[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-5-generic (buildd@palmer) (gcc version 4.3.1 (Ubuntu 4.3.1-7ubuntu1) ) #1 SMP Sat Jul 26 21:35:46 UTC 2008 (Ubuntu 2.6.26-5.13-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) [ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff90000 (usable) [ 0.000000] BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Warning only 4GB will be used. [ 0.000000] Use a HIGHMEM64G enabled kernel. [ 0.000000] 3200MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1048576 [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 36 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4060 pages, LIFO batch:0 [ 0.000000] Normal zone: 1980 pages used for memmap [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7200 pages used for memmap [ 0.000000] HighMem zone: 812000 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F99B0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT BFF90000, 003C (r1 7514MS A7514200 20080702 MSFT 97) [ 0.000000] ACPI: FACP BFF90200, 0084 (r1 7514MS A7514200 20080702 MSFT 97) [ 0.000000] ACPI: DSDT BFF905C0, 64FA (r1 A7514 A7514200 200 INTL 20051117) [ 0.000000] ACPI: FACS BFF9E000, 0040 [ 0.000000] ACPI: APIC BFF90390, 006C (r1 7514MS A7514200 20080702 MSFT 97) [ 0.000000] ACPI: MCFG BFF90400, 003C (r1 7514MS OEMMCFG 20080702 MSFT 97) [ 0.000000] ACPI: SLIC BFF90440, 0176 (r1 7514MS A7514200 20080702 MSFT 97) [ 0.000000] ACPI: OEMB BFF9E040, 0072 (r1 7514MS A7514200 20080702 MSFT 97) [ 0.000000] ACPI: HPET BFF985C0, 0038 (r1 7514MS OEMHPET 20080702 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000) [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 41384 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1039360 [ 0.000000] Kernel command line: root=/dev/sda3 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 3165.229 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 3094084k/4194304k available (2484k kernel code, 49856k reserved, 1124k data, 372k init, 2227776k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc74000 - 0xfffff000 (3628 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc048f000 - 0xc04ec000 ( 372 kB) [ 0.004000] .data : 0xc036d22e - 0xc0486540 (1124 kB) [ 0.004000] .text : 0xc0100000 - 0xc036d22e (2484 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.083867] Calibrating delay using timer specific routine.. 6334.54 BogoMIPS (lpj=12669090) [ 0.083878] Security Framework initialized [ 0.083884] SELinux: Disabled at boot. [ 0.083895] AppArmor: AppArmor initialized [ 0.083898] AppArmor: Registered secondary security module capability [ 0.083900] Capability LSM initialized as secondary [ 0.083905] Mount-cache hash table entries: 512 [ 0.083998] Initializing cgroup subsys ns [ 0.084002] Initializing cgroup subsys cpuacct [ 0.084003] Initializing cgroup subsys memory [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084005] CPU: L2 cache: 3072K [ 0.084005] CPU: Physical Processor ID: 0 [ 0.084005] CPU: Processor Core ID: 0 [ 0.084005] using mwait in idle threads. [ 0.084005] Checking 'hlt' instruction... OK. [ 0.100006] Early unpacking initramfs... done [ 0.296018] ACPI: Core revision 20080321 [ 0.308019] ENABLING IO-APIC IRQs [ 0.308019] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.347664] CPU0: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz stepping 06 [ 0.348021] Booting processor 1/1 ip 6000 [ 0.356022] Initializing CPU#1 [ 0.356022] Calibrating delay using timer specific routine.. 12027.11 BogoMIPS (lpj=24054237) [ 0.356022] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.356022] CPU: L2 cache: 3072K [ 0.356022] CPU: Physical Processor ID: 0 [ 0.356022] CPU: Processor Core ID: 1 [ 0.432880] CPU1: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz stepping 06 [ 0.432891] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.440027] Brought up 2 CPUs [ 0.440027] Total of 2 processors activated (18361.66 BogoMIPS). [ 0.440027] CPU0 attaching sched-domain: [ 0.440027] domain 0: span 0-1 [ 0.440027] groups: 0 1 [ 0.440027] CPU1 attaching sched-domain: [ 0.440027] domain 0: span 0-1 [ 0.440027] groups: 1 0 [ 0.440027] net_namespace: 660 bytes [ 0.440027] Booting paravirtualized kernel on bare hardware [ 0.440027] NET: Registered protocol family 16 [ 0.440027] EISA bus registered [ 0.440027] ACPI: bus type pci registered [ 0.440027] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.440027] PCI: Not using MMCONFIG. [ 0.440027] PCI: Using configuration type 1 for base access [ 0.440027] Setting up standard PCI resources [ 0.440027] ACPI: EC: Look up EC in DSDT [ 0.445899] ACPI: Interpreter enabled [ 0.445901] ACPI: (supports S0 S1 S3 S4 S5) [ 0.445911] ACPI: Using IOAPIC for interrupt routing [ 0.445948] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.448028] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.448028] PCI: Using MMCONFIG for extended config space [ 0.456028] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.456028] PCI: Transparent bridge - 0000:00:1e.0 [ 