[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] Command line: root=UUID=3a68eba2-e7ec-46ef-87d6-a8a7f62ff475 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffb0000 (usable) [ 0.000000] BIOS-e820: 000000006ffb0000 - 000000006ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000006ffc0000 - 000000006fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fff0000 - 0000000070000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458672) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FACE0 checksum 0 [ 0.000000] ACPI: RSDP 000FACE0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 6FFB0000, 003C (r1 071807 RSDT1316 20070718 MSFT 97) [ 0.000000] ACPI: FACP 6FFB0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT 6FFB0440, 591B (r1 ASR29 ASR29141 141 INTL 20051117) [ 0.000000] ACPI: FACS 6FFC0000, 0040 [ 0.000000] ACPI: APIC 6FFB0390, 0070 (r1 071807 APIC1316 20070718 MSFT 97) [ 0.000000] ACPI: MCFG 6FFB0400, 003C (r1 071807 OEMMCFG 20070718 MSFT 97) [ 0.000000] ACPI: OEMB 6FFC0040, 0071 (r1 071807 OEMB1316 20070718 MSFT 97) [ 0.000000] ACPI: NVHD 6FFC00C0, 0554 (r1 071807 NVHDCP 20070718 MSFT 97) [ 0.000000] ACPI: SSDT 6FFB5D60, 01C4 (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000006ffb0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458672) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000006ffb0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 458672 [ 0.000000] On node 0 totalpages: 458575 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1208 pages reserved [ 0.000000] DMA zone: 2735 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6214 pages used for memmap [ 0.000000] DMA32 zone: 448362 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 70000000:8ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 451097 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=3a68eba2-e7ec-46ef-87d6-a8a7f62ff475 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 16.119106] Marking TSC unstable due to TSCs unsynchronized [ 16.119108] time.c: Detected 1895.359 MHz processor. [ 16.122367] Console: colour VGA+ 80x25 [ 16.122370] console [tty0] enabled [ 16.122387] Checking aperture... [ 16.122389] CPU 0: aperture @ 227e000000 size 32 MB [ 16.122391] Aperture too small (32 MB) [ 16.128466] No AGP bridge found [ 16.144031] Memory: 1796244k/1834688k available (2466k kernel code, 38056k reserved, 1309k data, 316k init) [ 16.144064] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 16.221046] Calibrating delay using timer specific routine.. 3794.69 BogoMIPS (lpj=7589391) [ 16.221077] Security Framework initialized [ 16.221082] SELinux: Disabled at boot. [ 16.221096] AppArmor: AppArmor initialized [ 16.221100] Failure registering capabilities with primary security module. [ 16.221264] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 16.222396] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.222927] Mount-cache hash table entries: 256 [ 16.223054] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.223057] CPU: L2 Cache: 512K (64 bytes/line) [ 16.223059] CPU 0/0 -> Node 0 [ 16.223061] CPU: Physical Processor ID: 0 [ 16.223063] CPU: Processor Core ID: 0 [ 16.223086] SMP alternatives: switching to UP code [ 16.223681] Early unpacking initramfs... done [ 16.563089] ACPI: Core revision 20070126 [ 16.563144] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.606344] Using local APIC timer interrupts. [ 16.659083] APIC timer calibration result 12469469 [ 16.659085] Detected 12.469 MHz APIC timer. [ 16.659194] SMP alternatives: switching to SMP code [ 16.659683] Booting processor 1/2 APIC 0x1 [ 16.670038] Initializing CPU#1 [ 16.747319] Calibrating delay using timer specific routine.. 3790.72 BogoMIPS (lpj=7581451) [ 16.747326] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.747328] CPU: L2 Cache: 512K (64 bytes/line) [ 16.747330] CPU 1/1 -> Node 0 [ 16.747332] CPU: Physical Processor ID: 0 [ 16.747333] CPU: Processor Core ID: 1 [ 16.747440] AMD Athlon(tm) X2 Dual Core Processor BE-2300 stepping 01 [ 16.747279] Brought up 2 CPUs [ 16.747394] CPU0 attaching sched-domain: [ 16.747397] domain 0: span 03 [ 16.747398] groups: 01 02 [ 16.747401] domain 1: span 03 [ 16.747403] groups: 03 [ 16.747405] CPU1 attaching sched-domain: [ 16.747406] domain 0: span 03 [ 16.747408] groups: 02 01 [ 16.747410] domain 1: span 03 [ 16.747412] groups: 03 [ 16.747642] net_namespace: 120 bytes [ 16.748095] Time: 14:49:09 Date: 04/22/08 [ 16.748128] NET: Registered protocol family 16 [ 16.748322] ACPI: bus type pci registered [ 16.748399] PCI: Using configuration type 1 [ 16.753463] ACPI: EC: Look up EC in DSDT [ 16.760059] ACPI: Interpreter enabled [ 16.760062] ACPI: (supports S0 S1 S3 S4 S5) [ 16.760077] ACPI: Using IOAPIC for interrupt routing [ 16.760331] Error attaching device data [ 16.760336] Error attaching device data [ 16.771085] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.771856] PCI: Transparent bridge - 0000:00:08.0 [ 16.772272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.772587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 16.772718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 16.772819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 16.772920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 16.773021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 16.773122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 