craig@zounds:~$ dmesg [ 0.000000] Linux version 2.6.24-16-386 (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 Thu Apr 10 12:50:06 UTC 2008 (Ubuntu 2.6.24-16.30-386) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4f00 [ 0.000000] Entering add_active_range(0, 0, 524000) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524000 [ 0.000000] On node 0 totalpages: 524000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292323 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F68B0 checksum 0 [ 0.000000] ACPI: RSDP 000F68B0, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7FEE3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 7FEE3180, 4042 (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7FEE0000, 0040 [ 0.000000] ACPI: HPET 7FEE7340, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG 7FEE73C0, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC 7FEE7240, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT 7FEE7440, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT 7FEE78D0, 0275 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:40100000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519907 [ 0.000000] Kernel command line: root=UUID=5168fa00-7fec-4f01-aba3-1cc73c516897 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2666.835 MHz processor. [ 22.850711] Console: colour VGA+ 80x25 [ 22.850714] console [tty0] enabled [ 22.850926] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 22.851125] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 22.893744] Memory: 2066728k/2096000k available (2067k kernel code, 28064k reserved, 968k data, 360k init, 1178496k highmem) [ 22.893748] virtual kernel memory layout: [ 22.893749] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB) [ 22.893750] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 22.893751] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 22.893751] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 22.893752] .init : 0xc03fa000 - 0xc0454000 ( 360 kB) [ 22.893753] .data : 0xc0304fb4 - 0xc03f73a4 ( 968 kB) [ 22.893753] .text : 0xc0100000 - 0xc0304fb4 (2067 kB) [ 22.893755] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 22.893784] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 22.893877] hpet clockevent registered [ 22.973672] Calibrating delay using timer specific routine.. 5336.79 BogoMIPS (lpj=10673588) [ 22.973686] Security Framework initialized [ 22.973690] SELinux: Disabled at boot. [ 22.973697] AppArmor: AppArmor initialized [ 22.973700] Failure registering capabilities with primary security module. [ 22.973704] Mount-cache hash table entries: 512 [ 22.973775] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 00000000 [ 22.973780] monitor/mwait feature present. [ 22.973781] using mwait in idle threads. [ 22.973783] CPU: L1 I cache: 32K, L1 D cache: 32K [ 22.973784] CPU: L2 cache: 4096K [ 22.973786] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001 00000000 [ 22.973790] Compat vDSO mapped to ffffe000. [ 22.973798] CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b [ 22.973801] Checking 'hlt' instruction... OK. [ 22.990622] Freeing SMP alternatives: 0k freed [ 22.990685] Early unpacking initramfs... done [ 23.195225] ACPI: Core revision 20070126 [ 23.195250] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 23.197510] ENABLING IO-APIC IRQs [ 23.197663] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 23.344777] net_namespace: 64 bytes [ 23.344785] Booting paravirtualized kernel on bare hardware [ 23.345071] Time: 2:00:10 Date: 05/09/08 [ 23.345083] NET: Registered protocol family 16 [ 23.345180] EISA bus registered [ 23.345183] ACPI: bus type pci registered [ 23.350888] PCI: PCI BIOS revision 3.00 entry at 0xfae10, last bus=2 [ 23.350889] PCI: Using configuration type 1 [ 23.350890] Setting up standard PCI resources [ 23.351854] ACPI: EC: Look up EC in DSDT [ 23.354570] ACPI: Interpreter enabled [ 23.354574] ACPI: (supports S0 S3 S4 S5) [ 23.354583] ACPI: Using IOAPIC for interrupt routing [ 23.357226] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 23.357530] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 23.357533] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 23.357904] PCI: Transparent bridge - 0000:00:1e.0 [ 23.357918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 23.358005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 23.362892] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 23.362952] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 23.363012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 23.363073] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 23.363132] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 23.363190] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 23.363249] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 23.363308] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 23.363371] Linux Plug and Play Support v0.97 (c) Adam Belay [ 23.363387] pnp: PnP ACPI init [ 23.363391] ACPI: bus type pnp registered [ 23.364796] pnpacpi: exceeded the max number of mem resources: 12 [ 23.364867] pnp: PnP ACPI: found 13 devices [ 23.364868] ACPI: ACPI bus