0.456028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.456028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.456028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.456028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.456028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.460028] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.460028] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.460028] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.460028] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.460028] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.460028] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.460028] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.460028] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15) [ 0.460028] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 97, should be 92 [20080321] [ 0.460028] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.460028] pnp: PnP ACPI init [ 0.460028] ACPI: bus type pnp registered [ 0.464029] pnp: PnP ACPI: found 16 devices [ 0.464029] ACPI: ACPI bus type pnp unregistered [ 0.464029] PnPBIOS: Disabled by ACPI PNP [ 0.464029] PCI: Using ACPI for IRQ routing [ 0.471623] NET: Registered protocol family 8 [ 0.471624] NET: Registered protocol family 20 [ 0.472526] NetLabel: Initializing [ 0.472526] NetLabel: domain hash size = 128 [ 0.472526] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.472526] NetLabel: unlabeled traffic allowed by default [ 0.472526] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.472526] hpet0: 4 64-bit timers, 14318180 Hz [ 0.472526] AppArmor: AppArmor Filesystem Enabled [ 0.472526] ACPI: RTC can wake from S4 [ 0.479442] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.479444] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved [ 0.479450] system 00:08: ioport range 0x4c0-0x4ff has been reserved [ 0.479451] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.479453] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.479454] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.479456] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.479457] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.479459] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.479463] system 00:0b: iomem range 0xffc00000-0xffefffff could not be reserved [ 0.479466] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.479468] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.479471] system 00:0d: ioport range 0xa00-0xadf has been reserved [ 0.479472] system 00:0d: ioport range 0xae0-0xaef has been reserved [ 0.479476] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved [ 0.479479] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 0.479481] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved [ 0.479482] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 0.479484] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved [ 0.479485] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.505011] Switched to high resolution mode on CPU 1 [ 0.508177] Switched to high resolution mode on CPU 0 [ 0.509007] PCI: Bridge: 0000:00:01.0 [ 0.509007] IO window: c000-cfff [ 0.509007] MEM window: 0xfe900000-0xfe9fffff [ 0.509007] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.509007] PCI: Bridge: 0000:00:1c.0 [ 0.509007] IO window: d000-dfff [ 0.509007] MEM window: 0xfea00000-0xfeafffff [ 0.509007] PREFETCH window: disabled. [ 0.509007] PCI: Bridge: 0000:00:1c.1 [ 0.509007] IO window: disabled. [ 0.509007] MEM window: disabled. [ 0.509007] PREFETCH window: disabled. [ 0.509007] PCI: Bridge: 0000:00:1c.5 [ 0.509007] IO window: e000-efff [ 0.509007] MEM window: 0xfeb00000-0xfebfffff [ 0.509007] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff [ 0.509007] PCI: Bridge: 0000:00:1e.0 [ 0.509007] IO window: disabled. [ 0.509007] MEM window: disabled. [ 0.509007] PREFETCH window: disabled. [ 0.509007] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.509007] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.509007] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.509007] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.509007] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.509007] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.509007] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.509007] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 0.509007] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.509007] NET: Registered protocol family 2 [ 0.525001] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.525001] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.525001] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.525001] TCP: Hash tables configured (established 131072 bind 65536) [ 0.525001] TCP reno registered [ 0.529013] NET: Registered protocol family 1 [ 0.529066] checking if image is initramfs... it is [ 0.916345] Freeing initrd memory: 7349k freed [ 0.916998] audit: initializing netlink socket (disabled) [ 0.916998] type=2000 audit(1215079253.908:1): initialized [ 0.921001] highmem bounce pool size: 64 pages [ 0.921001] Total HugeTLB memory allocated, 0 [ 0.921001] VFS: Disk quotas dquot_6.5.1 [ 0.921001] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.921001] msgmni has been set to 1708 [ 0.921001] io scheduler noop registered [ 0.921001] io scheduler anticipatory registered [ 0.921001] io scheduler deadline registered [ 0.921001] io scheduler cfq registered (default) [ 0.921001] pci 0000:01:00.0: Boot video device [ 0.921001] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.921001] assign_interrupt_mode Found