16.773223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] [ 16.773324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR16._PRT] [ 16.790606] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 16 17 18 19) *0, disabled. [ 16.790858] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 16 17 18 19) *0, disabled. [ 16.791128] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 16 17 18 19) *0, disabled. [ 16.791379] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11 16 17 18 19) [ 16.791626] ACPI: PCI Interrupt Link [LNEA] (IRQs 5 7 10 11 16 17 18 19) *0, disabled. [ 16.791873] ACPI: PCI Interrupt Link [LNEB] (IRQs 5 7 10 11 16 17 18 19) *0, disabled. [ 16.792122] ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 11 16 17 18 19) *0, disabled. [ 16.792369] ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 10 11 16 17 18 19) *0, disabled. [ 16.792621] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11 [ 16.792870] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 16.793118] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 16.793368] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 16.793617] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10 [ 16.793866] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 16.794116] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 16.794365] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 16.794653] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 16.794903] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 16.795158] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 [ 16.795284] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - A0, should be 79 [20070126] [ 16.795294] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.795323] pnp: PnP ACPI init [ 16.795334] ACPI: bus type pnp registered [ 16.801559] pnp: PnP ACPI: found 14 devices [ 16.801562] ACPI: ACPI bus type pnp unregistered [ 16.801801] PCI: Using ACPI for IRQ routing [ 16.801804] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.811072] NET: Registered protocol family 8 [ 16.811074] NET: Registered protocol family 20 [ 16.811201] AppArmor: AppArmor Filesystem Enabled [ 16.823061] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 16.823064] system 00:07: ioport range 0x800-0x80f has been reserved [ 16.823067] system 00:07: ioport range 0x1000-0x107f has been reserved [ 16.823069] system 00:07: ioport range 0x1080-0x10ff has been reserved [ 16.823072] system 00:07: ioport range 0x1400-0x147f has been reserved [ 16.823074] system 00:07: ioport range 0x1480-0x14ff has been reserved [ 16.823077] system 00:07: ioport range 0x1800-0x187f has been reserved [ 16.823079] system 00:07: ioport range 0x1880-0x18ff has been reserved [ 16.823082] system 00:07: ioport range 0x1c00-0x1c7f has been reserved [ 16.823084] system 00:07: ioport range 0x1c80-0x1cff has been reserved [ 16.823087] system 00:07: iomem range 0x0-0x0 could not be reserved [ 16.823091] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 16.823094] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 16.823096] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved [ 16.823103] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 16.823106] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 16.823112] system 00:0b: ioport range 0x290-0x29f has been reserved [ 16.823118] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 16.823124] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 16.823126] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 16.823129] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 16.823131] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved [ 16.823134] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 16.823534] PCI: Bridge: 0000:00:08.0 [ 16.823535] IO window: disabled. [ 16.823539] MEM window: feb00000-febfffff [ 16.823541] PREFETCH window: disabled. [ 16.823544] PCI: Bridge: 0000:00:0b.0 [ 16.823545] IO window: disabled. [ 16.823547] MEM window: disabled. [ 16.823549] PREFETCH window: disabled. [ 16.823551] PCI: Bridge: 0000:00:0c.0 [ 16.823552] IO window: disabled. [ 16.823554] MEM window: disabled. [ 16.823556] PREFETCH window: disabled. [ 16.823558] PCI: Bridge: 0000:00:0d.0 [ 16.823559] IO window: disabled. [ 16.823561] MEM window: disabled. [ 16.823563] PREFETCH window: disabled. [ 16.823565] PCI: Bridge: 0000:00:0e.0 [ 16.823566] IO window: disabled. [ 16.823568] MEM window: disabled. [ 16.823569] PREFETCH window: disabled. [ 16.823571] PCI: Bridge: 0000:00:0f.0 [ 16.823573] IO window: disabled. [ 16.823574] MEM window: disabled. [ 16.823576] PREFETCH window: disabled. [ 16.823578] PCI: Bridge: 0000:00:10.0 [ 16.823579] IO window: disabled. [ 16.823581] MEM window: disabled. [ 16.823583] PREFETCH window: disabled. [ 16.823585] PCI: Bridge: 0000:00:11.0 [ 16.823586] IO window: disabled. [ 16.823588] MEM window: disabled. [ 16.823590] PREFETCH window: disabled. [ 16.823599] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 16.823609] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 16.823615] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 16.823622] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 16.823628] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 16.823633] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 16.823639] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 16.823645] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 