[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004fea0000 (usable) [ 0.000000] BIOS-e820: 000000004fea0000 - 000000004feae000 (ACPI data) [ 0.000000] BIOS-e820: 000000004feae000 - 000000004ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000004ff00000 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 382MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6df0 [ 0.000000] Entering add_active_range(0, 0, 327328) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 327328 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 327328 [ 0.000000] On node 0 totalpages: 327328 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 765 pages used for memmap [ 0.000000] HighMem zone: 97187 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6DB0 checksum 0 [ 0.000000] ACPI: RSDP 000F6DB0, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 4FEA81CE, 0034 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 4FEADE41, 0074 (r1 ATI Piranha 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 4FEA8202, 5C3F (r1 ATI SB400 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 4FEAEFC0, 0040 [ 0.000000] ACPI: SSDT 4FEADEB5, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 4FEADF6A, 005A (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG 4FEADFC4, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: DMI detected: Acer [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 324771 [ 0.000000] Kernel command line: root=UUID=79a6136b-37c4-46ec-a2aa-aec162c5f957 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1600.062 MHz processor. [ 13.435958] Console: colour VGA+ 80x25 [ 13.435962] console [tty0] enabled [ 13.436694] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 13.437262] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 13.485959] Memory: 1285580k/1309312k available (2157k kernel code, 22428k reserved, 998k data, 364k init, 391808k highmem) [ 13.485968] virtual kernel memory layout: [ 13.485970] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 13.485971] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 13.485972] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 13.485974] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 13.485975] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 13.485977] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 13.485978] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 13.485981] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 13.486032] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 13.565940] Calibrating delay using timer specific routine.. 3203.58 BogoMIPS (lpj=6407162) [ 13.565976] Security Framework initialized [ 13.565985] SELinux: Disabled at boot. [ 13.566006] AppArmor: AppArmor initialized [ 13.566011] Failure registering capabilities with primary security module. [ 13.566021] Mount-cache hash table entries: 512 [ 13.566178] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000 [ 13.566188] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 13.566191] CPU: L2 Cache: 1024K (64 bytes/line) [ 13.566194] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000 [ 13.566208] Compat vDSO mapped to ffffe000. [ 13.566223] Checking 'hlt' instruction... OK. [ 13.582264] SMP alternatives: switching to UP code [ 13.583594] Freeing SMP alternatives: 11k freed [ 13.583723] Early unpacking initramfs... done [ 13.963606] ACPI: Core revision 20070126 [ 13.963680] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.968667] CPU0: AMD Turion(tm) 64 Mobile Technology ML-30 stepping 02 [ 13.968689] Total of 1 processors activated (3203.58 BogoMIPS). [ 13.968859] ENABLING IO-APIC IRQs [ 13.969044] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 14.008716] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 14.008767] ...trying to set up timer (IRQ0) through the 8259A ... failed. [ 14.008770] ...trying to set up timer as Virtual Wire IRQ... works. [ 14.153118] Brought up 1 CPUs [ 14.153141] CPU0 attaching sched-domain: [ 14.153143] domain 0: span 01 [ 14.153145] groups: 01 [ 14.153307] net_namespace: 64 bytes [ 14.153313] Booting paravirtualized kernel on bare hardware [ 14.153828] Time: 13:18:35 Date: 04/26/08 [ 14.153851] NET: Registered protocol family 16 [ 14.154023] EISA bus registered [ 14.154052] ACPI: bus type pci registered [ 14.166656] PCI: PCI BIOS revision 2.10 entry at 0xfd63c, last bus=6 [ 14.166659] PCI: Using configuration type 1 [ 14.166661] Setting up standard PCI resources [ 14.168430] ACPI: EC: Look up EC in DSDT [ 14.170078] ACPI: Interpreter enabled [ 14.170081] ACPI: (supports S0 S3 S4 S5) [ 14.170093] ACPI: Using IOAPIC for interrupt routing [ 14.172412] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 14.206993] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 14.206996] ACPI: EC: driver started in interrupt mode [ 14.207033] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.208755] PCI: Transparent bridge - 0000:00:14.4 [ 14.208838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.208980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 14.209110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 14.209224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 14.209340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 