[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff50000 (usable) [ 0.000000] BIOS-e820: 000000003ff50000 - 000000003ff67000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff67000 - 000000003ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261968) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261968 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261968 [ 0.000000] On node 0 totalpages: 261968 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 254 pages used for memmap [ 0.000000] HighMem zone: 32338 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6D70 checksum 0 [ 0.000000] ACPI: RSDP 000F6D70, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 3FF5A6BD, 004C (r1 IBM TP-1R 3210 LTP 0) [ 0.000000] ACPI: FACP 3FF5A800, 00F4 (r3 IBM TP-1R 3210 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3FF5A9E7, C4E5 (r1 IBM TP-1R 3210 MSFT 100000E) [ 0.000000] ACPI: FACS 3FF78000, 0040 [ 0.000000] ACPI: SSDT 3FF5A9B4, 0033 (r1 IBM TP-1R 3210 MSFT 100000E) [ 0.000000] ACPI: ECDT 3FF66ECC, 0052 (r1 IBM TP-1R 3210 IBM 1) [ 0.000000] ACPI: TCPA 3FF66F1E, 0032 (r1 IBM TP-1R 3210 PTL 1) [ 0.000000] ACPI: BOOT 3FF66FD8, 0028 (r1 IBM TP-1R 3210 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259922 [ 0.000000] Kernel command line: root=UUID=808e940d-c04e-49b6-be39-5f0e96462877 ro splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0180f000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1495.188 MHz processor. [ 3.956101] Console: colour VGA+ 80x25 [ 3.956106] console [tty0] enabled [ 3.958449] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 3.959184] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 4.000245] Memory: 1026648k/1047872k available (2157k kernel code, 20532k reserved, 998k data, 364k init, 130368k highmem) [ 4.000307] virtual kernel memory layout: [ 4.000308] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 4.000310] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 4.000311] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 4.000312] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 4.000314] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 4.000315] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 4.000317] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 4.000598] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 4.000733] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 4.080705] Calibrating delay using timer specific routine.. 2992.61 BogoMIPS (lpj=5985233) [ 4.080822] Security Framework initialized [ 4.080870] SELinux: Disabled at boot. [ 4.080927] AppArmor: AppArmor initialized [ 4.080966] Failure registering capabilities with primary security module. [ 4.081015] Mount-cache hash table entries: 512 [ 4.081251] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 4.081270] CPU: L1 I cache: 32K, L1 D cache: 32K [ 4.081332] CPU: L2 cache: 1024K [ 4.081368] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000 [ 4.081380] Compat vDSO mapped to ffffe000. [ 4.081431] Checking 'hlt' instruction... OK. [ 4.097187] SMP alternatives: switching to UP code [ 4.099486] Freeing SMP alternatives: 11k freed [ 4.099671] Early unpacking initramfs... done [ 4.526850] ACPI: Core revision 20070126 [ 4.527014] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 4.532066] ACPI: setting ELCR to 0200 (from 0800) [ 4.569538] CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05 [ 4.569623] SMP motherboard not detected. [ 4.569658] Local APIC not detected. Using dummy APIC emulation. [ 4.569745] Brought up 1 CPUs [ 4.569800] CPU0 attaching sched-domain: [ 4.569803] domain 0: span 01 [ 4.569805] groups: 01 [ 4.570014] net_namespace: 64 bytes [ 4.570055] Booting paravirtualized kernel on bare hardware [ 4.570786] Time: 22:57:09 Date: 04/13/08 [ 4.570851] NET: Registered protocol family 16 [ 4.571105] EISA bus registered [ 4.571149] ACPI: bus type pci registered [ 4.571515] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 4.571554] PCI: Using configuration type 1 [ 4.571589] Setting up standard PCI resources [ 4.576478] ACPI: EC: EC description table is found, configuring boot EC [ 4.582616] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 4.585933] ACPI: Interpreter enabled [ 4.585970] ACPI: (supports S0 S3 S4 S5) [ 4.586101] ACPI: Using PIC for interrupt routing [ 4.593407] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 4.593448] ACPI: EC: driver started in poll mode [ 4.593640] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 4.594070] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 4.594110] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 4.594679] PCI: Transparent bridge - 0000:00:1e.0 [ 4.594826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 