbol hci_recv_fragment [ 38.100544] hci_usb: Unknown symbol hci_register_dev [ 38.107005] NET: Registered protocol family 31 [ 38.107008] Bluetooth: HCI device and connection manager initialized [ 38.107012] Bluetooth: HCI socket layer initialized [ 38.108379] Bluetooth: HCI USB driver ver 2.9 [ 38.109928] usbcore: registered new interface driver hci_usb [ 39.059280] lp: driver loaded but no devices found [ 39.104636] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 39.212580] ndiswrapper: driver rt2860 (Ralink Technology, Corp.,11/15/2007, 1.01.00.0000) loaded [ 39.212850] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 39.215826] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 39.218415] ndiswrapper: using IRQ 16 [ 39.280318] wlan0: ethernet device 00:15:af:91:7f:da using serialized NDIS driver: rt2860, version: 0x0, NDIS version: 0x500, vendor: 'IEEE 802.11n Wireless Card.', 1814:0781.5.conf [ 39.280339] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 39.283135] usbcore: registered new interface driver ndiswrapper [ 39.386882] Adding 3895688k swap on /dev/sda6. Priority:-1 extents:1 across:3895688k [ 39.940338] EXT3 FS on sda1, internal journal [ 40.124044] device-mapper: uevent: version 1.0.3 [ 40.124073] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 41.239109] kjournald starting. Commit interval 5 seconds [ 41.239447] EXT3 FS on sda3, internal journal [ 41.239451] EXT3-fs: mounted filesystem with ordered data mode. [ 41.299345] kjournald starting. Commit interval 5 seconds [ 41.299635] EXT3 FS on sda4, internal journal [ 41.299638] EXT3-fs: mounted filesystem with ordered data mode. [ 41.817217] ip_tables: (C) 2000-2006 Netfilter Core Team [ 42.397394] No dock devices found. [ 44.173321] apm: BIOS not found. [ 44.874903] ppdev: user-space parallel port driver [ 45.938649] audit(1207911491.445:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5377 profile="/usr/sbin/cupsd" namespace="default" [ 49.751150] Bluetooth: L2CAP ver 2.9 [ 49.751156] Bluetooth: L2CAP socket layer initialized [ 49.892399] Bluetooth: RFCOMM socket layer initialized [ 49.892416] Bluetooth: RFCOMM TTY layer initialized [ 49.892419] Bluetooth: RFCOMM ver 1.8 [ 54.923475] r8169: eth0: link down [ 55.278566] NET: Registered protocol family 17 [ 80.712916] NET: Registered protocol family 10 [ 80.713316] lo: Disabled Privacy Extensions [ 80.713710] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 89.462056] wlan0: no IPv6 routers present [ 300.718059] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 300.727265] usb 4-1: configuration #1 chosen from 1 choice [ 300.838246] lirc_dev: IR Remote Control driver registered, at major 61 [ 300.845693] [ 300.845694] lirc_atiusb: USB remote driver for LIRC $Revision: 1.61 $ [ 300.845698] lirc_atiusb: Paul Miller [ 300.848492] lirc_dev: lirc_register_plugin: sample_rate: 0 [ 300.851521] lirc_atiusb[2]: X10 WTI RF receiver on usb4:2 [ 300.854149] usbcore: registered new interface driver lirc_atiusb [ 300.879737] usbcore: registered new interface driver ati_remote [ 300.880224] /build/buildd/linux-2.6.24/drivers/input/misc/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1