[ 0.000000] Crash kernel location must be 0x2000000 [ 0.000000] Reserving 0MB of memory at 32MB for crashkernel (System RAM: 1536MB) [ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000) [ 0.000000] Linux version 2.6.24-12-powerpc (buildd@adare) (gcc version 4.1.3 20080308 (prerelease) (Ubuntu 4.1.2-21ubuntu1)) #1 Wed Mar 12 22:31:50 UTC 2008 (Ubuntu 2.6.24-12.22-powerpc) [ 0.000000] Found initrd at 0xc1a00000:0xc2202800 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xfdfc0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: iBook G4 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] console [udbg0] enabled [ 0.000000] Entering add_active_range(0, 0, 393216) 0 entries of 256 used [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=228, gen1=229 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 196608 [ 0.000000] Normal 196608 -> 196608 [ 0.000000] HighMem 196608 -> 393216 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 393216 [ 0.000000] On node 0 totalpages: 393216 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] HighMem zone: 1536 pages used for memmap [ 0.000000] HighMem zone: 195072 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144 [ 0.000000] Kernel command line: root=/dev/hda5 ro quiet splash [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 18.432000 MHz [ 0.000000] time_init: processor frequency = 1420.000000 MHz [ 0.000006] clocksource: timebase mult[d9038e4] shift[22] registered [ 0.000016] clockevent: decrementer mult[4b7] shift[16] cpu[0] [ 0.000094] Console: colour dummy device 80x25 [ 0.000102] console handover: boot [udbg0] -> real [tty0] [ 0.000932] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.002188] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.173996] High memory: 786432k [ 0.174005] Memory: 1541756k/1572864k available (3608k kernel code, 816372k reserved, 148k data, 351k bss, 208k init) [ 0.174106] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 0.174114] Calibrating delay loop... 36.73 BogoMIPS (lpj=73472) [ 0.244255] Security Framework initialized [ 0.244279] SELinux: Disabled at boot. [ 0.244328] AppArmor: AppArmor initialized [ 0.244339] Failure registering capabilities with primary security module. [ 0.244358] Mount-cache hash table entries: 512 [ 0.244757] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.247541] net_namespace: 64 bytes [ 0.248639] NET: Registered protocol family 16 [ 0.249482] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.249493] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1 [ 0.249525] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.249532] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0 [ 0.249546] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.249553] channel 1 bus [ 0.249557] channel 2 bus [ 0.250135] PCI: Probing PCI hardware [ 0.253002] PCI: Cannot allocate resource region 0 of device 0001:10:18.0 [ 0.253028] PCI: Cannot allocate resource region 0 of device 0001:10:19.0 [ 0.253066] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 0.253075] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 0.264423] NET: Registered protocol family 8 [ 0.264432] NET: Registered protocol family 20 [ 0.264594] AppArmor: AppArmor Filesystem Enabled [ 0.265456] NET: Registered protocol family 2 [ 0.268236] Time: timebase clocksource has been installed. [ 0.268260] Switched to high resolution mode on CPU 0 [ 0.300383] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.301113] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.303437] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.304014] TCP: Hash tables configured (established 131072 bind 65536) [ 0.304022] TCP reno registered [ 0.312619] checking if image is initramfs... it is [ 1.955908] Freeing initrd memory: 6144k freed [ 1.956934] Freeing initrd memory: 2054k freed [ 1.957292] Thermal assist unit not available [ 1.957447] setup_kcore: restrict size=3fffffff [ 1.957844] Registering PowerMac CPU frequency driver [ 1.957853] Low: 710 Mhz, High: 1420 Mhz, Boot: 710 Mhz [ 1.964671] audit: initializing netlink socket (disabled) [ 1.964700] audit(1206098329.964:1): initialized [ 1.964953] highmem bounce pool size: 64 pages [ 1.967638] VFS: Disk quotas dquot_6.5.1 [ 1.967685] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.967987] io scheduler noop registered [ 1.967992] io scheduler anticipatory registered [ 1.967995] io scheduler deadline registered [ 1.968013] io scheduler cfq registered (default) [ 1.968614] PCI: Enabling device 0000:00:10.0 (0006 -> 0007) [ 2.164158] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 [ 2.164168] radeonfb: Retrieved PLL infos from Open Firmware [ 2.164172] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=183.00 Mhz, System=210.00 MHz [ 2.164176] radeonfb: PLL min 12000 max 35000 [ 2.263942] i2c-adapter i2c-2: unable to read EDID block. [ 2.415936] i2c-adapter i2c-2: unable to read EDID block. [ 2.567936] i2c-adapter i2c-2: unable to read EDID block. [ 2.921222] radeonfb: Monitor 1 type LCD found [ 2.921226] radeonfb: EDID probed [ 2.921229] radeonfb: Monitor 2 type no found [ 2.921239] radeonfb: Using Firmware dividers 0x00020074 from PPLL 0 [ 2.921298] radeonfb: Dynamic Clock Power Management enabled [ 2.948025] Console: switching to colour frame buffer device 128x48 [ 2.963861] radeonfb: Backlight initialized (radeonbl0) [ 2.963865] radeonfb (0000:00:10.0): ATI Radeon NV [ 3.003952] Generic RTC Driver v1.07 [ 3.004024] Macintosh non-volatile memory driver v1.1 [ 3.005146] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 3.005259] MacIO PCI driver attached to Intrepid chipset [ 3.006434] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 3.006644] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 3.006651] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.006684] adb: starting probe task... [ 3.008135] PCI: Enabling device 0002:20:0d.0 (0000 -> 0002) [ 3.032754] adb devices: [2]: 2 c3 [7]: 7 1f [ 3.038143] ADB keyboard at 2, handler 1 [ 3.038152] Detected ADB keyboard, type ANSI. [ 3.038262] input: ADB keyboard as /devices/virtual/input/input1 [ 3.048315] input: ADB Powerbook buttons as /devices/virtual/input/input2 [ 3.060239] adb: finished probe task... [ 4.024242] ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39 [ 4.024254] Probing IDE interface ide0... [ 4.984423] hda: TOSHIBA MK6025GAS, ATA DISK drive [ 4.984449] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.984495] hda: UDMA/100 mode selected [ 4.984572] ide0 at 0xf1022000-0xf1022007,0xf1022160 on irq 39 [ 6.004241] ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24 [ 6.004252] Probing IDE interface ide1... [ 6.740418] hdc: MATSHITADVD-R UJ-845E, ATAPI CD/DVD-ROM drive [ 6.740439] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.740590] hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } [ 6.740596] hdc: set_drive_speed_status: error=0x04 { AbortedCommand } [ 6.740604] hdc: MWDMA2 mode selected [ 6.740826] ide1 at 0xf1014000-0xf1014007,0xf1014160 on irq 24 [ 6.752326] mice: PS/2 mouse device common for all mice [ 6.752477] PowerMac i2c bus pmu 2 registered [ 6.752529] PowerMac i2c bus pmu 1 registered [ 6.752580] PowerMac i2c bus mac-io 0 registered [ 6.752631] PowerMac i2c bus uni-n 1 registered [ 6.752781] NET: Registered protocol family 1 [ 6.752859] registered taskstats version 1 [ 6.753116] input: PMU as /devices/virtual/input/input3 [ 6.764312] Registered led device: pmu-front-led [ 6.764323] Freeing unused kernel memory: 208k init [ 8.234914] fuse init (API version 7.9) [ 9.232703] PCI: Enabling device 0001:10:12.0 (0004 -> 0006) [ 9.303508] ssb: SPROM revision 2 detected. [ 9.320345] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 [ 9.460389] usbcore: registered new interface driver usbfs [ 9.460432] usbcore: registered new interface driver hub [ 9.484333] usbcore: registered new device driver usb [ 9.486626] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.486708] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 9.486729] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 9.486746] PCI: Enabling device 0001:10:1a.0 (0000 -> 0002) [ 9.486765] ohci_hcd 0001:10:1a.0: OHCI Host Controller [ 9.487191] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1 [ 9.487230] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 [ 9.560584] usb usb1: configuration #1 chosen from 1 choice [ 9.560624] hub 1-0:1.0: USB hub found [ 9.560639] hub 1-0:1.0: 2 ports detected [ 9.664455] PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) [ 9.664481] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 9.664541] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2 [ 9.664572] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 [ 9.740009] usb usb2: configuration #1 chosen from 1 choice [ 9.740049] hub 2-0:1.0: USB hub found [ 9.740064] hub 2-0:1.0: 3 ports detected [ 9.852228] PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) [ 9.852264] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 9.852310] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3 [ 9.852336] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 [ 9.929559] usb usb3: configuration #1 