[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.24-13-server (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu6)) #1 SMP Sun Mar 30 23:24:44 UTC 2008 (Ubuntu 2.6.24-13.23-server) [ 0.000000] Command line: BOOT_IMAGE=Linux ro root=/dev/evms/root panic=5 mce=bootlog console=tty0 console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097800 (usable) [ 0.000000] BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 151) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1572864 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7A90 checksum 0 [ 0.000000] ACPI: RSDP 000F7A90, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 7FEE3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FEE3180, 64F5 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEE0000, 0040 [ 0.000000] ACPI: SSDT 7FEE9780, 01CA (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: SRAT 7FEE99C0, 00C8 (r1 AMD HAMMER 1 AMD 1) [ 0.000000] ACPI: APIC 7FEE96C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0, 151) 0 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] Entering add_active_range(0, 0, 151) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-180000000 [ 0.000000] Entering add_active_range(0, 0, 151) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524000) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1572864 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 151 [ 0.000000] 0: 256 -> 524000 [ 0.000000] 0: 1048576 -> 1572864 [ 0.000000] On node 0 totalpages: 1048183 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1325 pages reserved [ 0.000000] DMA zone: 2610 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505624 pages, LIFO batch:31 [ 0.000000] Normal zone: 7168 pages used for memmap [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 0000000000097000 - 0000000000098000 [ 0.000000] swsusp: Registered nosave memory region: 0000000000098000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fee0000 - 000000007fee3000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fee3000 - 000000007fef0000 [ 0.000000] swsusp: Registered nosave memory region: 000000007fef0000 - 000000007ff00000 [ 0.000000] swsusp: Registered nosave memory region: 000000007ff00000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 41952 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025354 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=/dev/evms/root panic=5 mce=bootlog console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 36.171344] Marking TSC unstable due to TSCs unsynchronized [ 36.171346] time.c: Detected 2210.183 MHz processor. [ 36.174248] Console: colour VGA+ 80x50 [ 36.174250] console [tty0] enabled [ 36.178367] console [ttyS0] enabled [ 36.661542] Checking aperture... [ 36.664798] CPU 0: aperture @ 80000000 size 1024 MB [ 36.707870] Memory: 4093304k/6291456k available (2523k kernel code, 99428k reserved, 1332k data, 328k init) [ 36.717681] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 36.870871] Calibrating delay using timer specific routine.. 4422.47 BogoMIPS (lpj=22112351) [ 36.879401] Security Framework initialized [ 36.883531] SELinux: Disabled at boot. [ 36.887405] AppArmor: AppArmor initialized [ 36.891533] Failure registering capabilities with primary security module. [ 36.898701] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 36.908457] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 36.916774] Mount-cache hash table entries: 256 [ 36.921463] Initializing cgroup subsys ns [ 36.925502] Initializing cgroup subsys cpuacct [ 36.929980] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 36.937141] CPU: L2 Cache: 1024K (64 bytes/line) [ 36.941788] CPU 0/0 -> Node 0 [ 36.944784] CPU: Physical Processor ID: 0 [ 36.948819] CPU: Processor Core ID: 0 [ 36.952529] SMP alternatives: switching to UP code [ 36.957870] Early unpacking initramfs... done [ 37.242849] ACPI: Core revision 20070126 [ 37.246856] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 37.364320] Using local APIC timer interrupts. [ 37.414013] APIC timer calibration result 12557861 [ 37.414015] Detected 12.557 MHz APIC timer. [ 37.418315] SMP alternatives: switching to SMP code [ 37.423644] Booting processor 1/2 APIC 0x1 [ 37.438021] Initializing CPU#1 [ 37.588290] Calibrating delay using timer specific routine.. 4420.39 BogoMIPS (lpj=22101979) [ 37.588296] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 37.588297] CPU: L2 Cache: 1024K (64 bytes/line) [ 37.588299] CPU 1/1 -> Node 0 [ 37.588301] CPU: Physical Processor ID: 0 [ 37.588302] CPU: Processor Core ID: 1 [ 37.588410] AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 [ 37.588281] Brought up 2 CPUs [ 37.631978] CPU0 attaching sched-domain: [ 37.631980] domain 0: span 00000000,00000003 [ 37.631982] groups: 00000000,00000001 00000000,00000002 [ 37.631986] domain 1: span 00000000,00000003 [ 37.631987] groups: 00000000,00000003 [ 37.631989] CPU1 attaching sched-domain: [ 37.631991] domain 0: span 00000000,00000003 [ 37.631992] groups: 00000000,00000002 00000000,00000001 [ 37.631995] domain 1: span 00000000,00000003 [ 37.631997] groups: 00000000,00000003 [ 37.632205] net_namespace: 120 bytes [ 37.636199] Time: 3:58:58 Date: 04/02/08 [ 37.640373] NET: Registered protocol family 16 [ 37.645008] ACPI: bus type pci registered [ 37.649108] PCI: Using configuration type 1 [ 37.654524] ACPI: EC: Look up EC in DSDT [ 37.660658] ACPI: Interpreter