16.823707] NET: Registered protocol family 2 [ 16.827019] Time: acpi_pm clocksource has been installed. [ 16.827036] Switched to high resolution mode on CPU 0 [ 16.827427] Switched to high resolution mode on CPU 1 [ 16.859082] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 16.859862] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 16.861925] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 16.862454] TCP: Hash tables configured (established 262144 bind 65536) [ 16.862458] TCP reno registered [ 16.871110] checking if image is initramfs... it is [ 17.533361] Freeing initrd memory: 7935k freed [ 17.538593] audit: initializing netlink socket (disabled) [ 17.538606] audit(1208875749.376:1): initialized [ 17.540781] VFS: Disk quotas dquot_6.5.1 [ 17.540855] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.540991] io scheduler noop registered [ 17.540993] io scheduler anticipatory registered [ 17.540995] io scheduler deadline registered [ 17.541106] io scheduler cfq registered (default) [ 17.631107] Boot video device is 0000:00:12.0 [ 17.631278] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 17.631299] assign_interrupt_mode Found MSI capability [ 17.631318] Allocate Port Service[0000:00:0b.0:pcie00] [ 17.631381] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 17.631402] assign_interrupt_mode Found MSI capability [ 17.631417] Allocate Port Service[0000:00:0c.0:pcie00] [ 17.631474] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 17.631495] assign_interrupt_mode Found MSI capability [ 17.631510] Allocate Port Service[0000:00:0d.0:pcie00] [ 17.631568] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 17.631588] assign_interrupt_mode Found MSI capability [ 17.631603] Allocate Port Service[0000:00:0e.0:pcie00] [ 17.631662] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 17.631682] assign_interrupt_mode Found MSI capability [ 17.631697] Allocate Port Service[0000:00:0f.0:pcie00] [ 17.631757] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 17.631778] assign_interrupt_mode Found MSI capability [ 17.631792] Allocate Port Service[0000:00:10.0:pcie00] [ 17.631849] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 17.631869] assign_interrupt_mode Found MSI capability [ 17.631884] Allocate Port Service[0000:00:11.0:pcie00] [ 17.661507] Real Time Clock Driver v1.12ac [ 17.661606] Linux agpgart interface v0.102 [ 17.661608] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.661732] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.661862] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 17.662376] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.663121] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.663192] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 17.663331] PNP: No PS/2 controller found. Probing ports directly. [ 17.666402] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.666411] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.683901] mice: PS/2 mouse device common for all mice [ 17.683948] cpuidle: using governor ladder [ 17.683950] cpuidle: using governor menu [ 17.684085] NET: Registered protocol family 1 [ 17.684146] registered taskstats version 1 [ 17.684276] Magic number: 4:911:839 [ 17.684349] hash matches device ptyu5 [ 17.684401] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 17.684404] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 17.684407] EDD information not available. [ 17.684418] Freeing unused kernel memory: 316k freed [ 18.896845] fuse init (API version 7.9) [ 19.275213] usbcore: registered new interface driver usbfs [ 19.275237] usbcore: registered new interface driver hub [ 19.275268] usbcore: registered new device driver usb [ 19.276315] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 19.276767] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 19.276777] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 19.276965] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 19.276973] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 19.277216] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 19.277238] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfea7f000 [ 19.309408] SCSI subsystem initialized [ 19.333065] usb usb1: configuration #1 chosen from 1 choice [ 19.333094] hub 1-0:1.0: USB hub found [ 19.333103] hub 1-0:1.0: 6 ports detected [ 19.368672] libata version 3.00 loaded. [ 19.435408] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22 [ 19.435422] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [UB11] -> GSI 22 (level, low) -> IRQ 22 [ 19.435615] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 19.435622] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 19.435682] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 19.435705] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfea7d000 [ 19.493008] usb usb2: configuration #1 chosen from 1 choice [ 19.493034] hub 2-0:1.0: USB hub found [ 19.493042] hub 2-0:1.0: 6 ports detected [ 19.594693] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 19.595122] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 19.595133] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 19.595139] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 19.737446] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 19.961717] usb 1-1: configuration #1 chosen from 1 choice [ 20.113951] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:3b:22:f9 [ 