14.212471] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 14.212588] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 14.212702] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 14.212818] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 14.212932] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 14.213051] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 14.213165] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 14.213280] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 14.213393] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.213420] pnp: PnP ACPI init [ 14.213426] ACPI: bus type pnp registered [ 14.222068] pnp: PnP ACPI: found 11 devices [ 14.222071] ACPI: ACPI bus type pnp unregistered [ 14.222074] PnPBIOS: Disabled by ACPI PNP [ 14.222263] PCI: Using ACPI for IRQ routing [ 14.222265] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.222271] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0 [ 14.222274] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0 [ 14.222276] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0 [ 14.222279] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0 [ 14.256921] NET: Registered protocol family 8 [ 14.256923] NET: Registered protocol family 20 [ 14.256982] AppArmor: AppArmor Filesystem Enabled [ 14.260909] Time: tsc clocksource has been installed. [ 14.268929] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 14.268932] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 14.268936] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 14.268944] system 00:08: ioport range 0x1080-0x1080 has been reserved [ 14.268947] system 00:08: ioport range 0x1200-0x120f has been reserved [ 14.268950] system 00:08: ioport range 0x500-0x51f has been reserved [ 14.268953] system 00:08: ioport range 0x40b-0x40b has been reserved [ 14.268956] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 14.268959] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 14.268962] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 14.268965] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 14.268968] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 14.268971] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 14.268974] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 14.268977] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 14.268980] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 14.268983] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 14.268986] system 00:08: ioport range 0x8000-0x805f has been reserved [ 14.268989] system 00:08: ioport range 0xf40-0xf47 has been reserved [ 14.268992] system 00:08: ioport range 0x87f-0x87f has been reserved [ 14.268999] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 14.269002] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 14.269005] system 00:09: iomem range 0x0-0xfff could not be reserved [ 14.299330] PCI: Bridge: 0000:00:02.0 [ 14.299333] IO window: 9000-9fff [ 14.299336] MEM window: c0100000-c01fffff [ 14.299339] PREFETCH window: c8000000-cfffffff [ 14.299342] PCI: Bridge: 0000:00:06.0 [ 14.299344] IO window: disabled. [ 14.299346] MEM window: disabled. [ 14.299349] PREFETCH window: disabled. [ 14.299352] PCI: Bridge: 0000:00:07.0 [ 14.299353] IO window: disabled. [ 14.299356] MEM window: disabled. [ 14.299358] PREFETCH window: disabled. [ 14.299370] PCI: Bus 7, cardbus bridge: 0000:06:06.0 [ 14.299372] IO window: 0000a400-0000a4ff [ 14.299378] IO window: 0000a800-0000a8ff [ 14.299384] PREFETCH window: 60000000-63ffffff [ 14.299389] MEM window: 64000000-67ffffff [ 14.299395] PCI: Bridge: 0000:00:14.4 [ 14.299399] IO window: a000-afff [ 14.299405] MEM window: c0200000-c02fffff [ 14.299410] PREFETCH window: disabled. [ 14.299425] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 14.299434] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 14.299442] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 14.299469] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 14.299484] NET: Registered protocol family 2 [ 14.336871] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 14.337186] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.338384] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 14.339062] TCP: Hash tables configured (established 131072 bind 65536) [ 14.339065] TCP reno registered [ 14.348942] checking if image is initramfs... it is [ 14.800100] Switched to high resolution mode on CPU 0 [ 15.082781] Freeing initrd memory: 7273k freed [ 15.083406] audit: initializing netlink socket (disabled) [ 15.083422] audit(1209215915.456:1): initialized [ 15.083583] highmem bounce pool size: 64 pages [ 15.085339] VFS: Disk quotas dquot_6.5.1 [ 15.085409] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 15.085537] io scheduler noop registered [ 15.085540] io scheduler anticipatory registered [ 15.085542] io scheduler deadline registered [ 15.085557] io scheduler cfq registered (default) [ 15.085563] PCI: MSI quirk detected. MSI deactivated. [ 15.518937] Boot video device is 0000:01:00.0 [ 15.519036] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 15.519058] assign_interrupt_mode Found MSI capability [ 15.519061] Allocate Port Service[0000:00:02.0:pcie00] [ 15.519119] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 15.519141] assign_interrupt_mode