4.594890] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 4.594917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 4.598974] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 4.599429] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 4.599879] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 4.600362] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 4.600795] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 4.601279] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 4.601762] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 4.602264] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 4.602749] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 4.602870] ACPI: Power Resource [PUBS] (on) [ 4.602953] Linux Plug and Play Support v0.97 (c) Adam Belay [ 4.603022] pnp: PnP ACPI init [ 4.603062] ACPI: bus type pnp registered [ 4.604279] pnpacpi: exceeded the max number of mem resources: 12 [ 4.606997] pnp: PnP ACPI: found 13 devices [ 4.607034] ACPI: ACPI bus type pnp unregistered [ 4.607072] PnPBIOS: Disabled by ACPI PNP [ 4.607352] PCI: Using ACPI for IRQ routing [ 4.607389] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 4.628038] NET: Registered protocol family 8 [ 4.628074] NET: Registered protocol family 20 [ 4.628184] AppArmor: AppArmor Filesystem Enabled [ 4.632024] Time: tsc clocksource has been installed. [ 4.640054] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 4.640094] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 4.640134] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 4.640173] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 4.640213] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 4.640253] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 4.640292] system 00:00: iomem range 0x0-0x0 could not be reserved [ 4.640331] system 00:00: iomem range 0x0-0x0 could not be reserved [ 4.640370] system 00:00: iomem range 0xdc000-0xdffff has been reserved [ 4.640409] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 4.640448] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 4.640488] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 4.640531] system 00:02: ioport range 0x1000-0x107f has been reserved [ 4.640570] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 4.640609] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 4.640648] system 00:02: ioport range 0x1600-0x162f has been reserved [ 4.640687] system 00:02: ioport range 0x1632-0x167f has been reserved [ 4.640726] system 00:02: ioport range 0x1630-0x1631 has been reserved [ 4.671186] PCI: Bridge: 0000:00:01.0 [ 4.671222] IO window: 3000-3fff [ 4.671258] MEM window: c0100000-c01fffff [ 4.671294] PREFETCH window: e0000000-e7ffffff [ 4.671337] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 4.671373] IO window: 00004000-000040ff [ 4.671410] IO window: 00004400-000044ff [ 4.671447] PREFETCH window: e8000000-ebffffff [ 4.671485] MEM window: c4000000-c7ffffff [ 4.671522] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 4.671558] IO window: 00004800-000048ff [ 4.671594] IO window: 00004c00-00004cff [ 4.671631] PREFETCH window: ec000000-efffffff [ 4.671669] MEM window: c8000000-cbffffff [ 4.671706] PCI: Bridge: 0000:00:1e.0 [ 4.671741] IO window: 4000-8fff [ 4.671778] MEM window: c0200000-cfffffff [ 4.671815] PREFETCH window: e8000000-efffffff [ 4.671865] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 4.672265] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 4.672303] PCI: setting IRQ 11 as level-triggered [ 4.672307] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 4.672760] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 4.672798] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 4.672902] NET: Registered protocol family 2 [ 4.712024] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 4.712390] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.714037] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 4.715218] TCP: Hash tables configured (established 131072 bind 65536) [ 4.715259] TCP reno registered [ 4.728137] checking if image is initramfs... it is [ 5.171379] Switched to high resolution mode on CPU 0 [ 5.560629] Freeing initrd memory: 7426k freed [ 5.560923] Simple Boot Flag at 0x35 set to 0x1 [ 5.561358] audit: initializing netlink socket (disabled) [ 5.561414] audit(1208127430.528:1): initialized [ 5.561654] highmem bounce pool size: 64 pages [ 5.564074] VFS: Disk quotas dquot_6.5.1 [ 5.564210] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.564434] io scheduler noop registered [ 5.564471] io scheduler anticipatory registered [ 5.564507] io scheduler deadline registered [ 5.564558] io scheduler cfq registered (default) [ 5.564668] Boot video device is 0000:01:00.0 [ 5.565013] isapnp: Scanning