[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 15:10:52 UTC 2008 (Ubuntu 2.6.24-19.33-generic) [ 0.000000] Command line: root=/dev/md0 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffd0000 (usable) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000cffde000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffde000 - 00000000d0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851920) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used [ 0.000000] end_pfn_map = 2293760 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F9830 checksum 0 [ 0.000000] ACPI: RSDP 000F9830, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFD0000, 0034 (r1 A M I OEMRSDT 5000615 MSFT 97) [ 0.000000] ACPI: FACP CFFD0200, 0084 (r2 A M I OEMFACP 5000615 MSFT 97) [ 0.000000] ACPI: DSDT CFFD0440, 61F0 (r1 1ADGH 1ADGH004 4 INTL 20051117) [ 0.000000] ACPI: FACS CFFDE000, 0040 [ 0.000000] ACPI: APIC CFFD0390, 0070 (r1 A M I OEMAPIC 5000615 MSFT 97) [ 0.000000] ACPI: MCFG CFFD0400, 003C (r1 A M I OEMMCFG 5000615 MSFT 97) [ 0.000000] ACPI: OEMB CFFDE040, 0060 (r1 A M I AMI_OEM 5000615 MSFT 97) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 1 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851920) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 2293760 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851920 [ 0.000000] 0: 1048576 -> 2293760 [ 0.000000] On node 0 totalpages: 2097007 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1226 pages reserved [ 0.000000] DMA zone: 2717 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833544 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cffd0000 - 00000000cffde000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cffde000 - 00000000d0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fef00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 00000000ff780000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff780000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064421 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 22.126523] time.c: Detected 2010.296 MHz processor. [ 22.128716] Console: colour VGA+ 80x25 [ 22.128719] console [tty0] enabled [ 22.128735] Checking aperture... [ 22.128737] CPU 0: aperture @ 4000000 size 32 MB [ 22.128739] Aperture too small (32 MB) [ 22.133414] No AGP bridge found [ 22.133416] Your BIOS doesn't leave a aperture memory hole [ 22.133417] Please enable the IOMMU option in the BIOS setup [ 22.133419] This costs you 64 MB of RAM [ 22.157313] Mapping aperture over 65536 KB of RAM @ 4000000 [ 22.157317] swsusp: Registered nosave memory region: 0000000004000000 - 0000000008000000 [ 22.220913] Memory: 8184220k/9175040k available (2489k kernel code, 203808k reserved, 1318k data, 320k init) [ 22.220942] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 22.300391] Calibrating delay using timer specific routine.. 4023.98 BogoMIPS (lpj=8047975) [ 22.300416] Security Framework initialized [ 22.300420] SELinux: Disabled at boot. [ 22.300432] AppArmor: AppArmor initialized [ 22.300435] Failure registering capabilities with primary security module. [ 22.301073] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 22.305186] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 22.307092] Mount-cache hash table entries: 256 [ 22.307195] Initializing cgroup subsys ns [ 22.307198] Initializing cgroup subsys cpuacct [ 22.307209] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.307211] CPU: L2 Cache: 512K (64 bytes/line) [ 22.307213] CPU 0/0 -> Node 0 [ 22.307232] SMP alternatives: switching to UP code [ 22.307728] Early unpacking initramfs... done [ 22.591976] ACPI: Core revision 20070126 [ 22.592035] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 22.636061] Using local APIC timer interrupts. [ 22.685772] APIC timer calibration result 12564344 [ 22.685774] Detected 12.564 MHz APIC timer. [ 22.685824] Brought up 1 CPUs [ 22.685918] CPU0 attaching sched-domain: [ 22.685920] domain 0: span 01 [ 22.685921] groups: 01 [ 22.686055] net_namespace: 120 bytes [ 22.686436] Time: 19:31:20 Date: 06/17/08 [ 22.686464] NET: Registered protocol family 16 [ 22.686632] ACPI: bus type pci registered [ 22.686697] PCI: Using configuration type 1 [ 22.691252] ACPI: EC: Look up EC in DSDT [ 22.698428] ACPI: Interpreter enabled [ 22.698431] ACPI: (supports S0 S1 S3 S4 S5) [ 22.698448] ACPI: Using IOAPIC for interrupt routing [ 22.698684] Error attaching device data [ 22.698689] Error attaching device data [ 22.708936] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.709494] PCI: Transparent bridge - 0000:00:06.0 [ 22.709775] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.710104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 22.710301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 22.710408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 22.710517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 22.710625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 22.710732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 22.721108] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 22.721339] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 22.721567] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 22.721798] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 22.722025] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 22.722252] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 22.722478] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 22.722704] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 22.722931] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 22.723158] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *10 [ 22.723384] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 22.723614] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5 [ 22.723841] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 22.724068] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 22.724301] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 [ 22.724529] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 22.724761] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 [ 22.725036] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 22.725264] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10 [ 22.725381] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 82, should be 7B [20070126] [ 22.725387] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.725413] pnp: PnP ACPI init [ 22.725420] ACPI: bus type pnp registered [ 22.731544] pnp: PnP ACPI: found 14 devices [ 22.731546] ACPI: ACPI bus type pnp unregistered [ 22.731748] PCI: Using ACPI for IRQ routing [ 22.731751] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.745760] NET: Registered protocol family 8 [ 22.745762] NET: Registered protocol family 20 [ 22.745826] PCI-DMA: Disabling AGP. [ 22.745972] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 22.745975] PCI-DMA: using GART IOMMU. [ 22.745982] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 22.746159] AppArmor: AppArmor Filesystem Enabled [ 22.749743] Time: tsc clocksource has been installed. [ 22.757809] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 22.757811] system 00:08: ioport range 0x800-0x80f has been reserved [ 22.757814] system 00:08: ioport range 0x2000-0x207f has been reserved [ 22.757816] system 00:08: ioport range 0x2080-0x20ff has been reserved [ 22.757818] system 00:08: ioport range 0x2400-0x247f has been reserved [ 22.757821] system 00:08: ioport range 0x2480-0x24ff has been reserved [ 22.757823] system 00:08: ioport range 0x2800-0x287f has been reserved [ 22.757825] system 00:08: ioport range 0x2880-0x28ff has been reserved [ 22.757828] system 00:08: ioport range 0x2c00-0x2c7f has been reserved [ 22.757830] system 00:08: ioport range 0x2c80-0x2cff has been reserved [ 22.757833] system 00:08: iomem range 0xfbf80000-0xfbfbffff has been reserved [ 22.757836] system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved [ 22.757842] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 22.757845] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 22.757851] system 00:0b: ioport range 0xa00-0xa0f has been reserved [ 22.757853] system 00:0b: ioport range 0xa10-0xa1f has been reserved [ 22.757859] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 22.757865] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 22.757867] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 22.757869] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 22.757872] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved [ 22.757874] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 22.758231] PCI: Bridge: 0000:00:06.0 [ 22.758233] IO window: disabled. [ 22.758235] MEM window: disabled. [ 22.758237] PREFETCH window: disabled. [ 22.758239] PCI: Bridge: 0000:00:0b.0 [ 22.758240] IO window: disabled. [ 22.758242] MEM window: disabled. [ 22.758244] PREFETCH window: disabled. [ 22.758246] PCI: Bridge: 0000:00:0c.0 [ 22.758247] IO window: disabled. [ 22.758249] MEM window: disabled. [ 22.758251] PREFETCH window: disabled. [ 22.758253] PCI: Bridge: 0000:00:0d.0 [ 22.758254] IO window: disabled. [ 22.758256] MEM window: disabled. [ 22.758258] PREFETCH window: disabled. [ 22.758260] PCI: Bridge: 0000:00:0e.0 [ 22.758261] IO window: disabled. [ 22.758263] MEM window: disabled. [ 22.758265] PREFETCH window: disabled. [ 22.758267] PCI: Bridge: 0000:00:0f.0 [ 22.758268] IO window: disabled. [ 22.758270] MEM window: fc000000-febfffff [ 22.758273] PREFETCH window: d0000000-dfffffff [ 22.758280] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 22.758289] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 22.758295] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 22.758301] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 22.758306] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 22.758312] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 22.758360] NET: Registered protocol family 2 [ 22.793950] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 22.795636] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 22.799569] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 22.800066] TCP: Hash tables configured (established 524288 bind 65536) [ 22.800069] TCP reno registered [ 22.809823] checking if image is initramfs... it is [ 23.261366] Switched to high resolution mode on CPU 0 [ 23.429719] Freeing initrd memory: 7572k freed [ 23.433989] audit: initializing netlink socket (disabled) [ 23.433998] audit(1213731080.268:1): initialized [ 23.435929] VFS: Disk quotas dquot_6.5.1 [ 23.436000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 23.436107] io scheduler noop registered [ 23.436109] io scheduler anticipatory registered [ 23.436111] io scheduler deadline registered [ 23.436197] io scheduler cfq registered (default) [ 23.436220] pci 0000:00:00.0: Enabling HT MSI Mapping [ 23.436530] pci 0000:00:05.0: Enabling HT MSI Mapping [ 23.436544] pci 0000:00:05.1: Enabling HT MSI Mapping [ 23.436555] pci 0000:00:05.2: Enabling HT MSI Mapping [ 23.436564] pci 0000:00:06.0: Enabling HT MSI Mapping [ 23.436576] pci 0000:00:06.1: Enabling HT MSI Mapping [ 23.436589] pci 0000:00:08.0: Enabling HT MSI Mapping [ 23.436602] pci 0000:00:09.0: Enabling HT MSI Mapping [ 23.436612] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 23.436624] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 23.436635] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 23.436646] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 23.436657] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 23.436673] Boot video device is 0000:06:00.0 [ 23.436804] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 23.436823] assign_interrupt_mode Found MSI capability [ 23.436840] Allocate Port Service[0000:00:0b.0:pcie00] [ 23.436894] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 23.436913] assign_interrupt_mode Found MSI capability [ 23.436927] Allocate Port Service[0000:00:0c.0:pcie00] [ 23.436974] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 23.436992] assign_interrupt_mode Found MSI capability [ 23.437006] Allocate Port Service[0000:00:0d.0:pcie00] [ 23.437056] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 23.437075] assign_interrupt_mode Found MSI capability [ 23.437088] Allocate Port Service[0000:00:0e.0:pcie00] [ 23.437136] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 23.437154] assign_interrupt_mode Found MSI capability [ 23.437168] Allocate Port Service[0000:00:0f.0:pcie00] [ 23.460607] Real Time Clock Driver v1.12ac [ 23.460686] Linux agpgart interface v0.102 [ 23.460688] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.460797] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.460913] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 23.461653] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.462292] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 23.462353] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 23.462427] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 23.462430] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 23.462929] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.473243] mice: PS/2 mouse device common for all mice [ 23.473273] cpuidle: using governor ladder [ 23.473275] cpuidle: using governor menu [ 23.473395] NET: Registered protocol family 1 [ 23.473475] registered taskstats version 1 [ 23.473595] Magic number: 12:769:546 [ 23.473678] hash matches device null [ 23.473698] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 23.473700] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 23.473702] EDD information not available. [ 23.473708] Freeing unused kernel memory: 320k freed [ 23.609577] fuse init (API version 7.9) [ 23.625375] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 23.639661] md: linear personality registered for level -1 [ 23.643213] md: multipath personality registered for level -4 [ 23.646648] md: raid0 personality registered for level 0 [ 23.650582] md: raid1 personality registered for level 1 [ 23.653952] xor: automatically using best checksumming function: generic_sse [ 23.672999] generic_sse: 6198.000 MB/sec [ 23.673001] xor: using function: generic_sse (6198.000 MB/sec) [ 23.673508] async_tx: api initialized (async) [ 23.740971] raid6: int64x1 1988 MB/s [ 23.808908] raid6: int64x2 2454 MB/s [ 23.876857] raid6: int64x4 2570 MB/s [ 23.944805] raid6: int64x8 1996 MB/s [ 24.012737] raid6: sse2x1 2810 MB/s [ 24.080674] raid6: sse2x2 3749 MB/s [ 24.148629] raid6: sse2x4 3927 MB/s [ 24.148630] raid6: using algorithm sse2x4 (3927 MB/s) [ 24.148633] md: raid6 personality registered for level 6 [ 24.148634] md: raid5 personality registered for level 5 [ 24.148636] md: raid4 personality registered for level 4 [ 24.171241] md: raid10 personality registered for level 10 [ 24.720219] usbcore: registered new interface driver usbfs [ 24.720237] usbcore: registered new interface driver hub [ 24.724361] SCSI subsystem initialized [ 24.740751] usbcore: registered new device driver usb [ 24.768531] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 [ 