type pnp unregistered [ 23.364871] PnPBIOS: Disabled by ACPI PNP [ 23.364977] PCI: Using ACPI for IRQ routing [ 23.364978] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 23.392618] NET: Registered protocol family 8 [ 23.392619] NET: Registered protocol family 20 [ 23.392641] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 23.392644] hpet0: 3 64-bit timers, 14318180 Hz [ 23.393662] AppArmor: AppArmor Filesystem Enabled [ 23.396613] Time: tsc clocksource has been installed. [ 23.404636] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 23.404639] system 00:01: ioport range 0x290-0x29f has been reserved [ 23.404641] system 00:01: ioport range 0x800-0x87f has been reserved [ 23.404642] system 00:01: ioport range 0x290-0x294 has been reserved [ 23.404644] system 00:01: ioport range 0x880-0x88f has been reserved [ 23.404650] system 00:09: ioport range 0x400-0x4bf could not be reserved [ 23.404655] system 00:0a: iomem range 0xc0000000-0xcfffffff could not be reserved [ 23.404659] system 00:0b: iomem range 0xce000-0xcffff has been reserved [ 23.404661] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 23.404663] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 23.404665] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 23.404667] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 23.404669] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 23.404671] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved [ 23.404673] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 23.404675] system 00:0b: iomem range 0xfed13000-0xfed1dfff could not be reserved [ 23.404678] system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 23.404680] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 23.404682] system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 23.434848] PCI: Bridge: 0000:00:01.0 [ 23.434849] IO window: c000-cfff [ 23.434851] MEM window: e0000000-e2ffffff [ 23.434853] PREFETCH window: d0000000-dfffffff [ 23.434855] PCI: Bridge: 0000:00:1e.0 [ 23.434857] IO window: d000-dfff [ 23.434860] MEM window: e3000000-e4ffffff [ 23.434862] PREFETCH window: e5000000-e50fffff [ 23.434870] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.434873] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 23.434879] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 23.434885] NET: Registered protocol family 2 [ 23.472573] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 23.472715] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 23.472975] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 23.473042] TCP: Hash tables configured (established 131072 bind 65536) [ 23.473044] TCP reno registered [ 23.484611] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 23.680222] it is [ 23.887061] Freeing initrd memory: 7041k freed [ 23.887415] audit: initializing netlink socket (disabled) [ 23.887425] audit(1210298410.888:1): initialized [ 23.887534] highmem bounce pool size: 64 pages [ 23.888480] VFS: Disk quotas dquot_6.5.1 [ 23.888492] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 23.888566] io scheduler noop registered [ 23.888568] io scheduler anticipatory registered [ 23.888569] io scheduler deadline registered [ 23.888575] io scheduler cfq registered (default) [ 23.888636] Boot video device is 0000:01:00.0 [ 23.888688] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 23.888707] assign_interrupt_mode Found MSI capability [ 23.888723] Allocate Port Service[0000:00:01.0:pcie00] [ 23.888833] isapnp: Scanning for PnP cards... [ 24.240903] isapnp: No Plug & Play device found [ 24.254381] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 24.254469] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 24.254825] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 24.255190] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 24.255225] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 24.255294] PNP: No PS/2 controller found. Probing ports directly. [ 24.255563] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 24.255566] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 24.258571] mice: PS/2 mouse device common for all mice [ 24.258626] EISA: Probing bus 0 at eisa.0 [ 24.258646] EISA: Detected 0 cards. [ 24.258648] cpuidle: using governor ladder [ 24.258717] NET: Registered protocol family 1 [ 24.258733] Using IPI Shortcut mode [ 24.258747] registered taskstats version 1 [ 24.258799] Magic number: 8:837:4 [ 24.258802] hash matches device ttybf [ 24.258824] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 24.258825] EDD information not available. [ 24.258941] Freeing unused kernel memory: 360k freed [ 25.380592] fuse init (API version 7.9) [ 25.391123] ACPI: Processor [CPU0] (supports 8 throttling states) [ 25.748469] usbcore: registered new interface driver usbfs [ 25.748482] usbcore: registered new interface driver hub [ 25.754473] usbcore: registered new device driver usb [ 25.755079] USB Universal Host Controller Interface driver v3.0 [ 25.755108] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17 [ 25.755115] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 25.755117] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 