RFIM and SAGV Linux Support for G10 models

[Hui Wang]

BugLink: https://bugs.launchpad.net/bugs/2070158

[Impact]
This is a feature request from HP, RFIM is for frequency, SAGV is for voltage.
They are used as dynamic switching to reduce RF noise. RFIM is already
supported in the kernel, this patchset adds the SAGV feature.

[Fix]
Cherry-pick 6 commits from mainline kernel

[Test]
Enable the SAGV from the BIOS, booting with the patched kernel, after booting
up, run 'systemctl status dtt.service', we will get: service is enabled and
service is running
run 'cat /sys/kernel/debug/dri/0000:00:02.0/i915_sagv_status', we will get:
SAGV available: Yes
SAGV status: enabled

[Where problems could occur]
Because the fix is for i915, it is likely introduce regression on graphic,
but this possibility is very low. These 6 commits are merged to
mainline kernel from v6.10-rc1, so far there is no regression reported
on them. And we tested the patched kernel on different Intel machines, all
worked well.

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-oem-6.5/6.5.0-1026.27 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy-linux-oem-6.5' to 'verification-done-jammy-linux-oem-6.5'. If the problem still exists, change the tag 'verification-needed-jammy-linux-oem-6.5' to 'verification-failed-jammy-linux-oem-6.5'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux/6.8.0-40.40 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-noble-linux' to 'verification-done-noble-linux'. If the problem still exists, change the tag 'verification-needed-noble-linux' to 'verification-failed-noble-linux'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Launchpad Janitor (janitor)]

This bug was fixed in the package linux-oem-6.5 - 6.5.0-1027.28

---------------
linux-oem-6.5 (6.5.0-1027.28) jammy; urgency=medium

  * jammy/linux-oem-6.5: 6.5.0-1027.28 -proposed tracker (LP: #2073849)

  * Packaging resync (LP: #1786013)
    - debian.oem/dkms-versions -- manual update for ipu6

 -- Kuan-Ying Lee <email address hidden> Wed, 24 Jul 2024 09:56:23 +0800

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-ibm-gt-tdx/6.8.0-1009.10+tdx1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-noble-linux-ibm-gt-tdx' to 'verification-done-noble-linux-ibm-gt-tdx'. If the problem still exists, change the tag 'verification-needed-noble-linux-ibm-gt-tdx' to 'verification-failed-noble-linux-ibm-gt-tdx'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Launchpad Janitor (janitor)]

This bug was fixed in the package linux - 6.8.0-40.40

---------------
linux (6.8.0-40.40) noble; urgency=medium

  * noble/linux: 6.8.0-40.40 -proposed tracker (LP: #2072201)

  * FPS of glxgear with fullscreen is too low on MTL platform (LP: #2069380)
    - drm/i915: Bypass LMEMBAR/GTTMMADR for MTL stolen memory access

  * a critical typo in the code managing the ASPM settings for PCI Express
    devices (LP: #2071889)
    - PCI/ASPM: Restore parent state to parent, child state to child

  * [UBUNTU 24.04] IOMMU DMA mode changed in kernel config causes massive
    throughput degradation for PCI-related network workloads (LP: #2071471)
    - [Config] Set IOMMU_DEFAULT_DMA_STRICT=n and IOMMU_DEFAULT_DMA_LAZY=yes for
      s390x

  * UBSAN: array-index-out-of-bounds in
    /build/linux-D15vQj/linux-6.5.0/drivers/md/bcache/bset.c:1098:3
    (LP: #2039368)
    - bcache: fix variable length array abuse in btree_iter

  * Mute/mic LEDs and speaker no function on EliteBook 645/665 G11
    (LP: #2071296)
    - ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665
      G11.