24.768540] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23 [ 24.768610] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 24.768615] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 24.768785] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 24.768819] ehci_hcd 0000:00:02.1: debug port 1 [ 24.768822] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 24.768833] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbffac00 [ 24.772233] libata version 3.00 loaded. [ 24.776731] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 24.780148] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.780253] usb usb1: configuration #1 chosen from 1 choice [ 24.780273] hub 1-0:1.0: USB hub found [ 24.780280] hub 1-0:1.0: 10 ports detected [ 24.884529] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 [ 24.884538] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22 [ 24.884608] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 24.884614] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 24.884669] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 24.884688] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbffb000 [ 24.942101] usb usb2: configuration #1 chosen from 1 choice [ 24.942123] hub 2-0:1.0: USB hub found [ 24.942132] hub 2-0:1.0: 10 ports detected [ 25.044100] pata_amd 0000:00:04.0: version 0.3.10 [ 25.044142] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 25.044979] scsi0 : pata_amd [ 25.045645] scsi1 : pata_amd [ 25.046513] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 25.046515] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 25.210752] ata2: port disabled. ignoring. [ 25.211559] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 25.211568] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 25.211597] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 25.211607] ACPI: PCI interrupt for device 0000:00:05.0 disabled [ 25.211938] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 [ 25.211944] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20 [ 25.212242] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 25.212252] ACPI: PCI interrupt for device 0000:00:05.1 disabled [ 25.212572] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 23 [ 25.212575] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 23 (level, low) -> IRQ 23 [ 25.212590] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 25.212597] ACPI: PCI interrupt for device 0000:00:05.2 disabled [ 25.214178] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 25.214504] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 25.214507] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 25.214512] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 25.427638] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 25.639567] usb 2-2: configuration #1 chosen from 1 choice [ 25.736833] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:6f:c2:3c [ 25.736837] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 25.737200] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 21 [ 25.737203] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 21 [ 25.737209] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 26.256412] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:16:17:6f:a4:e2 [ 26.256417] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 26.259612] sata_nv 0000:00:05.0: version 3.5 [ 26.259623] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 26.259627] sata_nv 0000:00:05.0: Using SWNCQ mode [ 26.259727] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 26.261717] scsi2 : sata_nv [ 26.262346] scsi3 : sata_nv [ 26.262508] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 21 [ 26.262511] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 21 [ 26.726576] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 26.734730] ata3.00: ATA-7: SAMSUNG HD250HJ, FH100-05, max UDMA7 [ 26.734733] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 26.742729] ata3.00: configured for UDMA/133 [ 27.210188] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.218339] ata4.00: ATA-7: SAMSUNG HD250HJ, FH100-05, max UDMA7 [ 27.218342] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 27.226334] ata4.00: configured for UDMA/133 [ 27.226417] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5 [ 27.226763] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5 [ 27.226812] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20 [ 27.226816] sata_nv 0000:00:05.1: Using SWNCQ mode [ 27.226910] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 27.227297] scsi4 : sata_nv [ 27.227447] scsi5 : sata_nv [ 27.227595] ata5: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 20 [ 27.227598] ata6: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 20 [ 27.693802] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.701955] ata5.00: ATA-7: SAMSUNG HD250HJ, FH100-05, max UDMA7 [ 27.701957] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 27.709947] ata5.00: configured for UDMA/133 [ 28.177414] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 28.185567] ata6.00: ATA-7: SAMSUNG HD250HJ, FH100-05, max UDMA7 [ 28.185569] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 28.193562] ata6.00: configured for UDMA/133 [ 28.193640] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5 [ 28.194000] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5 [ 28.194049] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 23 (level, low) -> IRQ 23 [ 28.194054] sata_nv 0000:00:05.2: Using SWNCQ mode [ 28.194153] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 28.194552] scsi6 : sata_nv [ 28.194710] scsi7 : sata_nv [ 28.194857] ata7: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 23 [ 28.194859] ata8: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 23 [ 28.661028] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 28.669188] ata7.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133 [ 28.669190] ata7.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 28.685182] ata7.00: configured for UDMA/133 [ 29.152633] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 29.160787] ata8.00: ATA-7: SAMSUNG HD250HJ, FH100-05, max UDMA7 [ 29.160790] ata8.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 29.168782] ata8.00: configured for UDMA/133 [ 29.168863] scsi 6:0:0:0: Direct-Access ATA ST3250310AS 3.AA PQ: 0 ANSI: 5 [ 29.169243] scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5 [ 29.177610] Driver 'sd' needs updating - please use bus_type methods [ 29.177676] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 29.177685] sd 2:0:0:0: [sda] Write Protect is off [ 29.177688] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.177701] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.177737] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 29.177744] sd 2:0:0:0: [sda] Write Protect is off [ 29.177746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.177759] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.177762] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 29.239534] sd 2:0:0:0: [sda] Attached SCSI disk [ 29.239577] sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 29.239586] sd 3:0:0:0: [sdb] Write Protect is off [ 29.239588] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 29.239602] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.239637] sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 29.239645] sd 3:0:0:0: [sdb] Write Protect is off [ 29.239647] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 