[Hardy] DMA not enabled on cdrom drive
Bug #205817 reported by
Scott Beamer
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Won't Fix
|
Medium
|
Unassigned |
Bug Description
Binary package hint: linux-source-2.6.24
When I launched k3b today it informed me that DMA was disabled on one of my DVD drives (Pioneer DVR-111C). This has not been a problem in the past. It was always enabled by default on this drive (as well as my other TSSTCorp DVD Drive).
I had to manually enable it.
This should not be the case.
Changed in linux: | |
assignee: | nobody → ubuntu-kernel-team |
importance: | Undecided → Medium |
status: | New → Triaged |
To post a comment you must log in.
I can confirm this BUG.
Also only occurs with one of my DVD drives (PIONEER DVD-RW DVR-109).
$ sudo hdparm -iI /dev/hda
/dev/hda:
Model=PIONEER DVD-RW DVR-109, FwRev=1.58, SerialNo= 240,w/IORDY: 120}, tDMA={min: 120,rec: 120}
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=13395, BuffSize=64kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no
Drive conforms to: Unspecified: ATA/ATAPI-2,3,4,5
* signifies the current active mode
ATAPI CD-ROM, with removable media
Model Number: PIONEER DVD-RW DVR-109
Serial Number: EADL079007WL
Firmware Revision: 1.58
Standards:
Likely used CD-ROM ATAPI-1
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 64.0kB
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* Power Management feature set
* PACKET command feature set
* DEVICE_RESET command
HW reset results:
CBLID- below Vih
Device num = 0 determined by the jumper
$ dmesg | grep hda
[ 13.497220] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA speed_status: status=0x51 { DriveReady SeekComplete Error } speed_status: error=0x04 { AbortedCommand }
[ 15.069713] hda: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive
[ 15.069722] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 15.069769] hda: UDMA/33 mode selected
[ 15.069844] hda: set_drive_
[ 15.069848] hda: set_drive_
[ 15.069853] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 16.402337] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[ 6900.970192] hda: drive_cmd: status=0x01 { Error }
[ 6900.970201] hda: drive_cmd: error=0x04 { AbortedCommand }