25.755241] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 25.755261] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e300 [ 25.755325] usb usb1: configuration #1 chosen from 1 choice [ 25.755337] hub 1-0:1.0: USB hub found [ 25.755340] hub 1-0:1.0: 2 ports detected [ 25.828376] SCSI subsystem initialized [ 25.858234] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 25.858240] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 25.858243] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 25.858255] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 25.858274] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e000 [ 25.858335] usb usb2: configuration #1 chosen from 1 choice [ 25.858347] hub 2-0:1.0: USB hub found [ 25.858350] hub 2-0:1.0: 2 ports detected [ 25.866179] libata version 3.00 loaded. [ 25.936227] Floppy drive(s): fd0 is 1.44M [ 25.953798] FDC 0 is a post-1991 82077 [ 25.961957] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 25.961962] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 25.961964] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 25.961976] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 25.961995] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e100 [ 25.962053] usb usb3: configuration #1 chosen from 1 choice [ 25.962065] hub 3-0:1.0: USB hub found [ 25.962068] hub 3-0:1.0: 2 ports detected [ 26.065694] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 26.065699] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 26.065701] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 26.065713] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 26.065733] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200 [ 26.065792] usb usb4: configuration #1 chosen from 1 choice [ 26.065804] hub 4-0:1.0: USB hub found [ 26.065807] hub 4-0:1.0: 2 ports detected [ 26.169465] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17 [ 26.169472] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 26.169474] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 26.169487] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 26.173376] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 26.173379] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xe5100000 [ 26.189320] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.189379] usb usb5: configuration #1 chosen from 1 choice [ 26.189392] hub 5-0:1.0: USB hub found [ 26.189395] hub 5-0:1.0: 8 ports detected [ 26.293147] r8169 Gigabit Ethernet driver 2.2LK loaded [ 26.293164] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 26.293308] eth0: RTL8169sc/8110sc at 0xf8846000, 00:1a:4d:9f:10:98, XID 18000000 IRQ 20 [ 26.293993] ata_piix 0000:00:1f.2: version 2.12 [ 26.293996] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 26.294011] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 26.294026] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 26.294466] scsi0 : ata_piix [ 26.294737] scsi1 : ata_piix [ 26.295065] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 26.295067] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 26.668242] ata1.00: HPA unlocked: 781420655 -> 781422768, native 781422768 [ 26.668246] ata1.00: ATA-7: ST3400633AS, 3.AAH, max UDMA/133 [ 26.668248] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 26.719944] ata1.00: configured for UDMA/133 [ 27.043642] ata2.00: ATAPI: SONY DVD RW DRU-810A, 1.0e, max UDMA/33 [ 27.055074] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 27.215133] ata2.00: configured for UDMA/33 [ 27.215192] scsi 0:0:0:0: Direct-Access ATA ST3400633AS 3.AA PQ: 0 ANSI: 5 [ 27.217250] scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-810A 1.0e PQ: 0 ANSI: 5 [ 27.223102] Driver 'sd' needs updating - please use bus_type methods [ 27.223131] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) [ 27.223137] sd 0:0:0:0: [sda] Write Protect is off [ 27.223138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.223146] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.223168] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) [ 27.223173] sd 0:0:0:0: [sda] Write Protect is off [ 27.223174] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.223182] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.223183] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 27.238590] sda1 sda2 <<6>usb 3-1: configuration #1 chosen from 1 choice [ 27.259390] sda5 > [ 27.259448] sd 0:0:0:0: [sda] Attached SCSI disk [ 27.262265] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 27.262275] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 27.278472] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 27.278474] Uniform CD-ROM driver Revision: 3.20 [ 27.278499] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 27.479095] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 27.503182] Attempting manual resume [ 27.503184] swsusp: Resume From Partition 8:5 [ 27.503185] PM: Checking swsusp image. [ 27.503312] PM: Resume from disk failed. [ 27.542264] kjournald starting. Commit interval 5 seconds [ 27.542269] EXT3-fs: mounted filesystem with ordered data mode. [ 27.658660] usb 4-2: configuration #1 chosen from 1 choice [ 27.661633] usbcore: registered new interface driver hiddev [ 27.678498] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input1 [ 27.689449] input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.2-1 [ 27.701609] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input2 [ 27.713369] input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.3-2 [ 27.713374] usbcore: registered new interface driver usbhid [ 27.713376] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 35.896347] Real Time Clock Driver v1.12ac [ 35.944555] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 36.376519] Linux agpgart interface v0.102 [ 36.388667] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 36.389789] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.392775] parport_pc 00:08: reported by Plug and Play ACPI [ 36.392814] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 36.395379] parport0: Device ID reading stopped before device told data not available. Current idlen 0 of 4, len bytes 00 8D [ 36.395410] parport0: Printer, Hewlett-Packard HP LaserJet 4100 Series [ 36.398643] iTCO_vendor_support: vendor-support=0 [ 36.399303] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 36.399331] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 36.399349] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 36.423424] intel_rng: FWH not detected [ 36.629926] input: Power Button (FF) as /devices/virtual/input/input4 [ 36.658070] ACPI: Power Button (FF) [PWRF] [ 36.658108] input: Power Button (CM) as /devices/virtual/input/input5 [ 36.686000] ACPI: Power Button (CM) [PWRB] [ 36.811225] Linux video capture interface: v2.00 [ 37.025061] bttv: driver version 0.9.17 loaded [ 37.025063] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 37.025085] bttv: Bt8xx card found (0). [ 37.025103] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 37.025111] bttv0: Bt878 (rev 17) at 0000:02:01.0, irq: 18, latency: 32, mmio: 0xe5000000 [ 37.025320] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 37.025322] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 37.025341] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] [ 37.027820] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 37.058465] tveeprom 0-0050: Hauppauge model 44801, rev D110, serial# 6632641 [ 37.058467] tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) [ 37.058469] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) [ 37.058470] tveeprom 0-0050: audio processor is None (idx 0) [ 37.058471] tveeprom 0-0050: has no radio [ 37.058472] bttv0: Hauppauge eeprom indicates model#44801 [ 37.058473] bttv0: tuner type=2 [ 37.096912] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 37.105175] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 37.117292] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 37.244806] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 37.244819] tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) [ 37.244820] tuner 0-0061: type set to Philips NTSC (FI123 [ 37.244822] tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) [ 37.244824] tuner 0-0061: type set to Philips NTSC (FI123 [ 37.320253] bttv0: registered device video0 [ 37.320263] bttv0: registered device vbi0 [ 37.320282] bttv0: PLL: 28636363 => 35468950 .. ok [ 37.444544] nvidia: module license 'NVIDIA' taints kernel. [ 37.763422] bt878: AUDIO driver version 0.0.0 loaded [ 37.763435] bt878: Bt878 AUDIO function found (0). [ 37.763450] ACPI: PCI Interrupt 0000:02:01.1[A] -> GSI 19 (level, low) -> IRQ 18 [ 37.763454] bt878_probe: card id=[0x13eb0070], Unknown card. [ 37.763455] Exiting.. [ 37.763458] ACPI: PCI interrupt for device 0000:02:01.1 disabled [ 37.763461] bt878: probe of 0000:02:01.1 failed with error -22 [ 37.997521] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.997526] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 37.997594] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 48.350776] lp0: using parport0 (interrupt-driven). [ 48.396058] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k [ 48.929991] EXT3 FS on sda1, internal journal [ 49.982658] ip_tables: (C) 2000-2006 Netfilter Core Team [ 50.312434] No dock devices found. [ 52.348780] r8169: eth0: link up [ 52.500263] ppdev: user-space parallel port driver [ 52.620255] NET: Registered protocol family 10 [ 52.620356] lo: Disabled Privacy Extensions [ 52.821213] audit(1210298440.504:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4793 profile="/usr/sbin/cupsd" namespace="default" [ 52.856769] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 52.856771] apm: overridden by ACPI. [ 53.042245] Bluetooth: Core ver 2.11 [ 53.043060] NET: Registered protocol family 31 [ 53.043062] Bluetooth: HCI device and connection manager initialized [ 53.043064] Bluetooth: HCI socket layer initialized [ 53.068392] Bluetooth: L2CAP ver 2.9 [ 53.068394] Bluetooth: L2CAP socket layer initialized [ 53.137016] Bluetooth: RFCOMM socket layer initialized [ 53.137238] Bluetooth: RFCOMM TTY layer initialized [ 53.137240] Bluetooth: RFCOMM ver 1.8 [ 57.888817] NET: Registered protocol family 17 [ 74.315980] eth0: no IPv6 routers present craig@zounds:~$