29.239660] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.239664] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 > [ 29.305448] sd 3:0:0:0: [sdb] Attached SCSI disk [ 29.306659] sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) [ 29.306669] sd 4:0:0:0: [sdc] Write Protect is off [ 29.306671] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 29.306684] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.306721] sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) [ 29.306728] sd 4:0:0:0: [sdc] Write Protect is off [ 29.306730] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 29.306743] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.306746] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 > [ 29.367634] sd 4:0:0:0: [sdc] Attached SCSI disk [ 29.369049] sd 5:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB) [ 29.369059] sd 5:0:0:0: [sdd] Write Protect is off [ 29.369061] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 29.369074] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.369111] sd 5:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB) [ 29.369119] sd 5:0:0:0: [sdd] Write Protect is off [ 29.369121] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 29.369133] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.369137] sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 > [ 29.431038] sd 5:0:0:0: [sdd] Attached SCSI disk [ 29.431072] sd 6:0:0:0: [sde] 488397168 512-byte hardware sectors (250059 MB) [ 29.431080] sd 6:0:0:0: [sde] Write Protect is off [ 29.431082] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 29.431095] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.431123] sd 6:0:0:0: [sde] 488397168 512-byte hardware sectors (250059 MB) [ 29.431131] sd 6:0:0:0: [sde] Write Protect is off [ 29.431133] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 29.431146] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.431149] sde: sde1 sde2 < sde5 sde6 sde7 sde8 sde9 sde10 > [ 29.485760] sd 6:0:0:0: [sde] Attached SCSI disk [ 29.487801] sd 7:0:0:0: [sdf] 488397168 512-byte hardware sectors (250059 MB) [ 29.487811] sd 7:0:0:0: [sdf] Write Protect is off [ 29.487813] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 29.487827] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.487863] sd 7:0:0:0: [sdf] 488397168 512-byte hardware sectors (250059 MB) [ 29.487871] sd 7:0:0:0: [sdf] Write Protect is off [ 29.487873] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 29.487886] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.487890] sdf: sdf1 sdf2 < sdf5 sdf6 sdf7 sdf8 sdf9 sdf10 > [ 29.548623] sd 7:0:0:0: [sdf] Attached SCSI disk [ 29.568101] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 29.568117] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 29.568132] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 29.568147] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 29.568161] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 29.568176] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 30.051060] md: md0 stopped. [ 30.128941] md: bind [ 30.129072] md: bind [ 30.129195] md: bind [ 30.129334] md: bind [ 30.129459] md: bind [ 30.129580] md: bind [ 30.138131] raid1: raid set md0 active with 6 out of 6 mirrors [ 30.138254] md: md1 stopped. [ 30.274659] md: bind [ 30.274819] md: bind [ 30.274953] md: bind [ 30.281519] md: bind [ 30.283851] md: bind [ 30.283977] md: bind [ 30.292924] raid5: device sda5 operational as raid disk 0 [ 30.292932] raid5: device sdf5 operational as raid disk 5 [ 30.292934] raid5: device sde5 operational as raid disk 4 [ 30.292935] raid5: device sdd5 operational as raid disk 3 [ 30.292937] raid5: device sdc5 operational as raid disk 2 [ 30.292939] raid5: device sdb5 operational as raid disk 1 [ 30.293569] raid5: allocated 6374kB for md1 [ 30.293573] raid5: raid level 5 set md1 active with 6 out of 6 devices, algorithm 2 [ 30.293575] RAID5 conf printout: [ 30.293577] --- rd:6 wd:6 [ 30.293579] disk 0, o:1, dev:sda5 [ 30.293580] disk 1, o:1, dev:sdb5 [ 30.293582] disk 2, o:1, dev:sdc5 [ 30.293584] disk 3, o:1, dev:sdd5 [ 30.293586] disk 4, o:1, dev:sde5 [ 30.293587] disk 5, o:1, dev:sdf5 [ 30.293714] md: md6 stopped. [ 30.419599] Attempting manual resume [ 30.419602] swsusp: Resume From Partition 8:9 [ 30.419604] PM: Checking swsusp image. [ 30.419750] PM: Resume from disk failed. [ 30.420712] md: bind [ 30.420854] md: bind [ 30.420991] md: bind [ 30.421131] md: bind [ 30.421319] md: bind [ 30.421455] md: bind [ 30.434581] raid5: device sda6 operational as raid disk 0 [ 30.434585] raid5: device sde6 operational as raid disk 5 [ 30.434587] raid5: device sdf6 operational as raid disk 4 [ 30.434588] raid5: device sdd6 operational as raid disk 3 [ 30.434590] raid5: device sdc6 operational as raid disk 2 [ 30.434592] raid5: device sdb6 operational as raid disk 1 [ 30.435136] raid5: allocated 6374kB for md6 [ 30.435139] raid5: raid level 5 set md6 active with 6 out of 6 devices, algorithm 2 [ 30.435141] RAID5 conf printout: [ 30.435142] --- rd:6 wd:6 [ 30.435144] disk 0, o:1, dev:sda6 [ 30.435145] disk 1, o:1, dev:sdb6 [ 30.435147] disk 2, o:1, dev:sdc6 [ 30.435148] disk 3, o:1, dev:sdd6 [ 30.435149] disk 4, o:1, dev:sdf6 [ 30.435151] disk 5, o:1, dev:sde6 [ 30.435289] md: md3 stopped. [ 30.452877] md: bind [ 30.453019] md: bind [ 30.453154] md: bind [ 30.453292] md: bind [ 30.453428] md: bind [ 30.453559] md: bind [ 30.468775] raid5: device sda7 operational as raid disk 0 [ 30.468779] raid5: device sdf7 operational as raid disk 5 [ 30.468781] raid5: device sde7 operational as raid disk 4 [ 30.468782] raid5: device sdd7 operational as raid disk 3 [ 30.468784] raid5: device sdc7 operational as raid disk 2 [ 30.468786] raid5: device sdb7 operational as raid disk 1 [ 30.470013] raid5: allocated 6374kB for md3 [ 30.470017] raid5: raid level 5 set md3 active with 6 out of 6 devices, algorithm 2 [ 30.470018] RAID5 conf printout: [ 30.470020] --- rd:6 wd:6 [ 30.470022] disk 0, o:1, dev:sda7 [ 30.470023] disk 1, o:1, dev:sdb7 [ 30.470025] disk 2, o:1, dev:sdc7 [ 30.470027] disk 3, o:1, dev:sdd7 [ 30.470028] disk 4, o:1, dev:sde7 [ 30.470030] disk 5, o:1, dev:sdf7 [ 30.470162] md: md4 stopped. [ 30.487930] kjournald starting. Commit interval 5 seconds [ 30.487944] EXT3-fs: mounted filesystem with ordered data mode. [ 30.505428] md: bind [ 30.505571] md: bind [ 30.505707] md: bind [ 30.505858] md: bind [ 30.506000] md: bind [ 30.506089] md: md5 stopped. [ 30.513525] md: bind [ 30.513679] md: bind [ 30.513824] md: bind [ 30.513954] md: bind [ 30.514093] md: bind [ 30.558792] md: md4 stopped. [ 30.558803] md: unbind [ 30.558807] md: export_rdev(sda8) [ 30.558814] md: unbind [ 30.558817] md: export_rdev(sde8) [ 30.558821] md: unbind [ 30.558824] md: export_rdev(sdd8) [ 30.558829] md: unbind [ 30.558832] md: export_rdev(sdc8) [ 30.558836] md: unbind [ 30.558839] md: export_rdev(sdb8) [ 30.579843] attempt to access beyond end of device [ 30.579848] sda2: rw=16, want=18446744073709551496, limit=2 [ 30.579851] md: disabled device sda2, could not read superblock. [ 30.579854] md: sda2 does not have a valid v0.90 superblock, not importing! [ 30.579857] md: md_import_device returned -22 [ 30.579881] attempt to access beyond end of device [ 30.579883] sda2: rw=16, want=18446744073709551496, limit=2 [ 30.579886] md: disabled device sda2, could not read superblock. [ 30.579888] md: sda2 does not have a valid v0.90 superblock, not importing! [ 30.579891] md: md_import_device returned -22 [ 30.579897] attempt to access beyond end of device [ 30.579899] sda2: rw=16, want=18446744073709551496, limit=2 [ 30.579901] md: disabled device sda2, could not read superblock. [ 30.579904] md: sda2 does not have a valid v0.90 superblock, not importing! [ 30.579906] md: md_import_device returned -22 [ 30.579912] attempt to access beyond end of device [ 30.579914] sda2: rw=16, want=18446744073709551496, limit=2 [ 30.579916] md: disabled device sda2, could not read superblock. [ 30.579919] md: sda2 does not have a valid v0.90 superblock, not importing! [ 30.579921] md: md_import_device returned -22 [ 30.579926] attempt to access beyond end of device [ 30.579929] sda2: rw=16, want=18446744073709551496, limit=2 [ 30.579931] md: disabled device sda2, could not read superblock. [ 30.579933] md: sda2 does not have a valid v0.90 superblock, not importing! [ 30.579936] md: md_import_device returned -22 [ 30.579941] attempt to access beyond end of device [ 30.579944] sda2: rw=16, want=18446744073709551496, limit=2 [ 30.579946] md: disabled device sda2, could not read superblock. [ 30.579948] md: sda2 does not have a valid v0.90 superblock, not importing! [ 30.579951] md: md_import_device returned -22 [ 30.579983] md: md5 stopped. [ 30.579992] md: unbind [ 30.579995] md: export_rdev(sda10) [ 30.580000] md: unbind [ 30.580003] md: export_rdev(sde10) [ 30.580008] md: unbind [ 30.580010] md: export_rdev(sdd10) [ 30.580014] md: unbind [ 30.580017] md: export_rdev(sdc10) [ 30.580021] md: unbind [ 30.580023] md: export_rdev(sdb10) [ 36.582867] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 36.646661] irda_init() [ 36.646676] NET: Registered protocol family 23 [ 36.726653] parport_pc 00:07: reported by Plug and Play ACPI [ 36.726697] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 36.830519] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 36.882510] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.176135] input: Power Button (FF) as /devices/virtual/input/input2 [ 37.206225] ACPI: Power Button (FF) [PWRF] [ 37.206286] input: Power Button (CM) as /devices/virtual/input/input3 [ 37.222251] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 37.222268] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 [ 37.241767] ACPI: Power Button (CM) [PWRB] [ 38.016677] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 38.016681] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20 [ 38.016758] PCI: Setting latency timer of device 0000:00:06.1 to 64 [ 38.521223] md: md4 stopped. [ 38.700931] md: bind [ 38.701115] md: bind [ 38.701288] md: bind [ 38.701457] md: bind [ 38.701631] md: bind [ 38.701801] md: bind [ 38.941302] raid5: device sda8 operational as raid disk 0 [ 38.941306] raid5: device sdf8 operational as raid disk 5 [ 38.941308] raid5: device sde8 operational as raid disk 4 [ 38.941310] raid5: device sdd8 operational as raid disk 3 [ 38.941311] raid5: device sdc8 operational as raid disk 2 [ 38.941313] raid5: device sdb8 operational as raid disk 1 [ 38.954926] raid5: allocated 6374kB for md4 [ 38.954930] raid5: raid level 5 set md4 active with 6 out of 6 devices, algorithm 2 [ 38.954932] RAID5 conf printout: [ 38.954934] --- rd:6 wd:6 [ 38.954935] disk 0, o:1, dev:sda8 [ 38.954937] disk 1, o:1, dev:sdb8 [ 38.954939] disk 2, o:1, dev:sdc8 [ 38.954940] disk 3, o:1, dev:sdd8 [ 38.954942] disk 4, o:1, dev:sde8 [ 38.954944] disk 5, o:1, dev:sdf8 [ 38.955038] md: md5 stopped. [ 39.036385] md: bind [ 39.036574] md: bind [ 39.036754] md: bind [ 39.036932] md: bind [ 39.037056] md: bind [ 39.037234] md: bind [ 39.189210] raid5: device sda10 operational as raid disk 0 [ 39.189214] raid5: device sde10 operational as raid disk 5 [ 39.189216] raid5: device sdf10 operational as raid disk 4 [ 39.189218] raid5: device sdd10 operational as raid disk 3 [ 39.189219] raid5: device sdc10 operational as raid disk 2 [ 39.189221] raid5: device sdb10 operational as raid disk 1 [ 39.213894] raid5: allocated 6374kB for md5 [ 39.213898] raid5: raid level 5 set md5 active with 6 out of 6 devices, algorithm 2 [ 39.213900] RAID5 conf printout: [ 39.213901] --- rd:6 wd:6 [ 39.213903] disk 0, o:1, dev:sda10 [ 39.213905] disk 1, o:1, dev:sdb10 [ 39.213907] disk 2, o:1, dev:sdc10 [ 39.213908] disk 3, o:1, dev:sdd10 [ 39.213910] disk 4, o:1, dev:sdf10 [ 39.213911] disk 5, o:1, dev:sde10 [ 39.427250] [ueagle-atm] driver ueagle 1.4 loaded [ 39.427280] usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9021) Rev (0X500B): Eagle II [ 39.600345] usb 2-2: reset full speed USB device using ohci_hcd and address 2 [ 39.874064] usb 2-2: [ueagle-atm] using iso mode [ 39.875974] usb 2-2: [ueagle-atm] (re)booting started [ 39.878012] usbcore: registered new interface driver ueagle-atm [ 41.461853] loop: module loaded [ 41.493103] lp0: using parport0 (interrupt-driven). [ 41.601426] w83627ehf: Found W83627EHG chip at 0xa10 [ 41.726597] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [ 41.728129] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [ 41.737359] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [ 41.787547] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [ 41.877130] Adding 979924k swap on /dev/sda9. Priority:-1 extents:1 across:979924k [ 41.893647] Adding 979924k swap on /dev/sdb9. Priority:-2 extents:1 across:979924k [ 41.907314] Adding 979924k swap on /dev/sdc9. Priority:-3 extents:1 across:979924k [ 41.920563] Adding 979924k swap on /dev/sdd9. Priority:-4 extents:1 across:979924k [ 41.929842] Adding 979924k swap on /dev/sdf9. Priority:-5 extents:1 across:979924k [ 41.961776] Adding 979924k swap on /dev/sde9. Priority:-6 extents:1 across:979924k [ 42.224269] EXT3 FS on md0, internal journal [ 43.970958] kjournald starting. Commit interval 5 seconds [ 44.008883] EXT3 FS on md1, internal journal [ 44.008887] EXT3-fs: mounted filesystem with ordered data mode. [ 44.027318] kjournald starting. Commit interval 5 seconds [ 44.048327] EXT3 FS on md6, internal journal [ 44.048330] EXT3-fs: mounted filesystem with ordered data mode. [ 44.051324] kjournald starting. Commit interval 5 seconds [ 44.088788] EXT3 FS on md3, internal journal [ 44.088791] EXT3-fs: mounted filesystem with ordered data mode. [ 44.134527] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 44.136430] SGI XFS Quota Management subsystem [ 44.142468] Filesystem "md5": Disabling barriers, not supported by the underlying device [ 44.163759] XFS mounting filesystem md5 [ 45.310691] Ending clean XFS mount for filesystem: md5 [ 45.366021] kjournald starting. Commit interval 5 seconds [ 45.419790] EXT3 FS on md4, internal journal [ 45.419794] EXT3-fs: mounted filesystem with ordered data mode. [ 47.220211] ip_tables: (C) 2000-2006 Netfilter Core Team [ 56.790541] usb 2-2: [ueagle-atm] modem operational [ 140.951953] Netfilter messages via NETLINK v0.30. [ 140.977246] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 141.097779] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 141.242574] NET: Registered protocol family 10 [ 141.242814] lo: Disabled Privacy Extensions [ 141.267883] ctnetlink v0.93: registering with nfnetlink. [ 141.442182] ClusterIP Version 0.8 loaded successfully [ 146.293535] RPC: Registered udp transport module. [ 146.293538] RPC: Registered tcp transport module. [ 148.047738] No dock devices found. [ 151.046854] ppdev: user-space parallel port driver [ 151.488495] audit(1213731209.255:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=7919 profile="/usr/sbin/cupsd" namespace="default" [ 152.218290] eth0: no IPv6 routers present [ 163.391451] PPP generic driver version 2.4.2 [ 166.715091] NET: Registered protocol family 17 [ 166.889819] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 167.057690] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 167.072877] NFSD: starting 90-second grace period [ 171.908228] NET: Registered protocol family 24 [ 174.752281] nas0: no IPv6 routers present [ 2514.533854] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [ 2514.533860] usb 2-2: [ueagle-atm] (re)booting started [ 2516.290520] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [ 2516.291956] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [ 2516.294215] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [ 2516.344478] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [ 2527.341193] usb 2-2: [ueagle-atm] modem operational [ 6128.230888] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [ 6128.230894] usb 2-2: [ueagle-atm] (re)booting started [ 6129.987555] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [ 6129.988988] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [ 6129.991298] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [ 6130.041512] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [ 6143.039724] usb 2-2: [ueagle-atm] modem operational [ 6408.103181] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [ 6408.103187] usb 2-2: [ueagle-atm] (re)booting started [ 6409.835859] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [ 6409.837390] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [ 6409.839723] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [ 6409.889817] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [ 6420.925451] usb 2-2: [ueagle-atm] modem operational [ 6799.501990] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [ 6799.501996] usb 2-2: [ueagle-atm] (re)booting started [ 6801.259657] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [ 6801.261087] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [ 6801.263390] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [ 6801.313616] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [ 6816.306323] usb 2-2: [ueagle-atm] modem operational [ 8112.013641] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [ 8112.013647] usb 2-2: [ueagle-atm] (re)booting started [ 8113.769302] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [ 8113.770714] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [ 8113.772972] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [ 8113.823261] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [ 8126.870435] usb 2-2: [ueagle-atm] modem operational [ 8870.671301] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [ 8870.671306] usb 2-2: [ueagle-atm] (re)booting started [ 8872.403973] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [ 8872.405380] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [ 8872.407694] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [ 8872.457932] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [ 8883.470612] usb 2-2: [ueagle-atm] modem operational [13249.384231] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [13249.384237] usb 2-2: [ueagle-atm] (re)booting started [13251.137900] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [13251.139293] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [13251.141526] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [13251.191860] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [13263.230792] usb 2-2: [ueagle-atm] modem operational [22904.605136] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [22904.605142] usb 2-2: [ueagle-atm] (re)booting started [22906.361815] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [22906.363216] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [22906.365533] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [22906.415774] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [22921.409566] usb 2-2: [ueagle-atm] modem operational [39451.931304] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [39451.931310] usb 2-2: [ueagle-atm] (re)booting started [39453.687968] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [39453.689424] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [39453.692362] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [39453.742929] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [39465.764995] usb 2-2: [ueagle-atm] modem operational [42514.200597] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [42514.200603] usb 2-2: [ueagle-atm] (re)booting started [42515.958301] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [42515.959929] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [42515.969991] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [42516.020253] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [42527.142905] usb 2-2: [ueagle-atm] modem operational [44215.321456] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [44215.321462] usb 2-2: [ueagle-atm] (re)booting started [44217.077163] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [44217.078767] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [44217.091052] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [44217.141113] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [44228.168910] usb 2-2: [ueagle-atm] modem operational [49990.403210] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [49990.403216] usb 2-2: [ueagle-atm] (re)booting started [49992.157921] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [49992.159353] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [49992.161984] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [49992.212837] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [50005.264152] usb 2-2: [ueagle-atm] modem operational [56072.118819] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp) [56072.118825] usb 2-2: [ueagle-atm] (re)booting started [56073.859505] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [56073.860945] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [56073.863282] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [56073.913462] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [56088.914355] usb 2-2: [ueagle-atm] modem operational [69919.423025] ata3: EH in SWNCQ mode,QC:qc_active 0x3FF sactive 0x3FF [69919.423060] ata3: SWNCQ:qc_active 0x3 defer_bits 0x3FC last_issue_tag 0x1 [69919.423061] dhfis 0x3 dmafis 0x1 sdbfis 0x0 [69919.423082] ata3: ATA_REG 0x40 ERR_REG 0x0 [69919.423105] ata3: tag : dhfis dmafis sdbfis sacitve [69919.423126] ata3: tag 0x0: 1 1 0 1 [69919.423142] ata3: tag 0x1: 1 0 0 1 [69919.423165] ata3.00: exception Emask 0x0 SAct 0x3ff SErr 0x0 action 0x6 frozen [69919.423200] ata3.00: cmd 60/78:00:bc:cd:c6/00:00:19:00:00/40 tag 0 ncq 61440 in [69919.423201] res 40/00:00:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.423231] ata3.00: status: { DRDY } [69919.423250] ata3.00: cmd 60/40:08:74:d2:c6/00:00:19:00:00/40 tag 1 ncq 32768 in [69919.423252] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.423282] ata3.00: status: { DRDY } [69919.423301] ata3.00: cmd 60/40:10:f4:7f:ce/00:00:19:00:00/40 tag 2 ncq 32768 in [69919.423302] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.423332] ata3.00: status: { DRDY } [69919.423351] ata3.00: cmd 61/80:18:34:84:6b/00:00:0e:00:00/40 tag 3 ncq 65536 out [69919.423352] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.423382] ata3.00: status: { DRDY } [69919.423401] ata3.00: cmd 61/80:20:34:77:c6/00:00:19:00:00/40 tag 4 ncq 65536 out [69919.423402] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.423432] ata3.00: status: { DRDY } [69919.423451] ata3.00: cmd 