MSI capability [ 0.921001] Allocate Port Service[0000:00:01.0:pcie00] [ 0.921001] Allocate Port Service[0000:00:01.0:pcie03] [ 0.921001] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.921001] assign_interrupt_mode Found MSI capability [ 0.921001] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.921001] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.921001] Allocate Port Service[0000:00:1c.0:pcie03] [ 0.921001] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.921001] assign_interrupt_mode Found MSI capability [ 0.921001] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.921001] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.921001] Allocate Port Service[0000:00:1c.1:pcie03] [ 0.921001] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 0.921001] assign_interrupt_mode Found MSI capability [ 0.921001] Allocate Port Service[0000:00:1c.5:pcie00] [ 0.921001] Allocate Port Service[0000:00:1c.5:pcie02] [ 0.921001] Allocate Port Service[0000:00:1c.5:pcie03] [ 0.921001] isapnp: Scanning for PnP cards... [ 1.588999] isapnp: No Plug & Play device found [ 1.608473] hpet_resources: 0xfed00000 is busy [ 1.608473] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.608473] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.608473] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.608474] brd: module loaded [ 1.608474] input: Macintosh mouse button emulation as /class/input/input0 [ 1.608474] PNP: No PS/2 controller found. Probing ports directly. [ 1.610575] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.610578] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.612652] mice: PS/2 mouse device common for all mice [ 1.612652] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.612652] rtc0: alarms up to one month, y3k [ 1.612652] EISA: Probing bus 0 at eisa.0 [ 1.612652] EISA: Detected 0 cards. [ 1.612652] cpuidle: using governor ladder [ 1.612652] cpuidle: using governor menu [ 1.612652] aufs 20080609 [ 1.612652] Using IPI No-Shortcut mode [ 1.612652] registered taskstats version 1 [ 1.612652] rtc_cmos 00:03: setting system clock to 2008-07-03 10:00:55 UTC (1215079255) [ 1.612652] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.612652] EDD information not available. [ 1.612652] Freeing unused kernel memory: 372k freed [ 1.754192] uvesafb: failed to execute /sbin/v86d [ 1.754192] uvesafb: make sure that the v86d helper is installed and executable [ 1.754192] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 1.754192] uvesafb: vbe_init() failed with -22 [ 1.754192] uvesafb: probe of uvesafb.0 failed with error -22 [ 1.786187] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.786187] ACPI: ACPI0007:01 is registered as cooling_device1 [ 1.985808] usbcore: registered new interface driver usbfs [ 1.985808] usbcore: registered new interface driver hub [ 1.985808] usbcore: registered new device driver usb [ 1.985808] USB Universal Host Controller Interface driver v3.0 [ 1.985808] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.985808] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 1.985808] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.985808] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.985808] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 [ 1.985808] usb usb1: configuration #1 chosen from 1 choice [ 1.985808] hub 1-0:1.0: USB hub found [ 1.985808] hub 1-0:1.0: 2 ports detected [ 2.090722] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 2.090722] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 2.090722] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.090722] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 2.090723] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 2.090723] usb usb2: configuration #1 chosen from 1 choice [ 2.090723] hub 2-0:1.0: USB hub found [ 2.090723] hub 2-0:1.0: 2 ports detected [ 2.090723] No dock devices found. [ 2.095017] SCSI subsystem initialized [ 2.119237] libata version 3.00 loaded. [ 2.195704] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19 [ 2.195704] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 2.195704] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.195704] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 2.195704] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800 [ 2.195704] usb usb3: configuration #1 chosen from 1 choice [ 2.195704] hub 3-0:1.0: USB hub found [ 2.195704] hub 3-0:1.0: 2 ports detected [ 2.299708] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 2.299708] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 2.299708] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.299708] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4 [ 2.303703] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.303703] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 2.303703] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8ffc00 [ 2.316074] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.316115] usb usb4: configuration #1 chosen from 1 choice [ 2.316130] hub 4-0:1.0: USB hub found [ 2.316133] hub 4-0:1.0: 6 ports detected [ 2.420029] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 2.420034] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 2.420036] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.420050] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.420070] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 [ 2.420111] usb usb5: configuration #1 chosen from 1 choice [ 2.420127] hub 5-0:1.0: USB hub found [ 2.420130] hub 5-0:1.0: 2 ports detected [ 2.527825] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 2.527825] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 2.527825] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.527825] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.527825] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 2.527825] usb usb6: configuration #1 chosen from 1 choice [ 2.527825] hub 6-0:1.0: USB hub found [ 2.527825] hub 6-0:1.0: 2 ports detected [ 2.643610] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 2.643610] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 2.643610] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.643610] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.643610] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080 [ 2.643610] usb usb7: configuration #1 chosen from 1 choice [ 2.643610] hub 7-0:1.0: USB hub found [ 2.643610] hub 7-0:1.0: 2 ports detected [ 2.748142] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 2.748142] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 2.748142] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.748142] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 2.751610] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.751610] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 2.751610] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800 [ 2.764144] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.764175] usb usb8: configuration #1 chosen from 1 choice [ 2.764191] hub 8-0:1.0: USB hub found [ 2.764195] hub 8-0:1.0: 6 ports detected [ 2.871395] r8169 Gigabit Ethernet driver 2.2LK loaded [ 2.871395] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 2.871395] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 2.871395] eth0: RTL8168c/8111c at 0xf8876000, 00:1d:92:f6:9d:af, XID 3c4000c0 IRQ 219 [ 2.871395] ahci 0000:02:00.0: version 3.0 [ 2.871395] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 2.991468] usb 4-3: new high speed USB device using ehci_hcd and address 2 [ 3.133034] usb 4-3: configuration #1 chosen from 1 choice [ 3.637977] usb 4-6: new high speed USB device using ehci_hcd and address 4 [ 3.795040] usb 4-6: configuration #1 chosen from 1 choice [ 3.796407] hub 4-6:1.0: USB hub found [ 3.796407] hub 4-6:1.0: 4 ports detected [ 3.913693] usbcore: registered new interface driver libusual [ 3.913693] Initializing USB Mass Storage driver... [ 3.965719] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 3.965721] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 3.965726] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 3.969690] scsi0 : ahci [ 3.969690] scsi1 : ahci [ 3.969690] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16 [ 3.969690] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16 [ 4.165686] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 4.331371] ata1: SATA link down (SStatus 0 SControl 300) [ 4.399351] usb 2-2: configuration #1 chosen from 1 choice [ 4.399351] scsi2 : SCSI emulation for USB Mass Storage devices [ 4.399351] usb-storage: device found at 2 [ 4.399351] usb-storage: waiting for device to settle before scanning [ 4.701778] usb 4-6.1: new low speed USB device using ehci_hcd and address 5 [ 4.761278] ata2: SATA link down (SStatus 0 SControl 300) [ 4.761278] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 4.761278] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.761278] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 4.761278] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 [ 4.761278] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 4.761278] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 4.761278] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001) [ 4.761278] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 4.761278] PCI: Setting latency timer of device 0000:02:00.1 to 64 [ 4.761278] ACPI: PCI interrupt for device 0000:02:00.1 disabled [ 4.765278] ata_piix 0000:00:1f.2: version 2.12 [ 4.765278] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 4.765278] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 4.765278] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.765278] scsi3 : ata_piix [ 4.765278] scsi4 : ata_piix [ 4.769278] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 [ 4.769278] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 [ 4.849325] usb 4-6.1: configuration #1 chosen from 1 choice [ 5.070854] usb 4-6.2: new low speed USB device using ehci_hcd and address 6 [ 5.198477] usb 4-6.2: configuration #1 chosen from 1 choice [ 5.206483] usbcore: registered new interface driver hiddev [ 5.209763] usbcore: registered new interface driver usb-storage [ 5.209763] USB Mass Storage support registered. [ 5.210021] input: Logitech USB Trackball as /class/input/input1 [ 5.211594] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.7-6.1 [ 5.222567] input: Dell Dell USB Keyboard as /class/input/input2 [ 5.226495] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-6.2 [ 5.226504] usbcore: registered new interface driver usbhid [ 5.226505] usbhid: v2.6:USB HID core driver [ 5.256994] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.311981] ata3.