enabled [ 37.664350] ACPI: (supports S0 S1 S4 S5) [ 37.668482] ACPI: Using IOAPIC for interrupt routing [ 37.681523] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 37.686792] PCI: Transparent bridge - 0000:00:09.0 [ 37.692073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 37.692347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 37.746045] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 5 7 9 10 *11 12 14 15) [ 37.753538] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 5 7 9 *10 11 12 14 15) [ 37.761036] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 5 7 9 *10 11 12 14 15) [ 37.768526] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 *5 7 9 10 11 12 14 15) [ 37.776017] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 37.784726] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 5 7 9 *10 11 12 14 15) [ 37.792217] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 37.800925] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 5 7 9 10 *11 12 14 15) [ 37.808418] ACPI: PCI Interrupt Link [LACI] (IRQs 3 *5 7 9 10 11 12 14 15) [ 37.815908] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 *5 7 9 10 11 12 14 15) [ 37.823401] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 *5 7 9 10 11 12 14 15) [ 37.830897] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 5 7 9 10 *11 12 14 15) [ 37.838387] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 37.847100] ACPI: PCI Interrupt Link [LSID] (IRQs 3 5 7 9 10 *11 12 14 15) [ 37.854599] ACPI: PCI Interrupt Link [LFID] (IRQs 3 5 7 9 *10 11 12 14 15) [ 37.862099] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. [ 37.870825] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 37.876500] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 37.882174] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 37.887848] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 37.893465] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 37.899928] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 37.906501] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 37.914067] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 37.920643] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 37.927217] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0 [ 37.933792] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 37.940367] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 37.946941] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 37.954514] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 37.961098] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 37.967678] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 37.975174] Linux Plug and Play Support v0.97 (c) Adam Belay [ 37.980882] pnp: PnP ACPI init [ 37.983971] ACPI: bus type pnp registered [ 37.992629] pnpacpi: exceeded the max number of mem resources: 12 [ 37.998803] pnp: PnP ACPI: found 14 devices [ 38.003015] ACPI: ACPI bus type pnp unregistered [ 38.007853] PCI: Using ACPI for IRQ routing [ 38.012068] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 38.067809] NET: Registered protocol family 8 [ 38.072194] NET: Registered protocol family 20 [ 38.076686] NetLabel: Initializing [ 38.080120] NetLabel: domain hash size = 128 [ 38.084504] NetLabel: protocols = UNLABELED CIPSOv4 [ 38.089508] NetLabel: unlabeled traffic allowed by default [ 38.095144] PCI-DMA: Disabling AGP. [ 38.100569] PCI-DMA: aperture base @ 80000000 size 1048576 KB [ 38.106347] PCI-DMA: using GART IOMMU. [ 38.110162] PCI-DMA: Reserving 1024MB of IOMMU area in the AGP aperture [ 38.119895] AppArmor: AppArmor Filesystem Enabled [ 38.157816] system 00:01: ioport range 0x1000-0x107f has been reserved [ 38.164368] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 38.170921] system 00:01: ioport range 0x1400-0x147f has been reserved [ 38.177473] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 38.184026] system 00:01: ioport range 0x1800-0x187f has been reserved [ 38.190576] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 38.197129] system 00:01: iomem range 0x0-0x0 could not be reserved [ 38.203426] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 38.209807] system 00:02: ioport range 0xca0-0xcaf has been reserved [ 38.216186] system 00:02: ioport range 0x800-0x87f has been reserved [ 38.222576] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved [ 38.230097] system 00:0d: iomem range 0xcf800-0xcffff has been reserved [ 38.236736] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 38.243721] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 38.250707] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 38.257693] system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 38.265214] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved [ 38.272372] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 38.279010] system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved [ 38.286356] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 38.293515] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reserved [ 38.303295] system 00:0d: iomem range 0xfefff000-0xfeffffff has been reserved [ 38.310453] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved [ 38.317966] PCI: Bridge: 0000:00:09.0 [ 38.321658] IO window: a000-afff [ 38.325091] MEM window: fc000000-fdffffff [ 38.329304] Time: acpi_pm clocksource has been installed. [ 38.334740] Switched to high resolution