61/08:28:b4:cd:c6/00:00:19:00:00/40 tag 5 ncq 4096 out [69919.423452] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.423483] ata3.00: status: { DRDY } [69919.423501] ata3.00: cmd 61/80:30:34:ce:c6/00:00:19:00:00/40 tag 6 ncq 65536 out [69919.423502] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.423533] ata3.00: status: { DRDY } [69919.423551] ata3.00: cmd 61/68:38:cc:d2:c6/00:00:19:00:00/40 tag 7 ncq 53248 out [69919.423553] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.423583] ata3.00: status: { DRDY } [69919.423602] ata3.00: cmd 61/40:40:b4:7f:ce/00:00:19:00:00/40 tag 8 ncq 32768 out [69919.423603] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.423633] ata3.00: status: { DRDY } [69919.423652] ata3.00: cmd 61/28:48:04:23:5c/00:00:1c:00:00/40 tag 9 ncq 20480 out [69919.423653] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [69919.425216] ata3.00: status: { DRDY } [69919.425237] ata3: hard resetting link [69919.898648] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [69919.914821] ata3.00: configured for UDMA/133 [69919.914845] ata3: EH complete [69919.915240] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [69919.915253] sd 2:0:0:0: [sda] Write Protect is off [69919.915256] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [69919.915294] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [70554.595503] ata4: EH in SWNCQ mode,QC:qc_active 0x3 sactive 0x3 [70554.595528] ata4: SWNCQ:qc_active 0x3 defer_bits 0x0 last_issue_tag 0x1 [70554.595529] dhfis 0x3 dmafis 0x1 sdbfis 0x0 [70554.595550] ata4: ATA_REG 0x40 ERR_REG 0x0 [70554.595567] ata4: tag : dhfis dmafis sdbfis sacitve [70554.595585] ata4: tag 0x0: 1 1 0 1 [70554.595601] ata4: tag 0x1: 1 0 0 1 [70554.595624] ata4.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen [70554.595649] ata4.00: cmd 60/10:00:b4:ff:7b/00:00:0b:00:00/40 tag 0 ncq 8192 in [70554.595650] res 40/00:00:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [70554.595681] ata4.00: status: { DRDY } [70554.595699] ata4.00: cmd 60/18:08:34:26:5c/00:00:1c:00:00/40 tag 1 ncq 12288 in [70554.595701] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [70554.595731] ata4.00: status: { DRDY } [70554.595752] ata4: hard resetting link [70555.071124] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [70555.087294] ata4.00: configured for UDMA/133 [70555.087308] ata4: EH complete [70555.087596] sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [70555.087609] sd 3:0:0:0: [sdb] Write Protect is off [70555.087611] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [70555.087627] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [74323.627855] ata8: EH in SWNCQ mode,QC:qc_active 0x3FF sactive 0x3FF [74323.627880] ata8: SWNCQ:qc_active 0xE defer_bits 0x3F1 last_issue_tag 0x3 [74323.627882] dhfis 0xE dmafis 0x2 sdbfis 0x0 [74323.627903] ata8: ATA_REG 0x40 ERR_REG 0x0 [74323.627920] ata8: tag : dhfis dmafis sdbfis sacitve [74323.627938] ata8: tag 0x1: 1 1 0 1 [74323.627954] ata8: tag 0x2: 1 0 0 1 [74323.627970] ata8: tag 0x3: 1 0 0 1 [74323.627993] ata8.00: exception Emask 0x0 SAct 0x3ff SErr 0x0 action 0x6 frozen [74323.628027] ata8.00: cmd 61/08:00:b4:d5:42/00:00:09:00:00/40 tag 0 ncq 4096 out [74323.628028] res 40/00:00:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628059] ata8.00: status: { DRDY } [74323.628078] ata8.00: cmd 61/00:08:34:de:9e/04:00:1a:00:00/40 tag 1 ncq 524288 out [74323.628079] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628109] ata8.00: status: { DRDY } [74323.628128] ata8.00: cmd 61/80:10:34:e2:9e/01:00:1a:00:00/40 tag 2 ncq 196608 out [74323.628129] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628160] ata8.00: status: { DRDY } [74323.628178] ata8.00: cmd 61/10:18:b4:d6:42/00:00:09:00:00/40 tag 3 ncq 8192 out [74323.628180] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628210] ata8.00: status: { DRDY } [74323.628228] ata8.00: cmd 61/08:20:84:50:32/00:00:06:00:00/40 tag 4 ncq 4096 out [74323.628230] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628260] ata8.00: status: { DRDY } [74323.628278] ata8.00: cmd 61/10:28:64:50:32/00:00:06:00:00/40 tag 5 ncq 8192 out [74323.628280] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628310] ata8.00: status: { DRDY } [74323.628329] ata8.00: cmd 61/08:30:8c:50:32/00:00:06:00:00/40 tag 6 ncq 4096 out [74323.628330] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628360] ata8.00: status: { DRDY } [74323.628379] ata8.00: cmd 61/c0:38:bc:d5:42/00:00:09:00:00/40 tag 7 ncq 98304 out [74323.628380] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628410] ata8.00: status: { DRDY } [74323.628429] ata8.00: cmd 61/20:40:94:d6:42/00:00:09:00:00/40 tag 8 ncq 16384 out [74323.628430] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628460] ata8.00: status: { DRDY } [74323.628479] ata8.00: cmd 60/08:48:d4:d6:42/00:00:09:00:00/40 tag 9 ncq 4096 in [74323.628480] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [74323.628510] ata8.00: status: { DRDY } [74323.628531] ata8: hard resetting link [74324.103482] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [74324.119660] ata8.00: configured for UDMA/133 [74324.119690] ata8: EH complete [74324.120147] sd 7:0:0:0: [sdf] 488397168 512-byte hardware sectors (250059 MB) [74324.120161] sd 7:0:0:0: [sdf] Write Protect is off [74324.120163] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [74324.120191] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [85720.177521] ata8: EH in SWNCQ mode,QC:qc_active 0x7F81 sactive 0x7F81 [85720.177556] ata8: SWNCQ:qc_active 0x380 defer_bits 0x7C01 last_issue_tag 0x9 [85720.177557] dhfis 0x180 dmafis 0x80 sdbfis 0x78 [85720.177579] ata8: ATA_REG 0x40 ERR_REG 0x0 [85720.177596] ata8: tag : dhfis dmafis sdbfis sacitve [85720.177614] ata8: tag 0x7: 1 1 0 1 [85720.177630] ata8: tag 0x8: 1 0 0 1 [85720.177646] ata8: tag 0x9: 0 0 0 1 [85720.177669] ata8.00: exception Emask 0x0 SAct 0x7f81 SErr 0x0 action 0x6 frozen [85720.177704] ata8.00: cmd 60/b8:00:b4:49:13/00:00:1b:00:00/40 tag 0 ncq 94208 in [85720.177705] res 40/00:00:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [85720.177737] ata8.00: status: { DRDY } [85720.177756] ata8.00: cmd 61/60:38:d4:17:ae/00:00:0b:00:00/40 tag 7 ncq 49152 out [85720.177757] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [85720.177788] ata8.00: status: { DRDY } [85720.177806] ata8.00: cmd 61/40:40:34:a9:5d/00:00:0c:00:00/40 tag 8 ncq 32768 out [85720.177808] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [85720.177838] ata8.00: status: { DRDY } [85720.177857] ata8.00: cmd 61/20:48:e4:83:6e/00:00:0c:00:00/40 tag 9 ncq 16384 out [85720.177858] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [85720.177889] ata8.00: status: { DRDY } [85720.177907] ata8.00: cmd 61/10:50:64:14:6e/00:00:0e:00:00/40 tag 10 ncq 8192 out [85720.177909] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [85720.177939] ata8.00: status: { DRDY } [85720.177958] ata8.00: cmd 61/08:58:a4:f0:b8/00:00:11:00:00/40 tag 11 ncq 4096 out [85720.177959] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [85720.177990] ata8.00: status: { DRDY } [85720.178008] ata8.00: cmd 61/08:60:b4:e8:d2/00:00:17:00:00/40 tag 12 ncq 4096 out [85720.178010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [85720.178040] ata8.00: status: { DRDY } [85720.178059] ata8.00: cmd 61/08:68:7c:fb:e4/00:00:17:00:00/40 tag 13 ncq 4096 out [85720.178060] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [85720.178090] ata8.00: status: { DRDY } [85720.178109] ata8.00: cmd 61/10:70:34:a0:5d/00:00:0c:00:00/40 tag 14 ncq 8192 out [85720.178110] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [85720.178141] ata8.00: status: { DRDY } [85720.178161] ata8: hard resetting link [85720.653112] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [85720.669332] ata8.00: configured for UDMA/133 [85720.669355] ata8: EH complete [85720.669869] sd 7:0:0:0: [sdf] 488397168 512-byte hardware sectors (250059 MB) [85720.669906] sd 7:0:0:0: [sdf] Write Protect is off [85720.669909] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [85720.669949] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [91657.761081] ata4: EH in SWNCQ mode,QC:qc_active 0x7 sactive 0x7 [91657.761106] ata4: SWNCQ:qc_active 0x4 defer_bits 0x3 last_issue_tag 0x2 [91657.761107] dhfis 0x4 dmafis 0x4 sdbfis 0x2 [91657.761128] ata4: ATA_REG 0x40 ERR_REG 0x0 [91657.761145] ata4: tag : dhfis dmafis sdbfis sacitve [91657.761163] ata4: tag 0x2: 1 1 0 1 [91657.761186] ata4.