  * failed to enable IPU6 camera sensor on kernel >= 6.8: ivsc_ace
    intel_vsc-5db76cf6-0a68-4ed6-9b78-0361635e2447: switch camera to host
    failed: -110 (LP: #2067364)
    - mei: vsc: Don't stop/restart mei device during system suspend/resume
    - SAUCE: media: ivsc: csi: don't count privacy on as error
    - SAUCE: media: ivsc: csi: add separate lock for v4l2 control handler
    - SAUCE: media: ivsc: csi: remove privacy status in struct mei_csi
    - SAUCE: mei: vsc: Enhance IVSC chipset stability during warm reboot
    - SAUCE: mei: vsc: Enhance SPI transfer of IVSC rom
    - SAUCE: mei: vsc: Utilize the appropriate byte order swap function
    - SAUCE: mei: vsc: Prevent timeout error with added delay post-firmware
      download

  * failed to probe camera sensor on Dell XPS 9315: ov01a10 i2c-OVTI01A0:00:
    failed to check hwcfg: -22 (LP: #2070251)
    - ACPI: utils: Make acpi_handle_path() not static
    - ACPI: property: Ignore bad graph port nodes on Dell XPS 9315
    - ACPI: property: Polish ignoring bad data nodes
    - ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and
      Raptor Lake models

  * Update amd_sfh for AMD strix series (LP: #2058331)
    - HID: amd_sfh: Increase sensor command timeout
    - HID: amd_sfh: Improve boot time when SFH is available
    - HID: amd_sfh: Extend MP2 register access to SFH
    - HID: amd_sfh: Set the AMD SFH driver to depend on x86

  * RFIM and SAGV Linux Support for G10 models (LP: #2070158)
    - drm/i915/display: Add meaningful traces for QGV point info error handling
    - drm/i915/display: Extract code required to calculate max qgv/psf gv point
    - drm/i915/display: extract code to prepare qgv points mask
    - drm/i915/display: Disable SAGV on bw init, to force QGV point recalculation
    - drm/i915/display: handle systems with duplicate psf gv points
    - drm/i915/display: force qgv check after the hw state readout

  * Update amd-pmf for AMD strix series (LP: #2058330)
    - platform/x86/amd/pmf: Differentiate PMF ACPI versions
    - platform/x86/amd/pmf: Disable debugf...

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-azure/6.8.0-1012.14 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-noble-linux-azure' to 'verification-done-noble-linux-azure'. If the problem still exists, change the tag 'verification-needed-noble-linux-azure' to 'verification-failed-noble-linux-azure'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-raspi/6.8.0-1009.10 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-noble-linux-raspi' to 'verification-done-noble-linux-raspi'. If the problem still exists, change the tag 'verification-needed-noble-linux-raspi' to 'verification-failed-noble-linux-raspi'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-riscv-6.8/6.8.0-40.40.1~22.04.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy-linux-riscv-6.8' to 'verification-done-jammy-linux-riscv-6.8'. If the problem still exists, change the tag 'verification-needed-jammy-linux-riscv-6.8' to 'verification-failed-jammy-linux-riscv-6.8'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-raspi-realtime/6.8.0-2008.8 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-noble-linux-raspi-realtime' to 'verification-done-noble-linux-raspi-realtime'. If the problem still exists, change the tag 'verification-needed-noble-linux-raspi-realtime' to 'verification-failed-noble-linux-raspi-realtime'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-lowlatency/6.8.0-40.40.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-noble-linux-lowlatency' to 'verification-done-noble-linux-lowlatency'. If the problem still exists, change the tag 'verification-needed-noble-linux-lowlatency' to 'verification-failed-noble-linux-lowlatency'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-ibm-6.8/6.8.0-1010.10~22.04.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy-linux-ibm-6.8' to 'verification-done-jammy-linux-ibm-6.8'. If the problem still exists, change the tag 'verification-needed-jammy-linux-ibm-6.8' to 'verification-failed-jammy-linux-ibm-6.8'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is awaiting verification that the linux-lowlatency-hwe-6.8/6.8.0-40.40.1~22.04.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy-linux-lowlatency-hwe-6.8' to 'verification-done-jammy-linux-lowlatency-hwe-6.8'. If the problem still exists, change the tag 'verification-needed-jammy-linux-lowlatency-hwe-6.8' to 'verification-failed-jammy-linux-lowlatency-hwe-6.8'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!