mode on CPU 0 [ 38.334744] PREFETCH window: fea00000-feafffff [ 38.337954] Switched to high resolution mode on CPU 1 [ 38.339398] PCI: Bridge: 0000:00:0b.0 [ 38.343091] IO window: 9000-9fff [ 38.346524] MEM window: fe900000-fe9fffff [ 38.350741] PREFETCH window: fe800000-fe8fffff [ 38.355388] PCI: Bridge: 0000:00:0c.0 [ 38.359080] IO window: 8000-8fff [ 38.362519] MEM window: fe700000-fe7fffff [ 38.366731] PREFETCH window: fe600000-fe6fffff [ 38.371383] PCI: Bridge: 0000:00:0d.0 [ 38.375075] IO window: 7000-7fff [ 38.378507] MEM window: fe500000-fe5fffff [ 38.382726] PREFETCH window: fe400000-fe4fffff [ 38.387370] PCI: Bridge: 0000:00:0e.0 [ 38.391068] IO window: 6000-6fff [ 38.394500] MEM window: fe300000-fe3fffff [ 38.398710] PREFETCH window: fe200000-fe2fffff [ 38.403365] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 38.403376] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 38.403382] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 38.403388] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 38.403393] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 38.403403] NET: Registered protocol family 2 [ 38.499398] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 38.507983] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 38.520384] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 38.527761] TCP: Hash tables configured (established 524288 bind 65536) [ 38.534412] TCP reno registered [ 38.559297] checking if image is initramfs... it is [ 39.163712] Freeing initrd memory: 7790k freed [ 39.174263] audit: initializing netlink socket (disabled) [ 39.179704] audit(1207108738.470:1): initialized [ 39.184743] Total HugeTLB memory allocated, 0 [ 39.191024] VFS: Disk quotas dquot_6.5.1 [ 39.195046] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 39.201681] io scheduler noop registered [ 39.205633] io scheduler anticipatory registered [ 39.210278] io scheduler deadline registered (default) [ 39.215546] io scheduler cfq registered [ 39.220376] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 39.226262] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 39.232044] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 39.237906] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 39.243685] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 39.249547] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 39.255325] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 39.261187] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 39.266968] Boot video device is 0000:01:05.0 [ 39.266974] PCI: Firmware left 0000:01:0a.0 e100 interrupts enabled, disabling [ 39.274404] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 39.274422] assign_interrupt_mode Found MSI capability [ 39.279601] Allocate Port Service[0000:00:0b.0:pcie00] [ 39.279666] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 39.279683] assign_interrupt_mode Found MSI capability [ 39.284865] Allocate Port Service[0000:00:0c.0:pcie00] [ 39.284920] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 39.284936] assign_interrupt_mode Found MSI capability [ 39.290110] Allocate Port Service[0000:00:0d.0:pcie00] [ 39.290164] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 39.290180] assign_interrupt_mode Found MSI capability [ 39.295360] Allocate Port Service[0000:00:0e.0:pcie00] [ 39.320751] Real Time Clock Driver v1.12ac [ 39.324985] Linux agpgart interface v0.102 [ 39.329111] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 39.337031] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 39.343183] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 39.349635] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 39.355410] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 39.361402] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 39.367180] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 39.376094] 0000:01:09.0: ttyS2 at I/O 0xa400 (irq = 18) is a 16550A [ 39.382615] 0000:01:09.0: ttyS3 at I/O 0xa408 (irq = 18) is a 16550A [ 39.389703] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 39.397380] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 39.405248] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 39.411460] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 39.421651] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 39.471287] mice: PS/2 mouse device common for all mice [ 39.476576] cpuidle: using governor ladder [ 39.480710] cpuidle: using governor menu [ 39.484792] NET: Registered protocol family 1 [ 39.489232] registered taskstats version 1 [ 39.493498] Magic number: 4:892:966 [ 39.497201] hash matches device ttyb7 [ 39.501157] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 39.503505] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 39.518449] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 39.524706] Freeing unused kernel memory: 328k freed [ 39.678892] fuse init (API version 7.9) [ 39.696625] ACPI: Fan [FAN] (on) [ 39.707524] ACPI: Thermal Zone [THRM] (34 C) [ 39.799850] device-mapper: uevent: version 1.0.3 [ 39.804524] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 39.817987] md: linear personality registered for level -1 [ 39.826821] md: raid0 personality registered for level 0 [ 40.089266] usbcore: registered new interface driver usbfs [ 40.094802] usbcore: registered new interface driver hub [ 40.100222] md: raid1 personality registered for level 1 [ 