20.113956] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 20.114522] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 [ 20.114533] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 20 [ 20.114720] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 20.114728] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 20.114803] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 20.114833] ehci_hcd 0000:00:02.1: debug port 1 [ 20.114837] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 20.114849] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfea7ec00 [ 20.265410] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 20.277142] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.277264] usb usb3: configuration #1 chosen from 1 choice [ 20.277289] hub 3-0:1.0: USB hub found [ 20.277297] hub 3-0:1.0: 6 ports detected [ 20.381573] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 23 [ 20.381578] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [UB12] -> GSI 23 (level, low) -> IRQ 23 [ 20.381768] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 20.381775] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 20.381839] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 20.381870] ehci_hcd 0000:00:04.1: debug port 1 [ 20.381874] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 20.381881] ehci_hcd 0000:00:04.1: irq 23, io mem 0xfea7e800 [ 20.465031] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.465145] usb usb4: configuration #1 chosen from 1 choice [ 20.465170] hub 4-0:1.0: USB hub found [ 20.465177] hub 4-0:1.0: 6 ports detected [ 20.569639] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 [ 20.569651] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 19 [ 20.574255] pata_amd 0000:00:06.0: version 0.3.10 [ 20.574308] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 20.619827] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 20.621812] scsi0 : pata_amd [ 20.621892] scsi1 : pata_amd [ 20.622944] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 20.622947] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 20.786992] ata1.00: ATA-7: Maxtor 6L250R0, BAJ41G20, max UDMA/133 [ 20.786996] ata1.00: 490234752 sectors, multi 16: LBA48 [ 20.802870] ata1.00: configured for UDMA/133 [ 20.802649] ata2: port disabled. ignoring. [ 20.803039] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L250R0 BAJ4 PQ: 0 ANSI: 5 [ 20.805287] ahci 0000:00:09.0: version 3.0 [ 20.805700] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 20.805703] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 20.861078] usb 2-1: device not accepting address 2, error -62 [ 21.172913] usb 1-1: USB disconnect, address 2 [ 21.808563] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 21.808568] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 21.808571] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 21.808851] scsi2 : ahci [ 21.809186] scsi3 : ahci [ 21.809367] scsi4 : ahci [ 21.809296] scsi5 : ahci [ 21.809413] ata3: SATA max UDMA/133 abar m8192@0xfea76000 port 0xfea76100 irq 22 [ 21.809417] ata4: SATA max UDMA/133 abar m8192@0xfea76000 port 0xfea76180 irq 22 [ 21.809419] ata5: SATA max UDMA/133 abar m8192@0xfea76000 port 0xfea76200 irq 22 [ 21.809422] ata6: SATA max UDMA/133 abar m8192@0xfea76000 port 0xfea76280 irq 22 [ 21.892657] ieee1394: Host added: ID:BUS[0-00:1023] GUID[008f1300c3050300] [ 21.909508] usb 4-4: new high speed USB device using ehci_hcd and address 3 [ 22.044066] usb 4-4: configuration #1 chosen from 1 choice [ 22.345265] usb 2-1: new low speed USB device using ohci_hcd and address 4 [ 22.451939] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 22.457548] ata3.00: ATA-7: SAMSUNG HD250HJ, FH100-05, max UDMA7 [ 22.457552] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 22.462921] ata3.00: configured for UDMA/133 [ 22.575467] usb 2-1: configuration #1 chosen from 1 choice [ 22.578291] usbcore: registered new interface driver libusual [ 22.583136] Initializing USB Mass Storage driver... [ 22.879972] usb 1-1: new low speed USB device using ohci_hcd and address 3 [ 23.099590] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 23.100964] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100, ATAPI AN [ 23.102180] usb 1-1: configuration #1 chosen from 1 choice [ 23.104970] scsi6 : SCSI emulation for USB Mass Storage devices [ 23.105054] usbcore: registered new interface driver usb-storage [ 23.105057] USB Mass Storage support registered. [ 23.105191] usb-storage: device found at 3 [ 23.105193] usb-storage: waiting for device to settle before scanning [ 23.257633] ata4.00: configured for UDMA/100 [ 23.579319] ata5: SATA link down (SStatus 0 SControl 300) [ 23.895146] ata6: SATA link down (SStatus 0 SControl 300) [ 23.895267] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5 [ 23.896200] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5 [ 23.929565] Driver 'sd' needs updating - please use bus_type methods [ 23.929662] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 23.929675] sd 0:0:0:0: [sda] Write Protect is off [ 23.929677] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.929695] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.929753] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 23.929765] sd 0:0:0:0: [sda] Write Protect is off [ 23.929767] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.929784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.929788] sda:<6>usbcore: registered new interface driver hiddev [ 23.948918] input: USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input1 [ 23.950681] sda1 sda2 [ 23.950754] sd 0:0:0:0: [sda] Attached SCSI disk [ 23.950821] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 23.950834] sd 2:0:0:0: [sdb] Write Protect is off [ 23.950837] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 23.950853] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.950896] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 23.950906] sd 2:0:0:0: [sdb] Write Protect is off [ 23.950908] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 23.950928] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.950932] sdb: sdb2 sdb3 sdb4 [ 23.956477] Driver 'sr' needs updating - please use bus_type methods [ 23.965789] sd 2:0:0:0: [sdb] Attached SCSI disk [ 23.970732] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.970755] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 23.970775] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 23.976448] input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:04.0-1 [ 23.976477] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 23.976481] Uniform CD-ROM driver Revision: 3.20 [ 23.976526] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 23.998764] input: USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input2 [ 24.016427] input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:04.0-1 [ 24.030975] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/input/input3 [ 24.056394] input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:02.0-1 [ 24.056415] usbcore: registered new interface driver usbhid [ 24.056419] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 24.209528] Attempting manual resume [ 24.209533] swsusp: Resume From Partition 8:20 [ 24.209534] PM: Checking swsusp image. [ 24.209683] PM: Resume from disk failed. [ 24.236581] kjournald starting. Commit interval 5 seconds [ 24.236854] EXT3-fs: mounted filesystem with ordered data mode. [ 28.105273] usb-storage: device scan complete [ 28.106365] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 28.108358] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 28.110356] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 28.112354] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 28.116392] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 28.116423] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 28.120385] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 28.120409] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 28.124387] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 28.124414] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 28.128372] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 28.128397] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 32.862420] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 32.934311] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 32.962330] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 33.111183] parport_pc 00:05: reported by Plug and Play ACPI [ 33.111237] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 33.184385] irda_init() [ 33.184408] NET: Registered protocol family 23 [ 33.211277] input: Power Button (FF) as /devices/virtual/input/input5 [ 33.286089] ACPI: Power Button (FF) [PWRF] [ 33.286166] input: Power Button (CM) as /devices/virtual/input/input6 [ 33.330067] ACPI: Power Button (CM) [PWRB] [ 33.613411] nvidia: module license 'NVIDIA' taints kernel. [ 34.101159] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 [ 34.101164] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [SGRU] -> GSI 21 (level, low) -> IRQ 21 [ 34.101171] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 34.101335] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 34.215946] ACPI: WMI-Acer: Mapper loaded [ 34.541827] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 34.541833] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20 [ 34.542026] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 34.585297] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 36.444073] loop: module loaded [ 36.468747] lp0: using parport0 (interrupt-driven). [ 37.276844] EXT3 FS on sdb2, internal journal [ 37.425964] device-mapper: uevent: version 1.0.3 [ 37.426000] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 38.277766] kjournald starting. Commit interval 5 seconds [ 38.283654] EXT3 FS on sda1, internal journal [ 38.283659] EXT3-fs: mounted filesystem with ordered data mode. [ 39.155052] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.618022] No dock devices found. [ 39.991302] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2300 processors (2 cpu cores) (version 2.20.00) [ 39.991108] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0xe [ 39.991113] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xf [ 39.991115] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 41.994830] NET: Registered protocol family 10 [ 41.995067] lo: Disabled Privacy Extensions [ 42.231631] ppdev: user-space parallel port driver [ 42.501185] audit(1208875775.142:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5764 profile="/usr/sbin/cupsd" namespace="default" [ 45.691664] Clocksource tsc unstable (delta = -115599757 ns) [ 48.047704] NET: Registered protocol family 17 [ 55.478009] eth0: no IPv6 routers present