for PnP cards... [ 5.917620] isapnp: No Plug & Play device found [ 5.953226] Real Time Clock Driver v1.12ac [ 5.953389] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 5.953628] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 5.954671] serial 00:0a: activated [ 5.954972] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 5.955207] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 5.955306] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 5.956059] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 5.956186] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 5.956351] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 5.961564] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.961604] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.970336] mice: PS/2 mouse device common for all mice [ 5.970498] EISA: Probing bus 0 at eisa.0 [ 5.970538] Cannot allocate resource for EISA slot 1 [ 5.970576] Cannot allocate resource for EISA slot 2 [ 5.970612] Cannot allocate resource for EISA slot 3 [ 5.970648] Cannot allocate resource for EISA slot 4 [ 5.970685] Cannot allocate resource for EISA slot 5 [ 5.970721] Cannot allocate resource for EISA slot 6 [ 5.970757] Cannot allocate resource for EISA slot 7 [ 5.970794] Cannot allocate resource for EISA slot 8 [ 5.970830] EISA: Detected 0 cards. [ 5.970866] cpuidle: using governor ladder [ 5.970901] cpuidle: using governor menu [ 5.971048] NET: Registered protocol family 1 [ 5.971116] Using IPI No-Shortcut mode [ 5.971188] registered taskstats version 1 [ 5.971355] Magic number: 4:740:1007 [ 5.971394] hash matches device ttye6 [ 5.971559] hash matches device 00:09 [ 5.971596] hash matches device 0000:02:02.0 [ 5.971651] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.971689] EDD information not available. [ 5.971990] Freeing unused kernel memory: 364k freed [ 5.976127] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 7.264024] fuse init (API version 7.9) [ 7.297120] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 7.297130] ACPI: Processor [CPU] (supports 8 throttling states) [ 7.299926] ACPI: Thermal Zone [THM0] (55 C) [ 8.262811] usbcore: registered new interface driver usbfs [ 8.262843] usbcore: registered new interface driver hub [ 8.267547] usbcore: registered new device driver usb [ 8.287256] USB Universal Host Controller Interface driver v3.0 [ 8.287348] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 8.287364] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 8.287368] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.287857] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 8.287885] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 8.288058] usb usb1: configuration #1 chosen from 1 choice [ 8.288088] hub 1-0:1.0: USB hub found [ 8.288095] hub 1-0:1.0: 2 ports detected [ 8.391652] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 8.391660] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 8.391674] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 8.391679] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.391714] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 8.391739] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 8.391885] usb usb2: configuration #1 chosen from 1 choice [ 8.391923] hub 2-0:1.0: USB hub found [ 8.391929] hub 2-0:1.0: 2 ports detected [ 8.423321] SCSI subsystem initialized [ 8.495588] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 8.495595] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 8.495610] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 8.495615] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.495646] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 8.495671] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 8.495820] usb usb3: configuration #1 chosen from 1 choice [ 8.495849] hub 3-0:1.0: USB hub found [ 8.495856] hub 3-0:1.0: 2 ports detected [ 8.506229] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 8.506236] Copyright (c) 1999-2006 Intel Corporation. [ 8.530891] libata version 3.00 loaded. [ 8.600327] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 8.600335] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 8.600351] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 8.600356] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.600394] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 8.604308] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.604315] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 8.604324] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 [ 8.618782] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 8.618952] usb usb4: configuration #1 chosen from 1 choice [ 8.618983] hub 4-0:1.0: USB hub found [ 8.618992] hub 4-0:1.0: 6 ports