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozen [91657.761211] ata4.00: cmd 61/00:00:34:aa:45/04:00:09:00:00/40 tag 0 ncq 524288 out [91657.761212] res 40/00:00:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [91657.761243] ata4.00: status: { DRDY } [91657.761262] ata4.00: cmd 61/80:08:34:ae:45/00:00:09:00:00/40 tag 1 ncq 65536 out [91657.761263] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [91657.761294] ata4.00: status: { DRDY } [91657.761312] ata4.00: cmd 60/80:10:34:a5:45/00:00:09:00:00/40 tag 2 ncq 65536 in [91657.761313] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [91657.761344] ata4.00: status: { DRDY } [91657.761365] ata4: hard resetting link [91658.236701] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [91658.252873] ata4.00: configured for UDMA/133 [91658.252897] ata4: EH complete [91658.253231] sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [91658.253244] sd 3:0:0:0: [sdb] Write Protect is off [91658.253247] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [91658.253262] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [94460.937200] TCP: Treason uncloaked! Peer 77.30.42.61:4662/60248 shrinks window 2744624083:2744625635. Repaired. [97179.632833] TCP: Treason uncloaked! Peer 77.30.42.61:4662/60248 shrinks window 2753423541:2753426377. Repaired. [97189.121253] TCP: Treason uncloaked! Peer 77.30.42.61:4662/60248 shrinks window 2753423541:2753426377. Repaired. [104602.385718] ata4: EH in SWNCQ mode,QC:qc_active 0x37F sactive 0x37F [104602.385744] ata4: SWNCQ:qc_active 0x300 defer_bits 0x7F last_issue_tag 0x9 [104602.385746] dhfis 0x300 dmafis 0x100 sdbfis 0xC0 [104602.385767] ata4: ATA_REG 0x40 ERR_REG 0x0 [104602.385784] ata4: tag : dhfis dmafis sdbfis sacitve [104602.385802] ata4: tag 0x8: 1 1 0 1 [104602.385819] ata4: tag 0x9: 1 0 0 1 [104602.385842] ata4.00: exception Emask 0x0 SAct 0x37f SErr 0x0 action 0x6 frozen [104602.385876] ata4.00: cmd 61/80:00:34:86:5e/00:00:1b:00:00/40 tag 0 ncq 65536 out [104602.385877] res 40/00:00:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [104602.385908] ata4.00: status: { DRDY } [104602.385927] ata4.00: cmd 61/18:08:7c:39:09/00:00:0f:00:00/40 tag 1 ncq 12288 out [104602.385928] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [104602.385959] ata4.00: status: { DRDY } [104602.385978] ata4.00: cmd 61/10:10:64:79:8d/00:00:03:00:00/40 tag 2 ncq 8192 out [104602.385979] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [104602.386013] ata4.00: status: { DRDY } [104602.386032] ata4.00: cmd 61/08:18:b4:c8:b9/00:00:0a:00:00/40 tag 3 ncq 4096 out [104602.386033] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [104602.386063] ata4.00: status: { DRDY } [104602.386082] ata4.00: cmd 61/20:20:14:c9:b9/00:00:0a:00:00/40 tag 4 ncq 16384 out [104602.386083] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [104602.386114] ata4.00: status: { DRDY } [104602.386132] ata4.00: cmd 61/58:28:bc:c8:b9/00:00:0a:00:00/40 tag 5 ncq 45056 out [104602.386134] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [104602.386164] ata4.00: status: { DRDY } [104602.386183] ata4.00: cmd 61/38:30:d4:22:af/00:00:0b:00:00/40 tag 6 ncq 28672 out [104602.386184] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [104602.386215] ata4.00: status: { DRDY } [104602.386233] ata4.00: cmd 61/80:40:b4:fa:97/00:00:15:00:00/40 tag 8 ncq 65536 out [104602.386235] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [104602.386265] ata4.00: status: { DRDY } [104602.386284] ata4.00: cmd 61/80:48:b4:f6:cd/00:00:19:00:00/40 tag 9 ncq 65536 out [104602.386285] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [104602.386315] ata4.00: status: { DRDY } [104602.386337] ata4: hard resetting link [104602.861347] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [104602.877503] ata4.00: configured for UDMA/133 [104602.877529] ata4: EH complete [104602.877847] sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [104602.877860] sd 3:0:0:0: [sdb] Write Protect is off [104602.877862] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [104602.877878] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [133737.469406] ata5: EH in SWNCQ mode,QC:qc_active 0x7 sactive 0x7 [133737.469431] ata5: SWNCQ:qc_active 0x3 defer_bits 0x4 last_issue_tag 0x1 [133737.469432] dhfis 0x3 dmafis 0x1 sdbfis 0x0 [133737.469453] ata5: ATA_REG 0x40 ERR_REG 0x0 [133737.469470] ata5: tag : dhfis dmafis sdbfis sacitve [133737.469488] ata5: tag 0x0: 1 1 0 1 [133737.469504] ata5: tag 0x1: 1 0 0 1 [133737.469527] ata5.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozen [133737.469552] ata5.00: cmd 60/10:00:34:f5:13/00:00:07:00:00/40 tag 0 ncq 8192 in [133737.469553] res 40/00:00:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [133737.469587] ata5.00: status: { DRDY } [133737.469606] ata5.00: cmd 60/28:08:64:9f:67/00:00:1c:00:00/40 tag 1 ncq 20480 in [133737.469608] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133737.469638] ata5.00: status: { DRDY } [133737.469657] ata5.00: cmd 60/80:10:34:0a:c6/00:00:1a:00:00/40 tag 2 ncq 65536 in [133737.469658] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133737.469688] ata5.00: status: { DRDY } [133737.469710] ata5: hard resetting link [133737.945037] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [133737.961234] ata5.00: configured for UDMA/133 [133737.961248] ata5: EH complete [133737.961550] sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) [133737.961564] sd 4:0:0:0: [sdc] Write Protect is off [133737.961566] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [133737.961582] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [140640.073758] parport_pc 00:07: disabled [140640.337930] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff [140640.337937] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff [140640.337939] parport 0x378: You gave this address, but there is probably no parallel port there! [140640.337958] parport0: PC-style at 0x378 [PCSPP,TRISTATE] [140640.551468] parport_pc 00:07: activated [140640.551473] parport_pc 00:07: reported by Plug and Play ACPI [140640.551516] parport0: PC-style at 0x378, irq 7 [PCSPP] [140640.681110] lp0: using parport0 (interrupt-driven). [140640.768948] ppa: Version 2.07 (for Linux 2.4.x) [140640.869306] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [140640.869312] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [140640.985201] Driver 'sr' needs updating - please use bus_type methods [140641.005969] st: Version 20070203, fixed bufsize 32768, s/g segs 256 [140641.005994] Driver 'st' needs updating - please use bus_type methods