Found MSI capability [ 15.519143] Allocate Port Service[0000:00:06.0:pcie00] [ 15.519199] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 15.519220] assign_interrupt_mode Found MSI capability [ 15.519222] Allocate Port Service[0000:00:07.0:pcie00] [ 15.519419] isapnp: Scanning for PnP cards... [ 15.873640] isapnp: No Plug & Play device found [ 15.900345] Real Time Clock Driver v1.12ac [ 15.900441] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 15.900671] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 15.901055] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 15.901065] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 15.901645] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 15.901709] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 15.901801] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 15.902121] i8042.c: Detected active multiplexing controller, rev 1.1. [ 15.902197] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.902202] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 15.902204] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 15.902207] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 15.902210] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 15.910405] mice: PS/2 mouse device common for all mice [ 15.910504] EISA: Probing bus 0 at eisa.0 [ 15.910513] Cannot allocate resource for EISA slot 1 [ 15.910543] Cannot allocate resource for EISA slot 8 [ 15.910545] EISA: Detected 0 cards. [ 15.910549] cpuidle: using governor ladder [ 15.910551] cpuidle: using governor menu [ 15.910643] NET: Registered protocol family 1 [ 15.910668] Using IPI No-Shortcut mode [ 15.910701] registered taskstats version 1 [ 15.910825] Magic number: 4:590:332 [ 15.911001] hash matches device tty53 [ 15.911043] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 15.911046] EDD information not available. [ 15.911517] Freeing unused kernel memory: 364k freed [ 15.914218] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 17.203251] SCSI subsystem initialized [ 17.210028] libata version 3.00 loaded. [ 17.211416] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18 [ 17.211471] PCI: Setting latency timer of device 0000:00:14.1 to 64 [ 17.211540] scsi0 : pata_atiixp [ 17.211604] scsi1 : pata_atiixp [ 17.212722] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14 [ 17.212725] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15 [ 17.376786] ata1.00: ATA-6: IC25N080ATMR04-0, MO4OAD4A, max UDMA/100 [ 17.376789] ata1.00: 156301488 sectors, multi 16: LBA48 [ 17.392710] ata1.00: configured for UDMA/100 [ 17.751973] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L532A, TI51, max UDMA/33 [ 17.939661] ata2.00: configured for UDMA/33 [ 17.939758] scsi 0:0:0:0: Direct-Access ATA IC25N080ATMR04-0 MO4O PQ: 0 ANSI: 5 [ 17.943727] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L532A TI51 PQ: 0 ANSI: 5 [ 17.969356] fuse init (API version 7.9) [ 17.994693] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 18.045593] ACPI: Thermal Zone [TZS0] (56 C) [ 18.094742] ACPI: Thermal Zone [TZS1] (44 C) [ 18.143347] ACPI: Thermal Zone [TZSV] (47 C) [ 18.901633] usbcore: registered new interface driver usbfs [ 18.901663] usbcore: registered new interface driver hub [ 18.907359] usbcore: registered new device driver usb [ 18.922008] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 18.922062] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 18.922076] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 18.922337] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 18.922359] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000 [ 18.981574] usb usb1: configuration #1 chosen from 1 choice [ 18.981600] hub 1-0:1.0: USB hub found [ 18.981611] hub 1-0:1.0: 4 ports detected [ 19.085382] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.085399] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 19.085426] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 19.085444] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000 [ 19.145319] usb usb2: configuration #1 chosen from 1 choice [ 19.145353] hub 2-0:1.0: USB hub found [ 19.145364] hub 2-0:1.0: 4 ports detected [ 19.249257] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.249275] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 19.249306] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 19.249366] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000 [ 19.260998] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.261157] usb usb3: configuration #1 chosen from 1 choice [ 19.261182] hub 3-0:1.0: USB hub found [ 19.261189] hub 3-0:1.0: 8 ports detected [ 19.367260] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 19.424805] ssb: Sonics Silicon Backplane found on PCI device 0000:06:05.0 [ 19.424915] r8169 Gigabit Ethernet driver 2.2LK loaded [ 19.424944] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 19.425219] eth0: RTL8169sb/8110sb at 0xf8848400, 00:0a:e4:e8:c9:60, XID 10000000 IRQ 20 [ 19.426048] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 19.475788] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 19.490382] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.490388] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.503612] Driver 'sd' needs