40.109076] usbcore: registered new device driver usb [ 40.114228] md: raid10 personality registered for level 10 [ 40.140506] SCSI subsystem initialized [ 40.150297] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 40.150685] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 40.156468] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 40.165562] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 40.165568] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 40.171060] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 40.178522] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfebff000 [ 40.184267] libata version 3.00 loaded. [ 40.186135] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 40.192619] Copyright (c) 1999-2006 Intel Corporation. [ 40.198117] xor: automatically using best checksumming function: generic_sse [ 40.250492] generic_sse: 7085.200 MB/sec [ 40.254791] xor: using function: generic_sse (7085.200 MB/sec) [ 40.262879] usb usb1: configuration #1 chosen from 1 choice [ 40.268508] hub 1-0:1.0: USB hub found [ 40.272295] hub 1-0:1.0: 8 ports detected [ 40.295446] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 40.301585] e100: Copyright(c) 1999-2006 Intel Corporation [ 40.309366] async_tx: api initialized (async) [ 40.324384] FDC 0 is a post-1991 82077 [ 40.480347] raid6: int64x1 2217 MB/s [ 40.500722] tg3.c:v3.86 (November 9, 2007) [ 40.505142] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 40.510930] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 40.519744] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 40.520745] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 40.526529] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 40.535540] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 40.535546] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 40.540873] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 40.548333] ehci_hcd 0000:00:02.1: debug port 1 [ 40.552901] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 40.552911] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 [ 40.575905] eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:e0:81:5c:65:11 [ 40.587138] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 40.594664] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 40.599942] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 40.607568] usb usb2: configuration #1 chosen from 1 choice [ 40.613199] hub 2-0:1.0: USB hub found [ 40.616984] hub 2-0:1.0: 8 ports detected [ 40.650233] raid6: int64x2 2728 MB/s [ 40.760934] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 40.766716] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 40.775544] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 40.820116] raid6: int64x4 2806 MB/s [ 40.840359] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1b:21:02:87:95 [ 40.942949] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 40.950157] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 40.955945] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [ 40.964772] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 40.989986] raid6: int64x8 2170 MB/s [ 41.029548] e1000: 0000:03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1b:21:02:87:c8 [ 41.132952] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection [ 41.139938] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 41.159933] raid6: sse2x1 2584 MB/s [ 41.169174] e100: eth3: e100_probe: addr 0xfdffe000, irq 17, MAC addr 00:02:b3:1f:6c:80 [ 41.177493] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 41.185233] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 41.191022] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 41.199830] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 41.329779] raid6: sse2x2 826 MB/s [ 41.499658] raid6: sse2x4 1425 MB/s [ 41.503436] raid6: using algorithm sse2x1 (2584 MB/s) [ 41.508521] md: raid6 personality registered for level 6 [ 41.513859] md: raid5 personality registered for level 5 [ 41.519201] md: raid4 personality registered for level 4 [ 41.727640] forcedeth 0000:00:0a.0: ifname eth4, PHY OUI 0x5043 @ 1, addr 00:e0:81:5c:65:12 [ 41.736038] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 [ 41.743124] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 41.743610] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 41.749387] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 41.758228] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 41.758235] ACPI: PCI interrupt for device 0000:00:07.0 disabled [ 41.764683] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 41.770463] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 41.779284] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 41.779290] ACPI: PCI interrupt for device 0000:00:08.0 disabled [ 41.788783] sata_nv 0000:00:07.0: version 3.5 [ 41.788791] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 41.797612] sata_nv 0000:00:07.0: Using ADMA mode [ 41.802627] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 41.802829] scsi0 : sata_nv [ 41.805726] scsi1 : sata_nv [ 41.808733] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20 [ 41.815737] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20 [ 41.836927] usb 1-5: new low speed USB device using ohci_hcd and address 2 [ 42.054845] usb 1-5: configuration #1 chosen from 1 choice [ 42.073555] usbcore: registered new interface driver hiddev [ 