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 5.311981] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 5.389705] ata3.00: configured for UDMA/133 [ 5.975688] ata4: SATA link down (SStatus 0 SControl 300) [ 5.983668] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 5.983668] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 [ 5.983668] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 5.983668] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 5.983668] scsi5 : ata_piix [ 5.983668] scsi6 : ata_piix [ 5.983668] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 [ 5.983668] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 [ 6.392559] ata5: SATA link down (SStatus 0 SControl 300) [ 6.719688] ata6: SATA link down (SStatus 0 SControl 300) [ 6.723682] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 6.723682] PCI: Setting latency timer of device 0000:02:00.1 to 64 [ 6.723682] scsi7 : pata_jmicron [ 6.723682] scsi8 : pata_jmicron [ 6.723682] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 6.723682] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 6.725178] Driver 'sd' needs updating - please use bus_type methods [ 6.725178] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 6.725178] sd 3:0:0:0: [sda] Write Protect is off [ 6.725178] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.725178] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.725178] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 6.725178] sd 3:0:0:0: [sda] Write Protect is off [ 6.725178] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.725178] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.725178] sda: sda1 sda2 sda3 [ 6.746203] sd 3:0:0:0: [sda] Attached SCSI disk [ 6.747205] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 7.135251] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 7.135252] SGI XFS Quota Management subsystem [ 7.145625] XFS mounting filesystem sda3 [ 7.244775] Ending clean XFS mount for filesystem: sda3 [ 9.336883] udevd version 124 started [ 10.317681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.371369] Linux agpgart interface v0.103 [ 10.411844] usb-storage: device scan complete [ 10.412766] input: PC Speaker as /class/input/input3 [ 10.412766] scsi 2:0:0:0: CD-ROM TEAC DW-224E-A 1.4A PQ: 0 ANSI: 0 [ 10.412767] scsi 2:0:0:0: Attached scsi generic sg1 type 5 [ 10.467119] input: Power Button (FF) as /class/input/input4 [ 10.530505] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.541837] ACPI: Power Button (FF) [PWRF] [ 10.541904] input: Power Button (CM) as /class/input/input5 [ 10.562785] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 10.562785] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 10.595603] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 10.601836] ACPI: Power Button (CM) [PWRB] [ 10.626080] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 10.626098] PCI: Setting latency timer of device 0000:01:00.1 to 64 [ 10.663913] usblp0: Disabling reads from problematic bidirectional printer [ 10.682978] usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004 [ 10.683001] usbcore: registered new interface driver usblp [ 10.960830] Driver 'sr' needs updating - please use bus_type methods [ 10.960830] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 10.960830] Uniform CD-ROM driver Revision: 3.20 [ 10.960830] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 12.423373] Adding 4008208k swap on /dev/sda2. Priority:-1 extents:1 across:4008208k [ 12.999687] r8169: eth0: link up [ 12.999687] r8169: eth0: link up [ 14.279022] NET: Registered protocol family 17 [ 2786.423390] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 2788.645068] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 2788.645068] apm: disabled - APM is not SMP safe. [ 2883.162402] program swap-offset is using a deprecated SCSI ioctl, please convert it to SG_IO [ 2910.893982] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 2911.543223] Bluetooth: Core ver 2.11 [ 2911.543223] NET: Registered protocol family 31 [ 2911.543223] Bluetooth: HCI device and connection manager initialized [ 2911.543223] Bluetooth: HCI socket layer initialized [ 2911.590407] Bluetooth: L2CAP ver 2.9 [ 2911.590407] Bluetooth: L2CAP socket layer initialized [ 2911.611144] Bluetooth: RFCOMM socket layer initialized [ 2911.611144] Bluetooth: RFCOMM TTY layer initialized [ 2911.611144] Bluetooth: RFCOMM ver 1.8 [ 2988.770167] parport_pc 00:07: reported by Plug and Play ACPI [ 2988.770167] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 2988.871514] lp0: using parport0 (interrupt-driven). [ 2989.097167] ppdev: user-space parallel port driver [ 3283.310476] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 3289.607018] NET: Registered protocol family 10 [ 3289.607018] lo: Disabled Privacy Extensions [ 3293.193048] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 3293.328960] ISO 9660 Extensions: RRIP_1991A [ 3301.257226] eth0: no IPv6 routers present [ 3364.188567] ppdev0: registered pardevice [ 3364.236746] ppdev0: unregistered pardevice [ 3364.433548] ppdev0: registered pardevice [ 3364.481501] ppdev0: unregistered pardevice [ 3364.505648] ppdev0: registered pardevice [ 3364.554478] ppdev0: unregistered pardevice