updating - please use bus_type methods [ 19.503703] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 19.503716] sd 0:0:0:0: [sda] Write Protect is off [ 19.503719] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.503735] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.503782] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 19.503791] sd 0:0:0:0: [sda] Write Protect is off [ 19.503793] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.503808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.503811] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 19.532217] sda1 sda2 [ 19.568899] sd 0:0:0:0: [sda] Attached SCSI disk [ 19.576008] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 19.576029] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 19.609916] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 19.609922] Uniform CD-ROM driver Revision: 3.20 [ 19.609980] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 20.023821] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 20.232623] usb 2-2: configuration #1 chosen from 1 choice [ 20.252071] usbcore: registered new interface driver hiddev [ 20.255651] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2:1.0/input/input2 [ 20.267464] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-2 [ 20.267484] usbcore: registered new interface driver usbhid [ 20.267489] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 20.389887] Attempting manual resume [ 20.389892] swsusp: Resume From Partition 8:2 [ 20.389894] PM: Checking swsusp image. [ 20.390071] PM: Resume from disk failed. [ 20.458607] kjournald starting. Commit interval 5 seconds [ 20.458620] EXT3-fs: mounted filesystem with ordered data mode. [ 20.750759] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1234567812345678] [ 37.180670] Linux agpgart interface v0.102 [ 37.312464] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 37.364830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.640689] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 37.672031] input: Power Button (FF) as /devices/virtual/input/input3 [ 37.683839] ACPI: Power Button (FF) [PWRF] [ 37.683937] input: Lid Switch as /devices/virtual/input/input4 [ 37.691877] ACPI: Lid Switch [LID0] [ 37.691941] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 37.707796] ACPI: Sleep Button (CM) [SLPB] [ 38.023433] ACPI: WMI-Acer: Mapper loaded [ 39.113243] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:10/LNXVIDEO:00/input/input6 [ 39.121558] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 39.122029] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/LNXVIDEO:01/input/input7 [ 39.137530] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 39.632860] ACPI: AC Adapter [ADP1] (on-line) [ 39.927572] ACPI: Battery Slot [BAT0] (battery present) [ 40.061684] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080] [ 40.061712] Yenta: Using CSCINT to route CSC interrupts to PCI [ 40.061715] Yenta: Routing CardBus interrupts to PCI [ 40.061722] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64 [ 40.292559] Yenta: ISA IRQ mask 0x0ef8, PCI irq 16 [ 40.292566] Socket status: 30000006 [ 40.292569] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08 [ 40.292576] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 40.292579] cs: IO port probe 0xa000-0xafff: clean. [ 40.292820] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff [ 40.299340] sdhci: Secure Digital Host Controller Interface driver [ 40.299343] sdhci: Copyright(c) Pierre Ossman [ 40.337176] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 20 (level, low) -> IRQ 16 [ 40.337261] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0) [ 40.337282] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level, low) -> IRQ 16 [ 40.337298] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 40.337338] mmc0: SDHCI at 0xc0209000 irq 16 DMA [ 40.337351] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it. [ 40.337382] mmc1: SDHCI at 0xc0208c00 irq 16 DMA [ 40.337394] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it. [ 40.337421] mmc2: SDHCI at 0xc0208800 irq 16 DMA [ 40.998735] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 41.346099] b43-phy0: Broadcom 4318 WLAN found [ 41.454199] phy0: Selected rate control algorithm 'simple' [ 41.858787] irda_init() [ 41.858809] NET: Registered protocol family 23 [ 41.881194] acer_acpi: Acer Laptop ACPI Extras version 0.11.1 [ 41.881204] acer_acpi: Detected Acer AMW0 version 2 interface [ 41.882771] Registered led device: acer_acpi:mail [ 42.274819] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 42.520895] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 42.550894] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9 [ 42.578583] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 42.578622] nsc-ircc, chip->init [ 42.578637] nsc-ircc, Found chip at base=0x02e [ 42.578680] nsc-ircc, driver loaded (Dag Brattli) [ 42.578686] nsc_ircc_open(), can't get iobase of 0x2f8 [ 42.578735] nsc-ircc, Found chip at base=0x02e [ 42.578777] nsc-ircc, driver loaded (Dag Brattli) [ 42.578779] nsc_ircc_open(), can't get iobase of 0x2f8 [ 42.579015] nsc-ircc 00:0a: disabled [ 42.789144] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 