chosen from 1 choice [ 9.929601] hub 3-0:1.0: USB hub found [ 9.929616] hub 3-0:1.0: 2 ports detected [ 9.984283] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 10.048270] PCI: Enabling device 0001:10:1b.2 (0004 -> 0006) [ 10.048293] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 10.048338] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4 [ 10.048403] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 [ 10.166651] hda: max request size: 512KiB [ 10.184263] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 10.184469] usb usb4: configuration #1 chosen from 1 choice [ 10.184506] hub 4-0:1.0: USB hub found [ 10.184519] hub 4-0:1.0: 5 ports detected [ 10.217366] hda: 117210240 sectors (60011 MB), CHS=16383/255/63 [ 10.217434] hda: cache flushes supported [ 10.217525] hda:<6>usb 1-1: configuration #1 chosen from 1 choice [ 10.231991] [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 [ 10.288670] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 10.356598] PHY ID: 4061e4, addr: 0 [ 10.357474] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:14:51:14:04:1c [ 10.357478] eth0: Found BCM5221 PHY [ 10.357540] PCI: Enabling device 0002:20:0e.0 (0000 -> 0002) [ 10.408552] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 10.506109] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 10.506128] Uniform CD-ROM driver Revision: 3.20 [ 10.524297] usb 1-2: new full speed USB device using ohci_hcd and address 3 [ 10.741475] usb 1-2: configuration #1 chosen from 1 choice [ 11.920165] usbcore: registered new interface driver hiddev [ 11.924502] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001451fffe14041c] [ 11.936855] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.0/input/input4 [ 11.952387] input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1 [ 11.968814] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.1/input/input5 [ 11.984377] input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1 [ 11.984439] usbcore: registered new interface driver usbhid [ 11.984446] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 12.485063] Attempting manual resume [ 12.555895] EXT3-fs: INFO: recovery required on readonly filesystem. [ 12.555906] EXT3-fs: write access will be enabled during recovery. [ 17.927103] kjournald starting. Commit interval 5 seconds [ 17.927143] EXT3-fs: hda5: orphan cleanup on readonly fs [ 17.927156] ext3_orphan_cleanup: deleting unreferenced inode 345543 [ 18.342476] ext3_orphan_cleanup: deleting unreferenced inode 345542 [ 18.342494] ext3_orphan_cleanup: deleting unreferenced inode 345541 [ 18.342508] ext3_orphan_cleanup: deleting unreferenced inode 345540 [ 18.347190] ext3_orphan_cleanup: deleting unreferenced inode 345384 [ 18.351950] ext3_orphan_cleanup: deleting unreferenced inode 345383 [ 18.360316] ext3_orphan_cleanup: deleting unreferenced inode 345726 [ 18.372027] ext3_orphan_cleanup: deleting unreferenced inode 343630 [ 18.375255] ext3_orphan_cleanup: deleting unreferenced inode 345693 [ 18.386421] ext3_orphan_cleanup: deleting unreferenced inode 342598 [ 18.395626] ext3_orphan_cleanup: deleting unreferenced inode 342128 [ 18.400669] ext3_orphan_cleanup: deleting unreferenced inode 345667 [ 18.400684] ext3_orphan_cleanup: deleting unreferenced inode 345666 [ 18.400697] ext3_orphan_cleanup: deleting unreferenced inode 345665 [ 18.408873] ext3_orphan_cleanup: deleting unreferenced inode 345664 [ 18.409085] ext3_orphan_cleanup: deleting unreferenced inode 345663 [ 18.418599] ext3_orphan_cleanup: deleting unreferenced inode 345501 [ 18.418615] ext3_orphan_cleanup: deleting unreferenced inode 345497 [ 18.418629] ext3_orphan_cleanup: deleting unreferenced inode 345493 [ 18.418642] ext3_orphan_cleanup: deleting unreferenced inode 345492 [ 18.423667] ext3_orphan_cleanup: deleting unreferenced inode 345491 [ 18.423858] ext3_orphan_cleanup: deleting unreferenced inode 345482 [ 18.423873] ext3_orphan_cleanup: deleting unreferenced inode 342603 [ 18.423888] ext3_orphan_cleanup: deleting unreferenced inode 277795 [ 18.438984] ext3_orphan_cleanup: deleting unreferenced inode 460668 [ 18.438997] ext3_orphan_cleanup: deleting unreferenced inode 460535 [ 18.439005] EXT3-fs: hda5: 26 orphan inodes deleted [ 18.439008] EXT3-fs: recovery complete. [ 18.445670] EXT3-fs: mounted filesystem with ordered data mode. [ 23.685944] hda: UDMA/100 mode selected [ 26.019749] Linux agpgart interface v0.102 [ 26.026885] agpgart: Detected Apple UniNorth 2 chipset [ 26.027014] agpgart: configuring for size idx: 8 [ 26.027107] agpgart: AGP aperture is 32M @ 0x0 [ 29.332343] b43-phy0: Broadcom 4318 WLAN found [ 29.444826] phy0: Selected rate control algorithm 'simple' [ 29.744246] appletouch: Geyser mode initialized. [ 29.744425] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb1/1-2/1-2:1.0/input/input6 [ 29.772473] usbcore: registered new interface driver appletouch [ 33.280695] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 33.280802] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 33.281545] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 35.599510] snd-aoa-fabric-layout: found bus with layout 92 [ 35.599519] snd-aoa-fabric-layout: Using PMF GPIOs [ 35.610247] snd-aoa-codec-tas: found tas3004 [ 35.610286] snd-aoa-fabric-layout: can use this codec [ 35.675380] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a [ 36.177151] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. [ 36.315349] apm_emu: PMU APM Emulation initialized. [ 36.472921] SCSI subsystem initialized [ 36.536817] adt746x: version 1 (supported) [ 36.536829] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1 [ 36.536834] sensor 0: PWR/MEMORY BOTTOMSIDE [ 36.536837] sensor 1: CPU BOTTOMSIDE [ 36.536839] sensor 2: GPU BOTTOMSIDE [ 36.537856] adt746x: ADT7467 initializing [ 36.545967] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70 [ 36.971383] Adding 749992k swap on /dev/hda6. Priority:-1 extents:1 across:749992k [ 37.728922] EXT3 FS on hda5, internal journal [ 49.598539] kjournald starting. Commit interval 5 seconds [ 49.604286] EXT3 FS on hda3, internal journal [ 49.604295] EXT3-fs: mounted filesystem with ordered data mode. [ 49.665953] kjournald starting. Commit interval 5 seconds [ 49.673053] EXT3 FS on hda7, internal journal [ 49.673060] EXT3-fs: mounted filesystem with ordered data mode. [ 50.898090] ip_tables: (C) 2000-2006 Netfilter Core Team [ 54.250293] appletouch: incomplete data package (first byte: 0, length: 17). [ 55.320384] hda: host max PIO4 wanted PIO0 selected PIO0 [ 55.477652] lp: driver loaded but no devices found [ 55.671299] ppdev: user-space parallel port driver [ 56.272747] audit(1206098384.397:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=4595 profile="/usr/sbin/cupsd" namespace="default" [ 58.384270] input: b43-phy0 as /devices/virtual/input/input7 [ 59.877198] Registered led device: b43-phy0:tx [ 59.877839] Registered led device: b43-phy0:rx [ 59.878236] Registered led device: b43-phy0:radio [ 60.796378] Bluetooth: Core ver 2.11 [ 60.797784] NET: Registered protocol family 31 [ 60.797792] Bluetooth: HCI device and connection manager initialized [ 60.797798] Bluetooth: HCI socket layer initialized [ 61.108350] Bluetooth: L2CAP ver 2.9 [ 61.108364] Bluetooth: L2CAP socket layer initialized [ 61.156766] usb 1-1: USB disconnect, address 2 [ 61.216914] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108 [ 61.504335] Bluetooth: RFCOMM socket layer initialized [ 61.504372] Bluetooth: RFCOMM TTY layer initialized [ 61.504376] Bluetooth: RFCOMM ver 1.8 [ 61.524304] usb 1-1: new full speed USB device using ohci_hcd and address 4 [ 61.624625] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 61.896497] usb 1-1: configuration #1 chosen from 1 choice [ 62.686929] Bluetooth: HCI USB driver ver 2.9 [ 62.690269] usbcore: registered new interface driver hci_usb [ 62.770995] [drm] Initialized drm 1.1.0 20060810 [ 62.807385] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 64.682154] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 4x mode [ 64.682944] agpgart: Putting AGP V2 device at 0000:00:10.0 into 4x mode [ 65.039676] [drm] Setting GART location based on new memory map [ 65.039697] [drm] Loading R300 Microcode [ 65.039753] [drm] writeback test succeeded in 1 usecs [ 88.710376] NET: Registered protocol family 10 [ 88.711430] lo: Disabled Privacy Extensions [ 88.712566] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 88.713633] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 104.864662] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 110.041129] NET: Registered protocol family 17 [ 111.212616] wlan0: Initial auth_alg=0 [ 111.212633] wlan0: authenticate with AP 00:18:39:bc:cb:e1 [ 111.214297] wlan0: RX authentication from 00:18:39:bc:cb:e1 (alg=0 transaction=2 status=0) [ 111.214308] wlan0: authenticated [ 111.214312] wlan0: associate with AP 00:18:39:bc:cb:e1 [ 111.216497] wlan0: RX AssocResp from 00:18:39:bc:cb:e1 (capab=0x411 status=0 aid=2) [ 111.216507] wlan0: associated [ 111.217750] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 121.384239] wlan0: no IPv6 routers present [ 133.532255] wlan0: no IPv6 routers present