42.083706] input: HID 062a:0000 as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.0/input/input2 [ 42.156731] input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-5 [ 42.164669] usbcore: registered new interface driver usbhid [ 42.170275] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 42.299294] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 42.364733] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 42.370427] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 42.447986] ata1.00: configured for UDMA/133 [ 42.776274] ata2: SATA link down (SStatus 0 SControl 300) [ 42.781979] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 42.790117] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 42.798490] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 42.807308] sata_nv 0000:00:08.0: Using ADMA mode [ 42.812343] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 42.812443] scsi2 : sata_nv [ 42.815342] scsi3 : sata_nv [ 42.818353] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23 [ 42.825355] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23 [ 43.156201] ata3: SATA link down (SStatus 0 SControl 300) [ 43.485791] ata4: SATA link down (SStatus 0 SControl 300) [ 43.491275] pata_amd 0000:00:06.0: version 0.3.10 [ 43.491313] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 43.492288] scsi4 : pata_amd [ 43.495563] scsi5 : pata_amd [ 43.499074] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 [ 43.506069] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 [ 43.513871] Driver 'sd' needs updating - please use bus_type methods [ 43.520345] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 43.527514] sd 0:0:0:0: [sda] Write Protect is off [ 43.532340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 43.532374] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 43.543546] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 43.550730] sd 0:0:0:0: [sda] Write Protect is off [ 43.555548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 43.556339] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 43.565427] sda: sda1 sda2 sda3 [ 43.588225] sd 0:0:0:0: [sda] Attached SCSI disk [ 43.596476] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 43.914356] md: bind [ 43.926776] raid1: raid set md0 active with 1 out of 2 mirrors [ 44.084900] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 44.094836] SGI XFS Quota Management subsystem [ 44.118421] Filesystem "dm-6": Disabling barriers, not supported by the underlying device [ 44.126846] XFS mounting filesystem dm-6 [ 44.182184] Ending clean XFS mount for filesystem: dm-6 [ 47.464983] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 47.683105] parport_pc 00:0a: reported by Plug and Play ACPI [ 47.688852] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 47.709392] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 47.746245] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 48.025593] input: Power Button (FF) as /devices/virtual/input/input4 [ 48.068262] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 48.074140] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 48.225290] ACPI: Power Button (FF) [PWRF] [ 48.229480] input: Power Button (CM) as /devices/virtual/input/input5 [ 48.385190] ACPI: Power Button (CM) [PWRB] [ 50.220413] NET: Registered protocol family 17 [ 50.424961] lp0: using parport0 (interrupt-driven). [ 50.514243] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (2 cpu cores) (version 2.20.00) [ 50.525273] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 [ 50.530876] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa [ 50.536492] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc [ 50.542097] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0xe [ 51.203245] dme1737 0-002e: Found a DME1737 chip at 0x2e (rev 0x89). [ 51.240726] dme1737 0-002e: Optional features: pwm3=yes, pwm5=no, pwm6=no, fan3=yes, fan4=yes, fan5=no, fan6=no. [ 51.490364] Adding 8388596k swap on /dev/evms/swap. Priority:-1 extents:1 across:8388596k [ 51.554941] Filesystem "dm-6": Disabling barriers, not supported by the underlying device [ 52.152840] NET: Registered protocol family 10 [ 52.153082] lo: Disabled Privacy Extensions [ 52.878492] Filesystem "dm-4": Disabling barriers, not supported by the underlying device [ 52.886436] XFS mounting filesystem dm-4 [ 52.945521] Ending clean XFS mount for filesystem: dm-4 [ 52.953797] Filesystem "dm-2": Disabling barriers, not supported by the underlying device [ 52.966051] XFS mounting filesystem dm-2 [ 53.029174] Ending clean XFS mount for filesystem: dm-2 [ 53.043656] Filesystem "dm-7": Disabling barriers, not supported by the underlying device [ 53.049177] XFS mounting filesystem dm-7 [ 53.094071] Ending clean XFS mount for filesystem: dm-7 [ 82.657751] Bluetooth: Core ver 2.11 [ 82.658123] NET: Registered protocol family 31 [ 82.658126] Bluetooth: HCI device and connection manager initialized [ 82.658130] Bluetooth: HCI socket layer initialized [ 82.678403] Clocksource tsc unstable (delta = -133288003 ns) [ 83.554287] RPC: Registered udp transport module. [ 83.554291] RPC: Registered tcp transport module. [ 83.600580] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 83.667908] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 83.667939] NFSD: starting 90-second grace period [ 84.339293] process `snmpd' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.