detected [ 8.670003] Floppy drive(s): fd0 is 1.44M [ 8.689760] FDC 0 is a National Semiconductor PC87306 [ 8.722897] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 8.976766] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:60:ee:90 [ 9.016606] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 9.016754] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 9.016765] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 9.016813] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 9.016827] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 9.028195] ata_piix 0000:00:1f.1: version 2.12 [ 9.028217] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 9.028261] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 9.028925] scsi0 : ata_piix [ 9.029512] scsi1 : ata_piix [ 9.030572] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 9.030576] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 9.236102] ata1.00: ATA-7: WDC WD1200VE-00KWT0, 01.03K01, max UDMA/100 [ 9.236109] ata1.00: 234441648 sectors, multi 16: LBA48 [ 9.250362] ata1.00: configured for UDMA/100 [ 9.377803] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 9.548231] usb 2-1: configuration #1 chosen from 1 choice [ 9.573891] usbcore: registered new interface driver hiddev [ 9.588511] input: USB Optical Wheel Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2 [ 9.597531] input,hidraw0: USB HID v1.10 Mouse [USB Optical Wheel Mouse] on usb-0000:00:1d.1-1 [ 9.597551] usbcore: registered new interface driver usbhid [ 9.597555] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 9.725948] ata2.00: ATAPI: UJDA755zDVD/CDRW, 1.24, max UDMA/33 [ 9.897672] ata2.00: configured for UDMA/33 [ 9.897837] scsi 0:0:0:0: Direct-Access ATA WDC WD1200VE-00K 01.0 PQ: 0 ANSI: 5 [ 9.900662] scsi 1:0:0:0: CD-ROM MATSHITA UJDA755zDVD/CDRW 1.24 PQ: 0 ANSI: 5 [ 9.911909] Driver 'sd' needs updating - please use bus_type methods [ 9.912017] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 9.912033] sd 0:0:0:0: [sda] Write Protect is off [ 9.912037] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.912055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.912113] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 9.912124] sd 0:0:0:0: [sda] Write Protect is off [ 9.912127] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.912144] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.912148] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 9.964771] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 10.011780] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.019699] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.019727] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 10.025957] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 10.025965] Uniform CD-ROM driver Revision: 3.20 [ 10.026035] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 10.632971] Attempting manual resume [ 10.632977] swsusp: Resume From Partition 8:7 [ 10.632979] PM: Checking swsusp image. [ 10.633160] PM: Resume from disk failed. [ 10.696731] kjournald starting. Commit interval 5 seconds [ 10.696747] EXT3-fs: mounted filesystem with ordered data mode. [ 22.644404] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 23.359459] Linux agpgart interface v0.102 [ 23.411356] Non-volatile memory driver v1.2 [ 23.479244] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 23.527213] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.587052] iTCO_vendor_support: vendor-support=0 [ 23.658959] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 23.659067] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 23.659103] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.718977] parport_pc 00:0b: reported by Plug and Play ACPI [ 23.719030] parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 23.854698] irda_init() [ 23.854722] NET: Registered protocol family 23 [ 24.042513] agpgart: Detected an Intel 855PM Chipset. [ 24.056095] agpgart: AGP aperture is 256M @ 0xd0000000 [ 24.118550] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 24.118556] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 24.118559] thinkpad_acpi: ThinkPad BIOS 1RETDPWW (3.21 ), EC 1RHT71WW-3.04 [ 24.118561] thinkpad_acpi: IBM ThinkPad T40 [ 24.122859] thinkpad_acpi: another device driver is already handling bay events [ 24.122864] thinkpad_acpi: disabling subdriver bay [ 24.125028] input: ThinkPad Extra Buttons as /devices/virtual/input/input4 [ 24.250164] intel_rng: FWH not detected [ 24.283525] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 24.283686] nsc-ircc, chip->init [ 24.283697] nsc-ircc, Found chip at base=0x02e [ 24.283721] nsc-ircc, driver loaded (Dag Brattli) [ 24.283729] nsc_ircc_open(), can't get iobase of 0x2f8 [ 24.283757] nsc-ircc, Found chip at base=0x02e [ 24.283780] nsc-ircc, driver loaded (Dag Brattli) [ 24.283784] nsc_ircc_open(), can't get iobase of 0x2f8 [ 24.284376] nsc-ircc 00:0c: disabled [ 24.421420] input: Power Button (FF) as /devices/virtual/input/input5 [ 24.445953] ACPI: Power Button (FF) [PWRF] [ 24.446044] input: Lid Switch as /devices/virtual/input/input6 [ 24.458114] ACPI: Lid Switch [LID] [ 24.458183] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 24.485894] ACPI: Sleep Button (CM) [SLPB] [ 25.869512] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/LNXVIDEO:00/input/input8 [ 25.896049] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 26.123888] rsrc_nonstatic: Unknown symbol release_cis_mem [ 26.123993] rsrc_nonstatic: Unknown symbol pcmcia_socket_list [ 26.124158] rsrc_nonstatic: Unknown symbol pccard_validate_cis [ 26.124233] rsrc_nonstatic: Unknown symbol destroy_cis_cache [ 26.124469] rsrc_nonstatic: Unknown symbol pcmcia_socket_list_rwsem [ 26.124607] rsrc_nonstatic: Unknown symbol pcmcia_socket_class [ 26.125965] yenta_socket: Unknown symbol dead_socket [ 26.126078] yenta_socket: Unknown symbol pcmcia_register_socket [ 26.126317] yenta_socket: Unknown symbol pcmcia_socket_dev_resume [ 26.126408] yenta_socket: Unknown symbol pcmcia_parse_events [ 26.126635] yenta_socket: Unknown symbol pcmcia_socket_dev_suspend [ 26.126882] yenta_socket: Unknown symbol pccard_nonstatic_ops [ 26.127181] yenta_socket: Unknown symbol pcmcia_unregister_socket [ 26.157007] airo(): Probing for PCI adapters [ 26.158726] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 26.158745] airo(): Found an MPI350 card [ 26.871340] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 26.871351] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 26.914320] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 26.934737] ACPI: AC Adapter [AC] (on-line) [ 27.076548] ACPI: Battery Slot [BAT0] (battery present) [ 27.480346] padlock: VIA PadLock not detected. [ 32.491494] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 32.724633] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10 [ 202.682911] lp0: using parport0 (interrupt-driven). [ 202.833354] Adding 1951856k swap on /dev/sda7. Priority:-1 extents:1 across:1951856k [ 203.695343] EXT3 FS on sda1, internal journal [ 222.734935] kjournald starting. Commit interval 5 seconds [ 222.735164] EXT3 FS on sda6, internal journal [ 222.735169] EXT3-fs: mounted filesystem with ordered data mode. [ 222.784358] kjournald starting. Commit interval 5 seconds [ 222.784577] EXT3 FS on sda2, internal journal [ 222.784581] EXT3-fs: mounted filesystem with ordered data mode. [ 222.830495] kjournald starting. Commit interval 5 seconds [ 222.830720] EXT3 FS on sda5, internal journal [ 222.830723] EXT3-fs: mounted filesystem with ordered data mode. [ 223.565613] ip_tables: (C) 2000-2006 Netfilter Core Team [ 224.039520] ACPI: ACPI Dock Station Driver [ 224.126808] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 224.126816] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 224.126877] ACPI: Error installing bay notify handler [ 224.126882] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 225.559691] ttyS1: LSR safety check engaged! [ 227.405371] ppdev: user-space parallel port driver [ 227.855711] audit(1208102453.419:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5562 profile="/usr/sbin/cupsd" namespace="default" [ 227.919123] IBM machine detected. Enabling interrupts during APM calls. [ 227.919131] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 227.919134] apm: overridden by ACPI. [ 428.737218] Marking TSC unstable due to: cpufreq changes. [ 428.744641] Time: acpi_pm clocksource has been installed. [ 428.767203] [drm] Initialized drm 1.1.0 20060810 [ 571.807501] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 571.808055] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 572.309116] Bluetooth: Core ver 2.11 [ 572.311180] NET: Registered protocol family 31 [ 572.311189] Bluetooth: HCI device and connection manager initialized [ 572.311199] Bluetooth: HCI socket layer initialized [ 572.321994] Clocksource tsc unstable (delta = -214472193 ns) [ 572.350050] Bluetooth: L2CAP ver 2.9 [ 572.350060] Bluetooth: L2CAP socket layer initialized [ 228.720137] Bluetooth: RFCOMM socket layer initialized [ 228.720656] Bluetooth: RFCOMM TTY layer initialized [ 228.720659] Bluetooth: RFCOMM ver 1.8 [ 344.920581] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 344.921429] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 344.922209] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 576.379663] [drm] Setting GART location based on new memory map [ 576.379733] [drm] writeback test succeeded in 1 usecs