42.899636] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ac97/ac97_codec.c:2160: MC'97 1 converters and GPIO not ready (0xff00) [ 43.609811] udev: renamed network interface wlan0 to eth1 [ 43.894099] cs: IO port probe 0x100-0x3af: clean. [ 43.896537] cs: IO port probe 0x3e0-0x4ff: clean. [ 43.897525] cs: IO port probe 0x820-0x8ff: clean. [ 43.898350] cs: IO port probe 0xc00-0xcf7: clean. [ 43.899218] cs: IO port probe 0xa00-0xaff: clean. [ 44.270476] lp: driver loaded but no devices found [ 44.386154] input: Acer hotkey driver as /devices/virtual/input/input10 [ 44.423641] Acer Travelmate hotkey driver v0.5.34 [ 44.519686] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 44.596547] usbcore: registered new interface driver ndiswrapper [ 44.735196] Adding 2273188k swap on /dev/sda2. Priority:-1 extents:1 across:2273188k [ 45.288469] EXT3 FS on sda1, internal journal [ 47.222075] ip_tables: (C) 2000-2006 Netfilter Core Team [ 47.477790] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 47.477797] CIFS VFS: cifs_mount failed w/return code = -101 [ 48.075793] ACPI: ACPI Dock Station Driver [ 48.578723] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-30 processors (1 cpu cores) (version 2.20.00) [ 48.578759] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4 [ 48.578762] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16 [ 51.015629] ttyS1: LSR safety check engaged! [ 51.226971] r8169: eth0: link up [ 51.382318] input: b43-phy0 as /devices/virtual/input/input11 [ 52.853762] Registered led device: b43-phy0:tx [ 52.854358] Registered led device: b43-phy0:rx [ 52.854872] Registered led device: b43-phy0:radio [ 53.118018] ppdev: user-space parallel port driver [ 53.638786] audit(1209215954.557:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5331 profile="/usr/sbin/cupsd" namespace="default" [ 93.017399] [fglrx] Maximum main memory to use for locked dma buffers: 1170 MBytes. [ 93.017439] [fglrx] ASYNCIO init succeed! [ 93.017805] [fglrx] PAT is enabled successfully! [ 93.023374] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0 [ 96.499056] ttyS1: LSR safety check engaged! [ 97.501280] nsc-ircc 00:0a: activated [ 97.501288] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 97.511479] nsc-ircc, chip->init [ 97.511497] nsc-ircc, Found chip at base=0x02e [ 97.511541] nsc-ircc, driver loaded (Dag Brattli) [ 97.511548] nsc_ircc_open(), can't get iobase of 0x2f8 [ 97.511596] nsc-ircc, Found chip at base=0x02e [ 97.511639] nsc-ircc, driver loaded (Dag Brattli) [ 97.511641] nsc_ircc_open(), can't get iobase of 0x2f8 [ 97.522387] nsc-ircc 00:0a: disabled [ 97.966283] Bluetooth: Core ver 2.11 [ 98.000850] NET: Registered protocol family 31 [ 98.000855] Bluetooth: HCI device and connection manager initialized [ 98.000860] Bluetooth: HCI socket layer initialized [ 98.031824] Bluetooth: L2CAP ver 2.9 [ 98.031829] Bluetooth: L2CAP socket layer initialized [ 98.122176] Bluetooth: RFCOMM socket layer initialized [ 98.122817] Bluetooth: RFCOMM TTY layer initialized [ 98.122821] Bluetooth: RFCOMM ver 1.8 [ 99.378254] NET: Registered protocol family 10 [ 99.379096] lo: Disabled Privacy Extensions [ 99.380606] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 202.573131] Marking TSC unstable due to: cpufreq changes. [ 202.580898] Time: acpi_pm clocksource has been installed. [ 203.028588] Clocksource tsc unstable (delta = -227986595 ns) [ 203.390272] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 23 [ 204.419815] NET: Registered protocol family 17 [ 103.477251] ACPI: PCI interrupt for device 0000:06:05.0 disabled [ 103.652901] usbcore: deregistering interface driver ndiswrapper [ 103.700322] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 103.835797] ndiswrapper: driver bcmwl5a (Broadcom,12/22/2004, 3.100.46.0) loaded [ 103.836833] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 103.845952] ndiswrapper: using IRQ 21 [ 104.843622] eth1: ethernet device 00:14:a4:42:59:a1 using NDIS driver: bcmwl5a, version: 0x3642e00, NDIS version: 0x501, vendor: '', 14E4:4318.5.conf [ 104.843671] eth1: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 104.843730] usbcore: registered new interface driver ndiswrapper [ 104.847035] ndiswrapper: changing interface name from 'eth1' to 'eth1' [ 104.847115] udev: renamed network interface wlan0 to eth1 [ 104.868310] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 105.495643] [fglrx] Reserve Block - 0 offset = 0X3ff0000 length = 0X10000 [ 105.495650] [fglrx] Reserve Block - 1 offset = 0X3fef000 length = 0X1000 [ 105.495654] [fglrx] Reserve Block - 2 offset = 0X3fee000 length = 0X1000 [ 105.495657] [fglrx] Reserve Block - 3 offset = 0X0 length = 0X40000 [ 105.495660] [fglrx] Reserve Block - 4 offset = 0X3fae000 length = 0X40000 [ 105.659223] [fglrx] interrupt source 20008000 successfully enabled [ 105.659229] [fglrx] enable ID = 0x00000004 [ 105.659238] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 105.659317] [fglrx] interrupt source 10000000 successfully enabled [ 105.659320] [fglrx] enable ID = 0x00000005 [ 105.659324] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 219.351383] CIFS VFS: Error connecting to IPv4 socket. Aborting operation [ 219.351398] CIFS VFS: cifs_mount failed w/return code = -113 [ 223.224007] eth0: no IPv6 routers present